Installing Your Multifunction to Additional Computers on Your Network PIXMA MX340/ PIXMA MX350/ PIXMA MX870 Mac OS 1
Navigation Tips for Macintosh Users To navigate this guide, please use the arrows on the MAC keyboard or use the PAGE UP and Page DOWN keys.
Installing Your Multifunction to Additional Computers on Your Network PIXMA MX340/ PIXMA MX350/ PIXMA MX870 Mac OS Important Information You Need Before Adding Your Multifunction Installing the Drivers & Software Registering the Printer & Scanner 4 5 10 3
Important Information You Need Before Adding Your Multifunction Important Information You Need Before Adding Your Multifunction Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. If your Multifunction printer has already been setup on another computer in your wireless network, it is only necessary to install the Drivers and software and register the printer and scanner.
Installing the Drivers & Software Installing the Drivers & Software To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.
Installing the Drivers & Software Step Three Step Four Enter your administrator name and password. Click OK. Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together. If you do not know your administrator name or password, click Help , then follow the on-screen instructions.
Installing the Drivers & Software Step Five Step Six Click Install Select Use the printer on network, then click Next. *Applications may vary by model Follow any on-screen instructions to proceed with the software installation.
Installing the Drivers & Software Step Seven Step Eight Read the License Agreement screen carefully and click Yes.
Installing the Drivers & Software Step Nine On the Canon IJ Network Tool screen, choose your model and click Next.
Registering the Printer & Scanner Registering the Printer & Scanner This section describes how to register the machine on a Macintosh computer. Step One When the Register Printer and Scanner screen appears, click Register Printer. Proceed to the section that relates to your operating system for further installation instructions Mac OS X v. 10.5.x / 10.6.x: Go to Step 2-A Mac OS X v. 10.4.
Registering the Printer & Scanner Step Two Step Two 2-A 1. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX340 series shown in example, below 2-B 1. When the Printer List window appears, click Add. 2. Go to Step Three, page 13.
Registering the Printer & Scanner Step Two (cont) Step Two (cont) 2-B 2. Click More Printers in the Printer Browser window. 2-B 3. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number.
Registering the Printer & Scanner Step Two (cont) Step Three 2-B 4. Make sure that the Canon MXxxx series is added to the list of printers. When the Register Printer and Scanner screen appears, click Register Scanner. *xxx refers to the model number. MX340 series shown in above example.
Registering the Printer & Scanner Step Four Step Five Select Canon MXxxx series on the Scan-from-PC Settings screen, then click OK.. *xxx refers to the model number. Click Next on the Register Printer and Scanner screen.
Registering the Printer & Scanner Step Six Step Seven Click Next on the Print Head Alignment Recommended screen. Click Next on the Register Printer and Scanner screen.
Registering the Printer & Scanner Step Eight If the User Registration screen appears, read the information and click Next or Cancel. If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.).
Registering the Printer & Scanner Step Nine Click Exit. Setup is complete *It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
