<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MX420 Windows OS 1
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MX420 Windows OS Preparing to Connect My Multifunction to My Network Network Requirements Important Information You Need Before Adding Your Multifunction Adding Your Multifunction to the Network 3 3 4 5 2
Preparing to Connect My Multifunction To My Network << Previous Next >> Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.
Preparing to Connect My Multifunction To My Network << Previous Next >> An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID.
Adding Your Multifunction to Your Network << Previous Next >> Adding Your Multifunction to Your Network Step One Step Two Press the Setup button (A) Select Wireless LAN setup, and then press the OK button.
Adding Your Multifunction to Your Network << Previous Step Three Step Four Select Yes, then press the OK button. Select Easy setup, and then press the OK button. Next >> When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.
Adding Your Multifunction to Your Network << Previous Next >> Step Five Step Six Select the access point name, then press the OK button. When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the following screen is not displayed, go to step 8 NOTE: If you are living in an apartment, nearby access points in use may be detected. Press the button to switch character entry modes. Network key entry is case-sensitive.
Adding Your Multifunction to Your Network << Previous Next >> Step Seven Step Eight Make sure that the network key is correct, and then press the OK button. When the connected to the access point screen appears, press the OK button. The Setup menu screen returns. NOTE: If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again.
Installing the Drivers & Application Software Step One insert the Setup CD-ROM into the CD-ROM drive. If the program does not start automatically, double-click the CD-ROM icon in Computer orMy Computer, then doubleclick MSETUP4.EXE. <> Step Two Click Easy Install. The drivers, application software, and on-screen manuals are installed. For Windows 7/Windows Vista: Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
Installing the Drivers and Software Step Three On the next screen click Install <> Step Four Select Use the printer with wireless LAN connection, then click Next.
Installing the Drivers and Software <> 11
Installing the Drivers and Software <> 12
Installing the Drivers and Software <> Step Nine Step Ten Turn on the printer and click OK When the Detected Printers List appears, select Canon MX420 series Then click Next.
Installing the Drivers and Software <
