User's Manual

FAX info
does not
match
Transmission has been canceled because the machine could not detect the recipient's fax machine
information or the information did not match the dialed number. This message is displayed when
Check RX FAX info in Security control under Fax settings is set to ON.
For details, see Sending Faxes after Checking Information (Checking the Recipient's Information).
Reception
rejected
Reception has been rejected because the fax matches the fax rejection condition specified by FAX RX
reject in Security control under Fax settings.
For details, see Rejecting Fax Reception.
Waiting for
report
If the machine receives a fax under one of the following conditions, the machine will not be able to print
the reports. When the problem is resolved as described, the reports are printed automatically.
• The amount of remaining ink is insufficient to print a report:
Replace the FINE cartridge.
Replacing a FINE Cartridge
• Paper has run out:
Load the paper and press the OK button.
• A different size of paper from that specified by Page size in FAX paper settings is loaded:
Load the same size of paper as that specified by Page size, then press the OK button.
• You pressed the Stop button to cancel printing of a report:
Press the FAX button to resume printing of the report.
679