MX920 series Online Manual Printing Copying English
Printing Printing from a Computer Printing with Application Software that You are Using (Printer Driver) Printing Using the Operation Panel of the Machine Printing Photo Data Printing Template Forms Such As Lined Paper or Graph Paper Printing Documents (PDF File) Saved on a USB Flash Drive About Disc Label Printing Using Web Service Printing Notice for Web Service Printing Printing Photos in Online Photo Album Downloading and Printing Template Forms Settings for Web Service Printing with Google Cloud Print
Printing from a Computer Printing with Application Software that You are Using (Printer Driver)
Printing Using the Operation Panel of the Machine Printing Photo Data Printing Template Forms Such As Lined Paper or Graph Paper Printing Documents (PDF File) Saved on a USB Flash Drive About Disc Label Printing
Using Web Service Printing Notice for Web Service Printing Printing Photos in Online Photo Album Downloading and Printing Template Forms Settings for Web Service
About Bluetooth Communication Handling Precautions Preparation to Use the Bluetooth Unit Printing Data via Bluetooth Communication Basic Procedure for Printing via Bluetooth Communication Bluetooth Settings Specifications
Copying Making Copies Basic Displaying the Preview Screen Setting Items Reducing or Enlarging a Copy Two-Sided Copying About Other Copy Functions Copying Two Pages to Fit onto a Single Page Copying Four Pages to Fit onto a Single Page Copying Thick Originals Such as Books Copying without Borders Collated Copying Copying Photos
Printing with Application Software that You are Using (Printer Driver) Printing with Easy Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Updating the MP Drivers
Printing with Easy Setup This section describes a simple procedure for specifying Quick Setup tab settings that allow you to perform printing suited to this machine. For details about the Quick Setup tab, see "Quick Setup Tab." 1. Check that the machine is turned on Confirming that the Power Is On 2. Load paper on the machine Loading Paper 3. Open the printer driver setup window How to Open the Printer Driver Setup Window 4.
Important The print quality settings that can be selected may differ depending on a printing profile. 6. Check the paper source Check that Paper Source is set to Cassette. Important The paper size determines whether the upper or lower cassette is used. The cassette to be used is displayed below Paper Source. 7. Complete the setup Click OK. When you execute print, the document is printed with settings that match your purpose.
Important When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well. In the Commonly Used Settings window, click Save... to register the specified settings. Registering a Frequently Used Printing Profile.
Quick Setup Tab The Quick Setup tab is for registering commonly used print settings. When you select a registered setting, the machine automatically switches to the preset items.
Setting the Media Type with the Printer Driver When you use this machine, selecting a media type that matches the print purpose will help you achieve the best print results. You can use the following media types on this machine. Commercially available papers Media name Media Type in the printer driver Plain Paper (including recycled paper) Plain Paper Envelopes Envelope Canon genuine papers (Photo Printing) Media name
Various Printing Methods Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Setting the Stapling Margin Execute Borderless Printing Fit-to-Page Printing Scaled Printing Page Layout Printing Tiling/Poster Printing Booklet Printing Duplex Printing Stamp/Background Printing Registering a Stamp Registering Image Data to be Used as a Background Setting Up Envelope Printing Printing on Postcards Displaying the Print Results before Printing Setting Paper Dimensions (Custom Size) Ed
Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application software. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab.
Setting the Number of Copies and Printing Order The procedure for specifying the number of copies and printing order is as follows: You can also set the number of copies on the Quick Setup tab. 1. Open the printer driver setup window 2. Specify the number of copies to be printed For Copies on the Page Setup tab, specify the number of copies to be printed. 3.
• Print from Last Page: /Collate: 4. Complete the setup Click OK. When you execute print, the specified number of copies will be printed with the specified printing order. Important When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
Setting the Stapling Margin The procedure for setting the staple side and the margin width is as follows: 1. Open the printer driver setup window 2. Specify the side to be stapled Check the position of the stapling margin from Stapling Side on the Page Setup tab. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position. When you want to change the setting, select from the list. 3. Set the margin width If necessary, click Specify Margin...
4. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified staple side and margin width. Important Stapling Side and Specify Margin... appear grayed out and are unavailable when: Borderless, Tiling/Poster, or Booklet is selected for Page Layout Scaled is selected for Page Layout (When Duplex Printing is also selected, only Stapling Side can be specified.
Execute Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
4. Adjust the amount of extension from the paper If necessary, adjust the amount of extension using the Amount of Extension slider. Moving the slider to the right increases the amount extending off the paper, and moving the slider to the left decreases the amount. It is recommended to set the slider at the second position from the right for most cases. Important When the Amount of Extension slider is set to the rightmost position, the back side of the paper may become smudged. 5.
Fit-to-Page Printing The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Open the printer driver setup window 2. Set fit-to-page printing Select Fit-to-Page from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software. 4.
5. Complete the setup Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size.
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Open the printer driver setup window 2. Set scaled printing Select Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software. 4.
• Specify a scaling factor Directly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be printed with the specified scale. Important When the application software which you used to create the original has the scaled printing function, configure the settings on your application software.
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Open the printer driver setup window 2. Set page layout printing Select Page Layout from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the printer driver. 3.
Pages To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. Page Order To change the page arrangement order, select a placement method from the list. Page Border To print a page border around each document page, check this check box. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
Tiling/Poster Printing The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster. The procedure for performing tiling/poster printing is as follows: Setting Tiling/Poster Printing 1. Open the printer driver setup window 2. Set tiling/poster printing Select Tiling/Poster from the Page Layout list on the Page Setup tab.
If necessary, click Specify..., specify the following settings in the Tiling/Poster Printing dialog box, and then click OK. Image Divisions Select the number of divisions (vertical x horizontal). As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allow you to create a larger poster. Print "Cut/Paste" in margins To leave out words "Cut" and "Paste", uncheck this check box.
Note Click the deleted pages to display them again. Right-click the settings preview to select Print all pages or Delete all pages. 2. Complete the setup After completing the page selection, click OK. When you execute print, only specified pages will be printed. Important Since tiling/poster printing enlarges the document when printing it, the print results may become coarse.
Booklet Printing The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center. The procedure for performing booklet printing is as follows: 1. Open the printer driver setup window 2. Set booklet printing Select Booklet from the Page Layout list on the Page Setup tab.
Margin for stapling Select which side should the stapling margin be on when the booklet is completed. Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank. Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width for one page. Page Border To print a page border around each document page, check the check box. 5. Complete the setup Click OK on the Page Setup tab.
Duplex Printing The procedure for printing data on both sides of a sheet of paper is as follows: You can also set duplex printing in Additional Features on the Quick Setup tab. Performing Automatic Duplex Printing You can perform the duplex printing without having to turn over the paper. 1. Open the printer driver setup window 2. Set automatic duplex printing Check the Duplex Printing check box on the Page Setup tab and confirm that Automatic is checked. 3.
Use normal-size printing Print without reducing the page. Use reduced printing Reduce the page slightly during printing. 5. Specify the side to be stapled The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list. 6. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 7. Complete the setup Click OK on the Page Setup tab.
4. Specify the side to be stapled The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list. 5. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 6. Complete the setup Click OK on the Page Setup tab. When you execute print, the document is first printed on one side of a sheet of paper.
Stamp/Background Printing Stamp or Background may be unavailable when certain printer drivers or operating environments are used. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data.
3. Select a stamp Check the Stamp check box, and select the stamp to be used from the list. The current settings are displayed in the settings preview on the left side of the Page Setup tab. 4. Set the stamp details If necessary, specify the following settings, and then click OK. Define Stamp... button To change the stamp text, bitmap, or position, click this (see "Registering a Stamp"). Place stamp over text To print the stamp on the front of the document, check this check box.
Important When Borderless is selected, the Stamp/Background... (Stamp...) button appears grayed out and is unavailable. Note The stamp and background are not printed on blank sheets inserted with the Insert blank page function of booklet printing.
Registering a Stamp This feature may be unavailable when certain printer drivers or operating environments are used. You can create and register a new stamp. You can also change and re-register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time. The procedure for registering a new stamp is as follows: Registering a New Stamp 1. Open the printer driver setup window 2. Click Stamp/Background... (Stamp...
4. Configure the stamp while viewing the preview window • Stamp tab Select Text, Bitmap, or Date/Time/User Name that matches your purpose for Stamp Type. • For Text registration, the characters must already be entered in Stamp Text. If necessary, change the TrueType Font, Style, Size, and Outline settings. You can select the color of the stamp by clicking Select Color.... • For Bitmap, click Select File... and select the bitmap file (.bmp) to be used.
Changing and Registering Some of Stamp Settings 1. Select the stamp for which the settings are to be changed Select the Stamp check box in the Stamp/Background (Stamp) dialog box. Then from the list, select the title of the stamp to be changed. 2. Click Define Stamp... The Stamp Settings dialog box opens. 3. Configure the stamp while viewing the preview window 4. Overwrite save the stamp Click Save overwrite on the Save settings tab.
Registering Image Data to be Used as a Background This feature may be unavailable when certain printer drivers or operating environments are used. You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted. The procedure for registering image data to be used as a background is as follows: Registering New Background 1. Open the printer driver setup window 2.
4. Select the image data to be registered to the background Click Select File.... Select the target bitmap file (.bmp), and then click Open. 5. Specify the following settings while viewing the preview window Layout Method Select how the background image data is to be placed. When Custom is selected, you can set coordinates for X-Position and Y-Position. You can also change the background position by dragging the image in the preview window.
Click Save overwrite on the Save settings tab. When you want to save the background with a different title, enter a new title in the Title box and click Save. Click OK when the confirmation message appears. 5. Complete the setup Click OK, then it returns to Stamp/Background dialog box. The registered title appears in the Background list. Deleting an Unnecessary Background 1. Click Select Background... in the Stamp/Background dialog box The Background Settings dialog box opens. 2.
Setting Up Envelope Printing If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. For details on how to load an envelope into the machine, refer to "Loading Paper." The procedure for performing envelope printing is as follows: 1. Open the printer driver setup window 2. Select the media type Select Envelope from Commonly Used Settings on the Quick Setup tab. 3.
When you execute envelope printing, guide messages are displayed. To hide the guide messages, check the Do not show this message again check box. To show the guide again, click the View Printer Status... button on the Maintenance tab, and start the Canon IJ Status Monitor. Then click Envelope Printing from Display Guide Message of the Option menu to enable the setting.
Printing on Postcards For details about loading postcards into this machine, see "Loading Paper." This section describes the procedure for postcard printing. 1. Open the printer driver setup window 2. Select commonly used settings Display the Quick Setup tab, and for Commonly Used Settings, select Standard. 3. Select the media type For Media Type, select Hagaki A, Ink Jet Hagaki, Hagaki K, or Hagaki. Important This machine cannot print on postcards that have photos or stickers attached.
Displaying the Print Results before Printing If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" when reading this information. You can display and check the print result before printing. The procedure for displaying the print result before printing is as follows: You can also set the print results display on the Quick Setup tab. 1. Open the printer driver setup window 2. Set the preview Check the Preview before printing check box on the Main tab. 3.
Setting Paper Dimensions (Custom Size) You can specify the height and width of paper when its size cannot be selected from the Page Size. Such a paper size is called "custom size." The procedure for specifying a custom size is as follows: You can also set a custom size in Printer Paper Size on the Quick Setup tab. 1. Set the custom size in the application software Specify the custom size in the paper size setting of your application software.
5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified paper size. Important Printing may be disabled depending on the size of the specified user-defined media. For information about printable sizes for user-defined media, see "Media Types You Can Use.
Editing the Print Document or Reprinting from the Print History This function is unavailable when the standard IJ printer driver is used. In the Canon IJ XPS preview window, you can edit the print document or retrieve the document print history to print the document.
1. Open the printer driver setup window 2. Set the preview Check the Preview before printing check box on the Main tab. 3. Complete the setup Click OK. The Canon IJ XPS Preview will start and the print result will be displayed before printing. 4. Editing print documents and print pages • Combining print documents You can combine multiple print documents to form a single document.
Note You can rename Document Name to any name. 5. Executing print Click Print. When you execute print, the printer uses the specified settings to print the data. Reprinting from the Print History When you click Save Print History on the File menu to enable the setting, the document printed from the preview is saved, and you can reprint the document with the same settings. 1. Displaying the print history Select the Start menu -> All Programs -> "Your model name" -> View Print History XPS.
Changing the Print Quality and Correcting Image Data Main Tab Setting the Print Quality Level (Custom) Printing a Color Document in Monochrome Specifying Color Correction Optimal Photo Printing of Image Data Adjusting Colors with the Printer Driver Printing with ICC Profiles Interpreting the ICC Profile Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Intensity Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer
Main Tab On the Main tab, you can specify basic print settings such as the print quality level and color adjustments.
Setting the Print Quality Level (Custom) The print quality level can be set in the Custom. The procedure for setting the print quality level is as follows: 1. Open the printer driver setup window 2. Select the print quality On the Main tab, select Custom for Print Quality, and click Set.... The Custom dialog box opens. 3. Setting the print quality level Drag the slider bar to select the print quality level and click OK. 4. Complete the setup Click OK on the Main tab.
Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast
Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: You can also set a grayscale printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2. Set grayscale printing Check the Grayscale Printing check box on the Main tab. 3. Complete the setup Click OK. When you execute print, the document is converted to grayscale data. It allows you to print the color document in monochrome.
Specifying Color Correction You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. This method is suitable for printing sRGB data. When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively, select ICM (ICC Profile Matching).
Driver Matching With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. ICM (ICC Profile Matching) Adjusts the colors by using an ICC profile when printing. Specify the input profile or rendering intent to be used. None The printer driver does not perform color correction. Select this value when you are specifying an individually created printing ICC profile or a printing ICC profile for special Canon paper in an application software to print data. 4.
Optimal Photo Printing of Image Data When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor. To get the print results as close as possible to the desired color tones, you must select a printing method that is best suited to the application software used or to your purpose. Color Management Devices such as digital cameras, scanners, monitors, and printers handle color differently.
Adjusting Colors with the Printer Driver You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer through the use of Canon Digital Photo Color. When printing from an application software that can identify ICC profiles and allows you to specify them, use a printing ICC profile in the application software, and select settings for color management. The procedure for adjusting colors with the printer driver is as follows: 1.
Printing with ICC Profiles When the image data has a specified input ICC profile, you can print by using the color space (Adobe RGB or sRGB) of the data effectively. The printer driver setting procedure varies depending on the application software used to print.
Specify an ICC Profile with the Printer Driver, and then Print Print from an application software that cannot identify input ICC profiles or does allow you to specify one by using the color space of the input ICC profile (sRGB) found in the data. When printing Adobe RGB data, you can print the data with the Adobe RGB color space even if the application software does not support Adobe RGB. 1. Open the printer driver setup window 2.
This method reproduces images by focusing on color tints that most people prefer. Select this method to print photos. • Relative Colorimetric When image data is converted to the color space of the printer, this method converts the image data so the color reproduction approximates the shared color regions. Select this method to print image data with colors that are close to the original colors.
Interpreting the ICC Profile When you need to specify the machine profile, select the ICC profile for the paper to print on. The ICC profiles installed for this machine appear as follows. • (1) is the model name of the printer. • (2) is the media type. This notation corresponds to the following media type: GL: Photo Paper Plus Glossy II PT: Photo Paper Pro Platinum SG/LU: Photo Paper Plus Semi-gloss / Photo Paper Pro Luster MP: Matte Photo Paper • (3) is the print quality.
Adjusting Color Balance You can adjust the color tints when printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly. Use the printer driver only when you want to adjust the color balance slightly.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver. After adjusting each color, click OK. Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the document is printed with the adjusted color balance.
Adjusting Color Balance Using Sample Patterns (Printer Driver) You can look at the print results of pattern print and adjust the color balance. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values. Described below is the procedure for adjusting the color balance while looking at the pattern. 1. Open the printer driver setup window 2.
4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Cyan/Magenta/Yellow. Important When the Grayscale Printing check box on the Main tab is checked, Cyan/Magenta/Yellow appear grayed out and are unavailable. Printer Paper Size Select the paper size to be used for pattern printing. Note Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box. On the Main tab, select OK, and then execute printing. The machine then prints a pattern in which the color balance that you set is the center value. 6. Adjusting the color balance Look at the print results and select the image that you like best. Then enter the color balance numbers indicated at the bottom of that image into the Cyan, Magenta, and Yellow fields on the Color Adjustment tab.
Click OK on the Main tab. Then when you execute printing, the document is printed with the color balance that was adjusted by the pattern print function. Important When Print a pattern for color adjustment is selected on the Color Adjustment tab, the following items are grayed out and cannot be set: Preview before printing on the Main tab Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing is set, only Stapling Side can be set.
Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed.
4. Complete the setup Click OK on the Main tab. When you execute print, the data is printed at the specified brightness.
Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed.
Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image data is printed with the adjusted intensity.
Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast.
Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image is printed with the adjusted contrast.
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) You can look at the print results of pattern print and adjust the intensity/contrast. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values. Described below is the procedure for adjusting the intensity/contrast while looking at the pattern. 1. Open the printer driver setup window 2.
4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Intensity/Contrast. Printer Paper Size Select the paper size to be used for pattern printing. Note Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected. Amount of Pattern Instances Select Largest, Large, or Small to set the number of patterns to be printed.
6. Adjusting the intensity/contrast Look at the print results and select the image that you like best. Then enter the intensity/contrast numbers indicated at the bottom of that image into the Intensity and Contrast fields on the Color Adjustment tab. Clear the Print a pattern for color adjustment check box, and click OK.
Important When Print a pattern for color adjustment is selected on the Color Adjustment tab, the following items are grayed out and cannot be set: Preview before printing on the Main tab Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing is set, only Stapling Side can be set.) You can print a pattern only if the Page Layout setting on the Page Setup tab is Normal-size or Borderless. Depending on your application software, this function may not be available.
Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Maintenance Tab Canon IJ Status Monitor Checking the Ink Status from Your Computer Canon IJ Preview Deleting the Undesired Print Job Instructions for Use (Printer Driver)
Canon IJ Printer Driver The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this machine. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer. Because different models support different print data formats, you need a printer driver for the specific model you are using.
How to Open the Printer Driver Setup Window The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows. Open the Printer Driver Setup Window through the Application Software Follow the procedure below to configure printing profile when printing. 1. Select the command that you perform printing on the application software In general, select Print on the File menu to open the Print dialog box. 2.
Maintenance Tab The Maintenance tab allows you to perform machine maintenance or change the settings of the machine.
Canon IJ Status Monitor If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. The Canon IJ Status Monitor is an application software that shows the status of the printer and the progress of printing. You will know the status of the printer with graphics, icons, and messages. Launching the Canon IJ Status Monitor The Canon IJ Status Monitor launches automatically when print data is sent to the printer.
Checking the Ink Status from Your Computer If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. You can check the remaining ink level and the ink tank types for your model. 1. Open the printer driver setup window 2. Launching the Canon IJ Status Monitor On the Maintenance tab, click View Printer Status.... The Canon IJ Status Monitor opens and displays an image of the ink status.
Canon IJ Preview The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages. You can also change the media type settings. When you want to display a preview before printing, open the printer driver setup window, click the Main tab, and check the Preview before printing check box.
Deleting the Undesired Print Job If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. If the printer does not start printing, canceled or failed print job data may be remaining. Delete the undesired print job by using the Canon IJ Status Monitor. 1. Display the Canon IJ Status Monitor Click the button of the status monitor displayed on the task bar. The Canon IJ Status Monitor appears. 2.
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled. In this case, use the copies setting in the Print dialog box of the application software.
Points to Note About Applications with Restrictions • There are following restrictions in Microsoft Word (Microsoft Corporation). • When Microsoft Word has the same printing functions as the printer driver, use Word to specify them. • When selecting Fit-to-Page, Scaled, or Page Layout from the Page Layout list on the Page Setup tab, the selected printing function may not be effective, depending on the version of Word. If this happens, follow the procedure below. 1. Open Word's Print dialog box. 2.
Updating the MP Drivers Obtaining the Latest MP Drivers Deleting the Unnecessary MP Drivers Before Installing the MP Drivers Installing the MP Drivers
Obtaining the Latest MP Drivers The MP Drivers include a printer driver, ScanGear (scanner driver), and fax driver. By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved. You can access our website and download the latest MP Drivers for your model. Important You can download the MP Drivers for free, but any Internet access charges incurred are your responsibility. Before installing the latest MP Drivers, delete the previously installed version.
Deleting the Unnecessary MP Drivers The MP Drivers which you no longer use can be deleted. When deleting the MP Drivers, first exit all programs that are running. The procedure to delete the unnecessary MP Drivers is as follows: 1. Start the uninstaller • If you are using Windows 7 or Windows Vista, select Start menu -> Control Panel -> Programs -> Programs and Features. From the program list, select "XXX MP Drivers" (where "XXX" is your model name) and then click Uninstall.
Before Installing the MP Drivers This section describes the items that you should check before installing the MP Drivers. You should also refer to this section if the MP Drivers cannot be installed. Checking the Machine Status • Turn off the machine. Checking the Personal Computer Settings • Terminate all running applications. • In Windows 7, Windows Vista, log on as a user who has the administrator account. In Windows XP, log on as the computer administrator.
Installing the MP Drivers You can access our web site through the Internet and download the latest MP Drivers and XPS printer driver for your model. The procedure for installing the downloaded MP Drivers is as follows: 1. Turn off the machine 2. Start the installer Double-click the icon of the downloaded file. The installation program starts. Important In Windows 7 or Windows Vista, a confirmation/warning dialog box may appear when starting, installing or uninstalling software.
Printing Using the Operation Panel of the Machine Printing Photo Data Printing Template Forms Such As Lined Paper or Graph Paper Printing Documents (PDF File) Saved on a USB Flash Drive About Disc Label Printing
Printing Photo Data Printing Photographs Saved on a USB Flash Drive Setting Items Using Useful Display Functions
Printing Photographs Saved on a USB Flash Drive You can print the photograph saved on the USB flash drive easily. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Load photo paper. Loading Paper 3. Insert the USB flash drive into the USB flash drive port.
The photo selection screen is displayed. Note If both photo files and PDF files are saved on USB flash drive, the confirmation screen to select which file you print is displayed. Select Print photos in the displayed screen, then press the OK button. If no printable photo data is saved on the USB flash drive, Data of supported types are not saved. is displayed on the LCD.
By pressing the center Function button, you can select photo with specifying the date (last modified date of data). Using Useful Display Functions 5. Change view By pressing the left Function button, you can change the display method. Using Useful Display Functions Note If you specify the number of copies for each photo, use the button to display the photo you want to print and use the + or - button to specify the number of copies when the desired photo is displayed.
The reserved photo is printed next to the photo that has already been started printing. If you want to print more photos, operate from step 1 again. Note While processing the print job, you cannot change to the other mode, change the print menu, or print from the computer or other devices. While processing the print job, the photo in other group is not selected. If you press the Stop button while processing the print job, the screen to select a method to cancel reservation is displayed.
Setting Items You can specify the setting of page size, media type, photo fix and so on to print the photos saved on the USB flash drive. Use the button to change the setting item and use the button to change the setting. Note Some settings cannot be specified in combination with the other setting items. If the setting which cannot be specified in combination is selected, Error details is displayed on the LCD. In this case, press the left Function button to confirm the message, then change the setting.
Using Useful Display Functions You can change the method to display the photos saved on the USB flash drive and specify the date (last modified date of data) to select photos. Changing the Method to Display Specifying Date to Select Photo Changing the Method to Display By pressing the left Function button on the photo selection screen, the screen to select a display method is displayed. Use the button to select the display method, then press the OK button. The following methods are selectable.
Printing Template Forms Such As Lined Paper or Graph Paper You can print a template form such as lined paper, graph paper, or checklist, etc. on A4, B5, or Letter-sized plain paper. Printable template forms Printing template forms Note You use the Web service to download the template form and to print it. Downloading and Printing Template Forms Printable template forms The following templates are available: • Notebook paper You can select three line spacing formats.
You can print staff paper with 10 or 12 staves. Setting on the LCD: • Staff paper 1: Staff paper 10 staves • Staff paper 2: Staff paper 12 staves • Handwriting paper You can print handwriting paper. Setting on the LCD: Handwriting paper • Weekly schedule You can print a weekly schedule form. Setting on the LCD: Weekly schedule • Monthly schedule You can print a monthly schedule form. Setting on the LCD: Monthly schedule Printing template forms Print template form following the procedure below. 1.
5. Select Template print, then press the OK button. 6. Use the button to select the template you want to print, then press the OK button. Printable template forms 7. Specify the settings as necessary. 1. Number of copies Use the + or - button to specify the number of copies. 2. Page size Select the page size depending on the loaded paper. Note Depending on the form, some setting of page size cannot be specified. If it is selected, Error details is displayed on the LCD.
Printing Documents (PDF File) Saved on a USB Flash Drive You can print PDF files that are scanned using the operation panel of the machine, PDF files that are saved on the USB flash drive when receiving faxes, or PDF files that are made using Canon IJ Scan Utility or My Image Garden (application software compatible with the machine) from the USB flash drive. Note You can print PDF files from a USB flash drive which satisfy the following conditions.
If both photo files and PDF files are saved on USB flash drive, the confirmation screen to select which file you print is displayed. Select Print documents in the displayed screen, then press the OK button. If no printable document (PDF files) is saved on the USB flash drive, Data of supported types are not saved. is displayed on the LCD. 7. Select the document to print, then press the OK button.
Note When the machine name, IJ Scan Utility, or My Image Garden is displayed in Created with on the Details screen, you can select 2-sided to print onto the both sides of a single sheet of paper. 9. Press the Color button. The machine starts printing. Note You can print up to 250 pages at a time. If you try to print more than 250 pages of a PDF file, The specified PDF file contains too many pages. The pages exceeding the number of printable pages will not be printed. Continue? is displayed on the LCD.
About Disc Label Printing Copying the Label Side of Disc
Copying the Label Side of Disc You can copy the label of an existing BD/DVD/CD and print it on a printable disc. Important You cannot print on 3.15 inches / 8 cm printable discs. Do not attach the disc tray or place the printable disc until the message asking you to set them is displayed. Doing so can damage the machine. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Press the MENU button. The menu screen is displayed. 3. Select Advanced print, then press the OK button.
The print area setting screen is displayed. 5. Specify the print area, then press the OK button. Use the area. button to select Outer circle or Inner circle and use the button to change the print Note Measure the outer and inner diameters of the printing surface of the printable disc and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter. For information on printable discs, contact their manufacturers. 6.
8. Press the Color button for color copying, or the Black button for black & white copying. 9. Follow the on-screen instructions to set the printable disc. Note You can see the procedure to set the printable disc by pressing the left Function button. The next screen is displayed by pressing the OK button. Additionally, pressing the Stop button returns to the print confirmation screen. For details on how to set the printable disc: Placing a Printable Disc 10. Press the OK button.
Using Web Service Printing Notice for Web Service Printing Printing Photos in Online Photo Album Downloading and Printing Template Forms Settings for Web Service
Notice for Web Service Printing When Using Web Service • Canon does not guarantee the continuity and reliability of the web services provided, the availability of site access, or permission to download the materials. • Canon may at any time update, change, or delete the information provided through the web service, or may suspend or discontinue the service without prior notice. Canon shall not be held responsible for any damages resulting from such actions.
Printing Photos in Online Photo Album You can access the internet photo sharing site using the operation panel of the machine and print the photo in online photo album (photos uploaded from devices such as computer). Before using the web service, see the terms of service. Notice for Web Service Printing To access the photo sharing site from the machine, you have to register the account on the photo sharing site to the machine. Refer to the following and register the account.
For details on how to register the account, see Registering the Account on Photo Sharing Site. After the account registration is complete, the confirmation screen to save the login name or e-mail address and password is displayed. Use the button to select the setting, then press the OK button. If you do not save the login name or e-mail address and password to the machine, select Do not save then press the OK button.
A. Page size The page size is set to 4"x6"(10x15cm). B. Type (Media type) Select the media type of the loaded paper. C. Print qlty (Print quality) Select print quality according to the photo. D. Border (Bordered/Borderless print) Select bordered or borderless print. E. Photo fix When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print.
Downloading and Printing Template Forms You can download the template form you want to print from the web service. Before using the web service, see the terms of service. Notice for Web Service Printing Important LAN connection with the machine and internet connection are required to use this function. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Press the MENU button. The menu screen is displayed. 3. Select Template print, then press the OK button. 4.
Settings for Web Service This section describes the machine's settings for web service. Registering the Account on Photo Sharing Site Resetting the Web Service Settings Before using the web service, see the terms of service. Notice for Web Service Printing Registering the Account on Photo Sharing Site Register the account on the photo sharing site to the machine following the procedure below. Important LAN connection with the machine and internet connection are required to use this function.
10. Check that User-ID or Email is displayed, then press the OK button. The screen to enter the login name or e-mail address is displayed. Note If you already have registered the account, the login name or e-mail address is displayed on the screen. 11. Enter the login name or e-mail address. Use the following buttons to enter the login name or e-mail address. , , , and buttons: Select a letter, number, or symbol. OK button: Enter the selected character.
The account registration is complete. Resetting the Web Service Settings This function resets all web service settings. Reset the web service settings following the procedure below. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Press the MENU button. The menu screen is displayed. 3. Select Web service, then press the OK button. 4. Select Web service setup, then press the OK button. 5. Use the button to select Reset Web service setup, then press the OK button.
Printing with Google Cloud Print The machine is compatible with Google Cloud Print™ (Google Cloud Print is a service provided by Google Inc.). By using Google Cloud Print, you can print from anywhere with applications or services supporting Google Cloud Print. 1. Preparations for Printing with Google Cloud Print 2.
Preparations for Printing with Google Cloud Print To print with Google Cloud Print, you need to get Google account and register the machine with Google Cloud Print in advance. Getting Google Account If you already have Google account, register the machine. Registering the Machine with Google Cloud Print Getting Google Account First, get your Google account in order to register the machine with Google Cloud Print.
4. Select 5. Use the Web service setup, then press the OK button. button to select Cloud settings, then press the OK button. 6. Select Google Cloud Print setup, then press the OK button. 7. Use the button. button to select Register with Google Cloud Print, then press the OK Note If you have already registered the machine with Google Cloud Print, the confirmation message to re-register the machine is displayed. 8.
2. Press the MENU button. The menu screen is displayed. 3. Select Web service, then press the OK button. LCD and Operation Panel 4. Select 5. Use the Web service setup, then press the OK button. button to select Cloud settings, then press the OK button. 6. Select Google Cloud Print setup, then press the OK button. 7. Use the button. button to select Delete from Google Cloud Print, then press the OK 8.
Printing from Computer or Smartphone with Google Cloud Print When you send print data with Google Cloud Print, the machine receives the print data and prints it automatically if the machine is turned on. When printing from a computer, smartphone, or other external device with Google Cloud Print, load paper into the machine in advance. Sending the Print Data with Google Cloud Print 1. Make sure that the machine is turned on.
Depending on the device sending the print data, you may not select the print settings when sending the print data with Google Cloud Print. When you want to print from Google Cloud Print immediately When the machine cannot receive the print data, or you want to start printing immediately, you can check whether there is a print job on the Google Cloud Print and start printing manually. Follow the steps below. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2.
Printing from a Digital Camera Printing Photographs Directly from a PictBridge Compliant Device About PictBridge Print Settings
Printing Photographs Directly from a PictBridge Compliant Device You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone to the machine through LAN, and print recorded images directly without using a computer. Connectable devices: PictBridge compliant device that is connectable with LAN Printable image data format: The machine accepts images* taken with a camera compliant with the Design rule for Camera File system and PNG files. * Exif 2.2/2.21/2.
When printing from the PictBridge compliant device, set the print quality with the operation panel on the machine. You cannot set the print quality on the PictBridge compliant device. When printing onto printable disc, attach the disc tray following the on-screen instructions of PictBridge compliant device. For details on how to place the printable disc on the disc tray: Placing a Printable Disc 5. Start printing from your PictBridge compliant device.
About PictBridge Print Settings Settings on a PictBridge Compliant Device Settings on the Machine Settings on a PictBridge Compliant Device This section describes the PictBridge function of the machine. For the print settings on a PictBridge compliant device, refer to the instructions given in the device's instruction manual. Note In the following description, names of setting items are given according to those used in Canon-brand PictBridge compliant devices.
Settings on the Machine You can change the PictBridge print settings from the PictBridge print settings screen. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine. This section describes the procedure to display the PictBridge print settings screen. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Press the MENU button. The menu screen is displayed. 3. Select Setup, then press the OK button. 4.
Printing from a Bluetooth Compliant Device Printing from Mobile Phone via Bluetooth Communication
Printing from Mobile Phone via Bluetooth Communication This section describes the procedure to print photos through Bluetooth communication from a mobile phone with the optional Bluetooth Unit BU-30. When printing from a mobile phone through Bluetooth communication, refer also to your mobile phone's instruction manual. For the procedure to print through Bluetooth communication from the computer, refer to About Bluetooth Communication.
• For the device name, select the default value "Canon XXX-1" (where "XXX" is your machine's name). • If you are required to input a passkey, input the default value "0000". You can change the device name of the machine, passkey, and so on from the Bluetooth settings screen. Setting Bluetooth Printing Note Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions below.
About Bluetooth Communication Handling Precautions Preparation to Use the Bluetooth Unit Printing Data via Bluetooth Communication Basic Procedure for Printing via Bluetooth Communication Bluetooth Settings Specifications
Handling Precautions Shipping the Bluetooth Unit
Shipping the Bluetooth Unit The Bluetooth unit may not be used in countries or regions other than the country or region where it was purchased due to local laws and regulations. Please note that the use of the Bluetooth unit in such countries or regions may lead to penalties and that Canon should not be liable for such punishment.
Preparation to Use the Bluetooth Unit Bluetooth Unit Attaching to and Removing from the Printer
Bluetooth Unit The Bluetooth Unit BU-30 (hereafter referred to as the Bluetooth unit) is an adaptor which can be used with a Canon IJ printer with Bluetooth interface. By attaching the Bluetooth unit to a Canon IJ printer with Bluetooth interface, wireless printing from a Bluetooth enabled device, such as a computer or mobile phone, is possible. Note Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions below.
Attaching to and Removing from the Printer Attaching the Bluetooth Unit to the Printer Removing the Bluetooth Unit from the Printer Attaching the Bluetooth Unit to the Printer Attach the Bluetooth unit to the USB flash drive port of the printer in accordance with the following procedure. Refer to Front View for the position of the USB flash drive port. 1. Make sure that the printer is turned on. Confirming that the Power Is On 2. Insert the Bluetooth unit to the USB flash drive port of the printer.
Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you remove the Bluetooth unit. Important Store the Bluetooth unit with the cap attached.
Printing Data via Bluetooth Communication Preparation Installing the MP Drivers Checking the Device Name of the Printer Registering the Printer Deleting the Printer
Preparation In order to print via Bluetooth communication with Windows, the following system requirements must be satisfied. • Computer A computer in which an internal Bluetooth module is installed or a computer to which an optional Bluetooth adapter (available from various manufacturers) is attached.
• When using Windows XP SP2 or later, and when Bluetooth Devices is displayed in Printers and Other Hardware under Control Panel Authenticate the printer as a Bluetooth device on Bluetooth Devices in Printers and Other Hardware under Control Panel. See Registering the Printer. • The operations may vary depending on your operating program. In this case, refer to your computer's operation manual.
Installing the MP Drivers Note If you use the printer connecting with a computer, the MP Drivers have already been installed. In this case, move to the next step. Checking the Device Name of the Printer Before connecting the Bluetooth unit to the printer for wireless printing, install the MP Drivers to your computer. If you reinstall the MP Drivers, reinstall the MP Drivers using the Setup CD-ROM.
Checking the Device Name of the Printer This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the printer in preparation for Bluetooth printing. Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphic LCD, and the other with a text LCD. If you need more information about the Bluetooth settings, see Setting Bluetooth Printing. 1. Make sure that the printer is turned on. Confirming that the Power Is On 2.
Graphic LCD Text LCD 5. Check the device name. The device name is necessary to register the printer as a Bluetooth device. Be sure to note the device name. Note If multiple printer units with the same model name are connected to the system, assigning a different device name to each printer is recommended for easy identification of the printer you will use. See Select device name (Graphic LCD)/Device name (Text LCD) Screen.
Registering the Printer Register the printer as a Bluetooth device using Add a Bluetooth Device (Bluetooth Devices except for Windows 7) under Control Panel. Note Before registering the printer on Add a Bluetooth Device (Bluetooth Devices except for Windows 7) under Control Panel, enable the Bluetooth function of your computer. For more information, refer to your computer's operation manual.
4. Select Pair without using a code. When registering this printer, Connecting with this device (Pairing with this wireless device in Windows Vista) is displayed. Note If you set a passkey on the printer, select Enter the device's pairing code and input the passkey, then click Next. For more information about setting a passkey, see Bluetooth settings Screen. 5. Make sure that the printer is added. • In Windows 7, when This device has been successfully added to this computer is displayed, click Close.
In Windows Vista, the Windows needs to install driver software for your Bluetooth Peripheral Device screen may be displayed automatically. In this case, click Don't show this message again for this device. In Windows XP: 1. Log into a user account with the administrator privilege. 2. Click Control Panel, Printers and Other Hardware, then Bluetooth Devices. 3. Click Add on the Devices sheet. Add Bluetooth Device Wizard will start. 4.
Select the same device name as that checked under Checking the Device Name of the Printer. Note If the device name is not displayed, see Check 3: Is the printer name which you want to register displayed in the Printer List?. 6. Select Don't use a passkey, and then Next. Note If you set a passkey on the printer, select Use the passkey found in the documentation and input the passkey then click Next. For more information about a passkey, see Bluetooth settings Screen. 7. Click Finish.
8. Check that the device name selected at step 5 is registered on the Devices sheet, and click OK. Now, the settings for printing via Bluetooth communication are ready.
Deleting the Printer This section describes the procedure to delete the registered printer. If you want to re-register the printer as a Bluetooth device, first follow the procedure below to delete the printer, and then re-register it. For the procedure to re-register the printer, see Registering the Printer. 1. Log into a user account with the administrator privilege. 2. Select items from Control Panel as shown below. • In Windows 7, click Control Panel, then Devices and Printers under Hardware and Sound.
Basic Procedure for Printing via Bluetooth Communication Printing with Computers Printing with Bluetooth Compliant Devices other than a Computer
Printing with Computers When using Bluetooth communication, also refer to the computer's instruction manual. When printing from a Bluetooth compliant device other than a computer, see Printing with Bluetooth Compliant Devices other than a Computer. Note Depending on your application software, operations may differ. For details, refer to your software application's instruction manual. The steps described in this section are for printing in Windows 7. Bluetooth communication distance: Approx. 33 ft.
The printer registered on Add a Bluetooth Device (Bluetooth Devices except for Windows 7) is displayed as "Canon XXX Printer (Copy X)". "X" is a device name or a digit. The number of digits may differ depending on the printer. 6. Specify the required settings. 1. Select the print setting in Commonly Used Settings. 2. Confirm the required print settings in Media Type, Printer Paper Size, and so on. Note You can specify the advanced print settings on Main sheet and Page Setup sheet.
Printing begins. Note When you use a USB cable for printing, select "Canon XXX Printer" from Select Printer. To cancel a print job in progress, use the Stop button on the printer or click Cancel Printing on the printer status monitor. After printing is canceled, a sheet of paper may be ejected with no printing results. To display the printer status monitor, click "Canon XXX Printer (Copy X)" on the taskbar. "X" is a device name or a digit. The number of digits may differ depending on the printer.
Printing with Bluetooth Compliant Devices other than a Computer The LCD of the printer allows you to perform settings for printing using Bluetooth compliant devices other than a computer. When you print with one of these devices, also refer to your device's instruction manual. When printing from a computer, see Printing with Computers. Note Mobile phones, PDAs and digital cameras supporting OPP (Object Push Profile) or BIP (Basic Imaging Profile) can print photos.
Bluetooth Settings Setting Bluetooth Printing Bluetooth settings Screen
Setting Bluetooth Printing 1. Make sure that the printer is turned on. Confirming that the Power Is On 2. Attach the Bluetooth unit. For information about how to attach the Bluetooth unit, see Attaching to and Removing from the Printer. Note When the Bluetooth unit is properly attached to the printer, the message is displayed on the LCD. 3. Display the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen on the LCD.
Bluetooth settings Screen • Graphic LCD • Text LCD 1. Select device name (Graphic LCD)/Device name (Text LCD) Displays the device name of the printer to which the Bluetooth unit is attached. Select device name (Graphic LCD)/Device name (Text LCD) Screen 2. Access refusal setting (Graphic LCD)/Access refusal (Text LCD) Selecting ON (Graphic LCD)/ON (Text LCD) will disable searching of this printer by a Bluetoothcompatible device. Access refusal setting (Graphic LCD)/Access refusal (Text LCD) Screen 3.
In the example used for this explanation, the model name is set to "MX520 series". When a model other than "MX520 series" is used, whatever appears in place of "MX520" becomes the model name use. Ex: When you select MX520 series-2, the printer name displayed on the Bluetooth device is Canon MX520 series-2. The initial value is set to MX520 series-1.
Change passkey (Graphic LCD)/Passkey (Text LCD) Screen When you select Enable (Graphic LCD)/Enable (Text LCD) on the Security settings (Graphic LCD)/ Security settings (Text LCD) screen, you are required to set a passkey to register the printer on other Bluetooth devices. After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey.
Specifications Communication method Bluetooth v2.0 Maximum Speed 1.44 Mbps Output Bluetooth Power Class 2 Communication distance Line-of-sight distance: approx. 33 ft.
Copying Making Copies Basic Displaying the Preview Screen Setting Items Reducing or Enlarging a Copy Two-Sided Copying About Other Copy Functions Copying Two Pages to Fit onto a Single Page Copying Four Pages to Fit onto a Single Page Copying Thick Originals Such as Books Copying without Borders Collated Copying Copying Photos
Making Copies Load the original to copy. This section describes the procedure to copy with Standard copy. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Press the COPY button. The Copy standby screen is displayed. 3. Load paper. Loading Paper 4. Load the original document on the platen glass or in the ADF. Loading Originals 5. Specify the settings as necessary. 1. Number of copies Specify by using the + or - button. 2.
If you load the original in the ADF, do not move the original until copying is complete. Note To cancel copying, press the Stop button. If you load the original on the platen glass, you can add the copying job while printing. Adding the Copying Job (Reserve copy) Adding the Copying Job (Reserve copy) If you load the original on the platen glass, you can add the copying job while printing (Reserve copy). The screen below is displayed when you can add the copying job.
Displaying the Preview Screen When you load the original on the platen glass and select Standard copy or Frame erase copy in Advanced print, pressing a Function button allows you to preview an image of the printout on the preview screen. When Standard copy is selected, press the left Function button on the Copy standby screen. When Frame erase copy is selected, press the right Function button on the print settings screen. Important The preview screen is not available when you load the original in the ADF.
Setting Items You can change the copy settings such as magnification and intensity. Print Settings Screen Note For details on the print setting screen or the setting item for Photo copy, see Copying Photos. How to display the print setting screen varies with the copy menu. • In Standard copy: The following screen is displayed by pressing the right Function button on the Copy standby screen. • In Borderless copy or Frame erase copy: The following screen is displayed before copying.
Note Depending on the copy menu, some setting items cannot be selected. This section describes the setting items in Standard copy. The setting item which cannot be selected is displayed grayed out. For details on the setting items for Photo copy, see Copying Photos. Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, Error details is displayed on the LCD.
3. Page size Select the page size of the loaded paper. 4. Type (Media type) Select the media type of the loaded paper. 5. Print qlty (Print quality) Adjust print quality according to the original. Important If you use Fast with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again. Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white. 6. Layout Select the layout.
Reducing or Enlarging a Copy You can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying. The LCD below is displayed when you press the right Function button in the Copy standby screen. Select the reduction/enlargement method from Magnif.. Note Some of the reduction/enlargement methods are not available depending on the copy menu. • Fit to page The machine automatically reduces or enlarges the image to fit the page size. The setting in Magnif.
If you select other than Fit to page and press the right Function button, Magnification screen is displayed. Use the button to specify the magnification. Note 400% MAX (maximum copy ratio) and 25% MIN (minimum copy ratio) are selectable. If you make a copy at the same size as the original, select Same size.
Two-Sided Copying When you select 2-sided for 2-sidedPrintSetting in Standard copy, you can copy two original pages onto the both sides of a single sheet of paper. In addition, when you select Duplex for ADF duplex scan, you can perform duplex scanning. Specify the place to load originals or copy settings according to the two-sided copying method.
• Two-sided to Single-sided Place to load the original: ADF ADF duplex scan: Duplex 2-sidedPrintSetting: 1-sided Note When you select Duplex for ADF duplex scan, Advanced is displayed on the LCD. You can select the orientation and the stapling side of the original by pressing the right Function button.
• When you select Portrait for the orientation and Short-side stapling for the stapling side: • When you select Landscp. for the orientation and Long-side stapling for the stapling side: • When you select Landscp. for the orientation and Short-side stapling for the stapling side: After selecting the stapling side and press the OK button, you can select whether you use the preview screen. If you select ON, the preview screen is displayed so that you can check the orientation.
2. Rescan If you press the left Function button, the original is rescanned. Press the OK button to start scanning. • After scanning: Placing documents (platen) screen appears on the LCD after scanning each sheet of original. Remove the sheet of original from the platen glass after scanning and load the next sheet on the platen glass, then press the OK button. Note If you do not need more scanning, press the left Function button. The machine starts copying. You can add the copying job while printing.
About Other Copy Functions The following copying functions are selectable. Borderless copy You can copy images so that they fill the entire page without borders. Copying without Borders Frame erase copy When copying thick originals such as books, you can make a copy without black margins around the image and gutter shadows. Copying Thick Originals Such as Books Photo copy You can copy all photos you scanned.
Copying Two Pages to Fit onto a Single Page When you select 2-on-1 copy for Layout in Standard copy, you can copy two original pages onto a single sheet of paper by reducing each image. Press the right Function button on the Copy standby screen to display the print settings screen, then select 2-on-1 copy for Layout. Press the right Function button to specify the orientation and the advanced layout.
When Loading the Original on the platen glass: • Before scanning: When the preview function is activated, the machine starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below (preview screen) is displayed on the LCD. 1. Rotate If you press the right Function button, the original rotates by 180 degrees. 2. Rescan If you press the left Function button, the original is rescanned. Press the OK button to start scanning.
Copying Four Pages to Fit onto a Single Page When you select 4-on-1 copy for Layout in Standard copy, you can copy four original pages onto a single sheet of paper by reducing each image. Four different layouts are available. Press the right Function button on the Copy standby screen to display the print settings screen, then select 4-on-1 copy for Layout. Press the right Function button to specify the orientation and the advanced layout. Note The layout is the same regardless of the orientation.
After selecting the layout and press the OK button, you can select whether you use the preview screen. If you select ON, the preview screen is displayed so that you can check the orientation. Note If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the print quality to Standard, then try copying again. If the problem is not resolved, set the print quality to Fast and try copying again. This function can be used in combination with Two-sided copy.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the platen glass, then press the OK button. Note If you do not need more scanning, press the left Function button. The machine starts copying. You can add the copying job while printing.
Copying Thick Originals Such as Books When copying thick originals such as books, you can make a copy without black margins around the image and gutter shadows. Using this function, you can reduce unnecessary ink consumption. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Load paper. Loading Paper 3. Press the MENU button. The menu screen is displayed. 4. Select Advanced print, then press the OK button. 5. Select Frame erase copy, then press the OK button. 6.
machine cannot distinguish the document color from the shadow and this may cause slight cropping or a shadow on the crease.
Copying without Borders You can copy images so that they fill the entire page without borders. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Load the photo paper. Loading Paper 3. Press the MENU button. The menu screen is displayed. 4. Select Photo, then press the OK button. 5. Select Borderless copy, then press the OK button. 6. Load the original on the platen glass. Loading Originals Note When you use this function, load the original on the platen glass. 7.
Collated Copying When you select ON for Collate in Standard copy, you can obtain sorted printouts when making multiple copies of a multi-paged original. In addition, you can copy originals on both sides of paper. • When ON is selected: • When OFF is selected: Note When you use this function, load the original in the ADF. This function can be used in combination with Two-sided copy.
Copying Photos You can scan printed photos and print them all at one time. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Load the photo paper. Loading Paper 3. Press the MENU button. The menu screen is displayed. 4. Select Photo, then press the OK button. 5. Select Photo copy, then press the OK button. 6. Confirm the on-screen instructions, then press the OK button. 7.
2. Type (Media type) Select the media type of the loaded paper. 3. Print qlty (Print quality) Select print quality according to the original. 4. Border (Bordered/Borderless print) Select bordered or borderless print. 5. Photo fix Select No correction, Auto photo fix, or Fade restoration. Note When No correction is selected, the machine prints the scanned image without correction. When Auto photo fix is selected, the machine corrects the scanned image automatically.
