User Guide

1
2
41
Printing from Your Mobile Phone
You can print pictures taken with infrared (IrSimple or IrDA IR) or Bluetooth compatible mobile phones
without using a cable.
Transfer images from your mobile phone
to SELPHY.
Printing starts after data transmission is
completed.

Make sure that there is no memory
card inserted and that no computer is
connected to SELPHY.
Infrared (IrSimple or IrDA IR) Wireless Printing
You can print pictures taken on Infrared (IrSimple or IrDA IR) compatible mobile phones without using
a cable. For details on how to use your mobile phone or on printing methods via Infrared, refer to the
user guide provided with your mobile phone.
You cannot establish a wireless connection between a computer and SELPHY.
The maximum le size that can be transmitted is 2 – 3 MB (varies depending on mobile phone).
Data transmission time increases when data size is large. Therefore, the amount of time before
printing will also increase.
Movies, e-mail, address book information, or images attached to an e-mail or downloaded from
the Internet cannot be printed.
Depending on the mobile phone model you use, images saved on the memory card may not be
printed.
SELPHY automatically sets the print orientation.
Depending on the paper size you use, the edges of the image may be cropped.







Be sure the phone
is no more than
20cm (8 in.) away
from the infrared
sensor.
(Be sure nothing is
blocking the signal)
Available range
10° in all directions
If transmission cannot be completed, move the phone closer to and directly in front of the infrared
sensor.
COPY