Getting Started Démarrage Inbetriebnahme Aan de Slag-gids Guida Rapida Para Começar Guía de inicio Ξεκινώντας Uppstartsguide Komme i gang Før du begynder Aloitusopas Read Safety and Important Information (addendum) first. Lire Sécurité et informations importantes (addendum) en premier. Lesen Sie Sicherheitsinformationen und wichtige Hinweise (Anhang) zuerst. Lees eerst Veiligheidsinformatie en belangrijke informatie (addendum).
1 2 How to Hold Printer Manipulation de l'imprimante Halten des Druckers De printer vasthouden Come sospendere la stampante Como segurar a impressora Cómo sujetar la impresora Πώς να κρατάτε τον εκτυπωτή Hur du håller skrivaren Hvordan holde skriveren Sådan holder du printeren Tulostimen pitäminen Installing the Printer.................................................................................. page 1 Installation de l'imprimante.......................................................................
□ Power cord □ Ink tanks for setup 5 Lift the operation panel and press the ON button. 6 Drag the screen and tap the language to select. 7 If the following screen appears, tap your country or region to select. 8 Read the messages and follow the on-screen instructions. ENGLISH 1. Checking Included Items □M odular cable □ Setup CD-ROM for Windows PC □S afety and Important Information □ Getting Started (this manual) 2.
3. Installing Ink Tank 1 If the color is not displayed on the screen even though you have installed the ink tank, the color of the ink tank may be wrong or you may have installed an ink tank, such as one with a different model number, that is not supported by this printer. Either install an ink tank for the correct color or use the provided ink tank for setup. Open the scanning unit / cover. o not touch the print head holder (A) until it D stops.
Open the paper guides, and then align the guide in front with the mark of A4. 7 If the following screen appears, select OK. 4 a L oad plain A4 size paper with the print side facing down. b Slide the right paper guide to align it with the side of the paper stack. 8 Make sure that a pattern is printed for Print Head Alignment. ENGLISH 3 It takes about 2 minutes to finish printing. c A lign the paper stack with the paper guide in front.
5. Preparing for Connection Use Only Printer a Press the Stop button on the printer. In the following description, smartphones and tablet devices are collectively described as smartphone. 1 Select Next. b Select Do not connect > Yes in this order. 2 Make sure that the following screen appears. The setup is now complete. To continue fax setup, proceed to page 8. From here on, proceed to a step according to how you use the printer.
Using Setup CD-ROM (Windows Only) ENGLISH a Load the Setup CD-ROM in your computer. ■■ When using Windows 10 or Windows 8.1: b When the following message appears on the right side of your computer screen, click it. c If the following screen appears, click Run Msetup4.exe. When This Message Does Not Appear (or Has Disappeared) 1. Click File Explorer on the taskbar. or 2. Click This PC on the left side of the opened window. 3. Double-click the CD-ROM icon on the right side of the window.
iOS 6-B. Connecting to Smartphone Android You need a connection setup for each smartphone. Proceed with the setup from step 1 for each smartphone. Preparation • Turn on Wi-Fi on your smartphone. • If you have a wireless router, connect your smartphone to the wireless router you want to connect to the printer. * For operations, refer to manuals of your smartphone and the wireless router or contact those manufacturers. 1 Install the application software Canon PRINT Inkjet/SELPHY in your smartphone.
a Tap Settings on your smartphone's home screen, and tap Canon_ij_XXXX in the Wi-Fi settings. a Tap the installed application software. ENGLISH Procedures below vary depending on iOS or Android. Select your operating system and proceed to its procedure. b Follow the on-screen instructions to register the printer. If Canon_ij_XXXX does not appear on the list, see "Preparation for Printer" below to operate the printer, and then repeat step a. b Tap the installed application software.
Loading Photo Paper Load photo paper in the rear tray. 1 Open the rear tray cover and pull out the paper support. 3 a Load several sheets of photo paper with the print side facing up. b Slide the right paper guide to align it with the side of the paper stack. a b 2 4 Close the feed slot cover. 5 a Pull out the paper output tray. b Open the output tray extension. Read the message on the printer's screen and register the information of the loaded paper. a O pen the feed slot cover.
1. Vérification des éléments fournis □ Cordon d'alimentation □C artouches d'encre pour la configuration □ CD-ROM d'installation pour PC Windows 5 Levez le panneau de contrôle et appuyez sur le bouton MARCHE (ON). 6 Faites glisser l'écran et touchez la langue à sélectionner. 7 Si l'écran suivant s'affiche, appuyez sur le pays ou la région de votre choix. 8 Lisez les messages et suivez les instructions à l'écran.
3. Installation d'une cartouche d'encre 1 Si la couleur ne s'affiche pas à l'écran alors que vous avez installé la cartouche d'encre, la couleur de la cartouche d'encre est peut-être fausse, ou vous avez peut-être installé une cartouche d'encre non prise en charge par l'imprimante, par exemple une cartouche avec un numéro de modèle différent. Installez une cartouche d'encre de la bonne couleur ou utilisez la cartouche d'encre fournie pour la configuration. Ouvrez l'unité de numérisation / capot.
3 Ouvrez les guides papier, puis alignez le guide à l'avant avec la marque A4. 7 Si l'écran suivant s'affiche, sélectionnez OK. 4 a C hargez du papier ordinaire au format A4 avec la face à imprimer vers le bas. b Faites glisser le guide papier droit de manière à l'aligner avec le côté de la pile de papier. 8 Assurez-vous qu'un motif est imprimé pour Alignement tête d'impression. L'impression nécessite environ 2 minutes. FRANÇAIS c A lignez la pile de papier avec le guide papier avant.
5. Préparation de la connexion Dans la description suivante, les smartphones et les tablettes sont regroupés sous le terme smartphone. 1 Utiliser uniquement l'imprimante a Appuyez sur le bouton Arrêt (Stop) de l'imprimante. Sélectionnez Suivant. b Sélectionnez Ne pas connecter > Oui dans cet ordre. 2 Assurez-vous que l'écran suivant s'affiche. La configuration est terminée. Pour poursuivre la configuration de la télécopie, passez à la page 8.
Utilisation du CD-ROM d'installation (Windows uniquement) a Chargez le CD-ROM d'installation dans votre ordinateur. ■■ Si vous utilisez Windows 10 ou Windows 8.1 : b Lorsque le message suivant apparaît sur la droite de l'écran de l'ordinateur, cliquez dessus. d Si la boîte de dialogue Contrôle de compte d'utilisateur apparaît, cliquez sur Oui. ou FRANÇAIS c Si l'écran suivant s'affiche, cliquez sur Exécuter Msetup4.exe. Lorsque ce message n'apparaît pas (ou n'est plus affiché) 1.
iOS 6-B. Connexion à un smartphone Android Vous devez configurer une connexion pour chaque smartphone. Poursuivez la configuration à partir de l'étape 1 pour chaque smartphone. Préparation • Activez Wi-Fi sur votre smartphone. • Si vous avez un routeur sans fil, connectez votre smartphone au routeur sans fil que vous voulez connecter à l'imprimante. * Pour le fonctionnement, reportez-vous aux manuels de votre smartphone et du routeur sans fil ou prenez contact avec les fabricants.
Les procédures ci-dessous varient selon que vous utilisez iOS ou Android. Sélectionnez votre système d'exploitation et poursuivez avec la procédure s'y rapportant. a Touchez Réglages sur l'écran d'accueil du smartphone, puis touchez Canon_ij_XXXX dans les réglages Wi-Fi. a Touchez le logiciel d'application installé. Si Canon_ij_XXXX n'apparaît pas dans la liste, reportez-vous à la section « Préparation de l'imprimante » ci-dessous pour faire fonctionner l'imprimante, puis répétez l'étape a.
Chargement de papier photo Chargez du papier photo dans le réceptacle arrière. 1 Ouvrez le couvercle du réceptacle arrière et retirez le support papier. 3 a Chargez plusieurs feuilles de papier photo face à imprimer vers le haut. b Faites glisser le guide papier droit de manière à l'aligner avec le côté de la pile de papier. a b 2 4 Fermez le couvercle de la fente d'alimentation. 5 a Retirez le bac de sortie papier. b Ouvrez l'extension du bac de sortie papier.
1. Überprüfen des Lieferumfangs □ Netzkabel 5 Heben Sie das Bedienfeld an und drücken Sie auf die Taste EIN (ON). 6 Ziehen Sie den Bildschirm und tippen Sie auf die gewünschte Sprache. 7 Wenn der folgende Bildschirm angezeigt wird, wählen Sie Ihr Land oder Ihre Region, indem Sie darauf tippen. 8 Lesen Sie die Meldungen und befolgen Sie die Anweisungen auf dem Bildschirm.
3. Einsetzen des Tintenbehälters 1 Wenn die Farbe nicht auf dem Bildschirm angezeigt wird, obwohl Sie den Tintenbehälter eingesetzt haben, ist die Farbe des Tintenbehälters möglicherweise falsch oder Sie haben beispielsweise einen Tintenbehälter mit einer anderen Modellnummer eingesetzt, der von diesem Drucker nicht unterstützt wird. Setzen Sie entweder einen Tintenbehälter der richtigen Farbe ein oder verwenden Sie den im Lieferumfang enthaltenen Tintenbehälter für die Einrichtung.
3 Öffnen Sie die Papierführungen und richten Sie die vordere Führung an der Markierung für A4 aus. 4 a L egen Sie mehrere Blätter Normalpapier des Formats A4 mit der bedruckbaren Seite nach unten ein. b Verschieben Sie die rechte Papierführung, um sie an der Seite des Papierstapels auszurichten. 7 Wenn der folgende Bildschirm angezeigt wird, wählen Sie OK. 8 Stellen Sie sicher, dass ein Muster für die Druckkopfausrichtung (Print Head Alignment) gedruckt wird.
5. Vorbereiten der Verbindung Nur Drucker verwenden In der folgenden Beschreibung werden Smartphones und Tablet-Geräte gesamthaft als Smartphones bezeichnet. 1 a Drücken Sie die Taste Stopp (Stop) am Drucker. Wählen Sie Weiter (Next). b Wählen Sie Nicht verbinden (Do not connect) > Ja (Yes) in dieser Reihenfolge. 2 Stellen Sie sicher, dass der folgende Bildschirm angezeigt wird. Die Einrichtung ist jetzt abgeschlossen. Lesen Sie auf Seite 8 weiter, um mit der Einrichtung des Fax fortzufahren.
Verwenden der Installations-CD-ROM (nur Windows) a Legen Sie die Installations-CD-ROM in Ihren Computer ein. ■■ Bei Verwendung von Windows 10 oder Windows 8.1: c Wenn der folgende Bildschirm angezeigt wird, klicken Sie auf Msetup4.exe ausführen (Run Msetup4.exe). Wenn diese Meldung nicht (oder nicht mehr) angezeigt wird 1. Klicken Sie auf der Taskleiste auf Datei-Explorer (File Explorer). oder 2. Klicken Sie links im geöffneten Fenster auf Dieser PC (This PC). 3.
iOS 6-B. H erstellen einer Verbindung mit einem Smartphone Android Für jedes Smartphone muss eine Verbindung eingerichtet werden. Fahren Sie mit der Einrichtung für jedes Smartphone ab Schritt 1 fort. Vorbereitung • Aktivieren Sie auf Ihrem Smartphone Wi-Fi. • Wenn Sie einen Wireless Router besitzen, stellen Sie eine Verbindung zwischen Ihrem Smartphone und dem Wireless Router her, den Sie mit dem Drucker verbinden möchten.
Die unten aufgeführten Verfahren unterscheiden sich auf iOS und Android. Wählen Sie Ihr Betriebssystem aus und fahren Sie bei den entsprechenden Verfahren fort. a Tippen Sie auf dem Startbildschirm Ihres Smartphones auf Einstellungen (Settings) und anschließend in den Wi-Fi-Einstellungen auf Canon_ij_XXXX. a Tippen Sie auf die installierte Anwendungssoftware. b Befolgen Sie die Anweisungen auf dem Bildschirm, um den Drucker zu registrieren. b Tippen Sie auf die installierte Anwendungssoftware.
Einlegen von Fotopapier Legen Sie Fotopapier in das hintere Fach ein. 1 Öffnen Sie die Abdeckung des hinteren Fachs und ziehen Sie die Papierstütze heraus. 3 a Legen Sie mehrere Blätter Fotopapier mit der bedruckbaren Seite nach oben ein. b Verschieben Sie die rechte Papierführung, um sie an der Seite des Papierstapels auszurichten. a b 2 4 Schließen Sie die Abdeckung für den Einzugsschacht. 5 a Ziehen Sie das Papierausgabefach heraus. b Öffnen Sie die Verlängerung des Ausgabefachs.
1. Meegeleverde artikelen controleren □ Netsnoer 5 Til het bedieningspaneel op en druk op de knop AAN (ON). 6 Sleep over het scherm en tik op de gewenste taal. □ Inkttanks voor installatie □M odulaire kabel □ Installatie-cd-rom voor Windows-pc □V eiligheidsinformatie en belangrijke informatie □A an de Slag-gids (deze handleiding) NEDERLANDS 1 Verwijder het verpakkingsmateriaal (zoals oranje tape en beschermende folie op het aanraakscherm) van de buitenkant van de printer.
3. Inkttank plaatsen 1 Als de kleur niet op het scherm wordt weergegeven, ook al hebt u de inkttank geplaatst, is de kleur van de inkttank mogelijk onjuist of hebt u mogelijk een inkttank met een ander modelnummer geïnstalleerd die niet wordt ondersteund door deze printer. Plaats een inkttank voor de juiste kleur of gebruik de bijgeleverde inkttank voor de installatie. Open de scaneenheid / klep. aak de printkophouder (A) niet aan, totdat R deze stopt.
3 Open de papiergeleiders en lijn de voorste geleider uit met de markering voor A4. 4 a P laats normaal papier van A4-formaat met de afdrukzijde omlaag. b Verschuif de rechter papiergeleider om deze uit te lijnen met de zijkant van de papierstapel. 7 Selecteer OK als het volgende scherm wordt weergegeven. 8 Zorg ervoor dat een patroon wordt afgedrukt voor Uitlijning printkop (Print Head Alignment). Het afdrukken duurt ongeveer 2 minuten.
5. Voorbereiden op de verbinding In de volgende omschrijving worden smartphones en tablets gezamenlijk aangeduid met de term smartphone. 1 Alleen printer gebruiken a Druk op de knop Stoppen (Stop) op de printer. Selecteer Volgende (Next). b Selecteer Niet verbinden (Do not connect) > Ja (Yes) in deze volgorde. 2 Controleer of het volgende scherm wordt weergegeven. De installatie is nu voltooid. Ga naar pagina 8 om verder te gaan met de faxconfiguratie.
De installatie-cd-rom (alleen Windows) gebruiken a Plaats de installatie-cd-rom in de computer. ■■ Wanneer u Windows 10 of Windows 8.1 gebruikt: b Wanneer het volgende bericht aan de rechterkant van uw computerscherm wordt weergegeven, klikt u erop. Wanneer dit bericht niet wordt weergegeven (of wanneer het is verdwenen) 1. Klik op Verkenner (File Explorer) op de taakbalk. NEDERLANDS d Als het dialoogvenster Gebruikersaccount beheren (User Account Control) wordt geopend, klikt u op Ja (Yes). of 2.
iOS 6-B. Verbinden met een smartphone Android U moet een verbinding instellen voor elke smartphone. Ga verder met de installatie vanaf stap 1 voor elke smartphone. Voorbereiding • Schakel Wi-Fi in op uw smartphone. • Als u een draadloze router hebt, sluit u uw smartphone aan op de draadloze router die u met de printer wilt verbinden. * Raadpleeg voor de stappen de handleiding van uw smartphone en de draadloze router of neem contact op met de desbetreffende fabrikant.
De onderstaande procedures zijn van toepassing op iOS of Android. Selecteer uw besturingssysteem en ga verder naar de desbetreffende procedure. a Tik op Instellingen (Settings) op het beginscherm van uw smartphone en tik op Canon_ij_XXXX bij de instellingen voor Wi-Fi. a Tik op de geïnstalleerde toepassing. b Volg de instructies op het scherm om de printer te registreren. NEDERLANDS b Tik op de geïnstalleerde toepassing. c Volg de instructies op het scherm om de printer te registreren.
Fotopapier plaatsen Plaats fotopapier in de achterste lade. 1 Open de klep van de achterste lade en trek de papiersteun uit. 3 a Plaats een aantal vellen fotopapier met de afdrukzijde omhoog. b Verschuif de rechter papiergeleider om deze uit te lijnen met de zijkant van de papierstapel. a b 2 4 Sluit het klepje over de invoersleuf. 5 a Trek de papieruitvoerlade uit. b Open het verlengstuk van de uitvoerlade.
1. Verifica degli elementi inclusi 5 Sollevare il pannello dei comandi e premere il pulsante ON. 6 Scorrere lo schermo e toccare la lingua per selezionarla. 7 Se viene visualizzata la seguente schermata, toccare il Paese o la regione da selezionare. 8 Leggere i messaggi e seguire le istruzioni a video.
3. Installazione del serbatoio d'inchiostro 1 Se il colore non viene visualizzato sullo schermo anche se il serbatoio d'inchiostro è stato installato, il colore del serbatoio d'inchiostro potrebbe non essere corretto oppure potrebbe essere stato installato un serbatoio d'inchiostro che non è supportato da questa stampante, come un serbatoio con un numero di modello diverso. Installare un serbatoio d'inchiostro per il colore corretto o utilizzare il serbatoio d'inchiostro fornito per l'impostazione.
3 Aprire le guide della carta, quindi allineare la guida anteriore con il segno A4. 4 a C aricare carta normale in formato A4 con il lato di stampa rivolto verso il basso. b Far scorrere la guida della carta di destra per allinearla con il lato della pila di carta. 7 Se viene visualizzata questa schermata, selezionare OK. 8 Assicurarsi che venga stampato un motivo per Allineamento testina di stampa (Print Head Alignment). Sono necessari circa 2 minuti per portare a termine la stampa.
5. Preparazione per la connessione Utilizzare esclusivamente la stampante a Premere il pulsante Stop sulla stampante. Nella seguente descrizione, i dispositivi smartphone e tablet sono indicati collettivamente come smartphone. 1 Selezionare Avanti (Next). b Selezionare Non connettere (Do not connect) > Sì (Yes) in questo ordine. 2 Accertarsi che venga visualizzata la schermata seguente. L'impostazione è ora completata. Per continuare la configurazione del fax, passare alla pagina 8.
Utilizzo del CD-ROM di installazione (solo Windows) a Caricare il CD-ROM di installazione nel computer. ■■ Quando si utilizza Windows 10 o Windows 8.1: b Quando il seguente messaggio viene visualizzato nella parte destra dello schermo del computer, fare clic sul messaggio. Quando non viene visualizzato questo messaggio (o il messaggio è scomparso) 1. Fare clic su File Explorer sulla barra delle applicazioni. o c Se viene visualizzata questa schermata, fare clic su Esegui Msetup4.exe (Run Msetup4.exe).
iOS 6-B. Connessione a smartphone Android È necessario impostare una connessione per ogni smartphone. Procedere con l'impostazione dal passo 1 per ciascuno smartphone. Preparazione • Attivare il Wi-Fi sullo smartphone. • Se si dispone di un router wireless, connettere lo smartphone al router wireless da collegare alla stampante. * Per informazioni sul funzionamento, fare riferimento ai manuali dello smartphone e del router wireless o contattare i rispettivi produttori.
Le procedure riportate di seguito variano a seconda se il sistema operativo è iOS o Android. Selezionare il sistema operativo in uso e continuare con la procedura appropriata. a Toccare Impostazioni (Settings) nella schermata iniziale dello smartphone, quindi toccare Canon_ij_ XXXX nelle impostazioni Wi-Fi. a Toccare il software dell'applicazione installata. b Seguire le istruzioni a video per registrare la stampante.
Caricamento di carta fotografica Caricare la carta fotografica nel vassoio posteriore. 1 Aprire il coperchio del vassoio posteriore ed estrarre il supporto per la carta. 3 a Caricare diversi fogli di carta fotografica con il lato di stampa rivolto verso l'alto. b Far scorrere la guida della carta di destra per allinearla con il lato della pila di carta. a b 2 4 Chiudere il coperchio dell'alimentatore manuale. 5 a Estrarre il vassoio di uscita della carta.
1. Verificando os itens incluídos □ Cabo de alimentação □ Cartuchos de tinta para configuração □ CD-ROM de instalação para PC com Windows 5 Levante o painel de controle e aperte o botão ATIVADO (ON). 6 Arraste a tela e toque em um idioma para selecioná-lo. 7 Se a tela a seguir for exibida, toque em seu país ou região para selecionar. 8 Leia as mensagens e siga as instruções na tela. □C abo modular □ I nformações Importantes e Sobre Segurança □ Para Começar (este manual) 2.
3. Instalando o cartucho de tinta 1 Se a cor não for exibida na tela mesmo que você tenha instalado o cartucho de tinta, a cor do cartucho de tinta pode estar errada ou você pode ter instalado um cartucho de tinta que não é suportado por esta impressora, como com um número do modelo diferente. Instale um cartucho de tinta para a cor correta ou use o cartucho de tinta fornecido para configuração. Abra a unidade de digitalização/tampa. ão toque no suporte da cabeça de impressão N (A) antes de ele parar.
3 Abra as guias do papel e posicione-as na marcação A4. 7 Se a tela a seguir for exibida, selecione OK. 4 a C oloque papel tamanho A4 simples com o lado a ser impresso voltado para baixo. b Deslize a guia do papel direita para alinhá-la à pilha de papel. 8 Verifique se um padrão é impresso para Alinhamento da cabeça de impressão (Print Head Alignment). O término da impressão leva cerca de 2 minutos. c A linhe a pilha de papel com a guia do papel frontal.
5. Preparando para a conexão Usar somente a impressora Na descrição abaixo, smartphone se refere coletivamente a smartphones e tablets. 1 a Pressione o botão Parar (Stop) na impressora. Selecione Avançar (Next). b Selecione Não conectar (Do not connect) > Sim (Yes) nesta ordem. 2 Certifique-se de que a tela a seguir seja exibida. A configuração foi concluída. Daqui em diante, prossiga para uma etapa que esteja de acordo com a forma como você usa a impressora.
Usando o CD-ROM de instalação (somente Windows) a Insira o CD-ROM de instalação no computador. ■■ Ao usar Windows 10 ou Windows 8.1: b Clique na mensagem a seguir quando ela for exibida no lado direito da tela do computador. Quando esta mensagem não aparecer (ou tiver desaparecido) 1. Clique em Explorador de Arquivos (File Explorer) na barra de ferramentas. c Se a tela a seguir for exibida, clique em Executar Msetup4.exe (Run Msetup4.exe).
iOS 6-B. Conectando a um smartphone Android Você precisará configurar uma conexão para cada smartphone. Comece a configuração de cada smartphone pela etapa 1. Preparação • Ative o Wi-Fi em seu smartphone. • Se você tiver um roteador sem fio, conecte seu smartphone ao roteador sem fio que você deseja conectar à impressora. * Para obter informações sobre operações, consulte os manuais do seu smartphone e do seu roteador sem fio ou entre em contato com seus respectivos fabricantes.
Os procedimentos descritos abaixo podem variar para iOS e Android. Selecione seu sistema operacional e continue com o procedimento. a Toque em Configurações (Settings) na tela inicial do seu smartphone e depois em Canon_ij_XXXX nas configurações de Wi-Fi. a Toque no software aplicativo instalado. b Siga as instruções na tela para registrar a impressora. Se Canon_ij_XXXX não estiver na lista, consulte a seção “Preparação para a impressora” abaixo para operar a impressora e repita a etapa a.
Colocando papel fotográfico Coloque o papel fotográfico na bandeja traseira. 1 Abra a tampa da bandeja traseira e puxe o suporte de papel para fora. 3 a C oloque várias folhas de papel fotográfico com o lado a ser impresso voltado para cima. b Deslize a guia do papel direita para alinhá-la à pilha de papel. a b 2 4 Feche a tampa do slot de alimentação. 5 a Puxe para fora a bandeja de saída do papel. b Abra a extensão da bandeja de saída.
□ Cable de alimentación □ Depósitos de tinta para configuración □ CD-ROM de instalación para Windows PC □C able modular □ I nformación de seguridad e información importante □ Guía de inicio (este manual) 5 Levante el panel de control y pulse el botón ACTIVADO (ON). 6 Arrastre la pantalla y puntee el idioma para seleccionar. 7 Si aparece la siguiente pantalla, toque su país o región para seleccionarlo. 8 Lea los mensajes y siga las instrucciones que aparezcan en pantalla. ESPAÑOL 1.
3. Instalación del depósito de tinta 1 Si no se muestra el color en pantalla a pesar de haber instalado el depósito de tinta, es posible que el color del depósito de tinta no sea correcto o que haya instalado un depósito de tinta por ejemplo, con un número de modelo distinto que no sea compatible con esta impresora. Instale un depósito de tinta para el color correcto o utilice el depósito de tinta proporcionado para la configuración. Abra la cubierta/unidad de escaneado.
Abra las guías del papel y después alinee la guía de la parte delantera con la marca de A4. 7 Si aparece la siguiente pantalla, seleccione OK. 4 a C argue papel normal de tamaño A4 con el lado de impresión hacia abajo. b Deslice la guía del papel derecha para alinearla con el lado de la pila de papel. 8 Asegúrese de que se imprima un patrón para Alineación de los cabezales de impresión (Print Head Alignment). ESPAÑOL 3 La impresión tarda alrededor de 2 minutos en completarse.
5. Preparación para la conexión Usar solo la impresora En la siguiente descripción, los teléfonos inteligentes y las tabletas se describen en conjunto como teléfonos inteligentes. 1 a Pulse el botón Parar (Stop) de la impresora. Seleccione Siguiente (Next). b Seleccione No conectar (Do not connect) > Sí (Yes) en este orden. 2 Asegúrese de que aparezca la siguiente pantalla. Ha finalizado la configuración. Para continuar con la configuración del fax, vaya a la página 8.
Uso del CD-ROM de instalación (solo para Windows) ESPAÑOL a Cargue el CD-ROM de instalación en su ordenador. ■■ Si utiliza Windows 10 o Windows 8.1: b Cuando se muestre el mensaje siguiente en el lado derecho de la pantalla del ordenador, haga clic en él. c Si aparece la siguiente pantalla, haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe). d Si se muestra el cuadro de diálogo Control de cuentas de usuario (User Account Control), haga clic en Sí (Yes).
iOS 6-B. Conexión con un teléfono inteligente Android Necesitará configurar una conexión para cada teléfono inteligente. Complete la configuración desde el paso 1 para cada teléfono inteligente. Preparativos • Active la Wi-Fi en su teléfono inteligente. • Si dispone de un router inalámbrico, conecte su teléfono inteligente al router inalámbrico para conectar con la impresora.
a Toque Ajustes (Settings) en la pantalla de inicio de su teléfono inteligente y después toque Canon_ij_XXXX en los ajustes de Wi-Fi. a Puntee el software de la aplicación instalado. ESPAÑOL Los procedimientos a continuación varían en función de iOS o Android. Seleccione su sistema operativo y continúe con el procedimiento correspondiente. b Siga las instrucciones en pantalla para registrar la impresora.
Carga de papel fotográfico Cargue el papel fotográfico en la bandeja posterior. 1 Abra la cubierta de la bandeja posterior y retire el soporte del papel. 3 a Cargue varias hojas de papel fotográfico con el lado de impresión hacia arriba. b Deslice la guía del papel derecha para alinearla con el lado de la pila de papel. a b 2 4 Cierre la cubierta de la ranura de alimentación. 5 a Extraiga la bandeja de salida del papel. b Abra la extensión de la bandeja de salida.
1. Έλεγχος των στοιχείων που περιλαμβάνονται □ Καλώδιο τροφοδοσίας □ Δοχεία μελάνης για εγκατάσταση □ CD-ROM εγκατάστασης για Windows PC □ Δομοστοιχειωτό καλώδιο 5 Ανασηκώστε τον πίνακα λειτουργίας και πατήστε το κουμπί ON. 6 Σύρετε την οθόνη και πατήστε τη γλώσσα για να την επιλέξετε. 7 Αν εμφανιστεί η ακόλουθη οθόνη, πατήστε τη γλώσσα ή την περιοχή σας για να την επιλέξετε. 8 Διαβάστε τα μηνύματα και ακολουθήστε τις οδηγίες στην οθόνη.
3. Εγκατάσταση δοχείου μελάνης 1 Εάν το χρώμα δεν εμφανίζεται στην οθόνη παρόλο που έχετε εγκαταστήσει το δοχείο μελάνης, το χρώμα του δοχείου μελάνης μπορεί να μην είναι σωστό ή μπορεί να έχετε εγκαταστήσει ένα δοχείο μελάνης με διαφορετικό αριθμό μοντέλου, που δεν υποστηρίζεται από αυτό τον εκτυπωτή. Εγκαταστήστε ένα δοχείο μελάνης για το σωστό χρώμα ή χρησιμοποιήστε το δοχείο μελάνης που παρέχεται για την εγκατάσταση. Ανοίξτε τη μονάδα σάρωσης / κάλυμμα.
Ανοίξτε τους οδηγούς χαρτιού και, στη συνέχεια, ευθυγραμμίστε τον οδηγό μπροστά με το σημάδι A4. 7 Αν εμφανιστεί η ακόλουθη οθόνη, επιλέξτε OK. 4 a Τ οποθετήστε απλό χαρτί μεγέθους A4 με την πλευρά εκτύπωσης στραμμένη προς τα κάτω. b Σύρετε τον δεξιό οδηγό χαρτιού για να τον ευθυγραμμίσετε με την πλαϊνή πλευρά της στοίβας των χαρτιών. 8 Βεβαιωθείτε ότι εκτυπώνεται ένα μοτίβο για την Ευθυγράμμιση κεφαλής εκτύπωσης (Print Head Alignment). Για να ολοκληρωθεί η εκτύπωση, χρειάζονται περίπου 2 λεπτά.
5. Προετοιμασία για σύνδεση Χρήση μόνο του εκτυπωτή a Πατήστε το κουμπί Στοπ (Stop) στον εκτυπωτή. Στην ακόλουθη περιγραφή, τα smartphones και οι συσκευές tablet περιγράφονται συλλογικά ως smartphone. 1 Επιλέξτε Επόμενο (Next). b Επιλέξτε Μην γίνει σύνδεση (Do not connect) > Ναι (Yes) με τη συγκεκριμένη σειρά. 2 Βεβαιωθείτε ότι εμφανίζεται η παρακάτω οθόνη. Η ρύθμιση έχει ολοκληρωθεί. Για να συνεχίσετε την εγκατάσταση φαξ, ανατρέξτε στη σελίδα 8.
Χρήση CD-ROM εγκατάστασης (μόνο για Windows) a Τοποθετήστε το CD-ROM εγκατάστασης στον υπολογιστή σας. ■■ Κατά τη χρήση Windows 10 ή Windows 8.1: c Αν εμφανιστεί η ακόλουθη οθόνη, κάντε κλικ στην επιλογή Εκτέλεση Msetup4.exe (Run Msetup4.exe). d Αν εμφανιστεί το παράθυρο διαλόγου Έλεγχος λογαριασμού χρήστη (User Account Control), κάντε κλικ στην επιλογή Ναι (Yes). Όταν αυτό το μήνυμα δεν εμφανίζεται (ή έχει εξαφανιστεί) 1. Κάντε κλικ στην επιλογή Εξερεύνηση αρχείων (File Explorer), στη γραμμή εργασιών.
iOS 6-B. Σύνδεση σε smartphone Android Απαιτείται ρύθμιση της σύνδεσης για κάθε smartphone. Προχωρήστε στη ρύθμιση από το βήμα 1 για κάθε smartphone. Προετοιμασία • Ενεργοποιήστε το Wi-Fi στο smartphone σας. • Αν έχετε ασύρματο δρομολογητή, συνδέστε το smartphone στον ασύρματο δρομολογητή που θέλετε να συνδέσετε στον εκτυπωτή. * Για τις διαδικασίες, ανατρέξτε στα εγχειρίδια του smartphone και του ασύρματου δρομολογητή ή επικοινωνήστε με τους κατασκευαστές τους.
Οι παρακάτω διαδικασίες ποικίλουν ανάλογα με το iOS ή το Android. Επιλέξτε το λειτουργικό σας σύστημα και προχωρήστε στην αντίστοιχη διαδικασία. a Πατήστε Ρυθμίσεις (Settings) στην αρχική οθόνη του smartphone και μετά πατήστε Canon_ij_XXXX στις ρυθμίσεις Wi-Fi. a Πατήστε το εγκατεστημένο λογισμικό εφαρμογής σας. Αν το Canon_ij_XXXX δεν εμφανιστεί στη λίστα, ανατρέξτε στην ενότητα "Προετοιμασία για τον εκτυπωτή" παρακάτω για να λειτουργήσει ο εκτυπωτής και, στη συνέχεια, επαναλάβετε το βήμα a.
Τοποθέτηση φωτογραφικού χαρτιού Τοποθετήστε φωτογραφικό χαρτί στην πίσω θήκη. 1 Ανοίξτε το κάλυμμα πίσω θήκης και τραβήξτε έξω την υποστήριξη χαρτιού. 3 a Τοποθετήστε πολλά φύλλα φωτογραφικού χαρτιού με την πλευρά εκτύπωσης στραμμένη προς τα πάνω. b Σύρετε τον δεξιό οδηγό χαρτιού για να τον ευθυγραμμίσετε με την πλαϊνή πλευρά της στοίβας των χαρτιών. a b 2 a Α νοίξτε το κάλυμμα υποδοχής τροφοδοσίας. b Σύρετε τοv δεξιό οδηγό χαρτιού έως το τέρμα. 4 Κλείστε το κάλυμμα υποδοχής τροφοδοσίας.
1. Kontrollera medföljande delar □ Strömkabel □ Bläckbehållare för installation □ Installations-CD för Windows PC □M odularkabel □ I nformation om säkerhet och annan viktig information □ Uppstartsguide (denna handbok) 5 Lyft manöverpanelen och tryck på knappen PÅ (ON). 6 Dra skärmen och tryck på det språk du vill välja. 7 Om följande skärm visas väljer du land eller region. 8 Läs meddelandena och följ instruktionerna på skärmen.
3. Installera bläckbehållaren 1 Om färgen inte visas på skärmen sedan du installerat bläckbehållaren kanske bläckbehållarens färg är fel eller så kan du ha installerat en bläckbehållare med ett annat modellnummer som inte stöds av skrivaren. Antingen installerar du en bläckbehållare med rätt färg, eller så använder du den tillhandahållna bläckbehållaren för konfigurationen. Öppna skannerenheten/luckan. ör inte hållaren för skrivhuvudet (A) förrän den R har stannat.
3 Öppna pappersledarna och justera sedan den främre ledaren efter märket A4. 7 Om följande skärm visas väljer du OK. 4 a L ägg i vanligt A4-papper med utskriftssidan vänd nedåt. b Skjut på den högra pappersledaren för att justera den efter pappersbuntens sida. 8 Se till att ett mönster skrivs ut för Justering av skrivhuvud (Print Head Alignment). Det tar ungefär 2 minuter att slutföra utskriften. c J ustera pappersbunten efter pappersledaren framför.
5. Förbereda för anslutning Använd endast skrivare a Tryck på knappen Stopp (Stop) på skrivaren. I följande beskrivning beskrivs smarttelefoner och surfplattor kollektivt som smarttelefon. 1 Välj Nästa (Next). b Välj Anslut inte (Do not connect) > Ja (Yes) i nämnd ordning. 2 Kontrollera att följande skärm visas. Installationen är nu klar. Fortsätt till sida 8 för att gå till faxinställningar. Härifrån fortsätter du till ett steg beroende på hur du använder skrivaren.
Använda installations-CD:n (endast Windows) a Sätt i installations-CD:n i datorn. ■■ Om du använder Windows 10 eller Windows 8.1: c Om följande skärm visas klickar du på Kör Msetup4.exe (Run Msetup4.exe). När detta meddelande inte visas (eller har stängts) 1. Klicka på Utforskaren (File Explorer) i aktivitetsfältet. eller 2. Klicka på Den här datorn (This PC) på den vänstra sidan av det öppnade fönstret. 3. Dubbelklicka på CD-ROM-ikonen på den högra sidan av fönstret.
iOS 6-B. Ansluta till smarttelefon Android Du behöver ställa in en anslutning för varje smarttelefon. Fortsätt med installationen från steg 1 för varje smarttelefon. Förberedelse • Slå på Wi-Fi på smarttelefonen. • Om du har en trådlös router ansluter du smarttelefonen till den trådlösa router du vill ansluta till skrivaren. * Information om användning hittar du i smarttelefonens och den trådlösa routerns handböcker, eller kan du kontakta tillverkaren.
Förfarandena nedan varierar beroende på om du använder iOS eller Android. Välj operativsystem och fortsätt till förfarandet. a Tryck på Inställningar (Settings) på hemskärmen på din smarttelefon och tryck på Canon_ij_XXXX i Wi-Fi-inställningarna. a Tryck på den installerade applikationens programvara. b Följ instruktionerna på skärmen för att registrera skrivaren. b Tryck på den installerade applikationens programvara. c Följ instruktionerna på skärmen för att registrera skrivaren.
Fylla på fotopapper Fyll bara på fotopapper i det bakre facket. 1 Öppna det bakre fackets lock och dra ut pappersstödet. 3 a Lägg i flera ark fotopapper med utskriftssidan vänd uppåt. b Skjut på den högra pappersledaren för att justera den efter pappersbuntens sida. a b 2 4 Stäng luckan för matningsfacket. 5 a Dra ut utmatningsfacket. b Öppna utmatningsfackets förlängningsdel. Läs meddelandet på skrivarens skärm och registrera informationen för det ilagda pappret.
1. Kontroller medfølgende komponenter □ Strømledning □ blekktanker til oppsett □ Installerings-CD-ROM for Windows PC □M odulær kabel 5 Løft betjeningspanelet og trykk på PÅ (ON)-knappen. 6 Dra over skjermen, og trykk språk du ønsker å velge. 7 Hvis følgende skjermbilde vises, tapper du for å velge ditt land eller region. 8 Les meldingene, og følg instruksjonene på skjermen.
3. Installere blekktank 1 Hvis fargen ikke vises på skjermen, selv om du har installert blekktanken, kan det være at fargen på blekktanken er feil eller at du har installert en blekktank som ikke støttes av skriveren (f.eks. en blekktank med annet modellnummer). Installer en blekktank for riktig farge, eller bruk den medfølgende blekktanken for oppsett. Åpne skanneenheten/dekselet. Ikke rør skrivehodeholderen (A) før den stanser av seg selv.
3 Åpne papirførerne, og juster deretter førerne foran etter A4-merkene. 7 Hvis det følgende skjermbildet vises, velger du OK. 4 a L egg inn papir i A4-størrelse med utskriftssiden ned. b Skyv den høyre papirføreren slik at den ligger inntil siden på papirstabelen. 8 Kontroller at et mønster skrives ut for Justering av skrivehodet (Print Head Alignment). Det tar omtrent 2 minutter å fullføre utskriften. c Juster papirstabelen med papirføreren foran. b a c 9 5 a Å pne dokumentdekselet.
5. Forberedelser for tilkobling Bruk bare skriver a Trykk på Stopp (Stop)-knappen på skriveren. I beskrivelsen nedenfor brukes smarttelefon både om smarttelefoner og nettbrett. 1 Velg Neste (Next). b Velg Ikke koble til (Do not connect) > Ja (Yes) i denne rekkefølgen. 2 Kontroller at følgende skjermbilde vises. Oppsettet er nå ferdig. Gå til side 8 for å fortsette oppsett av faks. Herfra velger du neste trinn etter hvordan du bruker skriveren.
Bruke installerings-CD-ROM (bare Windows) a Sett inn installerings-CD-ROM-en i datamaskinen. ■■ Når du bruker Windows 10 eller Windows 8.1: b Klikk på følgende melding når den vises til høyre på dataskjermen. c Hvis følgende skjermbilde vises, klikker du på Kjør Msetup4.exe (Run Msetup4.exe). Når denne meldingen ikke vises (eller har blitt borte) 1. Klikk på Filutforsker (File Explorer) på oppgavelinjen. eller 2. Klikk på Denne PC-en (This PC) på venstre side i vinduet som åpnes. 3.
iOS 6-B. Koble til smarttelefon Android Du må konfigurere tilkobling for hver smarttelefon. Fortsett med installasjonen fra trinn 1 for hver smarttelefon. Forberedelse • Slå på Wi-Fi på smarttelefonen. • Hvis du har en trådløs ruter, kobler du smarttelefonen til den trådløse ruteren som du vil koble til skriveren. * Fremgangsmåten for dette finner du i manualene for smarttelefonen og den trådløse ruteren, eller du kan kontakte produsentene.
Fremgangsmåten nedenfor vil variere avhengig av om du bruker iOS eller Android. Velg operativsystem, og gå fremgangsmåten for det aktuelle systemet. a Trykk på Innstillinger (Settings) på smarttelefonens hjem-skjerm, og velg Canon_ij_XXXX i Wi-Fiinnstillingene. a Trykk på den installerte programvaren. b Følg instruksjonene på skjermen for å registrere skriveren. b Trykk på den installerte programvaren. c Følg instruksjonene på skjermen for å registrere skriveren.
Legge i fotopapir Fotopapir skal legges i bakskuffen. 1 Åpne bakskuffdekselet, og trekk ut papirstøtten. 3 a Legg inn flere ark fotopapir med utskriftssiden opp. b Skyv den høyre papirføreren slik at den ligger inntil siden på papirstabelen. a b 2 4 Lukk spordekselet for mating. 5 a Trekk ut papirutmatingsbrettet. b Åpne mottakerbrettforlengelsen. a Å pne spordekselet for mating. b Dra den høyre papirføreren til enden.
1. Kontrollér medfølgende elementer □ Netledning □ Blækbeholdere til konfiguration □ Installations-cd-rom til Windows-pc □ Sikkerhedsoplysninger og vigtige oplysninger 5 Løft kontrolpanelet, og tryk på knappen TIL (ON). 6 Træk skærmen, og tryk på sprog for at vælge det. 7 Hvis følgende skærmbillede vises, skal du trykke på dit land eller område for at vælge det. 8 Læs meddelelserne, og følg instruktionerne på skærmen. □ Modulært kabel □ Før du begynder (denne manual) 2.
3. Installation af blækbeholder 1 Hvis farven ikke vises på skærmen, selvom du har installeret blækbeholderen, er farven i blækbeholderen muligvis forkert, eller du har muligvis installeret en blækbeholder, der ikke understøttes af denne printer, f.eks. en blækbeholder med en andet modelnummer. Du skal enten installere en blækbeholder med den korrekte farve eller bruge den medfølgende blækbeholder til konfigurationen. Åbn scanningsenheden/dækslet.
3 Åbn papirstyrene, og justér herefter styreren foran med A4-mærket. 7 Hvis følgende skærmbillede vises, skal du vælge OK. 4 a I læg A4-papir i almindelige størrelse med udskriftssiden nedad. b Skub højre papirstyr for at justere det med siden af det ilagte papir. 8 Kontrollér, at der udskrives et mønster for Printhovedjustering (Print Head Alignment). Det tager ca. 2 minutter at afslutte udskrivningen. c Juster papiret med papirstyret foran. b a c 9 5 a Å bn dokumentdækslet.
5. Klargøring af tilslutning Brug kun printer a Tryk på knappen Stop på printeren. I følgende beskrivelse refereres der samlet til smartphones og tablet-enheder som smartphone. 1 Vælg Næste (Next). b Vælg Opret ikke forbindelse (Do not connect) > Ja (Yes) i denne rækkefølge. 2 Sørg for, at følgende skærmbillede vises. Setup er nu fuldført. For at fortsætte med faxkonfigurationen skal du fortsætte til side 8. Herfra skal du fortsætte til et trin i henhold til, hvordan du bruger printeren.
Brug af installations-cd-rom (kun Windows) a Læg installations-cd-rom'en i din computer. ■■ Ved brug af Windows 10 eller Windows 8.1: b Når følgende meddelelse vises i højre side af din computerskærm, skal du klikke på den. c Hvis følgende skærmbillede vises, skal du klikke på Kør Msetup4.exe (Run Msetup4.exe). Hvis denne meddelelse ikke vises (eller er forsvundet) 1. Klik på Stifinder (File Explorer) på proceslinjen. eller 2. K lik på Denne pc (This PC) i venstre side af det åbne vindue. 3.
iOS 6-B. Tilslutning til smartphone Android Du skal have en forbindelse sat op for hver smartphone. Fortsæt setup fra trin 1 for hver smartphone. Forberedelse • Aktivér Wi-Fi på din smartphone. • Hvis du har en trådløs router, skal du tilslutte din smartphone til den trådløse router, der skal sluttes til printeren. * For funktioner henvises til brugervejledningen til din smartphone og den trådløse router. Ellers kan du kontakte de pågældende producenter.
Fremgangsmåderne herunder afhænger af iOS eller Android. Vælg dit operativsystem, og fortsæt til fremgangsmåden for det. a Tryk på Indstillinger (Settings) på startskærmen på din smartphone, og tryk på Canon_ij_XXXX under Wi-Fi indstillinger. a Tryk på den installerede applikationssoftware. b Følg instruktionerne på skærmen for at registrere printeren.
Ilægning af fotopapir Læg kun fotopapir i den bagerste bakke. 1 Åbn dækslet til bagerste bakke og træk papirstøtten ud. 3 a Ilæg flere ark fotopapir med udskriftssiden opad. b Skub højre papirstyr for at justere det med siden af det ilagte papir. a b 2 4 Luk arkføderdækslet. 5 a Træk udbakken til papir ud. b Åbn forlængeren til udbakken. Læs meddelelsen på printerens skærm, og læg mærke til oplysningerne om det ilagte papir. a Å bn arkføderdækslet. b Skub højre papirstyr ud til enden.
1. Toimitettujen tuotteiden tarkistus 5 Nosta käyttöpaneeli ja paina KÄYTÖSSÄ (ON) -painiketta. 6 Vedä näyttöä ja valitse kieli napauttamalla. 7 Jos seuraava näyttö avautuu, valitse asuinmaasi tai -alueesi napauttamalla sitä. 8 Lue viestit ja noudata näytössä näkyviä ohjeita. □ Mustesäiliöt asennusta varten □ Virtajohto □M odulaarinen kaapeli □ Asennus-CD Windows PC -tietokoneelle □ Turvallisuus ja tärkeitä tietoja □ Aloitusopas (tämä käyttöopas) 2.
3. Mustesäiliön asentaminen 1 Jos väri ei näy näytössä, vaikka olet asentanut mustesäiliön, mustesäiliön väri voi olla väärä tai olet voinut asentaa mustesäiliön, jonka mallinumeroa tämä tulostin ei tue. Asenna joko oikean värin mustesäiliö tai käytä asennusta varten toimitettua mustesäiliötä. Avaa skannausyksikkö/kansi. Älä koske tulostuspään pidikkeeseen (A), ennen kuin se pysähtyy. 5 Asenna kaikki mustesäiliöt samalla tavalla kuin vaiheessa 4 ja varmista sitten, että kaikki värit näkyvät näytössä.
3 Avaa paperiohjaimet ja kohdista sitten ohjain A4merkin eteen. 7 Jos seuraava näyttö tulee näkyviin, valitse OK. 4 a A seta tavallinen A4-kokoinen paperi tulostuspuoli alaspäin. b Liu'uta oikeaa paperiohjainta niin, että se asettuu paperipinon reunaa vasten. 8 Varmista, että Tulostuspään kohdistus (Print Head Alignment) -toiminnon kuvio tulostuu. Tulostaminen kestää noin 2 minuuttia. c K ohdista paperipino edessä olevaa paperiohjainta vasten.
5. Yhteyden valmistelu Käytä vain tulostinta a Paina tulostimen Pysäytä (Stop) -painiketta. Seuraavassa kuvauksessa älypuhelimista ja tabletlaitteista käytetään yhdessä nimitystä älypuhelin. 1 Valitse Seuraava (Next). b Valitse Älä yhdistä (Do not connect) > Kyllä (Yes) tässä järjestyksessä. 2 Varmista, että seuraava näyttö tulee näkyviin. Asetus on nyt tehty. Jatka faksin asetusta sivulta 8. Jatka tästä eteenpäin kohdasta, joka vastaa tulostimen käyttötapaa.
Asennus-CD-levyn käyttö (vain Windows) a Aseta asennus-CD-levy tietokoneeseen. ■■ Kun käytössä on Windows 10 tai Windows 8.1: b Kun seuraava viesti tulee näkyviin tietokoneen näytön oikeaan reunaan, napsauta sitä. c Jos seuraava näyttö tulee näkyviin, valitse Suorita Msetup4.exe (Run Msetup4.exe). d Jos Käyttäjätilien valvonta (User Account Control) -valintaikkuna tulee näkyviin, valitse Kyllä (Yes). Jos tämä viesti ei tule näkyviin (tai on poistunut) 1.
iOS 6-B. Yhdistäminen älypuhelimeen Android Yhteys pitää asettaa jokaiseen älypuhelimeen. Jatka asetusta kohdasta 1 jokaiselle älypuhelimelle. Valmistelu • Ota Wi-Fi-yhteys käyttöön älypuhelimessa. • Jos käytät langatonta reititintä, yhdistä älypuhelin siihen langattomaan reitittimeen, johon haluat yhdistää tulostimen. * Katso lisätietoja älypuhelimen ja langattoman reitittimen käyttöohjeesta tai ota yhteys kyseisen laitteen valmistajaan. 1 Asenna Canon PRINT Inkjet/SELPHY -sovellus älypuhelimeen.
Seuraavat toiminnot vaihtelevat iOS- tai Android-järjestelmän mukaan. Valitse käyttöjärjestelmä ja jatka sen mukaan. a Napauta Asetukset (Settings) älypuhelimen aloitusnäytössä ja napauta Canon_ij_XXXX Wi-Fiasetuksissa. a Napauta asennettua sovellusta. b Jatka tulostimen rekisteröintiä noudattamalla näytössä näkyviä ohjeita. Jos Canon_ij_XXXX ei näy luettelossa, katso alta "Tulostimen valmistelu" tulostimen käyttämiseksi ja toista sitten vaihe a. b Napauta asennettua sovellusta.
Valokuvapaperin lisääminen Lisää valokuvapaperia ainoastaan takalokeroon. 1 Avaa takalokeron kansi ja vedä paperituki ulos. 3 a Aseta useita arkkeja valokuvapaperia tulostuspuoli ylöspäin. b Liu'uta oikeaa paperiohjainta niin, että se asettuu paperipinon reunaa vasten. a b 2 4 Sulje syöttöaukon kansi. 5 a Vedä paperin luovutustaso esiin. b Avaa luovutustason jatke. a A vaa syöttöaukon kansi. b Liu'uta oikea paperiohjain reunaan.
RMC (Regulatory Model Code): K10458
Access Online Manual Zugriff auf das Online-Handbuch Accedere al Manuale online Acceso al Manual en línea Läs Onlinehandbok Åbn Online vejledning From Web site Über eine Website Dal sito Web Desde el sitio web Från webbplatsen Fra websted Accès au Manuel en ligne Online handleiding openen Acesse o Manual On-line Αποκτήστε πρόσβαση στο Εγχειρίδιο Online Gå til Nettbasert manual Online-käyttöopas-oppaan käyttö À partir du site Web Van de website A partir do site Από τη διαδικτυακή τοποθεσία Fra nettsiden Ve