Getting Started Démarrage Inbetriebnahme Aan de Slag-gids Guida Rapida Para Começar Guía de inicio Ξεκινώντας Uppstartsguide Komme i gang Før du begynder Aloitusopas Read Safety and Important Information (addendum) first. Lire Sécurité et informations importantes (addendum) en premier. Lesen Sie Sicherheitsinformationen und wichtige Hinweise (Anhang) zuerst. Lees eerst Veiligheidsinformatie en belangrijke informatie (addendum).
1 2 How to Hold Printer Manipulation de l'imprimante Halten des Druckers De printer vasthouden Come sospendere la stampante Como segurar a impressora Cómo sujetar la impresora Πώς να κρατάτε τον εκτυπωτή Hur du håller skrivaren Hvordan holde skriveren Sådan holder du printeren Tulostimen pitäminen Installing the Printer.................................................................................. page 1 Installation de l'imprimante.......................................................................
□ Power cord 5 Lift the operation panel and press the ON button. 6 Drag the screen and tap the language to select. 7 Read the messages and follow the on-screen instructions. □ Ink tanks for setup □ Safety and Important Information □ Setup CD-ROM for Windows PC ENGLISH 1. Checking Included Items □ Getting Started (this manual) 2. Removing Packing Materials / Turning on Printer When printing starts, the operation panel lifts up automatically and the paper output tray comes out.
2 a C OMPLETELY remove the orange tape. b Remove the protective wrap. b 3 6 LIFT UP the scanning unit / cover, and then close it. a Hook the orange cap with your finger to remove it GENTLY. If an error message appears on the screen, make sure the ink tanks are installed correctly. 4. L oading Paper / Aligning Print Head To obtain a better print result, print a pattern for Print Head Alignment and scan it. Do not push the both sides of the ink tank with the Y-shape air hole blocked.
a L oad plain LTR or A4 size paper with the print side facing down. b Slide the right paper guide to align it with the side of the paper stack. 7 c A lign the paper stack with the paper guide in front. a a O pen the document cover. b Load the printed pattern on the platen glass. a b b ENGLISH 3 c 4 Attach the cassette cover and insert the cassette. 8 After closing the document cover, select OK. 9 If the following screen appears, select OK.
5. Preparing for Connection Use Only Printer a Tap the Stop button. In the following description, smartphones and tablet devices are collectively described as smartphone. 1 Select Next. b Select Do not connect > Yes in this order. 2 Make sure that the following screen appears. The setup is now complete. From here on, proceed to a step according to how you use the printer. • To use the printer by connecting only to a computer or both to a computer and smartphone "6-A.
Using Setup CD-ROM (Windows Only) ENGLISH a Load the Setup CD-ROM in your computer. ■■ When using Windows 10 or Windows 8.1: b When the following message appears on the right side of your computer screen, click it. c If the following screen appears, click Run Msetup4.exe. When This Message Does Not Appear (or Has Disappeared) 1. Click File Explorer on the taskbar. or 2. Click This PC on the left side of the opened window. 3. Double-click the CD-ROM icon on the right side of the window.
iOS 6-B. Connecting to Smartphone Android You need a connection setup for each smartphone. Proceed with the setup from step 1 for each smartphone. Preparation • Turn on Wi-Fi on your smartphone. • If you have a wireless router, connect your smartphone to the wireless router you want to connect to the printer. * For operations, refer to manuals of your smartphone and the wireless router or contact those manufacturers. 1 Install the application software Canon PRINT Inkjet/SELPHY in your smartphone.
a Tap Settings on your smartphone's home screen, and tap Canon_ij_XXXX in the Wi-Fi settings. a Tap the installed application software. ENGLISH Procedures below vary depending on iOS or Android. Select your operating system and proceed to its procedure. b Follow the on-screen instructions to register the printer. If Canon_ij_XXXX does not appear on the list, see "Preparation for Printer" below to operate the printer, and then repeat step a. b Tap the installed application software.
Loading Photo Paper Load photo paper in the rear tray. 1 Open the rear tray cover and pull out the paper support. 3 a Load several sheets of photo paper with the print side facing up. b Slide the right paper guide to align it with the side of the paper stack. a b 4 2 Close the feed slot cover. Read the message on the printer's screen and register the information of the loaded paper. a O pen the feed slot cover. b Slide the right paper guide to the end.
1. Vérification des éléments fournis □ Cordon d'alimentation □ Cartouches d'encre pour la configuration □ CD-ROM d'installation pour PC Windows □ Sécurité et informations importantes □ Démarrage (ce manuel) 5 Levez le panneau de contrôle et appuyez sur le bouton MARCHE (ON). 6 Faites glisser l'écran et touchez la langue à sélectionner. 7 Lisez les messages et suivez les instructions à l'écran. FRANÇAIS 2.
2 a R etirez COMPLÈTEMENT la bande orange. b Retirez l'emballage de protection. b 3 6 SOULEVEZ l'unité de numérisation / capot, puis fermez-la. a Placez vos doigts sur la capsule orange et retirezla DOUCEMENT. Si un message d'erreur apparaît à l'écran, vérifiez que les cartouches d'encre sont correctement installées. 4.
3 a C hargez du papier ordinaire au format LTR ou A4 face à imprimer vers le bas. b Faites glisser le guide papier droit de manière à l'aligner avec le côté de la pile de papier. 7 c A lignez la pile de papier avec le guide papier avant. a a O uvrez le capot du scanner. b Chargez le motif imprimé sur la vitre d'exposition. a b b 4 Attachez le couvercle de la cassette et insérez la cassette. 8 Après avoir fermé le capot du scanner, sélectionnez OK.
5. Préparation de la connexion Dans la description suivante, les smartphones et les tablettes sont regroupés sous le terme smartphone. 1 Utiliser uniquement l'imprimante a Touchez le bouton Arrêt (Stop). Sélectionnez Suivant. b Sélectionnez Ne pas connecter > Oui dans cet ordre. 2 Assurez-vous que l'écran suivant s'affiche. La configuration est terminée. Poursuivez avec l'étape correspondant à la manière dont vous utilisez l'imprimante.
Utilisation du CD-ROM d'installation (Windows uniquement) a Chargez le CD-ROM d'installation dans votre ordinateur. ■■ Si vous utilisez Windows 10 ou Windows 8.1 : b Lorsque le message suivant apparaît sur la droite de l'écran de l'ordinateur, cliquez dessus. d Si la boîte de dialogue Contrôle de compte d'utilisateur apparaît, cliquez sur Oui. ou FRANÇAIS c Si l'écran suivant s'affiche, cliquez sur Exécuter Msetup4.exe. Lorsque ce message n'apparaît pas (ou n'est plus affiché) 1.
iOS 6-B. Connexion à un smartphone Android Vous devez configurer une connexion pour chaque smartphone. Poursuivez la configuration à partir de l'étape 1 pour chaque smartphone. Préparation • Activez Wi-Fi sur votre smartphone. • Si vous avez un routeur sans fil, connectez votre smartphone au routeur sans fil que vous voulez connecter à l'imprimante. * Pour le fonctionnement, reportez-vous aux manuels de votre smartphone et du routeur sans fil ou prenez contact avec les fabricants.
Les procédures ci-dessous varient selon que vous utilisez iOS ou Android. Sélectionnez votre système d'exploitation et poursuivez avec la procédure s'y rapportant. a Touchez Réglages sur l'écran d'accueil du smartphone, puis touchez Canon_ij_XXXX dans les réglages Wi-Fi. a Touchez le logiciel d'application installé. Si Canon_ij_XXXX n'apparaît pas dans la liste, reportez-vous à la section « Préparation de l'imprimante » ci-dessous pour faire fonctionner l'imprimante, puis répétez l'étape a.
Chargement de papier photo Chargez du papier photo dans le réceptacle arrière. 1 Ouvrez le couvercle du réceptacle arrière et retirez le support papier. 3 a Chargez plusieurs feuilles de papier photo face à imprimer vers le haut. b Faites glisser le guide papier droit de manière à l'aligner avec le côté de la pile de papier. a b 4 2 Fermez le couvercle de la fente d'alimentation. Lisez le message sur l'écran de l'imprimante et enregistrez les informations du papier chargé.
1. Überprüfen des Lieferumfangs □ Netzkabel 5 Heben Sie das Bedienfeld an und drücken Sie auf die Taste EIN (ON). 6 Ziehen Sie den Bildschirm und tippen Sie auf die gewünschte Sprache. 7 Lesen Sie die Meldungen und befolgen Sie die Anweisungen auf dem Bildschirm. □ Tintenbehälter für die Einrichtung □ Sicherheitsinformationen und wichtige Hinweise □ Inbetriebnahme (dieses Handbuch) □ Installations-CD-ROM für Windows-PCs 2.
2 a E ntfernen Sie das orangefarbene Klebeband VOLLSTÄNDIG. b Entfernen Sie die Schutzhülle. b 3 6 HEBEN Sie das Scan-Modul/die Abdeckung AN und schließen Sie es/sie dann. a Ergreifen Sie mit Ihrem Finger die orangefarbene Kappe, um sie VORSICHTIG zu entfernen. Wenn eine Fehlermeldung auf dem Bildschirm angezeigt wird, stellen Sie sicher, dass die Tintenbehälter ordnungsgemäß eingesetzt sind. 4.
3 a L egen Sie mehrere Blätter Normalpapier des Formats LTR oder A4 mit der bedruckbaren Seite nach unten ein. b Verschieben Sie die rechte Papierführung, um sie an der Seite des Papierstapels auszurichten. c Richten Sie den Papierstapel an der vorderen Papierführung aus. a 7 a Ö ffnen Sie die Vorlagenabdeckung. b Legen Sie das gedruckte Muster auf die Auflagefläche. a b b c Bringen Sie die Kassettenabdeckung an und setzen Sie die Kassette ein.
5. Vorbereiten der Verbindung Nur Drucker verwenden In der folgenden Beschreibung werden Smartphones und Tablet-Geräte gesamthaft als Smartphones bezeichnet. 1 a Tippen Sie auf die Schaltfläche Stopp (Stop). Wählen Sie Weiter (Next). b Wählen Sie Nicht verbinden (Do not connect) > Ja (Yes) in dieser Reihenfolge. 2 Stellen Sie sicher, dass der folgende Bildschirm angezeigt wird. Die Einrichtung ist jetzt abgeschlossen.
Verwenden der Installations-CD-ROM (nur Windows) a Legen Sie die Installations-CD-ROM in Ihren Computer ein. ■■ Bei Verwendung von Windows 10 oder Windows 8.1: b Wenn die folgende Nachricht rechts auf Ihrem Computerbildschirm angezeigt wird, klicken Sie darauf. Wenn diese Meldung nicht (oder nicht mehr) angezeigt wird 1. Klicken Sie auf der Taskleiste auf Datei-Explorer (File Explorer). 2. Klicken Sie links im geöffneten Fenster auf Dieser PC (This PC). 3.
iOS 6-B. Herstellen einer Verbindung mit einem Smartphone Android Für jedes Smartphone muss eine Verbindung eingerichtet werden. Fahren Sie mit der Einrichtung für jedes Smartphone ab Schritt 1 fort. Vorbereitung • Aktivieren Sie auf Ihrem Smartphone Wi-Fi. • Wenn Sie einen Wireless Router besitzen, stellen Sie eine Verbindung zwischen Ihrem Smartphone und dem Wireless Router her, den Sie mit dem Drucker verbinden möchten.
Die unten aufgeführten Verfahren unterscheiden sich auf iOS und Android. Wählen Sie Ihr Betriebssystem aus und fahren Sie bei den entsprechenden Verfahren fort. a Tippen Sie auf dem Startbildschirm Ihres Smartphones auf Einstellungen (Settings) und anschließend in den Wi-Fi-Einstellungen auf Canon_ij_XXXX. a Tippen Sie auf die installierte Anwendungssoftware. b Befolgen Sie die Anweisungen auf dem Bildschirm, um den Drucker zu registrieren. b Tippen Sie auf die installierte Anwendungssoftware.
Einlegen von Fotopapier Legen Sie Fotopapier in das hintere Fach ein. 1 Öffnen Sie die Abdeckung des hinteren Fachs und ziehen Sie die Papierstütze heraus. 3 a Legen Sie mehrere Blätter Fotopapier mit der bedruckbaren Seite nach oben ein. b Verschieben Sie die rechte Papierführung, um sie an der Seite des Papierstapels auszurichten. a b 4 2 Schließen Sie die Abdeckung für den Einzugsschacht.
1. Meegeleverde artikelen controleren □ Netsnoer □ Inkttanks voor installatie □ Installatie-cd-rom voor Windows-pc □ Veiligheidsinformatie en belangrijke informatie □ Aan de Slag-gids (deze handleiding) 5 Til het bedieningspaneel op en druk op de knop AAN (ON). 6 Sleep over het scherm en tik op de gewenste taal. 7 Lees de berichten en volg de instructies op het scherm. 2.
2 a V erwijder de oranje tape HELEMAAL. b Verwijder de beschermende verpakking. b 3 6 Duw de scaneenheid/klep OMHOOG en sluit deze. a Verwijder het oranje kapje VOORZICHTIG met uw vinger. Als er een foutbericht op het scherm wordt weergegeven, controleert u of de inkttanks correct zijn geïnstalleerd. 4. P apier plaatsen/uitlijnen Printkop Voor een beter afdrukresultaat drukt u een patroon Uitlijning printkop (Print Head Alignment) af en scant u dit.
3 a P laats normaal papier van LTR- of A4-formaat met de afdrukzijde omlaag. b Verschuif de rechter papiergeleider om deze uit te lijnen met de zijkant van de papierstapel. 7 c Lijn de papierstapel uit met de papiergeleider aan de voorkant. a a O pen de documentklep. b Plaats het afgedrukte patroon op de glasplaat. a b b c 8 Sluit de documentklep en selecteer OK. 9 Selecteer OK als het volgende scherm wordt weergegeven. NEDERLANDS 4 Bevestig de cassetteklep en plaats de cassette.
5. Voorbereiden op de verbinding In de volgende omschrijving worden smartphones en tablets gezamenlijk aangeduid met de term smartphone. 1 Alleen printer gebruiken a Tik op de knop Stoppen (Stop). Selecteer Volgende (Next). b Selecteer Niet verbinden (Do not connect) > Ja (Yes) in deze volgorde. 2 Controleer of het volgende scherm wordt weergegeven. De installatie is nu voltooid. Ga vanaf hier verder naar de stap die past bij de manier waarop u de printer gebruikt.
De installatie-cd-rom (alleen Windows) gebruiken a Plaats de installatie-cd-rom in de computer. ■■ Wanneer u Windows 10 of Windows 8.1 gebruikt: b Wanneer het volgende bericht aan de rechterkant van uw computerscherm wordt weergegeven, klikt u erop. c Klik op Msetup4.exe uitvoeren (Run Msetup4.exe) als het volgende scherm wordt weergegeven. Wanneer dit bericht niet wordt weergegeven (of wanneer het is verdwenen) 1. Klik op Verkenner (File Explorer) op de taakbalk. of 2.
iOS 6-B. Verbinden met een smartphone Android U moet een verbinding instellen voor elke smartphone. Ga verder met de installatie vanaf stap 1 voor elke smartphone. Voorbereiding • Schakel Wi-Fi in op uw smartphone. • Als u een draadloze router hebt, sluit u uw smartphone aan op de draadloze router die u met de printer wilt verbinden. * Raadpleeg voor de stappen de handleiding van uw smartphone en de draadloze router of neem contact op met de desbetreffende fabrikant.
De onderstaande procedures zijn van toepassing op iOS of Android. Selecteer uw besturingssysteem en ga verder naar de desbetreffende procedure. a Tik op Instellingen (Settings) op het beginscherm van uw smartphone en tik op Canon_ij_XXXX bij de instellingen voor Wi-Fi. a Tik op de geïnstalleerde toepassing. b Volg de instructies op het scherm om de printer te registreren. b Tik op de geïnstalleerde toepassing. c Volg de instructies op het scherm om de printer te registreren.
Fotopapier plaatsen Plaats fotopapier in de achterste lade. 1 Open de klep van de achterste lade en trek de papiersteun uit. 3 a Plaats een aantal vellen fotopapier met de afdrukzijde omhoog. b Verschuif de rechter papiergeleider om deze uit te lijnen met de zijkant van de papierstapel. a b 4 2 Sluit het klepje over de invoersleuf. Lees het bericht op het scherm van de printer en registreer de gegevens van het geplaatste papier. a O pen het klepje over de invoersleuf.
1. Verifica degli elementi inclusi □ Cavo di alimentazione 5 Sollevare il pannello dei comandi e premere il pulsante ON. 6 Scorrere lo schermo e toccare la lingua per selezionarla. 7 Leggere i messaggi e seguire le istruzioni a video. □ Serbatoi d'inchiostro per eseguire l'impostazione □ Informazioni importanti e sulla sicurezza □ Guida Rapida (questo manuale) □ CD-ROM di installazione per PC Windows 2.
2 a R imuovere COMPLETAMENTE il nastro arancione. b Rimuovere l'involucro di protezione. b 3 6 SOLLEVARE, e successivamente chiudere, l'unità di scansione/il coperchio. a Afferrare il coperchietto arancione con il dito per rimuoverlo DELICATAMENTE. Se viene visualizzato un messaggio di errore sullo schermo, assicurarsi che i serbatoi d'inchiostro siano installati correttamente. 4.
3 a C aricare carta normale in formato LTR o A4 con il lato di stampa rivolto verso il basso. b Far scorrere la guida della carta di destra per allinearla con il lato della pila di carta. c Allineare la pila di carta con la guida della carta anteriore. a 7 a A prire il coperchio dei documenti. b Caricare il motivo stampato sul piano di lettura in vetro. a b b c 4 Posizionare il coperchio del cassetto e inserire il cassetto. 8 Dopo avere chiuso il coperchio dei documenti, selezionare OK.
5. Preparazione per la connessione Utilizzare esclusivamente la stampante a Toccare il pulsante Stop. Nella seguente descrizione, i dispositivi smartphone e tablet sono indicati collettivamente come smartphone. 1 Selezionare Avanti (Next). b Selezionare Non connettere (Do not connect) > Sì (Yes) in questo ordine. 2 Accertarsi che venga visualizzata la schermata seguente. L'impostazione è ora completata. D'ora in avanti, passare al punto adeguato in base a come si utilizza la stampante.
Utilizzo del CD-ROM di installazione (solo Windows) a Caricare il CD-ROM di installazione nel computer. ■■ Quando si utilizza Windows 10 o Windows 8.1: b Quando il seguente messaggio viene visualizzato nella parte destra dello schermo del computer, fare clic sul messaggio. c Se viene visualizzata questa schermata, fare clic su Esegui Msetup4.exe (Run Msetup4.exe). d Se viene visualizzata la finestra di dialogo Controllo account utente (User Account Control), fare clic su Sì (Yes).
iOS 6-B. Connessione a smartphone Android È necessario impostare una connessione per ogni smartphone. Procedere con l'impostazione dal passo 1 per ciascuno smartphone. Preparazione • Attivare il Wi-Fi sullo smartphone. • Se si dispone di un router wireless, connettere lo smartphone al router wireless da collegare alla stampante. * Per informazioni sul funzionamento, fare riferimento ai manuali dello smartphone e del router wireless o contattare i rispettivi produttori.
Le procedure riportate di seguito variano a seconda se il sistema operativo è iOS o Android. Selezionare il sistema operativo in uso e continuare con la procedura appropriata. a Toccare Impostazioni (Settings) nella schermata iniziale dello smartphone, quindi toccare Canon_ij_XXXX nelle impostazioni Wi-Fi. a Toccare il software dell'applicazione installata. b Seguire le istruzioni a video per registrare la stampante.
Caricamento di carta fotografica Caricare la carta fotografica nel vassoio posteriore. 1 Aprire il coperchio del vassoio posteriore ed estrarre il supporto per la carta. 3 a Caricare diversi fogli di carta fotografica con il lato di stampa rivolto verso l'alto. b Far scorrere la guida della carta di destra per allinearla con il lato della pila di carta. a b 4 2 Chiudere il coperchio dell'alimentatore manuale.
1. Verificando os itens incluídos □ Cabo de alimentação 5 Levante o painel de controle e aperte o botão ATIVADO (ON). 6 Arraste a tela e toque em um idioma para selecioná-lo. 7 Leia as mensagens e siga as instruções na tela. □ Cartuchos de tinta para configuração □ Informações Importantes e Sobre Segurança □ Para Começar (este manual) □ CD-ROM de instalação para PC com Windows 2.
2 a R emova COMPLETAMENTE a fita laranja. b Retire a película de proteção. b 3 6 LEVANTE a unidade de digitalização/tampa e abaixe-a em seguida. a Puxe a aba laranja CUIDADOSAMENTE. Se uma mensagem de erro for exibida na tela, verifique se os cartuchos de tinta estão instalados corretamente. 4. C olocando papel/ alinhando a cabeça de impressão Não empurre as laterais do cartucho de tinta se a saída de ar em forma de Y estiver bloqueada. 4 Não toque.
3 a C oloque papel tamanho LTR ou A4 comum com o lado a ser impresso voltado para baixo. b Deslize a guia do papel direita para alinhá-la à pilha de papel. 7 c A linhe a pilha de papel com a guia do papel frontal. a a A bra a tampa de documentos. b Coloque o padrão impresso no vidro de exposição. a b b c 4 Coloque a tampa do cassete e insira o cassete. 8 Depois de fechar a tampa de documentos, selecione OK. 9 Se a tela a seguir for exibida, selecione OK.
5. Preparando para a conexão Usar somente a impressora Na descrição abaixo, smartphone se refere coletivamente a smartphones e tablets. 1 a Toque no botão Parar (Stop). Selecione Avançar (Next). b Selecione Não conectar (Do not connect) > Sim (Yes) nesta ordem. 2 Certifique-se de que a tela a seguir seja exibida. A configuração foi concluída. Daqui em diante, prossiga para uma etapa que esteja de acordo com a forma como você usa a impressora.
Usando o CD-ROM de instalação (somente Windows) a Insira o CD-ROM de instalação no computador. ■■ Ao usar Windows 10 ou Windows 8.1: b Clique na mensagem a seguir quando ela for exibida no lado direito da tela do computador. Quando esta mensagem não aparecer (ou tiver desaparecido) 1. Clique em Explorador de Arquivos (File Explorer) na barra de ferramentas. c Se a tela a seguir for exibida, clique em Executar Msetup4.exe (Run Msetup4.exe).
iOS 6-B. Conectando a um smartphone Android Você precisará configurar uma conexão para cada smartphone. Comece a configuração de cada smartphone pela etapa 1. Preparação • Ative o Wi-Fi em seu smartphone. • Se você tiver um roteador sem fio, conecte seu smartphone ao roteador sem fio que você deseja conectar à impressora. * Para obter informações sobre operações, consulte os manuais do seu smartphone e do seu roteador sem fio ou entre em contato com seus respectivos fabricantes.
Os procedimentos descritos abaixo podem variar para iOS e Android. Selecione seu sistema operacional e continue com o procedimento. a Toque em Configurações (Settings) na tela inicial do seu smartphone e depois em Canon_ij_XXXX nas configurações de Wi-Fi. a Toque no software aplicativo instalado. b Siga as instruções na tela para registrar a impressora. Se Canon_ij_XXXX não estiver na lista, consulte a seção "Preparação para a impressora" abaixo para operar a impressora e repita a etapa a.
Colocando papel fotográfico Coloque o papel fotográfico na bandeja traseira. 1 Abra a tampa da bandeja traseira e puxe o suporte de papel para fora. 3 a Coloque várias folhas de papel fotográfico com o lado a ser impresso voltado para cima. b Deslize a guia do papel direita para alinhá-la à pilha de papel. a b 4 2 Feche a tampa do slot de alimentação. Leia a mensagem exibida na tela da impressora e registre as informações do papel carregado. a A bra a tampa do slot de alimentação.
□ Cable de alimentación □ Depósitos de tinta para configuración □ Información de seguridad e información importante □ Guía de inicio (este manual) □ CD-ROM de instalación para Windows PC 5 Levante el panel de control y pulse el botón ACTIVADO (ON). 6 Arrastre la pantalla y puntee el idioma para seleccionar. 7 Lea los mensajes y siga las instrucciones que aparezcan en pantalla. ESPAÑOL 1. Comprobación de los elementos suministrados 2.
2 a R etire COMPLETAMENTE la cinta naranja. b Retire el envoltorio protector. b 3 6 LEVANTE la cubierta/unidad de escaneado y luego ciérrela. a Sujete la tapa naranja con su dedo para quitarla SUAVEMENTE. Si aparece un mensaje de error en la pantalla, asegúrese de que los depósitos de tinta estén instalados correctamente. 4. C arga de papel/Alineación del cabezal de impresión 4 No empuje los lados del depósito de tinta si el orificio de aire en forma de Y está bloqueado. No tocar.
a C argue papel normal de tamaño LTR o A4 con el lado de impresión hacia abajo. b D eslice la guía del papel derecha para alinearla con el lado de la pila de papel. 7 c A linee la pila de papel con la guía del papel en primer plano. a a A bra la cubierta de documentos. b Cargue el patrón impreso en el cristal de la platina. ESPAÑOL 3 a b b c 4 Coloque la cubierta del cassette e inserte el cassette. 8 Después de cerrar la cubierta de documentos, seleccione OK.
5. Preparación para la conexión Usar solo la impresora En la siguiente descripción, los teléfonos inteligentes y las tabletas se describen en conjunto como teléfonos inteligentes. 1 a Puntee en el botón Parar (Stop). Seleccione Siguiente (Next). b Seleccione No conectar (Do not connect) > Sí (Yes) en este orden. 2 Asegúrese de que aparezca la siguiente pantalla. Ha finalizado la configuración. A partir de aquí, continúe en el paso que corresponda según su uso de la impresora.
Uso del CD-ROM de instalación (solo para Windows) ESPAÑOL a Cargue el CD-ROM de instalación en su ordenador. ■■ Si utiliza Windows 10 o Windows 8.1: b Cuando se muestre el mensaje siguiente en el lado derecho de la pantalla del ordenador, haga clic en él. c Si aparece la siguiente pantalla, haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe). d Si se muestra el cuadro de diálogo Control de cuentas de usuario (User Account Control), haga clic en Sí (Yes).
iOS 6-B. Conexión con un teléfono inteligente Android Necesitará configurar una conexión para cada teléfono inteligente. Complete la configuración desde el paso 1 para cada teléfono inteligente. Preparativos • Active la Wi-Fi en su teléfono inteligente. • Si dispone de un router inalámbrico, conecte su teléfono inteligente al router inalámbrico para conectar con la impresora.
a Toque Ajustes (Settings) en la pantalla de inicio de su teléfono inteligente y después toque Canon_ij_XXXX en los ajustes de Wi-Fi. a Puntee el software de la aplicación instalado. ESPAÑOL Los procedimientos a continuación varían en función de iOS o Android. Seleccione su sistema operativo y continúe con el procedimiento correspondiente. b Siga las instrucciones en pantalla para registrar la impresora.
Carga de papel fotográfico Cargue el papel fotográfico en la bandeja posterior. 1 Abra la cubierta de la bandeja posterior y retire el soporte del papel. 3 a Cargue varias hojas de papel fotográfico con el lado de impresión hacia arriba. b Deslice la guía del papel derecha para alinearla con el lado de la pila de papel. a b 4 2 Cierre la cubierta de la ranura de alimentación. Lea el mensaje en la pantalla de la impresora y registre la información del papel cargado.
1. Έλεγχος των στοιχείων που περιλαμβάνονται □ Καλώδιο τροφοδοσίας □ Δοχεία μελάνης για εγκατάσταση □ Πληροφορίες για την ασφάλεια και σημαντικές πληροφορίες □ CD-ROM εγκατάστασης για Windows PC 5 Ανασηκώστε τον πίνακα λειτουργίας και πατήστε το κουμπί ON. 6 Σύρετε την οθόνη και πατήστε τη γλώσσα για να την επιλέξετε. 7 Διαβάστε τα μηνύματα και ακολουθήστε τις οδηγίες στην οθόνη. □ Ξεκινώντας (αυτό το εγχειρίδιο) ΕΛΛΗΝΙΚΗ 2.
2 a Α φαιρέστε ΕΝΤΕΛΩΣ την πορτοκαλί ταινία. b Αφαιρέστε το προστατευτικό περιτύλιγμα. b 3 6 ΑΝΑΣΗΚΩΣΤΕ τη μονάδα σάρωσης / κάλυμμα και, στη συνέχεια, κλείστε ξανά. a Τραβήξτε το πορτοκαλί κάλυμμα έξω με τα δάκτυλά σας και αφαιρέστε το ΠΡΟΣΕΚΤΙΚΑ. Αν εμφανιστεί μήνυμα σφάλματος στην οθόνη, βεβαιωθείτε ότι τα δοχεία μελάνης έχουν εγκατασταθεί σωστά. 4.
3 a Τοποθετήστε απλό χαρτί μεγέθους LTR ή A4 με την πλευρά εκτύπωσης στραμμένη προς τα κάτω. b Σύρετε τον δεξιό οδηγό χαρτιού για να τον ευθυγραμμίσετε με την πλαϊνή πλευρά της στοίβας των χαρτιών. c Ευθυγραμμίστε τη στοίβα των χαρτιών με τον οδηγό χαρτιού μπροστά. a 7 a Α νοίξτε το κάλυμμα εγγράφων. b Τοποθετήστε το εκτυπωμένο μοτίβο στη γυάλινη επιφάνεια σάρωσης. a b b 4 Συνδέστε το κάλυμμα κασέτας και τοποθετήστε την κασέτα. 8 Αφού κλείσετε το κάλυμμα εγγράφων, επιλέξτε OK.
5. Προετοιμασία για σύνδεση Χρήση μόνο του εκτυπωτή a Πατήστε το κουμπί Στοπ (Stop). Στην ακόλουθη περιγραφή, τα smartphones και οι συσκευές tablet περιγράφονται συλλογικά ως smartphone. 1 Επιλέξτε Επόμενο (Next). b Επιλέξτε Μην γίνει σύνδεση (Do not connect) > Ναι (Yes) με τη συγκεκριμένη σειρά. 2 Βεβαιωθείτε ότι εμφανίζεται η παρακάτω οθόνη. Η ρύθμιση έχει ολοκληρωθεί. Στη συνέχεια, προχωρήστε σε κάποιο βήμα ανάλογα με τον τρόπο με τον οποίο χρησιμοποιείτε τον εκτυπωτή.
Χρήση CD-ROM εγκατάστασης (μόνο για Windows) a Τοποθετήστε το CD-ROM εγκατάστασης στον υπολογιστή σας. ■■ Κατά τη χρήση Windows 10 ή Windows 8.1: Όταν αυτό το μήνυμα δεν εμφανίζεται (ή έχει εξαφανιστεί) 1. Κάντε κλικ στην επιλογή Εξερεύνηση αρχείων (File Explorer), στη γραμμή εργασιών. ή c Αν εμφανιστεί η ακόλουθη οθόνη, κάντε κλικ στην επιλογή Εκτέλεση Msetup4.exe (Run Msetup4.exe). ΕΛΛΗΝΙΚΗ b Όταν το ακόλουθο μήνυμα εμφανίζεται στη δεξιά πλευρά της οθόνης του υπολογιστή, κάντε κλικ σε αυτό. 2.
iOS 6-B. Σύνδεση σε smartphone Android Απαιτείται ρύθμιση της σύνδεσης για κάθε smartphone. Προχωρήστε στη ρύθμιση από το βήμα 1 για κάθε smartphone. Προετοιμασία • Ενεργοποιήστε το Wi-Fi στο smartphone σας. • Αν έχετε ασύρματο δρομολογητή, συνδέστε το smartphone στον ασύρματο δρομολογητή που θέλετε να συνδέσετε στον εκτυπωτή. * Για τις διαδικασίες, ανατρέξτε στα εγχειρίδια του smartphone και του ασύρματου δρομολογητή ή επικοινωνήστε με τους κατασκευαστές τους.
Οι παρακάτω διαδικασίες ποικίλουν ανάλογα με το iOS ή το Android. Επιλέξτε το λειτουργικό σας σύστημα και προχωρήστε στην αντίστοιχη διαδικασία. a Πατήστε Ρυθμίσεις (Settings) στην αρχική οθόνη του smartphone και μετά πατήστε Canon_ij_XXXX στις ρυθμίσεις Wi-Fi. a Πατήστε το εγκατεστημένο λογισμικό εφαρμογής σας. Αν το Canon_ij_XXXX δεν εμφανιστεί στη λίστα, ανατρέξτε στην ενότητα "Προετοιμασία για τον εκτυπωτή" παρακάτω για να λειτουργήσει ο εκτυπωτής και, στη συνέχεια, επαναλάβετε το βήμα a.
Τοποθέτηση φωτογραφικού χαρτιού Τοποθετήστε φωτογραφικό χαρτί στην πίσω θήκη. 1 Ανοίξτε το κάλυμμα πίσω θήκης και τραβήξτε έξω την υποστήριξη χαρτιού. 3 a Τοποθετήστε πολλά φύλλα φωτογραφικού χαρτιού με την πλευρά εκτύπωσης στραμμένη προς τα πάνω. b Σύρετε τον δεξιό οδηγό χαρτιού για να τον ευθυγραμμίσετε με την πλαϊνή πλευρά της στοίβας των χαρτιών. a b 4 2 a Α νοίξτε το κάλυμμα υποδοχής τροφοδοσίας. b Σύρετε τον δεξιό οδηγό χαρτιού έως το τέρμα. Κλείστε το κάλυμμα υποδοχής τροφοδοσίας.
1. Kontrollera medföljande delar □ Strömkabel 5 Lyft manöverpanelen och tryck på knappen PÅ (ON). 6 Dra skärmen och tryck på det språk du vill välja. 7 Läs meddelandena och följ instruktionerna på skärmen. □ Bläckbehållare för installation □ Information om säkerhet och annan viktig information □ Installations-CD för Windows PC □ Uppstartsguide (denna handbok) 2.
2 a T a HELT bort den orange tejpen. b Ta bort skyddsomslaget. b 3 6 LYFT UPP skannerenheten/luckan och stäng den sedan. a Ta tag i det orange locket med fingret och ta bort det FÖRSIKTIGT. Om ett felmeddelande visas på skärmen ska du se till att bläckbehållarna har installerats korrekt. 4. F ylla på papper/ justera skrivhuvudet För att få ett bättre utskriftsresultat ska du skriva du ut ett mönster för Justering av skrivhuvud (Print Head Alignment) och skannar det.
3 a L ägg i vanligt LTR- eller A4-papper med utskriftssidan vänd nedåt. b Skjut på den högra pappersledaren för att justera den efter pappersbuntens sida. 7 c J ustera pappersbunten efter pappersledaren framför. a a Ö ppna dokumentluckan. b Lägg det utskrivna mönstret på glasskivan. a b b 4 Sätt dit kassettlocket och sätt i kassetten. 8 Stäng sedan dokumentluckan och välj OK. 9 Om följande skärm visas väljer du OK. SVENSKA c Följande bild visar läget efter att kassetten har satts in.
5. Förbereda för anslutning I följande beskrivning beskrivs smarttelefoner och surfplattor kollektivt som smarttelefon. 1 Använd endast skrivare a Tryck på Stopp (Stop) -knappen. Välj Nästa (Next). b Välj Anslut inte (Do not connect) > Ja (Yes) i nämnd ordning. 2 Kontrollera att följande skärm visas. Installationen är nu klar. Härifrån fortsätter du till ett steg beroende på hur du använder skrivaren.
Använda installations-CD:n (endast Windows) a Sätt i installations-CD:n i datorn. ■■ Om du använder Windows 10 eller Windows 8.1: c Om följande skärm visas klickar du på Kör Msetup4.exe (Run Msetup4.exe). När detta meddelande inte visas (eller har stängts) 1. Klicka på Utforskaren (File Explorer) i aktivitetsfältet. eller 2. Klicka på Den här datorn (This PC) på den vänstra sidan av det öppnade fönstret. 3. Dubbelklicka på CD-ROM-ikonen på den högra sidan av fönstret.
iOS 6-B. Ansluta till smarttelefon Android Du behöver ställa in en anslutning för varje smarttelefon. Fortsätt med installationen från steg 1 för varje smarttelefon. Förberedelse • Slå på Wi-Fi på smarttelefonen. • Om du har en trådlös router ansluter du smarttelefonen till den trådlösa router du vill ansluta till skrivaren. * Information om användning hittar du i smarttelefonens och den trådlösa routerns handböcker, eller kan du kontakta tillverkaren.
Förfarandena nedan varierar beroende på om du använder iOS eller Android. Välj operativsystem och fortsätt till förfarandet. a Tryck på Inställningar (Settings) på hemskärmen på din smarttelefon och tryck på Canon_ij_XXXX i Wi-Fi-inställningarna. a Tryck på den installerade applikationens programvara. b Följ instruktionerna på skärmen för att registrera skrivaren. b Tryck på den installerade applikationens programvara. c Följ instruktionerna på skärmen för att registrera skrivaren.
Fylla på fotopapper Fyll bara på fotopapper i det bakre facket. 1 Öppna det bakre fackets lock och dra ut pappersstödet. 3 a Lägg i flera ark fotopapper med utskriftssidan vänd uppåt. b Skjut på den högra pappersledaren för att justera den efter pappersbuntens sida. a b 4 2 Stäng luckan för matningsfacket. Läs meddelandet på skrivarens skärm och registrera informationen för det ilagda pappret. a Ö ppna luckan för matningsfacket. b Skjut den högra pappersledaren ut mot kanten.
1. Kontroller medfølgende komponenter □ Strømledning □ Blekktanker til oppsett □ Installerings-CD-ROM for Windows PC □ Sikkerhetsinformasjon og viktig informasjon □ Komme i gang (denne manualen) 5 Løft betjeningspanelet og trykk på PÅ (ON)knappen. 6 Dra over skjermen, og trykk språk du ønsker å velge. 7 Les meldingene, og følg instruksjonene på skjermen. 2. Fjerne beskyttelsesmateriale/ slå på skriveren 1 Fjern beskyttelsesmaterialet (f.eks.
2 a F jern den oransje tapen HELT. b Fjern beskyttelsen rundt. b 3 6 LØFT OPP skanneenheten/dekselet, og lukk den/ det igjen. a Ta tak i det oransje lokket, og fjern det FORSIKTIG. Hvis det vises en feilmelding på skjermen, kontrollerer du at blekktankene er riktig installert. 4. L egg i papir/Justere skrivehodet Ikke trykk inn begge sider av blekktanken når det Y-formede lufthullet er blokkert. 4 Ikke rør.
3 a L egg inn papir i LTR- eller A4-størrelse med utskriftssiden ned. b Skyv den høyre papirføreren slik at den ligger inntil siden på papirstabelen. 7 c Juster papirstabelen med papirføreren foran. a a Å pne dokumentdekselet. b Legg utskriftsmønsteret på glassplaten. a b b 4 Fest kassettdekselet og sett i kassetten. 8 Lukk dokumentdekselet, og velg deretter OK. 9 Hvis det følgende skjermbildet vises, velger du OK. Den følgende figuren viser tilstanden etter at kassetten er satt i.
5. Forberedelser for tilkobling Bruk bare skriver a Trykk på Stopp (Stop)-knappen. I beskrivelsen nedenfor brukes smarttelefon både om smarttelefoner og nettbrett. 1 Velg Neste (Next). b Velg Ikke koble til (Do not connect) > Ja (Yes) i denne rekkefølgen. 2 Kontroller at følgende skjermbilde vises. Oppsettet er nå ferdig. Herfra velger du neste trinn etter hvordan du bruker skriveren. • Hvis du vil bruke skriveren ved å kun koble til en datamaskin, eller både til datamaskin og smarttelefon ”6-A.
Bruke installerings-CD-ROM (bare Windows) a Sett inn installerings-CD-ROM-en i datamaskinen. ■■ Når du bruker Windows 10 eller Windows 8.1: c Hvis følgende skjermbilde vises, klikker du på Kjør Msetup4.exe (Run Msetup4.exe). d Hvis dialogboksen Brukerkontokontroll (User Account Control) vises, klikker du på Ja (Yes). Når denne meldingen ikke vises (eller har blitt borte) 1. Klikk på Filutforsker (File Explorer) på oppgavelinjen. eller 2.
iOS 6-B. Koble til smarttelefon Android Du må konfigurere tilkobling for hver smarttelefon. Fortsett med installasjonen fra trinn 1 for hver smarttelefon. Forberedelse • Slå på Wi-Fi på smarttelefonen. • Hvis du har en trådløs ruter, kobler du smarttelefonen til den trådløse ruteren som du vil koble til skriveren. * Fremgangsmåten for dette finner du i manualene for smarttelefonen og den trådløse ruteren, eller du kan kontakte produsentene.
Fremgangsmåten nedenfor vil variere avhengig av om du bruker iOS eller Android. Velg operativsystem, og gå fremgangsmåten for det aktuelle systemet. a Trykk på Innstillinger (Settings) på smarttelefonens hjem-skjerm, og velg Canon_ij_XXXX i Wi-Fiinnstillingene. a Trykk på den installerte programvaren. b Følg instruksjonene på skjermen for å registrere skriveren. b Trykk på den installerte programvaren. c Følg instruksjonene på skjermen for å registrere skriveren.
Legge i fotopapir Fotopapir skal legges i bakskuffen. 1 Åpne bakskuffdekselet, og trekk ut papirstøtten. 3 a Legg inn flere ark fotopapir med utskriftssiden opp. b Skyv den høyre papirføreren slik at den ligger inntil siden på papirstabelen. a b 4 2 Lukk spordekselet for mating. Les meldingen på skriverskjermbildet, og registrer informasjonen om papiret som er lagt i. a Å pne spordekselet for mating. b Dra den høyre papirføreren til enden.
1. Kontrollér medfølgende elementer □ Netledning □ Blækbeholdere til konfiguration □ Sikkerhedsoplysninger og vigtige oplysninger □ Installations-cd-rom til Windows-pc 5 Løft kontrolpanelet, og tryk på knappen TIL (ON). 6 Træk skærmen, og tryk på sprog for at vælge det. 7 Læs meddelelserne, og følg instruktionerne på skærmen. □ Før du begynder (denne manual) 2.
2 b 3 6 a F jern ALT orange tape. b Fjern beskyttelsesfilmen. LØFT scanningsenheden/dækslet, og luk det. a Træk i den orange hætte med fingrene for at fjerne den, LANGSOMT. Hvis der vises en fejlmeddelelse på skærmen, skal du sørge for, at blækbeholderne er isat korrekt. 4. I lægning af papir/justering af printhoved For at opnå et bedre resultat, skal du udskrive et mønster for Printhovedjustering (Print Head Alignment) og scanne det.
3 a I læg LTR- eller A4-papir i almindelige størrelse med udskriftssiden nedad. b Skub højre papirstyr for at justere det med siden af det ilagte papir. 7 c Juster papiret med papirstyret foran. a a Å bn dokumentdækslet. b Læg det udskrevne mønster på glaspladen. a b b c 4 Sæt kassettedækslet på, og isæt kassetten. 8 Når du har lukket dokumentdækslet, skal du vælge OK. 9 Hvis følgende skærmbillede vises, skal du vælge OK. Følgende figur viser tilstanden, efter kassetten er isat.
5. Klargøring af tilslutning Brug kun printer a Tryk på knappen Stop. I følgende beskrivelse refereres der samlet til smartphones og tablet-enheder som smartphone. 1 Vælg Næste (Next). b Vælg Opret ikke forbindelse (Do not connect) > Ja (Yes) i denne rækkefølge. 2 Sørg for, at følgende skærmbillede vises. Setup er nu fuldført. Herfra skal du fortsætte til et trin i henhold til, hvordan du bruger printeren.
Brug af installations-cd-rom (kun Windows) a Læg installations-cd-rom'en i din computer. ■■ Ved brug af Windows 10 eller Windows 8.1: b Når følgende meddelelse vises i højre side af din computerskærm, skal du klikke på den. Hvis denne meddelelse ikke vises (eller er forsvundet) 1. Klik på Stifinder (File Explorer) på proceslinjen. eller c Hvis følgende skærmbillede vises, skal du klikke på Kør Msetup4.exe (Run Msetup4.exe). 2. Klik på Denne pc (This PC) i venstre side af det åbne vindue. 3.
iOS 6-B. Tilslutning til smartphone Android Du skal have en forbindelse sat op for hver smartphone. Fortsæt setup fra trin 1 for hver smartphone. Forberedelse • Aktivér Wi-Fi på din smartphone. • Hvis du har en trådløs router, skal du tilslutte din smartphone til den trådløse router, der skal sluttes til printeren. * For funktioner henvises til brugervejledningen til din smartphone og den trådløse router. Ellers kan du kontakte de pågældende producenter.
Fremgangsmåderne herunder afhænger af iOS eller Android. Vælg dit operativsystem, og fortsæt til fremgangsmåden for det. a Tryk på Indstillinger (Settings) på startskærmen på din smartphone, og tryk på Canon_ij_XXXX under Wi-Fi indstillinger. a Tryk på den installerede applikationssoftware. b Følg instruktionerne på skærmen for at registrere printeren.
Ilægning af fotopapir Læg kun fotopapir i den bagerste bakke. 1 Åbn dækslet til bagerste bakke og træk papirstøtten ud. 3 a Ilæg flere ark fotopapir med udskriftssiden opad. b Skub højre papirstyr for at justere det med siden af det ilagte papir. a b 4 2 Luk arkføderdækslet. Læs meddelelsen på printerens skærm, og læg mærke til oplysningerne om det ilagte papir. a Å bn arkføderdækslet. b Skub højre papirstyr ud til enden.
1. Toimitettujen tuotteiden tarkistus □ Virtajohto 5 Nosta käyttöpaneeli ja paina KÄYTÖSSÄ (ON) -painiketta. 6 Vedä näyttöä ja valitse kieli napauttamalla. 7 Lue viestit ja noudata näytössä näkyviä ohjeita. □ Mustesäiliöt asennusta varten □ Turvallisuus ja tärkeitä tietoja □ Asennus-CD Windows PC -tietokoneelle □ Aloitusopas (tämä käyttöopas) 2.
2 a Irrota oranssi teippi KOKONAAN. b Irrota suojakelmu. b 3 6 NOSTA YLÖS skannausyksikkö/kansi ja sitten sulje se. a Ota sormilla kiinni oranssista suojuksesta ja irrota se VAROVASTI. Jos virheilmoitus tulee näkyviin näyttöön, tarkista, että mustesäiliöt on asennettu oikein. 4. P aperin lisääminen/ tulostuspään kohdistus Parempien tulostustulosten saavuttamiseksi tulosta kuvio Tulostuspään kohdistus (Print Head Alignment) ja skannaa se.
3 a A seta tavallinen LTR- tai A4-kokoinen paperi tulostuspuoli alaspäin. b Liu'uta oikeaa paperiohjainta niin, että se asettuu paperipinon reunaa vasten. 7 c K ohdista paperipino edessä olevaa paperiohjainta vasten. a a A vaa asiakirjakansi. b Aseta tulostettu kuvio tasolle. a b b c 4 Aseta kasetin kansi ja aseta kasetti. 8 Kun olet sulkenut asiakirjakannen, valitse OK. 9 Jos seuraava näyttö tulee näkyviin, valitse OK. Seuraavassa kuvassa näkyy tila, kun kasetti on asetettu.
5. Yhteyden valmistelu Käytä vain tulostinta a Napauta Pysäytä (Stop) -painiketta. Seuraavassa kuvauksessa älypuhelimista ja tabletlaitteista käytetään yhdessä nimitystä älypuhelin. 1 Valitse Seuraava (Next). b Valitse Älä yhdistä (Do not connect) > Kyllä (Yes) tässä järjestyksessä. 2 Varmista, että seuraava näyttö tulee näkyviin. Asetus on nyt tehty. Jatka tästä eteenpäin kohdasta, joka vastaa tulostimen käyttötapaa. • Tulostimen käyttö vain tietokone tai tietokone ja älypuhelin yhdistettynä ”6-A.
Asennus-CD-levyn käyttö (vain Windows) a Aseta Asennus-CD-levy tietokoneeseen. ■■ Kun käytössä on Windows 10 tai Windows 8.1: b Kun seuraava viesti tulee näkyviin tietokoneen näytön oikeaan reunaan, napsauta sitä. c Jos seuraava näyttö tulee näkyviin, valitse Suorita Msetup4.exe (Run Msetup4.exe). d Jos Käyttäjätilien valvonta (User Account Control) -valintaikkuna tulee näkyviin, valitse Kyllä (Yes). Jos tämä viesti ei tule näkyviin (tai on poistunut) 1.
iOS 6-B. Yhdistäminen älypuhelimeen Android Yhteys pitää asettaa jokaiseen älypuhelimeen. Jatka asetusta kohdasta 1 jokaiselle älypuhelimelle. Valmistelu • Ota Wi-Fi-yhteys käyttöön älypuhelimessa. • Jos käytät langatonta reititintä, yhdistä älypuhelin siihen langattomaan reitittimeen, johon haluat yhdistää tulostimen. * Katso lisätietoja älypuhelimen ja langattoman reitittimen käyttöohjeesta tai ota yhteys kyseisen laitteen valmistajaan. 1 Asenna Canon PRINT Inkjet/SELPHY -sovellus älypuhelimeen.
Seuraavat toiminnot vaihtelevat iOS- tai Android-järjestelmän mukaan. Valitse käyttöjärjestelmä ja jatka sen mukaan. a Napauta Asetukset (Settings) älypuhelimen aloitusnäytössä ja napauta Canon_ij_XXXX Wi-Fiasetuksissa. a Napauta asennettua sovellusta. b Jatka tulostimen rekisteröintiä noudattamalla näytössä näkyviä ohjeita. Jos Canon_ij_XXXX ei näy luettelossa, katso alta ”Tulostimen valmistelu” tulostimen käyttämiseksi ja toista sitten vaihe a. b Napauta asennettua sovellusta.
Valokuvapaperin lisääminen Lisää valokuvapaperia ainoastaan takalokeroon. 1 Avaa takalokeron kansi ja vedä paperituki ulos. 3 a Aseta useita arkkeja valokuvapaperia tulostuspuoli ylöspäin. b Liu'uta oikeaa paperiohjainta niin, että se asettuu paperipinon reunaa vasten. a b 4 2 Sulje syöttöaukon kansi. Lue tulostimen näytössä näkyvä ilmoitus ja rekisteröi lisätyn paperin tiedot. a A vaa syöttöaukon kansi. b Liu'uta oikea paperiohjain reunaan.
RMC (Regulatory Model Code): K10455
Access Online Manual Zugriff auf das Online-Handbuch Accedere al Manuale online Acceso al Manual en línea Läs Onlinehandbok Åbn Online vejledning From Web site Über eine Website Dal sito Web Desde el sitio web Från webbplatsen Fra websted Accès au Manuel en ligne Online handleiding openen Acesse o Manual On-line Αποκτήστε πρόσβαση στο Εγχειρίδιο Online Gå til Nettbasert manual Online-käyttöopas-oppaan käyttö À partir du site Web Van de website A partir do site Από τη διαδικτυακή τοποθεσία Fra nettsiden Ve