TS200 series Onlinehandbok Basfunktion Underhåll Översikt över enheten Information om papper Skriva ut Kopiera Vanliga frågor Lista över supportkoder för fel svenska (Swedish)
Innehåll Använda Onlinehandbok. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symboler som används i den här handboken. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Användare av pekaktiverade enheter (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Varumärken och licenser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Basfunktion. . . . . . . . . . . . . .
Transportera skrivaren. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Hålla hög utskriftskvalitet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Huvudkomponenter och deras användning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Huvudkomponenter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pappersinställningar i skrivardrivrutinen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Olika utskriftsmetoder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Ange Pappersstorlek och Orientering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Ställa in antal kopior och utskriftsordning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Papperet är fläckigt / Den utskrivna ytan är repig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Det går inte att slutföra utskriften. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Ofullständiga linjer eller linjer som saknas (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Ofullständiga bilder eller bilder som saknas (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1700. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 1890. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 4102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 4103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Använda Onlinehandbok Driftsmiljö Symboler som används i den här handboken Användare av pekaktiverade enheter (Windows) Skriva ut onlinehandboken Varumärken och licenser Skärmdumpar i den här manualen 7
Symboler som används i den här handboken Varning Om anvisningarna inte följs och utrustningen används felaktigt kan det leda till dödsfall eller allvarliga personskador. Följ anvisningarna för att garantera säkerheten. Försiktighet Om anvisningarna inte följs och utrustningen används felaktigt kan det leda till personskador eller skador på utrustningen. Följ anvisningarna för att garantera säkerheten. Viktigt! Anvisningar med viktig information.
Användare av pekaktiverade enheter (Windows) Om du vill kunna använda pekåtgärder måste du byta ut "högerklicka" i det här dokumentet med åtgärden som är inställd i operativsystemet. Om åtgärden i operativsystemet till exempel är inställd på "tryck och håll" byter du ut "högerklicka" mot "tryck och håll".
Varumärken och licenser • Microsoft är ett registrerat varumärke som tillhör Microsoft Corporation. • Windows är ett varumärke eller registrerat varumärke som tillhör Microsoft Corporation i USA och/eller andra länder. • Windows Vista är ett varumärke eller registrerat varumärke som tillhör Microsoft Corporation i USA och/ eller andra länder. • Internet Explorer är ett varumärke eller registrerat varumärke som tillhör Microsoft Corporation i USA och/eller andra länder.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved.
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc.
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LEADTOOLS Copyright (C) 1991-2009 LEAD Technologies, Inc.
MIT License Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Basfunktion Skriva ut foton från en dator 21
Skriva ut foton från en dator Det här avsnittet beskriver hur du skriver ut foton med My Image Garden. 1. Öppna pappersstödet (A). 2. Dra ut utmatningsfacket (B) och utmatningsfackets förlängningsdel (C). 3. Fyll på papper vertikalt MED UTSKRIFTSSIDAN VÄND MOT DIG. 4. Justera pappersledaren (D) mot papperets vänstra sida.
När du har lagt i papper i det bakre facket tänds någon av lamporna Papper (Paper). 5. Kontrollera pappersstorleksinställningen. Om pappersstorleken som har lagts i det bakre facket skiljer sig från den indikationen (E) i lampan Papper (Paper) ska du trycka på knappen Välj papper (Paper Select) (F) för att ändra val. 6. Klicka på ikonen My Image Garden (G) i Quick Menu. Fönstret Guidemeny (Guide Menu) visas.
8. Klicka på mappen (I) med foton som du vill skriva ut. 9. Klicka på de foton (J) som du vill skriva ut. För Windows: Om du vill välja två eller flera foton samtidigt klickar du på dem medan du håller inne Ctrl-tangenten. För macOS: Om du vill välja två eller flera foton samtidigt klickar du på dem medan du håller inne kommandotangenten. 10. Klicka på Skriv ut (Print) (K). 11. Ange antalet kopior osv. För Windows: Ange antal kopior, skrivarens namn, mediatyp osv.
För macOS: Ange antalet kopior. 12. Starta utskriften. För Windows: Klicka på Skriv ut (Print). För macOS: Klicka på Skriv ut (Print). När dialogrutan Skriv ut startar ska du ange skrivarnamnet, pappersstorleken osv. och sedan klicka på Skriv ut (Print). Obs! • My Image Garden ger dig möjlighet att använda bilder på din dator, till exempel foton tagna med en digitalkamera, på flera olika sätt.
Hantera papper, FINE-kassetter osv.
Fylla på papper Fylla på vanligt papper/fotopapper 27
Fylla på vanligt papper/fotopapper Du kan fylla på vanligt papper eller fotopapper. Viktigt! • Om du beskär vanligt papper till en mindre storlek som 10 x 15 cm (4 x 6 tum) för att göra en provutskrift kan det orsaka pappersstopp. Obs! • Vi rekommenderar att du använder äkta fotomedia från Canon när du skriver ut fotografier. Mer information om originalpapper från Canon finns i Medietyper som stöds.
2. Dra ut utmatningsfacket (B) och utmatningsfackets förlängningsdel (C). 3. Fyll på papper vertikalt så långt åt höger som möjligt i det bakre facket MED UTSKRIFTSSIDAN VÄND MOT DIG. 4. Justera pappersledaren (D) mot papperets vänstra sida. Skjut inte ihop pappersledaren för hårt mot papperet. Papperet kanske inte matas korrekt. Viktigt! • Lägg alltid i papperet i stående orientering (E). Om du fyller på papperet i liggande orientering (F) kan det fastna.
Obs! • Fyll inte på papper över påfyllningsmarkeringen (G). När du har lagt i papper i det bakre facket, tänds någon av lamporna Papper (Paper) enligt en pappersstorlek som har lagts i senast. 5. Kontrollera pappersstorleksinställningen. Om pappersstorleken som har lagts i det bakre facket skiljer sig från den indikationen (H) i lampan Papper (Paper) ska du trycka på knappen Välj papper (Paper Select) (I) för att ändra val.
• Det finns olika sorters papper, t.ex. papper med en speciell ytbeläggning för utskrift av foton med optimal kvalitet och papper som är lämpliga för dokument. Alla medietyper har förinställda inställningar (hur bläcket används och sprayas, avstånd från munstycken och så vidare) som gör att man kan skriva ut med optimal bildkvalitet oavsett papperstyp. Fel pappersinställningar kan orsaka dålig färgkvalitet på utskriften eller repor på utskriftsytan.
Byta ut en FINE-bläckkassett Byta ut en FINE-bläckkassett Bläcktips 32
Byta ut en FINE-bläckkassett När det återstående bläcket håller på att ta slut eller om fel uppstår blinkar lampan Alarm för att informera dig om felet. I det här läget kan skrivaren inte skriva ut. Räkna blinkningarna och vidta lämpliga åtgärder. Ett fel inträffar När du använder skrivaren kan periferin för pappersutmatningsfacket bli smutsigt med bläck. Innan du byter ut FINE-kassetten ska du rengöra periferin för pappersutmatningsfacket.
Välj vilken FINE-kassett som ska användas • Det kan gå åt färgbläck även när du skriver ut svartvita dokument eller om du har ställt in svartvit utskrift. Både färgbläck och svart bläck används vid vanlig rengöring och djuprengöring av skrivhuvudet, vilket kan behövas för att upprätthålla skrivarens prestanda. När bläcket tar slut byter du omedelbart ut FINE-kassetten mot en ny. Bläcktips 1. Kontrollera att strömmen är påslagen. 2. Skjut in pappersutmatningsfacket och utmatningsfackets förlängningsdel. 3.
2. Ta bort FINE-kassetten. Viktigt! • Var försiktig när du hanterar FINE-kassetten så att du inte får fläckar på kläder och omgivande ytor. • Följ de källsorteringsregler som gäller i din kommun när du kasserar tomma FINE-kassetter. 5. Förbered en ny FINE-kassett. 1. Ta ut en ny FINE-kassett ur förpackningen och ta försiktigt bort skyddstejpen (C).
Viktigt! • Om du skakar en FINE-kassett kan bläck spillas ut och ge fläckar på händer och närliggande ytor. Hantera en FINE-kassett varsamt. • Var försiktig så att du inte får fläckar på händerna och närliggande ytor av bläcket på den borttagna skyddstejpen. • Sätt aldrig tillbaka skyddstejpen om du har tagit bort den. Följ de källsorteringsregler som gäller i din kommun när du slänger förbrukningsartiklar. • Rör inte vid de elektriska kontakterna eller skrivhuvudmunstyckena på en FINE-kassett.
Viktigt! • Sätt i FINE-kassetten försiktigt så att den inte rör vid elkontakterna på hållaren för FINE-kassetter eller orsakar problem med FINE-kassetten. 2. Tryck FINE-kassetten inåt och uppåt ordentligt tills den klickar på plats. Viktigt! • Kontrollera om FINE-kassetten har installerats korrekt.
• Skrivaren kan inte skriva ut om inte både den svarta FINE-kassetten och FINE-kassetten i färg har installerats. Se till att installera båda bläckkassetterna. 7. Stäng luckan. Obs! • Om Alarm-lampan blinkar efter att luckan har stängts ska du vidta lämpliga åtgärder. Ett fel inträffar • Skrivarens ljudnivå kan vara högre under drift. 8. Justera skrivhuvudets position.
Bläcktips Hur kan bläck användas för andra syften än utskrifter? Bläck kan användas för annat än utskrifter. Bläck används inte bara till utskrifter, utan också för att rengöra skrivhuvudet för att få högsta möjliga utskriftskvalitet. Skrivaren innehåller funktionen att automatiskt rengöra munstyckena från bläck för att förhindra att de täpps igen. I rengöringsproceduren är mängden bläck som används till rengöring mycket liten.
Underhåll Om utskriften är svag eller ojämn Utföra underhåll från din dator (Windows) Utföra underhåll från din dator (macOS) Rengöring 40
Om utskriften är svag eller ojämn Underhållsprocedur Skriva ut testmönster för munstycken Granska testmönster för munstycken Rengöra skrivhuvudet Djuprengöringen av skrivhuvuden 41
Underhållsprocedur Om utskriftsresultatet är suddigt, färgerna inte skrivs ut korrekt eller utskriftsresultaten inte är tillfredsställande (t.ex. raka linjer skrivs ut feljusterade) ska du utföra underhållsproceduren nedan. Viktigt! • Skölj inte och torka inte av FINE-kassetterna. Då kan det bli problem med FINE-kassetterna. Obs! • Kontrollera om det finns bläck kvar i FINE-kassetten.
Om linjer saknas eller det finns vita horisontella ränder i mönstret: Steg3 Rengör skrivhuvudet. Från skrivaren Rengöra skrivhuvudet Från datorn • För Windows: Rengöra skrivhuvudet • För macOS: Rengöra skrivhuvudet När du har rengjort skrivhuvudet ska du skriva ut och granska ett testmönster för munstycken: Steg1 Om problemet inte är löst efter det att du genomfört steg 1 till steg 3 två gånger: Steg4 Djuprengöring av skrivhuvudet.
Om utskriftsresultaten blir ojämna genom att exempelvis raka linjer blir sneda: Steg Justera skrivhuvudet.
Skriva ut testmönster för munstycken Skriv ut testmönstret för munstyckena för att kontrollera om bläcket sprutar ut på rätt sätt från skrivhuvudmunstycket. Obs! • Om återstående bläcknivån är låg skrivs inte testmönstret för munstycken ut på rätt sätt. Byt ut den FINE-kassett som har lite bläck. Du måste förbereda: ett ark vanligt papper av A4- eller Letter-format 1. Kontrollera att strömmen är påslagen. 2. Lägg ett pappersark i A4- eller Letter-format i det bakre facket. 3.
Granska testmönster för munstycken Granska testmönster för munstycken och rengör skrivhuvudet om det behövs. 1. Kontrollera om det saknas någon linje i mönstret (A) eller om det finns vita horisontella ränder i mönstret (B).
Rengöra skrivhuvudet Rengör skrivhuvudet om det saknas linjer eller om det finns horisontella vita ränder i testmönstret för munstycken. Rengöringen åtgärdar tilltäppta munstycken och återställer skrivhuvudets status. Det går åt mycket bläck när skrivhuvudet rengörs, så rengör därför bara skrivhuvudet när det verkligen behövs. 1. Kontrollera att strömmen är påslagen. 2. Tryck på och håll ned FORTSÄTT (RESUME)-knappen och släpp den när Alarm-lampan har blinkat 2 gånger.
Djuprengöringen av skrivhuvuden Djuprengör skrivhuvudet om utskriftskvaliteten inte förbättras av den vanliga rengöringen av skrivhuvudet. Vid djuprengöring av skrivhuvudet går det åt mer bläck än vid vanlig rengöring av skrivhuvudet. Rengör därför bara skrivhuvudet när det är nödvändigt. 1. Kontrollera att strömmen är påslagen. 2. Tryck på och håll ned FORTSÄTT (RESUME)-knappen och släpp den när Alarm-lampan har blinkat 3 gånger. Skrivaren startar djuprengöring av skrivhuvudet.
Rengöring Rengöring av yttre ytor Rengöra pappersmatningshjul Rengöra inuti skrivaren (rengöra bottenplattan) 49
Rengöra pappersmatningshjul Om pappersmatningshjulen blir smutsiga eller om det sitter pappersfibrer på dem kanske inte papperet matas ordentligt. Då bör du rengöra pappersmatningshjulen. Du måste förbereda: ett ark vanligt papper i storleken A4 eller Letter eller ett rengöringsark som finns på marknaden 1. Kontrollera att strömmen är påslagen. 2. Ta bort alla papper från det bakre facket. 3. Rengör pappersmatningshjulen utan papper. 1.
53
Översikt Säkerhet Säkerhetsföreskrifter Föreskrifter WEEE (EU och EEA) Hantera föreskrifter Avbryta utskriftsjobb Förvara utskrivna bilder Juridiska begränsningar för utskrift Föreskrifter för hantering av skrivaren Transportera skrivaren Hålla hög utskriftskvalitet Huvudkomponenter och deras användning Huvudkomponenter Strömförsörjning Ändra inställningar Ändra skrivarens inställningar från datorn (Windows) Ändra skrivarens inställningar från datorn (macOS) Ändra inställningar från Manöverpanelen Specifika
Säkerhet Säkerhetsföreskrifter Föreskrifter WEEE (EU&EEA) 55
Säkerhetsföreskrifter Välja en plats • Installera inte skrivaren på en instabil plats eller på en plats där den kan utsättas för kraftiga vibrationer. • Installera inte skrivaren på mycket fuktiga eller dammiga platser, i direkt solljus, utomhus eller i närheten av en värmekälla. För att undvika brand eller elektriska stötar ska skrivaren användas under de driftförhållanden som anges i Specifikationer. • Placera inte skrivaren på en tjock matta. • Placera inte skrivaren med baksidan mot en vägg.
Föreskrifter Environmental Information Reducing your environmental impact Power Consumption and Operational Modes The amount of electricity a device consumes depends on the way the device is used. This product is designed and set in a way to allow you to reduce the power consumption. After the last print it switches to Ready Mode. In this mode it can print again immediately if required. If the product is not used for a time, the device switches to its Sleep Mode.
WEEE (EU&EEA) Only for European Union and EEA (Norway, Iceland and Liechtenstein) This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
place par les collectivités locales pour le recyclage des Déchets des Équipements Électriques et Électroniques (DEEE). Le traitement inapproprié de ce type de déchet risque d'avoir des répercussions sur l'environnement et la santé humaine, du fait de la présence de substances potentiellement dangereuses généralement associées aux équipements électriques et électroniques.
autorizado o con el servicio de recogida de basuras doméstico. Si desea más información acerca de la devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee. Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega, Islàndia i Liechtenstein) Aquest símbol indica que aquest producte no s’ha de llençar a les escombraries de la llar, d’acord amb la Directiva RAEE (2012/19/UE) i la legislació nacional.
Este símbolo indica que o produto não deve ser colocado no lixo doméstico, de acordo com a Directiva REEE (2012/19/UE) e a legislação nacional. Este produto deverá ser colocado num ponto de recolha designado, por exemplo, num local próprio autorizado quando adquirir um produto semelhante novo ou num local de recolha autorizado para reciclar resíduos de equipamentos eléctricos e electrónicos (EEE).
ανακύκλωση, επικοινωνήστε με το τοπικό γραφείο της πόλης σας, την υπηρεσία απορριμμάτων, το εγκεκριμένο σχήμα ΑΗΗΕ ή την υπηρεσία απόρριψης οικιακών αποβλήτων. Για περισσότερες πληροφορίες σχετικά με την επιστροφή και την ανακύκλωση των προϊόντων ΑΗΗΕ, επισκεφθείτε την τοποθεσία www.canon-europe.com/weee.
köps (en mot en). Olämplig hantering av avfall av den här typen kan ha en negativ inverkan på miljön och människors hälsa på grund av de potentiellt farliga ämnen som kan återfinnas i elektrisk och elektronisk utrustning. Din medverkan till en korrekt avfallshantering av den här produkten bidrar dessutom till en effektiv användning av naturresurserna.
Tylko dla krajów Unii Europejskiej oraz EOG (Norwegia, Islandia i Liechtenstein) Ten symbol oznacza, że zgodnie z dyrektywą WEEE dotyczącą zużytego sprzętu elektrycznego i elektronicznego (2012/19/UE) oraz przepisami lokalnymi nie należy wyrzucać tego produktu razem z odpadami gospodarstwa domowego. Produkt należy przekazać do wyznaczonego punktu gromadzenia odpadów, np.
mõeldud kogumispunkti. Täiendava teabe saamiseks elektri- ja elektroonikaseadmetest tekkinud jäätmete tagastamise ja ümbertöötlemise kohta võtke ühendust kohaliku omavalitsusega, asjakohase valitsusasutusega, asjakohase tootjavastutusorganisatsiooniga või olmejäätmete käitlejaga. Lisateavet leitate ka Interneti-leheküljelt www.canon-europe.com/weee.
Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/19/EU) in državno zakonodajo ne smete odvreči v gospodinjske odpadke. Ta izdelek morate odložiti na ustrezno zbiralno mesto, na primer pri pooblaščenem prodajalcu, ko kupite podoben nov izdelek ali na zbiralno mesto za recikliranje električne in elektronske opreme. Neprimerno ravnanje s takšnimi odpadki lahko negativno vpliva na okolje in človekovo zdravje zaradi nevarnih snovi, ki so povezane z električno in elektronsko opremo.
mai multe informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/ weee. Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn) Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi (2012/19/EC) i vašem nacionalnom zakonu. Ovaj proizvod je potrebno predati na posebno mjesto za sakupljanje otpada, npr.
Hantera föreskrifter Avbryta utskriftsjobb Förvara utskrivna bilder Juridiska begränsningar för utskrift Föreskrifter för hantering av skrivaren Transportera skrivaren Hålla hög utskriftskvalitet 68
Juridiska begränsningar för utskrift Att skriva ut eller göra ändringar av kopior av följande kan vara straffbart enligt lag. Den här listan är inte uttömmande. Rådgör med ett lokalt juridiskt ombud i tveksamma fall.
Baksida (1) strömkabelkontakt Anslut den medföljande nätkabeln. (2) USB-port Sätt i USB-kabeln. Kontrollera att terminalens orientering är korrekt när du ansluter USB-kabeln. Viktigt! • Rör inte metallhöljet. Detta kan medföra problem. • Dra inte ut eller sätt i USB-kabeln när skrivaren skriver ut från datorn. Detta kan medföra problem.
Insida (1) FINE-kassett (bläckkassetter) En utbytbar bläckkassett där skrivhuvud och bläckbehållare ingår. (2) Hållare för FINE-kassett Installera FINE-kassetten. FINE-kassetten i färg ska installeras i det vänstra facket och den svarta FINE-kassetten i det högra facket. Obs! • Mer information om hur du byter ut en FINE-kassett finns i Byta ut en FINE-bläckkassett. Viktigt! • Området runt delarna (A) kan vara täckta med bläck. Detta påverkar inte skrivarens prestanda. • Rör inte delarna (A).
Manöverpanel * Alla lampor på manöverpanelen är tända i figuren nedan enbart som exempel. (1) Knappen PÅ/Stopp (ON/Stop) Används för att slå på och stänga av strömmen. Om du trycker på den här knappen avbryts även användningen eller utskriften. (2) Lampan PÅ (ON) Tänds efter att ha blinkat när strömmen slås på. (3) Knappen FORTSÄTT (RESUME) Ändrar skrivarens inställningar, stänger av lampan Alarm eller väljer en underhållsmeny på skrivaren. (4) Lampan Alarm Lyser eller blinkar när ett fel inträffar.
Strömförsörjning Kontrollera att enheten är på Sätta på och stänga av skrivaren Kontrollerar Strömkontakten/nätkabeln.
Kontrollera att enheten är på PÅ (ON)-lampan lyser när skrivaren är på. Obs! • Det kan ta en stund innan skrivaren börjar skriva ut efter det att du har startat skrivaren.
Sätta på och stänga av skrivaren Sätta på skrivaren 1. Sätt på skrivaren genom att trycka på knappen PÅ/Stopp (ON/Stop). Lampan PÅ (ON) blinkar och lyser sedan med fast sken. Kontrollera att enheten är på Obs! • Det kan ta en stund innan skrivaren börjar skriva ut efter det att du har startat skrivaren. • Om Alarm-lampan blinkar kan du läsa avsnittet Ett fel inträffar. • Du kan ställa in skrivaren så att den sätts på automatiskt när ett utskriftsjobb utförs. Den här funktionen är avaktiverad som standard.
Viktigt! • När du drar ur strömkabeln efter att ha stängt av skrivaren ska du kontrollera att PÅ (ON)lampan är släckt. Obs! • Du kan ställa in skrivaren så att den stängs av automatiskt när inga åtgärder utförs eller inga utskriftsdata skickas till skrivaren under en viss tidsperiod. Det här är standardinställningen. Mer information om funktionen för automatisk avstängning finns nedan.
Kontrollerar Strömkontakten/nätkabeln. Dra ur nätkabeln en gång i månaden för att kontrollera att strömkontakten/nätkabeln inte är skadade på något av nedanstående sätt. Sådana skador är ovanliga. • • • • • Strömkontakten/nätkabeln är varm. Strömkontakten/nätkabeln är rostig. Strömkontakten/nätkabeln är böjd. Strömkontakten/nätkabeln är sliten. Strömkontakten/nätkabeln är delad.
Koppla från skrivaren Följ instruktionerna nedan för att dra ur nätkabeln. Viktigt! • Tryck på PÅ/Stopp (ON/Stop)-knappen och kontrollera sedan att PÅ (ON)-lampan har slocknat innan du drar ur nätkabeln. Om du drar ur nätkabeln medan PÅ (ON)-lampan lyser eller blinkar kan det leda till att skrivhuvudet torkar ut eller täpps igen och att utskriftskvaliteten försämras. 1. Stäng av skrivaren genom att trycka på knappen PÅ/Stopp (ON/Stop). 2. Kontrollera att PÅ (ON)-lampan är släckt. 3. Dra ur nätkabeln.
Ändra inställningar Ändra skrivarens inställningar från datorn (Windows) Ändra skrivarens inställningar från datorn (macOS) Ändra inställningar från Manöverpanelen 85
Ändra skrivarens inställningar från datorn (Windows) Ändra utskriftsalternativ Skapa en vanlig utskriftsprofil Välj vilken FINE-kassett som ska användas Stänga av och sätta på Skrivare Ändra driftläge för Skrivare 86
Ändra utskriftsalternativ Du kan ändra de detaljerade skrivardrivrutinsinställningarna för utskriftsdata som skickas från en programvara. Använd detta alternativ om du får utskriftsfel, t.ex. om en del av en bild saknas. 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Klicka på Utskriftsalternativ... (Print Options...) på fliken Utskriftsformat (Page Setup) Dialogrutan Utskriftsalternativ (Print Options) visas. Obs! • Andra funktioner är tillgängliga när XPS-skrivardrivrutinen används. 3.
Skapa en vanlig utskriftsprofil Du kan skapa den vanliga utskriftsprofilen i Vanliga inställningar (Commonly Used Settings) på fliken Snabbinstallation (Quick Setup). Du kan när som helst ta bort de utskriftsprofiler som inte används. Skapa en utskriftsprofil 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2.
Skriv in ett namn i fältet Namn (Name). Om det behövs klickar du på Alternativ... (Options...), gör inställningarna och klickar på OK. I dialogrutan Spara vanliga inställningar (Save Commonly Used Settings) klickar du på OK för att spara utskriftsinställningarna och återgå till fliken Snabbinstallation (Quick Setup). Namnet och ikonen visas i Vanliga inställningar (Commonly Used Settings). Viktigt! • Klicka på Alternativ... (Options...
Välj vilken FINE-kassett som ska användas Med den här funktionen kan du ange vilken FINE-kassett av de installerade bläckkassetterna som är lämpligast beroende på vad den ska användas till. 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Klicka på Utskriftsalternativ... (Print Options...) på fliken Utskriftsformat (Page Setup) Dialogrutan Utskriftsalternativ (Print Options) visas. 3.
Stänga av och sätta på Skrivare Med den här funktionen kan du stänga av och sätta på skrivaren från Canon IJ Printer Assistant Tool. Stäng av (Power Off) Med funktionen Stäng av (Power Off) stängs skrivaren av. Om du använder den här funktionen kommer du inte att kunna slå på skrivaren från Canon IJ Printer Assistant Tool. 1. Öppna Canon IJ Printer Assistant Tool 2. Utför Stäng av Klicka på Stäng av (Power Off). Klicka på OK när bekräftelsemeddelandet visas. Skrivaren stängs av.
Automatisk avstängning (Auto Power Off) Ange tid i listan. När denna tidsperiod har förflutit utan några åtgärder från skrivardrivrutinen eller skrivaren stängs skrivaren av automatiskt. 4. Verkställ inställningarna Klicka på OK. Klicka på OK när bekräftelsemeddelandet visas. Inställningen aktiveras efter det här. På samma sätt väljer du Avaktivera (Disable) i listan om du inte vill använda funktionen.
Ändra driftläge för Skrivare Växla mellan olika driftlägen för skrivaren vid behov. Anpassade inställningar (Custom Settings) 1. Öppna Canon IJ Printer Assistant Tool 2. Kontrollera att skrivaren är påslagen och klicka sedan på Anpassade inställningar (Custom Settings). Dialogrutan Anpassade inställningar (Custom Settings) visas.
Klicka på OK. När bekräftelsemeddelandet visas klickar du på OK. Skrivaren använder sig i fortsättningen av de ändrade inställningarna.
Ändra inställningar från Manöverpanelen Initiera skrivarens inställningar 95
Initiera skrivarens inställningar Du kan initiera skrivarinställningarna. Följ anvisningarna nedan om du vill initiera skrivarens inställningar. 1. Kontrollera att skrivaren är på. 2. Tryck på och håll ned FORTSÄTT (RESUME)-knappen och släpp den när Alarm-lampan har blinkat 13 gånger. Alla skrivarinställningar initieras. Efter återställning utför du konfiguration igen efter behov.
Specifikationer Allmänna specifikationer Utskriftsupplösning (dpi) 4 800* (horisontellt) x 1 200 (vertikalt) * Bläckdroppar kan placeras med en grad på minst 1/4800 tum. Gränssnitt USB-port: Hi-Speed USB * En dator som uppfyller Hi-Speed USB-standarden krävs. Eftersom Hi-Speed USB-gränssnittet är helt kompatibelt uppåt med USB 1.1 kan det användas vid USB 1.1.
Strömförbrukning Skriva ut: ca 10 W Standby (minimum): ca 1,2 W *1*2 AV: ca 0,2 W *1 *1 USB-anslutning till dator *2 Väntetiden för standby kan inte ändras. Yttermått Ca 426 (B) x 255 (D) x 131 (H) mm Ca 16,8 (B) x 10,1 (D) x 5,2 (H) tum * Med pappersstödet och utmatningsfacket inskjutna. Vikt Ca 2,5 kg (ca 5,5 pund) * Med FINE-bläckkassetter installerade.
• Windows: Vissa funktioner kanske inte är tillgängliga med Windows Media Center. • macOS: För macOS krävs en internetanslutning under programvaruinstallationen. Information i denna guide kan komma att ändras utan föregående meddelande.
Information om papper Medietyper som stöds Påfyllningsgräns Medietyper som inte stöds Hantera papper Området Skriv ut 100
Medietyper som stöds För bästa resultat bör du välja papper som utformats efter hur du vill skriva ut. Olika papper för dokument såväl som foton eller illustrationer finns tillgängliga från Canon. Använd om möjligt originalpapper från Canon för att skriva ut viktiga foton. Medietyper Originalpapper från Canon Obs! • Se varje produkts användningsinformation för varningar över om den icke-utskriftsvänliga sidan används. • Mer information om pappersstorlekar och medietyper finns på Canons webbsida.
Specialstorlekar: Specialstorlekar måste befinna sig inom följande gränser: • Minsta format: 89,0 x 127,0 mm (3,50 x 5,00 tum) • Största format: 215,9 x 676,0 mm (8,50 x 26,61 tum) Pappersvikt Du kan använda nedanstående pappersvikter.
Påfyllningsgräns Originalpapper från Canon Papper för utskrift av dokument: Medienamn Bakre fack Utmatningsfack Canon Red Label Superior Cirka 60 ark Cirka 10 ark Canon Océ Office Colour Paper Cirka 50 ark Cirka 10 ark Papper för utskrift av foton: Obs! • För bästa resultat vid upprepad utskrift tar du bort utskrivna ark från utmatningsfacket för att undvika fläckar och missfärgningar.
Medietyper som inte stöds Använd inte följande typer av papper. Om sådant papper används blir utskriftsresultatet dåligt och dessutom kan papper fastna och skrivaren fungera dåligt.
Hantera papper • Var försiktig så att du inte skrapar eller rispar ytan på papperet vid hanteringen. • Håll papperet så långt ut i kanterna som möjligt och undvik att vidröra utskriftsytan. Utskriftskvaliteten kan försämras om utskriftsytan vidrörs med svettiga eller oljiga händer. • Vidrör inte den utskrivna ytan förrän bläcket har torkat. Du bör även när bläcket har torkat försöka att vidröra den utskrivna ytan så lite som möjligt vid hanteringen av papperet.
Skriva ut Skriva ut från en dator Pappersinställningar 106
Skriva ut från en dator Skriva ut från programvara (Windows skrivardrivrutin) Skriva ut från programvara (macOS) Skriva ut med Canon-programvara 107
Skriva ut från programvara (Windows skrivardrivrutin) Konfiguration av Enkel utskrift Enkel Olika utskriftsmetoder Ändra utskriftskvalitet och bilddata Översikt över skrivardrivrutin Beskrivning av skrivardrivrutinen Uppdatera skrivardrivrutinen 108
Konfiguration av Enkel utskrift I det här avsnittet beskrivs de inställningar på fliken Snabbinstallation som används för grundläggande utskrift. 1. Kontrollera att skrivaren är påslagen 2. Fyll på papper i skrivaren 3. Öppna skrivardrivrutinens inställningsskärm 4. Välj inställningar som används ofta På fliken Snabbinstallation (Quick Setup) använder du Vanliga inställningar (Commonly Used Settings) för att välja bland fördefinierade utskriftsinställningar.
Viktigt! • Alternativen för utskriftskvalitet skiljer sig åt beroende på vilken utskriftsinställning du väljer. 6. Klicka på OK. Skrivaren skriver nu ut med de här inställningarna. Viktigt! • När du väljer Skriv alltid ut med aktuella inställningar (Always Print with Current Settings) sparas inställningarna på flikarna Snabbinstallation (Quick Setup), Huvudgrupp (Main) och Utskriftsformat (Page Setup). Inställningarna används sedan för efterföljande utskrifter.
• Om du vill registrera de aktuella inställningarna som ett nytt förval klickar du på Spara... (Save...) under Vanliga inställningar (Commonly Used Settings). Obs! • Om pappersstorleken i skrivardrivrutinen inte stämmer överens med den registrerade pappersstorleken i skrivaren kan ett fel inträffa. Anvisningar för vad du ska göra om ett fel inträffar finns i ”Pappersinställningar”.
Pappersinställningar i skrivardrivrutinen När du använder skrivaren bör du välja en medietyp som passar för utskriften så att du får bäst utskriftsresultat. Du kan använda följande medietyper i skrivaren.
Olika utskriftsmetoder Ange Pappersstorlek och Orientering Ställa in antal kopior och utskriftsordning Utför utskrift utan ram Utskrift med ändrad storlek Sidlayoututskrift Sida vid sida/affischutskrift Dubbelsidig utskrift Utskrift på vykort 113
Ange Pappersstorlek och Orientering Pappersstorlek och orientering bestäms huvudsakligen av programvaran. Om inställningarna för Pappersstorlek (Page Size) och Orientering (Orientation) på fliken Utskriftsformat (Page Setup) är desamma som inställningarna i programmet behöver du inte välja dem på fliken Utskriftsformat (Page Setup).
Utför utskrift utan ram Med funktionen för utskrift utan ram kan du skriva ut data utan marginal genom att förstora dokumentet så att det tar lite större plats än papperet. Vid vanlig utskrift skapas marginaler runt dokumentområdet. Om funktionen för utskrift utan ram används så skapas inga marginaler. Om du vill skriva ut ett dokument, t.ex. ett foto, utan marginaler väljer du Utskrift utan ram (Borderless Printing).
3. Kontrollera pappersstorleken Kontrollera listan Pappersstorlek (Page Size). Om du vill ändra inställningen väljer du en annan pappersstorlek i listan. I listan visas enbart de pappersstorlekar som kan användas för utskrift utan ram. 4. Justera förlängningsmåttet för papperet Justera vid behov förlängningsmåttet med skjutreglaget Förlängningsmått (Amount of Extension). Du kan öka eller minska förlängningsmåttet genom att dra skjutreglaget åt höger eller vänster.
Obs! • Om skjutreglaget Förlängningsmått (Amount of Extension) dras längst till vänster skrivs bilddata ut i full storlek. Om du anger den här inställningen när du skriver ut adressidan på ett vykort skrivs avsändarens postnummer ut i rätt position. • Om Förhandsgranska före utskrift (Preview before printing) har markerats på fliken Huvudgrupp (Main) kan du innan utskriften görs kontrollera om någon marginal kommer att finnas.
Utskrift med ändrad storlek 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Ställ in utskrift med ändrad storlek Välj Ändrad storlek (Scaled) i listan Sidlayout (Page Layout) på fliken Utskriftsformat (Page Setup). 3. Välj pappersstorlek för dokumentet Använd Pappersstorlek (Page Size) och välj den pappersstorlek som har angetts i programmet. 4.
• Ange skalfaktor Ange ett värde direkt i rutan Skala (Scaling). De aktuella inställningarna visas i förhandsgranskningsfönstret till vänster i skrivardrivrutinsfönstret. 5. Klicka på OK. När du startar utskriften skrivs dokumentet ut med den angivna skalan. Viktigt! • Om det program du använde för att skapa originaldokumentet kan skriva ut med ändrad storlek gör du inställningarna i programmet. Du behöver inte konfigurera samma inställning i skrivardrivrutinen.
Obs! • När du väljer Ändrad storlek (Scaled) ändras utskriftsytan.
Sidlayoututskrift Med funktionen för sidlayoututskrift kan du skriva ut flera sidor på ett pappersark. 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Ställ in sidlayoututskrift Välj Sidlayout (Page Layout) i listan Sidlayout (Page Layout) på fliken Utskriftsformat (Page Setup). De aktuella inställningarna visas i förhandsgranskningsfönstret till vänster i skrivardrivrutinsfönstret. 3.
Sidlayout (Page Layout) Du ändrar det antal sidor som ska skrivas ut på ett ark papper genom att välja ett värde i listan. Utskriftsordning (Page Order) Om du vill ändra utskriftsordningen väljer du en placeringsmetod i listan. Kantlinjer (Page Border) Om du vill lägga till en kantlinje runt varje dokumentsida markerar du denna kryssruta. 5. Gör dina inställningar Klicka på OK på fliken Utskriftsformat (Page Setup).
Sida vid sida/affischutskrift Med funktionen Sida vid sida/affischutskrift kan du förstora bilddata, dela upp på flera sidor och skriva ut sidorna på olika pappersark. Du kan även klistra ihop sidor och skapa en större trycksak, t.ex. en affisch. Ställa in sida vid sida/affischutskrift 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Ställa in sida vid sida/affischutskrift Välj Sida vid sida/affisch (Tiling/Poster) i listan Sidlayout (Page Layout) på fliken Utskriftsformat (Page Setup).
4. Ange antalet bilddelar och sidor som ska skrivas ut Om så krävs klickar du på Ange... (Specify...), anger följande inställningar i dialogrutan Sida vid sida/ affischutskrift (Tiling/Poster Printing) och klickar på OK. Bilddelar (Image Divisions) Välj antalet indelningar (vertikalt x horisontellt). När antalet indelningar ökar, ökar även antalet ark som används för att skriva ut. Om du klistrar ihop sidor för att skapa en affisch och ökar antalet indelningar kan du skapa en större affisch.
Obs! • Om du klickar på en borttagen sida visas den igen. • Högerklicka på förhandsgranskningen för att välja Skriv ut alla sidor (Print all pages) eller Ta bort alla sidor (Delete all pages). 2. Gör dina inställningar När du är färdig klickar du på OK. När du startar utskriften skrivs endast de angivna sidorna ut. Viktigt! • Eftersom sida vid sida/affischutskrift förstorar dokumentet vid utskriften kan utskriftsresultatet få en låg upplösning.
Dubbelsidig utskrift Du kan även ställa in dubbelsidig utskrift i Ytterligare funktioner (Additional Features) på fliken Snabbinstallation (Quick Setup). 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Ställ in dubbelsidig utskrift Markera kryssrutan Dubbelsidig utskrift (Manuell) (Duplex Printing (Manual)) på fliken Utskriftsformat (Page Setup). 3.
5. Ange marginalens bredd Om det behövs kan du klicka på Ange marginal... (Specify Margin...) och ställa in bredden på marginalen och sedan klicka på OK. 6. Gör dina inställningar Klicka på OK på fliken Utskriftsformat (Page Setup). När du startar utskriften skrivs först den ena sidan av dokumentet ut. När den första sidan har skrivits ut lägger du i papperet i skrivaren igen enligt det meddelande som visas. Klicka sedan på Starta utskriften (Start Printing) för att skriva ut baksidan.
Utskrift på vykort 1. Fyll på vykort i skrivaren 2. Öppna fönstret Egenskaper för skrivardrivrutinen 3. Välj vanliga inställningar Öppna fliken Snabbinstallation (Quick Setup), och för Vanliga inställningar (Commonly Used Settings) väljer du Standard. 4. Välj typ av media För Medietyp (Media Type) väljer du Ink Jet Hagaki (A), Ink Jet Hagaki, Hagaki K (A), Hagaki K, Hagaki (A) eller Hagaki. Viktigt! • Den här skrivaren kan inte skriva ut på vykort med påklistrade foton eller etiketter.
Översikt över skrivardrivrutin Canon IJ-skrivardrivrutin Öppna skrivardrivrutinens inställningsskärm Canon IJ-statusövervakare Kontrollera bläckstatusen från datorn Anvisningar för användning (skrivardrivrutin) 131
Canon IJ-skrivardrivrutin Skrivardrivrutinen Canon IJ (endast kallad skrivardrivrutin nedan) är programvara som du installerar på datorn så att den kan kommunicera med skrivaren. Skrivardrivrutinen konverterar de utskriftsdata som skapats i programmet till data som kan hanteras i skrivaren och skickar sedan dessa data till skrivaren. Eftersom olika skrivare har stöd för olika dataformat behöver du en skrivardrivrutin som stöder din skrivare.
Öppna skrivardrivrutinens inställningsskärm Du kan visa skrivardrivrutinens inställningsskärm via din programvara eller genom att klicka på ikonen för skrivaren. Visa skrivardrivrutinens inställningsskärm via din programvara Gör så här för att konfigurera utskriftsinställningarna när du skriver ut. 1. Välj utskriftskommando från programvaran Kommandot Skriv ut (Print) finns vanligtvis i menyn Arkiv (File). 2.
Canon IJ-statusövervakare Canon IJ-statusövervakare är ett program som visar skrivarens status och utskriftens förlopp. Du får information om skrivarens status med hjälp av bilder, ikoner och meddelanden. Starta Canon IJ-statusövervakare Canon IJ-statusövervakare startas automatiskt när utskriftsdata skickas till skrivaren. När Canon IJstatusövervakare har startats visas den som en knapp i aktivitetsfältet. Klicka på knappen för Statusövervakaren i aktivitetsfältet. Canon IJ-statusövervakare visas.
Följ anvisningarna och vidta lämplig åtgärd.
Kontrollera bläckstatusen från datorn Du kan kontrollera kvarvarande bläcknivå och typer av FINE-kassetter för din modell. 1. Öppna fönstret Egenskaper för skrivardrivrutinen 2. Starta Canon IJ-statusövervakare Klicka på Visa skrivarstatus (View Printer Status) på fliken Underhåll (Maintenance). 3. Visa Uppskattade bläcknivåer (Estimated ink levels) Bläckstatusen visas som en bild.
Anvisningar för användning (skrivardrivrutin) För den här skrivardrivrutinen gäller följande begränsningar. Tänk på dessa punkter när du använder skrivardrivrutinen. Begränsningar hos skrivardrivrutinen • Med vissa program fungerar inte inställningen för Kopior (Copies) som görs på fliken Utskriftsformat (Page Setup) i skrivardrivrutinen. Använd i så fall inställningen för antal kopior i dialogrutan Skriv ut (Print) i programmet.
◦ När Anpassa till sida (Fit-to-Page), Ändrad storlek (Scaled) eller Sidlayout (Page Layout) används under Sidlayout (Page Layout) på fliken Utskriftsformat (Page Setup) i skrivardrivrutinen kan det hända att dokumentet inte skrivs ut som vanligt i vissa Word-versioner. ◦ När Pappersstorlek (Page Size) i Word är inställt på "XXX Förstora/Förminska" kan det hända att dokumentet inte skrivs ut som vanligt i vissa Word-versioner. Gör så här om det händer. 1. Öppna dialogrutan Skriv ut (Print) i Word. 2.
Beskrivning av skrivardrivrutinen Beskrivning av fliken Snabbinstallation Beskrivning av fliken Huvudgrupp Beskrivning av fliken Utskriftsformat Beskrivning av fliken Underhåll Beskrivning av Canon IJ-statusövervakare 139
Beskrivning av fliken Snabbinstallation På fliken Snabbinstallation (Quick Setup) kan du skapa vanliga utskriftsinställningar. När du väljer en skapad inställning växlar skrivaren automatiskt till de förinställda alternativen. Vanliga inställningar (Commonly Used Settings) Namnen och ikonerna för utskriftsprofiler som du använder ofta kan sparas. När du väljer en utskriftsprofil baserat på dokumentets syfte används inställningar som matchar syftet.
Sparläge för papper (Paper Saving) Välj den här inställningen för att spara papper när du skriver ut ett allmänt dokument. Kryssrutorna Utskrift 2 på 1 (2-on-1 Printing) och Dubbelsidig utskrift (Manuell) (Duplex Printing (Manual)) markeras automatiskt. Om Pappersstorlek (Page Size), Orientering (Orientation) och Kopior (Copies) har ställts in i ett program har dessa inställningar prioritet.
Utskrift 2 på 1 (2-on-1 Printing) Skriver ut två dokumentsidor, sida vid sida, på ett enda pappersark. Om du vill ändra sidornas ordningsföljd klickar du på fliken Utskriftsformat (Page Setup) och väljer Sidlayout (Page Layout) för Sidlayout (Page Layout), och klicka sedan på Ange... (Specify...). Sedan när Dialogrutan Sidlayoututskrift visas, anger du Utskriftsordning (Page Order). Utskrift 4 på 1 (4-on-1 Printing) Skriver ut fyra dokumentsidor, sida vid sida, på ett enda pappersark.
Ytterligare funktioner (Additional Features) kan du ange pappersstorleken manuellt under Pappersstorlek (Page Size) på fliken Utskriftsformat (Page Setup). Om du väljer en pappersstorlek som är mindre än Pappersstorlek (Page Size) förminskas dokumentstorleken. Om du väljer en pappersstorlek som är större, förstoras dokumentstorleken. Om du väljer även Anpassad... (Custom...), öppnas Dialogrutan Anpassad pappersstorlek där du har möjlighet att ange vertikala och horisontella dimensioner för pappersstorleken.
Skriv alltid ut med aktuella inställningar (Always Print with Current Settings) Skriver ut dokument med de aktuella inställningarna från och med nästa utskriftsjobb. När du väljer den här funktionen och sedan stänger fönstret Egenskaper för skrivardrivrutinen sparas informationen som du angav på flikarna Snabbinstallation (Quick Setup), Huvudgrupp (Main) och Utskriftsformat (Page Setup), och inställningarna kan användas från och med nästa utskriftsjobb.
Spara inställning för orientering (Save the orientation setting) Sparar inställningen Orientering (Orientation) i utskriftsprofilen under Vanliga inställningar (Commonly Used Settings). Markera den här kryssrutan om du vill använda den sparade utskriftsorienteringen när utskriftsprofilen väljs. Om du avmarkerar den här kryssrutan sparas inte utskriftsorienteringen och därmed används inte inställningen Orientering (Orientation) när utskriftsprofilen väljs.
Beskrivning av fliken Huvudgrupp På fliken Huvudgrupp (Main) kan du göra grundläggande utskriftsinställningar i enlighet med vald medietyp. Såvida inte särskilda utskriftsfunktioner behövs kan normala utskrifter utföras när värdena på den här fliken har ställts in. Förhandsgranskning av inställningar Bilden av papperet visar hur originalet kommer att skrivas ut på ett pappersark. Du kan kontrollera en översiktsbild av layouten. Medietyp (Media Type) Anger typ av utskriftspapper.
Utkast (Draft) Den här inställningen passar bra för testutskrifter. Anpassad (Custom) Välj detta när du vill ställa in utskriftskvaliteten enskilt. Ställ in... (Set...) Välj Anpassad (Custom) under Utskriftskvalitet (Print Quality) för att aktivera den här knappen. Öppnar dialogrutan Anpassad. Där kan du ställa in utskriftskvaliteten enskilt. Färg/intensitet (Color/Intensity) Anger färgjusteringsmetod.
Kvalitet Du kan använda skjutreglaget för att justera utskriftskvaliteten. Viktigt! • Vissa utskriftskvalitetsnivåer kan inte väljas på grund av inställningarna i Medietyp (Media Type). Obs! • Utskriftskvaliteterna Hög (High), Standard eller Utkast (Draft) är kopplade till skjutreglaget. På så sätt visas motsvarande utskriftskvalitet och värde till vänster när du drar i skjutreglaget.
intensiteten. Du kan också ange ett värde länkat till skjutreglaget. Ange ett värde mellan –50 och 50. Kontrast (Contrast) Justerar konstrasten mellan ljust och mörkt i den bild som ska skrivas ut. Om du drar reglaget åt höger ökar kontrasten och om du drar reglaget åt vänster minskar kontrasten. Du kan också ange ett värde länkat till skjutreglaget. Ange ett värde mellan –50 och 50.
• Förhandsgranskningen på fliken Huvudgrupp (Main) visar en bild där du kan kontrollera den övergripande layouten.
Närliggande information Ange nivå för Utskriftskvalitet (Anpassad) Justera färgbalans Justera ljusstyrka Justera intensitet Justera kontrast Justera färgbalans med ett färgmönster (skrivardrivrutin) Justera intensitet/kontrast med ett färgmönster (skrivardrivrutin) Ange färgkorrigering Justera färger med skrivardrivrutinen Skriva ut med ICC-profiler Skriva ut färgdokument i svartvitt Visa utskriftsresultat före utskrift 151
Beskrivning av fliken Utskriftsformat På fliken Utskriftsformat (Page Setup) kan du bestämma hur ett dokument ska arrangeras på papperet. På den här fliken kan du även ange antal kopior och utskriftsordningen. Om det program du använde för att skapa dokumentet har en liknande funktion ska du göra inställningarna med det programmet. Förhandsgranskning av inställningar Bilden av papperet visar hur originalet kommer att skrivas ut på ett pappersark. Du kan kontrollera en översiktsbild av layouten.
grader åt vänster när orienteringen är [Liggande] (Rotate 90 degrees left when orientation is [Landscape]). Rotera 180 grader (Rotate 180 degrees) Skriver ut dokumentet genom att rotera det 180 grader mot pappersutmatningsriktningen. Utskriftsytans bredd och förlängningsmåttet som har konfigurerats i andra program kastas om vertikalt och horisontellt. Skrivarens pappersstorlek (Printer Paper Size) Väljer den pappersstorlek som du har fyllt på i skrivaren.
Ändrad storlek (Scaled) Dokument kan förstoras eller förminskas inför utskrift. Ange storleken i Skrivarens pappersstorlek (Printer Paper Size) eller ange en skala i rutan Skala (Scaling). Skala (Scaling) Anger en skala för förstoring eller förminskning av det dokument som du vill skriva ut. Sidlayout (Page Layout) Flera dokumentsidor kan skrivas ut på ett enda pappersark. Ange... (Specify...) Öppnar Dialogrutan Sidlayoututskrift.
Skriv ut från sista sidan (Print from Last Page) Markera den här kryssrutan om du vill skriva ut från sista sidan först. Om du gör det behöver du inte sortera om sidorna i rätt ordning när du har skrivit ut dem. Avmarkera den här kryssrutan om du vill skriva ut dokumentet i vanlig ordning, dvs. från första sidan först. Sortera (Collate) Markera den här kryssrutan om du vill samla ihop sidorna för varje exemplar av utskriften när du skriver ut flera kopior samtidigt.
Inställningarna som anges i den här dialogrutan kan bekräftas i förhandsgranskningen av skrivardrivrutinens inställningar. Förhandsgranskningsikonen Visar de inställningar som har gjorts i dialogrutan Sidlayoututskrift (Page Layout Printing). Du kan kontrollera hur utskriftsresultatet kommer att bli innan du skriver ut information. Sidlayout (Page Layout) Anger hur många dokumentsidor som ska skrivas ut på ett ark.
Obs! • Om några av sidorna har skrivits ut med dålig kvalitet kan du ange vilka sidor som inte behöver skrivas ut igen genom att klicka på dem i förhandsgranskningen på fliken Utskriftsformat (Page Setup). Då skrivs endast de sidor som visas på skärmen ut. Dialogrutan Utskrift av broschyrer (Booklet Printing) I den här dialogrutan kan du ange hur dokumentet ska häftas ihop som en broschyr. Utskrift på endast en sida och utskrift av kantlinjer kan också ställas in i den här dialogrutan.
utskriften ta längre tid än normalt. Om dessa problem uppstår kan de eventuellt åtgärdas genom att du markerar den här kryssrutan. Viktigt! • I normala fall ska den här kryssrutan vara avmarkerad. • Den här funktionen fungerar inte när ICM har valts under Färgkorrigering (Color Correction) på fliken Matchning (Matching) i dialogrutan Manuell färgjustering (Manual Color Adjustment).
Viktigt! • I normala fall ska den här kryssrutan vara avmarkerad. Skala bilder med hjälp av "närmaste granne"-interpolering (Scale images using nearest-neighbor interpolation) När en bild ska förstoras eller förminskas vid utskrift använder skrivaren en enkel interpoleringsprocess för att förstora eller förminska bilden. Om bilddata i ett utskrivet dokument skrivs ut suddigt kan resultatet förbättras om du markerar den här kryssrutan. Viktigt! • I normala fall ska den här kryssrutan vara avmarkerad.
• Utan ram (Borderless) har valts i listan Sidlayout (Page Layout) på fliken Utskriftsformat (Page Setup) • Ta inte bort en FINE-kassett som inte används. Det går inte att skriva ut om någon av FINEkassetterna har tagits bort. Dialogrutan Stämpel/bakgrund (Stamp/Background) (Stämpel... (Stamp...)) Med dialogrutan Stämpel/bakgrund (Stamp/Background) (Stämpel... (Stamp...)) kan du skriva ut en stämpeltext och/eller en bakgrundsbild över eller bakom dokumentsidorna.
Bakgrund (Background) Med funktionen för bakgrundsutskrift kan du skriva ut en illustration eller ett liknande objekt (bitmapp) under dokumenttexten. Markera den här kryssrutan om du vill skriva ut en bakgrund och välj ett namn i listan. Välj bakgrund... (Select Background...) Öppnar dialogrutan Bakgrundsinställningar. Du kan definiera en bitmappfil som bakgrund, och ändra den valda bakgrundens layoutmetod och intensitet.
Ram (Outline) Anger att det ska skrivas ut en ram runt stämpeltextsträngen. Om en stor teckensnittstorlek har valts under Storlek (Size) kan tecknen eventuellt sticka ut utanför stämpelramen. Färg (Color)/Välj färg... (Select Color...) Visar stämpelns aktuella färg. Om du vill välja en annan färg klickar du på Välj färg... (Select Color...) för att öppna dialogrutan Färg (Color) och välj eller skapa en färg som du vill använda som stämpel.
Obs! • Klicka på Standardvärden (Defaults) för att ställa in stämpelpositionen på Centrerat (Center) och orienteringen på 0. Fliken Spara inställningar (Save settings) På fliken Spara inställningar (Save settings) kan du skapa en ny stämpel eller ta bort stämplar som du inte längre använder. Rubrik (Title) Ange namnet för att spara stämpeln som du har skapat. Upp till 64 tecken kan anges. Obs! • Det går inte att ange blanksteg, tabbar och radbrytningar i början eller slutet av en rubrik.
intensiteten. Om bakgrundsbilden ska skrivas ut med bitmappens ursprungliga intensitet drar du skjutreglaget längst till höger. Obs! • Den här funktionen är inte alltid tillgänglig beroende på vilken skrivardrivrutin och skrivarmiljö du använder. • Klicka på Standardvärden (Defaults) för att ställa in Arkiv (File) på blank, Layoutmetod (Layout Method) på Fyll sidan (Fill page) och dra Intensitet (Intensity)-reglaget till mitten.
Beskrivning av fliken Underhåll På fliken Underhåll (Maintenance) kan du starta Canon IJ Printer Assistant Tool eller kontrollera status för skrivaren. Underhåll och inställningar (Maintenance and Preferences) Canon IJ Printer Assistant Tool startas. Du kan utföra underhåll på skrivaren och ändra inställningarna för skrivaren. Visa utskriftshistorik (View Print History) Den här funktionen startar Canon IJ XPS-förhandsgranskningen och visar utskriftshistoriken.
Dialogrutan Om (About) När du klickar på Om (About) visas dialogrutan Om (About). Den här dialogrutan visar skrivardrivrutinens version, upphovsrättsmeddelande och modullista. Du kan välja vilket språk som används och ändra det visade språket i inställningsfönstret. Moduler Visar en lista över skrivardrivrutinsmodulerna. Språk (Language) Anger vilket språk du vill använda i fönstret Egenskaper för skrivardrivrutinen.
Beskrivning av Canon IJ-statusövervakare Canon IJ-statusövervakaren visar statusen för skrivaren och utskriftsförloppet. Skrivarens status visas via bilder, ikoner och meddelanden i statusövervakaren. Funktioner i Canon IJ-statusövervakaren Canon IJ-statusövervakaren innehåller följande funktioner: Visar skrivarens status på skärmen Statusövervakaren visar skrivarens status i realtid. Du kan kontrollera utskriftsförloppet för varje dokument som ska skrivas ut (utskriftsjobb).
FINE-kassetter Om en varning om låg bläcknivå eller ett fel gällande tom bläckkassett inträffar visar statusövervakaren en ikon. Statusövervakaren använder även bilder för att visa uppskattade bläcknivåer i FINE-kassetterna. Flytta markören till bilden för att kontrollera detaljerad information som återstående bläcknivåer och namnen på de FINE-kassetter som kan användas i skrivaren. Färgerna kalibreras för att matcha färgen med minst bläck kvar, och sedan visas alla färgerna på samma nivå.
Starta när Windows startas (Start when Windows is Started) Startar Canon IJ-statusövervakaren automatiskt när du startar Windows. Menyn Hjälp (Help) Välj den här menyn för att visa hjälpinformation om Canon IJ-statusövervakaren, t.ex. version och upphovsrättsmeddelande.
Installera skrivardrivrutinen Du kan gå till vår webbplats på Internet och hämta senaste skrivardrivrutin och XPS-skrivardrivrutin för din modell. 1. Stäng av skrivaren 2. Starta installationsprogrammet Dubbelklicka på den hämtade filens ikon. Installationsprogrammet startar. Viktigt! • En dialogruta för bekräftelse/varning visas eventuellt under start, installation eller avinstallation av programvara. Denna dialogruta visas när administratörsrättigheter krävs för att utföra en åtgärd.
Ta bort skrivardrivrutiner som du inte längre behöver Innan du installerar skrivardrivrutinen 171
Skriva ut med Canon-programvara Handbok för My Image Garden Handbok för Quick Menu 172
Pappersinställningar Genom att registrera pappersstorleken på papperet som finns i det bakre facket kan du förhindra att skrivaren skriver ut felaktiga utskrifter genom att blinka med Alarm-lampan och Papper (Paper)-lampan innan utskriften startar när det påfyllda papperets storlek inte stämmer överens med utskriftsinställningarna. Medietypen är inställd baserat på vilken pappersstorlek som registrerats i skrivaren.
När du börjar skriva ut blinkar Alarm-lampan och Papper (Paper)-lampan samtidigt för att indikera inställningen för pappersstorlek för utskrift. Välj någon av användningarna nedan. • Utskrift på det papper som är fyllt på i det bakre facket Du skriver ut på det papper som har fyllts på utan att ändra inställningen för pappersstorlek för utskrift. Tryck på FORTSÄTT (RESUME).
Om du vill ändra inställningen: Ändra driftläge för Skrivare Viktigt! • När Alarm-lampan som blinkar för att förhindrar felaktiga utskrifter är inaktiverad: Skrivaren börjar skriva ut trots att inställningen för papperstorlek för utskriften och den pappersstorlek som registrerats i skrivaren är olika.
Vanliga frågor Skriv ut Utskriften startar inte Papperet är tomt/Utskriften är suddig/Färgerna är felaktiga/Vita ränder uppstår Utskriftsresultaten är otillfredsställande Lista över supportkoder för fel (papperet fastnar) Det går inte att installera skrivardrivrutinen (Windows) Installation Ett fel inträffar Meddelande (supportkod) visas Fel Exempel på problem Skrivaren fungerar inte Skrivaren startar inte Strömmen stängs av av sig själv Problem med USB-anslutning Det går inte att kommunicera med skri
Problem med installation och hämtning Fel och meddelanden Om du inte kan lösa ett problem 177
Utskriftsproblem Utskriften startar inte Det kommer inte ut något bläck Problem med pappersmatningen/”Slut på papper”-fel Utskriftsresultaten är otillfredsställande 178
Utskriften startar inte Kontroll1 Kontrollera att skrivaren är på. Om den inte är det ska du se till att skrivaren är ansluten och trycka på knappen PÅ/Stopp (ON/Stop) för att sätta på den. PÅ (ON)-lampan blinkar medan skrivaren startas. Vänta tills lampan PÅ (ON) slutar att blinka och i stället lyser med fast sken. Obs! • Om du skriver ut stora mängder data, som foton eller grafik, tar det längre tid att starta utskriften.
Kontrollera att "Canon XXX series" (där "XXX" är namnet på skrivaren) har markerats i utskriftsdialogrutan. Obs! • Om du vill göra skrivaren till standardskrivare väljer du Använd som standardskrivare (Set as Default Printer). • För macOS: Kontrollera att skrivarens namn är markerat på Skrivaren (Printer) i utskriftsdialogrutan. Obs! • Om du vill göra skrivaren till standardskrivare markerar du skrivaren som Standardskrivare (Default printer).
Det kommer inte ut något bläck Kontroll1 Kontrollera uppskattade bläcknivåer. • För Windows: Kontrollera bläckstatusen från datorn (Windows) • För macOS: Kontrollera bläckstatusen från datorn (macOS) Byt ut en tom FINE-kassett mot en ny. Kontroll2 Har FINE-kassetten installerats ordentligt? Om FINE-kassetten inte är installerad korrekt kommer inte bläcket att matas ut på rätt sätt. Skjut in utmatningsfackets förlängningsdel och utmatningsfacket, öppna luckan och ta sedan bort FINEkassetterna.
När du har rengjort skrivhuvudet skriver du ut ett testmönster för munstycken och undersöker mönstret. • Om problemet inte är löst efter att du har rengjort skrivhuvudet två gånger: Djuprengör skrivhuvudet. Om problemet inte är löst efter en djuprengöring av skrivhuvudet stänger du av skrivaren, väntar 24 timmar och genomför en djuprengöring av skrivhuvudet igen. • Om problemet inte är löst efter att du har genomfört en djuprengöring av skrivhuvudet två gånger: Bläcket kan ha tagit slut.
Problem med pappersmatningen/”Slut på papper”-fel Kontroll1 Kontrollera att det finns papper i skrivaren. Fylla på papper Kontroll2 Tänk på följande när du fyller på papper. • Om du fyller på två eller fler pappersark bör du jämna till papperskanterna innan du lägger i papperet. • Om du fyller på två eller fler ark bör du kontrollera att pappersbunten inte överskrider påfyllningsgränsen.
Kontroll6 Rengör pappersmatningshjulet. Rengöra pappersmatningshjul Om åtgärderna ovan inte löser problemet kontaktar du närmaste Canon-servicecenter för att begära service.
Utskriftsresultaten är otillfredsställande Om utskriftsresultaten inte är tillfredsställande, till exempel på grund av vita ränder, sneda linjer eller ojämna färger, kontrollerar du först inställningarna för papper och utskriftskvalitet. Kontroll1 Matchar inställningarna för pappersstorlek och medietyp den typ av och storleken på papper som har fyllts på? Om dessa inställningar inte matchar varandra går det inte att få ett bra resultat.
Om det utskrivna papperet har missfärgats Färger kan blekna efter en tid om det utskrivna papperet lämnas under en längre tid. Efter utskriften ska du torka papperet tillräckligt, undvika höga temperaturer, hög luftfuktighet och direkt solljus och lagra eller visa inomhus i rumstemperatur och normal luftfuktighet. Undvik direkt exponering av luft, vi rekommenderar att du förvarar papperet i ett album, en plastmapp, en fotoram etc.
Papperet är tomt/Utskriften är suddig/Färgerna är felaktiga/Vita ränder uppstår Utskriften är suddig Färgerna är felaktiga 187
Vita ränder uppstår Kontroll1 Kontrollera pappers- och utskriftskvalitetsinställningarna. Utskriftsresultaten är otillfredsställande Kontroll2 Är skrivhuvudmunstyckena igensatta? Skriv ut testmönstret för munstyckena för att kontrollera om bläcket sprutar ut på rätt sätt från munstyckena på skrivhuvudet. Mer information om utskrift av testmönster för bläckmunstycken, rengöring av skrivhuvuden och djuprengöring av skrivhuvuden finns i Om utskriften är svag eller ojämn.
Om du skriver ut på fel sida av sådant papper kan det leda till otydliga utskrifter eller sämre utskriftskvalitet. Fyll på papper med utskriftssidan vänd uppåt. Se instruktionshandboken som medföljer papperet om information om utskriftssidan. Kontroll5 Har FINE-kassetten installerats ordentligt? Om FINE-kassetten inte är installerad korrekt kommer inte bläcket att matas ut på rätt sätt. Skjut in utmatningsfackets förlängningsdel och utmatningsfacket, öppna luckan och ta sedan bort FINEkassetterna.
Färgerna är otydliga Kontroll1 Är skrivhuvudmunstyckena igensatta? Skriv ut testmönstret för munstyckena för att kontrollera om bläcket sprutar ut på rätt sätt från munstyckena på skrivhuvudet. Mer information om utskrift av testmönster för bläckmunstycken, rengöring av skrivhuvuden och djuprengöring av skrivhuvuden finns i Om utskriften är svag eller ojämn.
När du har kontrollerat att FINE-kassetten har installerats ordentligt stänger du luckan. Obs! • Det är inte säkert att de utskrivna färgerna stämmer överens med färgerna på bildskärmen eftersom olika metoder används för att producera färgerna. Färginställningar och miljöskillnader kan också påverka hur färgerna framställs på skärmen. Färgerna i en utskrift kan därför skilja sig från de färger som visas på datorskärmen.
Linjerna är sneda Kontroll1 Kontrollera pappers- och utskriftskvalitetsinställningarna. Utskriftsresultaten är otillfredsställande Kontroll2 Utför en justering av skrivhuvudet. Om raka linjer blir sneda vid utskrift eller om utskriften brister i något annat avseende bör skrivhuvudet justeras. • För Windows: Justera Skrivhuvud via datorn (Windows) • För macOS: Justera Skrivhuvud via datorn (macOS) Kontroll3 Öka utskriftskvaliteten och försök att skriva ut igen.
Papperet är fläckigt / Den utskrivna ytan är repig Papperet är fläckigt Fläckiga kanter Fläckig yta Den utskrivna ytan är repig Kontroll1 Kontrollera pappers- och utskriftskvalitetsinställningarna. Utskriftsresultaten är otillfredsställande Kontroll2 Kontrollera papperstypen. Kontrollera att du använder rätt papper för det du ska skriva ut. Medietyper som stöds Kontroll3 Släta ut papperet innan du lägger i det.
1. Rulla papperet i motsatt riktning från hur det är rullat – se nedan. 2. Kontrollera att papperet är plant. Vi rekommenderar att du skriver ut på sådana här pappersark ett i taget. Obs! • Beroende på papperstypen kan det hända att papperet bli fläckigt eller inte matas korrekt även om det inte är böjt inåt. Följ anvisningarna nedan för att släta ut papperet så att det inte överstiger 3 mm/0,1 tum (B) i höjdled före utskrift. Detta kan förbättra utskriftsresultatet.
Om du skriver ut med hög intensitet på vanligt papper kan papperet suga åt sig för mycket bläck och bli vågigt, vilket orsakar pappersavstrykning. Kontrollera intensitetsinställningen via skrivardrivrutinen. Justera intensitet Skriv inte ut utanför den rekommenderade utskriftsytan. Kontroll6 Om du skriver ut utanför papperets rekommenderade utskriftsyta kan bläck fläcka ner papperets nederkant. Ändra storleken på dokumentet med programvara.
Det går inte att slutföra utskriften Kontroll1 Markera inställningen som gör att utskriftsdata inte komprimeras (Windows). Om du markerar inställningen som gör att utskriftsdata inte komprimeras med hjälp av ett program kan utskriftsresultatet bli bättre. Klicka på Utskriftsalternativ (Print Options) på fliken Utskriftsformat (Page Setup) i skrivardrivrutinen. Markera kryssrutan Tillåt inte att program komprimerar utskriftsdata (Do not allow application software to compress print data) och klicka på OK.
Ofullständiga linjer eller linjer som saknas (Windows) Kontroll1 Använder du funktionen för sidlayoututskrift eller bindningsmarginal? När funktionen för sidlayoututskrift eller bindningsmarginal används är det inte säkert att tunna linjer skrivs ut. Pröva med att göra linjerna tjockare i dokumentet. Kontroll2 Är utskriftsdatan extremt stor? Om utskriften är stor kan delar av bilden beskäras, och utskriftsfel kan förekomma.
Ofullständiga bilder eller bilder som saknas (Windows) Kontroll1 Markera inställningen som gör att utskriftsdata inte komprimeras. Om du markerar inställningen som gör att utskriftsdata inte komprimeras med hjälp av ett program kan utskriftsresultatet bli bättre. Klicka på Utskriftsalternativ (Print Options) på fliken Utskriftsformat (Page Setup) i skrivardrivrutinen.
Bläckfläckar / Böjt papper Bläckfläckar Böjt papper Kontroll1 Kontrollera pappers- och utskriftskvalitetsinställningarna. Utskriftsresultaten är otillfredsställande Om intensiteten är hög minskar du intensitetsinställningen och försöker sedan skriva ut igen. (Windows) Kontroll2 Om du skriver ut med hög intensitet på vanligt papper kan papperet suga åt sig för mycket bläck och bli vågigt, vilket orsakar pappersavstrykning. Kontrollera intensitetsinställningen via skrivardrivrutinen.
Papperets baksida är fläckig Kontroll1 Kontrollera pappers- och utskriftskvalitetsinställningarna. Utskriftsresultaten är otillfredsställande Kontroll2 Rengör insidan av skrivaren med funktionen för rengöring av bottenplattan. Rengöra inuti skrivaren (rengöra bottenplattan) Obs! • Vid utskrift utan ram, dubbelsidig utskrift eller för många utskrifter kan bläck fläcka ner insidan av skrivaren.
Ojämna eller randiga färger Ojämna färger Randiga färger Kontroll1 Kontrollera pappers- och utskriftskvalitetsinställningarna. Utskriftsresultaten är otillfredsställande Kontroll2 Är skrivhuvudmunstyckena igensatta? Skriv ut testmönstret för munstyckena för att kontrollera om bläcket sprutar ut på rätt sätt från munstyckena på skrivhuvudet.
Djuprengör skrivhuvudet. Om problemet inte är löst efter en djuprengöring av skrivhuvudet stänger du av skrivaren, väntar 24 timmar och genomför en djuprengöring av skrivhuvudet igen. • Om problemet inte är löst efter att du har genomfört en djuprengöring av skrivhuvudet två gånger: Bläcket kan ha tagit slut. Byt ut FINE-kassetten. Kontroll3 Utför en justering av skrivhuvudet. Om raka linjer blir sneda vid utskrift eller om utskriften brister i något annat avseende bör skrivhuvudet justeras.
Utskriften avbryts Kontroll1 Finns det papper i skrivaren? Kontrollera att det finns papper i skrivaren. Fyll på papper vid behov. Kontroll2 Innehåller dokumenten som ska skrivas ut många foton eller illustrationer? Det tar tid för skrivaren och datorn att bearbeta stora mängder utskriftsdata som foton eller grafik, så det kan verka som om skrivaren inte fungerar.
Det går inte att skriva ut med AirPrint Kontroll1 Kontrollera att skrivaren är på. Om skrivaren är på stänger du av den och sätter på den igen och kontrollerar sedan om problemet är löst. Kontroll2 Kontrollera att skrivaren är registrerad till datorn. Kontroll3 Se till att det finns tillräckligt med papper och bläck i skrivaren. Kontroll4 Se till att det inte visas några felmeddelanden på datorn.
Mekaniska problem Skrivaren startar inte Strömmen stängs av av sig själv Problem med USB-anslutning Det går inte att kommunicera med skrivaren via USB 205
Skrivaren startar inte Kontroll1 Tryck på knappen PÅ/Stopp (ON/Stop). Kontroll2 Kontrollera att strömkontakten är ordentligt ansluten till skrivaren och sätt sedan på den igen. Kontroll3 Koppla ur skrivaren och lämna den så i minst 2 minuter. Koppla sedan in den igen och sätt på den. Om detta inte löser problemet kontaktar du närmaste Canon-servicecenter för att begära service.
Strömmen stängs av av sig själv Kontroll Om skrivaren stängs av automatiskt efter en viss tid ska du inaktivera inställningen. Om du har ställt in att skrivaren ska stängas av automatiskt efter en viss tid stängs strömmen av när tiden har löpt ut. Inaktivera inställningen från datorn. • För Windows: Använd Canon IJ Printer Assistant Tool för att inaktivera inställningen genom att följa anvisningarna nedan. 1. Öppna Canon IJ Printer Assistant Tool. Beskrivning av fliken Underhåll 2.
Problem med USB-anslutning Det går långsamt att skriva ut/Hi-Speed USB-anslutningen fungerar inte/Meddelandet "Den här enheten kan fungera snabbare (This device can perform faster)" visas (Windows) Om systemmiljön inte har stöd för Hi-Speed USB arbetar skrivaren i den långsammare hastighet som gäller för USB 1.1. I så fall fungerar skrivaren som den ska men utskriftshastigheten kan minska beroende på kommunikationshastigheten.
Det går inte att kommunicera med skrivaren via USB Kontroll1 Kontrollera att skrivaren är på. Kontroll2 Anslut USB-kabeln ordentligt. Som bilden nedan visar sitter USB-porten på skrivarens baksida. Viktigt! • Anslut till "Typ B" terminalens den skrivaren med den v-formade sidan vänd UPP. Mer information finns i den handbok som medföljde USB-kabeln.
Problem med installation och hämtning Det går inte att installera skrivardrivrutinen (Windows) 210
Det går inte att installera skrivardrivrutinen (Windows) • Om installationen inte startar när du sätter i installations-CD:n: Följ anvisningarna nedan för att starta installationen. 1. Gör följande inställningar. ◦ I Windows 10 klickar du på Start-knappen > Utforskaren (File Explorer) och sedan på Den här datorn (This PC) i listan till vänster. ◦ I Windows 8.
• Om du inte kan komma vidare från skärmen Skrivaranslutning (Printer Connection): Det går inte att fortsätta efter skärmen Skrivaranslutning • Andra fall: Installera om skrivardrivrutinen. Om skrivardrivrutinen inte installerades ordentligt avinstallerar du skrivardrivrutinen, startar om datorn och installerar sedan om skrivardrivrutinen. Ta bort skrivardrivrutiner som du inte längre behöver Installera om skrivardrivrutinen med installations-CD:n eller installera den från Canon-webbplatsen.
Fel och meddelanden Ett fel inträffar Meddelande (supportkod) visas 213
Ett fel inträffar Om det uppstår fel vid utskrift, som t.ex. att papperet tar slut i skrivaren eller att ett papper fastnar blinkar lampan Alarm eller lampan PÅ (ON) och Alarm växelvis. En supportkod (felkod) visas som nedan på datorns skärm för Windows. Kontrollera statusen för lampan Alarm och meddelandet och vidta sedan lämplig åtgärd.
1714 9 blinkningar Det kan sitta kvar skyddsmaterial eller tejp på hållaren för FINE-kassetten. 11 blinkningar Inställningarna för papperstyp och pappersformat är inte korrekta. Det går inte att skriva ut med nuvarande utskriftsinställningar. 1890 4102 4103 12 blinkningar Det går inte att skriva ut angivna data. 4100 13 blinkningar Bläcket kan ha tagit slut. 1686 14 blinkningar Bläckkassetten går inte att känna igen. 1684 15 blinkningar FINE-kassetten går inte att känna igen.
9 blinkningar Ett skrivarfel har inträffat. 6800 6801 10 blinkningar Ett fel som kräver service har inträffat. B202 B203 B204 B205 Andra fall än ovan Ett skrivarfel har inträffat. 6500 6930 6931 6932 6933 6940 6941 6942 6943 6944 6945 6946 När en supportkod och ett meddelande visas på datorns skärm (Windows): Obs! • Mer information om hur du löser fel utan supportkoder finns i Meddelande (supportkod) visas.
Meddelande (supportkod) visas I det här avsnittet beskrivs vissa fel och meddelanden som kan visas. Obs! • En supportkod (felkod) visas på datorns skärm för vissa fel. Mer information om fel med supportkoder finns i Lista över supportkoder för fel.
Avinstallera skrivardrivrutinen enligt anvisningarna i Ta bort skrivardrivrutiner som du inte längre behöver och installera om den från installations-CD:n eller Canon webbplats. När skrivaren är ansluten till datorn med en USB-kabel kontrollerar du enhetens status från datorn. Kontroll4 Kontrollera enhetens status enligt anvisningarna nedan. 1. Öppna Enhetshanteraren på datorn enligt nedan. Om skärmen Användarkontokontroll (User Account Control) visas följer du anvisningarna på skärmen.
Försök skriva ut igen när aktuellt utskriftsjobb är slutfört. Skärmen Inkjet Printer/Scanner/Fax Extended Survey Program visas (Windows) Om Inkjet Printer/Scanner/Fax Extended Survey Program har installerats visas en fråga varje månad i tio år om tillåtelse att skicka information om användningen av skrivaren och programmen. Läs informationen på skärmen och följ anvisningarna nedan. • Om du samtycker till att delta i enkätprogrammet: Klicka på Jag accepterar (Agree) och följ anvisningarna på skärmen.
• Avinstallera Inkjet Printer/Scanner/Fax Extended Survey Program: Om du vill avinstallera Inkjet Printer/Scanner/Fax Extended Survey Program klickar du på Avinstallera (Uninstall) och följer anvisningarna på skärmen. • Ändra inställning av bekräftelseskärmen: 1. Gör följande inställningar. ◦ I Windows 10 högerklickar du på Start-knappen och väljer Program och funktioner (Programs and Features). ◦ I Windows 8.
• Om du samtycker till att delta i enkätprogrammet: Klicka på Jag accepterar (Agree) och följ anvisningarna på skärmen. Informationen om skrivaranvändning skickas via internet. När du har slutfört proceduren skickas informationen därefter automatiskt och bekräftelsemeddelandet visas inte igen.
2. Välj Program (Applications) från menyn Gå (Go) i Finder, dubbelklicka på mappen Canon Utilities och på mappen Inkjet Extended Survey Program. 3. Flytta Canon Inkjet Printer/Scanner/Fax Extended Survey Program.app till Papperskorgen (Trash) 4. Starta om datorn. Töm Papperskorgen (Trash) och starta om datorn. • Ändra inställning: Följ anvisningarna nedan om du vill att bekräftelseskärmen ska visas varje gång informationen om skrivaranvändning skickas eller om du vill återuppta enkäten. 1.
Lista över supportkoder för fel Supportkoden visas på datorskärmen när fel inträffar. Med "supportkod" avses ett felnummer som visas tillsammans med ett felmeddelande. När ett fel inträffar kontrollerar du supportkoden som visas på datorskärmen och vidtar lämplig åtgärd.
Lista över supportkoder för fel (papperet fastnar) Om papperet fastnar tar du bort det med hjälp av instruktionerna nedan.
1300 Orsak Papper har fastnat när papper matades från det bakre facket. Vad som ska göras Om papper som matas från det bakre facket fastnar, tar du bort papperet som fastnat från pappersutmatningsfacket eller från det bakre facket enligt anvisningarna nedan. 1. Dra försiktigt ut papperet, antingen från pappersutmatningsfacket eller från det bakre facket beroende på vilket som är enklast. Håll i papperet med båda händerna och dra ut det långsamt så att det inte går sönder.
Papper har fastnat inuti skrivaren Om papperet som har fastnat rivs sönder och du inte kan ta bort det från pappersutmatningsfacket eller från det bakre facket eller om papperet sitter kvar i skrivaren tar du bort papperet genom att följa anvisningarna nedan. Obs! • Om papperet fastnar vid utskrift och du måste stänga av skrivaren för att ta bort det trycker du på knappen PÅ/Stopp (ON/Stop) för att stoppa utskrift innan du stänger av skrivaren. 1. Stäng av skrivaren och koppla ur den. 2.
4. Använd båda händerna för att ta tag i det papper som har fastnat. Om papperet har rullat sig drar du ut det. 5. Dra långsamt ut papperet så att det inte går sönder. 6. Se till att ta bort allt papper som har fastnat. Om papperet rivs sönder när du drar ur det kan en bit finnas kvar i skrivaren. Kontrollera i så fall följande och ta bort det papper som finns kvar.
• Finns det något papper kvar under hållaren för FINE-kassetten? • Finns det små bitar papper i skrivaren? • Finns det papper i tomrummen till vänster och höger (B) i skrivaren? 7. Stäng luckan. Alla jobb i utskriftskön har avbrutits. Gör om utskriften. Obs! • När du fyller på papper igen ska du kontrollera att du använder en lämplig papperstyp och att du fyller på det på rätt sätt.
1000 Orsak Möjliga orsaker är bland annat följande. • Det finns inget papper i bakre facket. • Papperet i det bakre facket har inte fyllts på som det ska. Vad som ska göras Vidta motsvarande åtgärder nedan. • Fyll på papper i det bakre facket. • Justera pappersledaren mot pappersbunten när du fyller på papper. • Välj en papperstyp för papperet i det bakre facket genom att trycka på skrivarens Välj papper (Paper Select)-knapp.
1200 Orsak Luckan är öppen. Vad som ska göras Stäng locket och vänta en stund. Stäng den inte när du byter en FINE-kassett.
1203 Orsak Luckan öppnas under utskrift. Vad som ska göras Om det finns papper kvar inuti skrivaren, dra försiktigt ut papperet med båda händerna och stäng luckan. Tryck på knappen FORTSÄTT (RESUME) på skrivaren för att åtgärda felet. Skrivaren matar ut ett tomt ark papper och fortsätter att skriva ut på nästa papper. Skrivaren skriver inte ut igen den sida som skrevs ut när luckan öppnades. Försök skriva ut igen.
1401 Orsak FINE-kassetten är inte installerad. Vad som ska göras Installera FINE-kassetten. Om felet kvarstår kan FINE-kassetten vara skadad. Kontakta närmaste Canon-servicecenter för att begära service.
1430 Orsak FINE-kassetten går inte att känna igen. Vad som ska göras Ta bort FINE-kassetten och installera om den. Om felet kvarstår kan FINE-kassetten vara skadad. Byt ut FINE-kassetten mot en ny Om detta fortfarande inte löser problemet kontaktar du närmaste Canon-servicecenter för att begära service.
1485 Orsak Lämplig bläckkassett är inte installerad. Vad som ska göras Utskrift kan inte ske eftersom bläckkassetten inte är kompatibel med denna skrivare. Installera lämplig bläckkassett. Tryck på knappen PÅ/Stopp (ON/Stop) på skrivaren om du vill avbryta utskriften.
1682 Orsak FINE-kassetten går inte att känna igen. Vad som ska göras Byt ut FINE-kassetten. Om felet kvarstår kan FINE-kassetten vara skadad. Kontakta närmaste Canon-servicecenter för att begära service.
1686 Orsak Bläcket kan ha tagit slut. Vad som ska göras Funktionen som känner av den återstående bläcknivån kommer att inaktiveras, eftersom bläcknivån inte går att känna av korrekt. Om du vill fortsätta skriva ut utan den här funktionen, trycker du på knappen FORTSÄTT (RESUME) på skrivaren i minst 5 sekunder. För bästa kvalitet rekommenderar Canon att du använder nya, äkta Canon-kassetter. Canon ansvarar inte för några fel eller problem som beror på att du fortsätter skriva ut när bläcket är slut.
1688 Orsak Bläcket är slut. Vad som ska göras Byt ut bläckkassetten och stäng luckan. Om en utskrift pågår och du vill fortsätta skriva ut, trycker du på FORTSÄTT (RESUME)-knappen på skrivaren i minst 5 sekunder med bläckkassetten installerad. Utskriften fortsätter då fast bläcket är slut. Funktionen som känner av den återstående bläcknivån kommer att inaktiveras. Byt ut den tomma bläckkassetten direkt efter att utskriften är färdig.
168A Orsak FINE-kassett är inte rätt installerad, eller så är den installerade FINE-kassetten inte kompatibel med skrivaren. Vad som ska göras Skjut in utmatningsfackets förlängningsdel och utmatningsfacket, öppna luckan och ta sedan bort FINEkassetterna. Kontrollera att den FINE-kassett som är kompatibel med skrivaren är installerad. Installera sedan FINE-kassetterna igen. Byta ut en FINE-bläckkassett Tryck in FINE-kassetten till den klickar på plats. När installationen är klar, stäng locket.
1700 Orsak Behållaren för använt bläck är nästan full. Vad som ska göras Tryck på knappen FORTSÄTT (RESUME) på skrivaren för att fortsätta utskriften. Kontakta närmaste Canon-servicecenter för att begära service.
1890 Orsak Det kan sitta kvar skyddsmaterial eller tejp på hållaren för FINE-kassetten. Vad som ska göras Kontrollera att skyddsmaterialet och tejpen har tagits bort från hållaren för FINE-kassetten. Om skyddsmaterialet eller tejpen finns kvar skjuter du in utmatningsfackets förlängningsdel och utmatningsfacket för att ta bort det. Dra nedåt på tejpen för att ta bort skyddsmaterialet. Om locket är öppet, stäng det.
4102 Orsak Medietyp och pappersstorlek är inte korrekt inställda. Vad som ska göras Tryck på skrivarens PÅ/Stopp (ON/Stop)-knapp för att avbryta utskriften, ändra inställningen för medietypen eller pappersstorleken och försök sedan skriva ut igen. • När medietypen är inställd på Photo Paper Plus Glossy II: Ställ in pappersstorleken på 10 x 15 cm (4 x 6 tum). • När medietypen är inställd på Glossy Photo Paper: Ställ in pappersstorleken på 10 x 15 cm (4 x 6 tum).
4103 Orsak Det går inte att skriva ut med nuvarande utskriftsinställningar. Vad som ska göras Tryck på knappen PÅ/Stopp (ON/Stop) på skrivaren för att avbryta utskriften. Ändra sedan utskriftsinställningarna och försök skriva ut igen.
5100 Orsak Ett skrivarfel har inträffat. Vad som ska göras Avbryt utskriften och stäng av skrivaren. Kontrollera följande: • Kontrollera att rörelsen för hållaren för FINE-kassetten inte hindras av stabiliseringsstöd, papper som fastnat osv. Ta bort alla hinder. • Kontrollera att FINE-bläckkassetterna har installerats på rätt sätt. Tryck in FINE-kassetten till den klickar på plats. Starta skrivaren igen. Om detta inte löser problemet kontaktar du närmaste Canon-servicecenter för att begära service.
5200 Orsak Ett skrivarfel har inträffat. Vad som ska göras Stäng av skrivaren och koppla ur nätuttaget. Vänta en stund, koppla in skrivaren och sätt på den igen. Om detta inte löser problemet kontaktar du närmaste Canon-servicecenter för att begära service.
5B00 Orsak Ett skrivarfel har inträffat. Vad som ska göras Kontakta närmaste Canon-servicecenter för att begära service.
6000 Orsak Ett skrivarfel har inträffat. Vad som ska göras Om papperet har fastnat tar du bort det beroende på plats där papperet har fastnat och orsak. Lista över supportkoder för fel (papperet fastnar) Stäng av skrivaren och koppla ur nätuttaget. Anslut skrivaren till nätuttaget och sätt på igen. Om detta inte löser problemet kontaktar du närmaste Canon-servicecenter för att begära service.