Getting Started Guía de inicio Read Safety and Important Information (addendum) first. Lea primero Información de seguridad e información importante (apéndice).
1 Installing the Printer............................................................page 1 Instalación de la impresora.............................................página 1 2 Connecting with Computer and Smartphone/Tablet...........page 4 Conexión con el ordenador y con el teléfono inteligente o la tableta.....................................................
□ Power cord 5 Lift the operation panel and press the ON button. 6 Drag the screen and tap the language to select. 7 Read the messages and follow the on-screen instructions. □ Ink tanks for setup □S afety and Important Information □ Setup CD-ROM for Windows PC ENGLISH 1. Checking Included Items □G etting Started (this manual) 2.
2 a C OMPLETELY remove the orange tape. b Remove the protective wrap. b 3 Install all the ink tanks the same way as in step 4, and then confirm that all the colors appear on screen. 6 LIFT UP the scanning unit / cover, and then close it. a Hook the orange cap with your finger to remove it GENTLY. Do not push the both sides of the ink tank with the Y-shape air hole blocked. 4 5 If an error message appears on the screen, make sure the ink tanks are installed correctly. Do not touch.
Open the paper guides, and then align the guide in front with the mark of LTR or A4. 3 a L oad plain LTR or A4 size paper with the print side facing down. b Slide the right paper guide to align it with the side of the paper stack. 6 If the following screen appears, select OK. 7 Make sure that a pattern is printed for Print Head Alignment. ENGLISH 2 It takes about 2 minutes to finish printing. c Align the paper stack with the paper guide in front. a b c 4 8 a O pen the document cover.
5. Select Whether or Not to Connect to Computer or Smartphone In the following description, smartphones and tablet devices are collectively described as smartphone. 1 Make sure that the following screen appears. Windows 6-B. Connecting to Computer Mac OS You need a connection setup for each computer. Proceed with the setup from step 1 for each computer. 1 Start the setup file for either method or method .
Using Setup CD-ROM (Windows Only) ENGLISH a Load the Setup CD-ROM in your computer. ■■ When using Windows 10 or Windows 8.1: b When the following message appears on the right side of your computer screen, click it. c If the following screen appears, click Run Msetup4.exe. When This Message Does Not Appear (or Has Disappeared) 1. Click File Explorer on the taskbar. or 2. Click This PC on the left side of the opened window. 3. Double-click the CD-ROM icon on the right side of the window.
iOS 6-C. Connecting to Smartphone Android You need a connection setup for each smartphone. Proceed with the setup from step 1 for each smartphone. Preparation • Turn on Wi-Fi on your smartphone. • If you have a wireless router, connect your smartphone to the wireless router you want to connect to the printer. * For operations, refer to manuals of your smartphone and the wireless router or contact those manufacturers. 1 Install the application software Canon PRINT Inkjet/SELPHY in your smartphone.
a Tap Settings on your smartphone's home screen, and tap Canon_ij_XXXX in the Wi-Fi settings. a Tap the installed application software. ENGLISH Procedures below vary depending on iOS or Android. Select your operating system and proceed to its procedure. b Follow the on-screen instructions to register the printer. If Canon_ij_XXXX does not appear on the list, see "Preparation for Printer" below to operate the printer, and then repeat step a. b Tap the installed application software.
Loading Photo Paper Load photo paper in the rear tray. 1 Open the rear tray cover and pull out the paper support. 3 a L oad several sheets of photo paper with the print side facing up. b S lide the right paper guide to align it with the side of the paper stack. a b 2 4 Close the feed slot cover. 5 Pull out the paper output tray. Read the message on the printer's screen and register the information of the loaded paper. a O pen the feed slot cover. b Slide the right paper guide to the end.
□ Cable de alimentación □ Depósitos de tinta para configuración □ CD-ROM de instalación para Windows PC □ I nformación de seguridad e información importante □ Guía de inicio (este manual) 5 Levante el panel de control y pulse el botón ACTIVADO (ON). 6 Arrastre la pantalla y puntee el idioma para seleccionar. 7 Lea los mensajes y siga las instrucciones que aparezcan en pantalla. ESPAÑOL 1. Comprobación de los elementos suministrados 2.
2 a R etire COMPLETAMENTE la cinta naranja. b Retire el envoltorio protector. b 3 Instale todos los depósitos de tinta de la misma forma que en el paso 4 y después confirme que todos los colores se muestran en la pantalla. 6 LEVANTE la cubierta/unidad de escaneado y luego ciérrela. a Sujete la tapa naranja con su dedo para quitarla SUAVEMENTE. No empuje los lados del depósito de tinta si el orificio de aire en forma de Y está bloqueado.
Abra las guías del papel y después alinee la guía en la parte delantera con la marca de LTR o A4. 3 a C argue papel normal de tamaño LTR o A4 con el lado de impresión hacia abajo. b Deslice la guía del papel derecha para alinearla con el lado de la pila de papel. 6 Si aparece la siguiente pantalla, seleccione OK. 7 Asegúrese de que se imprima un patrón para Alineación de los cabezales de impresión (Print Head Alignment). La impresión tarda alrededor de 2 minutos en completarse.
5. Seleccione si desea conectar el ordenador a un teléfono inteligente En la siguiente descripción, los teléfonos inteligentes y las tabletas se describen en conjunto como teléfonos inteligentes. 1 Asegúrese de que aparezca la siguiente pantalla. Windows 6-B. Conexión con el ordenador Mac OS Necesitará configurar una conexión para cada ordenador. Complete la configuración desde el paso 1 para cada ordenador. 1 Inicie el archivo de configuración del método o el método .
Uso del CD-ROM de instalación (solo para Windows) a Cargue el CD-ROM de instalación en su ordenador. ■■ Si utiliza Windows 10 o Windows 8.1: c Si aparece la siguiente pantalla, haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe). d Si se muestra el cuadro de diálogo Control de cuentas de usuario (User Account Control), haga clic en Sí (Yes). Si este mensaje no se muestra (o ya no aparece) 1. Haga clic en el Explorador de archivos (File Explorer) o en la barra de tareas.
iOS 6-C. Conexión con un teléfono inteligente Android Necesitará configurar una conexión para cada teléfono inteligente. Complete la configuración desde el paso 1 para cada teléfono inteligente. Preparativos • Active la Wi-Fi en su teléfono inteligente. • Si dispone de un router inalámbrico, conecte su teléfono inteligente al router inalámbrico para conectar con la impresora.
Los procedimientos a continuación varían en función de iOS o Android. Seleccione su sistema operativo y continúe con el procedimiento correspondiente. a Toque Ajustes (Settings) en la pantalla de inicio de su teléfono inteligente y después toque Canon_ij_XXXX en los ajustes de Wi-Fi. a Puntee el software de la aplicación instalado. Si Canon_ij_XXXX no aparece en la lista, consulte la sección "Preparación para la impresora" a continuación para hacer funcionar la impresora y repita el paso a.
Carga de papel fotográfico Cargue el papel fotográfico en la bandeja posterior. 1 Abra la cubierta de la bandeja posterior y retire el soporte del papel. 3 a C argue varias hojas de papel fotográfico con el lado de impresión hacia arriba. b D eslice la guía del papel derecha para alinearla con el lado de la pila de papel. a b 2 4 Cierre la cubierta de la ranura de alimentación. 5 Extraiga la bandeja de salida del papel.
How-To Video Library Videoteca sobre procedimientos RMC (Regulatory Model Code): K10457
Access Online Manual Acceso al Manual en línea From Web site Desde el sitio web From desktop shortcut Windows 10 Desde el acceso directo del escritorio QT6-1979-V01 XXXXXXXX © CANON INC.