TS6200 series Online Manual English
Contents Using Online Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Symbols Used in This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Touch-enabled Device Users (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Basic Operation. . . . . . .
Loading Paper in the Cassette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Loading Envelopes in Rear Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Loading Originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Loading Originals on Platen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Inside View. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paper Load Limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 Unsupported Media Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Handling Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing from Smartphone/Tablet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291 Printing/Scanning with Wireless Direct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Paper Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Copying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking PC Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's Wi-Fi Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mechanical Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411 Printer Does Not Turn On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412 Printer Turns Off Unexpectedly or Repeatedly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413 USB Connection Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457 5011. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458 5012. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459 5100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual 10
Symbols Used in This Document Warning Instructions that, if ignored, could result in death, serious personal injury, or property damage caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or property damage caused by incorrect operation of the equipment. These must be observed for safe operation.
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved.
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc.
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LEADTOOLS Copyright (C) 1991-2009 LEAD Technologies, Inc.
MIT License Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. (1) Red Hat Incorporated Copyright (c) 1994-2009 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License.
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty -------------THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org --- end of FTL.TXT --The TWAIN Toolkit is distributed as is.
Basic Operation Printing Photos from a Computer Printing Photos from a Smartphone/Tablet Copying 27
Printing Photos from a Computer This section describes how to print photos with Easy-PhotoPrint Editor. 1. Open rear tray cover (A). Pull straight up and fold back paper support (B). 2. Open the feed slot cover (C). 3. Slide right paper guide (D) to open both paper guides. 4. Load photo paper in portrait orientation WITH PRINT SIDE FACING UP.
5. Slide right paper guide (D) to align with both sides of paper stack. 6. Close feed slot cover (C) gently. After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the touch screen.
7. If page size and media type on touch screen match size and type of paper loaded in rear tray, select Yes. If not, select Change to change the settings in accordance with the size and type of the loaded paper. 8. Open operation panel (E), pull out paper output tray (F) and paper output support (G), and then open output tray extension (H). Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing. 9. Start Easy-PhotoPrint Editor.
11. Click Browse (J) in From computer: and select folder with photos you want to print. 12. Click photos (K) you want to print and select Open (L). For Windows: To select two or more photos at a time, click photos while pressing the Ctrl key. For macOS: To select two or more photos at a time, click photos while pressing the command key. 13. Specify number of copies and other options under Print Settings (M).
For Windows: Specify the number of copies, your model name, the paper size, and other options. For macOS: Specify the number of copies, the paper size, and other options. Note • Selecting Same No. of each photo enables you to specify the number of copies for all photos with a single setting. • Selecting Same No. of each photo disables the number-of-copies setting specified for each photo. When unchecked, the previous settings for each copy are re-enabled.
Printing Photos from a Smartphone/Tablet This section describes how to print photos with Canon PRINT Inkjet/SELPHY. For details on how to download Canon PRINT Inkjet/SELPHY, see below. Print Easily from a Smartphone or Tablet with Canon PRINT Inkjet/SELPHY 1. Open rear tray cover (A). Pull straight up and fold back paper support (B). 2. Open the feed slot cover (C). 3. Slide right paper guide (D) to open both paper guides. 4. Load photo paper in portrait orientation WITH PRINT SIDE FACING UP.
5. Slide right paper guide (D) to align with both sides of paper stack. 6. Close feed slot cover (C) gently. After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the touch screen.
7. If page size and media type on touch screen match size and type of paper loaded in rear tray, select Yes. If not, select Change to change the settings in accordance with the size and type of the loaded paper. 8. Open operation panel (E), pull out paper output tray (F) and paper output support (G), and then open output tray extension (H). Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing. 9.
Copying This section describes how to load originals and copy them to plain paper loaded in the cassette. 1. Pull out the cassette (A) from the printer. 2. Remove the cassette cover (B). 3. Slide paper guides (C) in front and (D) on right to open guides. 4. Load plain paper in portrait orientation WITH PRINT SIDE FACING DOWN.
5. Align paper guides (C) in front and (D) on right with paper length and width. 6. Mount cassette cover (B) and insert cassette into printer.
After inserting the cassette into the printer, the paper setting confirmation screen for the cassette appears on the touch screen. 7. If page size on touch screen matches size of paper loaded in cassette, select Yes. If not, select Change to change the setting in accordance with the size of the loaded paper. 8. Open operation panel (E), pull out paper output tray (F) and paper output support (G), and then open output tray extension (H). Be sure to open the operation panel before printing.
11. Select Standard copy. 12. Open document cover (K). 13. Load original WITH SIDE TO COPY FACING DOWN and align it with alignment mark (L). 14. Close the document cover. 15. Check paper settings and press Black button (M) or Color button (N). Important • Do not open the document cover until copying is complete. Note • Your printer is equipped with many other convenient copy features.
Copying 40
Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and devices (e.g. computer/smartphone/tablet) using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. ◦ Connection methods vary depending on the wireless router type. ◦ You can change network settings such as the network name (SSID) and security protocol on the printer.
Changing Network Settings See below for changing connection settings for the printer and computer/smartphone/tablet.
Restrictions When connecting another device while a device (such as a computer) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connect via wireless router • You cannot establish a printer with wireless and wired connections at the same time. • Make sure your device and the wireless router are connected.
• If you connect a device and the printer using Wireless Direct, Internet connection may become unavailable depending on your environment. In that case, web services for the printer cannot be used. • In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, then configure settings again.
Network Connection Tips Default Network Settings Detect Same Printer Name Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of Wi-Fi Connection 45
Default Network Settings LAN Connection Defaults Item Default Enable/Disable LAN Disable LAN Network name (SSID) BJNPSETUP Wi-Fi security Disable IP address (IPv4) Auto setup IP address (IPv6) Auto setup Set printer name* XXXXXXXXXXXX Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 minutes Enable/disable Bonjour Enable Service name Canon TS6200 series LPR protocol setting Enable RAW protocol Enable LLMNR Enable PictBridge communication Enable ("XX" repr
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.) *2 The password is specified automatically when the printer is turned on for the first time.
Detect Same Printer Name When the printer is detected during setup, plural printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results. • For macOS: The printer names appear with the MAC address added at the end or as the printer name specified by Bonjour.
Connects to Another Computer via LAN/Changes from USB to LAN Connection For Windows: For macOS: For Windows: To add a computer to connect to the printer on a LAN or to change from USB to LAN connection, perform setup using the Setup CD-ROM or from the web page. For macOS: To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, perform setup from the web page.
Printing Network Settings Use the operation panel to print the printer's current network settings. Important • The network settings printout contains important information about your network. Handle it with care. 1. Check that printer is turned on, and display HOME screen. If the HOME screen is not displayed, touch the HOME button. 2. Load three sheets of A4 or Letter-sized plain paper. 3. Select "Network status" on the touch screen. Using the Operation Panel 4. Select Print details. 5.
2-1 Diagnostic Result Diagnostic result XXXXXXXX 2-2 Result Codes Result codes XXXXXXXX 2-3 Result Code Details Result code details http://canon.
3-2-21 Stateless Prefix Length2 Stateless prefix length 2 XXX 3-2-22 Stateless Address3 Stateless address 3 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-23 Stateless Prefix Length3 Stateless prefix length 3 XXX 3-2-24 Stateless Address4 Stateless address 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-25 Stateless Prefix Length4 Stateless prefix length 4 XXX 3-2-26 Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-27 Default Gateway2 Default gateway 2 XXX
3-3-11 Default Gateway Default gateway XXX.XXX.XXX.
5-21 Cert.
Reconfiguration Method of Wi-Fi Connection Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct). • For Windows: ◦ Redo setup using the Setup CD-ROM or from the web page. ◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility. Important • Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless connect mode on the printer following the procedure below. 1. Check that printer is turned on. 2.
IJ Network Device Setup Utility (Windows) IJ Network Device Setup Utility Starting Up IJ Network Device Setup Utility Diagnosing and Repairing Network Settings Performing/Changing Network Settings List of Models Which Does Not Support Diagnosis and Repair Function 56
IJ Network Device Setup Utility IJ Network Device Setup Utility allows you to diagnose or repair the network status, and to perform printer settings on network.
Starting Up IJ Network Device Setup Utility Start up IJ Network Device Setup Utility as shown below. • In Windows 10, select Start > (All apps > ) > Canon Utilities > IJ Network Device Setup Utility. • In Windows 8.1 or Windows 8, select IJ Network Device Setup Utility on the Start screen to start IJ Network Device Setup Utility. If IJ Network Device Setup Utility is not displayed on the Start screen, select the Search charm and search for "IJ Network Device Setup Utility".
Diagnosing and Repairing Network Settings IJ Network Device Setup Utility diagnoses and repairs computer settings or connection between the computer and printer when a problem (e.g. cannot print from a printer on the network) occurs. Important • Some models do not support diagnosis and repair function. For details: List of Models Which Does Not Support Diagnosis and Repair Function Follow the procedure below. 1. Start up IJ Network Device Setup Utility. 2. Check the displayed message and select Yes. 3.
Performing/Changing Network Settings Canon IJ Network Device Setup Utility Screen Performing Network Settings 60
Canon IJ Network Device Setup Utility Screen Items on Canon IJ Network Device Setup Utility Screen Menus on Canon IJ Network Device Setup Utility Screen Items on Canon IJ Network Device Setup Utility Screen Toolbar Items on Canon IJ Network Device Setup Utility Screen The screen below appears when you start up IJ Network Device Setup Utility and select Printer Network Setup. Detected printers are listed on the screen and the items below are shown.
Appears after performing network setup and clicking Set to close the window. • Requires Setup Indicates the printer is required to perform Wi-Fi setup. Performing/Changing Wi-Fi Settings • Not Set Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or enable IPv6 on Network Settings.... Performing/Changing Wi-Fi Settings • IP Address Overlap Indicates the IP address is duplicated to another printer.
Appears if the printer is used by IP address specified automatically. • Manual Appears if the printer is used by IP address specified manually. Note • If USB is selected from the pulldown menu on the toolbar, "-" is displayed. H: MAC Address Displays the MAC address of the detected printer. Note • If USB is selected from the pulldown menu on the toolbar, "-" is displayed. I: Device Name Displays the printer device name if it is registered.
D: Help menu Help Menu Items on Canon IJ Network Device Setup Utility Screen Toolbar This section describes items on Canon IJ Network Device Setup Utility Screen toolbar. A: Perform wired or Wi-Fi setup. Note • This item has the same function as Network Settings... in the Printer Settings menu. B: Redetects printers. Note • This item has the same function as Update in the View menu. C: Stops detecting printers. Note • This item has the same function as Cancel in the View menu.
Performing Network Settings Performing/Changing Wired LAN Connection (Ethernet Cable) Settings Performing/Changing Wi-Fi Settings Assigning Printer Information 65
Performing/Changing Wired LAN Connection (Ethernet Cable) Settings Follow the procedure below to perform/change wired LAN settings. Note • For some models, you can perform network setup for a USB connected printer using IJ Network Device Setup Utility. Select USB on Switch View under the View menu to display printers for which you can perform setup. 1. Start up IJ Network Device Setup Utility. 2. Check the displayed message and select Yes. 3. Select Printer Network Setup on the displayed screen.
7. Perform/change settings. You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol. • IPv4 settings A: Use IPv4 address Always selected. (displayed in a gray out state) B: Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server functionality must be enabled on your router.
A: Use IPv6 address Select when you use the printer with IPv6 environment. B: Use Stateless Address: Select when you use an IP address assigned automatically. Use a router compatible with IPv6. Note • This setting item is not available depending on the printer you are using. C: Use Manual Address: Select this option if no DHCP server functionality is available in your setup where you use the printer, or you want to use a fixed IP address. Enter the IP address and IP address prefix length.
Performing/Changing Wi-Fi Settings Follow the procedure below to perform/change Wi-Fi settings. Important • Enable Easy wireless connect (Cableless setup) before performing printer setup. (Not required if you change the IP address.) For details, search for "NR049" on your printer's online manual and see the page shown. • If you use a printer over the Wi-Fi, we highly recommend you perform security settings for Wi-Fi network using WPA/WPA2 from the viewpoint of security.
Select Wi-Fi and click OK. 6. Enter password and click OK. The Network Settings screen appears. 7. Perform/change settings. You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol. • IPv4/IPv6 settings A: Network Type: Select the Wi-Fi mode. ◦ Infrastructure Connects the printer to the Wi-Fi with a wireless router. ◦ Direct Connects the printer to wireless communication devices (smartphone or tablet) without a wireless router.
C: Search... The Detected Wireless Routers screen is displayed to select a wireless router to connect to. For a wireless router already connected to the computer, Available is displayed on Communication Status. If you select a wireless router with Not Connected on Communication Status from the list, clicking Set displays the WPA/WPA2 or WEP setting screen for a wireless router.
• IPv6 settings Note • If USB is selected from the pulldown menu on the toolbar, you cannot perform IPv6 settings. • The setting items below are available only when Infrastructure is selected for Network Type:. If Direct is selected, all items are displayed in a gray out status and you cannot perform any settings. A: Use IPv6 address Select when you use the printer with IPv6 environment. B: Use Stateless Address: Select when you use an IP address assigned automatically. Use a router compatible with IPv6.
Note • This setting item is not available depending on the printer you are using. 8. Click Set.
Assigning Printer Information Follow the procedure below to assign/change printer location name or device name. The names appear on Device Name: and Location: on the Canon IJ Network Device Setup Utility screen. Note • If USB is selected from the pulldown menu on the toolbar, this setting item is not available. 1. Start up IJ Network Device Setup Utility. 2. Check the displayed message and select Yes. 3. Select Printer Network Setup on the displayed screen. Detected printers are listed. 4.
List of Models Which Does Not Support Diagnosis and Repair Function The following models does not support "Diagnose and Repair" function of IJ Network Device Setup Utility.
Handling Paper, Originals, Ink Tanks, etc.
Loading Paper Paper Sources Loading Paper in the Rear Tray Loading Paper in the Cassette Loading Envelopes in Rear Tray 77
Paper Sources The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B). You can load all supported paper on the rear tray. Supported Media Types You can load A4, B5, A5, or Letter-sized plain paper in the cassette. Note • When printing, select the correct page size and media type. If you select the wrong page size or media type, the printer may feed paper from the wrong paper source or may not print with the proper print quality.
Loading Paper in the Rear Tray You can load plain paper or photo paper. You can also load envelopes on the rear tray. Loading Envelopes in Rear Tray Important • If you cut plain paper to a size of 5" x 7" (13 x 18 cm) or smaller to perform a trial print, it may cause a paper jam. Note • We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Supported Media Types.
3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING UP.
6. Slide right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly. Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams. Note • Do not load sheets of paper higher than the load limit mark (G).
7. Close feed slot cover (C) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover. After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the touch screen. 8. If page size and media type on touch screen match size and type of paper loaded in rear tray, select Yes. If not, select Change to change the settings in accordance with the size and type of the loaded paper.
9. Open operation panel (H), pull out paper output tray (I) and paper output support (J), and then open output tray extension (K). Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing. Note • There are various types of paper, such as paper with a special surface coating for printing photos at optimal quality and paper suitable for documents.
Loading Paper in the Cassette You can load A4, B5, A5, or Letter-sized plain paper in the cassette. Note • In the cassette, be sure to load only plain paper. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types. 1. Prepare paper. Align the edges of paper. If paper is curled, flatten it. Note • Align the edges of paper neatly before loading.
4. Slide paper guides (C) in front and (D) on right to open guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING DOWN, and place it in center of cassette. Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams. Note • Align the paper stack with the edge of the cassette as shown in the figure below. If the paper stack is in contact with the protrusion (G), the paper may not be fed properly.
6. Slide front paper guide (C) to align it with paper stack. Align paper guide with where it clicks into place. 7. Slide right paper guide (D) to align it with paper stack. Do not slide the paper guide too hard against the paper. The paper may not be fed properly. Note • Do not load sheets of paper higher than the load limit mark (H). • Keep the paper stack height below the tabs (I) of the paper guides.
8. Mount cassette cover (B) and insert cassette into printer. Push the cassette into the printer until it stops. After inserting the cassette into the printer, the paper setting confirmation screen for the cassette appears on the touch screen. 9. If page size on touch screen matches size of paper loaded in cassette, select Yes. If not, select Change to change the setting in accordance with the size of the loaded paper. 10.
Note • To prevent incorrect printing, this printer has a function that detects whether the settings for the paper loaded in the cassette matches the paper settings. Before printing, make print settings in accordance with the paper settings. When this function is enabled, an error message is displayed if these settings do not match to prevent incorrect printing. When this error message is displayed, check and correct the paper settings. • When the cassette is pulled out, it automatically extends.
Loading Envelopes in Rear Tray You can load Envelope DL and Envelope Com 10 on the rear tray. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from the operation panel or from a PictBridge (Wi-Fi) compliant device is not supported. • Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction.
3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load envelopes in portrait orientation WITH PRINT SIDE FACING UP. Up to 10 envelopes can be loaded at once. Fold flap of the envelope and load the envelope in portrait orientation with the address side facing up. 6. Slide right paper guide (D) to align with both sides of envelopes.
Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly. Note • Do not load envelopes higher than the load limit mark (E). 7. Close feed slot cover (C) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the touch screen. 8. If page size and media type shown on touch screen match size and type of envelopes loaded in rear tray, select Yes. If not, select Change to change the settings in accordance with the size and type of the loaded envelopes. 9. Open operation panel (F), pull out paper output tray (G) and paper output support (H), and open output tray extension (I).
Note • To prevent incorrect printing, this printer has a function that detects whether the settings for the paper loaded on the rear tray matches the paper settings. Before printing, make print settings in accordance with the paper settings. When this function is enabled, an error message is displayed if these settings do not match to prevent incorrect printing. When this error message is displayed, check and correct the paper settings.
Loading Originals Loading Originals on Platen Loading Based on Use Supported Originals How to Detach / Attach the Document Cover 94
Loading Originals on Platen 1. Open the document cover. 2. Load original WITH SIDE TO SCAN FACING DOWN on platen. Loading Based on Use Supported Originals Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break. • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass. • Do not put any pressure of 4.4 lb (2.
Important • After loading the original on the platen, be sure to close the document cover before starting to copy or scan.
Loading Based on Use Load the original in the correct position according to the function to use. If you do not load the original correctly, it may not be scanned properly. Originals Magazines, Newspapers, and Documents Function Copying Scanning by detecting the type and size of the original automatically How to Load Loading the Original to Be Aligned with the alignment mark If you scan using the operation panel, select Auto scan for Doc.type in Scan.
Loading the Original to Be Aligned with the alignment mark Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen and align it with the alignment mark . Portions placed on the diagonally striped area cannot be scanned. Important • The printer cannot scan the striped area (A) (0.04 inch (1 mm) from the edges of the platen glass). Loading Only One Original in Center of Platen Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.
Loading Two or More Originals on Platen Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 inch (1 cm) or more space between the edges (diagonally striped area) of the platen and the originals, and between the originals. Portions placed on the diagonally striped area cannot be scanned. You can place up to 12 items. B: More than 0.40 inch (1 cm) Note • The Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees.
Supported Originals Item Types of originals Details • Text document, magazine, or newspaper • Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) Size (width x height) Max. 8.5 x 11.7 inches (216 x 297 mm) Note • When loading a thick original such as a book on the platen, you can load it by removing the document cover from the printer.
How to Detach / Attach the Document Cover Detaching the document cover: Hold up the document cover in portrait orientation and then tip it back. Attaching the document cover: Fit both hinges (A) of the document cover into the holder (B) and insert both hinges of the document cover vertically as illustrated below.
Replacing Ink Tanks Replacing Ink Tanks Checking Ink Status on the Touch Screen Ink Tips 103
Replacing Ink Tanks When remaining ink cautions or errors occur, the message will appear on the touch screen to inform you of the error. In this state, the printer cannot print or scan. Take appropriate action according to the message. An Error Occurs Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure. • For precautionary notes on handling ink tanks, see Notes on ink tanks.
Important • Do not touch other parts besides the ink tanks. • Handle the ink tank carefully to avoid staining of clothing or the surrounding area. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables. Note • Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks. 4.
5. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the Y-shape air hole (D). 6. Lift up the tab on the orange protective cap (E) to remove it off GENTLY. Important • Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air hole (D) blocked, ink may splash. • Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may stain your hands if you touch them.
8. Press on the top of the ink tank until the ink tank snaps firmly into place. Important • You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the print head holder. • You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. 9. Close the scanning unit / cover. To close the scanning unit / cover, hold it up once, then take it down gently.
Caution • When closing the scanning unit / cover, be careful not to get your fingers caught. Note • If the error message appears after the scanning unit / cover is closed, take appropriate action. An Error Occurs • When you start printing after replacing the ink tank, the printer starts cleaning the print head automatically. Do not perform any other operations until the printer completes the cleaning of the print head.
Checking Ink Status on the Touch Screen 1. Make sure that the power is turned on, and display the HOME screen. If the HOME screen is not displayed, press the HOME button to display it. 2. Select (Hint) on HOME screen. Using the Operation Panel The hint menu screen will appear. 3. Select Estimated ink levels. A symbol appears in the area A if there is any information about the remaining ink level. Example: The ink is running low. Prepare a new ink tank.
Ink Tips How is ink used for various purposes other than printing? Ink may be used for purposes other than printing. When you use the Canon printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink. For this reason, the number of sheets that can be printed with the first ink tanks is fewer than the succeeding ink tanks.
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head 111
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink tank. Note • Make sure that the orange protective tape does not remain on the ink tank. • Check the ink status.
Step3 Clean the print head. From the printer Cleaning the Print Head From the computer • For Windows: Cleaning the Print Heads • For macOS: Cleaning the Print Heads After cleaning the print head, print and examine the nozzle check pattern: Step1 If the problem is not resolved after performing from step 1 to step 3 twice: Step4 Clean the print head deeply.
Adjusting Print Head Position 114
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Check that printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 7. Select Yes. The nozzle check pattern will be printed and two pattern confirmation screens will appear on the touch screen. 8. Examine the nozzle check pattern.
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern C or horizontal white streaks in the pattern D. A: No missing lines/No horizontal white streaks B: Lines are missing/Horizontal white streaks are present 2. Select the pattern that is closer to the printed nozzle check pattern on the confirmation screen.
The printer starts cleaning the print head. Cleaning the Print Head If the pattern D or any color in the pattern C is not printed: (Example: Magenta pattern is not printed) The cleaning is required. Select Also B, then select Yes on the cleaning confirmation screen. The printer starts cleaning the print head.
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Check that printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 7. Select Yes. The printer starts cleaning the print head. Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 minute. The pattern print confirmation screen will appear. 8. Select Yes. The nozzle check pattern will be printed. 9. Examine the nozzle check pattern. Note • If the problem is not resolved after cleaning the print head twice, clean the print head deeply.
Deep Print Head Cleaning If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Check that printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 7. Select Yes. The printer starts cleaning the print head deeply. Do not perform any other operations until the printer completes the deep cleaning of the print head. This takes about 1 to 2 minutes. The pattern print confirmation screen will appear. 8. Select Yes. The nozzle check pattern will be printed. 9. When the completion message appears, select OK. 10. Examine the nozzle check pattern.
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the ink tank whose ink is low. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Check that printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 7. Confirm the message, then select Yes. The print head alignment sheet will be printed. Important • Do not touch any printed part on the print head alignment sheet. If the sheet is stained or wrinkled, it may not be scanned properly. 8. Check message and place print head alignment sheet on platen. Place the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark on the upper left corner of the sheet with the alignment mark 124 .
9. Close the document cover gently, then select OK. The printer starts scanning the print head alignment sheet, and the print head position will be adjusted automatically. Important • Do not open the document cover or move the print head alignment sheet on the platen until adjusting the print head position is complete. • If the error message appears on the touch screen, select OK to release the error, then take appropriate action. An Error Occurs 10. When the completion message appears, select OK.
Cleaning Cleaning Exterior Surfaces Cleaning Platen and Document Cover Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning) Cleaning Cassette Pads 126
Cleaning Paper Feed Rollers If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary. You need to prepare: three sheets of A4 or Letter-sized plain paper 1. Check that printer is turned on. 2. Select (Setup) on HOME screen. Using the Operation Panel The setup menu screen will appear. 3. Select Maintenance.
9. Make sure that the paper feed roller has stopped rotating, then follow the message to load the three sheets of A4 or Letter-sized plain paper. 10. Open the operation panel, then pull out the paper output tray. 11. Select OK. The printer starts cleaning. The cleaning will be complete when the paper is ejected. 12. When the completion message appears, select OK. If the problem is not resolved after cleaning the paper feed roller, contact your nearest Canon service center to request a repair.
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper. 1. Check that printer is turned on. 2. Select (Setup) on HOME screen. Using the Operation Panel The setup menu screen will appear. 3. Select Maintenance.
9. Load only this sheet of paper in the cassette with the ridges of the creases facing up and the edge of the half with no crease facing to the far side. 10. Mount cassette cover (A) and insert cassette into printer. 11. Open the operation panel, then pull out the paper output tray. 12. Select OK. The paper cleans the inside of the printer as it feeds through the printer. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. 13.
If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be stained. Wipe off any ink from the protrusions using a cotton swab or the like. Important • Be sure to turn off the power and unplug the power cord before cleaning the printer.
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High Main Components and Their Use Main Components Power Supply Using the Operation Panel Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (macOS) Changing Se
Safety Safety Precautions Regulatory Information WEEE (EU&EEA) 133
Safety Precautions Safety Precautions • This manual contains important notices and safety precautions about your printer. Do not use the printer in ways other than described in the accompanying manuals, as this may result in fire, electric shock or other unexpected accidents. Safety standard marks and declarations are only valid for the supported voltages and frequencies in the applicable countries or regions. Warning • Users with cardiac pacemakers: This product emits a low-level magnetic flux.
• In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. • Moving the printer • Do not hold the printer by the cassette. Hold the printer by its sides and carry it with both hands. General Notices Choosing a Location Refer to "Specifications" in the Online manual for details on operating environment.
• Do not place anything on top of the printer. Be especially careful to avoid metal objects such as paper clips and staples, and containers holding flammable liquids such as alcohol or thinner. • Do not apply excessive pressure when placing large objects on the platen glass. • Do not attempt to open, disassemble or modify the ink tanks. Ink may leak and damage your printer. • Do not throw print heads or ink tanks in the fire.
Regulatory Information Users in the U.S.A. FCC Notice (U.S.A. Only) For 120V, 60Hz model Model Number: K10482 (Contains FCC Approved WLAN Module K30365, FCC Approved Bluetooth K30375) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Interference Do not use the printer around medical equipment or other electronic devices. Signals from the printer may interfere with the correct operation of these devices.
WEEE (EU&EEA) Only for European Union and EEA (Norway, Iceland and Liechtenstein) This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
Ce symbole indique que ce produit ne doit pas être jeté avec les ordures ménagères, conformément à la directive DEEE (2012/19/UE) et à la réglementation de votre pays. Ce produit doit être confié au distributeur à chaque fois que vous achetez un produit neuf similaire, ou à un point de collecte mis en place par les collectivités locales pour le recyclage des Déchets des Équipements Électriques et Électroniques (DEEE).
peligrosas que normalmente están asociadas con los RAEE. Al mismo tiempo, su cooperación a la hora de desechar correctamente este producto contribuirá a la utilización eficazde los recursos naturales. Para más información sobre cómo puede eliminar el equipo para su reciclado, póngase en contacto con las autoridades locales, con las autoridades encargadas de los desechos, con un sistema de gestión RAEE autorizado o con el servicio de recogida de basuras doméstico.
Apenas para a União Europeia e AEE (Noruega, Islândia e Liechtenstein) Este símbolo indica que o produto não deve ser colocado no lixo doméstico, de acordo com a Directiva REEE (2012/19/UE) e a legislação nacional. Este produto deverá ser colocado num ponto de recolha designado, por exemplo, num local próprio autorizado quando adquirir um produto semelhante novo ou num local de recolha autorizado para reciclar resíduos de equipamentos eléctricos e electrónicos (EEE).
Αυτό το σύμβολο υποδηλώνει ότι αυτό το προϊόν δεν πρέπει να απορρίπτεται μαζί με τα οικιακά απορρίμματα, σύμφωνα με την Οδηγία σχετικά με τα Απόβλητα Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (ΑΗΗΕ) (2012/19/ΕΕ) και την εθνική σας νομοθεσία. Αυτό το προϊόν πρέπει να παραδίδεται σε καθορισμένο σημείο συλλογής, π.χ. σε μια εξουσιοδοτημένη βάση ανταλλαγής όταν αγοράζετε ένα νέο παρόμοιο προϊόν ή σε μια εξουσιοδοτημένη θέση συλλογής για την ανακύκλωση των αποβλήτων Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (ΗΗΕ).
kierrätysjärjestelmän ylläpitäjältä ja jätehuoltoyhtiöltä. Lisätietoja sähkö- ja elektroniikkalaiteromun keräyksestä ja kierrätyksestä on osoitteessa www.canon-europe.com/weee. Endast för Europeiska unionen och EES (Norge, Island och Liechtenstein) Den här symbolen visar att produkten enligt WEEE-direktivet (2012/19/EU) och nationell lagstiftning inte får sorteras och slängas som hushållsavfall. Den här produkten ska lämnas in på en därför avsedd insamlingsplats, t.ex.
Ez a szimbólum azt jelzi, hogy a helyi törvények és a WEEE-irányelv (2012/19/EU) szerint a termék nem kezelhető háztartási hulladékként. A terméket a kijelölt nyilvános gyűjtőpontokon kell leadni, például hasonló cserekészülék vásárlásakor, illetve bármelyik, elektromos és elektronikai berendezésekből származó hulladék (WEEE) átvételére feljogosított gyűjtőponton.
k účinnému využívaniu prírodných zdrojov. Ďalšie informácie o mieste recyklácie opotrebovaných zariadení získate od miestneho úradu, úradu životného prostredia, zo schváleného plánu OEEZ alebo od spoločnosti, ktorá zaisťuje likvidáciu komunálneho odpadu. Viac informácií nájdete aj na webovej stránke: www.canon-europe.com/weee.
elektros ir elektroninės įrangos (EEĮ) atliekų perdirbimo punktą. Netinkamas tokios rūšies atliekų tvarkymas dėl elektros ir elektroninėje įrangoje esančių pavojingų medžiagų gali pakenkti aplinkai ir žmonių sveikatai. Padėdami užtikrinti tinkamą šio gaminio šalinimo tvarką, kartu prisidėsite prie veiksmingo gamtos išteklių naudojimo.
Doar pentru Uniunea Europeană şi EEA (Norvegia, Islanda şi Liechtenstein) Acest simbol indică faptul că acest produs nu trebuie aruncat o dată cu reziduurile menajere, în conformitate cu Directiva DEEE (Directiva privind deşeurile de echipamente electrice şi electronice) (2012/19/UE) şi legile naţionale.
vrstom otpada može da ima moguće negativne posledice po životnu sredinu i ljudsko zdravlje usled potencijalno opasnih materijala koji se uglavnom vezuju za EEE. U isto vreme, vaša saradnja na ispravnom odlaganju ovog proizvoda će doprineti efikasnom korišćenju prirodnih resursa. Za više informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću.
Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High 150
Legal Restrictions on Scanning/Copying Scanning, printing, copying, or modifying copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative.
Printer Handling Precautions Do not place any object on the document cover! Do not place any object on the document cover. It will fall into the rear tray when the document cover is opened and cause the printer to malfunction. Also, place the printer where objects will not fall on it.
Transporting Your Printer When relocating the printer for changing your living place or repairing it, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport. • With the print head and ink tank left installed in the printer, press the ON button to turn off the power. This allows the printer to automatically cap the print head, thus preventing it from drying.
8. Attach the protective material to the printer when packing the printer in the box.
When Repairing, Lending, or Disposing of the Printer If you have entered personal data, passwords and/or other security settings on the printer, such information may be stored in the printer. When sending the printer for repair, lending or transferring the printer to another person, or disposing of the printer, please be sure to follow the steps below in order to delete such information and prevent third parties from accessing it. • Select Yes.
Keeping Print Quality High The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paintstick, or bleed if water or sweat comes in contact with the printed area.
Main Components and Their Use Main Components Power Supply Using the Operation Panel 157
Main Components Front View Rear View Inside View Operation Panel 158
Front View A: Operation Panel Use to change the settings of the printer or to operate it. Operation Panel B: Platen Load an original here. C: Document Cover Open to load an original on the platen. D: Cassette Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer. Loading Paper in the Cassette E: Paper Guides Align with right/left/front sides of the paper stack. F: Cassette Cover Detach to load paper in the cassette. G: Paper Output Tray Printed paper is ejected.
I: Output Tray Extension Open to support ejected paper. J: Feed Slot Cover Prevents anything from falling into the feed slot. Open it to slide the paper guides, and close it before printing. K: Rear Tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time. Loading Paper in the Rear Tray Loading Envelopes in Rear Tray L: Paper Support Extend to load paper in the rear tray.
Rear View A: USB Port Plug in the USB cable to connect the printer with a computer. B: Power Cord Connector Plug in the supplied power cord. C: Transport Unit Cover Open when removing jammed paper. D: Rear Cover Detach when removing jammed paper. Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable while the printer is printing or scanning with the computer. This can cause trouble.
Inside View A: Scanning Unit / Cover Scans originals. Also, lift and open it to replace an ink tank or to remove jammed paper inside the printer. B: Print Head Holder The print head is pre-installed. Note • For details on replacing an ink tank, see Replacing Ink Tanks.
Operation Panel A: ON button/ON lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on the power, make sure that the document cover is closed. B: HOME button Used to display the HOME screen. Using the Operation Panel C: Touch Screen Displays messages, menu items, and the operational status. Directly touch the screen lightly with your finger tip to select a menu item or displayed button.
Power Supply Checking that Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer 164
Checking that Power Is On The ON lamp is lit when the printer is turned on. Even if the touch screen is off, if the ON lamp is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. • The touch screen display will turn off if the printer is not operated for about 10 minutes. To restore the display, touch the touch screen. The print operation from a computer can also restore the display.
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The ON lamp flashes and then remains lit. Confirming that the Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. • If an error message is displayed on the touch screen, see An Error Occurs. • You can set the printer to automatically turn on when a print or scan operation is performed from a computer connected by USB cable or wireless network.
Important • When you unplug the power cord after turning off the printer, be sure to confirm that the ON lamp is off. Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval. This feature is set to on by default.
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • The power plug/power cord is hot. • The power plug/power cord is rusty. • The power plug/power cord is bent. • The power plug/power cord is worn. • The power plug/power cord is split. Caution • If you find anything unusual with the power plug/power cord described above, unplug the power cord and call for service.
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced. 1. Press the ON button to turn the printer off. 2. Confirm that the ON lamp is off. 3. Unplug the power cord.
Using the Operation Panel The operation panel consists of the touch screen (A) and buttons (B). Touch the HOME screen on the touch screen with your finger tip to select menus for copying, scanning, and other functions. Operations on the HOME Screen A: Touch Screen Basic Operation of the touch screen B: Buttons on the operation panel Basic Operation of the touch screen Touch the touch screen lightly with your finger tip or move your finger to access various functions or settings.
Touch Touch lightly with your finger tip. To move forward (or go back) menus or photos continuously, keep touching the forward (or back) mark. Flick Flick your finger on the screen up, down, left, or right. Use to switch menus or move forward or backward through photos. Drag While lightly touching the screen, move your finger up, down, left, or right. Use to view lists of items or move sliders.
Operations on the HOME Screen Display the menu screen or the settings screen from the HOME screen. C: Basic menu Select to copy or scan using the operation panel. After selecting a basic menu, the particular menus are displayed. D: Network Displays the current network status. Select to display the basic network information or to change the network settings. The icon differs depending on the network of use or the network status. Wi-Fi is enabled and the printer is connected to the wireless router.
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur. Place the printer near the wireless router. Wi-Fi is enabled but the printer is not connected to the wireless router. Wireless Direct is enabled. Wi-Fi is disabled. E: Wireless connect Select to connect the printer to a smartphone/tablet over Wi-Fi through Easy wireless connect or via Bluetooth. Tap this button to display a confirmation screen for starting a connection.
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (macOS) Changing Settings from Operation Panel 174
Changing Printer Settings from Your Computer (Windows) Changing the Print Options Registering a Frequently Used Printing Profile Setting the Ink Tank to be Used Managing the Printer Power Changing the Printer Operation Mode 175
Changing the Print Options You can change the detailed printer driver settings for print data that is sent from an application software. Check this check box if part of the image data is cut off, the paper source during printing differs from the driver settings, or printing fails. 1. Open the printer driver setup window 2. Click Print Options... on the Page Setup tab The Print Options dialog box opens. 3. Change the individual settings If necessary, change the setting of each item, and then click OK.
Registering a Frequently Used Printing Profile You can register the frequently used printing profile to Commonly Used Settings on the Quick Setup tab. Unnecessary printing profiles can be deleted at any time. Registering a Printing Profile 1. Open the printer driver setup window 2. Set the necessary items From Commonly Used Settings on the Quick Setup tab, select the printing profile to be used and if necessary, change the settings after Additional Features.
Quick Setup tab. The name and icon are displayed in Commonly Used Settings. Important • To save the page size, orientation, and number of copies that was set in each sheet, click Options..., and check each item. Note • When you re-install the printer driver or upgrade the printer driver version, the print settings that are already registered will be deleted from Commonly Used Settings. Registered print settings cannot be saved and preserved. If a profile is deleted, register the print settings again.
Setting the Ink Tank to be Used This feature enables you to specify the most appropriate ink tank among installed ink tanks according to an intended use. 1. Open the printer driver setup window 2. Click Print Options... on the Page Setup tab The Print Options dialog box appears. 3. Select the ink tank to be used from Print With Select the ink tank to be used for printing and click OK. 4. Click OK on the Page Setup tab When you perform printing, the specified ink tank will be used.
Managing the Printer Power This function allows you to manage the printer power from the Canon IJ Printer Assistant Tool. Power Off The Power Off function turns off the printer. When you use this function, you will not be able to turn the printer on from the Canon IJ Printer Assistant Tool. 1. Open Canon IJ Printer Assistant Tool 2. Execute power off Click Power Off. When the confirmation message appears, click OK. The printer power switches off.
Click OK. When the confirmation message appears, click OK. The setting is enabled after this. When you want to disable this function, select Disable from the list according to the same procedure. Note • When the printer is turned off, the Canon IJ Status Monitor message varies depending on the Auto Power On setting. When the setting is Enable, "Printer is standing by" is displayed. When the setting is Disable, "Printer is offline" is displayed.
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. Custom Settings 1. Open the Canon IJ Printer Assistant Tool 2. Make sure that the printer is on, and then click Custom Settings The Custom Settings dialog box opens. Note • If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing. 4. Apply the settings Click OK and when the confirmation message appears, click OK.
Changing Settings from Operation Panel Changing Settings from Operation Panel Setting Items on Operation Panel Print settings LAN settings Bluetooth settings PictBridge settings Other device settings Language selection Firmware update Reset setting Feed settings Web service setup ECO settings Quiet setting System information 184
Changing Settings from Operation Panel This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example. 1. Check that printer is turned on. 2. Select (Setup) on the HOME screen. Using the Operation Panel 3. Select Device settings. The Device settings screen is displayed. 4. Select a setting item to adjust. The setting screen for the selected item is displayed. 5. Select a setting item. 6.
For more on setting items on the operation panel: Setting Items on Operation Panel 186
Setting Items on Operation Panel Items for Printer Other device settings Language selection Web service setup ECO settings Quiet setting Items for Paper/Printing Print settings Bluetooth settings PictBridge settings Feed settings Items for Maintenance/Management LAN settings Firmware update Reset setting System information 187
Print settings • Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. • Extended copy amount Selects the amount of image that extends off the paper when printing in borderless (full). Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page.
LAN settings Wi-Fi Wireless Direct Wi-Fi When Wi-Fi is selected in the LAN settings screen, the network settings information of the printer when it is connected by Wi-Fi appears in the Wi-Fi setting list screen. To print the LAN settings, select Print details in the LAN settings screen and select Yes. Printing Network Settings Important • The network settings printout contains important information about your network. Handle it with care. The following setting items are displayed.
• Wi-Fi setup Selects the setup method for Wi-Fi connection. ◦ Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure. ◦ Manual connect Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
Network (SSID)/device name DIRECT-XXXX-TS6200series Password XXXXXXXXXX (10 characters) Wi-Fi security WPA2-PSK(AES) No. of devices connected now XX/XX IPv4 address XXX. XXX. XXX. XXX (12 characters) IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters) IPv4 default gateway XXX. XXX. XXX. XXX (12 characters) IPv6 link-local address XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters) MAC address (Wi-Fi) XXX. XXX. XXX.
• You cannot use a hyphen for the initial or last character of the printer name. • TCP/IP settings Performs IPv4 or IPv6 setting. • WSD setting Setting items when you use WSD (one of the network protocols supported in Windows). ◦ Enable/disable WSD Selects whether WSD is enabled or disabled. Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows. ◦ Optimize inbound WSD Selecting Enable allows you to receive the WSD printing data faster.
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer to detect printer's IP address from the printer name without a DNS server. • IPP settings Selecting Enable allows you to print via the network with the IPP protocol. • PictBridge communication Setting items for printing from a PictBridge (Wi-Fi) compliant device. ◦ Enable/disable communication Selecting Enable allows you to print from a PictBridge (Wi-Fi) compliant device.
Other device settings • Sound control Selects the volume. ◦ Keypad volume Selects the beep volume when tapping the touch screen or pressing the buttons on the operation panel. ◦ Alarm volume Selects the alarm volume. • Energy saving settings Allows you to turn on/off the printer automatically to save electricity. ◦ Auto power off Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer.
Language selection Changes the language for the messages and menus on the touch screen.
Firmware update You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server. Important • When you use this function, make sure the printer is connected to the Internet. Note • Only Check current version is available when Enable is selected for Enable/disable Wi-Fi of Wi-Fi in LAN settings. • Install update Performs the firmware update of the printer. If you select Yes, the firmware update starts.
Reset setting You can set the settings back to the default. • Web service setup only Sets the Web service settings back to the default. • LAN settings only Sets the LAN settings back to the default. • Settings only Sets the settings such as the paper size or media type back to the default. • Reset all Sets all settings you made to the printer back to the default. The administrator password specified by Remote UI or IJ Network Device Setup Utility reverts to the default setting.
Feed settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Web service setup Select this setting item from Web service setup in (Setup). • Web service usage registration/Web service usage cancellation Registers/Cancels Web service usage to use the printer device information to/from PIXMA/MAXIFY Cloud Link. • Web service connection setup The following setting items are available. ◦ Google Cloud Print setup Registers/Deletes the printer to/from Google Cloud Print.
ECO settings This setting allows you to use automatic duplex printing as a default to save paper and to turn on/off the printer automatically to save electricity. Using Power Saving Function Using Duplex Printing Using Power Saving Function Follow the procedure below to use power saving function. 1. Check that printer is turned on. 2. Select (Setup) on the HOME screen. Using the Operation Panel 3. Select ECO. 4. Select Energy saving settings. 5. Check on-screen instructions and select Next. 6.
1. Check that printer is turned on. 2. Select (Setup) on the HOME screen. Using the Operation Panel 3. Select ECO. 4. Select Two-sided printing setting. 5. Specify settings as necessary. A: Select two-sided copying as a default. B: Select two-sided printing of template forms on the printer as a default. Note • When duplex printing is selected, the icon is displayed on the setting items for duplex printing on each print settings screen.
Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. 1. Check that printer is turned on. 2. Select (Setup) on the HOME screen. Using the Operation Panel 3. Select Quiet setting. 4. Select Use quiet mode. The confirmation screen is displayed and the icon appears as the Quiet setting menu icon. Activate this setting to reduce the operating noise while printing is in progress.
System information To display this menu, select System information in (Hint). • Current version Displays the current firmware version. • Printer name Displays the printer name currently specified. • Serial number Displays the printer serial number. • MAC address (Wi-Fi) Displays the MAC address for Wi-Fi. • Root cert. thumbprint (SHA-1) Shows the root certification thumbprint (SHA-1) of the printer. Note • If the password is set to the printer, the password may be requested. • Root cert.
Specifications General Specifications Printing resolution (dpi) 4800* (horizontal) x 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. Interface USB Port: Hi-Speed USB * LAN Port: Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b * A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1. USB and LAN can be used at the same time. Print width 8 inches/203.
Auto duplex printing: • Top margin: 0.20 inch (5.0 mm) • Bottom margin: 0.20 inch (5.0 mm) • Left margin: ◦ Letter: 0.26 inch (6.4 mm) ◦ Other sizes: 0.14 inch (3.4 mm) • Right margin: ◦ Letter: 0.25 inch (6.3 mm) ◦ Other sizes: 0.14 inch (3.4 mm) Operating environment Temperature: 41 to 95 °F (5 to 35 °C) Humidity: 10 to 90 % RH (no condensation) * The performance of the printer may be reduced under certain temperature and humidity conditions.
Intensity adjustment 9 positions, Auto intensity (AE copy) Reduction / Enlargement 25 % - 400 % (1 % unit) Scan Specifications Scanner driver Windows: TWAIN 1.9 Specification, WIA Maximum scanning size A4/Letter, 8.5" x 11.7"/216 x 297 mm Optical resolution (horizontal x vertical) 1200 x 2400 dpi * Gradation (Input / Output) Gray: 16 bit/8 bit * Optical Resolution represents the maximum sampling rate based on ISO 14473.
Note: Operation can only be guaranteed on a PC with pre-installed Windows 7 or later. Hard Disk Space 3.0 GB or more Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. Display XGA 1024 x 768 macOS Operating System OS X 10.10.5 - OS X 10.11, macOS 10.12 - macOS 10.13 Hard Disk Space 1.5 GB or more Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice.
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Print Area 208
Supported Media Types For best results, choose paper designed for how you are printing. A variety of paper for documents as well as photos or illustrations is available from Canon. Use genuine Canon paper to print important photos, when possible. Media Types Genuine Canon paper Note • For warnings on use of the non-printable side, see each product's usage information. • For details on page sizes and media types, access the Canon website. • Genuine Canon paper is not available in some countries or regions.
Note • When printing photos saved on a PictBridge (Wi-Fi) compliant device, you must specify the page size and media type. Printing from Digital Camera Page Sizes You can use the following page sizes. Note • Page sizes and media types the printer supports differ depending on the OS you are using.
• rear tray ◦ Minimum size: 2.17 x 3.51 inches (55.0 x 89.0 mm) Maximum size: 8.50 x 26.61 inches (215.9 x 676.0 mm) • cassette ◦ Minimum size: 5.83 x 8.27 inches (148.0 x 210.0 mm) Maximum size: 8.50 x 11.69 inches (215.9 x 297.0 mm) Paper Weight You can use paper in the following weight range.
Paper Load Limit Genuine Canon Paper Paper for printing documents: Media Name Rear Tray Paper Output Tray Cassette Canon Red Label Superior Approx. 100 sheets Approx. 100 sheets Approx. 50 sheets Canon Océ Office Colour Paper Approx. 80 sheets Approx. 80 sheets Approx. 50 sheets High Resolution Paper *1 Approx. 80 sheets N/A Approx. 50 sheets Paper for printing photos: Media Name
Plain Paper (including recycled paper)*1 Approx. 100 sheets (Legal: 10 sheets) Approx. 100 sheets Approx. 50 sheets (Legal: 10 sheets) Envelopes 10 envelopes N/A *3 T-Shirt Transfers A4: 1 sheet N/A *3 Greeting Card Letter, 7" x 10" (18 x 25 cm): 1 sheet N/A *3 Card Stock A4, Letter: 1 sheet N/A *3 *1 Normal feeding at maximum capacity may not be possible with some types of paper, or under very high or low temperature or humidity. In this case, load half the amount of paper or less.
Unsupported Media Types Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction.
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands. • Do not touch the printed surface until the ink is dried. Even when the ink is dried, be careful not to touch the printed surface as much as possible when handling.
Printing Printing from Computer Printing from Smartphone/Tablet Printing Using Operation Panel Printing from Digital Camera Paper Settings 216
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (macOS AirPrint) Printing Using Canon Application Software Printing Using a Web Service 217
Printing from Application Software (Windows Printer Driver) Basic Printing Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Printer Driver Description Updating the MP Drivers 218
Basic Printing Setup This section describes settings on the Quick Setup tab used for basic printing. Basic Printing Setup 1. Check that printer is turned on 2. Load paper in printer 3. Open printer driver's setup screen 4. Select frequently used settings On the Quick Setup tab, use Commonly Used Settings to select from predefined print settings. When you select a print setting, the settings for Additional Features, Media Type, and Printer Paper Size automatically switch to the predefined values. 5.
Important • The print quality selections will differ depending on which print setting you select. 6. Select paper source For Paper Source, select Automatically Select, Rear Tray, or Cassette, whichever matches your purpose. Important • The paper source settings that can be selected may differ depending on the paper type and size.
7. Click OK The printer will now print using these settings. Important • When you select Always Print with Current Settings, the settings on the Quick Setup, Main, and Page Setup tabs are saved, and those settings are used in subsequent printings. • To register the current settings as a new preset, click Save... under Commonly Used Settings. Note • If the paper settings in the printer driver differ from the paper information registered on the printer, an error may occur.
From Paper Source, check the setting or select a new paper source. The current printer settings appear in Media Type and Page Size. 4. Apply settings To apply the printer settings to the printer driver, click Set. Note • If the Type on the printer is set to Ink Jet Hagaki, Hagaki K, or Hagaki, or if the Page size on the printer is set to 2L/5"x7"(13x18), click Set to display the dialog box. Select the media type and paper size that match your purpose, and then click OK.
Paper Settings on the Printer Driver and the Printer (Media Type) When you use this printer, selecting a media type and paper size that matches the print purpose will help you achieve the best print results. You can use the following media types on this printer. Canon genuine papers (Document Printing) Media Type in the printer driver Media name
Envelopes Envelope Envelope T-Shirt Transfers T-Shirt Transfers Others Greeting Cards Inkjet Greeting Card Others Card stock Card stock Card stock 224
Paper Settings on the Printer Driver and the Printer (Paper Size) When you use this printer, selecting a paper size that matches the print purpose will help you achieve the best print results. You can use the following paper sizes on this printer. Printer Paper Size in the printer driver Cassette paper information registered on the printer Letter 8.5"x11" 22x28cm Letter Legal 8.
Various Printing Methods Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Execute Borderless Printing Scaled Printing Page Layout Printing Tiling/Poster Printing Duplex Printing Setting Up Envelope Printing Printing on Postcards 226
Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application software. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab.
Setting the Number of Copies and Printing Order You can also set the number of copies on the Quick Setup tab. 1. Open the printer driver setup window 2. Specify the number of copies to be printed For Copies on the Page Setup tab, specify the number of copies to be printed. 3. Specify the print order Check the Print from Last Page check box when you want to print from the last page in order, and uncheck the check box when you want to print from the first page.
• Print from Last Page: /Collate: • Print from Last Page: /Collate: 4. Click OK When you execute print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
Execute Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing. You can also set borderless printing in Additional Features on the Quick Setup tab.
3. Check the paper size Check the Page Size list. When you want to change it, select another page size from the list. The list displays only sizes that can be used for borderless printing. 4. Adjust the amount of extension from the paper If necessary, adjust the amount of extension using the Amount of Extension slider. Moving the slider to the right increases the amount extending off the paper, and moving the slider to the left decreases the amount.
Important • When the amount of extension is decreased, an unexpected margin may be produced on the print, depending on the size of the paper. Note • When the Amount of Extension slider is set to the leftmost position, image data will be printed in the full size. If you set this when printing the address side of a postcard, the postal code of the sender is printed in the correct position.
Scaled Printing 1. Open the printer driver setup window 2. Set scaled printing Select Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software. 4. Set the scaling rate by using one of the following methods: • Select a Printer Paper Size When the printer paper size is smaller than the Page Size, the page image will be reduced.
• Specify a scaling factor Directly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Click OK When you execute print, the document will be printed with the specified scale. Important • When the application software which you used to create the original has the scaled printing function, configure the settings on your application software. You do not need to configure the same setting in the printer driver.
Note • Selecting Scaled changes the printable area of the document.
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. 1. Open the printer driver setup window 2. Set page layout printing Select Page Layout from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the printer driver. 3. Select the print paper size Select the size of the paper loaded in the printer from the Printer Paper Size list. 4.
Page Layout To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. Page Order To change the page arrangement order, select a placement method from the list. Page Border To print a page border around each document page, check this check box. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
Tiling/Poster Printing The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster. Setting Tiling/Poster Printing 1. Open the printer driver setup window 2. Set tiling/poster printing Select Tiling/Poster from the Page Layout list on the Page Setup tab.
4. Set the number of image divisions and the pages to be printed If necessary, click Specify..., specify the following settings in the Tiling/Poster Printing dialog box, and then click OK. Image Divisions Select the number of divisions (vertical x horizontal). As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a larger poster.
In the settings preview on the left of the Page Setup tab, click the pages that do not need to be printed. The pages that were clicked are deleted, and only the pages to be printed are displayed. Note • Click the deleted pages to display them again. • Right-click the settings preview to select Print all pages or Delete all pages. 2. Complete the setup After completing the page selection, click OK. When you execute print, only specified pages will be printed.
Duplex Printing You can also set duplex printing in Additional Features on the Quick Setup tab. Performing Automatic Duplex Printing You can perform the duplex printing without having to turn over the paper. 1. Open the printer driver setup window 2. Set automatic duplex printing Check the Duplex Printing check box on the Page Setup tab and confirm that Automatic is checked. 3. Select the layout Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list. 4.
Use normal-size printing Print without reducing the page. Use reduced printing Reduce the page slightly during printing. 5. Specify the side to be stapled The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list. 6. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 7. Complete the setup Click OK on the Page Setup tab.
3. Select the layout Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list. 4. Specify the side to be stapled The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list. 5. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 6. Complete the setup Click OK on the Page Setup tab.
• After printing the front page, there is an ink drying wait time before starting to print the back page (Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying wait time at Custom Settings in the Canon IJ Printer Assistant Tool.
Setting Up Envelope Printing 1. Load envelope on the printer 2. Open the printer driver setup window 3. Select the media type Select Envelope from Commonly Used Settings on the Quick Setup tab. 4. Select the paper size When the Envelope Size Setting dialog box is displayed, select Envelope Com 10, Envelope DL, Yougata 4 4.13"x9.25", or Yougata 6 3.86"x7.48", and then click OK. 5. Set the orientation To print the addressee horizontally, select Landscape for Orientation.
6. Select the print quality Select High or Standard that matches your purpose for Print Quality. 7. Click OK When you execute print, the information is printed on the envelope. Important • When you execute envelope printing, guide messages are displayed. To hide the guide messages, check the Do not show this message again check box. To show the guide again, click the View Printer Status button on the Maintenance tab, and start the Canon IJ Status Monitor.
Printing on Postcards 1. Load postcard on the printer 2. Open the printer driver setup window 3. Select commonly used settings Display the Quick Setup tab, and for Commonly Used Settings, select Standard. 4. Select the media type For Media Type, select Ink Jet Hagaki (A), Ink Jet Hagaki, Hagaki K (A), Hagaki K, Hagaki (A), or Hagaki. Important • This printer cannot print on postcards that have photos or stickers attached.
8. Click OK When you execute printing, the data will be printed onto the postcard. Important • If you want to display a guide message when performing postcard printing, open the Maintenance tab and click View Printer Status to start the Canon IJ Status Monitor. On the Option menu, choose Display Guide Message and click Hagaki Printing to enable the setting. To hide these guide messages, select the Do not show this message again check box.
Overview of the Printer Driver Canon IJ Printer Driver Opening Printer Driver's Setup Screen Canon IJ Status Monitor Checking Ink Status from Your Computer Instructions for Use (Printer Driver) 249
Canon IJ Printer Driver The Canon IJ printer driver (simply called printer driver below) is software that you install onto your computer so that it can communicate with the printer. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer. Because different printers support different data formats, you need a printer driver that supports your printer.
Opening Printer Driver's Setup Screen You can display the printer driver's setup screen from your application software or by clicking the printer icon. Displaying the Printer Driver's Setup Screen from Your Application Software Perform this procedure to set up the print settings during printing. 1. Select print command from application software The Print command can generally be found in the File menu. 2.
Canon IJ Status Monitor The Canon IJ Status Monitor is an application software that shows the status of the printer and the progress of printing. You will know the status of the printer with graphics, icons, and messages. Launching the Canon IJ Status Monitor The Canon IJ Status Monitor launches automatically when print data is sent to the printer. When launched, the Canon IJ Status Monitor appears as a button on the task bar. Click the button of the status monitor displayed on the task bar.
In such cases, take the appropriate action as described.
Checking Ink Status from Your Computer You can check the remaining ink level and the ink tank types for your model. 1. Open the printer driver setup window 2. Launching the Canon IJ Status Monitor On the Maintenance tab, click View Printer Status. 3. Display Estimated ink levels Ink status is displayed as an illustration. Note • The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer.
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • Depending on the document type to be printed, the paper feed method specified in the printer driver may not operate correctly. If this happens, open the printer driver setup window from the Print dialog box of the application software, and check the setting in the Paper Source field on the Main tab.
2. Open the printer driver setup window, and on the Page Setup tab, set Page Size to the same paper size that you specified in Word. 3. Set the Page Layout that you want, and then click OK to close the window. 4. Without starting printing, close the Print dialog box. 5. Open Word's Print dialog box again. 6. Open the printer driver setup window and click OK. 7. Start printing.
Printer Driver Description Quick Setup Tab Description Main Tab Description Page Setup Tab Description Maintenance Tab Description Canon IJ Status Monitor Description 257
Quick Setup Tab Description The Quick Setup tab is for registering commonly used print settings. When you select a registered setting, the printer automatically switches to the preset items. Commonly Used Settings The names and icons of frequently used printing profiles are registered. When you select a printing profile according to the purpose of the document, settings that match the purpose are applied.
If Page Size, Orientation, and Copies were set from the application software, those settings have priority. Envelope If you select this setting for printing an envelope, Media Type is set automatically to Envelope. In the Envelope Size Setting dialog box, select the size of the envelope to be used. Greeting Card When selected for printing a greeting card, the Media Type is automatically set to Inkjet Greeting Card. The Print Quality is also set to High, and a check-mark is added to Borderless Printing.
and click Specify.... Then in the Page Layout Printing dialog box that appears, specify the Page Order. 4-on-1 Printing Prints four pages of the document, side by side, on one sheet of paper. To change the page sequence, click the Page Setup tab, select Page Layout for Page Layout, and click Specify.... Then in the Page Layout Printing dialog box that appears, specify the Page Order. Duplex Printing Selects whether to print the document on both sides or one side of a sheet of paper.
Orientation Selects the printing orientation. If the application used to create your document has a similar function, select the same orientation that you selected in that application. Portrait Prints the document so that its top and bottom positions are unchanged relative to the paper feed direction. This is the default setting. Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction.
Always Print with Current Settings Prints documents with the current settings starting from the next print execution. When you select this function and then close the printer driver setup window, the information that you set on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings is possible starting from the next print execution.
Save the orientation setting Saves the Orientation to the printing profile in Commonly Used Settings. To apply the saved print orientation when the printing profile is selected, check this check box. If this check box is unchecked, the print orientation is not saved, and consequently the Orientation setting is not applied when the printing profile is selected. Instead the printer prints with the print orientation specified with the application software.
Switching the Paper Source to Match the Purpose Displaying the Print Results Before Printing Setting Paper Dimensions (Custom Size) Printing a Color Document in Monochrome Specifying Color Correction Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Intensity Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) Registering a Frequently Used Printing Profile 264
Main Tab Description The Main tab allows you to create a basic print setup in accordance with the media type. Unless special printing is required, normal printing can be performed just by setting the items on this tab. Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper. You can check an overall image of the layout. The printer illustration shows how to load paper to match the printer driver settings.
Print Quality Selects your desired printing quality. Select one of the following to set the print quality level that is appropriate for the purpose. Important • Depending on the Media Type settings, the same print results may be produced even if the Print Quality is changed. High Gives priority to print quality over printing speed. Standard Prints with average speed and quality. Draft This setting is appropriate for test printing.
Custom dialog box Set the quality level, and select the desired print quality. Quality You can use the slider bar to adjust the print quality level. Important • Certain print quality levels cannot be selected depending on the settings of Media Type. Note • The High, Standard, or Draft print quality modes are linked with the slider bar. Therefore when the slider bar is moved, the corresponding quality and value are displayed on the left.
Intensity Adjusts the overall intensity of your print. Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. Contrast Adjusts the contrast between light and dark in the image to be printed. Moving the slider to the right increases the contrast, moving the slider to the left decreases the contrast.
Note • Largest and Large cannot be selected when certain paper sizes or output paper sizes are selected. • The setting preview on the Main tab displays an image that allows you to check the overall layout. Largest Cyan/Magenta/Yellow 37 Intensity/Contrast 49 Large Cyan/Magenta/Yellow 19 Intensity/Contrast 25 Small Cyan/Magenta/Yellow 7 Intensity/Contrast 9 Color Variation Between Instances Sets the amount of color change between neighboring patterns. Select from Large, Medium, and Small.
Related Topics Setting the Print Quality Level (Custom) Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) Specifying Color Correction Adjusting Colors with the Printer Driver Printing with ICC Profiles Printing a Color Document in Monochrome Displaying the Print Results Before Printing 270
Page Setup Tab Description The Page Setup tab allows you to determine how a document is to be arranged on the paper. Also, this tab allows you to set the number of copies and the order of printing. If the application which created the document has a similar function, set them with the application. Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper. You can check an overall image of the layout.
To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left when orientation is [Landscape] check box. Rotate 180 degrees Prints the document by rotating it 180 degrees against the paper feed direction. The width of print area and the amount of extension that are configured in other application software will be reversed vertically and horizontally. Printer Paper Size Selects the size of paper actually loaded into the printer.
Page Layout Multiple pages of document can be printed on one sheet of paper. Specify... Opens the Page Layout Printing dialog box. Click this button to set details on page layout printing. Tiling/Poster This function enables you to enlarge the image data and divide the enlarged data into several pages to be printed. You can also glue together these sheets of paper to create large printed matter, such as a poster. Specify... Opens the Tiling/Poster Printing dialog box.
Important • If the application used to create your document has a similar function, specify the number of copies with the application without specifying it here. Print from Last Page Check this check box when you want to print from the last page in order. If you do this, you do not need to sort the pages into their correct order after printing. Uncheck this check box to print your document in normal order, starting from the first page.
Preview Icon Shows the settings made on the Page Layout Printing dialog box. You can check what the print result will look like before you actually print the data. Page Layout Specifies the number of document pages to fit on one sheet. Page Order Specifies the document orientation to be printed on a sheet of paper. Page Border Prints a page border line around each document page. Check this check box to print the page border line.
Booklet Printing dialog box This dialog box allows you to set how to bind the document as a booklet. Printing only on one side and printing a page border, can also be set in this dialog box. The settings specified in this dialog box can be confirmed in the settings preview on the printer driver. Preview Icon Shows the settings made on the Booklet Printing dialog box. You can check what the document will look like when printed as a booklet.
Print Options dialog box Makes changes to print data that is sent to the printer. Depending on the environment, this function may not be available. Disable ICM required from the application software Disables the ICM function required from the application software. When an application software uses Windows ICM to print data, unexpected colors may be produced or the printing speed may decrease. If these problems occur, checking this check box may resolve the problems.
Print after creating print data by page The print data is created in page units, and printing starts after the processing of one page of print data is complete. If a printed document contains unintended results such as streaks, selecting this check box may improve the results. Important • Uncheck this check box under normal circumstances. Prevention of Print Data Loss You can reduce the size of the print data that was created with the application software and then print the data.
Define Stamp... Opens the Stamp Settings dialog box. You can check the details of a selected stamp or save a new stamp. Place stamp over text Sets how the stamp is to be printed over the document. Check the Stamp check box to enable this. Check this check box to print a stamp over the printed document page. The printed data may be hidden behind the stamp. Uncheck this check box to print the document data over the stamp. The printed data will not be hidden behind the stamp.
For Date/Time/User Name, the creation date/time and user name of the printed object are displayed in Stamp Text. Important • Stamp Text appears grayed out and is unavailable if Date/Time/User Name is selected. TrueType Font Selects the font for the stamp text string. Style Selects the font style for the stamp text string. Size Selects the font size for the stamp text string. Outline Selects a frame that encloses the stamp text string.
Position Specifies the stamp position on the page. Selecting Custom from the list allows you to enter values for the X-Position and Y-Position coordinates directly. Orientation Specifies the angle of rotation for the stamp. The angle can be set by entering the number of degrees. Negative values rotate the stamp clockwise. Note • Orientation is enabled only when Text or Date/Time/User Name is selected for Stamp Type on the Stamp tab.
Select File... Opens the dialog box to open a file. Click this button to select a bitmap file (.bmp) to be used as the background. Layout Method Specifies how the background image is to be placed on the paper. When Custom is selected, you can set coordinates for X-Position and Y-Position. Intensity Adjusts the intensity of the bitmap to be used as a background. Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity.
Maintenance Tab Description The Maintenance tab allows you to start the Canon IJ Printer Assistant Tool or check the status of the printer. Maintenance and Preferences Canon IJ Printer Assistant Tool is started. You can perform printer maintenance or change the settings of the printer. View Printer Status Starts the Canon IJ Status Monitor. Perform this function when you want to check the printer status and how a print job is proceeding. About Opens the About dialog box.
Important • If the font for displaying the language of your choice is not installed in your system, the characters will be garbled.
Canon IJ Status Monitor Description The Canon IJ Status Monitor displays the printer status and the printing progress. The printer status is shown by the images, icons, and messages in the status monitor. Features of the Canon IJ Status Monitor The Canon IJ Status Monitor has the following functions: Onscreen display of printer status The status monitor displays the printer status in real-time. You can check the progress of each document to be printed (print job).
: There is a notice about something other than a warning or an error. : There has been an error which requires a service. Ink Tank If a low ink warning or an empty ink tank error occurs, the status monitor displays an icon. The status monitor also uses images to display the estimated ink levels of the ink tanks. Move the cursor onto the image to check detailed information such as the remaining ink levels and the names of ink tanks that the printer can use. Document Name Name of the document being printed.
Display Warning Automatically When a Low Ink Warning Occurs Starts the Canon IJ Status Monitor window automatically and displays it in front of the other windows when a low ink warning occurs. Start when Windows is Started Automatically starts the Canon IJ Status Monitor when Windows is started. Remote UI menu You are able to open the printer's Remote User Interface. You are able to check the printer status and run maintenance functions on the printer when connected to and using it through a network.
Installing the MP Drivers You can access our web site through the Internet and download the latest MP Drivers for your model. 1. Turn off the printer 2. Start the installer Double-click the icon of the downloaded file. The installation program starts. Important • A confirmation/warning dialog box may appear when starting, installing or uninstalling software. This dialog box appears when administrative rights are required to perform a task.
Printing Using Canon Application Software Easy-PhotoPrint Editor Guide 289
Printing Using a Web Service Using PIXMA/MAXIFY Cloud Link Printing with Google Cloud Print 290
Printing from Smartphone/Tablet Printing from iPhone/iPad/iPod touch (iOS) Printing from Smartphone/Tablet (Android) Printing from Windows 10 Mobile Device Printing/Scanning with Wireless Direct 291
Printing/Scanning with Wireless Direct You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices using Wireless Direct) This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly. Follow the procedure below to use Wireless Direct. 1. Preparing the printer.
8. Select ON. The Wireless Direct is enabled and a device can be connected to the printer wirelessly. Note • To show the password, select Show password. To hide the password, select Hide password. • The Wireless Direct setting list screen shows settings for when using the printer with Wireless Direct. Devices detect the printer by Network (SSID)/device name shown on the screen. • The password is required when connecting a device to the printer.
• Depending on the device you are using, entering the password is required to connect a device to the printer via Wi-Fi. Enter the password specified for the printer. • If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting to the printer, the printer displays a confirmation screen asking if you allow the device to connect to the printer. Make sure the name on the touch screen is the same as that of your wireless communication device and select Yes.
6. Select Settings. 7. Select a setting item. • Change SSID/device name Change the identifier (SSID) for Wireless Direct. The identifier (SSID) is the printer's name (device name) displayed on a Wi-Fi Direct compatible device. Follow the procedure below to change the identifier (SSID). 1. Select the entry field. 2. Enter the identifier (SSID) (up to 32 characters) and select OK. 3. Select OK. Selecting OK finishes specifying the identifier (SSID). Selecting Auto update displays the confirmation screen.
Important • To prevent an unauthorized access, we recommend you should not change the setting from the default. 8. Press HOME button. The HOME screen is displayed. Note • If you change the Wireless Direct setting of the printer, also change the wireless router setting of the device.
Paper Settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. Note • The default display setting is different between when you print or copy from the operation panel of the printer, when you print from Smartphone/tablet, when you print from Windows, and when you print from macOS.
• When you insert the cassette: The screen to register the cassette paper information is displayed. If the page size on the touch screen matches the size of the paper loaded in the cassette, select Yes. If not, select Change to change the setting in accordance with the size of the loaded paper. * You can load only plain paper in the cassette.
When you start printing/copying, a message is displayed and the paper setting specified for printing/ copying is shown under the message. Check the message and select Next. When the screen to select the operation is displayed, select one of the operations below. Note • Depending on the setting, the choices below may not be displayed. Print with the loaded paper. Select if you want to print/copy on the paper loaded without changing the paper settings.
• For more on the proper combination of paper settings you can specify by the printer driver (Windows) or on the touch screen: Paper Settings on the Printer Driver and the Printer (Media Type) Paper Settings on the Printer Driver and the Printer (Paper Size) Cancel Cancels printing. Select when you change the paper settings specified for printing/copying. Change the paper settings and try printing/copying again.
Copying Making Copies Reducing/Enlarging Copies Basics Two-Sided Copying Special Copy Menu Copying Using Smartphone or Tablet 301
Making Copies This section describes the procedure to copy with Standard copy. 1. Check that printer is turned on. 2. Load paper. 3. Select Copy on the HOME screen. Using the Operation Panel 4. Select Standard copy. The Copy standby screen is displayed. 5. Load original on platen. 6. Specify settings as necessary. A: The copy layout is displayed. Switch the layout from (single-sided), (2-on-1), B: Specify the number of copies. 302 (two-sided).
Tap or to specify the number of copies. If you keep touching here, the number scrolls by 10. You can also flick the number to specify. C: Display the print setting items. For more on the setting items: Setting Items for Copying D: Specify the page size and the media type. 7. Press Color button for color copying, or Black button for black & white copying. The printer starts copying. Remove the original on the platen after copying is complete.
Load the original on the platen and press the same button (the Color button or the Black button) as the one which you previously pressed. Important • When you load the original on the platen, move the document cover gently. Note • When Print qlty (print quality) is set High, you cannot add the copying job. • When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.
Setting Items for Copying You can change the copy settings such as magnification and intensity. Print Settings Screen Note • For more on the print settings screen or the setting item for Photo copy, see Copying Photos. The following screen is displayed by selecting Settings in the Copy standby screen. Example in Standard copy: Preview When Preview is displayed on the print settings screen, selecting Preview allows you to preview an image of the printout on the preview screen. For details, see below.
The setting item which cannot be selected is displayed grayed out. For more on the setting items for Photo copy, see Copying Photos. • Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, screen. In this case, select change the setting. appears on the touch on the upper left on the touch screen to check the message and • The settings of the page size, media type, etc.
• Print qlty (Print quality) Adjust print quality according to the original. Important • If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again. • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white. • Layout Select the layout.
Scanning Scanning from Computer (macOS) Scanning from Computer (Windows) Scanning from Operation Panel Scanning Using Smartphone/Tablet 308
Scanning from Computer (Windows) Scanning According to Item Type or Purpose (IJ Scan Utility) IJ Scan Utility Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Creating/Editing PDF Files Setting Passwords for PDF Files Editing Password-Protected PDF Files Scanning Using Application Software (ScanGear) Scanning Tips Positioning Originals (Scanning from Computer) Network Scan Settings IJ Network Scanner Selector EX2 Menu and Setting Screen 309
Scanning According to Item Type or Purpose (IJ Scan Utility) IJ Scan Utility Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Creating/Editing PDF Files Setting Passwords for PDF Files Editing Password-Protected PDF Files 310
IJ Scan Utility Features Use IJ Scan Utility to scan and save documents, photos, or other items at one time by simply clicking the corresponding icon. Multiple Scanning Modes Auto allows for one click scanning with default settings for various items. Document will sharpen text in a document or magazine for better readability, and Photo is best suited for scanning photos. Note • For details on the IJ Scan Utility main screen, see IJ Scan Utility Main Screen.
Note • To set the applications to integrate with, see Settings Dialog Box.
Scanning Easily (Auto Scan) Auto Scan allows for automatic detection of the type of the item placed on the platen. Important • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (scan areas) in whole image view of ScanGear (scanner driver), and then scan again. • • • • Photos with a whitish background Items printed on white paper, hand-written text, business cards, and other unclear items Thin items Thick items 1. Make sure scanner or printer is turned on.
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. Save documents in formats such as PDF and JPEG, and photos in formats such as JPEG and TIFF. 1. Place the Item on the Platen Positioning Originals (Scanning from Computer) 2. Start IJ Scan Utility. 3. To specify the paper size, resolution, PDF settings, etc., click Settings..., and then set each item in the Settings dialog box.
Creating/Editing PDF Files You can create PDF files by scanning items placed on the platen. Add, delete, rearrange pages or make other edits in the created PDF files. Important • You can create or edit up to 100 pages of a PDF file at one time. • Only PDF files created or edited in IJ Scan Utility or IJ PDF Editor are supported. PDF files created or edited in other applications are not supported. Note • • • • You can also create PDF files from images saved on a computer.
5. Click (Scan) on Toolbar. Scanning starts. Note • To open a file saved on the computer, click Open... from the File menu, and then select the file you want to edit. • You can switch the view with the Toolbar buttons. For details, see PDF Edit Screen. 6. Add pages as needed. When scanning and adding more items: Place items, and then click (Scan) on the Toolbar. When adding existing images or PDF files: Click (Add Page) on the Toolbar.
When deleting pages: Click the page you want to delete, and then click (Delete Page) on the Toolbar. Note • These buttons appear when two or more pages have been created. 8. Select Save As... in File menu. The Save dialog box appears. 9. Specify save settings. Save Dialog Box (PDF Edit Screen) 10. Click Save. The PDF file is saved. Note • When a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords in the Save dialog box.
Scanning Using Application Software (ScanGear) What Is ScanGear (Scanner Driver)? Starting ScanGear (Scanner Driver) Scanning in Basic Mode ScanGear (Scanner Driver) Screens General Notes (Scanner Driver) Important • Available functions and settings vary depending on your scanner or printer.
What Is ScanGear (Scanner Driver)? ScanGear (scanner driver) is software required for scanning documents. Use the software to specify the output size, image corrections, and other settings. ScanGear can be started from IJ Scan Utility or applications that are compatible with the standard TWAIN interface. (ScanGear is a TWAIN-compatible driver.) Features Specify the document type, output size, and other settings when scanning documents and preview scan results.
Advanced Mode Use the Advanced Mode tab to scan by specifying the color mode, output resolution, image brightness, color tone, and other settings.
Starting ScanGear (Scanner Driver) Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. Start ScanGear from IJ Scan Utility or other applications. Note • If you have more than one scanner or have a network compatible model and changed the connection from USB connection to network connection, set up the network environment. Starting from IJ Scan Utility 1. Start IJ Scan Utility.
Scanning in Basic Mode Use the Basic Mode tab to scan easily by following these simple on-screen steps. To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time with ScanGear (Scanner Driver). When scanning from the ADF (Auto Document Feeder), preview is not available. Important • The following types of documents may not be scanned correctly. In that case, click on the Toolbar to switch to whole image view and scan.
Important • Some applications do not support continuous scanning from the ADF. For details, see the application's manual. Note • To scan magazines containing many color photos, select Magazine (Color). 3. Click Preview. Preview image appears in the Preview area. Important • Preview is not available when scanning from the ADF. Note • Colors are adjusted based on the document type selected in Select Source. 4. Set Destination. Note • Skip ahead to Step 7 if an ADF option is selected in Select Source.
7. Set Image corrections as needed. 8. Click Scan. Scanning starts. Note • Click (Information) to display a dialog box showing the document type and other details of the current scan settings. • How ScanGear behaves after scanning is complete can be set from Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
ScanGear (Scanner Driver) Screens Basic Mode Tab Advanced Mode Tab 325
Basic Mode Tab Use the Basic Mode tab to scan easily by following these simple on-screen steps. This section describes the settings and functions available on the Basic Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note • The displayed items vary by document type and view. • Preview is not available when scanning from the ADF (Auto Document Feeder). (1) Settings and Operation Buttons Select Source Photo (Color) Scan color photos. Magazine (Color) Scan color magazines.
Document (Color) ADF Duplex (only for models supporting ADF duplex scanning) Scan both sides of documents from the ADF in color. Document (Grayscale) ADF Duplex (only for models supporting ADF duplex scanning) Scan both sides of documents from the ADF in black and white. Important • Some applications do not support continuous scanning from the ADF. For details, see the application's manual. Note • When you select a document type, the unsharp mask function will be active.
"OCR software" is software that converts text scanned as an image into text data that can be edited in word processors and other programs. Output Size Select an output size. Output size options vary by the item selected in Destination. Flexible Adjust the cropping frames (scan areas) freely. In thumbnail view: Drag the mouse over a thumbnail to display a cropping frame. When a cropping frame is displayed, the portion within the cropping frame will be scanned.
Deleting: Select the output size you want to delete in Output Size List, and then click Delete. Click Save to save the items listed in Output Size List. Important • Predefined output sizes such as A4 and 1024 x 768 pixels cannot be deleted. Note • Save up to 10 items. • An error message appears when you enter a value outside the setting range. Enter a value within the setting range.
Reduce gutter shadow Corrects shadows that appear between pages when scanning open booklets. Important • Be sure to see Gutter Shadow Correction for precautions and other information on using this function. Color Pattern... Adjust the image's overall color. Correct colors that have faded due to colorcast or other reasons and reproduce natural colors while previewing color changes.
• The image returns to its original state when you preview again. (Rotate Right) Rotates the preview image 90 degrees clockwise. • The result will be reflected in the scanned image. • The image returns to its original state when you preview again. (Auto Crop) Displays and adjusts the cropping frame automatically to the size of the document displayed in the Preview area. The scan area is reduced every time you click this button if there are croppable areas within the cropping frame.
When (Thumbnail) is displayed on Toolbar: Cropping frames are specified according to the document size, and thumbnails of scanned images appear. Only the images with the checkbox selected will be scanned. Note • When multiple images are previewed, different outlines indicate different selection status. • Focus Frame (thick blue outline): The displayed settings will be applied. • Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected Frames simultaneously.
Note • Create cropping frame(s) on the displayed image. In thumbnail view, one cropping frame can be created per image. In whole image view, multiple cropping frames can be created.
Advanced Mode Tab This mode allows you to make advanced scan settings such as the color mode, output resolution, image brightness, and color tone. This section describes the settings and functions available on the Advanced Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note • The displayed items vary by document type and view. • The preview function is not available when scanning from the ADF (Auto Document Feeder).
Enter Setting Name and click Add; the name appears in Favorite Settings List. When you click Save, the item appears in the Favorite Settings list and can be selected, along with the predefined items. To delete an item, select it in Favorite Settings List and click Delete. Click Save to save the settings displayed in Favorite Settings List. Note • You can set Add/Delete... in Favorite Settings after preview. • Save up to 10 items. Input Settings Specify the input settings such as the document type and size.
Note • Zoom rescans the document and displays high-resolution image in Preview. • (Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the resolution of the displayed image will be low. Preview Performs a trial scan. Scan Starts scanning. Note • When scanning starts, the progress appears. To cancel the scan, click Cancel. • When scanning is completed, a dialog box prompting you to select the next action may appear. Follow the prompt to complete.
In thumbnail view: In whole image view: (Thumbnail) / (Whole Image) Switches the view in the Preview area. (3) Preview Area (Clear) Deletes the preview image from the Preview area. It also resets the Toolbar and color adjustment settings. (Crop) Allows you to specify the scan area by dragging the mouse. (Move Image) Allows you to drag the image until the part you want to see is displayed when an image enlarged in the Preview area does not fit in the screen.
(Uncheck All Frames) Available when two or more frames are displayed. Deselects the checkboxes of the images in thumbnail view. (Select All Frames) Available when two or more frames are displayed. Selects the images in thumbnail view and outlines them in blue. (Select All Cropping Frames) Available when two or more cropping frames are specified. Turns the cropping frames into thick broken lines and applies the settings to all of them. (Remove Cropping Frame) Removes the selected cropping frame.
Note • When multiple images are previewed, different outlines indicate different selection status. • Focus Frame (thick blue outline): The displayed settings will be applied. • Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected Frames simultaneously. To select multiple images, click them while pressing the Ctrl key. • Unselected (no outline): The settings will not be applied.
General Notes (Scanner Driver) ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it. Scanner Driver Restrictions • When using the NTFS file system, the TWAIN data source may not be invoked. This is because the TWAIN module cannot be written to the winnt folder for security reasons. Contact the computer's administrator for help. • Some computers (including laptops) connected to the machine may not resume correctly from standby mode.
• Images may not be scanned correctly in some applications. In that case, increase the operating system's virtual memory and retry. • When image size is too large (such as when scanning large images at high resolution), your computer may not respond or the progress bar may remain at 0 % depending on the application. In that case, cancel the action (for example by clicking Cancel on the progress bar), then increase the operating system's virtual memory or reduce the image size/resolution and retry.
Scanning Tips Positioning Originals (Scanning from Computer) Network Scan Settings IJ Network Scanner Selector EX2 Menu and Setting Screen 342
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen for scanning. If items are not placed correctly they may not be scanned correctly. Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break. • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass. • Do not put any pressure of 4.4 lb (2.
Important Important • Large items (such as A4 size photos) that cannot be placed away from the edges/arrow (alignment mark) of the platen may be saved as PDF files. To save in a format other than PDF, scan by specifying the data format. Multiple items: Allow 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen and items, and between items. Portions placed on the diagonally striped area cannot be scanned. : 0.4 inch (1 cm) or more Note • Place up to 12 items.
Network Scan Settings You can connect your scanner or printer to a network to share it among multiple computers or scan images into a specified computer. Important • Multiple users cannot scan at the same time. Note • Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or by following the instructions our website. • With network connection, scanning takes longer than USB connection. Complete the following settings to enable scanning over a network.
If IJ Network Scanner Selector EX2 is not displayed on the Start screen, select the Search charm, then search for "IJ Network Scanner Selector EX2". • Windows 7: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX2 > IJ Network Scanner Selector EX2. The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3. 2.
Select the scanner you want to use and click OK. 5. In the Settings (General Settings) dialog box, click OK. The IJ Scan Utility main screen reappears. You can scan via a network connection. Setting for Scanning from the Operation Panel You can make the setting for scanning from the operation panel. Important • Set IJ Scan Utility to use your scanner or printer via a network connection beforehand. Setting for Scanning with IJ Scan Utility 1. Check that IJ Network Scanner Selector EX is running.
4. Select your scanner or printer from Scanners and click OK. Select the MAC address of your scanner or printer. Note • When multiple scanners are connected via a network, you can select up to three scanners. 5. In the Scan-from-PC Settings screen, click OK. Note • If your scanner or printer does not appear, check the following, click OK to close the screen, then reopen it and try selecting again.
Scanning Using Smartphone/Tablet Using PIXMA/MAXIFY Cloud Link Printing/Scanning with Wireless Direct 349
Frequently Asked Questions Network Cannot Find Printer on Network Cannot Find Printer while Using Wi-Fi Network Key (Password) Unknown Cannot Print or Connect For other questions about network, click here.
Scanning Problems (macOS) Scan Results Are Unsatisfactory (Windows) Scan Results Are Unsatisfactory (macOS) Cannot Print/Scan from Smartphone/Tablet Cannot Set Correctly (Network) Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Find Printer while Using Wi-Fi Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Forgot Administrator Password of Printer Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings Message Appears
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use.
Printing/Scanning from Smartphone/Tablet Connecting Printer and Wireless Router Using Easy wireless connect Cannot Connect Smartphone/Tablet to Wireless Router Checking Wireless Router Network Name (SSID) for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet Cannot Find Printer from Smartphone/Tablet while Using Bluetooth Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printer Prints Slowly No Ink Level A
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems 354
Cannot Find Printer on Network While performing printer setup: Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen While using printer: Cannot Find Printer while Using Wi-Fi 355
Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) If the printer cannot be found and the Check Printer Settings screen appears after searching the printer by Automatic search on the Search for Printers screen, click Redetect and search for the printer again by the IP address on the Search for Printers screen. If the printer has not been found after searching it by the IP address, check network settings.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Power Status Are printer and network device (router, etc.) turned on? Make sure the printer is turned on. Checking that Power Is On Make sure network device (router, etc.) is turned on. If printer or network device is off: Turn on printer or network device. It may take a while for the printer and network device to become ready for use once they are turned on.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network. If you cannot view any web pages: Click Cancel on the Check Printer Settings screen to cancel to set up the network communication. After that, configure the computer and network device.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's Wi-Fi Settings Is printer set to allow wireless communication? Make sure the or icon is displayed on the touch screen. If icon is not displayed: The printer is not set to allow wireless communication. Turn on wireless communication on the printer.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wi-Fi Environment Is the printer connected to the wireless router? Use the icon on the touch screen to make sure the printer is connected to the wireless router. If is displayed: • Check wireless router configuration. After checking the wireless router setting, make sure the printer is not placed far away from the wireless router. The printer can be up to 50 m (164 ft) from the wireless router indoors.
Important • Note that some wireless routers distinguish network names (SSIDs) by the last alphanumeric character according to their bandwidth (2.4 GHz or 5 GHz) or purpose (for computer or game machine). Check the network name (SSID) of the wireless router for the printer on the touch screen. Select (Setup) icon, Device settings, LAN settings, and Wi-Fi, and then check Network name (SSID). Note • You can also check Network name (SSID) by selecting the icon on the lower left and selecting Wi-Fi.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device. To check the printer's IP address, print out the network settings information or use the operation panel to display it. • Display on the touch screen. LAN settings • Print the network settings.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Security Software Settings Disable block in firewall function temporarily. The firewall of your security software or operation system for computer may limit communication between the printer and your computer. Check the firewall setting of your security software or operation system or the message shown on your computer and disable block temporarily.
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wireless Router Settings Check wireless router settings. Check wireless router network connection settings, such as IP address filtering, MAC address filtering, encryption key, and DHCP function. Make sure the same radio channel is assigned to the printer and the wireless router. To check the settings of the wireless router, see the instruction manual supplied with the wireless router or contact the manufacturer.
Cannot Proceed beyond Printer Connection Screen If you cannot proceed beyond the Printer Connection screen, check the following. Check1 Make sure USB cable is securely plugged in to printer and computer. Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer. Important • Connect the "Type-B" terminal to the printer with the notched side facing UP. For details, refer to the instruction manual supplied with the USB cable.
4. Turn off printer. 5. Restart computer. 6. Make sure you have no application software running. 7. Perform setup on web page. Note • You can use the Setup CD-ROM to redo setup. • For macOS: 1. Click Next. The screen telling you that installation has not been completed appears. 2. Click No. The screen to select application software to install appears. 3. Click Back to Top. 4. Click Exit on Start Setup screen. 5. Turn off printer. 6. Restart computer. 7.
Cannot Find Printer while Using Wi-Fi Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Check the Check2 If the (Network status) icon on the touch screen. icon is displayed, or only the icon is displayed, wireless LAN is disabled.
Note • Use 2.4 GHz frequency band to connect to a wireless router. Match the network name (SSID) set for the printer with that for 2.4 GHz frequency band of the wireless router. To check the network name (SSID) set for the printer, print out the network setting information. Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Starting Up IJ Network Device Setup Utility • For macOS: Starting Up IJ Network Device Setup Utility Check7 Make sure the computer is connected to the wireless router. For more on how to check the computer settings or connection status, see your computer instruction manual or contact its manufacturer. Note • If you use a smartphone or tablet, make sure the Wi-Fi is enabled on the device.
Network Connection Problems Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings 370
Printer Suddenly Stopped Working for Some Reason Cannot Connect to a Printer after Network Configuration Changes Cannot Connect to a Printer via Wireless LAN (Wi-Fi) Cannot Connect to a Printer through Wireless Direct Cannot Print/Scan through Network Cannot Connect to a Printer after Network Configuration Changes It may take a while for the computer to obtain an IP address, or you may need to restart your computer. Make sure the computer has obtained a valid IP address, and try again to find the printer.
To check the settings of the wireless router, refer to the instruction manual provided with it or contact its manufacturer. Note • Use 2.4 GHz frequency band to connect to a wireless router. Match the network name (SSID) set for the printer with that for 2.4 GHz frequency band of the wireless router. To check the current network settings of the printer, print out the network setting information.
See below for starting up IJ Network Device Setup Utility. • For Windows: Starting Up IJ Network Device Setup Utility • For macOS: Starting Up IJ Network Device Setup Utility Check7 Make sure of the Wi-Fi channel numbers used for your computer. You need to have the same Wi-Fi channel number that you are using for the wireless router as your computer. It is normally set in the way that you can use all the Wi-Fi channels.
Turn on the printer or devices. If the power is already turned on, cycle the power switch. Check2 Is the icon displayed on the touch screen? If not, Wireless Direct is disabled. Turn on Wireless Direct. Check3 Check the settings of your device (smartphone/tablet). Make sure Wi-Fi is enabled on your device. For details, refer to your device's instruction manual. Check4 Make sure printer is selected as connection for device (e.g. smartphone or tablet).
Cannot Print/Scan through Network Check1 Make sure the computer is connected to the wireless router. For more on how to check the computer settings or connection status, see your computer instruction manual or contact its manufacturer. Check2 If MP Drivers are not installed, install them. (Windows) Install the MP Drivers using the Setup CD-ROM or install them from the Canon website. Check3 Make sure wireless router does not restrict which computers can access it.
Network Key (Password) Unknown WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect Setting an Encryption Key WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect For more on setting up a wireless router, see the instruction manual provided with the wireless router or contact its manufacturer. Make sure your computer can communicate with the wireless router. Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status.
Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router is compatible with WPA/WPA2, you can also use WPA2 or WPA. • Using WPA/WPA2 (Windows) The authentication method, Wi-Fi password, and dynamic encryption type must be identical among the wireless router, the printer, and your computer. Enter the Wi-Fi password configured on the wireless router. Either TKIP (basic encryption) or AES (secure encryption) is selected automatically as the dynamic encryption method.
Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings When you replace a wireless router, redo the network setup for the printer according to the replaced one. • For Windows: Perform setup using the Setup CD-ROM or from the web page. • For macOS: Perform setup from the web page. Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
If filtering MAC addresses or IP addresses at wireless router, check that MAC addresses or IP addresses for computer, network device, and printer are registered. Check2 Check3 If using WPA/WPA2 key or a password, make sure encryption key for computer, network device, and printer matches key set for wireless router. The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer. For details, see Setting an Encryption Key.
Other Network Problems Checking Network Information Restoring to Factory Defaults 380
Checking Network Information Checking Printer IP Address or MAC Address Checking Computer IP Address or MAC Address Checking Communication Between the Computer, the Printer, and the Wireless Router Checking Network Setting Information Checking Printer IP Address or MAC Address To check the printer's IP Address or MAC address, print out the network settings information or use the operation panel to display it. • Display on the touch screen. LAN settings • Print the network settings.
2. Make sure network interface used by computer is selected, and then click Advanced. Make sure Wi-Fi is selected as network interface. 3. Click TCP/IP to check the IP address, or click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1. Select Command Prompt as shown below. In Windows 10, right-click Start and select Command Prompt. In Windows 8.
"XXX.XXX.XXX.XXX" is the IP address of the target device. A message such as the following appears. 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms --- XXX.XXX.XXX.XXX ping statistics --3 packets transmitted, 3 packets received, 0% packet loss If packet loss is 100%, communication is not taking place. Otherwise, computer is communicating with target device.
Restoring to Factory Defaults Important • For Windows: Initialization erases all network settings on the printer, making printing or scanning operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, redo setup using the Setup CD-ROM or from the web page. • For macOS: Initialization erases all network settings on the printer, making printing or scanning operation from a computer over a network impossible.
Problems while Printing/Scanning from Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet 385
Cannot Print/Scan from Smartphone/Tablet If you cannot print/scan from your smartphone/tablet, it is possible that your smartphone/tablet cannot communicate with the printer. Check the cause of your problem according to the connection method.
To check the settings of the wireless router, refer to the instruction manual provided with it or contact its manufacturer. To check the current network settings of the printer, print out the network setting information. Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Printing Network Settings Check5 Have you entered the proper password specified for the Wireless Direct? To check the password specified for the printer, display it using the operation panel of the printer or print out the network setting information of the printer. • Display on the touch screen. LAN settings • Print the network settings. Printing Network Settings Check6 Make sure the printer is not placed too far away from the device.
Printing Problems Printer Does Not Print Ink Does Not Come Out Paper Does Not Feed Properly/"No Paper" Error Printout Results Are Unsatisfactory 390
Printer Does Not Print Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Note • If you are printing large data such as photos or other graphics, printing may take longer to start. The ON lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.
Changing the Printer Operation Mode (macOS) Check4 If printing from a computer, delete jobs stuck in print queue. • For Windows: Deleting the Undesired Print Job • For macOS: Deleting the Undesired Print Job Check5 Is your printer's printer driver selected when printing? The printer will not print properly if you are using a printer driver for a different printer. • For Windows: Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box.
Ink Does Not Come Out Check1 Make sure of the estimated ink levels in the ink tanks. Check the ink status on the touch screen. Checking Ink Status on the Touch Screen Check2 Are the orange tape and plastic wrap still on the ink tank? Make sure all the protective plastic wrap is peeled off to expose the Y-vent area, as shown below (A). If the orange tape remains on the ink tank (B), peel it off.
Paper Does Not Feed Properly/"No Paper" Error Check1 Make sure paper is loaded. Loading Paper Check2 When loading paper, consider the following. • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. • When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load limit.
If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object. Note • If the feed slot cover is opened, close it slowly. Check7 Clean paper feed roller. Cleaning Paper Feed Rollers Note • Cleaning the paper feed roller abrades it, so do this only when necessary.
Printout Results Are Unsatisfactory If the print results are unsatisfactory due to white streaks, misaligned/distorted lines, or uneven colors, check the paper and print quality settings first. Do page size and media type settings match size and type of loaded paper? Check1 If these settings do not match, it is not possible to obtain the proper result. If you are printing a photograph or an illustration, an incorrect paper type setting may reduce the quality of the printout color.
Check3 If problem is not resolved, check also the sections below.
Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/ Streaks or Lines Printing Is Blurry Colors Are Wrong 398
White Streaks Appear Check1 Check paper and print quality settings. Printout Results Are Unsatisfactory Check2 Check status of ink tanks. Replace ink tank if ink has run out. Replacing Ink Tanks Check3 Are the orange tape and plastic wrap still on the ink tank? Make sure all the protective plastic wrap is peeled off to expose the Y-vent area, as shown below (A). If the orange tape remains on the ink tank (B), peel it off.
Perform print head deep cleaning. If the problem is not resolved after performing print head deep cleaning, turn off the printer and perform print head deep cleaning again 24 hours later. • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair.
Lines Are Misaligned/Distorted Check1 Check paper and print quality settings. Printout Results Are Unsatisfactory Check2 Perform print head alignment. If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note • If the problem is not resolved after performing the print head alignment, perform print head alignment manually from your computer.
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check1 Check paper and print quality settings. Printout Results Are Unsatisfactory Check2 Check paper type. Make sure you are using the right paper for what you are printing. Supported Media Types Check3 Correct curl before loading paper. When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is.
1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.
1. Check that printer is turned on. 2. Open Canon IJ Printer Assistant Tool. Maintenance Tab Description 3. Select Select Printer... and select printer you are using from pulldown menu and select OK. 4. Select Custom Settings. 5. Select Prevent paper abrasion check box and click OK. ◦ For macOS: Adjust the setting to prevent paper abrasion from Remote UI. Opening Remote UI for Maintenance If intensity is set high, reduce intensity setting and try printing again.
Note • To prevent staining inside the printer, be sure to set the correct paper size. Check9 Set longer ink drying time. This allows the printed surface to dry, preventing smudges and scratches. • For Windows: 1. Check that printer is turned on. 2. Open Canon IJ Printer Assistant Tool. Maintenance Tab Description 3. Select Select Printer... and select printer you are using from pulldown menu and select OK. 4. Select Custom Settings. 5.
Vertical Line Next to Image Check Is loaded paper size correct? If the loaded paper is larger than the size you specified, a vertical line may appear in the margin. Set the paper size to match the loaded paper. Printout Results Are Unsatisfactory Note • The direction of the vertical line pattern may vary depending on the image data or the print setting. • This printer performs automatic cleaning when necessary to keep printouts clean. A small amount of ink is ejected for cleaning.
Scanning Problems (Windows) Scanning Problems 407
Scanning Problems Scanner Does Not Work ScanGear (Scanner Driver) Does Not Start 408
Scanner Does Not Work Check 1 Make sure that your scanner or printer is turned on. Check 2 Connect the USB cable to a different USB port on the computer. If the USB cable is connected to a USB hub, remove it from the USB hub and connect it to a USB port on the computer. Check 3 Check 4 With network connection, check the connection status and reconnect as needed. Check 5 Restart the computer.
ScanGear (Scanner Driver) Does Not Start Check 1 Make sure MP Drivers is installed. If not installed, install MP Drivers from the Setup CD-ROM or our website. Check 2 Select your scanner or printer on the application's menu. Important • If your scanner or printer name is displayed multiple times, select the one that does not include WIA. Note • The operation may differ depending on the application. • Use the WIA driver when scanning from a WIA-compliant application.
Mechanical Problems Printer Does Not Turn On Printer Turns Off Unexpectedly or Repeatedly USB Connection Problems Cannot Communicate with Printer via USB Wrong Language Appears in Touch Screen 411
Printer Does Not Turn On Check1 Press ON button. Check2 Make sure power plug is securely connected to printer, and then turn on again. Check3 Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn on again. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Printer Turns Off Unexpectedly or Repeatedly Check If printer is set to turn off automatically after a certain time, disable this setting. If you have set the printer to turn off automatically after a specified time, the power will shut off by itself once that time has elapsed. • To disable the setting from the operation panel: 1. Check that printer is turned on. 2. Select (Setup) on Home screen. 3. Select ECO. 4. Select Energy saving settings. 5. Check displayed message and select Next. 6.
4. Select Disable for Auto Power Off. 5. Select OK. 6. Select OK on the displayed screen. The setting to shut off the power automatically is disabled. Note • Refer to below to disable the setting from ScanGear (scanner driver).
USB Connection Problems Printing or Scanning Is Slow/Hi-Speed USB Connection Does Not Work/"This device can perform faster" Message Appears (Windows) If your system environment does not support Hi-Speed USB, the printer operates at the slower speed of USB 1.1. In this case, the printer works properly but printing or scanning speed may slow down due to the communication speed. Check Check following to make sure your system environment supports Hi-Speed USB connection.
Cannot Communicate with Printer via USB Check1 Make sure printer is turned on. Check2 Connect USB cable properly. As the illustration below, the USB port is at the back of the printer. Important • Connect the "Type-B" terminal to the printer with the notched side facing UP. For details, refer to the instruction manual supplied with the USB cable. Make sure Enable bidirectional support is selected in the Ports sheet of the properties dialog box of the printer driver.
Wrong Language Appears in Touch Screen Follow the instructions below to select your language. 1. Press HOME button and wait a little. 2. Select (Setup) icon. Using the Operation Panel 3. Select . 4. Select sixth setting item from top. 5. Select a language for touch screen. 6. Select button on lower left.
Installation and Download Problems Failed to MP Drivers Installation (Windows) Updating MP Drivers in Network Environment (Windows) 418
Failed to MP Drivers Installation (Windows) • If installation does not start when you insert Setup CD-ROM: Follow the instructions below to start the installation. 1. Make the following settings. ◦ In Windows 10, click Start > File Explorer, and then click This PC from list on left. ◦ In Windows 8.1, select Explorer icon in Taskbar on Desktop, and then select This PC from list on left. ◦ In Windows 7, click Start, and then click Computer. 2. Double-click the CD-ROM icon in the window that appears.
• If you cannot get past the Printer Connection screen: Cannot Proceed beyond Printer Connection Screen • Other cases: Reinstall the MP Drivers. If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers. Deleting the Unnecessary MP Drivers Reinstall the MP Drivers with the Setup CD-ROM or install them from the Canon website.
Updating MP Drivers in Network Environment (Windows) Download the latest MP Drivers. Download the latest MP Drivers for your model on the download page of the Canon website. Uninstall the existing MP Drivers and follow the installation instructions to install the latest MP Drivers that you downloaded. In the connection method selection screen, select Use the printer with Wi-Fi connection. The printer is detected automatically in the network.
Errors and Messages An Error Occurs Message (Support Code) Appears 422
An Error Occurs If an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appears automatically. Take the appropriate action described in the message. When an error occurs, a message appears on the computer, or an error code appears on the printer. For some errors, a support code (error number) appears on the computer screen.
Message (Support Code) Appears This section describes some of the errors and messages that may appear. Note • A support code (error number) is displayed on the computer for some errors. For details on errors that have support code, see List of Support Code for Error. If a message appears on the touch screen, see below. Message Appears on Touch Screen If a message appears on the computer, see below.
Error Regarding Power Cord Being Unplugged Is Displayed (Windows) The printer may have been unplugged while it was on. Check the error message that appears on the computer and click OK. The printer starts printing. See Unplugging the Printer for unplugging the power cord. Writing Error/Output Error/Communication Error (Windows) Check1 If the ON lamp is off, make sure printer is plugged in and turn on. The ON lamp flashes while the printer is initializing.
3. Click General tab and check for a device problem. If a device error is shown, see Windows Help to resolve it. Other Error Messages (Windows) Check If an error message appears outside printer status monitor, check the following: • "Could not spool successfully due to insufficient disk space" Delete any unnecessary files to increase the amount of free space on the disk. • "Could not spool successfully due to insufficient memory" Close other applications to increase the available memory.
List of Support Code for Error Support code appears on the touch screen and your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code displayed on the touch screen and computer screen and take the appropriate action in response.
• 6000 to 6ZZZ 6000 6001 6004 6500 6502 6800 6801 6830 6831 6832 6833 6900 6901 6902 6910 6911 6930 6931 6932 6933 6936 6937 6938 6940 6941 6942 6943 6944 6945 6946 6951 6A80 6A81 6D01 • 7000 to 7ZZZ 7500 7600 7700 7800 • 8000 to 8ZZZ 8300 • A000 to ZZZZ C000 For paper jam support codes, see also List of Support Code for Error (Paper Jams).
List of Support Code for Error (Paper Jams) If paper jams, remove it following the appropriate procedure as shown below.
1300 Cause Paper is jammed when feeding paper from rear tray. What to Do If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from the rear tray following the instructions below. 1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier. Hold the paper with both hands, and pull it out slowly so as not to tear it. Note • If you cannot pull out the paper, turn the printer back on without pulling forcibly.
Note • When reloading the paper, make sure you are using suitable paper and loading it correctly. • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
1303 Cause Paper is jammed when feeding paper from cassette. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer • If the paper is jammed at the feeder of the cassette: Pull out the cassette, and then remove the paper slowly with both hands. • If none of the above is applied, see Removing Jammed Paper from Rear Side to open the rear cover and to remove the paper. 2.
1304 Cause Paper is jammed when performing automatic duplex printing. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer • If the paper is jammed at the feeder of the cassette: Pull out the cassette, and then remove the paper slowly with both hands. • If none of the above is applied, see Removing Jammed Paper from Rear Side to open the rear cover and to remove the paper. 2.
1313 Cause Paper is jammed as printer pulled in printed paper. What to Do If the paper is jammed as the printer pulled in the printed paper, try to remove the paper from the following locations. • Paper output slot 1300 • Inside of the printer Paper Is Jammed inside Printer If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open the rear cover and to remove the paper.
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper from the paper output slot, or if the jammed paper remains inside the printer, remove the paper following the instructions below. Note • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the Stop button to stop the printing before you turn off the printer. 1. Turn off printer and unplug it. 2. Open scanning unit / cover. Important • Do not touch white belt (A).
4. Hold jammed paper firmly in both hands. If the paper is rolled up, pull out it. 5. Slowly pull out paper, so as not to tear it. Pull out the paper at an angle of about 45 degrees.
6. Make sure all jammed paper is removed. If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and remove any remaining paper. • Any paper left under the print head holder? • Any small bits of paper left in the printer? • Any paper left in the left and right empty spaces (B) in the printer? 7. Close scanning unit / cover. To close the scanning unit / cover, hold it up once, and then take it down gently. All jobs in the print queue are canceled.
Removing Jammed Paper from Rear Side Note • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the Stop button to stop the printing before you turn off the printer. 1. Rotate printer so that rear side of printer faces toward you. 2. Open rear tray cover and then pull up paper support. 3. Detach rear cover. Pull out the rear cover.
4. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1. Detach transport unit cover. Lift up the transport unit cover and pull out it.
2. Slowly pull out paper. Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover.
5. Attach rear cover. Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. • Align the paper guides with the both edges of the paper when you load paper in the rear tray. • Set paper information for the paper in the rear tray. Loading Paper in the Rear Tray After carrying out the above measures, select OK on the touch screen.
1003 Cause Possible causes include the following. • There is no paper in the cassette. • Paper is not loaded in the cassette properly. What to Do Take the corresponding actions below. • Load paper in the cassette. • Align the paper guides with the both edges of the paper when you load paper in the cassette. • Set paper information for the paper in the cassette. Loading Paper in the Cassette After carrying out the above measures, select OK on the touch screen.
1200 Cause Scanning unit / cover is open. What to Do Close the scanning unit / cover and wait for a while. Do not close it while you are replacing an ink tank.
1401 Cause Print head may be damaged. What to Do Turn off the printer and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
1600 Cause Ink may have run out. What to Do Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, tap OK on the printer with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition.
1660 Cause The ink tank cannot be recognized. What to Do Printing cannot be performed because the ink tank is not installed or is not compatible with this printer. Check the ink tank. If you want to cancel printing, press the printer's Stop button.
1688 Cause The ink has run out. What to Do Replace the ink tank and close the scanning unit / cover. Printing under the current condition may damage the printer. If you want to continue printing in this condition, you need to disable the function for detecting the remaining ink level. Press and hold the printer's Stop button for at least 5 seconds, and then release it. With this operation, disabling the function for detecting the remaining ink level is memorized.
1689 Cause Printer detected ink out condition. What to Do Replace the ink tank and close the scanning unit / cover. An ink tank that was once empty is installed. Printing under the ink out condition may damage the printer. If you want to continue printing, you need to disable the function for detecting the remaining ink level. To disable this function, press and hold the printer's Stop button for at least 5 seconds, and then release it.
1700 Cause Ink absorber is almost full. What to Do Select OK on the touch screen to continue printing. Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
1890 Cause Tape for securing print head holder during transportation may still be attached. What to Do Open the scanning unit / cover and make sure the tape for securing the print head holder during transportation has been removed. If the tape is still there, remove it and close the scanning unit / cover. If this does not solve the problem, contact your nearest Canon service center to request a repair.
2110 Cause Paper settings for printing or copying do not match cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the touch screen. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) • For copying, make the copy paper settings to match cassette paper information set on the printer.
Select the appropriate action. Note • Depending on settings, some of the options below may not appear. Print with the loaded paper. Select this option to print or copy onto the paper in the cassette without changing the paper settings. For example, if the print or copy paper setting is A5, and cassette paper information is set to A4, the A5 size setting is used to print or copy onto the paper in the cassette. Replace the paper and print Select this option to print after changing the paper in the cassette.
Feed settings • To change the message view setting when printing using the printer driver: Changing the Printer Operation Mode (Windows) Changing the Printer Operation Mode (macOS) 454
2900 Cause Scanning print head alignment sheet failed. What to Do Select OK on the printer's touch screen and check the following. • Make sure the print head alignment sheet is set in the correct position and orientation on the platen. • Make sure the platen and the print head alignment sheet are not dirty. • Make sure the loaded paper is correct. For print head alignment, load A4 or Letter-sized plain paper. • Make sure the print head nozzle is not clogged.
2901 Cause Print head alignment pattern has been printed and printer is waiting to scan sheet. What to Do Scan the printed alignment pattern. 1. Load print head alignment sheet on platen. Place the printed side down and align the mark alignment mark in the upper left corner of the sheet with the . 2. Slowly close the document cover and select OK on printer's touch screen. The printer starts scanning the print head alignment sheet, and automatically adjusts the print head position.
4103 Cause Cannot perform printing with current print settings. What to Do Press the printer's Stop button to cancel printing. Then change the print settings and retry printing.
5011 Cause Printer error has occurred. What to Do Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5012 Cause Printer error has occurred. What to Do Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5100 Cause Printer error has occurred. What to Do Cancel printing and turn off the printer. Check the following: • Make sure print head holder motion is not impeded by tapes for securing the print head holder during transportation, jammed paper, etc. Remove any impediment. • Make sure the ink tanks are properly installed. Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5200 Cause Printer error has occurred. What to Do Turn off printer and unplug it. After a while, plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5B00 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
6000 Cause Printer error has occurred. What to Do If the paper is jammed, remove it depending on the jammed location and cause. List of Support Code for Error (Paper Jams) Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
C000 Cause Printer error has occurred. What to Do Cancel printing and turn off the printer. Check the following: • Make sure print head holder motion is not impeded by tapes for securing the print head holder during transportation, jammed paper, etc. Remove any impediment. • Make sure the ink tanks are properly installed. Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
