TS8000 series Online Manual Overview Printing Copying Scanning Frequently Asked Questions English
Contents Using This Online Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Printing Photos from a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Copying. . . . . . . . . . . . . . . . . .
Checking the Ink Status with the Ink Lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 If Printing Is Faint or Uneven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Maintenance Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Managing the Printer Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Changing the Printer Operation Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Changing Settings from Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Changing Settings from Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paper Settings on the Printer Driver and the Printer (Media Type). . . . . . . . . . . . . . . . . . . . 206 Paper Settings on the Printer Driver and the Printer (Paper Size). . . . . . . . . . . . . . . . . . . . 207 Various Printing Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Setting the Number of Copies and Printing Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Execute Borderless Printing. . . .
What Is IJ Scan Utility (Scanner Software)?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271 Starting IJ Scan Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Using Auto Scan Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 IJ Scan Utility Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)Checking Printer's IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)Checking Security Software Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation and Download Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Cannot Install MP Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 Updating MP Drivers in Network Environment (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Errors and Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453 C000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using This Online Manual Symbols Used in This Document Touch-enabled Device Users (Windows) Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability.
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LEADTOOLS Copyright (C) 1991-2009 LEAD Technologies, Inc. CMap Resources ----------------------------------------------------------Copyright 1990-2009 Adobe Systems Incorporated. All rights reserved. Copyright 1990-2010 Adobe Systems Incorporated. All rights reserved.
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above c
Basic Operation Printing Photos from a Computer Copying Printing Photos Printing a Disc Label from a Computer Copying a Disc Label 20
Printing Photos from a Computer This section describes how to print photos with My Image Garden. 1. Open the rear tray cover (A) and then pull up the paper support (B). 2. Open the feed slot cover (C). 3. Load paper vertically WITH THE PRINT SIDE FACING UP. 4. Align the paper guides (D) with the paper width.
5. Close the feed slot cover (E) gently. After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the touch screen. 6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register.
7. Click the My Image Garden icon (F) in Quick Menu. The Guide Menu screen is displayed. Note • The number and types of icons displayed vary depending on your region, the registered printer/ scanner and the installed applications. 8. Click the Photo Print icon (G). 9. Click the folder (H) with photos you want to print. 10. Click the photos (I) you want to print. For Windows: To select two or more photos at a time, click photos while pressing the Ctrl key.
11. Click Print (J). 12. Specify the number of copies, your machine name, media type, etc. (K). 13. Click Print (L). For Mac OS: Click OK when the confirmation message appears, then click Print. The operation panel is opened and the paper output tray is pulled out automatically, then printing will start. Note • My Image Garden lets you use images on your computer, such as photos taken with a digital camera, in a number of ways.
My Image Garden Guide 25
Copying This section describes how to load originals and copy them to plain paper loaded in the cassette. 1. Pull out the cassette (A) from the printer. 2. Remove the cassette cover (B). 3. Load the paper stack WITH THE PRINT SIDE FACING DOWN.
Note • To load A4 or Letter-sized paper in the cassette, extend the cassette. 4. Align the paper guides (C) with the paper length and width. 5. Mount the cassette cover, and then insert the cassette into the printer.
After inserting the cassette into the printer, the paper information registration screen for the cassette is displayed on the touch screen. 6. Select the size of the loaded paper in the cassette at Page size, and then select Register. 7. Select Copy (D) on the HOME screen. 8. Select Standard copy. 9. Open the document cover (E). 10. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (F).
11. Close the document cover. 12. Confirm the paper settings, then press the Black button or Color button (G). The operation panel is opened and the paper output tray is pulled out automatically, then copying will start. Important • Do not open the document cover until copying is complete. Note • Your printer is equipped with many other convenient copy features.
Printing Photos This section describes how to print photos on a memory card. 1. Open the rear tray cover (A) and then pull up the paper support (B). 2. Open the feed slot cover (C). 3. Load paper vertically WITH THE PRINT SIDE FACING UP. 4. Align the paper guides (D) with the paper width.
5. Close the feed slot cover (E) gently. After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the LCD. 6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register.
7. Insert the memory card. * The figure below shows the SD/SDHC memory card as an example. Note • For details on inserting memory cards other than SD/SDHC, see below. Inserting the Memory Card 8. Flick right and left through the photos (F) and select one. 9. Confirm the paper settings, then touch the Color button (G). The operation panel is opened and the paper output tray is pulled out automatically, then printing will start. Important • Do not remove the memory card during printing.
Printing a Disc Label from a Computer This section describes how to print photos on a printable disc with My Image Garden. Important • Do not attach the disc tray until the message asking you to load the printable disc is displayed. Doing so can damage the printer. 1. Click the My Image Garden icon (A) in Quick Menu. The Guide Menu screen is displayed. Note • The number and types of icons displayed vary depending on your region, the registered printer/ scanner and the installed applications. 2.
4. Click OK (D). 5. When a dialog screen is displayed, click OK. 6. Click Add Image (E), then select photos to print onto the disc label. Note • The layout may not be as expected depending on the photo information or analysis results of the selected images. 7. Edit the disc label (F). You can change the background or add texts. • For Windows: My Image Garden Guide • For Mac OS: My Image Garden Guide 8. Click Print (G).
9. Specify the number of copies, your machine name, etc. (H). 10. Click the start button (I). For Mac OS, click OK when the confirmation message appears, then click Print. When the confirmation message appears again, click OK. 11. When the message asking you to load the printable disc is displayed, open the operation panel (J), and then pick out the disc tray from the disc tray storage compartment (K).
12. Place the printable disc with the printable surface facing up on the disc tray. 13. Insert the disc tray into the disc tray guide. Insert the disc tray straight until the white line on the disc tray guide is almost aligned with the arrow ( on the disc tray. 14. Start printing. For Windows, click Start Printing on the dialog screen. For Mac OS, tap OK on the touch screen. The disc tray is drawn into the printer, then printing will start.
• For Windows: My Image Garden Guide • For Mac OS: My Image Garden Guide 37
Copying a Disc Label This section describes how to copy the label of an existing disc (BD/DVD/CD, etc.) and print it on a printable disc. 1. Select Copy (A) on the HOME screen. 2. Select Disc label (B). 3. Specify the print area of the printable disc as necessary. Tap Outer circle or Inner circle (C), specify the print area, then tap OK (D).
4. Specify the amount of ink (E). If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink.. 5. Open the document cover (F). 6. Load the copy source (BD/DVD/CD, etc.) WITH ITS LABEL SIDE DOWN on the platen glass. 7. Close the document cover. 8. Select OK on the touch screen. 9. Confirm the print settings, then touch the Black button or Color button (G).
10. When the message asking you to load the printable disc is displayed, open the operation panel (H), and then pick out the disc tray from the disc tray storage compartment (I). 11. Place the printable disc with the printable surface facing up on the disc tray. 12. Insert the disc tray into the disc tray guide. Insert the disc tray straight until the white line on the disc tray guide is almost aligned with the arrow ( on the disc tray.
13. Select OK on the touch screen. The disc tray is drawn into the printer, then copying will start. After copying is complete, pull the disc tray out from the printer. Important • Do not open the document cover until copying is complete. Note • Your printer is equipped with many other disc label print features.
Handling Paper, Originals, Ink Tanks, Printable Disc, Memory Card, etc.
Loading Paper Paper Sources Loading Paper in the Rear Tray Loading Paper in the Cassette Loading Envelopes 43
Paper Sources The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B). The paper source used depends on the page size and media type. Supported Media Types Note • When printing, select the correct page size and media type. If you select the wrong page size or media type, the printer may feed paper from the wrong paper source or may not print with the proper print quality. For details on how to load paper in each paper source, see below.
Loading Paper in the Rear Tray You can load plain paper or photo paper. You can also load envelopes on the rear tray. Loading Envelopes Important • If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial print, it can cause paper jams. Note • We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Supported Media Types.
2. Open the feed slot cover (C). 3. Slide the paper guides to open them, and load the paper in the center of the rear tray WITH THE PRINT SIDE FACING UP. 4. Slide the paper guides (D) to align them with both sides of the paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Important • Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause paper jams. Note • Do not load sheets of paper higher than the load limit mark (G). 5. Close the feed slot cover (H) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the touch screen. 6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register. When printing starts, the operation panel is opened and the paper output tray is pulled out automatically. Note • When printing, select the size and type of the loaded paper on the print settings screen of the operation panel or printer driver.
Loading Paper in the Cassette You can load A4, B5, A5, or Letter-sized plain paper in the cassette. Note • In the cassette, be sure to load only plain paper. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types. 1. Prepare paper. Align the edges of paper. If paper is curled, flatten it. Note • Align the edges of paper neatly before loading.
3. Remove the cassette cover (B). 4. Slide the paper guide (C) in front and (D) on the right to open the guides. 5. Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of the cassette. Important • Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause paper jams. Note • Align the paper stack with the edge of the cassette as shown in the figure below.
• To load A4 or Letter-sized paper in the cassette, press down the lock (H) on the cassette, then extend the cassette. 6. Align the paper guide (I) in front with the paper stack. Align the paper guide (I) with where it clicks into place. 7. Slide the paper guide (J) on the right to align the right and left guides with both sides of the paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Push the cassette into the printer until it stops. After inserting the cassette into the printer, the paper information registration screen for the cassette is displayed on the touch screen. 9. Select the size and type of the loaded paper in the cassette at Page size, then select Register. When printing starts, the operation panel is opened and the paper output tray is pulled out automatically.
Loading Envelopes You can load Envelope DL and Envelope Com 10 on the rear tray. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from the operation panel or from a PictBridge (Wireless LAN) compliant device is not supported. • Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction.
2. Open the feed slot cover (C). 3. Slide the paper guides to open them, and load the envelopes in the center of the rear tray WITH THE PRINT SIDE FACING UP. Fold flap of the envelope and load the envelope in the portrait orientation with the address side facing up. Up to 10 envelopes can be loaded at once. 4. Slide the paper guides (D) to align them with both sides of the envelopes. Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly.
Note • Do not load envelopes higher than the load limit mark (E). 5. Close the feed slot cover (F) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the touch screen. 6. Select the size and type of the loaded envelopes in the rear tray at Page size and Type, and then select Register. When printing starts, the operation panel is opened and the paper output tray is pulled out automatically. Note • The printer may make operating noise when feeding envelopes.
Placing a Printable Disc Cautions When Printing on a Printable Disc Before Placing a Printable Disc Placing a Printable Disc Removing a Printable Disc 57
Cautions When Printing on a Printable Disc • Be sure to use the disc tray supplied with this printer. It has a "M" on the upper side. • Do not print on printable discs that are not compatible with inkjet printing. The ink will not dry and may cause problems with the disc itself or devices which the disc is loaded onto. • Do not print on the printable discs' recording surface. Doing so will make data recorded on discs unreadable. • Hold the printable discs by their edges.
Before Placing a Printable Disc The following items are needed to print onto the printable disc: • disc tray (supplied with the printer) * Use the disc tray with "M" on the surface. The disc tray may be stored in the disc tray storage compartment of the paper output tray. • 4.72 inches (12 cm) printable disc Obtain a printable disc with a label surface compatible with inkjet printing. Note • A "printable disc" differs from regular disc (BD/DVD/CD, etc.
Placing a Printable Disc To print onto a printable disc, place it on the disc tray supplied with the printer, then insert it into the printer. This procedure also applies to printing from a computer. Important • Do not attach the disc tray until the message asking you to load the printable disc is displayed. Doing so can damage the printer. 1.
Note • The disc tray may be ejected after a specified period of time has elapsed. In this case, follow the on-screen instructions to attach the disc tray. 4. Insert the disc tray straight until the white line on the disc tray guide is almost aligned with the arrow ( ) on the disc tray. Important • Do not insert the disc tray beyond the white line on the disc tray guide.
Removing a Printable Disc 1. Pull out the disc tray. 2. Remove the printable disc from the disc tray. Important • Do not touch the printing surface when removing the disc from the disc tray. Note • Dry the printing surface sufficiently before removing the disc. If you see printing on the disc tray or the transparent parts on inner or outer diameter of the printable disc, wipe them off after the printing surface has dried. 3. Store the disc tray into the disc tray storage compartment.
Loading Originals Loading Originals on the Platen Glass Loading Based on Use Supported Originals How to Detach / Attach the Document Cover 63
Loading Originals on the Platen Glass 1. Open the document cover. 2. Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass. Loading Based on Use Important • Be sure to observe the following when loading the original on the platen glass. • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass. • Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the original.
Important • After loading the original on the platen glass, be sure to close the document cover before starting to copy or scan.
Loading Based on Use Load the original in the correct position according to the function to use. If you do not load the original correctly, it may not be scanned properly. Loading the Original to Be Aligned with the alignment mark • Load originals to copy • In Scan, ◦ select Auto scan for Doc.type to scan text documents, magazines, or newspapers ◦ select Document or Photo for Doc.type and specify a standard size (A4, Letter, etc.
• Scan only one printed photo in Photo copy • In Scan, ◦ select Auto scan for Doc.type to scan one printed photo, postcard, business card, or disc (BD/DVD/CD) ◦ select Photo for Doc.type and specify Auto scan for Scan size to scan one original Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally striped area cannot be scanned.
• Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.
Supported Originals Item Types of originals Details - Text document, magazine, or newspaper - Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) Size (width x height) Max. 8.5 x 11.7 inches (216 x 297 mm) Note • When loading a thick original such as a book on the platen glass, you can load it by removing the document cover from the printer.
How to Detach / Attach the Document Cover Detaching the document cover: Hold up the document cover vertically and then tip it back. Attaching the document cover: Fit both hinges (A) of the document cover into the holder (B) and insert both hinges of the document cover vertically as illustrated below.
Inserting the Memory Card Before Inserting the Memory Card Inserting the Memory Card Removing the Memory Card 72
Before Inserting the Memory Card The following types of memory cards and image data are compatible with the printer. Important • If you took and saved photos on a type of memory card that does not guarantee the operation on your PictBridge (Wireless LAN) compliant device, the image data may be unreadable on the printer or damaged.
• The printer accepts images scanned and saved with the printer when Doc.type is set to Photo and Format is set to JPEG (file extension ".jpg"). Note • This device incorporates exFAT technology licensed from Microsoft.
Inserting the Memory Card Important • When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp is flashing, the printer is accessing the memory card. In this case, do not touch the area around the card slot. Note • When Read/write attribute is set to Writable from USB PC, you cannot print image data from the memory card using the operation panel of the printer.
Important • Part of the memory card will protrude from the card slot, but do not force it into the slot any further. This can damage the printer or the memory card. • Make sure that the memory card is correctly oriented before inserting it into the card slot. If you force the memory card into the card slot in the wrong orientation, the memory card or the printer can be damaged.
Removing the Memory Card Important • If you used the card slot as the memory card drive of a computer, you must perform the "safe removal" operation on your computer before physically removing the memory card from the printer. Setting Up Card Slot as Memory Card Drive of Computer 1. Make sure that the Access lamp is lit, and remove the memory card. Hold the part of the memory card that is protruding and remove it straightforward from the printer.
Replacing Ink Tanks Replacing Ink Tanks Checking Ink Status on the Touch Screen Checking the Ink Status with the Ink Lamps 78
Replacing Ink Tanks When remaining ink cautions or errors occur, the message will appear on the touch screen to inform you of the error. In this state, the printer cannot print or scan. Take appropriate action according to the message. An Error Occurs Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure. • For precautionary notes on handling ink tanks, see Notes on ink tanks.
Important • Do not touch other parts besides the ink tanks. • Handle the ink tank carefully to avoid staining of clothing or the surrounding area. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables. Note • Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks. • For details on ink lamp flashing speed, see Checking the Ink Status with the Ink Lamps. 4.
5. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the Y-shape air hole (D). 6. Lift up the tab on the orange protective cap (E) to remove it off GENTLY. Important • Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air hole (D) blocked, ink may splash. • Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may stain your hands if you touch them.
8. Press on the top of the ink tank until the ink tank snaps firmly into place. Make sure that the ink lamp lights up. Important • You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the print head holder. • You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. 9. Close the scanning unit / cover.
Note • If the error message appears after the scanning unit / cover is closed, take appropriate action. An Error Occurs • When you start printing after replacing the ink tank, the printer starts cleaning the print head automatically. Do not perform any other operations until the printer completes the cleaning of the print head. • If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, align the print head.
Checking Ink Status on the Touch Screen 1. Make sure that the power is turned on, and display the HOME screen. If the HOME screen is not displayed, press the HOME button to display it. 2. Select Setup on the HOME screen. Using the Operation Panel The setup menu screen will appear. 3. Select Estimated ink levels. A symbol appears in the area (A) if there is any information about the remaining ink level. Example: The ink is running low. Prepare a new ink tank.
Checking the Ink Status with the Ink Lamps 1. Make sure that the power is turned on. 2. Open the scanning unit / cover. Replacing Procedure 3. Check the ink lamp. Close the scanning unit / cover after checking the ink lamp status. Replacing Procedure • The ink lamp is on. The ink tank is correctly installed. • The ink lamp is flashing. Flashing slowly (at around 3-second intervals) Lighting for 3 seconds (A) repeats The ink is running low. Prepare a new ink tank.
• The ink lamp is off. The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink tank is not firmly in place, make sure that the orange protective cap has been removed from the bottom of the ink tank, then press on the top of the ink tank until the ink tank clicks into place. If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer cannot print. Check the error message displayed on the touch screen.
Maintenance If Printing Is Faint or Uneven Performing Maintenance Functions from Your Computer (Windows) Performing Maintenance Functions from Your Computer (Mac OS) Cleaning 87
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head 88
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink tank. Note • Make sure that the orange protective tape does not remain on the ink tank. • Open the scanning unit / cover and make sure that the lamp on the ink tank is lit.
If there are missing lines or horizontal white streaks in the pattern: Step3 Clean the print head. From the printer Cleaning the Print Head From the computer • For Windows: Cleaning the Print Heads • For Mac OS: Cleaning the Print Heads After cleaning the print head, print and examine the nozzle check pattern: Step1 If the problem is not resolved after performing from step 1 to step 3 twice: Step4 Clean the print head deeply.
• For Mac OS: Adjusting Print Head Position 91
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 6. Select Yes. The operation panel is opened and the paper output tray is pulled out automatically. The nozzle check pattern will be printed and two pattern confirmation screens will appear on the touch screen. 7. Examine the nozzle check pattern.
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern C or horizontal white streaks in the pattern D. A: No missing lines/No horizontal white streaks B: Lines are missing/Horizontal white streaks are present E: Number of sheets printed so far 2. Select the pattern that is closer to the printed nozzle check pattern on the confirmation screen.
For A (no missing lines or no horizontal white streaks) in both the pattern C and pattern D: The cleaning is not required. Select All A, confirm the message, then select OK. The screen will return to the Maintenance screen. For B (lines are missing or horizontal white streaks are present) in the pattern C or pattern D, or in both patterns: The cleaning is required. Select Also B, then select Yes on the cleaning confirmation screen. The printer starts cleaning the print head.
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 6. Select Yes. The printer starts cleaning the print head. Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 minute. The pattern print confirmation screen will appear. 7. Select Yes. The operation panel is opened and the paper output tray is pulled out automatically. The nozzle check pattern will be printed. 8. Examine the nozzle check pattern.
Deep Print Head Cleaning If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
The confirmation screen will appear. 6. Select Yes. The printer starts cleaning the print head deeply. Do not perform any other operations until the printer completes the deep cleaning of the print head. This takes about 1 to 2 minutes. The pattern print confirmation screen will appear. 7. Select Yes. The operation panel is opened and the paper output tray is pulled out automatically. The nozzle check pattern will be printed. 8. When the completion message appears, select OK. 9.
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the ink tank whose ink is low. You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)* * Be sure to use paper that is white and clean on both sides. 1. Make sure that the power is turned on. 2.
The confirmation screen will appear. 6. Confirm the message, then select Yes. The operation panel is opened and the paper output tray is pulled out automatically. The print head alignment sheet will be printed. Important • Do not touch any printed part on the print head alignment sheet. If the sheet is stained or wrinkled, it may not be scanned properly. 7. When the message "Did the patterns print correctly?" appears, confirm that the pattern is printed correctly, then select Yes.
8. Confirm the message, then load the print head alignment sheet on the platen glass. Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark on the bottom right corner of the sheet with the alignment mark . 9. Close the document cover gently, then select OK. The printer starts scanning the print head alignment sheet, and the print head position will be adjusted automatically.
Checking Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the ink tank types of your model. When you select Ink Level Information from the Canon IJ Printer Utility2 pop-up window, an illustration showing the status of the ink appears. Estimated ink levels You can check the types and levels of ink. When ink levels are running low or an error occurs because there is no ink, a notification icon will appear.
Cleaning Cleaning Exterior Surfaces Cleaning the Platen Glass and Document Cover Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning) Cleaning Cassette Pads 104
Cleaning Paper Feed Rollers If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary. You need to prepare: three sheets of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel The setup menu screen will appear. 3. Select Maintenance.
9. Make sure that the paper feed roller has stopped rotating, then follow the message to load the three sheets of A4 or Letter-sized plain paper. 10. Select OK. The printer starts cleaning. The cleaning will be complete when the paper is ejected. 11. When the completion message appears, select OK. If the problem is not resolved after cleaning the paper feed roller, contact the service center.
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper. 1. Make sure that the power is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel The setup menu screen will appear. 3. Select Maintenance.
9. Load only this sheet of paper in the cassette with the ridges of the creases facing up and the edge of the half with no crease facing to the far side. 10. Select OK. The operation panel is opened and the paper output tray is pulled out automatically. The paper cleans the inside of the printer as it feeds through the printer. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. 11. When the completion message appears, select OK.
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Main Components and Their Use Main Components Power Supply Using the Operation Panel Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (Mac OS) Changing Settings from Operation Panel Changing Printer's Setting Using Web Browser Network Connection Network Connection Tips Network Settings (IJ Network Device Setup Utility) (Windows) IJ Network Device Setup Utility Starti
Transporting Your Printer Legal Restrictions on Scanning/Copying Specifications 111
Safety Safety Precautions Regulatory Information WEEE (EU&EEA) 112
Safety Precautions Choosing a location • Do not install the printer in a location that is unstable or subject to excessive vibration. • Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source. To avoid the risk of fire or electric shocks, use the printer under the operating environment specified in the Specifications. • Do not place the printer on a thick rug or carpet. • Do not place the printer with its back attached to the wall.
Regulatory Information Users in the U.S.A. FCC Notice (U.S.A. Only) For 120V, 60Hz model Model Number: K10443 (Contains FCC Approved WLAN Module K30365) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles).
WEEE (EU&EEA) Only for European Union and EEA (Norway, Iceland and Liechtenstein) This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
place par les collectivités locales pour le recyclage des Déchets des Équipements Électriques et Électroniques (DEEE). Le traitement inapproprié de ce type de déchet risque d'avoir des répercussions sur l'environnement et la santé humaine, du fait de la présence de substances potentiellement dangereuses généralement associées aux équipements électriques et électroniques.
autorizado o con el servicio de recogida de basuras doméstico. Si desea más información acerca de la devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee. Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega, Islàndia i Liechtenstein) Aquest símbol indica que aquest producte no s’ha de llençar a les escombraries de la llar, d’acord amb la Directiva RAEE (2012/19/UE) i la legislació nacional.
Este símbolo indica que o produto não deve ser colocado no lixo doméstico, de acordo com a Directiva REEE (2012/19/UE) e a legislação nacional. Este produto deverá ser colocado num ponto de recolha designado, por exemplo, num local próprio autorizado quando adquirir um produto semelhante novo ou num local de recolha autorizado para reciclar resíduos de equipamentos eléctricos e electrónicos (EEE).
ανακύκλωση, επικοινωνήστε με το τοπικό γραφείο της πόλης σας, την υπηρεσία απορριμμάτων, το εγκεκριμένο σχήμα ΑΗΗΕ ή την υπηρεσία απόρριψης οικιακών αποβλήτων. Για περισσότερες πληροφορίες σχετικά με την επιστροφή και την ανακύκλωση των προϊόντων ΑΗΗΕ, επισκεφθείτε την τοποθεσία www.canon-europe.com/weee.
köps (en mot en). Olämplig hantering av avfall av den här typen kan ha en negativ inverkan på miljön och människors hälsa på grund av de potentiellt farliga ämnen som kan återfinnas i elektrisk och elektronisk utrustning. Din medverkan till en korrekt avfallshantering av den här produkten bidrar dessutom till en effektiv användning av naturresurserna.
Tylko dla krajów Unii Europejskiej oraz EOG (Norwegia, Islandia i Liechtenstein) Ten symbol oznacza, że zgodnie z dyrektywą WEEE dotyczącą zużytego sprzętu elektrycznego i elektronicznego (2012/19/UE) oraz przepisami lokalnymi nie należy wyrzucać tego produktu razem z odpadami gospodarstwa domowego. Produkt należy przekazać do wyznaczonego punktu gromadzenia odpadów, np.
mõeldud kogumispunkti. Täiendava teabe saamiseks elektri- ja elektroonikaseadmetest tekkinud jäätmete tagastamise ja ümbertöötlemise kohta võtke ühendust kohaliku omavalitsusega, asjakohase valitsusasutusega, asjakohase tootjavastutusorganisatsiooniga või olmejäätmete käitlejaga. Lisateavet leitate ka Interneti-leheküljelt www.canon-europe.com/weee.
Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/19/EU) in državno zakonodajo ne smete odvreči v gospodinjske odpadke. Ta izdelek morate odložiti na ustrezno zbiralno mesto, na primer pri pooblaščenem prodajalcu, ko kupite podoben nov izdelek ali na zbiralno mesto za recikliranje električne in elektronske opreme. Neprimerno ravnanje s takšnimi odpadki lahko negativno vpliva na okolje in človekovo zdravje zaradi nevarnih snovi, ki so povezane z električno in elektronsko opremo.
mai multe informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/ weee. Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn) Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi (2012/19/EC) i vašem nacionalnom zakonu. Ovaj proizvod je potrebno predati na posebno mjesto za sakupljanje otpada, npr.
Main Components and Their Use Main Components Power Supply Using the Operation Panel 126
Main Components Front View Rear View Inside View Operation Panel 127
Front View (1) operation panel Use to change the settings of the printer or to operate it. Opens automatically when the printer starts printing. Operation Panel (2) document cover Open to load an original on the platen glass. (3) feed slot cover Prevents anything from falling into the feed slot. Open it to slide the paper guides, and close it before printing. (4) paper support Extend to load paper in the rear tray. (5) rear tray cover Open to load paper in the rear tray. (6) rear tray Load paper here.
(8) cassette Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer. Loading Paper in the Cassette (9) paper guides Align with right/left/front sides of the paper stack. (10) cassette cover Detach to load paper in the cassette. (11) paper output tray Comes out automatically when the printer starts printing. Printed paper is ejected. (12) paper output support Extend to support ejected paper. (13) card slot Insert a memory card.
(17) platen glass Load an original here.
Rear View (1) rear cover Detach when removing jammed paper. (2) transport unit Open when removing jammed paper. (3) power cord connector Plug in the supplied power cord. (4) USB port Plug in the USB cable to connect the printer with a computer. Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable while the printer is printing or scanning originals with the computer.
Inside View (1) scanning unit / cover Scans originals. Also, lift and open it to replace an ink tank, to check the ink lamp, or to remove jammed paper inside the printer. (2) ink lamps Lights or flashes to indicate the ink tank status. Checking the Ink Status with the Ink Lamps (3) print head holder The print head is pre-installed. Note • For details on replacing an ink tank, see Replacing Ink Tanks.
Operation Panel (1) ON button/POWER lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on the power, make sure that the document cover is closed. (2) touch screen Displays messages, menu items, and the operational status. Directly touch the screen lightly with your finger tip to select a menu item or displayed button. You can also preview photos on a memory card before printing.
Power Supply Confirming that the Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer 134
Confirming that the Power Is On The POWER lamp is lit when the printer is turned on. Even if the touch screen is off, if the POWER lamp is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. • The touch screen display will turn off if the printer is not operated for about 10 minutes. To restore the display, press any button except the ON button or touch the touch screen.
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The POWER lamp flashes and then remains lit. Confirming that the Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. • If an error message is displayed on the touch screen, see An Error Occurs.
Important • When you unplug the power cord after turning off the printer, be sure to confirm that the POWER lamp is off. Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval. This feature is set to on by default.
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • • • • • The power plug/power cord is hot. The power plug/power cord is rusty. The power plug/power cord is bent. The power plug/power cord is worn. The power plug/power cord is split. Caution • If you find anything unusual with the power plug/power cord described above, Unplugging the Printer and call for service.
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the POWER lamp is off. Unplugging the power cord while the POWER lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced. 1. Press the ON button to turn the printer off.
Using the Operation Panel The operation panel consists of the ON button (A) and touch screen (B). Touch the HOME screen on the touch screen with your finger tip to select menus for copying, scanning, and other functions. Operations on the Home Screen A: ON button B: touch screen Basic Operation of the touch screen Buttons on the touch screen Basic Operation of the touch screen Touch the touch screen lightly with your finger tip or move your finger to access various functions or settings.
Touch Touch lightly with your finger tip. To move forward (or go back) menus or photos continuously, keep touching the forward (or back) mark. Flick Flick your finger on the screen up, down, left, or right. Use to switch menus or move forward or backward through photos. Drag While lightly touching the screen, move your finger up, down, left, or right. Use to view lists of items or move sliders.
Operations on the Home Screen Display the menu screen or the settings screen from the Home screen. C. Basic menu Select to copy or scan using the operation panel. After selecting a basic menu, the particular menus are displayed. D. Network status Displays the current network status. Select to display the basic network information or to change the network settings. The icon differs depending on the network of use or the network status.
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur. Place the printer near the wireless router. Wireless LAN is enabled but the printer is not connected to the wireless router. Wireless Direct is enabled. Wireless LAN is disabled. E. Cloud Displays the cloud's Main screen. You can use the services of PIXMA/MAXIFY Cloud Link. F. Setup Displays the printer's setting menus or the maintenance menus. G.
L. Stop button Cancels operation when print, copy, or scan job is in progress.
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (Mac OS) Changing Settings from Operation Panel Changing Printer's Setting Using Web Browser 145
Changing Printer Settings from Your Computer (Mac OS) Registering a Changed Printing Profile Managing the Printer Power Changing the Printer Operation Mode 146
Registering a Changed Printing Profile You can name and register the printing profile you made in the Print Dialog. The registered printing profile can be called up from Presets to be used. You can also delete the unnecessary printing profile. The procedure for registering a printing profile is as follows: Registering a Printing Profile 1. In the Print dialog, set the necessary items 2. Select Save Current Settings as Preset... from the Presets 3.
Deleting Unnecessary Printing Profile 1. Select the printing profile to be deleted In the print dialog, select Show Presets... in the Presets section. Then in the dialog that appears, select the name of the printing profile to be deleted. 2. Delete the printing profile Click Delete, and click OK. The selected printing profiles will be deleted from Presets.
Managing the Printer Power This function allows you to manage the printer power from the printer driver. The procedure for managing the printer power is as follows: Power Off The Power Off function turns off the printer. When you use this function, you will not be able to turn the printer on from the printer driver. 1. Select Power Settings from the pop-up menu on the Canon IJ Printer Utility2 2. Execute power off Click Power Off, and when the confirmation message appears, click OK.
When the confirmation message appears, click OK. The setting is enabled after this. When you want to disable this function, select Disable from the list according to the same procedure.
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. The procedure for configuring Custom Settings is as follows: 1. Make sure that the printer is on, and then select Custom Settings from the pop-up menu on the Canon IJ Printer Utility2 Note • If the computer is unable to communicate with the printer, a message may be displayed because the computer cannot access the function information that was set on the printer.
Don't detect mismatch of paper settings when printing from computer When you print documents from your computer and the paper settings in the print dialog and the paper information registered on the printer do not match, this setting disables the message display and allows you to continue printing. To disable detection of paper setting mismatches, select this check box. 3. Apply the settings Click Apply and when the confirmation message appears, click OK.
Changing Settings from Operation Panel Changing Settings from Operation Panel Setting Items on Operation Panel Print settings LAN settings Device user settings PictBridge print settings Language selection Firmware update Feed settings Reset setting Web service setup System information ECO settings Quiet setting 153
Changing Settings from Operation Panel This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example. 1. Make sure printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select Device settings. The Device settings screen is displayed. 5. Select a setting item to adjust. The setting screen for the selected item is displayed. 6. Select a setting item. 7.
For more on setting items on the operation panel: Setting Items on Operation Panel 155
Setting Items on Operation Panel Items for Printer Device user settings Web service setup Language selection ECO settings Quiet setting Items for Paper/Printing Print settings Feed settings PictBridge print settings Items for Maintenance/Management System information Firmware update LAN settings Reset setting 156
Print settings • Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. • Extended copy amount Selects the amount of image that extends off the paper when printing in borderless (full). Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page.
Important • For Letter-sized or Legal-sized paper, you can adjust the left/right margins between -0.06 inch/-1.5 mm and +0.06 inch/+1.5 mm even if you specify the value over 0.06 inch/1.5 mm.
LAN settings Wireless LAN Wireless Direct Common settings Wireless LAN • WLAN active/inactive Enables/disables wireless LAN. • Wireless LAN setup Selects the setup method for wireless LAN connection. ◦ Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.
Items Setting SSID XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX (up to 32 characters) Wireless LAN security Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2PSK(TKIP)/WPA2-PSK(AES) Signal strength (%) XXX IPv4 address XXX. XXX. XXX. XXX (12 characters) IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters) IPv4 default gateway XXX. XXX. XXX.
Select Print details and then Yes to print the list. Printing Network Settings Important • The network settings printout contains important information about your network. Handle it with care. The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.) Items Setting SSID DIRECT-XXXX-TS8000series Password XXXXXXXXXX (10 characters) Wireless LAN security WPA2-PSK(AES) IPv4 address XXX. XXX. XXX. XXX (12 characters) IPv4 subnet mask XXX. XXX.
Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. • TCP/IP settings Performs IPv4 or IPv6 setting. • WSD setting Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista). ◦ Enable/disable WSD Selects whether WSD is enabled or disabled.
Setting items for printing from a PictBridge (Wireless LAN) compliant device. ◦ Enable/disable communication Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device. ◦ Timeout setting Specifies the timeout length. • IPsec settings Selecting Active allows you to specify the IPsec security.
Device user settings • Date display format Changes the display format of dates when printed. Note • When ON is selected for Print date on the print settings screen in printing from a memory card, the date is printed in the date display format you selected. Setting Items for Photo Printing Using Operation Panel • Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. Important • Remove the memory card before changing this setting.
Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer. ◦ Auto power on Selecting ON enables the printer to turn on automatically when a scanning command from a computer or printing data is sent to the printer. • You can also enter this setting menu by selecting ECO settings and Energy saving settings on the HOME screen.
Language selection Changes the language for the messages and menus on the touch screen.
Firmware update You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server. Note • Only Check current version is available when Inactive is selected for WLAN active/inactive of Wireless LAN in LAN settings. • Install update Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the onscreen instructions to perform update.
Feed settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. For details: Paper Settings • Register paper information Registers the paper size and the media type you load on the rear tray and in the cassette. Note • Plain paper can only be loaded in the cassette.
Reset setting You can set the settings back to the default. • Web service setup only Sets the Web service settings back to the default. • LAN settings only Sets the LAN settings back to the default. • Settings only Sets the settings such as the paper size or media type back to the default. • Device info sending setting only Sets only the device information sending settings back to the default. • Reset all Sets all settings you made to the printer back to the default.
System information To display this menu, select System information on • Current version Displays the current firmware version. • Printer name Displays the printer name currently specified. • Serial number Displays the printer serial number. • MAC address of wireless LAN Displays the MAC address for wireless LAN. 170 Setup.
ECO settings This setting allows you to use automatic duplex printing as a default to save paper and to turn on/off the printer automatically to save electricity. Using Duplex Printing Using Power Saving Function Using Duplex Printing Follow the procedure below to use duplex printing. 1. Make sure printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select ECO. 5. Select Two-sided printing setting. 6. Specify settings as necessary. A.
Using Power Saving Function Follow the procedure below to use power saving function. 1. Make sure printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select ECO. 5. Select Energy saving settings. 6. Check on-screen instructions and select Next. 7. Specify settings as necessary. A. Specify the length of time to turn the printer off automatically when no operation is made or no printing data is sent to the printer. B.
Network Connection Network Connection Tips 173
Network Connection Tips Default Network Settings Another Printer Found with Same Name Connecting to Another Computer via LAN/Changing from USB to LAN Connection Printing Network Settings Changing Wireless LAN Connection Method 174
Default Network Settings LAN Connection Defaults Item Default Enable/Disable LAN Disable LAN SSID BJNPSETUP Wireless LAN security Disable IP address (IPv4) Auto setup IP address (IPv6) Auto setup Set printer name* XXXXXXXXXXXX Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 minutes Enable/disable Bonjour Enable Service name Canon TS8000 series LPR protocol setting Enable RAW protocol Enable LLMNR Active PictBridge communication Enable ("XX" represents a
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.) *2 The password is specified automatically when the printer is turned on for the first time. *3 "ZZZZZZ" represents last six digits of printer's MAC address.
Another Printer Found with Same Name When the printer is found during setup, other printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results. • For Mac OS: The printer names appear with the MAC address added at the end or as the printer name specified by Bonjour.
Connecting to Another Computer via LAN/Changing from USB to LAN Connection For Windows: For Mac OS: For Windows: To add a computer to connect to the printer on a LAN or to change from USB to LAN connection, perform setup using the Setup CD-ROM or follow the instructions on the Canon website. For Mac OS: To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, follow the instructions on the Canon website.
Printing Network Settings Use the operation panel to print the printer's current network settings. Important • The network settings printout contains important information about your network. Handle it with care. 1. Make sure printer is turned on. If the HOME screen is not displayed, press the HOME button. 2. Load two sheets of A4 or Letter-sized plain paper. 3. Tap (Network status) icon. Using the Operation Panel The menu screen appears. 4. Check message and tap Yes. 5. Tap Print details. 6.
Encryption Encryption method None/WEP/TKIP/AES WEP Key Length WEP key length (bits) Inactive/128/64 Authentication Authentication method None/auto/open/shared/WPA-PSK/WPA2PSK Signal Strength Signal strength 0 to 100 [%] TCP/IPv4 TCP/IPv4 Enable IP Address IP address XXX.XXX.XXX.XXX Subnet Mask Subnet mask XXX.XXX.XXX.XXX Default Gateway Default gateway XXX.XXX.XXX.
IPsec IPsec setting Active Security Protocol Security method ESP/ESP & AH/AH Wireless Direct Wireless direct Enable/Disable Connection Connection status Active/Inactive SSID SSID Wireless Direct SSID Password Password Wireless Direct password (10 alphanumeric characters) Channel Channel 3 Encryption Encryption method AES Authentication Authentication method WPA2-PSK TCP/IPv4 TCP/IPv4 Enable IP Address IP address XXX.XXX.XXX.XXX Subnet Mask Subnet mask XXX.XXX.XXX.
Bonjour Service Name Bonjour service name Bonjour service name (Up to 52 alphanumeric characters) LLMNR LLMNR setting Enable/Disable SNMP SNMP setting Enable/Disable PictBridge Commun. PictBridge communication Enable/Disable DNS Server Obtain DNS server address automatically Auto/Manual Primary Server Primary server address XXX.XXX.XXX.XXX Secondary Server Secondary server address XXX.XXX.XXX.
Changing Wireless LAN Connection Method Follow either procedure below to change wireless LAN connection method (infrastructure or wireless direct). • For Windows: ◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup. ◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility. Important • Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless connect mode on the printer following the procedure below. 1.
Ensuring Optimal Printing Results Ink Tips Printing Tips Check Paper Settings Before Printing Set Rear Tray/Cassette Paper Information After Loading Paper Canceling Print Jobs Printer Handling Precautions Keeping Print Quality High Transporting Your Printer 184
Transporting Your Printer When relocating the printer, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport. • With the print head and ink tank left installed in the printer, press the ON button to turn off the power. This allows the printer to automatically cap the print head, thus preventing it from drying.
Legal Restrictions on Scanning/Copying Scanning, printing, copying, or modifying copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative.
Specifications General Specifications Printing resolution (dpi) 9600* (horizontal) x 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum. Interface USB Port: Hi-Speed USB *1 LAN Port: Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2 *1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
Recommended conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 10 to 80 % RH (no condensation) * For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions. Storage environment Temperature: 32 to 104 °F (0 to 40 °C) Humidity: 5 to 95 % RH (no condensation) Power supply AC 100-240 V, 50/60 Hz Power consumption Printing (Copy): Approx. 16 W Standby (minimum): Approx. 1.0 W *1*2 OFF: Approx. 0.
Gradation (Input / Output) Gray: 16 bit/8 bit Color: 48 bit/24 bit (RGB each 16 bit/8 bit) Network Specifications Communication protocol TCP/IP Wireless LAN Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency bandwidth: 2.4 GHz Channel: 1-11 or 1-13 * Frequency bandwidth and available channels differ depending on country or region. Communication distance: Indoors 164 feet/50 m * Effective range varies depending on the installation environment and location.
Hard Disk Space 1.5 GB Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. Display XGA 1024 x 768 Other Supported OS Some functions may not be available with each OS. Refer to the Canon web site for details on operation with iOS, Android, Windows RT, and Windows 10 Mobile.
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Before Printing on Art Paper Print Area 191
Supported Media Types For best results, choose paper designed for how you are printing. A variety of paper for documents as well as photos or illustrations is available from Canon. Use genuine Canon paper to print important photos, when possible. Media Types Genuine Canon paper Note • For warnings on use of the non-printable side, see each product's usage information. • For details on page sizes and media types, access the Canon website. • Genuine Canon paper is not available in some countries or regions.
• When printing photos saved on a PictBridge (Wireless LAN) compliant device, you must specify the page size and media type. Printing from Digital Camera • You can use non-Canon genuine art paper. For details, access our website. You cannot print in the top and bottom 1.38 inch (35 mm) margins of the paper (in the printing direction). Sizes for Art Paper Before Printing on Art Paper Page Sizes You can use the following page sizes.
- Maximum size: 8.50 x 11.69 inches (215.9 x 297.0 mm) Paper Weight You can use paper in the following weight range.
Paper Load Limit Genuine Canon Paper Paper for printing documents: Media Name Rear Tray Cassette Paper Output Tray Canon Red Label Superior Approx. 100 sheets Approx. 100 sheets Approx. 50 sheets Canon Océ Office Colour Paper Approx. 80 sheets Approx. 80 sheets Approx. 50 sheets High Resolution Paper *1 Approx. 80 sheets N/A Approx. 50 sheets Paper for printing photos: Media Name
Paper other than Genuine Canon Paper Common Name Rear Tray Cassette Paper Output Tray Plain Paper (including recycled paper)*1 Approx. 100 sheets (10 Approx. 100 sheets sheets: Legal) Approx. 50 sheets (10 sheets: Legal) Envelopes 10 envelopes N/A *3 T-Shirt Transfers 1 sheet : A4 N/A *3 *1 Normal feeding at maximum capacity may not be possible with some types of paper, or under very high or low temperature or humidity. In this case, load half the amount of paper or less.
Unsupported Media Types Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction.
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands. • Do not touch the printed surface until the ink is dried. Even when the ink is dried, be careful not to touch the printed surface as much as possible when handling.
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (Mac OS Printer Driver) Printing Using Canon Application Software Printing Using a Web Service Printing from an AirPrint-enabled Printer with Mac 199
Printing from Application Software (Mac OS Printer Driver) Basic Printing Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Updating the Printer Driver 200
Basic Printing Setup This section describes the simple setup procedure so that the printer prints properly. 1. Check that printer power is on 2. Load paper in printer 3. Select printer Select your model from the Printer list in the Print Dialog. Note • Click Show Details to switch the Setup window to the detailed display. 4. Select the paper size For Paper Size, select the paper size to be used. You can also set the number of copies, the printing range, and the printing direction.
5. From the pop-up menu, select Quality & Media 6. Select media type Select the media type that is loaded in the printer.
7. Select paper source For Paper Source, select Automatically Select, Rear Tray, or Cassette, whichever matches your purpose. Important • The paper source settings that can be selected may differ depending on the paper type and size. 8. Select print quality For Print Quality, select High, Standard, or Draft, whichever matches the purpose.
Important • The print quality selections will differ depending on which print setting you select. 9. Click Print When you execute printing, the printer prints the document to match the media type and paper size. Important • If you check the Do not show again check box when a guide message is displayed before printing starts, this will stop any more guide messages from being displayed. • In the Presets section, click Save Current Settings as Preset... to register the specified settings.
• Paper Settings on the Printer Driver and the Printer (Media Type) • Paper Settings on the Printer Driver and the Printer (Paper Size) Checking Printer Settings and Applying Settings to Printer Driver 1. On Print Dialog screen, open pop-up menu, and select Quality & Media 2. Click Printer Media Information On the Printer Media Information screen, click (open/close button) or (update button).
Paper Settings on the Printer Driver and the Printer (Media Type) When you use this printer, selecting a media type and paper size that matches the print purpose will help you achieve the best print results. You can use the following media types on this printer. Canon genuine papers (Document Printing) Media Type in the printer driver Media name
Paper Settings on the Printer Driver and the Printer (Paper Size) When you use this printer, selecting a paper size that matches the print purpose will help you achieve the best print results. You can use the following paper sizes on this printer.
Various Printing Methods Setting the Number of Copies and Printing Order Execute Borderless Printing Scaled Printing Page Layout Printing Duplex Printing Setting Up Envelope Printing Printing on Postcards Setting Paper Dimensions (Custom Size) 208
Setting the Number of Copies and Printing Order Collate pages + Reverse Collate pages + Normal Reverse The procedure for specifying the number of copies and printing order is as follows: 1. Specify the number of copies to be printed Specify the number of copies to print from the Copies in the Print Dialog. 2. Select Paper Handling from the pop-up menu 3.
5. Click Print When you execute print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
Execute Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
Important • When the Borderless Extension slider is set to the rightmost position, the back side of the paper may become smudged. 4. Click Print When you execute print, the data is printed without any margins on the paper. Important • Borderless printing only supports specific paper sizes. Make sure to select a paper size with the wording "(borderless)" from the Paper Size.
When you are not satisfied with the result of borderless printing, reduce the amount of extension. The extension amount decreases as the Borderless Extension slider is moved to the left. Important • When the amount of extension is decreased, an unexpected margin may be produced on the print, depending on the size of the paper. Note • When the Borderless Extension slider is set to the leftmost position, image data will be printed in the full size.
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Select the printer In the Page Setup Dialog, select your model name from the Format For list. 2. Set scaled printing Specify the scaling factor in the Scale box, and click OK. Note • Depending on the Scale value that you set, an error message may be displayed. 3. Complete the setup On the Print Dialog, click Print. When you execute print, the document will be printed with the specified scale.
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Select Layout from the pop-up menu in the Print Dialog 2. Set the number of original you print on one page In Pages per Sheet, specify the number of page you print on one page. 3. If necessary, set the following items Layout Direction To change the page placement order, select an icon from the list.
Flip horizontally Select this check box to reverse left and right of the document. 4. Click Print When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
Duplex Printing The procedure for printing data on both sides of one sheet of paper is as follows: 1. Set duplex printing Check the Two-Sided check box in the Print Dialog. 2.
3. Set the stapling side For Two-Sided, select either Long-Edge binding or Short-Edge binding. 4. Select Page Processing from the pop-up menu on the Print Dialog 5. Set the stapling margin If necessary, set the Margin width, and to change the Stapling Side, select a setting from the list. Note • Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling Side that can be selected differs. 6. Click Print When you execute print, duplex printing will be started.
Note • When you use duplex printing, the print area becomes slightly smaller than the normal print area.
Setting Up Envelope Printing The procedure for performing envelope printing is as follows: 1. Load envelope into printer 2. Select paper size in print dialog For Paper Size, select Envelope #10, Envelope DL, Envelope You4, or Envelope You6. 3. Set printing orientation To print the addressee information horizontally, select Horizontal for Orientation. Then check the Reverse page orientation from the Layout pop-up menu in the Print dialogue. 4. From pop-up menu, select Quality & Media 5.
Printing on Postcards This section describes the procedure for postcard printing. 1. Load postcard on the printer 2. Select paper size in the Print Dialog Select Postcard or Postcard Double from the Paper Size menu. Important • Return postcards can be used only when you print them from the computer. • When printing a return postcard, always set the paper size to Postcard Double from your application software or the printer driver. • Do not fold the return postcard.
Setting the Print Quality Level (Custom) The print quality level can be set in the Custom. The procedure for setting the print quality level is as follows: 1. Select Quality & Media from the pop-up menu on the Print Dialog 2. Select the print quality Select Custom for Print Quality. 3. Setting the print quality level Move the Quality slider to select the print quality level. 4. Click Print When you execute print, the image data is printed with the selected print quality level.
Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Page Setup Dialog Print Dialog Canon IJ Printer Utility2 Display the Printing Status Screen Deleting the Undesired Print Job Instructions for Use (Printer Driver) 223
Canon IJ Printer Driver The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this printer. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer. Because different models support different print data formats, you need a printer driver for the specific model you are using.
How to Open the Printer Driver Setup Window You can display the printer driver setup window from the application software you are using. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup Dialog opens. Opening the Print Dialog Use this procedure to set the print settings before printing. 1. Select Print...
Page Setup Dialog In the Page Setup dialog, you configure the basic print settings such as the size of paper loaded in the printer or the scaling ratio. To open the Page Setup dialog, you typically select Page Setup... from the File menu of your application software. Settings Click the pop-up menu, and then select the following items: Page Attributes Set the paper size or scaled printing. Save as Default You can save the attributes of the displayed page as the default settings.
Print Dialog In the Print dialog, you can set paper type, paper source and print quality to start printing. To open the Print dialog, you typically select Print... from the File menu of your application software. Printer Select the model to be used for printing. When you click Add Printer..., a dialog for specifying the printer opens. Presets You can save or delete the settings of the Print dialog. Note • You can select Show Presets... to check the print settings that are set in the Print dialog.
Layout You can set page layout printing. Use Reverse page orientation to change the paper orientation, and use Flip horizontally to print a mirror image of the document. You can also set duplex printing. Color Matching You can select the color correction method. Paper Handling You can set the pages to be printed on paper and the print order. Cover Page You can output cover pages both before and after a document. Quality & Media You can set basic print settings that match the printer.
Canon IJ Printer Utility2 The Canon IJ Printer Utility2 allows you to perform printer maintenance or change the settings of the printer. What You Can Do with the Canon IJ Printer Utility2 You can switch between pages in Canon IJ Printer Utility2 by the pop-up menu. You can choose one of the following items from the pop-up menu. Cleaning Clean the printer to clear up clogged print head nozzle.
Display the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock. • If the print data has not been sent to the printer Open System Preferences, and select Printers & Scanners (Print & Scan).
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • When you set up the Page Setup dialog, be sure to begin by selecting the model you are using from the Format For list. If you select another printer, printing may not be performed properly.
Installing Printer Driver You can access our web site through the Internet and download the latest printer driver for your model. This section explains the procedure for installing the downloaded printer driver. 1. Mount disk Double-click the disk image file that you downloaded. The file unzips, and the disk is mounted. 2. Start Installer In the unzipped disk, double-click "PrinterDriver_XXX_YYY.pkg" ("XXX" is the model and "YYY" is the version). 3.
Printing Directly from Smartphone/Tablet Android Print Printing from an AirPrint-enabled Printer with iOS Device Printing from a Device Equipped with Windows 10 Mobile Using Printer with Wireless Direct Printing by Placing Smartphone over Printer 233
Using Printer with Wireless Direct You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices using Wireless Direct) This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly. Follow the procedure below to use Wireless Direct. 1. Changing Printer's Settings 2.
5. Select LAN settings. 6. Select Wireless Direct. 7. Select Wireless Direct active/inactive. 8. Select ON. The confirmation screen asking if you display the password information appears. 9. Select Yes or No. The list of Wireless Direct settings is displayed. The device detects the printer by the identifier (SSID). Note • You can check the following.
See Changing Printer's Settings to enable Wireless Direct. 3. Enter password. Your device is connected to the printer. Note • Check the password for the Wireless Direct. Check by one of the following methods. • Display on the touch screen. LAN settings • Print the network settings. Printing Network Settings • Depending on the device you are using, entering the password is required to connect a device to the printer via wireless LAN. Enter the password specified for the printer.
3. Select Device settings. 4. Select LAN settings. 5. Select Wireless LAN. 6. Select WLAN active/inactive. 7. Select Active. If you do not use the printer over wireless LAN, select Inactive. Changing Wireless Direct Setting Change the settings for the Wireless Direct following the procedure below. 1. Make sure printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select Device settings. 5. Select LAN settings. 6. Select Wireless Direct. 7.
Tap A to display the confirmation screen. To update the identifier (SSID) and the password, tap Yes. To check the security setting and the updated password, tap Details and tap Yes on the screen displayed next. • To change the printer's name displayed on the Wi-Fi Direct compatible device Tap B to display the printer's name (device name) displayed on a Wi-Fi Direct compatible device. Follow the procedure below to change the name. 1. Tap touch screen. 2. Enter device name (up to 32 characters). 3.
Printing Photo Data Printing Photographs Saved on Memory Card Special Photo Menu Setting Items for Photo Printing Using Operation Panel 239
Printing Photographs Saved on Memory Card You can print the photograph saved on the memory card easily. This section describes the procedure to print the photograph in Select photo print. 1. Make sure printer is turned on. 2. Load photo paper. 3. Select Print on the HOME screen. Using the Operation Panel 4. Select From mem. card. The memory card print menus are displayed. 5. Select Select photo print. 6. Insert memory card into card slot. The photo selection screen is displayed.
You can print a copy of the displayed photo by touching the Color button. • To change the display method, the number of copies, or the print settings: Tap near the bottom of the displayed photo to display menus. A. Total number of copies Total number of copies is displayed. When tapping, the Check total no. of copies screen is displayed and you can check the number of copies for each photo. On the Check total no. of copies screen, you can change the number of copies for each photo. B.
Tap to display the photo selection screen. 2. Tap to specify the number of copies. Touch and hold to specify the number of copies by 10 copies. Note • You can specify the number of copies for each photo. Display the photo you want to print and specify the number of copies when the desired photo is displayed. C. Switching group Tap to switch the photo group. For details: Using Useful Display Functions D. Settings Tap to display the Settings screen.
For more on the display method: Using Useful Display Functions F. Zooming in Tap to zoom in on the photo. For details: Using Useful Display Functions G. Date specification Tap to select photo with specifying the date (last modified date of data). For details: Using Useful Display Functions H. Multi display Tap to display the multiple photos at once.
For more on the display method: Using Useful Display Functions 8. Touch Color button. The printer starts printing. Note • Touch the Stop button to cancel printing. • While processing the print job, you can add the print job (Reserve photo print). Adding Print Job Adding Print Job You can add the print job (Reserve photo print) while printing photos. Follow the procedure below to add the print job. 1. Flick photo while printing to select next photo.
Note • While processing the print job, you cannot display the HOME screen, change the print menu, or print from the computer or other devices. • While processing the print job, the photo in other group is not selected. • If you touch the Stop button while processing the print job, the screen to select a method to cancel reservation is displayed. If you tap Cancel all reservations, you can cancel printing all photos. If you tap Cancel the last reservation, you can cancel the last printing job.
Setting Items for Photo Printing Using Operation Panel You can specify the setting of page size, media type, photo fix and so on to print the photos saved on the memory card. Print Settings Screen How to display the print settings screen varies with the print menu. • In Select photo print or Slide show: The following screen is displayed by selecting Settings. • In Trimming print: The following screen is displayed before printing.
on the touch screen. In this case, tap and change the setting. on the upper left on the touch screen to check the message • The settings of the page size, media type, etc. are retained even if another print menu is selected or the printer is turned off. You can specify the following setting items. • Page size Select the page size of the loaded paper. • Type (Media type) Select the media type of the loaded paper. • Paper src Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.
Device user settings 248
Disc Label Printing Copying Label Side of Disc Printing Photo from Memory Card onto Disc Label 249
Copying Label Side of Disc You can copy the label of an existing BD/DVD/CD and print it on a printable disc. Important • You cannot print on 3.15 inches / 8 cm printable discs. • Do not attach the disc tray or place the printable disc until the message asking you to set them is displayed. Doing so can damage the printer. 1. Make sure printer is turned on. 2. Select Copy on the HOME screen. Using the Operation Panel 3. Select Disc label. The print area setting screen is displayed. 4.
6. Follow on-screen instructions to load copy source BD/DVD/CD on platen glass and select OK. The print setting confirmation screen is displayed. Important • Be sure to load the copy source BD/DVD/CD with its label side down on the center of the Platen Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off. 7. After checking print settings, touch Color button for color copying, or Black button for black & white copying. 8.
Note • You can see the procedure to set the printable disc by selecting How to set. • For more on setting the printable disc: Placing a Printable Disc 9. Select OK. The printer starts copying. Note • Touch the Stop button to cancel copying. • After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Printing Photo from Memory Card onto Disc Label You can print a photograph saved on a memory card onto the disc label of the printable disc. Important • You cannot print on 3.15 inches / 8 cm printable discs. • Do not attach the disc tray or place the printable disc until the message asking you to set them is displayed. Doing so can damage the printer. 1. Make sure printer is turned on. 2. Select Print on the HOME screen. Using the Operation Panel 3. Select From mem. card.
A. Specify the outer circle. B. Specify the inner circle. Note • Measure the outer and inner diameters of the printing surface of the printable disc and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter. • For information on printable discs, contact their manufacturers. 7. Specify the amount of ink. If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink. 8.
10. Check print settings and touch Color button. 11. Follow on-screen instructions to set printable disc. Note • You can see the procedure to set the printable disc by selecting How to set. • For more on setting the printable disc: Placing a Printable Disc 12. Select OK. The printer starts printing. Note • Touch the Stop button to cancel printing. • After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink.
Paper Settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. Note • The default display setting is different between when you print or copy from the operation panel of the printer and when you print using the printer driver.
• When you insert the cassette: The screen to register the cassette paper information is displayed. Register the paper size and the media type according to the loaded paper. * You can load only plain paper in the cassette.
• Paper setting for printing or copying: A5 • Paper information registered to the printer: A4 When you start printing or copying, a message is displayed. Selecting OK on the touch screen displays the paper setting specified for printing or copying under the message. Check the message and select OK. When the screen to select the operation is displayed, select one of the operations below. Note • Depending on the setting, the choices below may not be displayed. Print with the loaded paper.
For example, when the paper setting for printing or copying is A5 and the paper information registered to the printer is A4, the printer starts printing or copying with A5 on the paper loaded. Replace the paper and print Select if you want to print after replacing the paper of the rear tray or the cassette. For example, when the paper setting for printing or copying is A5 and the paper information registered to the printer is A4, you load A5 sized paper before you start printing or copying.
Important • When the message which prevents misprinting is disabled: The printer starts printing or copying even though the paper settings for printing or copying and the paper information registered to the printer are different.
Making Copies This section describes the procedure to copy with Standard copy. 1. Make sure printer is turned on. 2. Load paper. 3. Select Copy on the HOME screen. Using the Operation Panel 4. Select Standard copy. The Copy standby screen is displayed. 5. Load original on platen glass. 6. Specify settings as necessary. A. The copy layout is displayed. Switch the layout (single-sided/2-on-1/two-sided). B. Tap to specify the number of copies.
1. Flick to specify the number of copies. 2. Tap to specify the number of copies. If you keep touching here, the number scrolls by 10. C. Tap to display the print setting items. For more on the setting items: Setting Items for Copying D. Tap to preview an image of the printout on the preview screen. For details: Displaying Preview Screen E. Tap to specify the page size.
7. Press Color button for color copying, or Black button for black & white copying. The printer starts copying. Remove the original on the platen glass after copying is complete. Important • Do not open the document cover or remove the original from the platen glass until scanning is completed. Note • To cancel copying, touch the Stop button. Adding Copying Job (Reserve copy) You can add the copying job while printing (Reserve copy). The screen below is displayed when you can add the copying job.
• When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed. • If you touch the Stop button while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you tap Cancel all reservations, you can cancel copying all scanned data. If you tap Cancel the last reservation, you can cancel the last copying job. • If you set a document of too many pages to add the copying job, Cannot add more copy jobs.
Setting Items for Copying You can change the copy settings such as magnification and intensity. Print Settings Screen Note • For more on the print setting screen or the setting item for Photo copy, see Copying Photos. How to display the print setting screen varies with the copy menu. • In Standard copy: The following screen is displayed by tapping Settings on the Copy standby screen. • In Borderless copy, Frame erase copy, or ID card copy: The following screen is displayed before copying.
• Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, displayed on the touch screen. In this case, tap message and change the setting. and Error details are on the upper left on the touch screen to check the • The settings of the page size, media type, etc. are retained even if the printer is turned off.
Adjust print quality according to the original. Important • If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again. • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white. • Layout Select the layout. Copying Two Pages onto Single Page Copying Four Pages onto Single Page • 2-sidedPrintSetting Select whether to perform two-sided copying.
Scanning from Computer (Mac OS) Scanning Using Scanner Driver (ICA Driver) Using IJ Scan Utility Using Scanner Driver (ICA Driver) Scanning Using AirPrint Using IJ Scan Utility Lite Scanning Tips Positioning Originals (Scanning from Computer) Network Scan Settings 268
Scanning Using Scanner Driver (ICA Driver) Using IJ Scan Utility Using Scanner Driver (ICA Driver) 269
Using IJ Scan Utility What Is IJ Scan Utility (Scanner Software)? Starting IJ Scan Utility Using Auto Scan Function Basics Scanning Documents Scanning Photos Scanning with Favorite Settings Scanning Originals Larger than the Platen (Image Stitch) Adjusting Cropping Frames in the Image Stitch Window Scanning Multiple Originals at One Time Saving after Checking Scan Results Sending Scanned Images via E-mail Extracting Text from Scanned Images (OCR) IJ Scan Utility Screens 270
What Is IJ Scan Utility (Scanner Software)? IJ Scan Utility is an application for scanning documents, photos, and other items. Access all scanning functions to scan and save directly, from the icons in the IJ Scan Utility main screen. IJ Scan Utility Features Multiple Scanning Modes Auto allows for one click scanning with default settings for various items. Document will sharpen text in a document or magazine for better readability, and Photo is best suited for scanning photos.
Important • Some functions are available only when My Image Garden is installed. Note • To set the applications to integrate with, see Settings Dialog.
Starting IJ Scan Utility Note • If you have more than one scanner or have changed from USB to network connection, set up the network environment from IJ Scan Utility. Network Scan Settings Select Applications from Go menu of Finder, and then double-click Canon Utilities > IJ Scan Utility > Canon IJ Scan Utility2 icon to start IJ Scan Utility.
Using Auto Scan Function Auto Scan allows for automatic detection of the item type. Important • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (selection boxes; scan areas) in the screen displayed by clicking Driver in the IJ Scan Utility main screen, and then scan again. • • • • Photos with a whitish background Items printed on white paper, hand-written text, business cards, and other unclear items Thin items Thick items 1.
IJ Scan Utility Screens IJ Scan Utility Main Screen Settings Dialog Settings (Auto Scan) Dialog Settings (Document Scan) Dialog Settings (Photo Scan) Dialog Settings (Save to PC (Auto)) Dialog Settings (General Settings) Dialog 275
IJ Scan Utility Main Screen Select Applications from Go menu of Finder, and then double-click Canon Utilities > IJ Scan Utility > Canon IJ Scan Utility2 icon to start IJ Scan Utility. You can complete from scanning to saving at one time by simply clicking the corresponding icon. Product Name Displays the name of the product that IJ Scan Utility is currently set to use. If the displayed product is not the one you want to use, select the desired product from the list.
Driver Allows you to make image corrections and color adjustments when scanning. Save settings and the response after scanning can be specified in the Settings (Driver) dialog. Instructions Opens this guide. Settings... Displays the Settings dialog in which you can specify the scan/save settings and the response after scanning.
Settings Dialog The Settings dialog has three tabs: (Scanning from a Computer), (Scanning from the Operation Panel), and (General Settings). When you click a tab, the options available in the red frame switches; set the details of each function on each tab as needed. (Scanning from a Computer) Tab Set the default actions when scanning from IJ Scan Utility or My Image Garden.
Settings (Attach to E-mail (Auto)) Dialog Settings (Attach to E-mail (Document)) Dialog Settings (Attach to E-mail (Photo)) Dialog Important • When the Settings dialog is displayed from My Image Garden, the Operation Panel) tab does not appear. (Scanning from the (General Settings) Tab Set the model to use, file size restriction on e-mail attachment, language for detecting text in images, and the folder in which to save images temporarily.
Settings (Auto Scan) Dialog Click Auto Scan on the (Scanning from a Computer) tab to display the Settings (Auto Scan) dialog. In the Settings (Auto Scan) dialog, you can make advanced scan settings to scan by automatically detecting the item type. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area Important • When the Settings dialog is displayed from My Image Garden, the setting items for Application Settings do not appear.
• Long narrow items such as panoramic photos • Reflective disc labels may not be scanned as expected. • Place items to be scanned on the platen correctly. Otherwise, items may not be scanned correctly. Refer to "Positioning Originals (Scanning from Computer)" for how to place items. Note • To reduce moire in scans, set Select Source to Magazine in the Settings (Document Scan) dialog or Settings (Custom Scan) dialog, then click Document or Custom in the IJ Scan Utility main screen.
Positioning Originals (Scanning from Computer) JPEG Image Quality You can specify the image quality of JPEG files. PDF Compression Select the compression type for saving PDF files. Standard It is recommended that you normally select this setting. High Compresses the file size when saving, allowing you to reduce the load on your network/server. Create a PDF file that supports keyword search Select this checkbox to convert text in images into text data and create PDF files that support keyword search.
Note • To add an application or folder to the pop-up menu, select Add... from the pop-up menu, then click (Plus) in the displayed dialog and specify the application or folder. Instructions Opens this guide. Defaults You can restore the settings in the displayed screen to the default settings.
Settings (Document Scan) Dialog Click Document Scan on the Scan) dialog. (Scanning from a Computer) tab to display the Settings (Document In the Settings (Document Scan) dialog, you can make advanced scan settings to scan items as documents. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area Important • When the Settings dialog is displayed from the Scan screen of My Image Garden, the setting items for Application Settings do not appear.
Color Mode Select the color mode in which to scan the item. Paper Size Select the size of the item to be scanned. When you select Custom, a screen in which you can specify the paper size appears. Select a Unit, then enter the Width and Height, and then click OK. Note • Click Defaults to restore the specified settings to the default settings. Resolution Select the resolution of the item to be scanned. The higher the resolution (value), the more detail in your image.
Printed materials are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Note • Scanning takes longer than usual when you enable Reduce moire. Reduce gutter shadow Reduces gutter shadows that appear between pages when scanning open booklets.
• Documents with patterned backgrounds In that case, select the Check scan results and specify save settings checkbox, and then rotate the image in the Save Settings dialog. (2) Save Settings Area File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format. Note • When you select the Save to a subfolder with current date checkbox, the date and four digits are appended to the set file name.
JPEG Image Quality You can specify the image quality of JPEG files. Important • This appears only when JPEG/Exif is selected in Data Format. Create a PDF file that supports keyword search Select this checkbox to convert text in images into text data and create PDF files that support keyword search. Important • This appears only when PDF or PDF (Multiple Pages) is selected in Data Format. Note • If text cannot be searched correctly, we recommend that you select 300 dpi or higher for Resolution.
You can specify the e-mail client you want to start from the pop-up menu. Start OCR Select this when you want to convert text in the scanned image into text data. You can specify the application from the pop-up menu. Do not start any application Saves to the folder specified in Save in. Note • To add an application or folder to the pop-up menu, select Add... from the pop-up menu, then click (Plus) in the displayed dialog and specify the application or folder. Instructions Opens this guide.
Settings (Save to PC (Auto)) Dialog Click Save to PC (Auto) on the (Save to PC (Auto)) dialog. (Scanning from the Operation Panel) tab to display the Settings In the Settings (Save to PC (Auto)) dialog, you can specify how to respond when saving images to a computer after scanning them from the operation panel by automatically detecting the item type. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area (1) Scan Options Area Paper Size Auto is selected. Resolution Auto is selected.
Important • The color tone may differ from the source image due to corrections. In that case, deselect the checkbox and scan. Note • Scanning takes longer than usual when you enable this function. (2) Save Settings Area File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format.
Note • PDF files that are searchable in the language selected in Document Language on the (General Settings) tab of the Settings dialog are created. Save to a subfolder with current date Select this checkbox to create a current date folder in the folder specified in Save in and save scanned images in it. The folder will be created with a name such as "20XX_01_01" (Year_Month_Date). If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Settings (General Settings) Dialog Click the (General Settings) tab to display the Settings (General Settings) dialog. In the Settings (General Settings) dialog, you can set the product to use, file size restriction on e-mail attachment, language to detect text in images, and folder in which to save images temporarily. Important • When the Settings dialog is displayed from My Image Garden, some options may not appear.
Folder to Save Temporary Files Displays the folder in which to save images temporarily. Click Browse... to specify the destination folder. Instructions Opens this guide. Defaults You can restore the settings in the displayed screen to the default settings.
Network Selection Screen You can select the scanners or printers to be used for scanning or printing over a network from your computer or the operation panel. Network Selection Screen In Product Name in the Settings (General Settings) dialog, select an item with "Network" after the product name from the list, then click Select that appears to the right of the product name to display the network selection screen.
• If you have changed the Bonjour service name after selecting your scanner or printer by Bonjour service name, reopen the network selection screen and select the new Bonjour service name from Scanners. Note • If the Bonjour service name of your scanner or printer does not appear or cannot be selected, check the following, click OK to close the screen, then reopen it and try selecting again.
Using Scanner Driver (ICA Driver) You can scan by starting the scanner driver from various applications. Refer to Help of Mac OS for how to scan. Note • Refer to "Image Corrections and Color Adjustments" for details on the setting procedures for image correction and color adjustment. • Refer to "General Notes (Scanner Driver)" for the scanner driver. • Refer to "Updating the Scanner Driver" for the scanner driver.
Image Corrections and Color Adjustments Correct images and adjust colors using the scanner driver (ICA (Image Capture Architecture) driver). Important • When image correction or color adjustment is applied to items without moire, dust/scratches, or faded colors, the color tone may be adversely affected. • Image correction results are not reflected in the trial scan screen. Note • Screens may vary depending on the application. • Selectable settings depend on Kind settings.
Document Applies Image Adjustment suitable for text documents. Note • If the image is not adjusted properly with Auto, specify the item type. • The color tone may change from the source image due to the Image Adjustment. In that case, set Image Adjustment to None. Reduce Dust Scanned photos may contain white dots caused by dust or scratches. Use this function to reduce such noise. None Dust and scratches will not be reduced. Low Select this to reduce small dust particles and scratches.
Grain Correction Use this function to reduce graininess (roughness) in photos taken with high-speed or sensitized film, etc. None Graininess will not be reduced. Low Select this when the photo is slightly grainy. Medium It is recommended that you normally select this setting. High Select this when the photo is very grainy. This can affect the gradation and sharpness of the image. Important • Correction may not be applied properly if the scan area is too small.
• How to place the item depends on your model and the item to be scanned. Unsharp Mask Emphasizes the outline of the subjects to sharpen the image. Descreen Reduces moire patterns. Printed materials are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Important • When enabling Descreen, disable Unsharp Mask. If Unsharp Mask is enabled, some moire effects may remain.
General Notes (Scanner Driver) The scanner driver (ICA (Image Capture Architecture) driver) is subject to the following restrictions. Keep these points in mind when using the scanner driver. Scanner Driver Restrictions • If the computer is shared among multiple users or when you have logged out and back on, a message indicating that the scanner driver is in use may appear. In that case, disconnect the USB cable from the computer, then reconnect it.
Updating the Scanner Driver Obtaining the Latest Scanner Driver Before Installing the Scanner Driver Installing the Scanner Driver 303
Obtaining the Latest Scanner Driver Upgrading your current scanner driver (ICA (Image Capture Architecture) driver) to the latest scanner driver may solve some problems you have experienced. To obtain the scanner driver, access our website and download the scanner driver for your model. Important • Scanner driver can be downloaded for free; however, Internet connection fees apply.
Before Installing the Scanner Driver Check the following points before installing the scanner driver (ICA (Image Capture Architecture) driver). Check these also when you cannot install the scanner driver. Machine Status • If the machine and computer are connected with a USB cable, disconnect the USB cable from the computer. Computer Settings • Close all running applications. • Log in as the administrator of the computer.
Installing the Scanner Driver Access our website via the Internet to download the latest scanner driver (ICA (Image Capture Architecture) driver). Follow these steps to install the downloaded scanner driver. 1. Mount the disk. Double-click the downloaded disk image file. The file is decompressed and the disk is mounted. 2. Start the installer. Double-click the ".pkg" file in the decompressed disk. Installation starts. 3. Install the driver. Follow the prompts to install.
Scanning Using AirPrint Using IJ Scan Utility Lite 307
Using IJ Scan Utility Lite What Is IJ Scan Utility Lite (Scanner Software)? Starting IJ Scan Utility Lite Scanning Documents and Photos Basics Scanning Originals Larger than the Platen (Image Stitch) Adjusting Cropping Frames in the Image Stitch Window Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder) Saving after Checking Scan Results IJ Scan Utility Lite Screens Important • Available functions and settings vary depending on your scanner or printer.
What Is IJ Scan Utility Lite (Scanner Software)? IJ Scan Utility Lite is an application for scanning documents, photos, and other items. Access all scanning functions to scan and save directly, from the icons in the IJ Scan Utility Lite main screen. Note • To use more functions, install the scanner driver and IJ Scan Utility from our website and use them.
Important • Some functions are available only when My Image Garden is installed. Note • To set the applications to integrate with, see Settings Dialog.
Starting IJ Scan Utility Lite Select Applications from Go menu of Finder, and then double-click Canon Utilities > IJ Scan Utility > Canon IJ Scan Utility Lite icon to start IJ Scan Utility Lite. Important • If an available scanner or printer is not detected, an error message appears a few moments after double-clicking the Canon IJ Scan Utility Lite icon.
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. In addition, scan with your favorite settings saved beforehand. 1. Place the item on the platen. Place the item face-down on the platen and align an upper corner of the item with the corner at the arrow (alignment mark) of the platen. 2. Start IJ Scan Utility Lite. 3. Click Settings..., then set the item type, resolution, etc. in the Settings dialog as required.
IJ Scan Utility Lite Screens IJ Scan Utility Lite Main Screen Settings Dialog Settings (Document Scan) Dialog Settings (Photo Scan) Dialog Settings (General Settings) Dialog 313
IJ Scan Utility Lite Main Screen Select Applications from Go menu of Finder, and then double-click Canon Utilities > IJ Scan Utility > Canon IJ Scan Utility Lite icon to start IJ Scan Utility Lite. You can complete from scanning to saving at one time by simply clicking the corresponding icon. Product Name Displays the name of the Bonjour service that IJ Scan Utility Lite is currently set to use.
Scan/save settings and the response after scanning can be specified in the Settings (Scan and Stitch) dialog. Driver Allows you to make image corrections and color adjustments when scanning. Save settings and the response after scanning can be specified in the Settings (Driver) dialog. OCR Scan text in scanned magazines and newspapers and display it in a specified application. E-mail You can send scanned images via e-mail. Scan/save settings and applications can be specified in the Settings (E-mail) dialog.
Settings Dialog The Settings dialog has two tabs: (Scanning from a Computer) and (General Settings). When you click a tab, the options available in the red frame switches; set the details of each function on each tab as needed. (Scanning from a Computer) Tab Set the default actions when scanning from IJ Scan Utility Lite or My Image Garden.
(General Settings) Tab Set the model to use, file size restriction on e-mail attachment, and language for detecting text in images.
Scanning Tips Positioning Originals (Scanning from Computer) Network Scan Settings 318
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen for scanning. If items are not placed correctly they may not be scanned correctly. Important • Do not place objects on the document cover. When you open the document cover, the objects may fall into your scanner or printer, resulting in malfunction. • Close the document cover when scanning. Placing Items Place items as described below to scan by detecting the item type and size automatically.
Important • Large items (such as A4 size photos) that cannot be placed away from the edges/arrow (alignment mark) of the platen may be saved as PDF files. To save in a format other than PDF, scan by specifying the data format. Multiple items: Allow 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen and items, and between items. Portions placed on the diagonally striped area cannot be scanned. 0.4 inch (1 cm) or more Note • In IJ Scan Utility, place up to 12 items.
Network Scan Settings You can connect your scanner or printer to a network to share it among multiple computers or scan images into a specified computer. Important • Multiple users cannot scan at the same time. • To scan over a network, enable Bonjour on your scanner or printer. Note • Complete the network settings of your scanner or printer beforehand by following the instructions on our website. • With network connection, scanning takes longer than USB connection.
The Settings (General Settings) dialog appears. 4. In Product Name, select an item with "Network" after the product name, then click Select that appears to its right. The network selection screen appears. 5. Click Scan-from-Operation-Panel Settings. The Scan-from-Operation-Panel Settings screen appears. 6. Select your scanner or printer from Scanners and click OK. 7. Return to the network selection screen, then click OK. The IJ Scan Utility main screen reappears. You can scan from the operation panel.
Scanning from Operation Panel Forwarding Scanned Data to Computer Using Operation Panel Basics Sending Scanned Data as E-Mail from Computer Setting Items for Scanning Using Operation Panel Setting Up Operation Panel with IJ Scan Utility (Windows) Setting Up Operation Panel with IJ Scan Utility (Mac OS) 323
Forwarding Scanned Data to Computer Using Operation Panel Before forwarding scanned data to the computer, check the following: • MP Drivers are installed. (Windows) If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from the Canon website. • The scanner driver is installed. (Mac OS) If the scanner driver is not yet installed, install the scanner driver from the Canon website. • The printer is connected to a computer correctly.
3. Select Save to computer. 4. Select a computer to forward scanned data. Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data for a network-connected computer. The Scan standby screen is displayed. Note • When you forward the scanned data to the computer using WSD (one of the network protocols supported in Windows), select Enable for WSD scan from this device on WSD setting on Common settings in LAN settings under Device settings.
A. Select the document type. Note • When you forward the scanned data to the computer searched using WSD, you cannot select the document type. Auto scan The printer detects the type of the originals automatically and the image is forwarded in the optimized size, resolution and data format. Important • Load originals properly according to their type; otherwise, some originals may not be scanned properly.
Setting Items for Scanning Using Operation Panel C. Displays how to load the original. D. Displays the screen to select the destination. 6. Load original on platen glass. 7. Press Color button for color scanning, or Black button for black & white scanning. Note • When you forward the scanned data to the computer using WSD, press the Color button. • If you select JPEG or TIFF for Format on the scan setting screen: The printer starts scanning and scanned data is forwarded to the computer.
If you want to scan originals with advanced settings, or if you want to edit or print scanned images: If you scan originals from a computer using My Image Garden, My Image Garden enables you to edit the scanned images, such as optimizing or trimming. In addition, you can edit or print the scanned images using the compatible application software to make better use of them.
Setting Items for Scanning Using Operation Panel You can change the scan settings such as the scan size, resolution, or data format. When the Scan standby screen is displayed, tap Settings to select the setting item. Flick to display setting items and tap the setting item to display the settings. Tap to specify the setting. Note • The scan setting cannot be specified under the following conditions: • When Auto scan is selected for Doc.
Scanning Photos and Documents You can specify the following setting items. • Scan size Select the size of the original. • Format Select the data format of the scanned data. • Scan res (Scan resolution) Select the resolution for scanning. • Reduce show-thru (Reducing show-through) Characters on the back may show through when scanning a thin document such as a newspaper. Select ON if characters seem to show through on the scanned document. This setting item is not available when Photo is selected for Doc.
Frequently Asked Questions Cannot Find Printer on Network Cannot Find Printer while Using Wireless LAN Network Key Unknown Network Print For other questions about network, click here.
Scanning Problems (Mac OS) Scan Results Are Unsatisfactory (Windows) Scan Results Are Unsatisfactory (Mac OS) Cannot Print/Scan from Smartphone/Tablet Cannot Set Correctly (Network) Cannot Find Printer on Check Printer Settings Screen Cannot Find Printer while Using Wireless LAN Printer Suddenly Cannot Be Used Network Key Unknown Administrator Password Set for Printer Unknown Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings Message Appears on Computer During Setup Checking Ne
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use.
Checking Wireless Router SSID for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printing Is Slow Ink Level Not Shown on Printer Status Monitor (Windows) Packets Are Sent Constantly (Windows) Wireless Direct Cannot Print or Connect Printer Suddenly Cannot Be Used Cannot Access to Internet on Wireless LAN from Communication Device LAN Setting Tips/Chang
Connecting the Printer to a Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and computer/smartphone/tablet using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. • Wireless Direct Connect the printer and computer/smartphone/tablet without using a wireless router. For more on connection method, see Available Connection Methods.
Troubleshooting See Network Settings and Common Problems for troubleshooting on network connection. Notice/Restriction See below for details.
Restrictions When connecting another device while a device (such as a smartphone) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connect via wireless router • Make sure your device and the wireless router are connected.
• In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, then configure settings again. • Devices connected to the printer using Wireless Direct cannot communicate with each other. • Firmware updates for the printer are not available while using Wireless Direct.
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems 339
Cannot Find Printer on Network While performing printer setup: Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen While using printer: Cannot Find Printer while Using Wireless LAN 340
Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) If the printer cannot be found and the Check Printer Settings screen appears after searching the printer by Automatic search on the Search for Printers screen, click Redetect and search for the printer again by the IP address on the Search for Printers screen. If the printer has not been found after searching it by the IP address, check network settings.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Power Status Are printer and network device (router, etc.) turned on? Make sure the printer is turned on. Confirming that the Power Is On Make sure network device (router, etc.) is turned on. If printer or network device is off: Turn on printer or network device. It may take a while for the printer and network device to become ready for use once they are turned on.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network. If you cannot view any web pages: Click Cancel on the Check Printer Settings screen to cancel to set up the network communication. After that, configure the computer and network device.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Printer's Wireless LAN Settings Is printer set to allow wireless communication? Make sure the or icon is displayed on the touch screen. If icon is not displayed: The printer is not set to allow wireless communication. Click Wireless LAN Setup Information on the Check Printer Settings screen to check the status and turn on wireless communication on the printer.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Wireless LAN Environment Is printer connected to wireless router? Use the icon on the touch screen to make sure the printer is connected to the wireless router. If icon is displayed: • Checking wireless router location After checking the wireless router setting, make sure the printer is not placed far away from the wireless router. The printer can be up to 50 m (164 ft) from the wireless router indoors.
The printer and wireless router should be connected using 2.4 GHz bandwidth. Make sure the wireless router for the printer's destination is configured to use 2.4 GHz bandwidth. Important • Depending on the wireless router, note that different SSID is assigned for a bandwidth (2.4 GHz or 5 GHz) or its usage (for PC or game machine) using alphanumeric characters at the end of SSID. Check the SSID of the wireless router for the printer on the touch screen.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device. To check the printer's IP address, print out the network settings information or use the operation panel to display it. • Display on the touch screen. LAN settings • Print the network settings.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Security Software Settings Disable block in firewall function temporarily. The firewall of your security software or operation system for computer may limit communication between the printer and your computer. Check the firewall setting of your security software or operation system or the message shown on your computer and disable block temporarily.
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Wireless Router Settings Check wireless router settings. Check wireless router network connection settings, such as IP address filtering, MAC address filtering, encryption key, and DHCP function. Make sure the same radio channel is assigned to the wireless router and the printer.
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen If you cannot proceed beyond the Printer Connection screen or the Connect Cable screen, check the following. Check1 Make sure USB cable is securely plugged in to printer and computer. Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer. Check the items below only if you cannot proceed beyond the Printer Connection screen.
◦ If the Installation Failure screen appears: 1. Click Start Over. 2. Click Exit on Start Setup screen and finish setup. ◦ If the Connection failed. screen appears: 1. Click Next. 2. Click Next on displayed screen. 3. Click Back to Top on Select Printer screen. 4. Click Exit on Start Setup screen and finish setup. 3. Turn off printer. 4. Restart computer. 5. Make sure you have no application software running. 6. Redo setup according to instructions on Canon website.
Cannot Find Printer while Using Wireless LAN Note • This section describes the troubleshooting when using the computer. For the troubleshooting when using the smartphone or the tablet: Cannot Print/Scan from Smartphone/Tablet Check1 Make sure the printer is turned on. Check2 Is icon displayed on the touch screen? If the icon is not displayed, select Active on WLAN active/inactive in Wireless LAN under LAN settings. Check3 Make sure printer setup is complete. If it is not, perform setup.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router is nearby, it may cause interference. Place the wireless router as far away from interference sources as possible. Note • Though an antenna is attached to most wireless routers, note that some of them have it inside. Make sure wireless signal is strong. Monitor signal status and move printer and wireless router as necessary.
Network Connection Problems Printer Suddenly Cannot Be Used Network Key Unknown Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings 354
Printer Suddenly Cannot Be Used Cannot Communicate with Printer Following Network Settings Change Cannot Communicate with Printer via Wireless LAN Cannot Communicate with Printer Using Wireless Direct Cannot Print or Scan from a Computer Connected to the Network Cannot Communicate with Printer Following Network Settings Change It may take a while for the computer to obtain an IP address, or you may need to restart your computer.
To check the settings of the wireless router, refer to the instruction manual provided with it or contact its manufacturer. To check the current network settings of the printer, print out the network setting information. Printing Network Settings If the printer network settings do not match with those of the wireless router, change the network settings of the printer to match with those of the wireless router.
• For Windows: Use the Setup CD-ROM or follow the instructions on the Canon website. • For Mac OS: Follow the instructions on the Canon website. • Positioning: Make sure there are no obstacles between the wireless router and the printer. Cannot Communicate with Printer Using Wireless Direct Check1 Check the power status of printer and other devices (smartphone or tablet). Turn on the printer or devices. If the power is already turned on, turn it off and on again.
• Display on the touch screen. LAN settings • Print the network settings. Printing Network Settings Check6 Make sure the printer is not placed too far away from the device. Place the device and printer where there are no obstacles between them. Wireless communication between different rooms or floors is generally poor. Wireless communication can be impeded by building materials containing metal or concrete.
Network Key Unknown WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect Setting an Encryption Key WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect For more on setting up a wireless router, see the instruction manual provided with the wireless router or contact its manufacturer. Make sure your computer can communicate with the wireless router. Note • For Windows, set up the printer to match the wireless router settings using IJ Network Device Setup Utility.
• Using WEP The key length, key format, key to use (one of 1 to 4), and authentication method must be the same for the wireless router, the printer, and your computer. To communicate with a wireless router that uses automatically generated WEP keys, you must set the printer to use the key generated by the wireless router, entering it in hexadecimal format. ◦ For Windows: When the WEP Details screen appears after you click Search...
Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings When you replace a wireless router, redo the network setup for the printer. • For Windows: Use the Setup CD-ROM or follow the instructions on the Canon website. • For Mac OS: Follow the instructions on the Canon website. If this does not solve the problem, see below.
With Encryption On, Cannot Communicate with Printer After Changing Encryption Type at Wireless Router If you change the encryption type for the printer and it subsequently cannot communicate with the computer, make sure the encryption type for the computer and the wireless router matches the type set for the printer.
Other Network Problems Checking Network Information Restoring to Factory Defaults Message Appears on Computer During Setup Packets Are Sent Constantly (Windows) 363
Checking Network Information Checking Printer IP Address or MAC Address Checking Computer IP Address or MAC Address Checking Communication Between the Computer, the Printer, and the Wireless Router Checking Network Setting Information Checking Printer IP Address or MAC Address To check the printer's IP Address or MAC address, print out the network settings information or use the operation panel to display it. • Display on the touch screen. LAN settings • Print the network settings.
1. Select System Preferences from Apple menu, and then click Network. 2. Make sure network interface used by computer is selected, and then click Advanced. Make sure Wi-Fi is selected as network interface. 3. Check the IP address or MAC address. Click TCP/IP to check the IP address. Click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1.
"XXX.XXX.XXX.XXX" is the IP address of the target device. A message such as the following appears. 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms --- XXX.XXX.XXX.XXX ping statistics --3 packets transmitted, 3 packets received, 0% packet loss If packet loss is 100%, communication is not taking place. Otherwise, computer is communicating with target device.
Restoring to Factory Defaults Important • For Windows: Initialization erases all network settings on the printer, making printing or scanning operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
Printing Problems Printing Does Not Start No Ink Comes Out Paper Does Not Feed Properly/"No Paper" Error Cannot Print on Disc Label Print Results Are Unsatisfactory 368
Printing Does Not Start Check1 Make sure printer is securely plugged in and press ON button to turn it on. The POWER lamp flashes while the printer is initializing. Wait until the POWER lamp stops flashing and remains lit. Note • If you are printing large data such as photos or other graphics, printing may take longer to start. The POWER lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.
Deleting the Undesired Print Job • For Mac OS: Deleting the Undesired Print Job Check5 Make sure that the paper output tray is at the normal print position. While printing other than disc label printing, pull out the paper output tray to the normal print position. If the paper output tray is at the disc label print position, pull out it to the normal print position and select OK on the touch screen.
Check8 Is print data extremely large? (Windows) Click Print Options on Page Setup sheet of the printer driver. Then set Prevention of Print Data Loss to On in the dialog that appears. * This may reduce print quality. Check9 If printing from your computer, restart computer.
No Ink Comes Out Check1 Has ink run out? Open the scanning unit / cover and check the ink lamp. Checking the Ink Status with the Ink Lamps Check2 Is orange tape or protective film still on ink tank? Make sure all the protective film is peeled off to expose the Y-shaped air hole, as shown below (A). If the orange tape remains on the ink tank (B), peel it off.
Paper Does Not Feed Properly/"No Paper" Error Check1 Make sure paper is loaded. Loading Paper Check2 When loading paper, consider the following. • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. • When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load limit.
If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object. Note • If the feed slot cover is opened, close it slowly. Check7 Clean paper feed roller. Cleaning Paper Feed Rollers Note • Cleaning the paper feed roller abrades it, so do this only when necessary.
Cleaning Cassette Pads Check9 Are transport unit cover and rear cover attached properly? See Rear View for the positions of the transport unit cover and the rear cover. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Cannot Print on the Disc Label Disc Label Printing Does Not Start Disc Tray Does Not Feed Properly Disc Tray Jammed Disc Label Printing Does Not Start Check1 Is disc tray placed properly? Place the disc tray properly again and tap OK on the touch screen. Use the disc tray supplied with this printer ("M" is on the upper side). For more on placing the disc tray, see Placing a Printable Disc.
Disc Tray Jammed Pull out the disc tray gently. If the disc tray cannot be pulled out, turn the printer off and turn it back on again. The disc tray will automatically be ejected. When the disc tray is pulled out, place the disc tray ("M" is on the upper side) again and retry printing. For more on placing the disc tray, see Placing a Printable Disc. If the disc tray is still jammed, check if there is a problem with the printable disc.
Print Results Are Unsatisfactory If the print results are unsatisfactory due to white streaks, misaligned lines, or uneven colors, check the paper and print quality settings first. Check1 Do page size and media type settings match size and type of loaded paper? If these settings do not match, it is not possible to obtain the proper result. If you are printing a photograph or an illustration, an incorrect paper type setting may reduce the quality of the printout color.
Note • When printing from a PictBridge (Wireless LAN) compliant device, set the print quality setting using the operation panel. This setting cannot be made on the PictBridge (Wireless LAN) compliant device. Check3 If problem is not resolved, check other causes.
Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear Printing Is Blurry Colors Are Wrong 380
White Streaks Appear Check1 Check paper and print quality settings. Print Results Are Unsatisfactory Check2 Check status of ink tanks. Replace ink tank if ink has run out. Replacing Ink Tanks Check3 Is orange tape or protective film still on ink tank? Make sure all the protective film is peeled off to expose the Y-shaped air hole, as shown below (A). If the orange tape remains on the ink tank (B), peel it off.
Perform print head deep cleaning. If the problem is not resolved after performing print head deep cleaning, turn off the printer and perform print head deep cleaning again 24 hours later. • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair.
Lines Are Misaligned Check1 Check paper and print quality settings. Print Results Are Unsatisfactory Check2 Perform print head alignment. If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note • If the problem is not resolved after performing the print head alignment, perform print head alignment manually from your computer.
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check1 Check paper and print quality settings. Print Results Are Unsatisfactory Check2 Check paper type. Make sure you are using the right paper for what you are printing. Supported Media Types Check3 Correct curl before loading paper. When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is.
1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.
To open the printer driver setup window, see How to Open the Printer Driver Setup Window. ◦ For Mac OS: In the Canon IJ Printer Utility2, select Custom Settings in the pop-up menu, select Prevent paper abrasion check box, and then click Apply. To open the Canon IJ Printer Utility2, see Opening the Canon IJ Printer Utility2. If intensity is set high, reduce intensity setting and try printing again.
Check10 Set longer ink drying time. This allows the printed surface to dry, preventing smudges and scratches. • For Windows: 1. Make sure printer is turned on. 2. Open printer driver setup window. How to Open the Printer Driver Setup Window 3. Click Maintenance tab and Custom Settings. 4. Drag Ink Drying Wait Time slide bar to set wait time and click OK. 5. Check message and click OK. • For Mac OS: 1. Make sure printer is turned on. 2. Open Canon IJ Printer Utility2.
Vertical Line Next to Image Check Is loaded paper size correct? If the loaded paper is larger than the size you specified, a vertical line may appear in the margin. Set the paper size to match the loaded paper. Print Results Are Unsatisfactory Note • The direction of the vertical line pattern may vary depending on the image data or the print setting. • This printer performs automatic cleaning when necessary to keep printouts clean. A small amount of ink is ejected for cleaning.
Scanning Problems (Mac OS) Scanning Problems IJ Scan Utility Error Messages IJ Scan Utility Lite Error Messages Scanner Driver (ICA Driver) Error Messages 389
Scanning Problems Scanner Does Not Work Scanner Driver Does Not Start 390
Scanner Does Not Work Check 1 Make sure that your scanner or printer is turned on. Check 2 Connect the USB cable to a different USB port on the computer. If the USB cable is connected to a USB hub, remove it from the USB hub and connect it to a USB port on the computer. Check 3 Check 4 With network connection, check the connection status and reconnect as needed. Check 5 Restart the computer.
Scanner Driver Does Not Start Check 1 Make sure the scanner driver (ICA (Image Capture Architecture) driver) is installed. If not installed, install the scanner driver from our website. Check 2 Select your scanner or printer on the application's menu. Note • The operation may differ depending on the application. Check 3 Make sure that the application supports the ICA driver. You cannot start the scanner driver from applications not supporting the ICA driver.
IJ Scan Utility Lite Error Messages If an error message for IJ Scan Utility Lite appears, check the error code and follow the corresponding solution. Error Code Error Message Solution 152 There is not enough memory. Exit other applications to increase available memory. • The memory required to start IJ Scan Utility Lite cannot be obtained; exit other applications. 153 The image you attempted to scan is in a size that cannot be opened in the specified application.
242 Cannot write file. • Check the access permission on the folder in Save in in the corresponding Settings dialog. 243 Cannot read file. • Check the access permission on the folder in Save in in the corresponding Settings dialog. 244 You do not have the required privileges to access the specified folder. • Grant access permission to the specified folder. 245 Text could not be detected. Make sure that the following conditions do not apply.
Mechanical Problems Power Does Not Come On Power Shuts Off By Itself USB Connection Problems Cannot Communicate with Printer via USB Touch Screen Shows Wrong Language 395
Power Does Not Come On Check1 Press ON button. Check2 Make sure power plug is securely connected to printer, and then turn it back on. Check3 Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn it on again. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Power Shuts Off By Itself Check If printer is set to turn off automatically after a certain time, disable this setting. If you have set the printer to turn off automatically after a specified time, the power will shut off by itself once that time has elapsed. • If you are using a Windows and if you do not want the printer to turn off automatically: Open the printer driver setup window and in Auto Power in Maintenance sheet, select Disable for Auto Power Off.
USB Connection Problems Printing or Scanning Is Slow/Hi-Speed USB Connection Does Not Work/"This device can perform faster" Message Appears (Windows) If your system environment does not support Hi-Speed USB, the printer operates at the slower speed of USB 1.1. In this case, the printer works properly but printing or scanning speed may slow down due to the communication speed. Check following to make sure your system environment supports Hi-Speed USB connection.
Cannot Communicate with Printer via USB Check1 Make sure printer is turned on. Check2 Connect USB cable properly. As the illustration below, the USB port is at the back of the printer. Make sure Enable bidirectional support is selected in Ports sheet of properties dialog box of printer driver.
Installation and Download Problems Cannot Install MP Drivers Easy-WebPrint EX Does Not Start or Easy-WebPrint EX Menu Does Not Appear (Windows) 400
Cannot Install MP Drivers For Windows: For Mac OS: For Windows: • If installation does not start when you insert Setup CD-ROM: Follow the instructions below to start the installation. 1. Make the following settings. ◦ In Windows 10, click Start button > File Explorer, and then click This PC from list on left. ◦ In Windows 8.1 or Windows 8, select Explorer icon in Taskbar on Desktop, and then select This PC (Computer for Windows 8) from list on left.
• If you cannot get past the Printer Connection screen: Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen • Other cases: Reinstall the MP Drivers. If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers. Deleting the Unnecessary MP Drivers Reinstall the MP Drivers with the Setup CD-ROM or install them from the Canon website.
Updating MP Drivers in Network Environment (Windows) Download the latest MP Drivers. The latest MP Drivers for your model are available for download on the Canon website. Uninstall the existing MP Drivers and follow the installation instructions to install the latest MP Drivers that you downloaded. In the connection method selection screen, select Use the printer with wireless LAN connection. The printer is detected automatically in the network.
Errors and Messages An Error Occurs Message Appears 404
An Error Occurs If an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appears automatically. Take the appropriate action described in the message. When an error occurs, a message is displayed on the computer screen or the touch screen. Depending on the error, a Support Code (error number) is displayed on the computer screen or the touch screen.
When a Support Code and a message are displayed on the touch screen: For details on how to resolve errors, see List of Support Code for Error. Note • For details on how to resolve errors without Support Codes, see Message Appears.
Message Appears This section describes some of the errors and messages that may appear. Note • A support code (error number) is displayed on the computer or on the touch screen for some errors. For details on errors that have support code, see List of Support Code for Error. If a message appears on the touch screen, see below. Message Appears on Touch Screen If a message appears on the computer, see below.
Note • See Unplugging the Printer to unplug the printer correctly. • Cannot connect to the server. Please wait a while and try again. The printer cannot connect to the server due to a communication error. Tap OK on the touch screen and try again after a while. Error Regarding Automatic Duplex Printing Is Displayed Check See Automatic Duplex Printing Problems and take the appropriate action.
If you use the printer over a LAN, make sure the printer is connected to the network with a LAN cable or is correctly set up for network use. Check3 Make sure MP Drivers are installed correctly. Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and reinstall them from the Setup CD-ROM or the Canon website. When printer is connected to your computer with a USB cable, check device status from your computer.
Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed (Windows) If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a screen appears asking for permission to send the printer and application usage information every month for about ten years. Read the information on the screen and follow the instructions below. • If you agree to participate in survey program: Click Agree and follow the on-screen instructions. The printer usage information is sent via the Internet.
• Changing confirmation screen setting: 1. Make the following settings. ◦ In Windows 10, right-click Start button and select Programs and Features. ◦ In Windows 8.1 or Windows 8, select Control Panel from Settings charm on Desktop > Programs > Programs and Features. ◦ In Windows 7, or Windows Vista, select Start menu > Control Panel > Programs > Programs and Features. Note • A confirmation/warning dialog box may appear when installing, uninstalling or starting up software.
• If you agree to participate in survey program: Click Agree and follow the on-screen instructions. The printer usage information is sent via the Internet. Once you have completed the procedure, the information is subsequently sent automatically and the confirmation screen does not reappear.
2. Select Applications from Go menu of Finder, double-click Canon Utilities folder and Inkjet Extended Survey Program folder. 3. Move Canon Inkjet Printer/Scanner/Fax Extended Survey Program.app file to Trash. 4. Restart computer. Empty Trash and restart your computer. • Changing setting: To display the confirmation screen every time the printer usage information is sent or to resume surveying, follow the procedure below. 1.
List of Support Code for Error Support code appears on the touch screen and your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code displayed on the touch screen and computer screen and take the appropriate action in response.
5700 5B00 5B01 5C02 • 6000 to 6ZZZ 6000 6001 6004 6500 6502 6800 6801 6900 6901 6902 6910 6911 6930 6931 6932 6933 6934 6935 6936 6937 6938 6940 6941 6942 6943 6944 6945 6946 6950 6960 6A80 6A81 6A82 • A000 to ZZZZ B202 B203 B204 B205 C000 For paper jam support codes, see also List of Support Code for Error (Paper Jams).
List of Support Code for Error (Paper Jams) If paper jams, remove it following the appropriate procedure as shown below.
1300 Cause Paper is jammed when feeding paper from rear tray. What to Do If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from the rear tray following the instructions below. 1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier. Hold the paper with both hands, and pull it out slowly so as not to tear it. Note • If you cannot pull out the paper, turn the printer back on without pulling forcibly.
If you turned off the printer in step 1, the print data that was sent to the printer is erased. Redo the printing. Note • When reloading the paper, make sure you are using suitable paper and loading it correctly. • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
1303 Cause Paper is jammed when feeding paper from cassette. What to Do If the paper fed from the cassette is jammed, try to remove the paper from the following locations. • Paper output slot 1300 • Inside of the printer Paper Is Jammed inside Printer • Feeder at the cassette Pull out the cassette, and then remove the paper slowly with both hands. If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open the rear cover and to remove the paper.
2. Open rear tray cover and then pull up paper support. 3. Detach rear cover. Pull out the rear cover. 4. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1. Detach transport unit cover. Lift up the transport unit cover and pull out it.
2. Slowly pull out paper. Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover. 5. Attach rear cover. Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely.
If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
1304 Cause Paper is jammed when performing automatic duplex printing. What to Do If the paper is jammed when performing automatic duplex printing, try to remove the paper from the following locations. • Paper output slot 1300 • Inside of the printer Paper Is Jammed inside Printer If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open the rear cover and to remove the paper.
4. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1. Detach transport unit cover. Lift up the transport unit cover and pull out it. 2. Slowly pull out paper.
Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover. 5. Attach rear cover. Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely.
1313 Cause Paper is jammed as printer pulled in printed paper. What to Do If the paper is jammed as the printer pulled in the printed paper, try to remove the paper from the following locations. • Paper output slot 1300 • Inside of the printer Paper Is Jammed inside Printer If the measures above do not solve the problem, see Removing Jammed Paper from Rear Side to open the rear cover and to remove the paper.
4. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1. Detach transport unit cover. Lift up the transport unit cover and pull out it. 2. Slowly pull out paper.
Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover. 5. Attach rear cover. Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely.
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper either from the paper output slot or from the transport unit, or if the jammed paper remains inside the printer, remove the paper following the instructions below. Note • If paper becomes jammed during printing and you need to turn off the printer to remove it, tap Stop to stop the printing before you turn off the printer. 1. Turn off printer and unplug it. 2. Open scanning unit / cover.
4. Hold jammed paper firmly in both hands. If the paper is rolled up, pull out it. 5. Slowly pull out paper, so as not to tear it. Pull out the paper at an angle of about 45 degrees. 6. Make sure all jammed paper is removed.
If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and remove any remaining paper. • Any paper left under the print head holder? • Any small bits of paper left in the printer? • Any paper left in the left and right empty spaces (B) in the printer? 7. Close scanning unit / cover. To close the scanning unit / cover, hold it up once, and then take it down gently. All jobs in the print queue are canceled. Redo the printing.
1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. • Align the paper guides with the both edges of the paper when you load paper in the rear tray. • Set paper information for the paper in the rear tray. After carrying out the above measures, select OK on the touch screen.
1003 Cause Possible causes include the following. • There is no paper in the cassette. • Paper is not loaded in the cassette properly. What to Do Take the corresponding actions below. • Load paper in the cassette. • Align the paper guides with the both edges of the paper when you load paper in the cassette. • Set paper information for the paper in the cassette. After carrying out the above measures, select OK on the touch screen.
1200 Cause Scanning unit/cover is open. What to Do Close the scanning unit / cover and wait for a while. Do not close it while you are replacing an ink tank.
1401 Cause Print head may be damaged. What to Do Contact your nearest Canon service center to request a repair.
1600 Cause If the lamp on the ink tank is flashing, ink may have run out. What to Do Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, select OK on the printer with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition. Note • If multiple ink lamps are flashing, check the status of each ink tank.
1660 Cause An ink tank is not installed. What to Do Install the ink tank.
1688 Cause The ink has run out. (The lamp on the ink tank flashes.) What to Do Replace the ink tank and close the scanning unit (cover). Printing under the current condition may damage the printer. If you want to continue printing in this condition, you need to disable the function for detecting the remaining ink level. Touch Stop on the printer for at least 5 seconds, and then release it. With this operation, disabling the function for detecting the remaining ink level is memorized.
1689 Cause Printer detected ink out condition (The lamp on the ink tank flashes). What to Do Replace the ink tank and close the scanning unit (cover). An ink tank that was once empty is installed. Printing under the ink out condition may damage the printer. If you want to continue printing, you need to disable the function for detecting the remaining ink level. To disable this function, touch Stop on the printer for at least 5 seconds, and then release it.
1700 Cause Ink absorber is almost full. What to Do Select OK on the touch screen to continue printing. Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
1890 Cause Tape for securing print head holder during transportation may still be attached. What to Do Open the scanning unit / cover and make sure the tape for securing the print head holder during transportation has been removed. If the tape is still there, remove it and close the scanning unit / cover. If this does not solve the problem, contact your nearest Canon service center to request a repair.
2110 Cause Paper settings for printing or copying do not match cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the touch screen.
What to Do Select OK on the touch screen again to display the screen below. Select the appropriate action. Note • Depending on settings, some of the options below may not appear. Print with the loaded paper. Select this option to print or copy onto the paper in the cassette without changing the paper settings. For example, if the print or copy paper setting is A5, and cassette paper information is set to A4, the A5 size setting is used to print or copy onto the paper in the cassette.
For example, if the print or copy paper setting is A5, and cassette paper information is set to A4, change the paper in the cassette to A5 paper and proceed with printing or copying. Once you have inserted the cassette after changing the paper, the screen for setting cassette paper information appears. Set paper information for the paper in the cassette. Note • If you do not know what paper information to set, tap (Back). The previous screen appears, showing the paper size and media type.
2900 Cause Scanning print head alignment sheet failed. What to Do Select OK on the touch screen and follow the instructions below. • Make sure the print head alignment sheet is set in the correct position and orientation on the platen glass. • Make sure the platen glass and the print head alignment sheet are not dirty. • Make sure the loaded paper is correct. For automatic print head alignment, load A4 or Letter-sized plain paper. • Make sure the print head nozzle is not clogged.
2901 Cause Print head alignment pattern has been printed and printer is waiting to scan sheet. What to Do Scan the printed alignment pattern. 1. Load print head alignment sheet on platen glass. Place the printed side down and align the mark alignment mark in the upper left corner of the sheet with the . 2. Slowly close the document cover and select OK on printer's touch screen. The printer starts scanning the print head alignment sheet, and automatically adjusts the print head position.
4103 Cause Cannot perform printing with current print settings. What to Do Tap Stop on the touch screen to cancel printing. Then change the print settings and retry printing.
5011 Cause Printer error has occurred. What to Do Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5012 Cause Printer error has occurred. What to Do Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5100 Cause Printer error has occurred. What to Do Cancel printing and turn off the printer. Check the following: • Make sure print head holder motion is not impeded by tapes for securing the print head holder during transportation, jammed paper, etc. Remove any impediment. • Make sure the ink tanks are properly installed. Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5200 Cause Printer error has occurred. What to Do Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
5B00 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
6000 Cause Printer error has occurred. What to Do If the paper is jammed, remove it depending on the jammed location and cause. List of Support Code for Error (Paper Jams) Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
C000 Cause Printer error has occurred. What to Do Cancel printing and turn off the printer. Check the following: • Make sure print head holder motion is not impeded by tapes for securing the print head holder during transportation, jammed paper, etc. Remove any impediment. • Make sure the ink tanks are properly installed. Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.