ENGLISH Preparation Shooting Playback/Erasing Photo of PowerShot A540 Menus and Settings Printing Downloading Images to a Computer Basic Camera User Guide Please Read This First This guide explains how to prepare the camera and use its basic features. CDI-E220-010 © 2006 CANON INC.
Flowchart and Reference Guides The following guides are available. Refer to them as necessary according to the flowchart below. For information on included items and items sold separately System Map Preparations • Installing the batteries and memory card • Setting the date, time and language Shooting Playback/Erasing Basic Camera User Guide (This Guide) • Read this first.
Preparations 1. Installing the batteries. 1. Slide the memory card slot/battery cover lock in the direction of the arrow and open the cover. 2. Insert the 2 supplied AA-size alkaline batteries, or separately sold AA-size NiMH batteries. Negative end (–) Positive end (+) Preparations Î See the Advanced Guide: Battery Handling (p. 102) 2. Inserting the Memory Card. 1. Insert the memory card until it clicks into place. Front 2. Close the memory card slot/battery cover.
To Remove the Memory Card Push the memory card with your finger until the memory card clicks and then release it. You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. * SD stands for Secure Digital, a copyright protection system.
First Time Settings Setting the Date/Time a b c Preparations 1. Press the power button (a). 2. Use the or button to select an item and the or button to change its value (b). 3. Confirm that the correct time is displayed and press the FUNC./SET button (c). The date and time can also be set in the Set up menu (p. 13). The date/time setting screen will appear when the camera power is turned on for the first time, or when the capacity of the lithium date/time battery is depleted.
Shooting 1. Press the power button. Power button The start-up sound will play and the start-up image will display in the LCD monitor. • Pressing the power button again turns the power off. • Pressing the power button while pressing and holding the DISP. button will turn on the mute setting which will mute all sounds except for warning sounds. Î See the Advanced Guide: Using the LCD Monitor (p. 15) Î See the Advanced Guide: Power Saving Function (p. 21) Î See the Advanced Guide: Set up Menu (p.
Reviewing an Image Right After Shooting After a shot is taken, the image appears in the LCD monitor for approximately 2 seconds. You can continue to display images regardless of the review duration setting with the following procedures. • Keeping the shutter button pressed after a shot. • Pressing the FUNC./SET or DISP. button while the image is displayed in the LCD monitor. To stop displaying the image, press the shutter button halfway. Î See the Advanced Guide: Review (p. 24) Î See Erasing (p.
Night scene Allows you to capture human subjects against the backdrop of an evening sky or night scene. The flash is directed at the person and the shutter speed is slow, so both the person and the background can be beautifully shot. (Special Scene) You can shoot with the most appropriate settings for the scene. Night Snapshot Allows you to take snapshots of people against twilight or night backgrounds by reducing the effects of camera shake even without using a tripod.
Stitch Assist Allows you to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. Î See the Advanced Guide (p. 43) Image zone Shoots a movie when you press the shutter button.
Using the Zoom 1. Press the zoom lever toward or . The zoom can be adjusted from 35 mm – 140 mm (focal length) in 35mm film equivalent terms. Wide Angle: Zooms out from the subject. Telephoto: Zooms in on the subject. Using the Flash 1. Press the button to cycle through flash settings. Each time you press the button, the flash settings will change. With the red-eye reduction function on: With the red-eye reduction function off: Flash settings cannot be used in some shooting modes.
You are recommended to shoot with the camera attached to a tripod or other device if the camera shake warning icon appears. When the LCD monitor is on and flash recharging begins, the lamp blinks orange and the LCD monitor turns off. When recharging ends, the orange lamp turns off and the LCD monitor turns on. The time required for flash recharging will change depending on usage conditions and remaining battery power. Î See the Advanced Guide: Rec. Menu (p.
Shooting Close-ups (Macro) 1. Press the button. To cancel the macro mode, press the or display. button to turn off the This setting cannot be set in some shooting modes. Use this mode to shoot close-ups of flowers or small items. Image Area at Minimum Shooting Distance from End of Lens to Subject PowerShot A540: • Maximum wide angle setting: 60 x 45 mm (2.4 x 1.8 in.) Minimum shooting distance: 5 cm (2.0 in.) Macro • Maximum telephoto setting: 84 x 63 mm (3.3 x 2.5 in.
Playback 1. Set the mode switch to (playback)(a). The last recorded image will appear in the LCD monitor. a 2. Use the or button to display the image you wish to view (b). b Use the button to move to the previous image and the button to move the next image. Holding the button down advances the images more rapidly, but shows them less clearly. Î See the Advanced Guide for the various playback methods available. Erasing or button to select an image to erase (a) and press the button (b).
Menus and Settings Settings for the shooting, playback or print modes or such camera settings as the date/time and sounds are set using the FUNC., Rec., Play, Print, Set up or My Camera menu. FUNC. Menu This menu sets many of the common shooting functions. a e b c d a Set the mode switch to (shooting). b Press the FUNC./SET button. c Use the or button to select a menu item. • Some items may not be selectable in some shooting modes. d Use the or button to select an option for the menu item.
Rec., Play, Print, Set up and My Camera Menus Convenient settings for shooting, playback or printing can be set with these menus. (Set up) Menu (Rec.) Menu (My Camera) Menu e a b You can switch between menus with the or button when this part is selected. c d a Press the MENU button. b Use the or button to switch between menus. • You can also use the zoom lever to switch between menus. c Use the or button to select a menu item. • Some items may not be selectable in some shooting modes.
Printing Connect the camera to a direct print compatible printer*1 with a cable and simply press the button on the camera. 1. Connect the camera to a direct print compatible printer and turn on the printer’s power. Canon Brand Printers Camera Interface Cable SELPHY CP Series Compact Photo Printers*2 PIXMA Series/ SELPHY DS Series Bubble Jet Printers *1 Since this camera uses a standard protocol (PictBridge), you can use it with other PictBridge-compliant printers in addition to Canon-brand printers.
2. Turn on the power in playback mode and confirm that , or is displayed in the upper left of the LCD monitor (a). • The button will light blue. • The displayed icon will vary according to the printer model. 3. Select an image to print using the and press the The or button (b) button (c). button will blink blue and printing will start. a c b See the Advanced Guide: Setting the DPOF Print Settings (p.
Downloading Images to a Computer The following methods can be used to download images recorded by the camera to a computer. Some methods, depending on the OS used, may not be available. Please read System Requirements (p. 17) in advance.
System Requirements Please install the software on a computer meeting the following minimum requirements. Windows OS Windows 98 Second Edition (SE) Windows Me Windows 2000 Service Pack 4 Windows XP (including Service Pack 1 and Service Pack 2) Computer Model The above OS should be pre-installed on computers with built-in USB ports.
Preparing to Download Images Ensure that you install the software first before connecting the camera to the computer. Items to Prepare • Camera and computer • Canon Digital Camera Solution Disk supplied with the camera • Interface cable supplied with the camera 1. Install the software. 1. Place the Canon Digital Camera Solution Disk in the computer’s CD-ROM drive. Double-click the [Canon Digital Camera Installer] icon in the CD-ROM window. When the installer panel appears, click [Install]. 2.
2. Connecting the camera to a computer. 1. Use the supplied interface cable to connect the computer’s USB port to the camera’s DIGITAL terminal. Slip your fingernail under the lower end of the camera’s terminal cover, lift it open and plug the interface cable in all the way. USB Port DIGITAL Terminal Interface Cable Interface Cable 2. Set the camera’s mode switch to (playback) and turn on the power. The camera and computer will be able to communicate.
Downloading Images to a Computer A window allowing you to set the preferences will appear when a connection is established between the camera and computer. 1. Select [Canon CameraWindow] and click [OK] (first time only). If the window to the right does not appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [CameraWindow] [PowerShotIXY-IXUS-DV 6] and [CameraWindow]. 2. Download the images. • Download the images using the camera or the computer.
Downloading Images to a Computer The following window will appear when you establish a connection between the camera and computer. If it fails to appear, click the [Canon CameraWindow] icon on the Dock (the bar which appears at the bottom of the desktop). 1. Download the images. • Download the images using the camera or the computer. • By default, the downloaded images are saved into the [Pictures] folder. Downloading Images Using the Camera (p. 22). Downloading Images Using a Computer.
Downloading Images Using the Camera (Direct Transfer) Use this method to download images using camera operations. Install the supplied software and adjust the computer settings before using this method for the first time (p. 18). All Images Transfers and saves all images to the computer. New Images Transfers and saves to the computer only the images that have not been previously transferred. Transfers and saves to the computer only the DPOF Trans. Images images with DPOF Transfer Order settings.
Select & Transfer/Wallpaper 2. Select or , and press the FUNC./SET button). button (or the 3. Select images to download and press the button (or the FUNC./SET button). • The images will download. The button will blink blue while downloading is in progress. • Images can also be selected during index playback (Advanced Guide p. 73). • Press the MENU button to return to the Direct Transfer menu. Only JPEG images can be downloaded as wallpaper for a computer.
Safety Precautions Be sure to read, understand and follow the safety precautions below when using the camera, in order to prevent injury, burns or electrical shock to yourself and others. Be sure to also read the safety precautions listed in the Advanced Camera User Guide. Warnings • Do not trigger the flash in close proximity to human or animal eyes. • Store this equipment out of the reach of children and infants. • Avoid dropping or subjecting the camera to severe impacts.