ENGLISH Before Using the Camera Shooting Playback/Erasing Print/Transfer Settings Troubleshooting List of Messages Appendix Advanced Camera User Guide This guide explains camera features and procedures in detail.
Main Features Shooting z 4x optical zoom with shift-method image stabilizer z Avoid the effects of camera shake or blurry subjects when shooting by using a high ISO speed z Face Detect AF ideal for photographing images of people z Automatically adjusts shooting settings to match particular conditions z Use the separately sold wide converter, tele-converter or close-up lens when shooting Playback z Red-Eye Correction z Plays back automatically using the Auto Play function Editing z Records sound memos for s
Conventions Used in this Guide Icons appearing next to or below titles indicate the shooting modes in which the procedure can be used. Mode switch: Shooting ( )/Playback ( ) Postcard Mode Shooting Mode • Unavailable shooting modes are shown grayed out. See Functions Available in Each Shooting Mode (p. 127) at the end of this guide. z In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide.
Table of Contents Items marked with a are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . 1 Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Please Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preventing Malfunctions . . . . . . . . . . . . . . . . . . . . . . .
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock, Manual Focus, Safety MF) . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Switching between Metering Modes . . . . . . . . . . . . . . . . . . . .48 Adjusting the Exposure Compensation. . . . . . . . . . . . . . .49 Adjusting the Tone (White Balance) . . . . . . . . . . . . . . . . . . . .49 Shooting in a My Colors Mode . . . . . . . . . . . . . . . . . . . . . . . .52 Adjusting the ISO Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . .
TV monitor output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Printing with a direct print compatible printer . . . . . . . . . . . . . 92 List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Battery Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Handling the Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling Precautions Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
Warnings Equipment z Do not point the camera directly at the sun or bright light sources. Doing so could damage the camera's CCD or your eyesight. z Store this equipment out of the reach of children and infants. Accidental damage by a child could result in serious injury. • Wrist strap: Placement of the strap around the child’s neck could result in asphyxiation. • Memory card: It may be swallowed accidentally. If this occurs, contact a doctor immediately.
Battery z Do not place the batteries near a heat source or expose it to direct flame or heat. z The batteries should not be immersed in water or sea water. z Do not attempt to disassemble, alter or apply heat to the batteries. z Avoid dropping or subjecting the batteries to severe impacts that could damage the casing. z Use only recommended batteries and accessories. Failure to follow these precautions may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
Others z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. z Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera. Such items may lose data or stop working.
Equipment z When not using the camera for extended periods of time, remove the batteries from the camera or battery charger and store the equipment in a safe place. If the batteries are left inside the camera, damage caused by leakage may occur. z Do not connect compact power adapters or battery chargers to devices such as electrical transformers for foreign travel because it may lead to malfunctions, excessive heat generation, fire, electric shock or injury.
Preventing Malfunctions Avoid Strong Magnetic Fields z Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Before Using the Camera – Basic Operations Using the LCD Monitor 1 Press . z The display mode changes as follows with each press. Shooting Mode ( ) Standard (No Information) Playback Mode ( No Information Detailed (Information View) Standard Off Detailed ) z The shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode. z The LCD monitor on or off setting is retained even after the camera power is turned off.
Information Displayed on the LCD Monitor Shooting Information (Shooting Mode) Spot AE Point Frame (p. 48) Zoom Magnification (p. 29) Digital Tele-Converter (p. 29) AF Frame (p. 43) Flash (Basic Guide p. 12) Auto Rotate (p. 58) zRec Movie Recording (p. 35) Low Battery (p. 96) Shooting Mode Grid Lines (p. 21) 3:2 Guide (p. 21) ( ••• )* ISO Speed (p. 53) Image Stabilizer (p. 27) White Balance (p. 49) • Stills: Recordable Shots • Movies: Remaining Time/ Elapsed Time Drive Mode (p. 31, Basic Guide p.
If the indicator blinks orange and the camera shake warning icon displays, this indicates that a slow shutter speed may have been selected due to insufficient illumination. Use the following methods to shoot: - Set the IS mode to any setting other than [off] (p. 27) - Raise the ISO speed (p. 53) - Select a setting other than (flash off) (Basic Guide p. 12) - Attach the camera to a tripod or other device Playback Information (Playback Mode) Standard WAVE Format Sound (p.
Detailed Histogram (p. 16) Shooting Mode ( ••• ) ISO Speed (p. 53) Shutter Speed (p. 40) Recording Pixels/Frame Rate (Movies) (p. 37) ··· Exposure Compensation (p. 49) ··· Flash Exposure Compensation (p. 55) Flash Output (p. 55) White Balance (p. 49) My Colors (p. 52) AF Lock (p. 45)/Manual Focus (p. 46) Macro (Basic Guide p. 13) File size Red-Eye Correction Function (p. 69) Recording Pixels (Still Image) (p. 26) Movie Length (Movies) (p.
z Information for images shot on other cameras may not display correctly. z Overexposure Warning In the following cases, overexposed portions of the image blink. - When reviewing an image right after shooting in the LCD monitor (information view) - When using the detailed display mode of the Playback mode Histogram Function The histogram is a graph that allows you to check the brightness of the image. The greater the bias toward the left in the graph, the darker the image.
Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Playback Mode Powers down approximately 5 minutes after Connected to a Printer the last control is accessed on the camera. * This time can be changed. z The power saving function will not activate during an Auto Play or while the camera is connected to a computer.
Menus and Settings Menus are used to set the shooting, playback and print settings as well as such camera settings as the date/time and electronic beep. The following menus are available. z FUNC. Menu z Rec., Play, Print and Set up Menus FUNC. Menu Sets many of the functions commonly used during shooting. a b e c d This example shows the FUNC. menu in mode. aSet the mode switch to (shooting). bPress the FUNC./SET button. cUse the or button to select a menu item.
Rec., Play, Print and Set up Menus Convenient settings for shooting, playback or printing can be set with these menus. (Rec.) Menu (Set up) Menu a e between menus with the or button when this part is selected. c d • This example shows the Rec. menu in mode. • In playback mode, the Play, Print and Set up menus display. a Press the MENU button. b Use the or button to switch between menus. • You can also use the zoom lever to switch between menus. c Use the or button to select a menu item.
Menu List See Functions Available in Each Shooting Mode FUNC. Menu The icons shown below are the default settings. Menu Item ISO Speed White Balance Drive Mode Reference Page Reference Page Menu Item p. 53 Metering Mode p. 48 p. 49 Compression (Still image) p. 27 Frame Rate (Movie) p. 37 p. 31, Basic Guide p. 14 My Colors p. 52 p. 26 +/– (Flash)/ Flash Output Recording Pixels (Still image) p. 55 Recording Pixels (Movie) p. 37 Rec.
Menu Item Safety MF Options Reference Page On/Off* p. 47 AF-assist Beam On*/Off Review Off/2*–10 seconds/Hold p. 86 Basic Guide p. 9 Disp. Overlay p. 34 (Still image) Off*/Grid Lines/3 : 2 Guide/ Both (Movie) Off*/Grid Lines IS Mode p. 27 (Still image) Continuous*/Off Converter None*/WC-DC52/ TC-DC52A/250D p. 106 Date Stamp Off*/Date/Date & Time p. 33 Set button Play Menu ( p. 57 ) Print Menu ( Menu Item Reference Page Auto Play p. 73 Red-Eye Correction p.
Set up Menu ( ) *Default setting Menu Item Options On/Off* Set to [On] to silence all operation sounds except for the warning sounds (Basic Guide p. 8). Volume Off/1/2*/3/4/5 Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound and playback sound. The volume cannot be adjusted if [Mute] is set to [On]. Start-up Vol. Adjusts the volume of the start-up sound when the camera is turned on. Operation Vol.
Menu Item Options Reference Page Date/Time Basic Guide p. 7 Format You can also select a low level format (p. 25). File Numbering Continuous*/ Auto Reset Create Folder p. 61 p. 59 Check mark Creates a folder during the next (On)/ shooting session. No check mark (Off) Auto Create Off*/Daily/ MondaySunday/ Monthly You can also set an auto creation time. Auto Rotate On*/Off p. 58 Distance Units m/cm* / ft/in Sets the units for the MF indicator distance unit (p. 46).
Resetting Settings to Their Default Values 1 (Set up) Menu [Reset All]. See Menus and Settings (p. 19). 2 Select [OK] and press . z Settings cannot be reset when the camera is connected to a computer or to a printer. z The following cannot be reset. - Shooting mode - The [Date/Time], [Language] and [Video System] options in the (Set up) menu (p. 23) - White balance data recorded with the custom white balance function (p.
Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. 1 (Set up) Menu [Format]. See Menus and Settings (p. 19). Select [OK] and press . z To perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark.
Shooting Changing the Recording Pixels and Compression (Still Images) Shooting Mode 1 FUNC. Menu * (Compression)/ (Recording Pixels). * See Menus and Settings (p. 18). * Default setting. z Use the or button to select compression settings/recording pixels and press the FUNC./SET button.
Approximate Values for Compression Settings Compression Superfine Purpose High Quality Shoot higher quality images Fine Shoot normal quality images Normal Normal Shoot more images z See Image Data Sizes (Estimated) (p. 119). z See Memory Cards and Estimated Capacities (p. 117). Setting the Image Stabilizer Function * Shooting Mode *Only [Continuous] can be set.
The following icons appear on the LCD monitor. [Continuous] [Shoot Only] [Panning] [Converter] setting Reference in Rec. menu Page None WC-DC52/ TC-DC52A/250D p. 106 z If you select [Shoot Only] or [Panning] in shooting mode (still images) and then switch to mode, the setting will change to [Continuous]. z Camera shake may not be fully corrected when shooting with slow shutter speeds, such as with evening shots. Use of a tripod is recommended.
Using the Digital Zoom/Digital Tele-Converter * Shooting Mode * Digital tele-converter cannot be set. You can combine digital zoom with optical zoom when shooting. The available shooting characteristics and focal lengths (35mm film equivalent) are as follows: Focal Length Standard 35 – 560 mm Off 35 – 140 mm 1.5x 52.5 – 210 mm 1.9x 66.5 – 266 mm Shooting Characteristics Enables shooting at zoom factors of up to 16x with digital and optical zoom combined.
Shooting with the Digital Zoom 2 Press the zoom lever toward and shoot. z The combined digital and optical zoom setting will display in the LCD monitor. z Based on the number of recording pixels set, the Safety Zoom feature calculates the maximum zoom factor beyond which image quality will begin to deteriorate. The digital zoom pauses at this zoom factor for a moment, and appears on the LCD monitor. If you press the zoom lever toward again, you can zoom in even closer.
Continuous Shooting Shooting Mode In this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*1, you can shoot continuously (smooth continuous shooting) at a set shooting interval until the memory card is full (p. 117). *1 Recommended Memory Card: Super high-speed SDC-512MSH memory card (sold separately) to which low-level formatting (p. 25) is conducted immediately before shooting. 1 FUNC. Menu * (Drive Mode) See Menus and Settings (p. 18).
Postcard Mode Shooting Mode You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor. 1 FUNC. Menu (Postcard). *(Recording Pixels) See Menus and Settings (p. 18). * Default setting. z The recording pixels are set to (1600 x 1200) and the compression to (Fine). z The area that will not get printed grays out. The digital zoom and digital tele-converter cannot be used in this mode.
Embedding the Date in the Image Data You can embed the date in image data when selected. (Postcard) is 1 [Off]*/ (Rec.) Menu [Date Stamp] [Date]/[Date & Time]. See Menus and Settings (p. 19). * Default setting. z LCD monitor display : [Off] : [Date]/[Date & Time] Shooting z Ensure that the camera’s date/time is set beforehand (p. 23). z The date stamp cannot be deleted from the image data once it has been embedded.
Setting the Display Overlays * Shooting Mode * Only [Grid Lines] can be set. You can display vertical and horizontal grid lines, a 3:2 print area guide, or both on the LCD monitor while shooting to help check the position of your subject. Grid Lines 3:2 Guide Displays grid lines to divide the screen into 9 parts. Helps confirm the vertical and horizontal positioning of the subject. Helps confirm the print area for a 3:2 print.* Areas outside the printable area are grayed out.
Movie Shooting Shooting Mode The following movie modes are available. For information on the recording pixels and frame rate in each mode, refer to Recording Pixels and Frame Rates (p. 37). Standard You can select the recording pixels and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode (p. 29).
2 Shoot. z Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. z Pressing the shutter button fully starts recording video and sound simultaneously. z During shooting, the recording time and [zRec] appear on the LCD monitor. z Pressing the shutter button fully again stops recording. Recording will stop automatically under the following circumstances.
Changing Recording Pixels and Frame Rates (Movies) You can change the recording pixels and frame rate when the movie mode is set to (Standard). 1 FUNC. Menu * (Frame Rate)/ (Recording Pixels). * See Menus and Settings (p. 18). * Default setting. z Use the or button to select a frame rate/recording pixels and press the FUNC./ SET button. Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion.
Shooting Panoramic Images (Stitch Assist) Shooting Mode Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. The overlapping seams of several adjacent images can be joined into a single panoramic image. 1 Use the or direction. button to select a shooting z You can select from the following two shooting directions. - Left to right horizontally - Right to left horizontally 2 Shoot the first image in the sequence.
3 Compose the second image so that it overlaps a portion of the first and shoot. z You can press the or button to return to the previously recorded image to retake the shot. z Minor discrepancies in the overlapping portions can be corrected when the images are stitched together. 4 Repeat the procedure for additional images. z A sequence may contain up to 26 images. z Press the FUNC./SET button after the last shot. z Use PhotoStitch, a supplied software program, to merge the images on a computer.
Setting the Shutter Speed Shooting Mode When you set the shutter speed, the camera automatically selects an aperture value to match the brightness of the subject. Faster shutter speeds allow you to catch an instantaneous image of a moving subject, while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas. z If the aperture value is shown in red, the image is underexposed (insufficient light) or overexposed (too much light).
Shutter Speed Display z The following shutter speeds can be set. 1/160 indicates 1/160 second. Also, 0"3 indicates 0.3 second and 2" indicates 2 seconds. 15" 13" 10" 8" 6" 5" 4" 3"2 2"5 2" 1"6 1"3 1" 0"8 0"6 0"5 0"4 0"3 1/4 1/5 1/6 1/8 1/10 1/13 1/15 1/20 1/25 1/30 1/40 1/50 1/60 1/80 1/100 1/125 1/160 1/200 1/250 1/320 1/400 1/500 1/640 1/800 1/1000 1/1250 1/1600 1/2000 Setting the Aperture Shooting Mode Shooting The aperture adjusts the amount of light entering through the lens.
Manually Setting the Shutter Speed and Aperture Shooting Mode You can manually set the shutter speed and aperture to shoot images. z When you press the shutter button halfway, the difference between the standard exposure* and the selected exposure appears on the LCD monitor. If the difference is more than ±2 stops, “–2” or “+2” appears in red. * Standard exposure levels are calculated by measuring light according to the currently selected metering mode.
Selecting an AF Frame * Shooting Mode * Cannot be set in mode. The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following ways. Face Detect You can have the camera automatically detect the position of a face and use this data to set the focus and exposure* while shooting. In addition, the camera will meter the subject so that the face is correctly illuminated when the flash fires.
z The AF frame appears as follows (when the LCD monitor is on) when the shutter button is pressed halfway. • Green : Shooting preparations complete • Yellow : Focusing difficulty (when the AiAF is [Off]) • No AF frame: Focusing Difficulty (when the AiAF is [On]) z The following occurs when [Face Detect] is selected. - Maximum of three AF frames will be displayed at the position of the face the camera recognizes.
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock, Manual Focus, Safety MF) * Shooting Mode * Cannot be used in mode. It may be difficult to focus on the following types of subjects.
3 Press and hold the shutter button halfway and press the button. z The icon and the MF indicator will appear on the LCD monitor. 4 Re-aim the camera to compose the shot as desired and shoot. To Release the AF Lock Press the button. z The AF lock cannot be used in the and modes. z The AF frame will not appear in mode. z When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 43) makes shooting easier since the camera focuses using the center AF frame only.
z Depending on the shooting mode, pressing the will switch between the setting items as follows: , , , , button Exposure compensation/ , mode/Exposure compensation/ mode/ Shutter speed/Exposure compensation/ Aperture value/Exposure compensation/ Shutter speed/Aperture value/ 3 Press the or button and adjust the focus. To Cancel the Manual Focus Press the button. The manual focus cannot be used in the modes. Shooting z The MF indicator shows approximate figures.
Switching between Metering Modes Shooting Mode 1 FUNC. Menu * (Evaluative) See Menus and Settings (p. 18). * Default setting. z Use the or button to select the metering mode and press the FUNC./ SET button. Metering Methods 48 Evaluative Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering.
Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background. 1 2 Turn on the LCD monitor. Press the button. Shooting z Use the or buttons to adjust the exposure compensation and press the button.
White Balance Settings Auto Settings are automatically set by the camera. Day Light For recording outdoors on a bright day. Cloudy For recording under overcast, shady or twilight skies. Tungsten For recording under tungsten and bulb-type 3wavelength fluorescent lighting. Fluorescent For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting. For recording under daylight fluorescent, or Fluorescent H daylight fluorescent-type 3-wavelength fluorescent lighting.
1 FUNC. Menu * (Auto) (Custom). See Menus and Settings (p. 18). * Default setting. 2 Aim the camera at a piece of white paper or cloth and press . z You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). z Shoot with the same settings as when reading the white balance data.
Shooting in a My Colors Mode Shooting Mode You can change the look of an image when it is shot. My Colors Settings My Colors Off Sepia Emphasizes the contrast and color saturation to record bold colors. Tones down the contrast and color saturation to record neutral hues. Records in sepia tones. B/W Custom Color Records in black and white. Use this option to adjust contrast, sharpness and saturation before shooting. Vivid Neutral 1 Records normally with this setting. FUNC. Menu * (My Colors Off).
Setting the Camera to a Custom Color Mode 1 (Custom Color) . See Menus and Settings (p. 18). 2 z The altered color will display. 3 Select an item Adjust Shooting Use the or button to select [Contrast], [Sharpness] or [Saturation] and the or button to adjust it. . z This completes the setting. If you press the MENU button at this point, you will return to the screen where you can select a My Colors mode.
1 FUNC. Menu (Auto). See Menus and Settings (p. 18). z Use the or button to select an ISO speed and press the FUNC./SET button. z Selecting sets the optimal ISO speed according to the light level when shooting. Since the ISO speed setting will automatically be raised in dark places, the camera will select a faster shutter speed and reduce the chances of camera shake. z Selecting (High ISO Auto)* sets a higher sensitivity than for .
Switching between Flash Adjustment Settings Shooting Mode Although the built-in flash will fire with automatic flash adjustments (except in the mode), it is also possible to set it so that it fires without any adjustments. 1 (Rec.) Menu [Manual]. [Flash Adjust] [Auto]*/ See Menus and Settings (p. 19). * Default setting. Shooting Compensating the Flash Adjustment / Flash Output Shooting Mode z When the shooting mode is set to , or when [Flash Adjust] is set to [Auto] (p.
1 FUNC. Menu Output). (+/– (Flash))/ (Flash See Menus and Settings (p. 18). z Adjust the compensation/output using the or button and press the FUNC./SET button. Example: Flash Exposure Compensation Adjusting Exposure for Built-in Flash Shooting (Safety FE) Shooting Mode The camera automatically changes the shutter speed or aperture value when the flash fires to avoid overexposing and blowing out the highlights in the scene. 1 (Rec.) Menu [Safety FE] See Menus and Settings (p. 19).
Registering Settings to the Print/Share Button Shooting Mode You can register a function that you often use when shooting with the button. The following functions can be registered. Menu Item Not Assigned* Page — Menu Item Page Digital Tele-converter p. 30 ISO Speed p. 53 DISP. Overlay p. 34 White Balance p. 49 Display Off p. 22 * Default setting. (Rec.) Menu [Set button]. See Menus and Settings (p. 19).
Using the 1 Button Press the button. z Each time that the button is pressed, the settings of the registered functions are switched. z For (ISO Speed) and (White Balance), the corresponding setup screen is displayed. z When there are functions not available in the current shooting mode, pressing button will have no effect.
When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be “up” and the lower end to be “down”. It then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function. Creating an Image Destination (Folder) Shooting Mode You can create a new folder at any time and the recorded images will be automatically saved to that folder.
Creating a Folder the Next Time You Shoot. 2 Use the or button to check mark [Create New Folder] . z will be displayed on the LCD monitor when shooting. will disappear from the screen when a new folder is created. Setting the Day or Time for Automatic Folder Creation. 2 Select a day for the [Auto Create] option and a time in the [Time] option . z displays when the specified time arrives. The symbol will cease to display after the new folder is created. Up to 2000 images can be saved into one folder.
Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. 1 (Set up) Menu [File Numbering] [Continuous]*/ [Auto Reset]. See Menus and Settings (p. 19). * Default setting. File Number Reset Function Auto Reset Shooting Continuous A number one higher than the last one recorded is assigned to the next image.
File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder.
Playback/Erasing Please also see the Basic Camera User Guide (p. 16). Magnifying Images 1 Press the zoom lever toward . will display and a magnified portion of the image will display. z Images can be magnified up to a factor of approximately 10x. z Approximate Location of the Displayed Area Use the , , or around the image. button to move z If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and will display.
Viewing Images in Sets of Nine (Index Playback) 1 Press the zoom lever toward z Up to nine images can be viewed at once in index playback. z Use the , , or button to change the image selection. . Selected Image Movie Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward while in index playback and you can switch the display between sets of nine images. z Use the or button to move to the previous or next set of 9 images. z Hold the FUNC.
Jumping to Images When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search. 1 Jump 10 Images Jumps over 10 images at a time. Jump 100 Images Jumps over 100 images at a time. Jump Shot Date Jumps to the first image of each shooting date. Jump to Movie Jumps to a movie. Jump to Folder Jumps to the first image of each folder. In single image playback mode, press the button.
Viewing Movies Movies cannot be played in the index playback mode. 1 Display a movie and press . z Images with a movies. icon are Movie Control Panel Playback Progress Bar Time movie was shot Volume Level (Adjust it with the or button) 2 Select (Play) and press . z The movie will pause if you press the FUNC./SET button during playback. It will resume when you press the button again. z When playback ends, the movie stops at the last frame displayed. Press the FUNC.
Operating the Movie Control Panel Ends playback and returns to single image playback Prints (An icon will display when a printer is connected. See the Direct Print User Guide for details.) Play Slow Motion Playback (You can use the button to slow down or the button to speed up playback.) Displays the first frame Previous Frame (Rewinds if the FUNC./SET button is held down.) Next Frame (Fast Forwards if the FUNC./SET button is held down.
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. Original 1 90° (Play) Menu 270° . See Menus and Settings (p. 19). 2 Use the or button to select an image to rotate and press to rotate it. z Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. z This also can be set in the index playback mode.
Red-Eye Correction Function You can correct red eyes in recorded images. However, red eyes may not be automatically detected in some images or the results may not turn out as you intended. Examples: - Faces near the screen edges or faces that appear extremely small, large, dark or bright in relation to the overall image. - Faces turned to the side or at a diagonal, or faces with a portion hidden. 1 (Play) Menu . See Menus and Settings (p. 19).
4 Select [New File] or [Overwrite] and press . z [New File]: Saved as new file with a new name. The uncorrected image is stored. The new image is stored as the last file. z [Overwrite]: Saved with the same file name as the uncorrected image. The uncorrected image is erased. z When [New File] is selected, proceed to the procedure 5. 5 Press and select [Yes] or [No], then press . z Selecting [Yes] displays the corrected image, while [No] returns you to the Play menu.
Add Corrected Frame A maximum of 35 corrected frames may be added. 1 Select [Add Frame] with and press . or 2 Match the position using button and press . , button , or z Size of the frame can be changed with the zoom lever. Playback/Erasing Attaching Sound Memos to Images In playback mode (including single image playback and index playback), you can attach sound memos (up to 1 min.) to an image. The sound data is saved in the WAVE format. 1 (Play) Menu . See Menus and Settings (p. 19).
2 Use the or button to select an image to which to attach a sound memo and press . z The sound memo control panel will display. 3 Select (Record) and press z The elapsed time and the remaining time display. z Pressing the FUNC./SET button pauses the recording. Pressing it again resumes recording. z Up to 1 minute of recordings can be added to any one image. .
Automated Playback (Auto Play) Use this feature to automatically play back all of the images in the memory card. The LCD monitor displays each image for approximately 3 seconds. 1 (Play) Menu . See Menus and Settings (p. 19). z During automated playback, the following functions are possible: - Pausing/resuming the Auto Play: Press the FUNC.
Protecting Images You can protect important images and movies from accidental erasure. 1 (Play) Menu . See Menus and Settings (p. 19). 2 Use the or button to select an image to protect and press . z Pressing the FUNC./SET button again cancels the setting. z You can also protect images in the index playback mode.
Viewing Images on a TV set You can play back images on a television with the supplied AV cable. 1 2 Turn off the camera and the TV. Connect the AV cable to the camera’s A/V OUT terminal. z Open the terminal cover by slipping a fingernail under the right edge and plug the AV cable in all the way. Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. VIDEO AUDIO Yellow Black 4 5 Playback/Erasing 3 Turn on the TV and switch it to video mode. Turn on the camera.
Erasing All Images z Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. z Protected images cannot be erased with this function. 1 (Play) Menu . See Menus and Settings (p. 19). 2 Select [OK] and press . z To exit instead of erasing, select [Cancel]. Please format the memory card when you want to erase not only image data but also all the data contained on the memory card (p. 25).
Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF.
2 Use the printing. or button to select images for z Selection methods differ for the Print Type settings (p. 79). (Standard)/ (Both) Select an image, press the FUNC./ SET button and use the or button to select the number of print copies (up to 99). - (Index) Select an image and press the FUNC./SET button to select or deselect it. Number of Print Copies Index Print Selection z You can also select images in the index playback mode.
z The output of some printers or photo developing services may not reflect the specified print settings. z Print settings cannot be set for movies. z Images are printed in order according to the file number. z A maximum of 998 images can be selected. z When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). Setting the Print Style After setting the print style, select the images for printing.
z The Date and File No. settings change according to the Print Type as follows. - Index [Date] and [File No.] cannot be set to [On] at the same time. - Standard or Both [Date] and [File No.] can be set to [On] at the same time, however, the printable information may vary between printers. z Images dated using (Postcard Date Imprint mode) (p. 33) are always printed with the date, regardless of the [Date] setting.
Single Images 2 Select [Order] and press . z Selecting [Reset] cancels all transfer order settings. 3 Use the or button to select an image to transfer and press . Transfer Selection z Pressing the FUNC./SET button again deselects the setting. z You can also select images in the index playback mode. All the Images on a Memory Card Select [Mark all] and press . z Selecting [Reset] cancels all transfer order settings. 3 Select [OK] and press .
Troubleshooting Camera Camera will not operate. Power is not turned on. z Press the power button (Basic Guide p. 8). Memory card slot/battery cover is open. z Confirm that the memory card slot /battery cover is securely closed (Basic Guide p. 5). Batteries are loaded in the wrong direction. z Reload the batteries in the correct direction (Basic Guide p. 5). Batteries are not the right type. z Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries (p. 96).
The Date/Time menu appears. The lithium date/time battery z Replace the lithium date/time charge is depleted. battery (p. 109). LCD monitor Not displayed. LCD monitor is set to Off. z Press DISP. button and turn on the LCD monitor (p. 12). The display darkens. The image in the LCD z This is a normal occurrence in monitor will darken in strong devices containing CCDs and sunlight or bright light. does not constitute a malfunction.
appears. A slow shutter speed has likely been selected because of insufficient lighting. z Set the IS Mode to any setting other than [Off] (p. 27). z Raise the ISO speed (p. 53). z Select a setting other than (flash off) (Basic Guide p. 12). z Set the self-timer and attach the camera to a tripod or other device (Basic Guide p. 14). appears. This displays when using a z These settings will be overwritten by those set by your camera memory card that has print (p. 77).
Shooting Camera will not record. z Set the mode switch to (shooting) (Basic Guide p. 8). Flash is charging. z When the flash is charged, the indicator will light orange. Shooting is now possible (Basic Guide p. 4). Memory card is full. z Insert a new memory card (Basic Guide p. 5). z If required, download the images to a computer and erase them from the memory card to make space. Memory card is not formatted correctly. z Format the memory card (p. 25).
Image is blurred or out of focus. The camera moves when the shutter button is pressed. z Confirm the procedures in “ appears” (p. 84). AF-assist Beam is set to [Off]. z In dark places where it is difficult for the camera to focus, the AFassist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 21). Take care not to obstruct the AFassist Beam with your hand when used. Subject is out of focal range.
The subject is overexposed z Set the exposure compensation to because the surroundings a negative (–) setting (p. 49). are too dark. z Use the spot metering functions (p. 48). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on. z Set the flash to (Flash off) (Basic Guide p. 12). Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise.
Eyes appear red. Light is reflected back from z Turn [On] the Red-Eye setting in the eyes when the flash is the Rec. menu (p. 28). For this used in dark areas. mode to be effective, the subject must be looking right at the redeye reduction lamp. Try asking them to look directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject.
Shooting movies The recording time may not display properly or shooting may stop unexpectedly. The following types of memory cards are used. - Slow recording cards. - Cards formatted on a different camera or a computer. - Cards which have had images recorded and erased repeatedly. z Although the recording time may not display properly during shooting, the movie will be recorded correctly on the memory card.
Playback Cannot play back. You attempted to play back z Computer images that cannot be played back may play back if they images shot with another are added to the camera using the camera or images edited supplied software program with a computer. ZoomBrowser EX or ImageBrowser. File name was changed with z Set the file name or location on the a computer or file location file format/structure of the camera. was changed. (Refer to the Software Starter Guide for details). Movies do not play back correctly.
Battery Batteries consumed quickly. Batteries are not the right type. z Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries (p. 96). Battery capacity drops due z If shooting in a cold location, warm to low ambient the batteries such as by placing temperatures. them in your pocket before using them. Battery terminals are dirty. z Wipe the terminals well with a dry cloth before use. z Reload the batteries several times.
Printing with a direct print compatible printer Cannot print The camera and printer are z Securely connect the camera and not properly connected. printer with the specified cable. The printer power is not turned on. z Turn on the printer power. The print connection method z In the (Set up) menu, select is not correct. [Print Method] and select [Auto] (p. 23).
List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... Image is being recorded to the memory card, or the playback mode is starting up. No memory card You turned on the camera without a memory card installed, or with a memory card installed in the wrong orientation (Basic Guide p. 5). Card locked! The SD memory card or SDHC memory card is write-protected.
Change the batteries Battery charge is insufficient to operate the camera. Replace both batteries immediately with unused AA-size alkaline batteries or fully charged Canon AA-size NiMH batteries. No image. No images recorded on memory card. Image too large. You attempted to play back an image larger than 4992 x 3328 pixels or with a large data size. Incompatible JPEG You attempted to play back an incompatible JPEG image (edited with a computer, etc.). RAW You attempted to play back a RAW image.
Cannot Modify Cannot apply red-eye correction as no red-eye is detected. Cannot transfer! When transferring images to your computer using the Direct Transfer menu, you attempted to select an image with corrupted data or an image taken with another camera. You may have also attempted to select a movie when [Wallpaper] was selected in the Direct Transfer menu. Protected! You attempted to erase or edit a protected image, movie or sound memo. Too many marks.
Appendix Battery Handling Battery Charge The following icon and message will display. Battery charge is low. If using the camera for an extended period, replace the batteries as soon as possible. Change the batteries Batteries are fully depleted and the camera can no longer operate. Replace the batteries immediately. Battery Handling Precautions z This camera uses AA-size alkaline batteries or Canon AAsize NiMH batteries (sold separately).
z Before installing the batteries, wipe the battery terminals well with a dry cloth. If the battery terminals are soiled with oil from one’s skin or other dirt, the number of recordable images may be considerably diminished, or the amount of time the camera can be used may be reduced. z At low temperatures, battery performance may be reduced and the low battery icon ( ) may appear earlier than usual. Under these conditions, restore the battery performance by warming it in a pocket immediately before use.
Handling the Memory Card SD memory card or SDHC memory card Write Protect Tab Write Protect Tab Slide the switch up. Writing/Erasing Possible Slide the switch down (you can protect the images and other data on the card) Writing/Erasing Impossible Cautions When Handling z Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. z Do not attempt to disassemble or alter the memory card.
Formatting Appendix z Please note that formatting (initializing) an memory card erases all data, including protected images. z You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem.
Using the Power Kits (Sold Separately) Using Rechargeable Batteries (Battery and Charger Kit CBK4-300) This kit includes a battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge batteries as shown below. Recharging is also possible using two batteries.
Appendix z Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one’s skin or other dirt: - If the battery usage time has considerably diminished - If the number of recordable images has considerably diminished - When charging the batteries (insert and remove the batteries two or three times before charging) - When charging completes in a space of a few minutes (the battery charger indicator remains lit) z You may not be able to fully ch
z It takes approximately 4 hours 40 minutes for the charger to fully recharge the batteries after they have been depleted. When two batteries are placed on each side of the charger, recharging will take approximately two hours (as determined by testing at Canon facilities). Charge batteries in an environment where the temperature is in the range of 0 to 35°C (32 to 95°F). z The charging time varies according to the ambient temperature and to the battery charge state.
Using the Lenses (Sold Separately) The camera supports use of the separately sold Wide Converter WC-DC52, Tele-converter TC-DC52A and Close-up lens 250D (52mm). In order to attach these lenses, you also need to use the separately sold Conversion Lens Adapter LA-DC52G. z When attaching the wide converter, tele-converter or close-up lens be sure to screw it on securely. If they come loose, they may fall from the lens adapter, posing risk of injury from shattered glass.
Close-up lens 250D (52 mm) This lens makes taking macro shots easy. In the normal mode, close-up shots can be taken when the distance from the front of the lens to the subject is 17 to 25 cm (6.7 to 9.8 in.) at maximum telephoto. Shooting area (during macro mode) Telephoto end Distance from the front of the lens to the subject Shooting area 17 cm (6.7 in.) 46 x 35 mm (1.8 x 1.4 in.
4 Align the z mark on the conversion lens adapter with the mark on the camera, and turn the adapter in the direction of the arrows as far as the mark on the camera. z To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring release button. 5 Set the lens on the adapter, and turn it in the indicated direction to attach it securely. Appendix z Completely remove all dust and dirt from conversion lenses with a lens blower brush before use.
Converter Settings Settings for when shooting using [IS Mode] (p. 27) with the separately sold Wide Converter WC-DC52, Tele-converter TCDC52A or Close-up lens 250D attached. 1 (Rec.) Menu [Converter] [Off]*/ [WC-DC52]/[TC-DC52A]/[250D]. See Menus and Settings (p. 19) * Default setting. z Select the attached converter. When you remove the converter from the camera, return the converter setting to [Off].
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera’s built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation.
z Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both. z Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. z To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera’s front panel. z A tripod can be used even when the flash is attached.
Replacing the Date Battery If the Date/Time menu appears when the camera power is turned on, the date battery charge is low and the date and time settings have been lost. Please purchase a lithium coin battery (CR1220) and replace it as follows. Please note that the first date battery may appear to expire relatively quickly after you purchase the camera. This is because it is installed in the camera at the point of manufacture, not when you make the purchase.
5 Remove the battery by pulling it up in the direction indicated by the arrow. (–) Side 6 Insert a new battery with the (–) side facing up. 7 Replace the battery holder and close the memory card slot/battery cover. 8 When the Date/Time menu appears, set the date and time (Basic Guide p. 7). After purchasing the camera and turning on the power for the first time, although the Date/Time menu will appear, you do not need to replace the date battery.
Camera Care and Maintenance Never use thinners, benzine, detergents or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Never use organic solvents on the camera body or lens.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot A570 IS (W): Max. wide angle (T): Max. telephoto Camera Effective Pixels : Approx. 7.1 million 112 Image Sensor : 1/2.5-inch type CCD (Total number of pixels: Approx. 7.4 million) Lens : 5.8 (W) – 23.2 (T) mm (35mm film equivalent: 35 (W) – 140 (T) mm) f/2.8 (W) – f/5.5 (T) Digital Zoom : Approx. 4.0x (Up to approx.
Metering System : Evaluative*1, Center-weighted average or Spot*2 *1 When AiAF is set to [Face Detect], the brightness of the face is also evaluated *2 Fixed to center Exposure Compensation : ±2 stops in 1/3-stop increments ISO speed (Standard Output Sensitivity, Recommended Exposure Index) : Auto*, High ISO Auto*, ISO 80/100/200/400/ 800/1600 White Balance : Auto, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H, Underwater or Custom Built-in Flash : Auto*, on*, off * Camera automatically
File Format : Design rule for camera file system and DPOF compliant Data Type (Still images) : Exif 2.2 (JPEG)* Sound memos: WAVE (monaural) (Movies) : AVI (Image data: Motion JPEG; Audio data: WAVE (monaural)) * This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers.
Playback Modes : Single (histogram displayable), Index (9 thumbnail images), Magnified (approx. 10x (max.) in LCD monitor, advance or reverse through magnified images possible), Jump (it is possible to jump to every tenth or hundredth image, to the first image of each shooting date, to movies or to the first image in each folder. In index playback mode, it displays 9 images at once.), Auto Play, Sound memos (up to 1 min.) or Movie (slow motion play back possible).
Battery Capacity Number of Images Shot LCD Monitor On (Based on the CIPA standard) LCD Monitor Off AA-size Alkaline Batteries (included with the camera) Approx. 120 images Approx. 400 images Approx. 9 hours AA-size NiMH Batteries (NB-3AH (fully charged)) Approx. 400 images Approx. 900 images Approx. 11 hours Playback Time z The actual figures will vary according to the shooting conditions and settings. z Movie data is excluded.
Memory Cards and Estimated Capacities : Card included with the camera Recording Pixels (Large) 3072 x 2304 pixels (Medium 1) 2592 x 1944 pixels (Medium 2) 2048 x 1536 pixels (Medium 3) 1600 x 1200 pixels (Small) 640 x 480 pixels (Postcard) 1600 x 1200 pixels • 16MB SDC-128M SDC512MSH 4 40 156 7 64 251 16 134 520 5 49 190 10 87 339 21 173 671 9 76 295 16 136 529 33 269 1041 14 121 471 26 217 839 50 411 1590 56 460 1777 88 711 2747 138 1118 4317 26 217 8
Movie :Card included with the camera Recording Frame Pixels Rate 640 x 480 pixels 16MB SDC128M SDC512MSH 7 sec. 1 min. 4 sec. 4 min. 9 sec. 15 sec. 2 min. 7 sec. 8 min. 14 sec. 22 sec. 3 min. 1 sec. 11 min. 42 sec. 43 sec. 5 min. 55 sec. 22 min. 53 sec. 11 sec. 1 min. 32 sec. 5 min. 59 sec. 1 min. 47 sec. 14 min. 29 sec. 55 min. 57 sec. Standard 320 x 240 pixels Fast Frame 320 x 240 Rate pixels Compact 160x 120 pixels • Maximum movie clip length at : 1 min., at : 3 min.
Image Data Sizes (Estimated) Compression Recording Pixels 3072 x 2304 pixels 3045 KB 1897 KB 902 KB 2592 x 1944 pixels 2503 KB 1395 KB 695 KB 2048 x 1536 pixels 1602 KB 893 KB 445 KB 1600 x 1200 pixels 1002 KB 558 KB 278 KB 640 x 480 pixels 249 KB 150 KB 1600 x 1200 pixels — 3072 x 1728 pixels 2304 KB 1420 KB Recording Pixels Frame Rate 640 x 480 pixels Standard 320 x 240 pixels 558 KB 84 KB — 678 KB File size 1920 KB/sec. 960 KB/sec. 660 KB/sec. 330 KB/sec.
MultiMediaCard Interface Compatible with MultiMediaCard standards Dimensions 32.0 x 24.0 x 1.4 mm (1.3 x 0.9 x 0.06 in.) Weight Approx. 1.5 g (0.05 oz.) SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.3 x 0.9 x 0.1 in.) Weight Approx. 2 g (0.07 oz.) NiMH Battery NB-3AH (Supplied with the separately sold NiMH Battery NB4-300 set or the Battery and Charger Kit CBK4-300) Type 120 AA-size nickel metal hydride battery Nominal Voltage 1.
Battery Charger CB-5AH/CB-5AHE (Supplied with the separately sold Battery and Charger Kit CBK4-300) Rated Input 100 – 240 V AC (50/60 Hz) Rated Output 565 mA*1, 1275 mA*2 Charging Time Approx. 4 hours 40 min.*1, Approx. 2 hours*2 Operating Temperatures 0 – 35 °C (32 – 95 °F) Dimensions 65.0 x 105.0 x 27.5 mm (2.56 x 4.13 x 1.08 in.) Weight (body only) Approx. 95 g (3.35 oz.
Tele-converter TC-DC52A (Sold Separately) Magnification Approx. 1.75x Focal Length*4 245 mm (35mm film equivalent) Focusing Range*4 Approx. 1.4 m (4.6 ft.) – infinity (T)*2 Thread Diameter 52 mm standard filter thread*3 Dimensions Diameter: 55.2 mm (2.17 in.) Length: 46.7 mm (1.84 in.) Weight Approx. 86 g (3.03 oz.) Close-up Lens 250D 52 mm (Sold Separately) Focusing Range (from front of lens) Normal: 17 – 25 cm (6.7 – 9.8 in.) (W/T) Macro: 4 – 17 cm (1.6 – 6.7 in.
Index Numerics 3:2 Guide................................. 34 A AC Adapter Kit ACK800 ......... 102 AF Frame .......................... 13, 43 AF Lock ................................... 45 AF-assist Beam ................. 21, 86 Aperture Value............. 40, 41, 42 Auto Play ................................. 73 Auto Rotate Function ............... 58 AV Cable ................................. 75 B Battery Battery Capacity ................ 116 Charging............................ 100 Handling ...........
J Jump (Image Search) ............... 65 L Landscape ..................... Basic 10 Language......................... Basic 7 LCD Monitor Night Display........................ 12 Playback Information ............ 14 Shooting Information ............ 13 Using the LCD Monitor ......... 12 Lens Conversion Lens Adapter ... 104 Tele-converter.................... 103 Wide Converter .................. 103 M Macro ............................ Basic 13 Magnifying ............................... 63 Maintenance ....
Shooting Mode Auto .......................... Basic 10 Creative Zone ............ Basic 11 Av ................................... 41 M .................................... 42 P ..................................... 39 Tv ................................... 40 Functions Available............ 127 Image Zone ............... Basic 10 Shutter Button.................. Basic 3 Fully ............................ Basic 9 Halfway ....................... Basic 8 Shutter Speed..............
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
Functions Available in Each Shooting Mode Set each function according to the shooting conditions and then shoot. Function z { { { { { { z { { { { { { z { { { { { { z { { { { { { z { { { { { { z { { { { { { z { { { { { { S U U U U – – – – – – – – – z { { { { { { z { { { { { { z { { { { { { z { { { { { { Recording Pixels (Movie) (p. 37) – – – – – – – – {1) – – – – Super Fine Compression Fine (p.
Function Safety FE (p. 56) Safety MF (p. 47) Metering System (p. 48) Evaluative Center Weighted Spot White Balance8) (p. 49) My Colors (p. 52) ISO Speed (p. 53) Auto Rotate (p. 58) Disp. Overlay (p. 34) IS Mode (p. 27) Set Button (p.
CEL-SG6GA210 © 2007 CANON INC.