ENGLISH Camera User Guide Getting Started p. 9 Ensure that you read the Safety Precautions (pp. 158 – 165).
Confirming the Package Contents The following items are included in the package. If something is missing please contact the retail outlet at which you purchased the product.
Let’s Get Started! 1 Let’s Get Started! This guide is divided into the following two sections. First... Getting Started p. 9 This section explains how to prepare the camera for use and the basics of shooting, viewing and printing images. Start out by familiarizing yourself with the camera and mastering the basics. Next... Learning More p. 39 Once you have mastered the basics, use the camera’s many features to shoot more challenging photos.
2 Table of Contents Table of Contents Items marked with a or procedures. are lists or charts that summarize camera functions Please Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mode) . . . . . . . . . . . . . . . . . . Shooting Still Images ( Viewing Still Images . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 3 Changing the Compression (Still Images) . . . . . . . . . . . . . 64 Adjusting the ISO Speed . . . . . . . . . . . . . . . . . . . . . . . 65 Shooting Using the Mode Dial Mode Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shooting Modes for Specific Scenes . . . . . . . . . . . . . . . . . Shooting in the Manual Mode . . . . . . . . . . . . . . . . . . . . . . Movie Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Table of Contents Automated Playback (Slide Shows). . . . . . . . . . . . . . . . . Red-Eye Correction Function. . . . . . . . . . . . . . . . . . . . . . Resizing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching Sound Memos to Images . . . . . . . . . . . . . . . . . Protecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Erasing All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 5 About this Guide Symbol Conventions in this Guide 59 Using the Flash Available Shooting Modes 1 Press the button. p. 189 Mode switch position: Shooting ( )/ Playback ( ) Some functions may not be available in certain shooting modes. If there is no notation to that effect, the function may be used in all modes. : This mark denotes issues that may affect the camera’s operation. : This mark denotes additional topics that complement the basic operating procedures.
6 Please Read Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Please Read Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
8
9 Getting Started zPreparations zShooting Still Images zViewing Still Images zErasing zPrinting zEmbedding the Date in the Image Data zShooting Movies zViewing Movies zDownloading Images to a Computer zSystem Map
Getting Started 10 Preparations Preparations Installing the Batteries and Memory Card 1. Slide and hold the battery cover lock (a), then slide (b) and open (c) the cover. Battery Cover Lock a Open the cover (c). b c Slide the cover (b). 2. Install two batteries. Positive end (+) Negative end (–) Insert the two supplied AA-size alkaline batteries.
Preparations 11 Getting Started 3. Insert the memory card until it clicks into place. Write Protect Tab (Only SD and SDHC memory cards) Front • Confirm that the write protect tab is unlocked (only SD and SDHC memory cards). • Check the card for the correct orientation. 4. Close the cover (d), and press downward as you slide it until it clicks into place (e). d e Ensure that the memory card is correctly oriented before inserting it in the camera.
Getting Started 12 Preparations To Remove the Batteries Open the cover and remove the batteries. Take care that you do not drop the batteries. To Remove the Memory Card Use a finger to push the memory card in until you hear a click, then release it. Use the wrist strap to avoid dropping the camera during use.
Preparations The Date/Time settings menu will appear the first time the power is turned on. ON/OFF button Button Button Buttons 1. Press the ON/OFF button. 2. Select the month, day, year and time, and the display order. 1. Use the or an option. 2. Use the value. or 3. Press the button to select button to set the button. To Change a Previously Set Date/Time Use the following procedures to display the Date/Time settings window, and then perform Steps 2 and 3 above. 1. Press the 2.
Getting Started 14 Preparations The date/time setting screen will appear when the capacity of the lithium date/time battery is depleted (p. 173). Setting the Display Language You can change the language displayed in the LCD monitor menus and messages. Mode Switch Button Button Buttons 1. Set the mode switch to 2. Hold down the 3. Use the 4. Press the , , (playback). button and press the or button. button. button to select a language.
Shooting Still Images Mode) ON/OFF button Shutter Button Mode Switch Indicators Mode Dial Button 1. Press the ON/OFF button. • The start-up sound will play and the start-up image will display in the LCD monitor. • Pressing the ON/OFF button again turns the power off. 2. Select a shooting mode. 1. Set the mode switch to (shooting). 2. Set the mode dial to . 3. Aim the camera at the subject. Avoiding Camera Shake Keep your arms tight against your body while holding the camera firmly by the sides.
Getting Started 16 Shooting Still Images 5. Press the shutter button fully (all the way) to shoot. • The shutter sound will play once and the image will record. • Recorded images are displayed on the LCD monitor for approximately 2 seconds immediately after shooting (Rec. Review). You can shoot by pressing the shutter button even when an image is being displayed. • If you hold the shutter button down after a shot, the image will continue to display.
Shooting Still Images 17 1. Set the mode dial to (Easy mode). 2. Aim the camera at the subject. 3. Press the shutter button halfway to focus. 4. Press the shutter button fully to shoot. No settings, other than flash settings, can be made in Easy mode. Even if you press the MENU or FUNC./SET button, no menu will display. Getting Started Shooting in Easy Mode This camera features a shooting mode, Easy mode, that automatically selects all camera settings except the flash.
Getting Started 18 Viewing Still Images Viewing Still Images ON/OFF button Mode Switch Buttons 1. Press the ON/OFF button. 2. Set the mode switch to 3. Use the or (playback). button to display the image you wish to view. • Use the button to move to the previous image and the button to move to the next image. • The images advance more quickly if you keep the button pressed, but they will appear coarse.
Erasing 19 Mode Switch Button Buttons Button 1. Set the mode switch to 2. Use the press the or (playback). button to select an image to erase and button. 3. Confirm that [Erase] is selected and press the button. To exit instead of erasing, select [Cancel]. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image.
Getting Started 20 Printing Printing Terminal Cover Mode Switch Button DIGITAL Terminal Buttons 1. Connect the camera to a direct print compatible printer. • Open the terminal cover and plug the interface cable in all the way. • See the printer’s user guide for connection instructions. • Since this camera uses a standard protocol (PictBridge), you can use it with other PictBridge-compliant printers in addition to Canon-brand printers. For details, see the Direct Print User Guide. 2.
Printing 21 You can add images directly to a print list by merely pressing the button immediately after shooting or playing back an image. You can then print the images from the print list easily, when connecting the camera to a printer. Add to the Print List 1. Press the button (still images only). 2. Add to the print list. 1. Use the or button to select the number of print copies. 2. Use the [Add]. or 3. Press the button to select button.
Getting Started 22 Embedding the Date in the Image Data Embedding the Date in the Image Data This section explains how to embed date information on images as they are recorded (Date Stamp). • The date stamp cannot be deleted from the image data once it has been embedded. Ensure that the camera’s date/time is set correctly beforehand (p. 13). • The image size is fixed to the 2M (1600 × 1200) setting and the compression to Fine (appropriate for printing L-size or postcard-size prints.
Embedding the Date in the Image Data (Date Stamp). 1. Press the 2. Use the . button. or 3. Use the or select . button to select button to • The area that will not print displays in gray. • Press the button to switch to [Date & Time] with the or button. You can use the following methods to imprint the date on images lacking imprinted date stamps. • Set with the camera’s Digital Print Order Format (DPOF) function. Set [Date] option to [On] in [Print Settings] in the (Print) menu.
Getting Started 24 Shooting Movies Shooting Movies ( Standard Mode) ON/OFF button Shutter Button Mode Switch Mode Dial Indicators Buttons 1. Press the ON/OFF button. 2. Select a shooting mode. 1. Set the mode switch to (shooting). 2. Set the mode dial to 3. Press the 4. Use the or (Standard). 5. Press the (Movie). button. button to select button. 3. Aim the camera at the subject. z Do not touch the microphone while recording. z Do not press any buttons other than the shutter button.
Shooting Movies 25 to focus. • When the camera focuses, it beeps twice and the indicator lights green. • The exposure, focus and white balance are automatically set. Shooting Preparations Complete: Lights green 5. Press the shutter button fully to shoot. • Recording starts. • During the recording, the elapsed recording time and [zRec.] will display in the LCD monitor. Elapsed Time 6. Press the shutter button fully again to stop recording.
Getting Started 26 Viewing Movies Viewing Movies ON/OFF button Mode Switch Button Buttons 1. Press the ON/OFF button. 2. Set the mode switch to 3. Use the the or button to display a movie and press button. • Images with a 4. Use the (playback). or button. icon are movies. button to select • The movie will start playing. • If you press the FUNC./SET button during playback, you can pause and restart the movie. • You can adjust the playback volume with the or button.
Downloading Images to a Computer 27 We recommend to use the supplied software. Items to Prepare • Camera and computer • Canon Digital Camera Solution Disk supplied with the camera • Interface cable supplied with the camera System Requirements Please install the software on a computer meeting the following minimum requirements.
Getting Started 28 Downloading Images to a Computer Preparing to Download Images With Windows 2000, ensure that you install the software first before connecting the camera to the computer. 1. Installing the software. Windows 1. Place the Canon Digital Camera Solution Disk in the computer’s CD-ROM drive. 2. Click [Easy Installation]. Follow the onscreen messages to proceed with the installation. 3. Click [Restart] or [Finish] once the installation is complete.
Downloading Images to a Computer 29 1. Connect the supplied interface cable to the computer’s USB port and to the camera’s DIGITAL terminal. Open the camera’s terminal cover and insert the interface cable all the way into the connector. USB Port DIGITAL Terminal Interface Cable 3. Preparing to download images to the computer. 1. Set the mode switch to (playback) to turn the camera on. If the Digital Signature Not Found window appears, click [Yes].
Getting Started 30 Downloading Images to a Computer 4. Open the CameraWindow. Windows Select [Canon CameraWindow] and click [OK]. If the window above does not appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [CameraWindow], [CameraWindow] and [CameraWindow]. CameraWindow appears. Macintosh The CameraWindow will appear when you establish a connection between the camera and computer.
Downloading Images to a Computer 31 Use this method to download images using camera operations (except Windows 2000). Install the software before downloading images via the direct transfer method for the first time (p. 28). Button Button Buttons Button 1. Confirm that the Direct Transfer menu is displayed on the camera’s LCD monitor. • The button will light blue. • Press the MENU button if the Direct Transfer menu fails to appear. 2. Press the Direct Transfer Menu button.
Getting Started 32 Downloading Images to a Computer You can also use the following options in the Direct Transfer menu to set the method for downloading images. All Images Transfers and saves all images to the computer. New Images Transfers and saves to the computer only the images that have not been previously transferred. DPOF Trans. Images Transfers and saves to the computer only the images with DPOF Transfer Order settings.
Downloading Images to a Computer or and press the button to select images to download button. • The images will download. The button will blink blue while downloading is in progress. 3. Press the button after downloading finishes. • You will return to the Direct Transfer menu. Only JPEG images can be downloaded as wallpaper for a computer. The option selected with the button is retained even when the camera’s power is turned off.
Getting Started 34 System Map System Map Supplied with Camera Interface Cable IFC-400PCU*1 Wrist Strap WS-800 Memory Card (32 MB) AA-size Alkaline Batteries (×2) Battery and Charger Kit CBK4-300*4 Canon Digital Camera Solution Disk AV Cable AVC-DC300*1 AC Adapter Kit ACK800 Battery Charger CB-5AH/CB5AHE AA-size NiMH batteries NB-3AH (×4) • NiMH Battery NB4-300 (set of 4 AA-size) also available separately. • Two batteries are used for this camera.
System Map 35 Getting Started High-Power Flash HF-DC1 Canon brand Direct Print Compatible Printers Direct Interface Cable*2 Compact Photo Printers*2*3 (SELPHY series) PCMCIA Adapter USB Card (PC Card Adapter) Reader Inkjet Printers*6 SD Memory Card*5 • SDC-128M • SDC-512MSH USB Port Video IN Terminal Audio IN Terminal PC Card Slot TV/Video Windows/Macintosh *1 Also available for purchase separately. *2 See the user guide supplied with the printer for more information on the printer.
Getting Started 36 System Map Optional Accessories The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Flash • High-Power Flash HF-DC1 This attachable supplementary flash can be used to capture photographic subjects that are too distant for the built-in flash to illuminate. Power Supplies • AC Adapter Kit ACK800 This kit lets you power the camera from any standard household power outlet.
System Map 37 • SD Memory Card SD memory cards are used to store images recorded by the camera. Canon brand cards are available in 128 MB and 512 MB capacities. • Interface Cable IFC-400PCU Use this cable to connect the camera to a computer, Compact Photo Printer (SELPHY series), or to a inkjet printer (refer to your inkjet printer user guide). • AV Cable AVC-DC300 Use this cable to connect the camera to a TV set. Use of genuine Canon accessories is recommended.
Getting Started 38 System Map Direct Print Compatible Printers Canon offers the following separately sold printers for use with the camera. You can produce photo quality prints quickly and easily by connecting them to the camera with a single cable and operating the camera’s controls. • Compact Photo Printers (SELPHY series) • Inkjet Printers For more information, visit your nearest Canon retailer.
39 Learning More
40 Components Guide Front View a Microphone (pp. 24, 122) b AF-assist Beam (p. 49) c Red-Eye Reduction Lamp (p. 76) d Self-Timer Lamp (p. 61) e Viewfinder Window (p. 41) f Flash (p. 59) g Terminal Cover h Lens i A/V OUT (Audio/Video output) Terminal (p. 141) j DIGITAL Terminal (p. 29) k DC IN (Power Input) Terminal (p.
41 Back View Components Guide a LCD Monitor (p. 53) b Viewfinder c Speaker d Wrist Strap Mount (p. 12) e Memory Card Slot / Battery Cover Lock (p. 10) f Memory Card Slot / Battery Cover (p. 10) g Tripod Socket Using the Viewfinder The viewfinder can be used to conserve power by turning the LCD monitor off (p. 53) while shooting. The LCD monitor may be covered with a thin plastic film for protection against scratches during shipment. If so, remove the film before using the camera.
42 Controls a Indicators (p. 43) b ON/OFF button (p. 15) c Mode Dial (pp. 15, 66) d Zoom Lever (pp. 55, 103) e f g h i j k l m n Shooting: (Wide Angle)/ (Telephoto) Playback: (Index)/ (Magnify) Shutter Button (p. 15) Mode Switch (p. 18) (Print/Share) Button (pp. 20, 31, 101) FUNC./SET (Function/Set) Button (p. 44) MENU Button (p. 45) DISP. (Display) Button (p. 53) (Macro)/ Button (p. 60) (Jump)/ / Button (pp. 65, 107) (Flash)/ Button (p. 59) (Continuous)/ (Self-timer)/ (Single Image Erase)/ Button (pp.
43 The camera indicators will light or blink under the following conditions.
44 Basic Operations Menus and Settings Settings for the shooting or playback modes or such camera settings as the print settings, date/time and sounds are set using the FUNC. menu or the Rec., Play, Print or Set up menu. FUNC. Menu ( Button) This menu sets many of the common shooting functions. 1 2 5 3 4 • This example shows the FUNC. menu in mode. 1 2 3 4 5 Set the mode switch to on the camera. Press the Use the (shooting) and turn button. or button to select a menu item.
45 Rec., Play, Print and Set up Menu ( Button) Convenient settings for shooting, playback or printing can be set with these menus. 1 5 2 You can switch between menus with the or button. 3 • This example shows the Rec. menu in 1 2 3 4 5 Press the Use the menus. 4 mode. button. or button to switch between • You can also use the zoom lever to switch between menus. • The following menus are displayed. Shooting: Rec.
46 Information Displayed on the LCD Monitor and Menus Available Shooting Modes p. 189 Shooting Mode ac d e g i f h j Spot AE Point Frame/ b AF Frame k Camera Shake ( ) (p. 145) Exposure Shift Bar (p. 88) Recordable Shots (Stills)/ Remaining Time/Elapsed Time (Movies) Information Displayed a Shooting Mode Exposure Compensation, Recording b Pixels, etc. c Display Overlays d Red-Eye Corr. ( 1.6x/2.0x)/ MENU button (Rec.
47 About the Battery Charge Indicator Playback Mode (Detailed) l Low Battery Displayed image number/ Total number of images Folder Number-File Number o Shooting information Histogram nm Information Displayed l m Print List Compression (Still Images)/ n Recording Pixels (Still Images), o Setting Method button, MENU button (Print menu) Red-Eye Correction Function/ Resized image ( ) Image with Sound Memo ( ) Protection Status ( ) Movie ( Shooting Date/Time ) Auto Category ( My Category ( ) M
48 Information for images shot on other cameras may not display correctly. Histogram Function The histogram is a graph that allows you to check the brightness of an image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. By using the exposure compensation function, you can correct the image brightness before shooting (p. 90).
49 Rec. Menu * Default setting Menu Item Options Reference Page Face Detect*/AiAF/Center p. 82 AF-Point Zoom On/Off* p. 78 Digital Zoom (Still Image) Standard*/Off/1.6x/2.0x (Movies) Standard*/Off (In standard movie mode only) Flash Settings Self-timer Slow Synchro p. 55 On/Off* Red-Eye Corr. On/Off* Red-Eye Lamp On*/Off p. 76 Delay: 0 – 10*, 15, 20, 30 sec. Shots: 1 – 10 (Default setting is 3 shots.) p. 61 AF-assist Beam On*/Off p. 40 Review Off/ 2* sec. to 10 sec./Hold p.
50 Play Menu Menu Item Reference Page Slide Show p. 114 My Category p. 109 Red-Eye Correction p. 115 Resize p. 120 Sound Memo p. 122 Protect p. 124 Rotate p. 112 Erase all p. 125 Transfer Order p. 130 Resume p. 18 Transition p. 113 Print Menu Menu Item Summary Print Displays the print menu. Select Image & Qty. Configures print settings for individual images as you view them. Select All Images Configures print settings for all images. Reference Page – p.
51 Set up Menu Menu Item * Default setting Options Summary/Reference Page On/Off* Set to [On] to silence all operation sounds. (Except for when the memory card slot/battery cover is opened during recording.) Volume Off/ 1 / 2*/ 3 / 4 / 5 Adjusts the volume of the start-up sound, operation sound, selftimer sound, shutter sound and playback sound. The volume cannot be adjusted if [Mute] is set to [On]. Start-up Vol. Adjusts the volume of the start-up sound when the camera is turned on.
52 Menu Item Options Format Summary/Reference Page You can also select a low level format (p. 134). File Numbering Continuous*/ Auto Reset p. 135 Create Folder Create New Folder Check mark (On)/ No check mark (Off) Auto Create Off*/Daily/MondaySunday/Monthly (Creation time also can be set) p. 137 Auto Rotate On*/Off p. 139 Lens Retract 1 minute*/0 seconds Sets the lens retraction timing when switching from shooting mode to playback mode. Language p. 14 Video System NTSC/PAL p.
53 Using the LCD Monitor Switching LCD Monitor Display Modes No Information Information View Off Playback Mode or Rec. Review (Right After Shooting) No Information Standard Display* * Playback mode only Focus Check* * Still image only Detailed Display Basic Operations Each press of the DISP. button, changes the display mode of the LCD monitor. See Information Displayed on the LCD Monitor and Menus for details (p. 46). The following are the screens that display when shooting in mode.
54 z The LCD monitor will not switch to the detailed display or focus check display in magnified display (p. 103), or index playback mode (p. 104). z Overexposure Warning In the following cases, overexposed portions of the image blink.
55 Commonly Used Shooting Functions Using the Optical Zoom 1 Press the zoom lever toward or . • Telephoto: Zooms in on the subject. • Wide Angle: Zooms out from the subject. Using the Digital Zoom/ Digital Tele-Converter Available Shooting Modes p. 189 You can combine digital zoom with optical zoom when shooting. The available shooting characteristics and focal lengths (35mm film equivalent) are as follows. Selection Focal Length Standard 35 – 560 mm Off 35 – 140 mm 1.6x 56 – 224 mm 2.
56 About the Safety Zoom Depending on the number of recording pixels set, you can shift from optical zoom to digital zoom without pausing up to a factor where the image quality does not deteriorate (Safety Zoom). displays when reaching the maximum zoom factor without image deterioration. Pressing the zoom lever toward again allows you to zoom even further (not available in ). Depending on the number of recording pixels set, the Safety Zoom zone varies as follows.
57 Shooting with the Digital Zoom 1 Select [Digital Zoom]. 1. Press the button. 2 Make settings. 1. Use the or [Standard]. 2. Press the 3 button to select button. Press the zoom lever toward and shoot. • The combined digital and optical zoom setting will display in the LCD monitor. • The image may appear coarse depending upon the selected recording pixels (the zoom factor appears in blue). • Press the zoom lever toward to zoom out. Commonly Used Shooting Functions 2.
58 Shooting with the Digital Tele-Converter The digital tele-converter feature uses digital zoom to achieve the effects of a tele-converter (a lens used in telephoto shooting). 1 Select [Digital Zoom]. 1. Press the button. 2. In the menu, use the or button to select [Digital Zoom]. 2 Make settings. 1. Use the or [1.6x] or [2.0x]. 2. Press the 3 button to select button. Adjust the angle of view with the zoom lever and shoot. • and the zoom factor appear on the LCD monitor.
59 Using the Flash Available Shooting Modes Press the 1. Use the or flash settings. button. button to select the : [Auto] : [On] : [Off] • You can configure detailed settings for the flash when you press the MENU button while this screen is displayed (p. 76). You are recommended to shoot with the camera attached to a tripod or other device if the camera shake warning icon ( ) appears. Commonly Used Shooting Functions 1 p.
60 Shooting Close-ups (Macro) Available Shooting Modes p. 189 Use this mode to shoot close-ups of flowers or small items. The image area at the minimum shooting distance from the end of the lens to the subject (5 cm) (2.0 in.) is 59 × 44 mm (2.3 × 1.7 in.). 1 Press the 1. Use the button. or button to select To Cancel the Macro Mode: Press the button and use the or . button to select (Normal).
61 Using the Self-Timer Available Shooting Modes p. 189 10 sec. Self-Timer: The shutter releases 10 seconds after the shutter button is pressed. • 2 seconds before the shutter releases, the self-timer sound beeps quickly and the lamp will speed up. 2 sec. Self-Timer: The shutter releases 2 seconds after the shutter button is pressed. • The self-timer sound beeps quickly and the self-timer lamp blinks when the shutter button is pressed and the shutter releases 2 seconds later.
62 2 Shoot. • When you press the shutter button fully, the self-timer lamp will blink.* * When [Red-Eye Lamp] is set to [On] in [Flash Settings] in the Rec. menu, the self-timer lamp will light 2 seconds before the flash fires (p. 76). To Cancel the Self-Timer: Press the button and the or button to select . Changing the Delay Time and Number of Shots ( 1 Select [Self-timer]. 1. Press the button. 2. In the menu, use the or button to select [Self-timer]. 3. Press the 2 button. Make settings. 1.
63 Changing the Recording Pixels (Still Images) Available Shooting Modes Select the recording pixels. 1. Press the button. 2. Use the or button to select and the or button to change the recording pixels. 3. Press the button. Approximate Values for Recording Pixels Recording Pixels Large 8M 3264 × 2448 Medium 1 5M 2592 × 1944 Medium 2 3M 2048 × 1536 Medium 3 2M 1600 × 1200 Small Date Stamp Widescreen 0.
64 z See Memory Cards and Estimated Capacities (p. 181) z See Image Data Sizes (Estimated) (p. 182) Changing the Compression (Still Images) Available Shooting Modes 1 p. 189 Select a compression setting. 1. Press the 2. Use the or and the or the option. 3. Press the button. button to select button to change button. Approximate Values for Compression Settings Compression Purpose Superfine High Quality Shoot higher quality images. Fine Shoot normal quality images. Normal Shoot more images.
65 Adjusting the ISO Speed Available Shooting Modes p. 189 1 Press the 1. Use the or the ISO speed. button. button to change • When you select (Auto) or (High ISO Auto), the camera sets the optimal ISO speed for the light level when shooting. As the ISO speed will automatically be raised in dark places, shutter speed will increase, reducing camera shake and subject blurring. • Select to put priority on image quality. • When you select , the camera also detects motion and sets the optimum ISO speed.
66 Shooting Using the Mode Dial Mode Dial Image Zone The camera automatically selects settings. : Auto (p. 15) : Easy (p. 17) Image Zone When a shooting mode appropriate for the shooting conditions is selected, the camera automatically adjusts settings for optimal shooting. : Portrait : Landscape : Night Snapshot : Kids&Pets : Indoor : Special Scene (p. 67) : Night Scene : Foliage : Beach : Aquarium : Sunset : Snow : Fireworks : Movie (pp.
67 Shooting Modes for Specific Scenes Available Shooting Modes p. 189 When a shooting mode appropriate for the shooting conditions is selected, the camera automatically adjusts settings for optimal shooting. 1 , , , or (Special Scene) Set the mode dial to , or . : 1. Press the 2. Use the the or mode. 3. Press the , , , button. and or to select to select the scene button. Portrait Produces a soft effect when photographing people.
68 Night Snapshot Allows you to take snapshots of people against twilight or night backgrounds by reducing the effects of camera shake when firmly holding the camera, even without using a tripod. Kids&Pets Allows you to capture subjects that move around, such as children and pets, without missing photo opportunities. Indoor Prevents camera shake and maintains the subject’s true color when shooting under fluorescent or tungsten lighting.
69 Snow Shoots without a blue tinge and without making people appear dark against a snowy background. Fireworks Captures fireworks in the sky sharply and at optimal exposure. Aquarium Selects the optimal ISO speed, white balance and color balance to capture fish and other items in an indoor aquarium. z The shutter speed is slow in or mode. Always use a tripod to avoid camera shake. z In , , or mode, the ISO speed may increase and cause noise in the image depending on the scene being shot.
70 Shooting in the Manual Mode Available Shooting Modes Allows you to select settings yourself, such as the exposure compensation, white balance or My Color settings. 1 Set the mode dial to 2 Shoot. . p.
71 Movie Shooting Available Shooting Modes p. 189 The following movie modes are available. The recording time will differ according to the memory card used (p. 182). You can select the recording pixels and record until the memory card is full*1. The digital zoom can be used while shooting in this mode (p. 55).
72 3 Shoot. • Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. • Pressing the shutter button fully starts recording video and sound simultaneously. • During shooting, the recording time and [zRec] appear on the LCD monitor. • Pressing the shutter button fully again stops recording. Recording will stop automatically under the following circumstances. - When the maximum recording time or maximum recording capacity is reached.
73 z Adjust the zoom setting before shooting. The combined Shooting Using the Mode Dial digital and optical zoom factor will display on the LCD monitor. When the zoom factor displays in blue, the image will deteriorate. z You can use digital zoom during the movie shooting in mode only. z QuickTime is required to play back movies (Data type: AVI/ Compression method: Motion JPEG) on a computer (Windows 2000 only).
74 Changing Movie Recording Pixels/Frame Rates You can change the recording pixels and frame rate when the movie mode is set to (Standard). The frame rate can be set depending on the recording pixels. 1 Select the recording pixels. 1. Press the button. 2. Use the or button to select and the or button to change the recording pixels. 3. Press the button. Movie Recording Pixels and Frame Rates Frame rates indicate the number of frames recorded or played back each second.
75 Advanced Shooting Functions Continuous Shooting Available Shooting Modes p. 189 *Recommended Memory Card: Super high-speed SDC-512MSH memory card (sold separately) to which low-level formatting (p. 134) is conducted immediately before shooting. • Except (Large/Super Fine) mode. • This reflects standard shooting criteria established by Canon. Actual results may vary according to the subject and shooting conditions. • Even if continuous shooting suddenly stops, the memory card may not be full.
76 z The interval between shots lengthens when the built-in memory of the camera fills. z If the flash is used, the interval between shots lengthens because the flash must charge. Setting the Flash Available Shooting Modes p. 189 You can make detailed flash settings to fit the shooting conditions. Flash Settings Slow Synchro The flash is used with slow shutter speeds to shoot.
77 Displaying and Setting [Flash Settings] 1 Select [Flash Settings]. 1. Press the button. 2. In the menu, use the or button to select [Flash Settings]. 3. Press the Make settings. 1. Use the or to select the option. 2. Use the setting. or button to make the 3. Press the 3 Press the Example in Av mode button. button. [Flash Settings] can also be displayed by pressing the button, followed by the MENU button. Advanced Shooting Functions 2 button.
78 Checking the Focus and Peoples’ Expressions Available Shooting Modes p. 189 You can zoom the display of the AF frame to check focus when shooting or right after taking a shot. Zooming the AF Frame and Shooting When [AF Frame] is set to [Face Detect] or [Center], the AF frame area can be zoomed to check focus while shooting. When you want to capture people’s expressions, set [AF Frame] to [Face Detect]. When you want to check the focus while shooting in macro mode, set [AF Frame] to [Center].
79 3 Press the shutter button halfway. 4 Press the shutter button fully to shoot. The AF frame cannot be zoomed under the following circumstances: - When [AF Frame] is set to [Face Detect] and a face is not detected, or when the face is extremely large in relation to the overall composition. - When the camera cannot focus. - When the digital zoom is in use. - When the LCD monitor is off. - When a TV is being used as the display.
80 Checking Focus Right After Shooting (Focus Check) Allows you to check the focus of an image taken. It is also easy to check peoples’ expressions and look for closed eyes when shooting because a frame the size of the face displays when AF frame mode is set to [Face Detect] (p. 82). You are recommended to set [Review] to [Hold] in the menu in advance. 1 Select [Review Info]. 1. Press the button. 2. In the menu, use the or button to select [Review Info]. 2 Make settings. 1. Use the or [Focus Check].
81 3 Shoot. • The recorded image will be displayed. Orange frame contents Frame color Orange White Content Displays the area of the image shown at the bottom right. Displays at the focal point (AF frame). • The orange frame can be shown at a different magnification, moved or switched to a different frame (p. 106). To Cancel the Focus Check: Press the shutter button halfway. z Pressing the button while the image is displayed will erase the image (p. 19).
82 Selecting an AF Frame Mode Available Shooting Modes p. 189 The AF frame indicates the area of the composition on which the camera focuses. The camera detects a face and sets the focus, exposure*1 and white balance*2. In addition, the camera meters the subject so that the face is correctly illuminated when the flash fires. If no face is detected, the camera shoots using [AiAF]. Face Detect *1 Only in evaluative metering mode (p. 91). *2 Only in (p. 94).
83 z [Face Detect] cannot be used when the LCD monitor is turned off. z The AF frame appears as follows when the shutter button is pressed halfway. - Green : In focus - Yellow : Focusing difficulty ([Center] option) - No AF frame : Focusing difficulty ([Face Detect] or [AiAF] option) z Maximum of three AF frames will be displayed at the positions of faces the camera recognizes. At this point, the frame the camera judges to be the main subject appears in white while the others appear in gray.
84 Selecting a Subject to Focus On (Face Select and Track) Available Shooting Modes p. 189 Once the focus is fixed to a subject’s face, the frame can be set to follow the subject within a certain range. To use the Face Select and Track function, first configure the following settings. - Set [AF Frame] to [Face Detect] (p. 82). - Register the (Face Detect) function to the button (p. 101). 1 Select a face you wish to focus on. 1.
85 3. Press the Press the shutter button halfway. • The face frame ( 3 ) of main subject will change into . Press the shutter button fully to shoot. In the following cases, the face select mode will be canceled. - When turning the power back on - Using the digital zoom - When the button is pressed to display the menu - When a selected face cannot be tracked for several seconds - When the display is turned off Advanced Shooting Functions 2 button again.
86 Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) Available Shooting Modes p. 189 It may be difficult to focus on the following types of subjects. • Subjects with extremely low contrast to the surroundings • Scenes with a mixture of near and far subjects • Subjects with extremely bright objects at the center of the composition • Subjects that are moving quickly • Subjects through glass When this happens, first lock the focus and then recompose the shot.
87 3 Press the shutter button halfway and press the button. • 4 will display. Recompose the image and press the shutter button fully. z When shooting with the focus lock or AF lock using the LCD monitor, setting [AF Frame] to [Center] (p. 82) makes shooting easier since the camera focuses using the center AF frame only. z AF frames do not display in mode.
88 Locking the Exposure Setting (AE Lock) Available Shooting Modes p. 189 You can set the exposure and focus separately. This is effective when shooting on ski slopes, beaches and other scenes where there is an extremely strong contrast between the background and a backlit subject, or a mix of bright and dark areas. You can set an exposure that best matches the shot you wish to take. 1 2 3 Turn on the LCD monitor. Focus the camera on the subject on which you wish to lock the exposure setting.
89 Shooting with FE Lock Available Shooting Modes p. 189 You can use FE lock to set the flash output for the best exposure of your subject regardless of the composition of the shot. 4 Turn on the LCD monitor. Press the (On). Focus the camera on the subject on which you wish to lock the exposure setting. Press the shutter button halfway and press the button. • 5 button to select will display. Re-aim the camera to compose the shot and shoot. To Release the FE Lock: Press the button.
90 Adjusting the Exposure Compensation (Still Images) Available Shooting Modes p. 189 Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background. 1 Adjust the exposure compensation. 1. Press the button. 2.
91 Switching between Metering Modes Available Shooting Modes Evaluative Spot 1 Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering. It evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.
92 Setting a Slow Shutter Speed (Long Shutter Mode) Available Shooting Modes p. 189 You can set the shutter speed to a slow setting to make dark subjects appear brighter. 1 Select the Long Shutter Mode. 1. Press the button. or button to select 2. Use the . 3. Press the 2 button. Adjust the setting. 1. Use the or button to change the shutter speed. 2. Press the button. • The higher the value, the brighter the recorded image becomes. • If you press the DISP.
93 z Use the LCD monitor to confirm that the image was recorded at the desired brightness. z Please note that camera shake becomes a factor at low shutter speeds. Shoot with the camera attached to a tripod. z Use of the flash may result in an over-exposed image. If this occurs, shoot with the flash set to .
94 Adjusting the Tone (White Balance) Available Shooting Modes p. 189 Normally, the (Auto) white balance setting selects an optimal white balance. When the setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. 1 Auto Settings are automatically set by the camera. Day Light For recording outdoors on a bright day. Cloudy For recording under overcast, shady or twilight skies.
95 Using the Custom White Balance 1 Select . 1. Press the button. 2. Use the or and use the select . 2 button to select or button to Aim the camera at a piece of white paper or cloth and press the button. • Ensure that the LCD monitor is completely filled with the white image. Please note, however, that the center frame will not display when the digital zoom is used or when is displayed. • You can also use the viewfinder to take a custom white balance reading. 3 Press the button.
96 z You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). z Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed.
97 Shooting in a My Colors Mode Available Shooting Modes p. 189 You can change the look of an image when it is shot. 1 Records normally with this setting. Vivid Emphasizes the contrast and color saturation to record bold colors. Neutral Tones down the contrast and color saturation to record neutral hues. Sepia Records in sepia tones. B/W Records in black and white. Custom Color Use this option to adjust contrast, sharpness and saturation before shooting. / / Select a My Colors setting. 1.
98 (Setting the Custom Color Mode) 1 Select . 1. Press the 2. Use the and the 2 button. or or button to select button to select . Adjust the setting. 1. Press the button. 2. Use the or button to select [Contrast], [Sharpness] or [Saturation]. 3. Use the setting. or button to adjust the Select an item Adjust • The adjustment results show in the LCD monitor. • If you press the DISP. button, you will return to the screen where you can select a My Colors mode. 4. Press the button.
99 Setting the Display Overlays Available Shooting Modes p. 189 You can display vertical and horizontal grid lines, a 3:2 print area guide, or both on the LCD monitor while shooting to help check the position of your subject. – Grid Lines Displays grid lines to divide the screen into 9 parts. Helps confirm the vertical and horizontal positioning of the subject. 3:2 Guide Helps confirm the print area for L-size or postcard size in 3:2 aspect ratio*. Areas outside the printable area are grayed out.
100 Categorizing Images Automatically (Auto Category) Available Shooting Modes p. 189 If you set Auto Category to [On], images are automatically sorted into preset categories as they are recorded. 1 People For images shot in , or mode, or images with faces detected when [AF Frame] is set to [Face Detect]. Scenery For images shot in , , or Events For images shot in , , , mode. or mode. Select [Auto Category]. 1. Press the button. 2.
101 Registering Settings to the Button Available Shooting Modes p. 189 You can register a function that you often use when shooting with the button. 1 Select [Set 1. Press the Page – Menu Item Red-Eye Corr. Digital Teleconverter Page p. 76 p. 90 Disp. Overlay p. 99 p. 94 Display Off p. 51 p. 82 p. 95 button]. button. 2. In the menu, use the button to select [Set 3. Press the 2 p. 58 or button]. button. Make settings. 1.
102 Using the 1 Press the Button button. • For , and , each time that the button is pressed, the settings of the registered functions are switched. • For , and , the corresponding setup screen is displayed. • For , each press of the button records the white balance data. Since the frame does not appear at this point, ensure that the white paper or cloth is positioned so it appears at the center of the LCD monitor and then press the button.
103 Playback/Erasing Please also see Viewing Still Images (p. 18). Viewing Magnified Images 1 Press the zoom lever toward . will display at the upper right and a magnified portion of the image will display. • Images can be magnified up to a factor of approximately 10x. 2 Use the , the image. , or Approximate location of the displayed area button to move around • If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and will display.
104 Viewing Images in Sets of Nine (Index Playback) 1 Press the zoom lever toward . Selected Image • Up to nine images can be viewed at once in index playback. • Use the , , or button to change the image selection. Movie To Return to Single Image Playback: Press the zoom lever toward . Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward while in index playback and you can switch the display between sets of nine images.
105 Check the Focus and Facial Expressions of Subjects (Focus Check Display) Focus Check display allows you to check the focus of images taken. Moreover, as you can change the display size and switch images, you can easily check facial expressions and whether a subject’s eyes are closed. Displaying the Focus Check 2 Set the mode switch to (playback). Playback/Erasing 1 Press the button several times until the Focus Check displays. • Frames are displayed on the image as follows.
106 Changing the Display Size and Switching Frames 3 Press the zoom lever toward . • Bottom right of the screen will be displayed prominently and the display size and display position can be changed. 4 Change the setting. • You can change the display size by pressing the zoom lever. • You can change the display position by using the , , or button. • When you press the FUNC./SET button, the orange frame returns to its original position. When there are multiple frames displayed, the FUNC.
107 Jumping to Images When you have many images recorded onto a memory card, it is handy to use the search keys below to jump over images to find the object of your search. Jumps to the first image of each shooting date. Jump to My Category Jumps to the first image of each folder sorted by the Auto Category (p. 100) or My Category (p. 109) functions. Jump to Folder Displays the first image in each folder. Jump to Movie Jumps to a movie. Jump 10 images Jumps over 10 images at a time.
108 3 Display the Images. 1. Press the or button. Number of images matching search key • Pressing the MENU button cancels the setting. • Press the FUNC./SET button to display the movie control panel (p. 111) when the is selected . Location of image currently being displayed To Return to Single Image Playback: Press the MENU button.
109 Organizing Images by Category (My Category) You can organize images into prepared categories. Once organized into categories, you can jump to and display the image you want (p. 107). People My Category 1 – 3 Scenery To Do 1 Select [My Category]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 or button. Make settings. 1. Use the or button to select an image to classify. 2. Use the category. 3. Press the or button to select a button.
110 Viewing Movies 1 Display a movie. 1. Use the movie. or 2. Press the button to select a button. • Images with a 2 icon are movies. Play the movie. 1. Use the . 2. Press the or Movie Control Panel button to select button. • The movie will pause if you press the FUNC./SET button during playback. It will resume when you Playback Progress Bar press the button again. Time movie was shot • When playback ends, the movie Volume Level stops at the last frame displayed.
111 Operating the Movie Control Panel Ends playback and returns to single image playback. Print An icon will display when a printer is connected. See the Direct Print User Guide for details. Play Play. Slow Motion You can use the button to slow down or the button to speed up playback. First Frame Displays the first frame. Previous Frame Rewinds if the FUNC./SET button is held down. Next Frame Fast Forwards if the FUNC./SET button is held down. Last Frame Displays the last frame.
112 Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. Original 1 90° Select [Rotate]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 270° or button. Rotate the image. 1. Use the 2. Press the or button to select an image to rotate. button. • Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. • This also can be set in the index playback mode.
113 Playback with Transition Effects You can select the transition effect displayed when switching between images. No transition effect. The displayed image darkens and the next image gradually brightens until it is displayed. 1 Select [Transition]. 1. Press the button. 2. In the menu, use the button to select . 2 or Make settings. 1. Use the or button to select a transition effect. 2. Press the button.
114 Automated Playback (Slide Shows) Use this feature to automatically play back all of the images in the memory card. The LCD monitor displays each image for approximately 3 seconds. No transition effect. The new image gradually brightens as it moves upward from the bottom. The previous image moves to the left and the next image display from the right. 1 Select [Slide Show]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 or button. Select an effect. 1.
115 3 Play. 1. Press the button. In single image playback mode, you can start a slide show from the current image displayed by holding the FUNC./SET button while you press the button. Please note that if you do this while the last image shot is displayed, the slide show will start from the first image using the same date. Red-Eye Correction Function You can correct red eyes in recorded images. Red eyes may not be automatically detected in some images or the results may not turn out as you intended.
116 1 Select [Red-Eye Correction]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 or button. Select an image. 1. Use the or button to select the image you wish to correct red eyes. 2. Press the button. • A frame will automatically display where red-eye is detected. • If red-eye is not automatically detected, select [Add Frame] with the or button and press FUNC./SET button (p. 118). • To cancel the correction frame, select [Remove Frame] and press the FUNC.
117 4 Save the image. 1. Use the or button to select [New File] or [Overwrite]. 2. Press the button. 5 Display the saved image. 1. Press the 2. Use the [Yes]. 3. Press the button. or button to select button. • Selecting [No] returns to the Play menu. z Red-eye correction cannot be performed on movies. z Overwriting cannot be performed on protected images. z When there is not enough space left on the memory card, red-eye correction cannot be performed.
118 Add Correction Frame 1 Select [Add Frame]. 1. Use the , , or select [Add Frame]. 2. Press the button to button. • A green frame will display. 2 Adjust the position of the correction frame. 1. Use the , , move the frame. or button to • Size of the frame can be changed with the zoom lever. 3 Add additional correction frames. 1. Press the button. • A correction frame is added and the frame color changes to white. • If you wish to add additional frames, adjust the position and press the FUNC.
119 Removing Correction Frames 1 Select [Remove Frame]. 1. Use the , , or button to select [Remove Frame]. 2. Press the Adjust the position of the correction frame. 1. Use the or button to select a frame to remove. • The selected frame will appear in green. 3 Delete the frame. 1. Press the button. • The selected frame will disappear. • To continue deleting frames, repeat operations from step 2. • When you finish deleting frames, press the MENU button. Playback/Erasing 2 button.
120 Resizing Images You can resave images that were recorded at high recording pixel settings at lower settings. 1600 × 1200 pixels 640 × 480 pixels 320 × 240 pixels 1 Select [Resize]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 or button. Select an image. 1. Use the or button to select an image to resize. 2. Press the button. • The FUNC./SET button is not selectable for images that cannot be resized. 3 Select a resolution. 1. Use the or resolution. 2.
121 4 Save the image. 1. Use the [OK]. or 2. Press the button to select button. 5 Display the saved image. 1. Press the 2. Use the [Yes]. 3. Press the button. or button to select button. • Selecting [No] returns to the Play menu. and images shot in mode cannot be resized. Playback/Erasing • The resized image will be saved in a new file. The original image will remain. • If you wish to continue resizing of another image, repeat operations from step 2.
122 Attaching Sound Memos to Images In playback mode, you can attach sound memos (up to 1 min.) to an image. The sound data is saved in the WAVE format. 1 Select [Sound Memo]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 or button. Select an image. 1. Use the or button to select an image to which you wish to attach a sound memo. 2. Press the button. • The sound memo control panel will display. 3 Record the memo. 1. Use the 2. Press the or button to select .
123 Sound Memo Panel Use the button. Exit or button to select an option and press FUNC./SET Returns to the playback screen. Record Starts recording. Pause Pauses recording or playback. Begins playback. Erase Erases sound memos. (Select [Erase] and in the confirmation screen press the FUNC./SET button.) z You cannot attach sound memos to movies. z Sound memos for protected images cannot be erased.
124 Protecting Images You can protect important images and movies from accidental erasure. 1 Select [Protect]. 1. Press the button. 2. In the menu, use the button to select . 3. Press the 2 or button. Protect an image. 1. Use the or button to select an image to protect. 2. Press the button. • The protection icon appears on the lower left of image. Protection Icon • Pressing the FUNC./SET button again cancels the setting. • If you wish to continue protecting of another image, repeat operations.
125 Erasing All Images You can erase images from a memory card. z Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. z Protected images cannot be erased with this function. 1 Select [Erase all]. button. 2. In the menu, use the button to select . 3. Press the 2 or button. Erase the images. 1. Use the [OK]. 2. Press the or button to select button. • To exit instead of erasing, select [Cancel].
126 Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF. z The specified print settings are also applied to the Print List (p.
127 1 Select [Print Settings]. 1. Press the button. 2. Use the or menu. button to select the 3. Use the or [Print Settings]. button to select 4. Press the 2 button. Make settings. 2. Use the settings. 3. Press the or or button to select an button to specify the button. z The Date and File No. settings change according to the Print Type as follows. - [Index]: [Date] and [File No.] cannot be set to [On] at the same time. - [Standard] or [Both]: [Date] and [File No.
128 Single Images When [Print Type] (p. 126) is set to [Standard] or [Both], the number of copies can be set. 1 Select [Select Images & Qty.]. 1. Press the button. 2. Use the or menu. button to select the 3. Use the or button to select [Select Images & Qty.]. 4. Press the 2 button. Select the images. • Selection methods differ for the Print Type settings (p. 126). Standard ( 1. Use the images. )/Both ( ): or button to select the 2. Press the Number of Print Copies button. 3.
129 All the Images on a Memory Card One copy of every image will be set to print. 1 Select [Select All Images]. 1. Press the button. 2. Use the or menu. button to select the 3. Use the or button to select [Select All Images]. 4. Press the Select [OK]. 1. Use the [OK]. 2. Press the or button to select button. z Images are printed in order according to the file number. z A maximum of 998 images can be selected. z When the camera is connected to a printer, the button will light blue.
130 Setting the DPOF Transfer Settings You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the DPOF standards. The icon may display for a memory card with transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera. 1 Select [Transfer Order]. 1. Press the button. 2.
131 Single Images 3 Select an image to transfer. Transfer Selection 1. Use the or button to select an image to transfer. 2. Press the button. • Pressing the FUNC./SET button again deselects the setting. • You can also select images in the index playback mode. 3. Press the button several times to end the setting. 3 Execute the transfering images. 1. Use the [OK]. or button to select 2. Press the button. 3. Press the button. z Images are transferred in order according to the file number.
132 Configuring the Camera Power Saving Function This camera is equipped with a power saving function, which can automatically turn off the power or LCD monitor. Auto Power Down When set to [On], the power will shut off in the following circumstances. Press the ON/OFF button again to restore power. Shooting mode: Approximately 3 minutes after the last control is accessed on the camera Playback mode or when connected to a printer: Approximately 5 minutes after the last control is accessed on the camera.
133 2 Make settings. 1. Use the option. or button to select an 2. Use the settings. or button to make 3. Press the 3 Press the button. button. The power saving function will not activate during a slide show or while the camera is connected to a computer.
134 Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. 1 Select [Format]. 1. Press the button. 2. Use the or menu. button to select the 3. Use the [Format]. button to select or 4. Press the 2 button. Make settings. 1. Use the [OK]. 2. Press the or button to select button.
135 Resetting the File Number The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. Continuous A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing folders or memory cards.* * When a blank memory card is used.
136 File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2000 images can be saved into a single folder.
137 Creating an Image Destination (Folder) You can create a new folder at any time and the recorded images will be automatically saved to that folder. Create New Creates a new folder the next time you shoot images. To Folder create an additional folder, insert the check mark again. You can also specify a date and time if you wish to create a Auto Create new folder using a shooting time after the specified date and time. Creating a Folder the Next Time You Shoot 1 Select [Create Folder].
138 Setting the Day or Time for Automatic Folder Creation 1 Select [Create Folder]. 1. Press the button to select the 3. Use the or [Create Folder]. button to select 4. Press the 2 button. 2. Use the or menu. button. Make settings. 1. Use the or button to select [Auto Create] and the or button to select a creation date. 2. Use the or [Time] and the select a time. 3. Press the • button to select or button to button. displays when the specified time arrives.
139 Setting the Auto Rotate Function Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor. 1 Select [Auto Rotate]. 1. Press the button to select the 3. Use the or [Auto Rotate]. button to select Make settings. 1. Use the or [Off]. 2. Press the or button to select [On] button.
140 When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be “up” and the lower end to be “down”. It then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function. Resetting Settings to Their Default Values 1 Select [Reset All]. 1. Press the button. 2. Use the or menu. button to select the 3. Use the or [Reset All]. button to select 4.
141 Connecting to a TV Shooting/Playback Using a TV You can use the supplied AV cable to shoot or playback images using a TV. 1 2 Turn off the camera and the TV. Connect the AV cable to the camera’s A/V OUT terminal. • Open the terminal cover and plug the AV cable in all the way. Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. VIDEO AUDIO Yellow Black 4 5 Turn on the TV and switch it to video mode. Turn on the camera.
142 z The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 52). The default setting varies between regions. - NTSC: Japan, U.S.A., Canada, Taiwan and others - PAL: Europe, Asia (excluding Taiwan), Oceania and others z If the video system is set incorrectly, the camera output may not display properly.
143 Troubleshooting • • • • • • • • • Camera (p. 143) When the power is turned on (p. 144) LCD monitor (p. 144) Shooting (p. 146) Shooting movies (p. 150) Playback (p. 151) Battery (p. 152) TV monitor output (p. 152) Printing with a direct print compatible printer (p. 153) Camera Camera will not operate. z Press the ON/OFF button (p. 42). Memory card slot/battery cover is open. z Confirm that the Memory card slot/ battery cover is securely closed (p. 11).
144 Sounds come from the camera interior. The camera’s horizontal/ vertical orientation was changed. z The camera’s orientation mechanism is operating. There is no malfunction. When the power is turned on “Card locked!” message appears. The SD memory card’s or z When recording to, erasing from or formatting the memory card, slide the SDHC memory card’s write protect tab upward (p. 165). write protect tab is set to “Write protect”. The Date/Time menu appears. The lithium date battery charge is depleted.
145 Display flickers. Display flickers when shot z This is not a camera malfunction under fluorescent lighting. (flickering recorded in movies, but not in still images). A bar of light (purplish red) appears on the LCD monitor. Sometimes appears when z This is a normal occurrence in devices containing CCDs and does not shooting a bright subject, constitute a malfunction. This bar of such as the sun or other light will not be recorded when light source.
146 Shooting Camera will not record. Camera is in playback mode or connecting to a computer/printer mode. z Switch to Shooting mode (p. 15). Flash is charging. z When the flash is charged, the indicator will light orange. Shooting is now possible (p. 43). Memory card is full. z Insert a new memory card (p. 10). z If required, download the images to a computer and erase them from the memory card to make space. Memory card is not formatted correctly. z Format the memory card (p. 134).
147 AF-assist Beam is set to [Off]. z In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 49). Take care not to obstruct the AF-assist Beam with your hand when used. Subject is out of focal range. z Shoot with the subject at the correct focusing distance (p. 176). z The camera may be set to an unintended function (such as macro). Cancel the setting.
148 Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on). (Flash z Set the flash to (Flash off) (p. 59). Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 65). z In , , and mode in the mode, the ISO speed increases and noise can appear. White dots appear on the image.
149 Eyes appear red. Light is reflected back from the eyes when the flash is used in dark areas. Continuous shooting slows down. The memory card’s z To enhance the continuous shooting performance has dropped. performance, you are recommended to low level format the memory card in the camera after you save all its images to your computer (p. 134). Recording images to memory card takes a long time. Memory card was formatted in another device. z Use a memory card formatted in your camera (p. 134).
150 Shooting movies The recording time may not display properly or shooting may stop unexpectedly. The following types of memory cards are used. - Slow recording cards. - Cards formatted on a different camera or a computer. - Cards which have had images recorded and erased repeatedly. z Although the recording time may not display properly during shooting, the movie will be recorded correctly on the memory card.
151 Playback Cannot play back. z Computer images that cannot be You attempted to play played back may play back if they are back images shot with added to the camera using the another camera or images supplied software program edited with a computer. ZoomBrowser EX or ImageBrowser. File name was changed with a computer or file location was changed. z Set the file name or location on the file format/structure of the camera. (Refer to the Software Starter Guide for details). Images cannot be edited.
152 Battery Batteries consumed quickly. Battery is not being used to its full capacity. z See Battery (p. 164). Batteries are not the right type. z Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries (p. 164). Battery capacity drops due to low ambient temperatures. z If shooting in a cold location, warm the batteries such as by placing them in your pocket before using them. Battery terminals are dirty. z Wipe the terminals well with a dry cloth before use.
153 Printing with a direct print compatible printer Cannot print The camera and printer are not properly connected. z Securely connect the camera and printer with the specified cable. The printer power is not turned on. z Turn on the printer power. The print connection method is not correct. z Select [Print Method] and select [Auto] (p. 52).
154 List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... Image is being recorded onto the memory card, red eye correction is being processed. Resetting all the camera and menu settings to default. No memory card You turned on the camera without a memory card installed, or with a memory card installed in the wrong orientation (p. 10).
155 Naming error! The file name could not be created because there is an image with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached. In the Set up menu, set [File Numbering] to [Auto Reset]; alternatively, save all the images you wish to retain onto a computer, then reformat the memory card. Please note that formatting will erase all the existing images and other data.
156 Incompatible WAVE A sound memo cannot be added to this image since the data type of the existing sound memo is incorrect. In addition, sound cannot be played back. Cannot modify image You attempted to resize or perform red eye correction on a movie or an image recorded with another camera. Or you attempted to resize an image already resized to or an image shot in . Cannot assign to category You attempted to categorize an image recorded in a different camera.
157 Communication error The computer was unable to download the image due to the large amount of images (approx. 1000) stored on the memory card. Use a USB card reader or a PCMCIA card adapter to download the images. Lens error, restart camera An error was detected while the lens was in motion, and the power has been automatically turned off. This error can occur if you hold the lens while it is in motion or you operate it in a location with excessive dust or sand in the air.
158 Appendix Safety Precautions z Before using the camera, please ensure that you read the safety precautions described below and in the “Safety Precautions” section. Always ensure that the camera is operated correctly. z The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
159 z Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. z To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. z Stop operating the equipment immediately if it emits smoke or noxious fumes. z Do not allow the equipment to come into contact with, or become immersed in, water or other liquids.
160 Battery z Do not place the batteries near a heat source or expose it to direct flame or heat. z The batteries should not be immersed in water or sea water. z Do not attempt to disassemble, alter or apply heat to the batteries. z Avoid dropping or subjecting the batteries to severe impacts that could damage the casing. z Use only recommended batteries and accessories. Failure to follow these precautions may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
161 z Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging or when not in use to avoid fire and other hazards. z Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the battery charger while it is charging. Leaving the units plugged in for a long period of time may cause them to overheat and distort, resulting in fire. z When recharging the Canon AA-size NiMH batteries, use only a specified battery charger.
162 Cautions Equipment z Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap. z Be careful not to bump or strongly push the end of the lens. The above-mentioned could lead to injury or damage the equipment. z Be careful not to allow dust or sand into the camera when using it at a beach or place with strong winds. Such conditions could lead to damage.
163 Flash z Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. z Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash. z Do not touch the surface of the flash after taking several pictures in rapid succession. Doing so could result in burns.
164 Preventing Malfunctions Camera Avoid Strong Magnetic Fields z Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
165 z Never mix unused and partially used batteries. The partially used batteries may leak. z Do not install the batteries with their terminals ( reversed. and ) z Do not mix batteries of different types or from different manufacturers. z Before installing the batteries, wipe the battery terminals well with a dry cloth.
166 z Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. z Do not attempt to disassemble or alter the memory card. z Do not allow dirt, water or foreign objects to contact the terminals on the back of the memory card. Do not touch the terminals with your hands or metal objects. z Do not peel away the original label on the memory card or cover it with another label or sticker.
167 z Be careful when transferring or disposing of a memory card. Formatting or erasing the data on a memory card merely changes the file management information on the memory card and does not ensure that its contents are completely deleted. When disposing of a memory card, take precautions, such as physically destroying the memory card, to prevent personal information leaks.
168 z The CB-5AH/CB-5AHE battery charger can only be used to charge Canon AA-size NiMH batteries NB-3AH. z Do not mix batteries with different purchase dates or z z z z z different charge states. When recharging batteries, always recharge both of them at the same time. Do not attempt to recharge fully charged batteries, as doing so may reduce or impair battery performance. Also, do not charge batteries for more than 24 consecutive hours.
169 z If you store batteries for a long period of time (about 1 year), it is recommended that you deplete the batteries in the camera and to then store them at room temperature (0 to 30°C/32 to 90°F) in low humidity. Storing them in a fully charged condition can shorten their lifespan or degrade their performance. Again, if you do not use batteries for more than 1 year, fully charge them once a year and deplete them in the camera before storing them.
170 Using the AC Adapter Kit ACK800 It is best to power the camera with AC Adapter Kit ACK800 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the AC adapter. 1 2 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. Compact Power Adapter CA-PS800 Open the terminal cover and attach the cord to the DC IN terminal.
171 Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera’s built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation. Tripod Sockets z The flash charge time will lengthen as the battery charge gets weaker.
172 z For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots. z Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both. z Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed.
173 Replacing the Date Battery If the Date/Time in the Set up menu appears when the camera power is turned on, the date battery charge is low and the date and time settings have been lost. Please purchase a lithium coin battery (CR1220) and replace it as follows. The date battery is preinstalled at the factory and may therefore expire earlier than its rated lifespan after the camera has been purchased. Be particularly careful to keep the date batteries out of the reach of children.
174 5 6 7 8 Remove the battery by pulling it up in the direction indicated by the arrow. Insert a new battery with the (–) side facing up. (–) side Replace the battery holder and close the cover. When the Date/Time menu appears, set the date and time (p. 13). After purchasing the camera and turning on the power for the first time, although the Date/Time menu will appear, you do not need to replace the date battery.
175 Camera Care and Maintenance Never use thinners, benzine, detergents or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Never use organic solvents on the camera body or lens.
176 Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot A580 (W): Max. wide angle (T): Max. telephoto Camera Effective Pixels : Approx. 8 million Image Sensor : 1/2.5-inch type CCD (Total number of pixels: Approx. 8.3 million pixels) Lens : 5.8 (W) – 23.2 (T) mm (35mm film equivalent: 35 (W) – 140 (T) mm) f/2.6 (W) – f/5.5 (T) Digital Zoom : Approx. 4.0x (Up to approx.
177 Metering System : Evaluative*1/Center-weighted average or Spot*2 *1 Facial brightness is also evaluated in Face Detect AF. *2 Fixed to center Exposure Compensation : ±2 stops in 1/3-stop increments ISO Speed (Standard Output Sensitivity, Recommended Exposure Index) : Auto*1, High ISO Auto*2, ISO 80/100/200/400/ 800/1600 White Balance : Auto*, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H or Custom Built-in Flash : Auto, on, off • Facial brightness is also evaluated in Face Detect AF.
178 Data Type : Still images: Exif 2.2 (JPEG)* : Movies: AVI (Image data: Motion JPEG; Audio data: WAVE (monaural)) : Sound Memo: WAVE (monaural) * This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
179 Playback Modes : Single (histogram displayable), Index (9 thumbnail images), Magnified (approx. 2x to 10x max.), Resume Playback, Image Inspection Tool, Jump, My Category, Movie Playback (slow motion available), Rotate, Slide Show, Red-Eye Correction, Resize, Sound memos (it is possible to record and playback up to 1 min.
180 Battery Capacity Number of Images Shot LCD Monitor On (Based on the CIPA standard) Playback Time Approx. 220 images Approx. 9 hours Approx. 500 images Approx. 11 hours AA-size Alkaline Batteries (included with the camera) AA-size NiMH Batteries (NB-3AH (fully charged)) z The actual figures will vary according to the shooting conditions and settings. z Movie data is excluded.
181 Memory Cards and Estimated Capacities : Memory card included with the camera Recording Pixels (Large) 3264 × 2448 pixels (Medium 1) 2592 × 1944 pixels (Medium 2) 2048 × 1536 pixels (Medium 3) 1600 × 1200 pixels (Small) 640 × 480 pixels Compression 32 MB 8 14 30 11 21 42 18 33 66 30 53 102 114 177 278 SDC-128M SDC-512MSH 35 139 59 231 123 479 49 190 87 339 173 671 76 295 136 529 269 1041 121 471 217 839 411 1590 460 1777 711 2747 1118 4317 53 217 839 (Widescreen) 3264 × 1832 pixels 11 19 41 47
182 Movie : Memory card included with the camera Standard Compact Recording Pixels/ Frame Rate 640 × 480 pixels 20 frames/sec. 640 × 480 pixels 20 frames/sec. LP 320 × 240 pixels 30 frames/sec. 160 × 120 pixels 15 frames/sec. • Maximum movie clip length at continuous recording time. 32 MB SDC-128M SDC-512MSH 23 sec. 1 min. 36 sec. 6 min. 12 sec. 47 sec. 3 min. 10 sec. 12 min. 16 sec. 44 sec. 3 min. 1 sec. 11 min. 42 sec. 3 min. 36 sec. 14 min. 29 sec. 55 min. 57 sec. : 3 min.
183 MultiMediaCard Interface Dimensions Weight Compatible with MultiMediaCard standards 32.0 × 24.0 × 1.4 mm (1.26 × 0.94 × 0.06 in.) Approx. 1.5 g (0.05 oz.) SD Memory Card Interface Dimensions Weight Compatible with SD memory card standards 32.0 × 24.0 × 2.1 mm (1.26 × 0.94 × 0.08 in.) Approx. 2 g (0.07 oz.) NiMH Battery NB-3AH (Supplied with the separately sold NiMH Battery NB4-300 set or the Battery and Charger Kit CBK4-300) AA-size nickel metal hydride battery 1.2 V DC 2500 mAh (min.
184 Battery Charger CB-5AH/CB-5AHE (Supplied with the separately sold Battery and Charger Kit CBK4-300) Rated Input Rated Output Charging Time Operating Temperatures Dimensions Weight 100 – 240 V AC (50/60 Hz) 565 mA ×4, 1275 mA ×2 Approx. 4 hours 40 min.*1, Approx. 2 hours*2 0 – 35 °C (32 – 95 °F) 65.0 × 105.0 × 27.5 mm (2.56 × 4.13 × 1.08 in.) Approx. 95 g (3.35 oz.
Index 185 Index Numerics 3:2 Guide ................................... 99 A AC Adapter Kit ACK800...........170 Accessories................................ 36 AF Frame .............................46, 82 AF-assist Beam....................40, 49 AF-Point Zoom........................... 78 Auto Category ..........................100 AUTO Mode ............................... 15 Auto Rotate ..............................139 Date Battery............................. 173 Date Stamp............................
186 Index H N High-Power Flash ....................171 Histogram................................... 48 Night Display ............................. 54 I Index Playback.........................104 Indicators ................................... 43 ISO Speed .................................65 J Jump (Searching the Images)..107 L LCD Monitor Display ..................53 Lens Retract...............................52 List of Messages ......................154 M Macro .....................................
Index Slide Shows .............................114 Sound Memos..........................122 Start-up Image ........................... 51 System Map ............................... 34 T Telephoto ................................... 55 Transfer Settings (DPOF) ........130 Transition .................................113 TV Set ......................................141 V Video Output Signal .................141 Viewfinder .................................. 41 Volume.......................................
188 Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
Functions Available in Each Shooting Mode 189 Functions Available in Each Shooting Mode Some functions may not be available, depending on the shooting mode. Check the functions available for each shooting mode in the table below. Shooting Mode Long Shutter Function Exposure Compensation (p. 90) Long Shutter Mode (p. 92) Auto1) ISO Speed (p. 65) High ISO Auto ISO 80 – 1600 White Balance (p. 94) Auto1) Other than Auto Single Shot Drive Mode (pp. 61, 75) Continuous Self-timer 2 sec./10 sec.
190 { – { – – { – { { { { – { – – { { – – – – – – { { { { { { { { { Functions Available in Each Shooting Mode { – { – – { – { { { { – { – – { { – – – – – – – – { { { { { { { { – { – – { – { { { { – { – – { { – – – – – – { { { { { { { { { { – { – – { – { { { { – { – – { { – – – – – – { – { { { { { { { { – { – – { – { { { { – { – – { { – – – – – – { { { { { { { { { { – { – – { – { { { { – { – – { { – – – – – – { – { { { { { { { { – { – – { – { { { { – { – – { { – – – – – – { { { { { { { { { { – { – –
Functions Available in Each Shooting Mode 191 Shooting Mode Long Shutter Function Face Detect AF Frame (p. 82) AiAF (9-point) Center AF-Point Zoom (p. 78) Digital Zoom4) (p. 55) Standard Digital Tele-converter Slow Synchro Flash Settings (p. 76) Red-Eye Correction Red-Eye Lamp Custom Timer (delay, shots) (p. 61) AF-assist Beam (p. 49) Review (Rec. review) (p. 49) Review Info. (p. 16) Off Detailed/Focus Check Auto Category (p. 100) Disp. Overlay (p.
192 { { { { { { – { { { { { { { { { { { Functions Available in Each Shooting Mode { { { { { { {5) { { { { { { { { { { { { { { { { { {5) { { { { { { { { { { { { { { { { { – { { { { { { { { { { { { { { { { { – { { { { { { { { { { { { { { { { { {5) { { { { { { { { { { { { { { { { { {5) { { { { { { { { { { { { { { { { { – { { { { { { { { { { { { { { { { { – { { { { { { { { { { { { { { { { { – { { { { { { { { { { { – – { { { { – – – { – { { { { { { { { { { { { { – { { { {7) { { { { { { { – { – – {
CEL-SH6DA210 © CANON INC.
