ZoomBrowser EX Software User Guide
Table of Contents (1/2) Chapter 1 Try It! ZoomBrowser EX Starting ZoomBrowser EX ........................................................ 4 Downloading Images to a Computer ....................................... 8 Printing Images ....................................................................... 12 Supplementary Information .................................................... 18 Chapter 2 What is ZoomBrowser EX? What Can ZoomBrowser EX Do? .............................................
Table of Contents (2/2) Chapter 6 Using Supplementary Features Sending Images by E-mail ........................................................ 76 Adding Computer Images to the Camera ................................ 78 Exporting Images .................................................................... 80 Running a Slide Show .............................................................. 82 Adding Sounds to Images ........................................................
Chapter 1 Try It! ZoomBrowser EX Starting ZoomBrowser EX (1/4) This chapter covers the ZoomBrowser EX basics, such as starting the program, downloading images from the camera and printing them. It begins with the procedures for starting the program.
Chapter 1 Try It! ZoomBrowser EX Starting ZoomBrowser EX (2/4) Starting by Connecting the Camera to the Computer Your camera model name or “Canon Camera” will appear here. You can start ZoomBrowser EX with this method by attaching the camera to the computer and preparing it to transfer data. Set the following Auto Start Settings the first time (only) that you connect the camera to a computer. If you have already set them, proceed to the steps on the next page.
Chapter 1 Try It! ZoomBrowser EX Starting ZoomBrowser EX (3/4) ■ Procedures for Subsequent Connections to a Computer 1. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • With some versions of Windows, you may not be able to use this method of starting ZoomBrowser EX the very first time the camera is connected to the computer after it is booted up.
Chapter 1 Try It! ZoomBrowser EX Starting ZoomBrowser EX (4/4) ■ The Menu Method Starting by Clicking an Icon or Menu Use the following methods to start ZoomBrowser EX using its desktop icon or a menu. ■ The Icon Method 1. 1. Click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [ZoomBrowser EX] and [ZoomBrowser EX]. ZoomBrowser EX will start and open its main window. Double-click the [ZoomBrowser EX] icon on the desktop.
Chapter 1 Try It! ZoomBrowser EX Downloading Images to a Computer (1/4) This section describes two methods for downloading images shot with a camera to a computer. ■ Downloading Images with Computer Commands Proceed to Step 2 if ZoomBrowser EX’s main window displays. 2. Click [Camera & Memory Card]. This method uses commands entered on the computer to download images from a memory card in a camera or in a memory card reader.
Chapter 1 Try It! ZoomBrowser EX Downloading Images to a Computer (2/4) REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • A dialog will appear if multiple memory card readers are connected and loaded with memory cards, or if a camera and a memory card are connected concurrently, to allow you to select which images are shown from which device.
Chapter 1 Try It! ZoomBrowser EX Downloading Images to a Computer (3/4) Using Camera Commands to Download Images You can download images using camera commands if your camera supports the direct transfer function (camera has a Print/Share button ). 1. 10 Read the dialog that displays. If a dialog similar to the one below appears, proceed to Step 2. The Print/Share button will light up at this point and a direct transfer menu like the one shown at the lower right will appear in the camera’s LCD monitor.
Chapter 1 Try It! ZoomBrowser EX 2. Downloading Images to a Computer (4/4) The image transfer will commence after you set the direct transfer setting on the camera. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • See the Camera User Guide for the settings and procedures related to the Direct Transfer menu shown on the camera’s LCD monitor.
Chapter 1 Try It! ZoomBrowser EX Printing Images (1/6) You will use the PhotoRecord printing utility to print. 3. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Select the images you wish to print and click [Next]. The background of the selected images will turn orange. ○ • Images recorded in the Adobe RGB color space will appear unsaturated when printed using PhotoRecord.
Chapter 1 Try It! ZoomBrowser EX 4. Printing Images (2/6) Place a check mark in the boxes of the data you wish to include with the print (multiple selections are possible) and click [Finish]. To operate PhotoRecord, follow the procedures displayed at the window’s left. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • See Viewing Image Properties in Chapter 4 to learn how to append comments to images.
Chapter 1 Try It! ZoomBrowser EX 5. Printing Images (3/6) Click [2 Select Printer & Album Type] and select a printer and an album type. Select a printer REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Select among the following album types. (The displayed album types may vary according to the printer in use.) • One Photo Per Page/One Photo Per Sheet Prints one image on each sheet of paper.
Chapter 1 Try It! ZoomBrowser EX 6. Printing Images (4/6) 7. Click [3 Select Paper] and choose the media type, paper size and paper orientation. Click [Decorate Album] and change the image background, frame and other design elements as desired.
Chapter 1 Try It! ZoomBrowser EX 8. Printing Images (5/6) Click [Add Titles & Captions] and change or add titles and text as desired. To add new text, click the target page and input the text. Select the page Click on text that is already displayed to change it. Select the text. Input the text REFERENCE Edit it here.
Chapter 1 Try It! ZoomBrowser EX 9. Printing Images (6/6) Change the size and rotation angle of the image, text or clip art as desired. [4 Print], confirm the number of copies and 10. Click other print settings and click [Print]. The following operations can be performed in the album window. ■ Move Items You can move images, text or clip art by dragging them. ■ Change Size or Rotation Angle You can change the size or rotation angle of images, text or clip art by dragging the following points on them.
Chapter 1 Try It! ZoomBrowser EX Supplementary Information In this section, we explain information that you should know to use ZoomBrowser EX. If You Have a Problem ZoomBrowser EX comes with a Help file. Use it when you want to learn how to do an operation, or when you want to know about the features of the program. You can access Help from the [Help] menu or the [?] (Help) button. Help menu Help button Exiting ZoomBrowser EX You can exit ZoomBrowser EX by clicking (Close button) on the Browser Window.
Chapter 2 What is ZoomBrowser EX? What Can ZoomBrowser EX Do? (1/2) This chapter explains the basic skills required to master ZoomBrowser EX. Let’s begin with an overview of the main features. Connect the camera to your computer to: • Download images from the camera to your computer in an easy procedure. • View an index of the images from the camera on the computer monitor. • View information (shooting date and camera settings) about images stored in the camera.
Chapter 2 What is ZoomBrowser EX? What Can ZoomBrowser EX Do? (2/2) By using other programs: ZoomBrowser EX gives you additional power when you use it together with the following applications. (You can start these applications from within ZoomBrowser EX.) ■ PhotoRecord • You can use this program to create and print beautiful layouts consisting of multiple images. • You can select frames and backgrounds with a variety of designs. • You can add text to images or pages.
Chapter 2 What is ZoomBrowser EX? Finding Images and Folders (1/2) It is important to understand how folders are used in ZoomBrowser EX to store images. Where Are Images Stored? The images that you downloaded in Chapter 1, Downloading Images to a Computer, should be contained in the My Pictures folder. As you will note, the folders mentioned above also appear at the right of the ZoomBrowser EX window.
Chapter 2 What is ZoomBrowser EX? Finding Images and Folders (2/2) Folders in the Browsing Area and Folder Area Folders within Folders Image thumbnails (tiny versions) are shown in the right-hand side of the ZoomBrowser EX window. This area is called the Browsing Area. The area in the middle, called the Folder Area, shows the folder directory much as it is shown in Windows Explorer.
Chapter 2 What is ZoomBrowser EX? Main Window (1/5) This window is designed for managing images downloaded to the computer. It can also be used for various functions, such as printing and sending images by e-mail. Main Window Components Switching to the Camera Window To switch to the Camera Window, click the [Camera & Memory Card] task button, followed by [Browse & Download Images] in the next menu.
Chapter 2 What is ZoomBrowser EX? Main Window (2/5) Task Area and Task Buttons The Task Area contains the four task buttons: Camera & Memory Card, Print, View & Modify and Internet. Click one of these buttons to perform the related task. ■ Camera & Memory Card Click this to open the Camera Window or perform remote shooting. ■ Print Click this to print images. ■ View & Modify Click this to display images in a slide show or edit them. ■ Internet Click this to attach images to e-mail messages.
Chapter 2 What is ZoomBrowser EX? Main Window (3/5) Using the Task Windows ■ Gray Buttons Tasks that are selectable at the time are colored gray. The button turns dark gray when the mouse cursor is placed over it. You can switch between tasks by clicking another task button. However, if you have already finished selecting an image and you switch to the [Select Captions for Printing] task, you must click [Select Images] again to reselect the image.
Chapter 2 What is ZoomBrowser EX? Main Window (4/5) Function Buttons The following buttons are available in the main window. Zoom-In Button (zoom mode only) Zooms in on images or folders in the Browser Area. Zoom-Out Button (zoom mode only) View Mode Button Zooms out from images or folders in the Browser Area. Switches between the scroll mode, zoom mode and preview mode according to the context. Up Button Advances one step up from a lower level folder.
Chapter 2 What is ZoomBrowser EX? Main Window (5/5) Changing the Display ■ Hiding the Folder Area Click the button in the upper right of the Folder Area to hide it and make the Browsing Area larger. Click the button to redisplay the Folder Area. You can hide the Task Area and Folder Area to make the Browsing Area larger. ■ Hiding the Task Area Click the button in the upper right of the Task Area to hide it and make the Browsing Area larger. Click the button to redisplay the Task Area.
Chapter 2 What is ZoomBrowser EX? Camera Window (1/2) The Camera Window is used to view images contained in the camera (memory card) and to select and download images to a computer. Task Area and Task Buttons REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Images recorded in the Adobe RGB color space will appear unsaturated when displayed in ZoomBrowser EX.
Chapter 2 What is ZoomBrowser EX? Camera Window (2/2) REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • To switch from one task to another, click the appropriate icon ○ Deselect Button Deselects a selected image. at the right of the task button. Rotate Button Function Buttons Rotates the selected image. Choose between 90º left, 90º right or 180º. The following buttons are available in the Camera Window.
Chapter 2 What is ZoomBrowser EX? Using the Right-Click in Operations With ZoomBrowser EX you can access many useful functions by using the right mouse button (right-click). For example, if you right-click a thumbnail, the following shortcut menu appears. Right-click anywhere on the image to display a shortcut menu. A shortcut menu is a convenient collection of the most common window buttons and menu commands that apply to a given situation.
Chapter 3 Viewing Images Selecting Folders - Folder Area This chapter explains how to view and edit images in ZoomBrowser EX. In this section, you will learn how to use the Folder Area to select folders with images that you wish to view. Collapsing and expanding a folder If a folder contains subfolders, you can use the and buttons to collapse or expand the folder. When you click the button to collapse the folder, its subfolders are hidden.
Chapter 3 Viewing Images Selecting Folders - Browsing Area (1/5) This section explains how to use the Browsing Area to open folders and search and view images. ■ Zoom Mode Zoom mode displays all the images in subfolders as well as the selected image folder. Selecting a Display Mode The Browsing Area features three display modes: the scroll mode, zoom mode and preview mode. The zoom mode is the default mode. To switch between modes, click (View Mode) and choose an option from the menu that appears.
Chapter 3 Viewing Images Selecting Folders - Browsing Area (2/5) ■ Scroll Mode ■ Preview Mode Scroll mode only displays the images in the selected image folder to show them at a larger size. A scroll bar will appear on the right side of the Browsing Area if all the images do not fit at once. If the image folder contains subfolders, only their icons display. This mode displays one image at a large size and information about the image. Select the image to preview from the bottom of the Browsing Area.
Chapter 3 Viewing Images Selecting Folders - Browsing Area (3/5) ■ Scroll Mode Selecting Folders In the Browsing Area, double-click the icon of a displayed folder to view its images and subfolders. ■ Zoom Mode In the Browsing Area, double-click an area where there is no image inside the folder you wish to see. The contents of the folder are displayed in the Browsing Area. If a folder icon is not shown on the screen, click the scroll bar to display it. Double-click a folder to view its contents.
Chapter 3 Viewing Images Selecting Folders - Browsing Area (4/5) Returning to a higher level in the folder hierarchy ■ Preview Mode At the bottom of the Browsing Area, double-click the icon of a displayed folder to open it and view its images and subfolders. When you are deep in the folder hierarchy, you can use the (Up) button to go back to a higher level. The example below shows the zoom mode, but the procedure is the same for the other display modes.
Chapter 3 Viewing Images Selecting Folders - Browsing Area (5/5) In Zoom mode, you can do this ■ Right-Clicking to Zoom In or Out There are more convenient ways to use the Zoom mode. ■ Zooming in by skipping levels You can zoom in directly on a subfolder displayed in the Browsing Area without going through each successive level by doubleclicking within the folder (on a point containing no images). Right-click on any clear area in the Browsing Area to display a menu like that below.
Chapter 3 Viewing Images Opening Images This section explains how to open images displayed in the Browsing Area. REFERENCE ○ How to open an image In the Browsing Area, double-click the image that you want to open. The image appears in a new window. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • After selecting an image, you can click (View Image) to open the image.
Chapter 3 Viewing Images Zooming This section explains how to zoom an image. How to select a zoom ratio Click the at the bottom of the window to open a submenu and click an option to change the display to that zoom ratio. Scaling to the window size You can scale the image to fit the window size. From the zoom ratio list, click [Scale to Fit]. The image is adjusted to the size of the window. The mouse cursor changes to an arrow when you place it here.
Chapter 3 Viewing Images Editing Images (1/4) This section explains how to edit an open image. Edit Panel Features Using the edit panel, you can perform the following editing operations. ■ Crop An edit panel for revising images displays beneath images that have been opened. Crop the image, cutting out parts that are not needed. ■ Color, Brightness, Contrast Change the image appearance by adjusting color density, brightness, and contrast. ■ Undo, Redo Undo or redo the previous editing operation.
Chapter 3 Viewing Images Editing Images (2/4) REFERENCE ■ Crop ○ Use this function to extract only part of an image, leaving out unneeded portions. Place the mouse pointer within the image you want to crop. Click and drag to form a rectangular frame. Then, click (Crop) to extract the area within the frame.
Chapter 3 Viewing Images Editing Images (3/4) Color, Brightness and Contrast REFERENCE ○ You can adjust the color (saturation), brightness or contrast by dragging the respective slider in the edit panel. 41 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • You can adjust the color (saturation), brightness and contrast by entering a value in the box beside the slider and pressing the [Tab] or [Enter] key.
Chapter 3 Viewing Images Editing Images (4/4) Undo, Redo Overwriting the original image After you edit an image, the result may not satisfy you and you may want to go back to the previous step. In this case, click (Undo) to cancel the operation and return to the previous step. Keep clicking (Undo) to continue going back. If you feel that you have undone too many steps, you can reverse it by clicking (Redo).
Chapter 3 Viewing Images Editing Images with Other Programs This section explains how to edit an image selected in ZoomBrowser EX using another image editing program that has been registered with ZoomBrowser EX. How to edit an image with other programs Click [View & Modify] in the main window, followed by [Edit Image] in the next menu. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ A Select an image.
Chapter 4 Organizing Images Creating Folders This chapter explains how to manage images effectively with ZoomBrowser EX. It starts with the method for creating a new folder within an existing one. Creating Folders 1. Select a folder in the Folder Area. 2 Click the [File] menu and select [New Folder]. 44 You will be creating a new folder within the folder selected here. ZoomBrowser EX Software User Guide 3. Type a name for the new folder and click [OK]. You have created a new folder.
Chapter 4 Organizing Images Selecting Images Selecting All the Images This section explains how to select images in the Browsing Area. Selecting a Single Image Click (Select All) at the top of the Browsing Area to select all the images in a single step. You can also click the [Edit] menu and choose [Select All]. Click on an image to select it. The background color of the selected image(s) will change to orange.
Chapter 4 Organizing Images Moving or Copying Images (1/4) This section explains how to move or copy images between folders. It is convenient to conduct these procedures in the zoom mode. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Moving or copying images in ZoomBrowser EX affects the actual location in which those images are stored on your PC.
Chapter 4 Organizing Images Moving or Copying Images (2/4) Copying an image within the Browsing Area To copy an image, before you drop the image you are dragging, press and hold the [Ctrl] key and release the mouse button, while still holding the key. A Drag the image you want to copy. 47 ZoomBrowser EX Software User Guide B While holding down the [Ctrl] key, drop it at the desired location.
Chapter 4 Organizing Images Moving or Copying Images (3/4) Moving or Copying an Image from the Browsing Area to the Folder Area Copying by Dragging a File Icon from a Windows Window You can also copy an image by dragging its file icon from an open Windows window and dropping it onto the ZoomBrowser EX window. You can move or copy images between different folders by dragging them from the Browsing Area to the Folder Area and dropping them in the target folder. A Drag the image you wish to move.
Chapter 4 Organizing Images Moving or Copying Images (4/4) Additional ways of moving or copying images ■ Moving or copying many images at once You can select several images by clicking them in succession. You can also select a series of adjoining images in one step by holding down the [Shift] key while you click the first and last images. Once the images are selected, you can move or copy them all together with standard drag and drop procedures.
Chapter 4 Organizing Images Deleting Images (1/2) This section explains how to delete images that you no longer need. Click [Yes] when a confirmation dialog like the one below appears. How to delete an image Click the image you want to delete, and click (Delete).
Chapter 4 Organizing Images Deleting Images (2/2) Other ways of deleting images ■ Deleting multiple images You can select several images by clicking them in succession or by holding down the [Shift] key while you click the first and last images in a series. When you have selected all the images that you want to delete, clicking deletes all of the selected images at once. ■ Deleting images from the File menu Click an image. Then, click [Delete] on the [File] menu to delete the image.
Chapter 4 Organizing Images Rotating Images This section explains how to rotate images to the desired orientation. This is useful for images taken by holding the camera sideways. REFERENCE ○ IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • By the default setting, rotating an image in ZoomBrowser EX changes (rotates) the image in the file on your PC.
Chapter 4 Organizing Images Renaming Images A dialog similar to that below will appear. This section explains how to rename images. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Renaming an image in ZoomBrowser EX renames the actual file on your PC.
Chapter 4 Organizing Images Sorting Images This section explains the procedures for changing the image order. Sorting Images To change the image order in the Browsing Area, click the [View] menu, select [Arrange] and then one of the sorting options. ■ By Name Sorts images in alphabetical order by the file name. ■ By Type Sorts images in alphabetical order by the file type. ■ By Date Sorts images in order from the oldest modification date to the newest. Click [Arrange] and select a menu item.
Chapter 4 Organizing Images Searching Images (1/3) This section explains how to perform searches on images. 3. Set the search parameters. Searching Images Sets whether images are searched according to all the parameters or just one You can search for images marked as Favorites or search by such parameters as the modification date, shooting date or keywords. The procedures for marking images as Favorites or adding keywords to them are explained in the following pages. 1.
Chapter 4 Organizing Images 5. Searching Images (2/3) If the search results are satisfactory, click [Finish]. If you wish to modify the search parameters, click [Previous] and repeat steps 3–4. Adding Keys for Image Searches ■ Adding the Favorites Symbol to Images It is easier to find your favorite images if you mark them with a Favorites symbol. The Favorites symbol is shown below. Images satisfying the search parameters This concludes the search process.
Chapter 4 Organizing Images Searching Images (3/3) Adding Keywords to Images Managing Keywords Add keywords to images for use in searches. 1. 2. Select the image in the Browsing Area. The following window displays when you click the [Tool] menu and select [Manage keywords]. Click (Properties) and [View/Modify keywords] in the next window. Instead, you can also click the [Tool] menu and select [View/ Modify keywords]. A window for setting keywords will display. 3.
Chapter 4 Organizing Images Refreshing Folders This section explains how to refresh or update a folder. What Does It Mean to Refresh a Folder Refreshing Folders Click the [View] menu and select [Refresh Current Folder]. This will update ZoomBrowser EX’s information about all the folders. Adding, moving, copying or editing an image or a folder within ZoomBrowser EX ensures that it is updated and appears correctly in the Browsing Area.
Chapter 4 Organizing Images Deleting Folders This section explains the procedures for deleting folders. Click [Yes] in the confirmation dialog to proceed. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • When you delete a folder, all the actual images and folders it contains are deleted too. Deleting Folders Select a folder to delete and click (Delete).
Chapter 4 Organizing Images Renaming Folders This section explains the procedures for renaming folders. A dialog similar to that below will appear. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • When you use ZoomBrowser EX to change a folder name, the name of the folder on the computer disk also changes to that name. Renaming Folders Select a folder to rename, click the [File] menu and select [Rename].
Chapter 4 Organizing Images Finding Folder Locations This section explains methods for finding out which disks and folders contain your image folders. A window similar to that below will appear. You can check the location of the saved folder by looking at the categories below. Viewing Folder Properties Select the folder and click (Properties). Click the (Close button) to close the window once you have checked it.
Chapter 4 Organizing Images Viewing Image Properties (1/2) This procedure is for viewing various information about the selected image. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • When an image taken by the camera is modified and saved by another program, information about the camera settings might be lost. Viewing Image Properties Select the image in the Browsing Area and click to open the Properties window.
Chapter 4 Organizing Images Viewing Image Properties (2/2) Alternative Method You can view the properties of an image by clicking the (View Mode) menu, selecting [Preview Mode] in the next menu and selecting the image. You can check the file name, comments, histogram and detailed shooting mode settings in the image properties window. You can also change the file name and add comments to the image.
Chapter 5 Using the Camera Window Opening the Camera Window (1/2) This chapter explains how to use ZoomBrowser EX’s Camera Window. It starts with the procedures for opening the window. Connecting the Camera and Opening the Camera Window A dialog similar to the following one will appear when you connect the camera to a computer using an interface cable and prepare the camera to communicate. If you select [List Images], the Camera Window will display.
Chapter 5 Using the Camera Window Opening the Camera Window (2/2) A window like that below will open. Click [List Images] to open the Camera Window. Using the Task Buttons to Open the Camera Window IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Ensure that the camera and computer are connected with an interface cable and are ready to communicate before you perform this procedure.
Chapter 5 Using the Camera Window Downloading Images (1/3) This section explains the procedures for downloading images from a camera (memory card) to a computer disk. Specifying the Image File Destination Specify the location to which your image files are downloaded on the computer. Downloading Images Select the image(s) and click [Download image]. Select the image(s). Specify the folder to which images are saved.
Chapter 5 Using the Camera Window Downloading Images (2/3) REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Alternative Method • The My Pictures folder is set as the default destination. Click [OK] to start downloading. When the download is complete, the Camera Window will close and the main window will open.
Chapter 5 Using the Camera Window Downloading Images (3/3) • Select Send mark Selects only the images that have been marked with transfer order settings by the camera. • If an image is taken in the RAW mode (some camera models do not come with this feature), it appears in the Camera Window as follows: • Select Slide Show mark Selects only the images that have been marked with slide show settings by the camera.
Chapter 5 Using the Camera Window Deleting Images in the Camera Other ways of deleting images This section describes how to delete images from the camera (memory card). ■ Deleting multiple images IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Please note that deleting an image in the Camera Window deletes the actual image from the memory card.
Chapter 5 Using the Camera Window Rotating Images in the Camera This section explains how to rotate the display of images stored in the camera to the desired orientation. How to rotate an image In the Camera Window, select the image you want to rotate. Click (Rotate) to display a menu. On the menu, click the rotation angle that you want to use. A Select an image.
Chapter 5 Using the Camera Window Adding Computer Images to the Camera (1/2) This section explains the procedures for copying images from the computer disk to the camera (memory card). A dialog box appears. In the dialog box, select an image you want to copy to the camera and click [Open]. How to copy an image to the camera REFERENCE Click (Set) and select [Add Image(s)] from the next menu.
Chapter 5 Using the Camera Window Adding Computer Images to the Camera (2/2) REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • You can select the [Add image as is] option only when uploading JPEG images based on the DCF standard. Select [Add image after adjusting size] for all other images. • JPEG format images can be uploaded to the camera.
Chapter 5 Using the Camera Window Using the Task Buttons (1/2) This section explains the tasks that can be performed with the task buttons that weren’t mentioned in the downloading topic. Task Buttons Select a task from the four buttons available. Download Destination Dialog When you select an image in the Camera Window and click a task button, a dialog like the one below will appear. Specify the destination folder to proceed with the next part of the task.
Chapter 5 Using the Camera Window Using the Task Buttons (2/2) Selectable Tasks The procedures after a download destination has been specified are the same as below. ■ Download Image These procedures are explained in Downloading Images in this chapter. ■ Print • Layout Print • Contact Sheet Print This procedure is described in Printing Images in Chapter 1. ■ View as Slideshow • These procedures are explained in Running a Slide Show in Chapter 6.
Chapter 5 Using the Camera Window Other Functions of the Camera Window This section explains the additional functions of the Camera Window that you can use. Click here to deselect images. Click this button to check Image Properties information. You can reconnect the camera after its connection to the computer has been interrupted by selecting [Reconnect] from the [Set] menu.
Chapter 6 Using Supplementary Features Sending Images by E-mail (1/2) This chapter explains how you can use images stored in ZoomBrowser EX in various situations. First, let’s begin with how you can send images in e-mail. 4. Use this option if you do not want to change the size of the image. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • To use this function, your e-mail program must be set up as a MAPI client.
Chapter 6 Using Supplementary Features 5. 6. Sending Images by E-mail (2/2) 7. Click [Next]. Select whether to create an e-mail message or save the images. Click [Finish]. • If You Selected [Create a new email]: Your e-mail program will start and the selected images will appear as an attachment in the message window. Input the address, subject and your comments and send the message. Start the e-mail program and send the e-mail immediately.
Chapter 6 Using Supplementary Features Adding Computer Images to the Camera (1/2) This section explains the procedures for copying images from the computer’s disks to the camera (memory card). IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Ensure that the camera and computer are connected with an interface cable and are ready to communicate before you perform this procedure.
Chapter 6 Using Supplementary Features Adding Computer Images to the Camera (2/2) REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • You can select the [Send image as is] option only when uploading JPEG images based on the DCF standard. Select [Add image after adjusting size] for all other images. • JPEG format images can be uploaded to the camera.
Chapter 6 Using Supplementary Features Exporting Images (1/2) This section explains how to change the size, resolution or file format of a selected image and write it to a new file, and to export an image for use as a screen saver or wallpaper. It also describes how to export the shooting information to a text file. Export Formats The following types of image export formats are available. Exporting Images 1. 2. 3. Click [View & Modify] in the main window. 4. Select an export option and click [Next].
Chapter 6 Using Supplementary Features 5. Exporting Images (2/2) Setting the Export Settings The contents of the export settings vary according to the selected export format. Adjust the settings according to the displayed information. Be sure, however, to note the file name and destination when exporting so that you do not lose track of the exported file. Destination folder 81 ZoomBrowser EX Software User Guide 6. Click [Finish]. This will export the image(s).
Chapter 6 Using Supplementary Features Running a Slide Show (1/2) This section explains how to run a slide show displaying images in sequence in the full-screen mode. 4. Set the display settings for the slide show and click [Finish]. Setting and Starting a Slide Show 1. 2. 3. Click [View & Modify] in the main window. Click [View as a Slide Show] in the next menu. In the Browsing Area, select images and click [Next].
Chapter 6 Using Supplementary Features Running a Slide Show (2/2) The slide show starts. While running a slide show, you can use the control buttons at the bottom right of the window to control the show. Click this button to return to the previous image. Click this button to move to the next image. Click here to pause the show (Click again to resume play) Click here to end the slide show Click this button if you see an image you would like to print during a slide show.
Chapter 6 Using Supplementary Features Adding Sounds to Images The following mark appears when an image is accompanied by a sound. You can add sounds to your images and play them later as necessary. REFERENCE ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This mark indicates an image with a sound.
Chapter 6 Using Supplementary Features Checking and Changing Camera Settings You can check camera settings from the computer. This will display a window like the following. You can check or change each setting in this window. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Type the name of the owner of the camera here.
Chapter 6 Using Supplementary Features Saving the “My Camera Settings” to the Camera (1/7) This section explains how to save the “My Camera Settings” on your computer to the camera or vice versa. The My Camera window displays. Switches between theme sets and individual settings. What are the My Camera Settings? Changes the type of data.
Chapter 6 Using Supplementary Features Saving the “My Camera Settings” to the Camera (2/7) Saving the My Camera settings to the camera You can save the files that appear in this list as My Camera Settings to your camera. This topic explains how to save the previously recorded My Camera Settings files to the camera.
Chapter 6 Using Supplementary Features 2. Saving the “My Camera Settings” to the Camera (3/7) In the My Computer list, select a setting you would like to add to the camera. When you select [Setup as a theme]: The start-up image will preview in the area to the right and the start-up sound, the shutter sound, the operation sound and the self-timer sound will play in order. When you select [Set individually]: When you select a start-up image, it will be displayed in the preview area to the right.
Chapter 6 Using Supplementary Features 4. Saving the “My Camera Settings” to the Camera (4/7) Adding New Files to the My Camera Settings Click the [Close] button to close the dialog. This concludes the procedure for adding settings to the camera. Next, you will have to change the settings on the camera itself to use the new start-up image and sounds. See the guide supplied with your camera for instructions for changing the settings.
Chapter 6 Using Supplementary Features Saving the “My Camera Settings” to the Camera (5/7) ■ Adding the new file as My Camera Settings to the computer Create the new files before adding them Start by creating the image file or sound file that will be used as a My Camera Settings file and save it to the computer. Once you have created the settings file and saved it to the computer, use the following procedures to add it to the My Camera window.
Chapter 6 Using Supplementary Features 3. Saving the “My Camera Settings” to the Camera (6/7) In the Open dialog, select the file you created and click [Open]. The selected file will appear in the Computer list. This concludes the process for adding the new settings. You can save the newly created settings to the camera using the procedures described in the Saving the My Camera Settings to the Camera section.
Chapter 6 Using Supplementary Features Saving the “My Camera Settings” to the Camera (7/7) Saving the Settings to the Computer You can copy the My Camera Settings from the camera to the computer. 1. 3. Click [Save to PC]. 4. Assign a name to the settings file and click [OK]. Click the [Setup as a theme] tab in the My Camera window.
Chapter 6 Using Supplementary Features Creating a My Camera Sound (1/2) Creating a My Camera Sound Recording and Editing Sounds The following section introduces the [My Camera Sound Maker] function, which allows you to record and edit the start-up sound, shutter sound, operation sound and self-timer sound. Use these tabs to switch between sound files for recording and editing. Click here to record sounds. Ends the recording. Displays the Help menu. Click here to open sound files.
Chapter 6 Using Supplementary Features Creating a My Camera Sound (2/2) IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • The “Sound time” will display in red if the sound file exceeds the time limit. If this happens, select the desired sound portion using the blue and red switches and select [Cuts both switches, before blue and after red] from the [cut] menu to delete unnecessary sound portions.
Chapter 6 Using Supplementary Features Playing Movies ZoomBrowser EX supports movies. When you connect a camera with movie files on it to the computer and open the Camera Window, a thumbnail of the first image of each movie file will display with a movie camera symbol on it. You can import movie files in the Browsing Area the same way you do images. In this case, a thumbnail and a movie mark appear in the Browsing Area. When you double-click the thumbnail, QuickTime Player starts and plays the movie.
Chapter 6 Using Supplementary Features Editing Movies (1/4) You can create movies by adding various effects: linking movies and still images that have been downloaded to a computer, superimposing titles and other text, and adding background music.
Chapter 6 Using Supplementary Features Editing Movies (2/4) Features of the Storyboard Area Changes the order of the selected images Displays the properties of the selected image Click this button to play the movie being edited Transition Box Displays the icon of the transition effect used to link adjacent images 97 ZoomBrowser EX Software User Guide Displays a dialog with the general movie editing settings Deletes the selected image from the storyboard area
Chapter 6 Using Supplementary Features Editing Movies (3/4) Features of the Arrange Window Moves the image selected in the storyboard area one position to the left or right Features of the Apply Effect Window Superimposes titles and other text on the image selected in the storyboard area You can set the font, display duration, display position and scrolling attributes of the text You can change the image selected in the storyboard area into a sepia or monochrome image, or add noise for a film simulation
Chapter 6 Using Supplementary Features Editing Movies (4/4) Features of the Set Audio Window You can link MP3-format and WAV-format audio files as background music or sound effects When you link a sound file using this procedure, a bar appears under the thumbnail in the storyboard area indicating the duration of the audio file Features of the Save Window Specifies the file name Selects the destination folder You can adjust the volume or set the fade-in or fade-out effect for a movie or its linked audio
Chapter 6 Using Supplementary Features Exporting Movies (1/2) This feature changes a movie to another file format or size and exports it. Features of the Select the Save Format Window Procedures for Exporting Movies 1. Click [View & Modify] in the main window, followed by [Export Movies]. 2. Select a movie in the Browser Area and click [Next]. 3. Follow the steps at the window’s left-hand side to proceed. Finish by exporting (saving) the movie.
Chapter 6 Using Supplementary Features Exporting Movies (2/2) Features of the Set the Save Format Window To change the size of the movie being exported, select [Zoom specification] or [Size specification] and set the size Selects the number of frames displayed each second 101 ZoomBrowser EX Software User Guide Sets the image quality.
Chapter 6 Using Supplementary Features Converting RAW Images (1/5) If your camera supports RAW images you can handle higher quality images. However, the RAW format is a special file format and RAW images cannot be opened or processed in their native format in standard image processing programs. RAW images must first be converted to standard file formats, such as TIFF or JPEG formats. This section explains conversion procedures. Converting RAW Images 1. 2. Select a RAW image in the Browser Area.
Chapter 6 Using Supplementary Features Converting RAW Images (2/5) ■ Image Quality Adjustment Window ■ Main Window The conversion is conducted in this window.
Chapter 6 Using Supplementary Features Converting RAW Images (3/5) 3. Adjust the image quality as required in the Image Quality Adjustment Window. 4. Click the [2. Save] tab in the main window, set the file format and save destination, and then click [Save]. Selects images that will be saved with the same settings (All images, or images marked with a check in the main window) Selects the image file format Sets the destination folder for the image file You can change the image file name 5.
Chapter 6 Using Supplementary Features Converting RAW Images (4/5) Features of the Image Quality Adjustment Window The adjustable categories may vary according to your camera model. Scrolling Tab Titles Click the arrows to display the other tab titles. Click a tab title to change tabs and access the other settings Adjusts the white balance by the light source or color temperature, etc.
Chapter 6 Using Supplementary Features Converting RAW Images (5/5) 4. Registering Custom Color Schemes (My Color) If you register a custom color scheme as a “My Color” scheme, you can apply this scheme easily to additional images when you convert RAW images. The program will calculate the differences between the original and target images, apply those corrections to the original image and display the results as the Preview My Color Applied to the Image.
Chapter 6 Using Supplementary Features Operating the Camera Shutter from the Computer (1/4) This section explains the procedures for remote shooting, the process of operating the camera shutter remotely from a connected computer. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • To confirm whether your camera supports remote shooting or not, check the guides that accompanied the camera.
Chapter 6 Using Supplementary Features Operating the Camera Shutter from the Computer (2/4) Features of the RemoteCapture Task Window Selects the image’s recording size and compression Sets the rotation setting of the image being recorded. This setting cannot be adjusted if your camera’s Auto Rotate function is set to On. Switches between showing and hiding the viewfinder and the detailed settings sections.
Chapter 6 Using Supplementary Features Operating the Camera Shutter from the Computer (3/4) ■ Saving and Recalling Shooting Settings Other Remote Shooting Features ■ Interval Timer Shooting Interval timer shooting is the method of capturing images in which a set number of frames is recorded at set intervals of time. Click the [Shooting] menu in the RemoteCapture Task window and select [Interval Timer Shooting] to open a confirmation dialog. Click [OK] to open a window like the one shown here.
Chapter 6 Using Supplementary Features Operating the Camera Shutter from the Computer (4/4) ■ Options Tab Remote Shooting Default Settings You can display the default settings for remote shooting by clicking the [File] menu in the RemoteCapture Task window and selecting [Preferences]. You can release the shutter using the key specified here ■ File Settings Tab Sets whether images are saved only to the computer, or also to the camera’s memory card Sets the root file name for saved images.
Chapter 6 Using Supplementary Features Stitching Panoramic Images - PhotoStitch If you have several images of the same scene with only slight differences, you can use PhotoStitch to connect the images together to make a panoramic image. This section explains how to use this program to stitch images. Then, follow the instructions on the upper part of the PhotoStitch window, and stitch your images together.
Chapter 6 Using Supplementary Features Saving Images to CD-R/RW Disks (Windows XP Only) Saving Images to CD-R/RW Disks You can copy or save images onto CD-R disks and CD-RW disks. The shooting information is saved along with the image. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 3. Click [View & Modify] in the ZoomBrowser EX main window and [Backup to CD] in the next menu. 4.
Appendices Supported File Formats The following is a list of file formats supported by ZoomBrowser EX. Readable files ZoomBrowser EX can read the following file formats. ■ JPEG files (.JPG) Most cameras use this file format. It compresses at very high ratios, taking advantage of the characteristics of the human eye.
Appendices Auto-Download Settings (1/3) You can set which downloading method is used after ZoomBrowser EX starts automatically when the camera is connected to the computer. You can also use this setting to specify the downloading process when the camera is connected to the computer after ZoomBrowser EX is already running, or when you click the [Camera & Memory Card] task button and select [Browse & Download Images]. 1. 2.
Appendices 3. Auto-Download Settings (2/3) Select the type of images to download and click [Next]. 4. Select the image destination and click [Next]. Specifies the folder to which images are saved Select this option to have the images saved into new folders created within the folder specified in the category above. Select from the options below for the naming conventions for the new folders. If you click either of these two options, only the images selected with the camera functions will download.
Appendices 5. Auto-Download Settings (3/3) Choose the action to be executed after images are downloaded and click [Finish]. After downloading, display the folder containing the images After downloading, you can have it continue to process images.
Customizing Preferences (1/3) Appendices General Tab ZoomBrowser EX provides a variety of preference settings that you can customize to make the program work the way you like. This section introduces some of the major preference settings you can change. Sets the thumbnail settings for the Browsing Area and the zoom options.
Customizing Preferences (2/3) Appendices Image Editor tab Selection Tab This tab selects the application program when a program other than ZoomBrowser EX is used to edit images. This tab sets the image selection methods and the image selection steps used with the task buttons. Sets the image selection method. Selects the program to start when you click the [View & Modify] menu in the main window and select [Edit Image].
Appendices Customizing Preferences (3/3) Rotate Tab This tab sets the rotation settings. Place a check mark here to have the original image rotated as well when a JPEG image is rotated in the Browsing Area. Only the rotated image is sent to the Browsing Area when you download an image that has been rotated in the Camera Window. Place a check here to have the original image left untouched and the rotation applied to a copy when a JPEG image is rotated.
Customizing Menus Appendices Click the [Tool] menu and select [Customize] to open a window like the one shown below. Use this window to set the categories to display and click [OK]. Sets whether options are shown or hidden on the menus opened by clicking task buttons in the main window. Remove the check mark from the menu items you wish to hide. Sets the categories displayed in this menu.
Setting up Slide Shows on the Camera Appendices If the camera comes with a slide show feature, you can use ZoomBrowser EX to edit slide shows. From the image list on the left, drag images to the right area and arrange their sequence for the slide show.
Print Settings (1/2) Appendices You can use ZoomBrowser EX to register print settings on a memory card, including the images to print and the number of copies. IMPORTANT ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • This feature does not work with unconverted RAW images. If you want to print RAW images, convert them first, copy them to the camera and perform this operation.
Print Settings (2/2) Appendices Standard printing Index printing The number under each image indicates the number of copies to print. Use the arrows next to the boxes to select the number of copies you want. The standard print icon displays when a number of copies is specified. To include images in an index print, select the check box under the image. Specify number of copies to print. The index print icon displays when a check mark is added to the image.
Appendices Troubleshooting (1/4) This section explains how to troubleshoot problems. The event dialog box does not appear In either case, confirm the status of each of the following items in order.
Troubleshooting (2/4) Appendices If You Were Using ZoomBrowser EX Version 2 or 3 ■ Check the Camera Status Confirm that the camera is on and in the correct mode to transfer data. Because the procedures for preparing the camera for communication differ among camera models, refer to the documentation that accompanied your camera for more information. ■ Images Were Assigned Titles or Comments Use the following procedures to display titles and comments previously input in ZoomBrowser EX Ver. 2/3. 1.
Appendices Troubleshooting (3/4) 3. Double-click the [dbconverter.exe] or [dbconverter] file in that folder. 4. Select the database file that was used with the previous version of the program and click [Start]. For example, select the following database file if it was used previously: [C: \Program Files\Canon\ZoomBrowser EX\Database\My Database.zbd]. 5. Click [OK] if the following dialog appears. 6. Click [Close] when the dialog in Step 4 appears.
Appendices Troubleshooting (4/4) ■ Image Files Were Saved Below the Program Files Folder in a Previous Version In ZoomBrowser EX 4, image files in folders within the Program Files folder will not display. To display these images, perform the procedures below after you have followed steps 1-6 on the previous page. 1.
Index A B 128 Index (1/3) View as Slideshow 28 View Image 26, 37 View Mode 26, 32 Zoom-In 26 Zoom-Out 26 Adding Computer Images to the Camera 71, 78 Adobe RGB color space 12, 23, 28 Auto-Download Settings 114 Brightness 41 Browsing Area 22, 23, 32 Selecting Folders 31 Buttons Browse & Download Images 8, 23 Camera & Memory Card 8, 23, 24, 65 Clear All 26 Close 18, 42 Connect to Internet 28 Delete 26, 29 Deselect 29 Download Image 28 Download image 66 Function Buttons 26, 29 Help 18, 29 Internet 24 Print
Index (2/3) Index I Images Adding Sounds 84 Adding to the Camera 71 Copying 47 Deleting 50 Deselecting 45 displaying 37 Downloading 8 Editing 39 Opening 37 Properties 62 Renaming 53 Rotating 52 Searching 55 Selecting 45 Sorting 54 Zooming 38 Index Print DPOF 122 J JPEG Format 113 K Keywords 57 129 ZoomBrowser EX Software User Guide M N O Main Window 23 Menu Customizing 120 Movies 68, 95 Editing 96 Exporting 100 Playing 95 Moving Images 46 My Camera Settings 86 Creating files 90 Saving to the Cam
Index (3/3) Index S 130 Save As 42 Saving Images CD-R/RW 112 Save As 42 Scroll Mode 33 Searching Images 55 Select All 45 Selecting Display Mode 32 Images 45 Set Button 29, 71 Shooting Information 62 Slide Shows Camera 121 Sorting Images 54 Sounds 84 File Length 90 Saving Sounds 94 Sound Memo 68 Standard Print 122, 123 Starting ZoomBrowser EX 4 Stitch Assist Mode 68, 111 ZoomBrowser EX Software User Guide T Task Area Camera Window 28 Main Window 23, 24 Using the Task Windows 25 Task Buttons Camera Win
ZoomBrowser EX Software User Guide Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
