Camera User Guide • Before use, be sure to read this guide, including the safety precautions. • This guide will familiarize you with how to use the camera correctly. • Keep the guide handy for future reference.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera dealer. Camera Interface Cable IFC-400PCU Getting Started Battery Pack NB-10L (with terminal cover) Neck Strap NS-DC9 DIGITAL CAMERA Solution Disk Battery Charger CB-2LC/CB-2LCE Lens Cap (with cord) Warranty System Booklet • A memory card is not included (see below).
Preliminary Notes and Legal Information About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
Part Names and Conventions in This Guide Front dial Lamp Lens Zoom lever Shooting: i (telephoto) / j (wide angle) Playback: k (magnify) / g (index) Strap mount Shutter button ON/OFF button/lamp Mode dial Exposure compensation dial Hot shoe (Pop up flash) switch Flash Speaker Ring release button DC coupler cable port Memory card/battery cover Tripod socket • In this guide, icons are used to represent the corresponding camera buttons and dials on which they appear or which they resemble.
Part Names and Conventions in This Guide (Shortcut) / c (Direct print) button + (AE lock/FE lock) / d (Jump) button (AF Frame Selector) / a (Single image erase) button Screen (LCD monitor) Diopter adjustment dial Viewfinder Microphone Indicator 1 (Playback) button Movie button AV OUT (Audio/video output) / DIGITAL terminal Remote terminal HDMITM terminal n button (Metering) button ISO speed / Up button e (Macro) / f (Manual focus) / Left button Control dial FUNC.
Contents Package Contents .............................2 Compatible Memory Cards ................2 Preliminary Notes and Legal Information.......................................3 Part Names and Conventions in This Guide .......................................4 Contents ............................................6 Contents: Basic Operations ...............8 Safety Precautions...........................10 Initial Preparations ...........................13 Trying the Camera Out ....................
Contents 7 Setting Menu ..................171 Adjusting Basic Camera Functions .................................... 172 8 Accessories....................185 Tips on Using Included Accessories ................................ 186 Optional Accessories .................... 186 Using Optional Accessories .......... 190 Printing Images ............................. 206 Using an Eye-Fi Card .................... 216 9 Appendix.........................219 Troubleshooting.............................
Contents: Basic Operations 4 Shoot Use camera-determined settings (Auto Mode) ............................. 48 Shooting people well I Portraits (p. 72) V Kids and Pets (p. 72) w At the Beach (p. 73) P Against Snow (p. 74) Matching specific scenes J Landscape (p. 72) Sports (p. 73) S O Under Water (p. 73) Night Scenes (p. 73) t Fireworks (p. 74) Foliage (p. 74) Applying special effects Vivid Colors (p. 75) Poster Effect (p. 75) “Aged” Photos (p. 77) Miniature Effect (p.
Contents: Basic Operations 1 View View images (Playback Mode) ................................................... 140 Automatic playback (Slideshow)................................................. 150 On a TV ...................................................................................... 190 On a computer.............................................................................. 26 Browse through images quickly.................................................. 145 Erase images.......
Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death.
Safety Precautions • Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Safety Precautions • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit. • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur.
Initial Preparations Prepare for shooting as follows. Attaching Accessories Attach the strap. Attach the included strap to the camera as shown. On the other side of the camera, attach the strap the same way. Attach the lens cap to the strap. Remove the lens cap from the lens and attach the lens cap cord to the strap. Always remove the lens cap before turning the camera on. Try attaching the lens cap to the neck strap when the cap is not in use.
Initial Preparations Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. Remove the cover. Insert the battery. After aligning the o marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Charge the battery. For CB-2LC: Flip out the plug ( CB-2LC CB-2LCE ) and plug the charger into a power outlet ( ).
Initial Preparations • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery, see “Specifications” (p. 34).
Initial Preparations If you insert the battery facing the wrong way, cannot be locked into the correct position. Always confirm that the battery is facing the right way and locks when inserted. Insert the memory card. Insert the memory card facing as shown until it clicks into the locked position. Make sure the memory card is facing the right Label way when you insert it. Inserting memory cards facing the wrong way may damage the camera. Close the cover.
Initial Preparations Using the Screen Prepare the screen for use. Open the screen ( ) and rotate it toward the lens 180° ( ). Close the screen in this orientation ( ). • The screen can only open to approximately 175° in direction . Be careful not to open the screen any further than this, as it will damage the camera. Adjusting the Screen Angle and Orientation You can adjust the angle and orientation of the screen as needed, to suit shooting conditions.
Initial Preparations Setting the Date and Time A screen for setting the date and time is displayed the first time you turn the camera on. Be sure to specify the date and time, which is the basis for dates and times added to your images. Turn the camera on. Press the ON/OFF button. The [Date/Time] screen is displayed. Set the date and time. Press the qr buttons to choose an option. Press the op buttons or turn the 7 dial to specify the date and time. When finished, press the m button.
Initial Preparations • Unless you set the date, time, and local time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information. • To set daylight saving time (1 hour ahead), choose in step 2 and then choose by pressing the op buttons or turning the 7 dial. Changing the Date and Time Adjust the date and time as follows. Access the camera menu. Press the n button. Choose [Date/Time]. Move the zoom lever to choose the 3 tab.
Initial Preparations Display Language The display language can be changed as needed. Enter Playback mode. Press the 1 button. Access the setting screen. Press and hold the m button, and then immediately press the n button. Set the display language. Press the opqr buttons or turn the 7 dial to choose a language, and then press the m button. Once the display language has been set, the setting screen is no longer displayed.
Still Images Movies Trying the Camera Out Follow these instructions to turn the camera on, shoot still images or movies, and then view them. Shooting (Smart Auto) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. Press the ON/OFF button. The startup screen is displayed. Enter A mode. Set the mode dial to A. Aim the camera at the subject.
Trying the Camera Out Shoot. Shooting Still Images Focus. Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. AF Frames If [Raise the flash] appears on the screen, move the switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera. Shoot. Press the shutter button all the way down.
Trying the Camera Out Shooting Movies Start shooting. If the flash is already up, push it down with your finger, into the camera. Elapsed Time Press the movie button. The camera beeps once as recording begins, and [ Rec] is displayed with the elapsed time. Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. Once recording begins, you can take your finger off the movie button. Finish shooting. Press the movie button again to stop shooting.
Trying the Camera Out Viewing After shooting images or movies, you can view them on the screen as follows. Enter Playback mode. Press the 1 button. Your last shot is displayed. Browse through your images. To view the previous image, press the q button or turn the 7 dial counterclockwise. To view the next image, press the r button or turn the 7 dial clockwise. Press and hold the qr buttons to browse through images quickly. Images appear grainy at this time.
Trying the Camera Out Play movies. Press the m button to access the movie control panel, choose (either press the qr buttons or turn the 7 dial), and then press the m button again. Playback now begins, and after the movie is finished, is displayed. To adjust the volume, press the op buttons. • To switch to Shooting mode from Playback mode, press the shutter button halfway. Erasing the Images You can choose and erase unneeded images one by one.
Included Software, Manuals The software and the manuals on the included CD-ROMs are introduced below, with instructions for installation, saving images to a computer, and using the manuals. Features of the Included Software After installing the software on the CD-ROM, you can do the following things on your computer.
Included Software, Manuals System Requirements The included software can be used on the following computers. Windows Windows 7 (including SP1) Operating System Windows Vista SP2 Windows XP SP3 Computer Computers running one of the above operating systems (preinstalled), with an included USB port Processor Pentium 1.3 GHz or higher (still images), Core 2 Duo 2.
Included Software, Manuals Installing the Software Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Insert the CD-ROM in the computer’s CD-ROM drive. Insert the included CD-ROM (DIGITAL CAMERA Solution Disk) (p. 2) in the computer’s CD-ROM drive. On a Macintosh computer, after inserting the disc, double-click the desktop disc icon to open it, and then double-click the icon displayed. Install the files.
Included Software, Manuals Saving Images to a Computer Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Connect the camera to the computer. Make sure the camera is off. Open the cover ( ). With the smaller plug of the included interface cable (p. 2) in the orientation shown, insert the plug fully into the camera terminal ( ). Insert the larger plug of the interface cable in the computer’s USB port.
Included Software, Manuals Choose [Downloads Images From Canon Camera using Canon CameraWindow] and then click [OK]. Double click CameraWindow . Save the images to the computer. Click [Import Images from Camera], and then click [Import Untransferred Images]. Images are now saved to the Pictures folder on the computer, in separate folders named by date. After images are saved, close CameraWindow, press the 1 button to turn the camera off, and unplug the cable.
Included Software, Manuals • In Windows 7, if the screen in step 2 is not displayed, click the icon in the taskbar. • To start CameraWindow in Windows Vista or XP, click [Downloads Images From Canon Camera using Canon CameraWindow] on the screen displayed when you turn the camera on in step 2. If CameraWindow is not displayed, click the [Start] menu and choose [All Programs] [Canon Utilities] [CameraWindow] [CameraWindow].
Accessories Included Accessories Neck Strap NS-DC9 Lens Cap (with cord) Battery Charger Battery Pack CB-2LC/ NB-10L*1 CB-2LCE*1 (with terminal cover) DIGITAL CAMERA Solution Disk Interface Cable IFC-400PCU*1 Power Memory Card Card Reader Windows/ Macintosh Computer Cables AC Adapter Kit ACK-DC80 HDMI Cable HTC-100 TV/Video System Stereo AV Cable AVC-DC400ST *1 Also available for purchase separately.
Accessories Flash Units Speedlite*2 580EX II, 430EX II, 320EX, 270EX II Macro Ring Lite MR-14EX*4 Macro Twin Lite MT-24EX*3 Cases Waterproof Case WP-DC44 *5 Soft Case SC-DC75 Lens Accessories Canon-brand Lens Filter (58 mm dia.)*6 Lens Hood LH-DC70 Canon PictBridge-Compatible Printers Other Accessories Remote Switch RS60-E3 Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories.
Specifications Camera Effective Pixels Approx. 14.3 million pixels Lens Focal Length 4x zoom: 15.1 (W) – 60.4 (T) mm (35mm film equivalent: 28 (W) – 112 (T) mm) Viewfinder Real-image zoom viewfinder Dioptric Adjustment Range: -3.0 to +1.0 m-1 (dpt) Coverage: 77% LCD Monitor 7.5 cm (3.0 in.) color TFT LCD Effective Pixels: Approx. 922,000 dots File Formats Conforms to DCF and DPOF 1.1 standards Data Types Still Images: Exif 2.3 (JPEG) and RAW (Canon CR2 format) Movies: MOV (H.
Specifications Number of 4:3 Shots per Memory Card Resolution (Pixels) Compression Ratio No. Shots per Memory Card (Approx.) 4 GB 16 GB (Large) 1040 4259 14M/4352x3264 2154 8824 (Medium 1) 1978 8101 4022 16473 7M/3072x2304 6352 26010 2M/1600x1200 (Medium 2) 12069 49420 (Small) 20116 82367 30174 123550 190 783 0.3M/640x480 RAW Images 4352x3264 — • These values are measured according to Canon standards and may change depending on the subject, memory card and camera settings.
Specifications Flash Range Maximum wide angle (j) 50 cm – 7.0 m (approx. 1.6 – 23 ft.) Maximum telephoto (i) 100 cm – 3.1 m (approx. 3.3 – 10.2 ft.) Shooting Range Shooting Mode Focusing Maximum Wide Angle (j) Range Maximum Telephoto (i) A — 20 cm (7.9 in.) – infinity 85 cm (2.8 ft.) – infinity V — 1 m (3.3 ft.) – infinity 1.3 m (4.3 ft.) – infinity — 1 m (3.3 ft.) – infinity 1.3 m (4.3 ft.) – infinity 40 cm (1.3 ft.) – infinity 1.3 m (4.3 ft.) – infinity Other modes e* 20 cm (7.9 in.
Specifications Aperture f/number f/2.8 – f/16 (W), f/5.8 – f/16 (T) B mode available values* f/2.8, f/3.2, f/3.5, f/4.0, f/4.5, f/5.0, f/5.6, f/5.8, f/6.3, f/7.1, f/8.0, f/9.0, f/10, f/11, f/13, f/14, f/16 * Not all aperture values are available at all zoom positions. Battery Pack NB-10L Type Rechargeable lithium-ion battery Nominal Voltage 7.4 V DC Nominal Capacity 920 mAh Charging Cycles Approx. 300 Operating Temperature 0 – 40 °C (32 – 104 °F) Dimensions 32.5 x 45.4 x 15.1 mm (1.28 x 1.
Specifications Bracket BKT-DC1 (Sold Separately) Dimensions (Max.) 220.0 x 32.0 x 19.0 mm (8.66 x 1.26 x 0.75 in.) Weight Approx. 90 g (Approx. 3.2 oz.) Lens Hood LH-DC70 (Sold Separately) Max. Diameter x Length 60.0 x 27.9 mm (φ2.36 x 1.10 in.) Weight Approx. 8.0 g (Approx. 0.28 oz.) Macrolite Adapter MLA-DC1 (Sold Separately) Max. Diameter x Length φ65.3 x 49.5 mm (φ2.57 x 1.95 in.) Weight Approx. 30 g (Approx. 1.06 oz.) • All data is based on tests by Canon.
1 Camera Basics Basic camera operations and features 39
On/Off Shooting Mode Press the ON/OFF button to turn the camera on and prepare for shooting. To turn the camera off, press the ON/OFF button again. Playback Mode Press the 1 button to turn the camera on and view your shots. To turn the camera off, press the 1 button again. • To switch to Playback mode from Shooting mode, press the 1 button. • To switch to Shooting mode from Playback mode, press the shutter button halfway (p. 41).
Shutter Button To ensure your shots are in focus, always press the shutter button lightly (halfway) initially. Once the subject is in focus, press the button all the way down to shoot. In this manual, shutter button operations are described as pressing the button halfway or all the way down. Press halfway. (Press lightly to focus.) Press the shutter button halfway. The camera beeps twice, and AF frames are displayed around image areas in focus. Press all the way down.
Optical Viewfinder To conserve battery power when shooting, you can use the optical viewfinder instead of the screen. Shoot the same way as when using the screen. Deactivate the screen. Press the p button to turn the screen off (p. 43). Adjust the diopter. As you look through the optical viewfinder, turn the dial one way or the other so that images look sharp. • The area visible in the optical viewfinder may differ slightly from the image area in your shots.
Shooting Modes Use the mode dial to access each shooting mode. Auto Mode Fully automatic shooting, with camera-determined settings (pp. 21, 48). P, Tv, Av, M, C1, and C2 Modes Take a variety of shots using your preferred settings (pp. 95, 127). Scene Mode Shoot with optimal settings for specific scenes (p. 72). Creative Filters Mode Add a variety of effects to images when shooting (p. 75). Movie Mode For shooting movies (p. 92).
FUNC. Menu Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (pp. 230 – 237). Access the FUNC. menu. Press the m button. Choose a menu item. Press the op buttons to choose a menu item. Available options are shown at the bottom of the screen. In some menu items, functions can be Options Menu Items specified simply by pressing the m or r button, or another screen is displayed for configuring the function.
n Menu Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting (4), playback (1), and so on. Note that available settings vary depending on the selected shooting or playback mode (pp. 234 – 239). Access the menu. Press the n button. Choose a tab. Move the zoom lever or press the qr buttons to choose a tab. Choose a setting. Press the op buttons or turn the 7 dial to choose a setting.
Indicator Display The power lamp and indicator on the back of the camera (p. 5) will light or blink depending on the camera’s status. Indicator Color Power Lamp Green Indicator Status On Camera on Blinking Low battery On Green Blinking Indicator On Orange Camera Status Blinking Ready to shoot (when the flash is deactivated) Recording/reading/transmitting images Distance warning (p. 221), or cannot focus (when the flash is deactivated) (p.
2 Smart Auto Mode Convenient mode for easy shots with greater control over shooting 47
Still Images Movies Shooting in Smart Auto Mode For fully automatic selection at optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. Press the ON/OFF button. The startup screen is displayed. Enter A mode. Set the mode dial to A. Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
Shooting in Smart Auto Mode Several AF frames are displayed when multiple areas are in focus. AF Frames If [Raise the flash] appears on the screen, move the switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera. Shoot. Press the shutter button all the way down. As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically.
Shooting in Smart Auto Mode Resize the subject and recompose the shot as needed. To resize the subject, do the same thing as in step 3 on p. 48. However, note that the sound of camera operations will be recorded. When you recompose shots, the focus, brightness, and colors will be automatically adjusted. Finish shooting. Press the movie button again to stop shooting. The camera beeps twice as recording stops. Recording will stop automatically when the memory card becomes full.
Shooting in Smart Auto Mode • A blinking h icon displayed when you attempt to shoot indicates that shooting is not possible until the flash has finished recharging. Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again. • The flash firing during shots indicates that the camera has automatically attempted to ensure optimal colors in the main subject and background (Multiarea White Balance).
Shooting in Smart Auto Mode Scene Icons In A mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color.
Shooting in Smart Auto Mode Image Stabilization Icons Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in A mode.
Shooting in Smart Auto Mode On-Screen Frames A variety of frames are displayed once the camera detects subjects you are aiming the camera at. • A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus. However, if the camera detects subject movement, only the white frame will remain on the screen.
Common, Convenient Features Still Images Movies Zooming In Closer on Subjects (Digital Zoom) When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 16x enlargement. Move the zoom lever toward i. Hold the lever until zooming stops. Zooming stops at the largest possible zoom factor (before the image becomes grainy), which is displayed when you release the zoom lever. Zoom Factor Move the zoom lever toward i again.
Common, Convenient Features Still Images Movies Using the Self-Timer With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button. Configure the setting. Press the m button, choose in the menu, and then choose the ] option (p. 44). Once the setting is complete, ] is displayed. Shoot. For Still Images: Press the shutter button halfway to focus on the subject, and then press it all the way down.
Common, Convenient Features Using the Self-Timer to Avoid Camera Shake This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot. Configure the setting. Follow step 1 on p. 56 and choose [. Once the setting is complete, [ is displayed. Follow step 2 on p. 56 to shoot.
Common, Convenient Features Still Images Adding the Shooting Date and Time The camera can add the shooting date and time to images in the lower-right corner. However, note that these cannot be removed. Confirm beforehand that the date and time are correct (p. 18). Configure the setting. Press the n button, choose [Date Stamp] on the 4 tab, and then choose the desired option (p. 45). Once the setting is complete, [DATE] is displayed. Shoot.
Common, Convenient Features Still Images Choosing Subjects to Focus On (Tracking AF) Shoot after choosing a subject to focus on as follows. Specify Tracking AF. Press the o button. is displayed in the center of the screen. Choose a subject to focus on. Aim the camera so that is on the desired subject, and then press the shutter button halfway. A blue frame is displayed, and the camera will keep the subject in focus and image brightness adjusted (Servo AF). Shoot.
Image Customization Features Still Images Changing the Aspect Ratio Change the image aspect ratio (ratio of width to height) as follows. Configure the setting. Press the m button, choose in the menu, and choose the desired option (p. 44). Once the setting is complete, the screen aspect ratio will be updated. To restore the original setting, repeat this process but choose . Same aspect ratio as HDTVs, used for display on widescreen HDTVs or similar display devices.
Image Customization Features Still Images Changing Image Resolution (Size) Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see “Specifications” (p. 34). Configure the setting. Press the m button, choose in the menu, and choose the desired option (p. 44). The option you configured is now displayed. To restore the original setting, repeat this process but choose .
Image Customization Features Still Images Changing the Compression Ratio (Image Quality) Choose from two compression ratios, as follows: (Fine), (Normal). For guidelines on how many shots at each compression ratio can fit on a memory card, see “Specifications” (p. 34). Configure the setting. Press the m button, choose in the menu, press the n button, and choose the desired option (p. 44). The option you configured is now displayed. To restore the original setting, repeat this process but choose .
Image Customization Features Configure the setting. Choose [Red-Eye Corr.], and then choose [On] (p. 45). Once the setting is complete, R is displayed. To restore the original setting, repeat this process but choose [Off]. • Red-eye correction may be applied to image areas other than eyes (if the camera misinterprets red eye makeup as red pupils, for example). • You can also correct existing images (p. 168).
Image Customization Features • After you are finished shooting under mercury lamps, you should set [Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by mercury lamps may be corrected by mistake. • Try taking some test shots first, to make sure you obtain the desired results. Movies Changing Movie Image Quality 3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Specifications” (p. 34).
Image Customization Features Image Quality Resolution Frame Rate Details 1920 x 1080 24 fps 1280 x 720 30 fps For shooting in Full HD For shooting in HD 640 x 480 30 fps For shooting in standard definition • In and modes, black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. Movies Using the Wind Filter Distorted audio caused by recording when the wind is strong can be reduced.
Helpful Shooting Features Still Images Using the Electronic Level An electronic level can be displayed on the screen when shooting as a guideline to determine if the camera is level. Display the electronic level. Press the p button several times to display the electronic level. Level the camera as needed. Level the camera so that the center of the electronic level is green. • If the electronic level is not displayed in step 1, press the n button, and on the 4 tab, choose [Custom Display].
Helpful Shooting Features Still Images Magnifying the Area in Focus You can check the focus by pressing the shutter button halfway to enlarge the image area in the AF frame. Configure the setting. Press the n button, choose [AF-Point Zoom] on the 4 tab, and then choose [On] (p. 45). Check the focus. Press the shutter button halfway. The face detected as the main subject is now magnified. To restore the original setting, choose [Off] in step 1.
Helpful Shooting Features Still Images Checking for Closed Eyes is displayed when the camera detects that people may have closed their eyes. Configure the setting. Press the n button, choose [Blink Detection] on the 4 tab, and then choose [On] (p. 45). Shoot. A frame, accompanied by , is displayed when the camera detects a person whose eyes are closed. To restore the original setting, choose [Off] in step 1.
Still Images Customizing Camera Operation Customize shooting functions on the 4 tab of the menu as follows. For instructions on menu functions, see “n Menu” (p. 45). Deactivating the AF Assist Beam You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions. Configure the setting. Press the n button, choose [AF-assist Beam] on the 4 tab, and then choose [Off] (p. 45).
Customizing Camera Operation Changing the Image Display Period After Shots Change how long images are displayed after shots as follows. Configure the setting. Press the n button, choose [Review] on the 4 tab, and then choose the desired option (p. 45). To restore the original setting, repeat this process but choose [2 sec.]. 2 – 10 sec. Displays images for the specified time. Hold Displays images until you press the shutter button halfway. Off No image display after shots.
3 Other Shooting Modes Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions 71
Still Images Movies Specific Scenes Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. Enter K mode. Set the mode dial to K. Choose a shooting mode. Press the m button, choose in the menu, and then choose a shooting mode (p. 44). Shoot. Still Images Movies I Shoot portraits (Portrait) Take shots of people with a softening effect.
Specific Scenes Still Images Shoot moving subjects (Sports) Shoot continuously as the camera keeps the subject in focus. For details on the shooting range, see “Specifications” (p. 34). Still Images Shoot evening scenes without using a tripod (Handheld NightScene) Beautiful shots of evening scenes, created by combining consecutive shots to reduce camera shake and image noise. When using a tripod, shoot in A mode (p. 48).
Specific Scenes Still Images Movies O Take shots of foliage (Foliage) Shoot trees and leaves, such as new growth, autumn leaves or blossoms, in vivid colors. Still Images Movies P Shoot with snowy backgrounds (Snow) Bright, natural-colored shots of people against snowy backgrounds. Still Images Movies t Shoot fireworks (Fireworks) Vivid shots of fireworks. • Because the camera will shoot continuously in mode, hold it steady while shooting.
Still Images Movies Image Effects (Creative Filters) Add a variety of effects to images when shooting. Enter mode. Set the mode dial to . Choose a shooting mode. Press the m button, choose in the menu, and then choose a shooting mode (p. 44). Shoot. • In , , , , , and modes, try taking some test shots first, to make sure you obtain the desired results. Still Images Movies Shoot in vivid colors (Super Vivid) Shots in rich, vivid colors.
Image Effects (Creative Filters) Still Images Shooting High-Contrast Scenes (High Dynamic Range) Three consecutive images are captured at different brightness levels each time you shoot, and the camera combines image areas with optimal brightness to create a single image. This mode can reduce the washed-out highlights and loss of detail in shadows that tends to occur in high-contrast shots. Choose . Follow steps 1 – 2 on p. 75 and choose . Hold the camera still.
Image Effects (Creative Filters) Adding Color Effects Choose a color effect. Follow steps 1 – 2 on p. 75 and choose . Press the button, choose a color effect (either press the qr buttons or turn the 7 dial), and then press the button again. Effect Off — Sepia Sepia tone shots. B/W Black and white shots. Super Vivid Shots in rich, vivid colors. Poster Effect Shots that resemble an old poster or illustration.
Image Effects (Creative Filters) Still Images Shooting with a Fish-Eye Lens Effect (Fish-eye Effect) Shoot with the distorting effect of a fish-eye lens. Choose . Follow steps 1 – 2 on p. 75 and choose . Choose an effect level. Turn the z dial to choose an effect level. A preview is shown of how your shot will look with the effect applied. Shoot.
Image Effects (Creative Filters) For movies, choose the movie playback speed. Turn the z dial to choose the speed. Return to the shooting screen and shoot. Press the button to return to the shooting screen, and then shoot. Playback Speed and Estimated Playback Time (for OneMinute Clips) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. • The zoom is not available when shooting movies. Be sure to set the zoom before shooting.
Image Effects (Creative Filters) Still Images Shooting with a Toy Camera Effect (Toy Camera Effect) This effect makes images resemble shots from a toy camera by vignetting (darker, blurred image corners) and changing the overall color. Choose . Follow steps 1 – 2 on p. 75 and choose . Choose a color tone. Turn the z dial to choose a color tone. A preview is shown of how your shot will look with the effect applied. Shoot. Standard Shots resemble toy camera images.
Image Effects (Creative Filters) Still Images Movies Shooting in Monochrome Shoot images in black and white, sepia, or blue and white. Choose . Follow steps 1 – 2 on p. 75 and choose . Choose a color tone. Turn the z dial to choose a color tone. A preview is shown of how your shot will look with the effect applied. Shoot. B/W Black and white shots. Sepia Sepia tone shots. Blue Blue and white shots.
Image Effects (Creative Filters) Still Images Movies Shooting with Color Accent Choose a single image color to keep and change other colors to black and white. Choose T. Follow steps 1 – 2 on p. 75 and choose T. Access the setting screen. Press the button. The original image and the Color Accent image are displayed one after another. By default, green is the color that will be kept. Specify the color. Position the center frame over the color to keep, and then press the q button.
Image Effects (Creative Filters) Still Images Movies Shooting with Color Swap You can replace one image color with another before shooting. Note that only one color can be replaced. Choose Y. Follow steps 1 – 2 on p. 75 and choose Y. Access the setting screen. Press the button. The original image and the Color Swap image are displayed one after another. By default, green will be replaced with gray. Specify the color to replace.
Image Effects (Creative Filters) To replace only your specified color, choose a large negative value. To replace colors similar to your specified color as well, choose a large positive value. Press the button to return to the shooting screen. • Using the flash in this mode may cause unexpected results. • In some shooting scenes, images may look grainy and colors may not look as expected.
Special Modes for Other Purposes Still Images Movies Auto Clip Recording (Movie Digest) You can make a short movie of a day just by shooting still images. Before each shot, the camera will automatically record a movie clip of the scene. Each clip recorded that day is combined into a single file. Choose . Follow steps 1 – 2 on p. 72 and choose . Shoot. To shoot a still image, press the shutter button all the way down.
Special Modes for Other Purposes Still Images Auto Shooting After Face Detection (Smart Shutter) Auto Shooting After Smile Detection The camera shoots automatically after detecting a smile, even without you pressing the shutter button. Choose . Follow steps 1 – 2 on p. 72 and choose , and then press the button. Press the qr buttons or turn the 7 dial to choose , and then press the button. The camera now enters shooting standby mode, and [Smile Detection on] is displayed.
Special Modes for Other Purposes Using the Wink Self-Timer Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected. Choose . Follow steps 1 – 2 on p. 72 and choose , and then press the button. Press the qr buttons or turn the 7 dial to choose , and then press the button. Compose the shot and press the shutter button halfway. Make sure a green frame is displayed around the face of the person who will wink.
Special Modes for Other Purposes Using the Face Self-Timer The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area (p. 112). This is useful when including yourself in group photos or similar shots. Choose . Follow steps 1 – 2 on p. 72 and choose , and then press the button. Press the qr buttons or turn the 7 dial to choose , and then press the button. Compose the shot and press the shutter button halfway.
Special Modes for Other Purposes Still Images High-Speed Continuous Shooting (High-speed Burst HQ) You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on continuous shooting speed, and maximum number of continuous shots, see “Continuous Shooting Speed” (see “Specifications” (p. 34)). HQ: High Quality Choose . Follow steps 1 – 2 on p. 72 and choose . Shoot. Hold the shutter button all the way down to shoot continuously.
Special Modes for Other Purposes • Grouped images can be played back individually (p. 148) and ungrouped (p. 148). • Protecting (p. 152) a grouped image will protect all images in the group. • Grouped images can be viewed individually when played back using Filtered Playback (p. 145) or Smart Shuffle (p. 151). In this case, images are temporarily ungrouped. • Grouped images cannot be tagged as favorites (p. 161), edited (pp. 159 – 168), categorized (p. 162), or printed (p.
Special Modes for Other Purposes Still Images Shooting Stitch Assist Images Shoot a large subject by taking multiple shots at various positions, and then use the included software to combine them into a panorama. Choose x or v. Follow steps 1 – 2 on p. 72 and choose x or v. Take the first shot. The first shot will determine the exposure and white balance. Take additional shots. Compose the second shot so that it partially overlaps the image area of first shot.
Movies Shooting Various Movies Shooting Movies in E Mode Enter E mode. Set the mode dial to E. Configure the settings to suit the movie (pp. 230 – 238). Shoot. Press the movie button. To stop movie recording, press the movie button again. Locking or Changing Image Brightness Before Shooting Before shooting, you can lock the exposure or change it in 1/3-stop increments within a range of –2 to +2. Lock the exposure. Press the button to lock the exposure. The exposure shift bar is displayed.
Shooting Various Movies Shooting iFrame Movies Shoot movies that can be edited with iFrame-compatible software or devices. You can quickly edit, save, and manage iFrame movies using the included software. Choose . Set the mode dial to E. Press the m button, choose E in the menu, and then choose (p. 44). Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. Shoot. • The resolution is (p. 64) and cannot be changed.
4 G mode More discerning shots, in your preferred shooting style • Instructions in this chapter apply to the camera with the mode dial set to G mode. • G: Program AE; AE: Auto Exposure • Before using a function introduced in this chapter in modes other than G, make sure the function is available in that mode (pp. 230 – 237).
Still Images Movies Shooting in Program AE Mode (G Mode) You can customize many function settings to suit your preferred shooting style. Enter G mode. Set the mode dial to G. Customize the settings as desired (pp. 97 – 124), and then shoot. • If adequate exposure cannot be obtained when you press the shutter button halfway, shutter speeds and aperture values are displayed in orange. To obtain adequate exposure, try adjusting the following settings. - Activate the flash (p.
Still Images Image Brightness (Exposure Compensation) Adjusting Image Brightness (Exposure Compensation) The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –3 to +3. As you watch the screen, turn the exposure compensation dial to adjust brightness. The correction level you specified is now displayed. Locking Image Brightness/Exposure (AE Lock) Before shooting, you can lock the exposure, or you can specify focus and exposure separately. Lock the exposure.
Image Brightness (Exposure Compensation) Changing the Metering Method Adjust the metering method (how brightness is measured) to suit shooting conditions as follows. button, turn the 7 dial to choose the desired option, and then press the button again. The option you configured is now displayed. Press the Evaluative For typical shooting conditions, including backlit shots. Automatically adjusts exposure to match the shooting conditions.
Image Brightness (Exposure Compensation) Changing the ISO Speed Press the o button, choose an option (either press the qr buttons or turn the 7 dial), and then press the m button. The option you configured is now displayed. Automatically adjusts the ISO speed to suit the shooting mode and conditions. For shooting outdoors in fair weather. Low For shooting in cloudy conditions, or at twilight. High For shooting night scenes, or in dark rooms.
Image Brightness (Exposure Compensation) Configure the setting. Choose [Max ISO Speed], and then choose the desired option (p. 45). Adjusting Sensitivity Choose from three levels of sensitivity for . Follow step 1 in “Adjusting the Maximum ISO Speed” (p. 99) to access the setting screen. Choose [Rate of Change], and then choose the desired option (p. 45). • If you press the n button while in the ISO auto settings screen (p. 99), the [ISO Auto Settings] screen will appear.
Image Brightness (Exposure Compensation) Auto Exposure Bracketing (AEB Mode) Three consecutive images are captured at different exposure levels (standard exposure, underexposure, and then overexposure) each time you shoot. You can adjust the amount of underexposure and overexposure (relative to standard exposure) from –2 to +2 stops in 1/3-stop increments. Choose . Press the m button, choose and then choose in the menu, (p. 44). Configure the setting.
Image Brightness (Exposure Compensation) Correcting Image Brightness (i-Contrast) Before shooting, excessively bright or dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. To avoid washed-out highlights, specify Dynamic Range Correction. To preserve image detail in shadows, specify Shadow Correct. • Under some shooting conditions, correction may be inaccurate or may cause images to appear grainy. • You can also correct existing images (p.
Image Brightness (Exposure Compensation) Shadow Correct Press the m button, choose in the menu, press the n button, and choose (p. 44). Once the setting is complete, @ is displayed. Using the ND Filter To shoot at slower shutter speeds and smaller aperture values, use the ND filter, which reduces light intensity to 1/8 the actual level (equivalent to 3 stops). Press the m button, choose and then choose in the menu, (p. 44).
Color and Continuous Shooting Still Images Movies Adjusting White Balance By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. Press the m button, choose in the menu, and choose the desired option (p. 44). The option you configured is now displayed. Auto Automatically sets the optimal white balance for the shooting conditions. Day Light For shooting outdoors in fair weather.
Color and Continuous Shooting Custom White Balance For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot. Follow the steps in “Adjusting White Balance” (p. 104) to choose or . Aim the camera at a plain white subject, so that the entire screen is white. Press the button.
Color and Continuous Shooting • The camera will retain white balance correction levels even if you switch to another white balance option in step 1, but correction levels will be reset if you record custom white balance data. • B: blue; A: amber; M: magenta; G: green • One level of blue/amber correction is equivalent to about 7 mireds on a color temperature conversion filter.
Color and Continuous Shooting Vivid Blue Emphasizes blues in images. Makes the sky, ocean, and other blue subjects more vivid. Vivid Green Emphasizes greens in images. Makes mountains, foliage, and other green subjects more vivid. Vivid Red Emphasizes reds in images. Makes red subjects more vivid. Custom Color Adjust contrast, sharpness, color saturation, and other qualities as desired (see below). • White balance (p. 104) cannot be set in or modes.
Color and Continuous Shooting Still Images Continuous Shooting Hold the shutter button all the way down to shoot continuously. Configure the setting. Press the m button, choose in the menu, and choose the desired option (p. 44). The option you configured is now displayed. Shoot. Hold the shutter button all the way down to shoot continuously. Mode W Continuous Description Continuous shooting, with the focus and exposure determined when you press the shutter button halfway.
Shooting Range and Focusing Still Images Movies Shooting at Preset Focal Lengths (Step Zoom) You can shoot at preset focal lengths of 28 mm, 35 mm, 50 mm, 85 mm, 100 mm or 112 mm (35mm film equivalents). This is convenient when you want to shoot at the angle of view of those focal lengths. Assign to the z dial (p. 132). Choose a focal length. Turn the z dial clockwise until it clicks to change the focal length from 28 mm to 35 mm.
Shooting Range and Focusing • If the flash fires, vignetting may occur. • Be careful to avoid damaging the lens. • In the yellow bar display area below the zoom bar, e will turn gray and the camera will not focus. • To prevent camera shake, try mounting the camera on a tripod and shooting with the camera set to [ (p. 57). Still Images Movies Shooting in Manual Focus Mode When focusing is not possible in AF mode, use manual focus.
Shooting Range and Focusing • AF frame mode or size cannot be changed while focusing manually (p. 112). If you want to change the AF frame mode or size, cancel manual focus mode first. • Focusing is possible when using the digital zoom (p. 55) or digital tele-converter, or when using a TV as a display (p. 191), but the magnified display will not appear. • To focus more accurately, try attaching the camera to a tripod to stabilize it.
Shooting Range and Focusing • The respective focal lengths when using [1.5x] and [1.9x] are 42.0 – 168 mm and 53.2 – 213 mm (35mm film equivalent). • The shutter speed may be equivalent when you move the zoom lever all the way toward i for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step 2 on p. 55. Still Images Movies Changing the AF Frame Mode Change the AF (auto focus) frame mode to suit the shooting conditions as follows.
Shooting Range and Focusing • If faces are not detected, or when only gray frames are displayed (without a white frame), up to nine green frames are displayed in the areas in focus when you press the shutter button halfway. • If faces are not detected when Servo AF (p. 116) is set to [On], the AF frame is displayed in the center of the screen when you press the shutter button halfway.
Shooting Range and Focusing Recompose the shot. Keeping the shutter button pressed halfway, move the camera to recompose the shot. Shoot. Press the shutter button all the way down. Still Images Moving and Resizing AF Frames (FlexiZone) When you want to change the position or size of the AF frame, set the AF frame mode to [FlexiZone] (p. 113). Prepare to move the AF frame. Press the button. The AF frame turns orange. Move and resize the AF frame.
Shooting Range and Focusing Still Images Choosing Subjects to Focus On (Tracking AF) Shoot after choosing a subject to focus on as follows. Choose [Tracking AF]. Follow the steps in “Changing the AF Frame Mode” (p. 112) to choose [Tracking AF]. is displayed in the center of the screen. Choose a subject to focus on. Aim the camera so that subject, and then press the is on the desired button. When the subject is detected, the camera beeps and is displayed.
Shooting Range and Focusing • [Servo AF] is set to [On] and cannot be changed. • Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely. • [AF-Point Zoom] on the 4 tab is not available. • e is not available. • The camera can detect subjects even if you press the shutter button halfway without pressing the button. After your shot, is displayed in the center of the screen.
Shooting Range and Focusing Still Images Changing the Focus Setting You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway. Press the n button, choose [Continuous AF] on the 4 tab, and then choose [Off] (p. 45).
Shooting Range and Focusing Choose the face to focus on. To switch the face frame to another detected face, press the button. After you have switched the face frame to all detected faces, [Face Select : Off] is displayed, and the specified AF frame mode screen is displayed again. Shoot. Press the shutter button halfway. After the camera focuses, changes to . Press the shutter button all the way down to shoot. Still Images Movies Shooting with the AF Lock The focus can be locked.
Shooting Range and Focusing Still Images Focus Bracketing (Focus-BKT Mode) Three consecutive images are captured each time you shoot, with the first one at the focal distance you set manually and the others at farther and nearer focal positions determined by presets. The distance from your specified focus can be set in three levels. Choose . Press the m button, choose and then choose in the menu, (p. 44). Configure the setting.
Still Images Flash Activating Flash You can have the flash fire for each shot. For details on the flash range, see “Flash Range” (see “Specifications” (p. 34)). Raise the flash. Move the switch. Configure the setting. Press the r button, choose h (either press the qr buttons or turn the 7 dial), and then press the m button. Once the setting is complete, h is displayed. • If the flash is lowered, the setting screen will not appear even if you press the r button.
Flash Shoot. Even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing. • Mount the camera on a tripod or take other measures to keep it still and prevent camera shake. In this case, set [IS Mode] to [Off] (p. 124). • If the flash is lowered, the setting screen will not appear even if you press the r button. Move the switch to raise the flash, then configure the setting.
Flash Shooting with the FE Lock Just as with the AE lock (p. 97), you can lock the exposure for the flash shots. Raise the flash and set it to h (p. 120). Lock the flash exposure. Aim the camera at the subject to shoot with the exposure locked, and then press the button. The flash fires, and when is displayed, the flash output level is retained. Compose the shot and shoot. After one shot, FE is unlocked and is no longer displayed.
Still Images Shooting RAW Images RAW images are “raw” (unprocessed) data, recorded with essentially no loss of image quality from the camera’s internal image processing. Use the included software to adjust RAW images as desired with minimal loss of image quality. Press the m button, choose in the menu, and choose the desired option (p. 44). Records JPEG images. JPEG images are processed in the camera for optimal image quality and compressed to reduce file size.
Other Settings Still Images Movies Changing the IS Mode Settings Access the setting screen. Press the n button, choose [IS Settings] on the 4 tab, and then press the m button (p. 45). Configure the setting. Choose [IS Mode], and then choose the desired option (p. 45). Optimal image stabilization for the Continuous shooting conditions is automatically applied (Intelligent IS) (p. 53). Shoot Only* Image stabilization is active only at the moment of shooting. Off Deactivates image stabilization.
Other Settings Movies Deactivating Powered IS Powered IS reduces slow camera shake that may occur when recording telephoto movies. However, this option may not produce the expected results when used for the stronger camera shake that may occur when shooting while walking or when moving the camera to match subject movement. In this case, set Powered IS to [Off]. Follow the steps in “Changing the IS Mode Settings” (p. 124) to access the [IS Settings] screen.
5 Tv, Av, M, C1, C2 Mode Take smarter, more sophisticated shots, and customize the camera for your shooting style • Instructions in this chapter apply to the camera as set to the respective mode.
Still Images Specific Shutter Speeds (Tv Mode) Set your preferred shutter speed before shooting as follows. The camera automatically adjusts the aperture value to suit your shutter speed. For details on available shutter speeds, see “Specifications” (p. 34). Enter M mode. Set the mode dial to M. Set the shutter speed. Turn the z dial to set the shutter speed. • With slow shutter speeds, there will be a delay before you can shoot again, as the camera processes images to reduce noise.
Still Images Specific Aperture Values (Av Mode) Set your preferred aperture value before shooting as follows. The camera automatically adjusts the shutter speed to suit your aperture value. For details on available aperture values, see “Specifications” (p. 34). Enter B mode. Set the mode dial to B. Set the aperture value. Turn the z dial to set the aperture value. • Orange display of shutter speeds when you press the shutter button halfway indicates that the settings deviate from standard exposure.
Still Images Specific Shutter Speeds and Aperture Values (M Mode) Follow these steps before shooting to set your preferred shutter speed and aperture value to obtain the desired exposure. For details on available shutter speeds and aperture values, see “Specifications” (p. 34). Enter D mode. Set the mode dial to D. Configure the setting. Turn the z dial to set the shutter speed, and turn the 7 dial to set the aperture value.
Specific Shutter Speeds and Aperture Values (M Mode) • D: Manual • Calculation of standard exposure is based on the specified metering method (p. 98). • You can customize camera operation so that turning the 7 dial changes shutter speed and turning the z dial changes the aperture value (p. 133). Adjusting the Flash Output Choose from the three flash levels in D mode. Enter D mode. Set the mode dial to D. Configure the setting.
Customization for Shooting Styles Still Images Movies Customizing Display Information Customize what information is shown in various display modes (switched by pressing the p button), and whether or not the information is shown on the LCD monitor or viewfinder. Access the setting screen. Press the n button, choose [Custom Display] on the 4 tab, and then press the m button (p. 45). Configure the setting. Press the opqr buttons or turn the 7 dial to choose an item, and then press the m button.
Customization for Shooting Styles • Settings will not be saved if you press the shutter button halfway and return to the shooting screen from the custom display settings screen. • Grayed-out items can also be specified, but they may not be displayed in some shooting modes. • Grid lines are not recorded in your shots. Still Images Movies Assigning Functions to the Front Dial and Control Dial Assign commonly used functions to the front dial and control dial, by shooting mode. Access the setting screen.
Customization for Shooting Styles Assignable Functions Functions you can assign to the front dial and control dial vary depending on shooting mode. On the setting screen, you can assign aspect ratio switching (p. 60), white balance correction (p. 104), step zoom (p. 109), or i-Contrast (p. 167) to modes indicated by in the following table. Shooting Mode Item Front Dial 1 Front Dial 2 Control Dial z 7 z 7 D B M M B M B M B M G B, B M, z 7 M, B • B: aperture value (p.
Customization for Shooting Styles Still Images Assigning Functions to the Movies Button Access the setting screen. Press the n button, choose [Set Shortcut button] on the 4 tab, and then press the m button (p. 45). Configure the setting. Press the opqr buttons or turn the 7 dial to choose a function to assign, and then press the m button. Use the assigned function as needed. Press the button to activate the assigned function. • To restore default settings, choose .
Customization for Shooting Styles Still Images Saving Shooting Settings Save commonly used shooting modes and your configured function settings for reuse. To access saved settings later, simply turn the mode dial to or . Even settings that are usually cleared when you switch shooting modes or turn the camera off (such as self-timer settings) can be retained this way. Settings that can be saved • • • • • • Shooting modes (G, M, B, and D) Items set in G, M, B, or D modes (pp.
Customization for Shooting Styles • To edit saved settings (except their shooting mode), choose or , change the settings, and then repeat steps 2 – 3. These setting details are not applied in other shooting modes. • To clear information you have saved to or and restore default values, turn the mode dial to or and choose [Reset All] (p. 183).
Customization for Shooting Styles Rearrange the menu list order, as needed. Press the op buttons or turn the 7 dial to choose [Sort], and then press the m button. Press the op buttons or turn the 7 dial to choose a menu to move, and then press the m button. Press the op buttons or turn the 7 dial to change the order, and then press the m button. Press the n button. • Grayed-out items in step 2 can also be specified, but they may not be available in some shooting modes.
6 Playback Mode Have fun reviewing your shots, and browse or edit them in many ways • To prepare the camera for these operations, press the 1 button to enter Playback mode. • It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Still Images Movies Viewing After shooting images or movies, you can view them on the screen as follows. Enter Playback mode. Press the 1 button. Your last shot is displayed. Browse through your images. To view the previous image, press the q button or turn the 7 dial counterclockwise. To view the next image, press the r button or turn the 7 dial clockwise. Press and hold the qr buttons to browse through images quickly. Images appear grainy at this time.
Viewing Play movies. To start playback, press the m button to access the movie control panel, choose (either press the qr buttons or turn the 7 dial), and then press the m button again. Adjust the volume. Press the op buttons to adjust the volume. Pause playback. To pause playback, press the m button. The movie control panel is displayed. To resume playback, press the qr buttons or turn the 7 dial to choose , and then press the m button. After the movie is finished, is displayed.
Viewing Still Images Movies Switching Display Modes Press the p button to view other information on the screen, or to hide the information. For details on the information displayed, see p. 226. No information is displayed Simple Information Display Detailed Information Display Enables you to check the focus (p. 143)* *Not shown for movies. • Switching display modes by pressing the p button is also possible immediately after you shoot, while your shot is displayed.
Viewing RGB Histogram To view an RGB histogram, press the o RGB Histogram button in detailed information display. The RGB histogram shows the distribution of shades of red, green, and blue in an image. The horizontal axis represents R, G, or B brightness, and the vertical axis, how much of the image is at that level of brightness. Viewing this histogram enables you to check image color characteristics. Press the o button again to return to detailed information display.
Viewing Zoom in or out, or view other image areas. As you examine the focus, use the zoom lever to zoom in or out. Press the opqr buttons to adjust the display position. Press the n button to restore the original display in step 1.
Browsing and Filtering Images Still Images Movies Navigating Through Images in an Index By displaying multiple images in an index, you can quickly find the images you are looking for. Display images in an index. Move the zoom lever toward g to display images in an index. Moving the lever again will increase the number of images shown. To display fewer images, move the zoom lever toward k. Fewer images are shown each time you move the lever. Choose an image.
Browsing and Filtering Images Filtering Display by , , , or Choose filter conditions. In single-image display, press the d button, Filter Conditions and then press the op buttons to choose a search filter (jump method). When filtering by , , or , press the qr buttons to choose a filter condition. Turn the 7 dial to view only those images that match your filter conditions. Press the n button to restore singleimage display. View the filtered images.
Browsing and Filtering Images Jumping by or Images Choose a jump method in single-image display by pressing the d button and then pressing the op buttons. Press the qr buttons to use the specified jump method. Press the n button to restore singleimage display. Using the Front Dial to Jump Turn the front dial to jump images using the , , and functions. Choose a jump method in single-image display by turning the z dial and then pressing the op buttons.
Browsing and Filtering Images Still Images Viewing Individual Images in a Group Grouped images shot in mode (p. 89) are generally displayed together, but they can also be viewed individually. Choose an image group. Press the qr buttons or turn the 7 dial to choose an image labeled press the m button. , and then View individual images in the group. Pressing the qr buttons or turning the 7 dial will display only images in the group. Pressing the d button will display [Display all images].
Image Viewing Options Still Images Magnifying Images Magnify an image. Moving the zoom lever toward k will zoom in and magnify the image. You can magnify images up to about 10x by continuing to hold the zoom lever. To zoom out, move the zoom lever toward g. You can return to single-image display by continuing to hold it. Move the display position and switch images as needed. Approximate Position of Displayed Area To move the display position, press the opqr buttons.
Image Viewing Options Still Images Movies Viewing Slideshows Automatically play back images from a memory card as follows. Access the setting screen. Press the n button and choose [Slideshow] on the 1 tab (p. 45). Configure the setting. Choose a menu item to configure, and then choose the desired option (p. 45). Start automatic playback. Press the op buttons or turn the 7 dial to choose [Start], and then press the m button. The slideshow will start a few seconds after [Loading image...
Image Viewing Options Still Images Auto Playback of Similar Images (Smart Shuffle) Based on the current image, the camera offers four images similar to it that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after you have taken many shots, in many kinds of scenes. Choose Smart Shuffle.
Still Images Movies Protecting Images Protect important images to prevent accidental erasure by the camera (pp. 156). Choosing a Selection Method Access the setting screen. Press the n button, and then choose [Protect] on the 1 tab (p. 45). Choose a selection method. Choose a menu item and a setting as desired (p. 45). To return to the menu screen, press the n button. • Protected images on a memory card will be erased if you format the card (pp. 175, 176).
Protecting Images Choosing Images Individually Choose [Select]. Following step 2 on p. 152, choose [Select] and press the m button. Choose an image. Press the qr buttons or turn the 7 dial to choose an image, and then press the m button. is displayed. To cancel protection, press the m button again. is no longer displayed. Repeat this process to specify other images. Protect the images. Press the n button. A confirmation message is displayed.
Protecting Images Selecting a Range Choose [Select Range]. Following step 2 on p. 152, choose [Select Range] and press the m button. Choose a starting image. Press the m button. Press the qr buttons or turn the 7 dial to choose an image, and then press the m button. Choose an ending image. Press the r button to choose [Last image], and then press the m button. Press the qr buttons or turn the 7 dial to choose an image, and then press the m button.
Protecting Images Protect the images. Press the p button to choose [Protect], and then press the m button. • You can also choose the first or last image by turning the 7 dial when the top screen in steps 2 and 3 is displayed. Specifying All Images at Once Choose [All Images]. Following step 2 on p. 152, choose [All Images] and press the m button. Protect the images. Press the op buttons or turn the 7 dial to choose [Protect], and then press the m button.
Still Images Movies Erasing Images You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. Choose an image to erase. Press the qr buttons or turn the 7 dial to choose an image. Erase the images. Press the a button. After [Erase?] is displayed, press the qr buttons or turn the 7 dial to choose [Erase], and then press the m button. The current image is now erased.
Erasing Images Choosing Images Individually Choose [Select]. Following step 2 on p. 156, choose [Select] and press the m button. Choose an image. Once you follow step 2 on p. 153 to choose an image, is displayed. To cancel erasure, press the m button again. is no longer displayed. Repeat this process to specify other images. Erase the images. Press the n button. A confirmation message is displayed. Press the qr buttons or turn the 7 dial to choose [OK], and then press the m button.
Erasing Images Specifying All Images at Once Choose [All Images]. Following step 2 on p. 156, choose [All Images] and press the m button. Erase the images. Press the qr buttons or turn the 7 dial to choose [OK], and then press the m button.
Still Images Movies Rotating Images Change the orientation of images and save them as follows. Choose [Rotate]. Press the n button, and then choose [Rotate] on the 1 tab (p. 45). Rotate the image. Press the qr buttons or turn the 7 dial to choose an image. The image is rotated 90° each time you press the m button. To return to the menu screen, press the n button. • Movies with an image quality of or cannot be rotated. • Rotation is not possible when [Auto Rotate] is set to [Off] (see below).
Rotating Images • Images cannot be rotated when you set [Auto Rotate] to [Off]. Additionally, images already rotated will be displayed in the original orientation. • In Smart Shuffle (p. 151) mode, even if [Auto Rotate] is set to [Off], images shot vertically will be displayed vertically, and rotated images will be displayed in the rotated orientation.
Still Images Movies Image Categories You can tag images as favorites and assign them to My Category (p. 162). By choosing a category in filtered playback, you can restrict the following operations to all of those images. • Viewing (p. 140), Viewing Slideshows (p. 150), Protecting Images (p. 152), Erasing Images (p. 156), Adding Images to Print Orders (DPOF) (p. 212) Tagging Images as Favorites Choose [Favorites]. Press the n button, and then choose [Favorites] on the 1 tab (p. 45). Choose an image.
Image Categories Organizing Images by Category (My Category) You can organize images into categories. Note that images are automatically categorized at the time of shooting, according to shooting conditions. :Images with detected faces, or images shot in I or V mode. :Images detected as , , or in A mode, or images shot in J, O, or mode. : Images shot in , w, S, P, or t mode. Choosing a Selection Method Access the setting screen. Press the n button, and then choose [My Category] on the 1 tab (p. 45).
Image Categories Choose a category. Press the op buttons to choose the category, and then press the m button. is displayed. To cancel selection, press the m button again. is no longer displayed. Repeat this process to choose additional images. Finish the setup process. Press the n button. A confirmation message is displayed. Press the qr buttons or turn the 7 dial to choose [OK], and then press the m button.
Still Images Editing Still Images • Image editing (pp. 164 – 168) is only available when the memory card has sufficient free space. Resizing Images Save a copy of images at a lower resolution. Choose [Resize]. Press the n button, and then choose [Resize] on the 1 tab (p. 45). Choose an image. Press the qr buttons or turn the 7 dial to choose an image, and then press the m button. Choose an image size. Press the qr buttons or turn the 7 dial to choose the size, and then press the m button.
Editing Still Images • Editing is not possible for images saved as • RAW images cannot be edited. in step 3. • Images cannot be resized to a higher resolution. Cropping You can specify a portion of an image to save as a separate image file. Choose [Trimming]. Press the n button, and then choose [Trimming] on the 1 tab (p. 45). Choose an image. Press the qr buttons or turn the 7 dial to choose an image, and then press the m button. Cropping Area Resolution After Cropping Adjust the cropping area.
Editing Still Images • Editing is not possible for images shot at a resolution of resized to (p. 164). • RAW images cannot be edited. (p. 61) or • Images supported for cropping will have the same aspect ratio after cropping. • Cropped images will have a smaller resolution than uncropped images. Changing Image Color Tones (My Colors) You can adjust image colors and then save the edited image as a separate file. For details on each option, see p. 106. Choose [My Colors].
Editing Still Images Correcting Image Brightness (i-Contrast) Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast is also automatically corrected, to make subjects stand out better. Choose from four correction levels, and then save the image as a separate file. Choose [i-Contrast]. Press the n button, and then choose [iContrast] on the 1 tab (p. 45). Choose an image.
Editing Still Images Correcting Red-Eye Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. Choose [Red-Eye Correction]. Press the n button, and then choose [Red-Eye Correction] on the 1 tab (p. 45). Choose an image. Press the qr buttons or turn the 7 dial to choose an image. Correct the image. Press the m button. Red-eye detected by the camera is now corrected, and frames are displayed around corrected image areas.
Movies Editing Movies You can cut movies to remove unneeded portions at the beginning or end. Choose *. Following steps 1 – 3 on p. 140, choose * and press the m button. The movie editing panel and editing bar are now displayed. Movie Editing Panel Specify portions to cut. Press the op buttons to choose or . To view the portions you can cut (identified by Movie Editing Bar on the screen), press the qr buttons or turn the 7 dial to move .
Editing Movies Save the edited movie. Press the op buttons to choose , and then press the m button. Press the opqr buttons or turn the 7 dial to choose [New File], and then press the m button. The movie is now saved as a new file. • To overwrite the original movie with the cut one, choose [Overwrite] in step 4. In this case, the original movie will be erased. • Only [Overwrite] is available when memory cards lack sufficient free space.
7 Setting Menu Customize or adjust basic camera functions for greater convenience 171
Adjusting Basic Camera Functions Functions can be configured on the 3 tab. Customize commonly used functions as desired, for greater convenience (p. 45). Silencing Camera Operations Silence camera sounds and movies as follows. Choose [Mute], and then choose [On]. • Operation can also be silenced by holding down the p button as you turn the camera on. • Sound is not played during movies if you mute camera sounds (p. 140). To restore sound during movies, press the o button.
Adjusting Basic Camera Functions Customizing Sounds Customize camera operating sounds as follows. Choose [Sound Options], and then press the m button. Choose an item, and then press the qr buttons to choose an option. 1, 2 Preset sounds (cannot be modified) 3 Preset sounds Can be changed by using the included software. • The default shutter sound is used in changes to [Shutter Sound]. mode (p. 89), regardless of any Hiding Hints and Tips Hints and tips are normally shown when you choose FUNC.
Adjusting Basic Camera Functions Screen Brightness Adjust screen brightness as follows. Choose [LCD Brightness], and then press the qr buttons to adjust the brightness. • For maximum brightness, press and hold the p button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [LCD Brightness] setting on the 3 tab.) To restore the original brightness, press and hold the p button again for at least one second or restart the camera.
Adjusting Basic Camera Functions Customizing the Start-up Screen Access the [Start-up Image] screen in Playback mode. Press the 1 button. Following the previous procedure, choose [3] and press the m button. Choose one of your shots. Choose an image and press the m button. After [Register?] is displayed, choose [OK] (either press the qr buttons or turn the 7 dial), and then press the m button. • The previous start-up setting is overwritten when you assign a new start-up image.
Adjusting Basic Camera Functions Format the memory card. To begin the formatting process, press the op buttons or turn the 7 dial to choose [OK], and then press the m button. When formatting is finished, [Memory card formatting complete] is displayed. Press the m button. • Formatting or erasing data on a memory card only changes file management information on the card and does not erase the data completely.
Adjusting Basic Camera Functions File Numbering Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers. Choose [File Numbering], and then choose an option. Continuous Images are numbered consecutively (until the 9999th shot is taken/saved) even if you switch memory cards. Auto Reset Image numbering is reset to 0 if you switch memory cards, or when a new folder is created.
Adjusting Basic Camera Functions Lens Retraction Timing The lens is normally retracted for safety about one minute after you press the 1 button in Shooting mode (p. 40). To have the lens retracted immediately after you press the 1 button, set the retraction timing to [0 sec.]. Choose [Lens Retract], and then choose [0 sec.]. Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (p. 40).
Adjusting Basic Camera Functions World Clock To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/ Time setting manually. Before using the world clock, be sure to set the date and time (p. 18) and your home time zone. Specify your destination. Choose [Time Zone], and then press the m button.
Adjusting Basic Camera Functions Date and Time Adjust the date and time as follows. Access the [Date/Time] screen. Choose [Date/Time], and then press the m button. Configure the setting. Press the qr buttons to choose an item, and then adjust the setting, either by pressing the op buttons or turning the 7 dial. Metric/Non-Metric Display Change the unit of measurement shown in the MF indicator (p. 110) and zoom bar (p. 48) from m/cm to ft/in as needed.
Adjusting Basic Camera Functions Access the [Electronic Level] screen. Choose [Electronic Level], and then press the m button. Calibrate the electronic level. Choose [Calibrate] and press the m button. A confirmation message is displayed. Choose [OK], and then press the m button. Resetting the Electronic Level Restore the electronic level to its original state as follows. Note that this is not possible unless you have calibrated the electronic level.
Adjusting Basic Camera Functions Enter a name. Press the opqr buttons or turn the 7 dial to choose a character, and then press the m button to enter it. Up to 63 characters can be used. Press the a button to delete single characters. Turn the z dial or choose or and press the m button to move the cursor. Save the settings. Press the n button. [Accept changes?] is displayed. Press the qr buttons or turn the 7 dial to choose [Yes], and then press the m button.
Adjusting Basic Camera Functions Display Language Change the display language as needed. Access the [Language] screen. Choose [Language ], and then press the m button. Configure the setting. Press the opqr buttons or turn the 7 dial to choose a language, and then press the m button. • You can also access the [Language] screen in Playback mode by pressing and holding the m button and immediately pressing the n button.
Adjusting Basic Camera Functions • The following functions are not restored to default settings. - 3 tab settings [Time Zone] (p. 179), [Date/Time] (p. 180), [Language ] (p. 183), [Video System] (p. 190), and the image assigned to [Start-up Image] (p. 174) - Custom white balance data you have recorded (p. 105) - Colors chosen in Color Accent (p. 82) or Color Swap (p. 83) - Shooting mode chosen in K (p. 72) or (p. 75) mode - Exposure compensation (p. 97) setting - The movie mode (p.
8 Accessories Use included accessories effectively and enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately 185
Tips on Using Included Accessories Effective Battery and Charger Use • Charge the battery on (or immediately before) the day of use Charged batteries gradually lose their charge, even when they are not used. You can easily check the charge state of the battery by attaching the cover so that o is visible on a charged battery, and attaching it so that o is not visible on an uncharged battery. • Long-term battery storage After using up all remaining battery power, remove the battery from the camera.
Optional Accessories • The battery charger and AC adapter kit can be used in areas with 100 – 240 V AC power (50/60 Hz). • For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery. Flash Units Speedlite 580EX II/430EX II/320EX/270EX II Shoe-mounted flash unit that enables many styles of flash photography.
Optional Accessories Off-Camera Shoe Cord OC-E3 Used to attach a Macro Twin Lite flash to the camera. Bracket BKT-DC1 Used to attach a Macro Twin Lite flash to the camera. Macrolite Adapter MLA-DC1 Used to attach a Macro Ring Lite or Macro Twin Lite flash to the camera. Other Accessories Soft Case SC-DC75 Protects the camera from dust and scratches. Handle with care to prevent leather discoloration. Waterproof Case WP-DC44 For underwater photography at depths of up to 40 meters (130 ft.).
Optional Accessories Stereo AV Cable AVC-DC400ST Connect the camera to a TV to enjoy playback on the larger TV screen. Remote Switch RS60-E3 Enables remote shutter button operation (pressing the button halfway or all the way down). Lens Hood LH-DC70 Prevents extraneous light outside the angle of view from entering the lens and causing flares or ghosting, which reduce image quality. Filter Adapter FA-DC58C Adapter required when mounting a 58 mm filter. Canon Lens Filter (58 mm dia.
Using Optional Accessories Still Images Movies Playback on a TV By connecting the camera to a TV, you can view your shots on the larger screen of the TV. For details on connection or how to switch inputs, refer to the TV manual. • Some information may not be displayed when viewing images on a TV (p. 228).
Using Optional Accessories Turn the camera on. Press the 1 button to turn the camera on. Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.) When finished, turn off the camera and TV before disconnecting the cable. • Correct display is not possible unless the camera video output format (NTSC or PAL) matches the TV format. To change the video output format, press the n button and choose [Video System] on the 3 tab.
Using Optional Accessories Display images. Follow steps 3 – 4 on p. 190 to display images. • Camera operating sounds are not played while the camera is connected to an HDTV. Controlling the Camera with a TV Remote Connecting the camera to an HDMI CEC-compatible TV enables playback (including slideshow playback) using the TV remote control. In this case, you will need to adjust some TV settings. For details, refer to the TV user manual. Configure the settings.
Using Optional Accessories Camera Control Panel Options Shown on the TV . Return Closes the menu. Group Playback Displays sets of images shot in mode (p. 89). (Only displayed when a grouped image is selected.) Play Movie Starts movie playback. (Only displayed when a movie is selected.) Slideshow Starts slideshow playback. To switch images during playback, press the qr buttons on the remote control. Index Playback Displays multiple images in an index. l Change Display Switches display modes (p.
Using Optional Accessories Insert the coupler. Follow step 2 on p. 15 to open the cover, and then insert the coupler as shown until it locks into place. Close the cover ( ) making sure the coupler cable fits into the coupler cable port ( ) and press downward until it clicks into place. Coupler Cable Port Connect the power cord. Insert one end of the power cord into the compact power adapter, and then plug the other end into a power outlet. Turn the camera on and use it as desired.
Using Optional Accessories Still Images Movies Using a Lens Hood (Sold Separately) For wide-angle shots of backlit subjects without using the flash, attach optional Lens Hood LH-DC70 to prevent light outside the angle of view from entering the lens. Attach the hood. Align the lens hood mark ( ) with the camera mark ( ), and turn the lens hood in the direction of the arrow until it locks in place. To remove the lens hood, turn it the opposite direction.
Using Optional Accessories Still Images Movies Using Lens Filters (Sold Separately) Attaching a lens filter to the camera protects the lens and allows you to shoot with various effects. To attach a lens filter, you will need Filter Adapter FA-DC58C (sold separately). Attach the filter adapter. Align the notches on the camera and the filter adapter and turn the adapter in the direction of the arrow until locked. To remove the filter adapter, turn it in the opposite direction. Attach a filter.
Using Optional Accessories Still Images Using a Remote Switch (Sold Separately) An optional Remote Switch RS60-E3 can be used to avoid camera shake that may otherwise occur when pressing the shutter button directly. This optional accessory is convenient when shooting at slow shutter speeds. Connect the remote switch. Make sure the camera is off. Open the terminal cover and insert the remote switch plug. Shoot. To shoot, press the release button on the remote switch.
Using Optional Accessories Still Images Movies Speedlite 580EX II/430EX II/320EX/270EX II These optional flash units can provide bright lighting and meet a variety of flash photography needs. Attach the flash unit to the hot shoe. Turn the flash on, and then turn the camera on. A red h icon is now displayed. The flash pilot lamp will light up when the flash is ready. Choose shooting mode G, M, B, or D. Flash settings can only be configured in these modes.
Using Optional Accessories • Settings for the built-in flash cannot be configured while a Speedlite EX series flash is attached, because that setting screen is no longer accessible. • You can also access the setting screen by pressing the r button for at least one second. • Flash settings in shooting mode can be configured just as they are in G mode. • 580EX II only: [Flash Control] is not available if the external flash has been set up for stroboscopic flash.
Using Optional Accessories Attach the macrolite adapter. Align the mark on the macrolite adapter with the mark on the camera, and then turn the adapter in the direction of the arrows until it locks in place. To remove the adapter, hold down the ring release button and turn the adapter in the opposite direction. Attach the controller to the camera. Attach the control component of the macro ring lite to the hot shoe on top of the camera. Attach the flash unit to the macrolite adapter.
Using Optional Accessories Set [ND Filter] to [On] (p. 103). Configure the external flash. Follow step 5 on p. 198 to adjust the settings. • Keep cords (from the macro ring lite) away from flash heads. • When using a tripod, adjust the position of the legs to prevent them from coming into contact with the flash heads. • Use the screen to compose shots, because the viewfinder cannot be used with these accessories attached.
Using Optional Accessories Attach the bracket to the camera. Slide the other bracket screw to the outer end of the bracket. Align the bracket screw with the tripod socket on the bottom of the camera, and then tighten the screw to secure it. Attach the off-camera shoe cord to the camera. Attach the camera connection component of the off-camera shoe cord to the hot shoe on top of the camera. Attach the controller to the offcamera shoe cord.
Using Optional Accessories Configure the external flash and settings on the camera. Follow steps 5 – 9 on p. 200 to configure the settings. • Keep cords (from the macro twin lite and off-camera shoe cord) away from flash heads. • When using a tripod, adjust the position of the legs to prevent them from coming into contact with the flash heads or the bracket. • Depending on the position where you have attached the flash controller, it may come into contact with the LCD monitor.
Using Optional Accessories Still Images Camera Settings Available with an External Flash (Sold Separately) The following settings are available in G, M, B, or D mode. In other shooting modes, only [Red-Eye Corr.] and [Red-Eye Lamp] can be configured. (The flash is adjusted and fired automatically, as needed.) Item Flash Mode Flash Exp. Comp*3 Flash Output*4 Shutter Sync. Slow Synchro Wireless Func.
Using Optional Accessories *6 For options other than On/Off, configure the setting on the flash unit itself. Not available with Speedlite 430EX II/320EX/270EX II, Macro Ring Lite MR-14EX, or Macro Twin Lite MT-24EX. When this setting is set to [On], [Shutter Sync.] cannot be set to [2ndcurtain]. (If [Shutter Sync.] is set to [2nd-curtain], it will be changed to [1st-curtain].) *7 Can only be configured when [Flash Mode] is [Auto]. *8 Restores all default settings.
Still Images Movies Printing Images Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare or print images for photobooks. A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Printing Images is displayed. Choose an image. Press the qr buttons or turn the 7 dial to choose an image. Print the image. Press the c button. Printing now begins. To print other images, repeat steps 5 – 6 after printing is finished. When you are finished printing, turn the camera and printer off and disconnect the interface cable. • For Canon PictBridge-compatible printers (sold separately), see p. 189. • RAW images cannot be printed.
Printing Images Default Date File No. Both Off Default Matches current printer settings. Prints images with the date added. Prints images with the file number added. Prints images with both the date and file number added. — Matches current printer settings. Off — On Uses information from the time of shooting to print under optimal settings. Red-Eye 1 No. of Copies Corrects red-eye. Choose the number of copies to print. Trimming — Specify a desired image area to print (see below).
Printing Images Print the image. On the screen in step 1, press the op buttons or turn the 7 dial to choose [Print], and then press the m button. • Cropping may not be possible at small image sizes, or at some aspect ratios. • Dates may not be printed correctly if you crop images shot with [Date Stamp] selected. Choosing Paper Size and Layout Before Printing Choose [Paper Settings]. After following step 1 on p. 207 to access the printing screen, choose [Paper Settings] and press the m button.
Printing Images Choose a layout. Press the op buttons or turn the 7 dial to choose an option. When choosing [N-up], press the qr buttons to specify the number of images per sheet. Press the m button. Print the image. Available Layout Options Default Matches current printer settings. Bordered Prints with blank space around the image. Borderless Borderless, edge-to-edge printing. N-up Choose how many images to print per sheet. ID Photo Prints images for identification purposes.
Printing Images Choose the printing area. Follow step 2 on p. 208 to choose the printing area. Print the image. Movies Printing Movie Scenes Access the printing screen. Follow steps 1 – 5 on p. 206 to choose a movie, and then press the m button. Press the qr buttons to choose c, and then press the m button. The screen at left is displayed. Choose a printing method. Press the op buttons or turn the 7 dial to choose , and then press the qr buttons to choose the printing method. Print the image.
Printing Images Still Images Adding Images to Print Orders (DPOF) Batch printing (p. 215) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform DPOF (Digital Print Order Format) standards. • RAW images cannot be included in print orders.
Printing Images Configuring Print Settings Specify the printing format, whether to add the date or file number, and other settings as follows. These settings apply to all images in the print order. Press the n button, and then choose [Print Settings] on the 2 tab. Choose and configure settings as desired (p. 45). Standard Print Type Date File No. Clear DPOF data One image is printed per sheet. Index Smaller versions of multiple images are printed per sheet.
Printing Images Setting Up Printing for Individual Images Choose [Select Images & Qty.]. Press the n button, choose [Select Images & Qty.] on the 2 tab, and then press the m button. Choose an image. Press the qr buttons or turn the 7 dial to choose an image, and then press the m button. You can now specify the number of copies. If you specify index printing for the image, it is labeled with a icon. To cancel index printing for the image, press the m button again. is no longer displayed.
Printing Images Configure the print settings. Press the op buttons to choose [Order], and then press the m button. Setting Up Printing for All Images Choose [Select All Images]. Following step 1 on p. 214, choose [Select All Images] and press the m button. Configure the print settings. Press the qr buttons or turn the 7 dial to choose [OK], and then press the m button. Clearing All Print Orders Choose [Clear All Selections]. Following step 1 on p.
Still Images Movies Using an Eye-Fi Card Before using an Eye-Fi card, always confirm that local use is permitted (p. 3). Inserting a prepared Eye-Fi card enables automatic wireless transfer of images to a computer or uploading to a photo-sharing website. Images are transferred by the Eye-Fi card. Refer to the card’s user manual or contact the manufacturer for instructions on preparing and using cards or resolving transfer problems. • When using an Eye-Fi card, keep the following points in mind.
Using an Eye-Fi Card • Power saving (p. 40) on the camera is temporarily disabled during image transfer. • Choosing mode will interrupt the Eye-Fi connection. Although the Eye-Fi connection will be restored after you choose another shooting mode or enter Playback mode, the camera may transfer any movies made in mode again. Checking Connection Information Check the access point SSID used by the Eye-Fi card or the connection status, as needed.
Using an Eye-Fi Card 218
9 Appendix Helpful information when using the camera 219
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Power Nothing happens when the ON/OFF button is pressed. • Confirm that you are using the correct type of battery, and that there is sufficient charge (p. 227). • Confirm that the battery is inserted facing the correct way (p. 15). • Confirm that the memory card/battery cover is fully closed (p. 16).
Troubleshooting h flashes on the screen when the shutter button is pressed, and shooting is not possible (p. 51). is displayed when the shutter button is pressed halfway (p. 50). • • • • Set [IS mode] to [Continuous] (p. 124). Raise the flash and set the flash mode to h (p. 120). Increase the ISO speed (p. 99). Mount the camera on a tripod or take other measures to keep it still. In this case, set [IS Mode] to [Off] (p. 124). Shots are out of focus.
Troubleshooting Shots look grainy. • Lower the ISO speed (p. 99). • High ISO speeds in some shooting modes may cause grainy images (p. 74). Subjects are affected by red-eye (p. 62). • Set [Red-Eye Lamp] to [On] (p. 69) to activate the red-eye reduction lamp (p. 4) in flash shots. For best results, have subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor scenes and shooting at closer range. • Edit images using red-eye correction (p. 168).
Troubleshooting Playback stops, or audio skips. • Switch to a memory card that you have performed low-level formatting on with the camera (p. 176). • There may be brief interruptions when playing movies copied to memory cards that have slow read speeds. • When movies are played on a computer, frames may be dropped and audio may skip if computer performance is inadequate. Computer Cannot transfer images to a computer.
On-Screen Messages If an error message is displayed, respond as follows. No memory card • The memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way (p. 16). Memory card locked • The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the locked position. Switch the write-protect tab to the unlocked position (p. 15). Cannot record! • Shooting was attempted without a memory card in the camera.
On-Screen Messages Exceeded selection limit • More than 998 images were selected for Print Order (p. 212). Choose 998 images or less. • Print Order (p. 212) settings could not be saved correctly. Reduce the number of selected images and try again. • You attempted to choose more than 500 images in Protect (p. 152), Erase (p. 156), Favorites (p. 161), My Category (p. 162), or Print Order (p. 212). Communication error • An excessive amount of images (approx.
On-Screen Information Shooting (Information Display) Battery level (p. 227) Camera orientation* White balance correction (p. 105) My Colors (p. 106) AEB shooting (p. 101) / Focus bracketing (p. 119) Drive mode (p. 108) Eye-Fi connection status (p. 216) Metering method (p. 98) Still image compression (p. 62), Resolution (p. 61) Histogram (p. 142) Recordable shots Self-timer (p. 56) Movie quality (p. 64) Focal length (p. 109) Remaining time 226 Digital zoom magnification (p. 55), Digital tele-converter (p.
On-Screen Information * : Regular orientation, : Held vertically The camera detects the shooting orientation and adjusts settings for optimal shots. Orientation is also detected during playback, and in either orientation, the camera automatically rotates images as needed. However, the orientation may not be detected correctly when the camera is pointed straight up or down. Battery Level An on-screen icon or message indicates the battery charge level.
On-Screen Information Playback (Detailed Information Display) Switch display (RGB histogram) (p. 143) My Category (p. 162) Exposure compensation level (p. 97), Exposure shift level (p. 92) ND filter (p. 103) White balance (p. 104), White balance correction (p. 105), Mercury lamp correction (p. 63) Histogram (p. 142) Print order (p. 212) ISO speed (p. 99), Playback speed (p. 79) Shooting mode (p. 230) Transferred via Eye-Fi (p. 216) Battery level (p. 227) Metering method (p.
On-Screen Information Summary of Movie Control Panel in “Viewing” (p. 140) Exit Play Slow Motion (To adjust the playback speed, press the qr buttons or turn the 7 dial. No sound is played.) Skip Backward* (To continue skipping backward, keep holding down the m button.) Previous Frame (For fast-rewind, keep holding down the m button.) Next Frame (For fast-forward, keep holding down the m button.) Skip Forward* (To continue skipping forward, keep holding down the m button.) * Edit (p.
Functions and Menu Tables Functions Available in Each Shooting Mode K Shooting Mode D BM G A I J V Function Exposure Compensation (p. 97) ISO Speed (p. 99) – White Balance Correction (p. 105) *1 *1 — — *1 *1 — *1 *1 *1 *1 — — — — — — — — — *1 *1 — — — h Z *1 *1 *1 *1 — — — *4 — *5 — ! *1 *1 Metering Method (p.
Functions and Menu Tables K E w S O P t x T v Y — — — — — — — — — — — — — — — — — — — — — — — — — — — *2 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — E — — — — — — — — — — — — — — — — — — — — — — — — — — —
Functions and Menu Tables K Shooting Mode D BM G A I J V Function White Balance (p.
Functions and Menu Tables K E w S O P t x T v Y E — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Functions and Menu Tables 4 Shooting Menu K Shooting Mode D BM G A I J V Function AF Frame (p. 112) Digital Zoom (pp. 55, 111) AF-Point Zoom (p. 67) Servo AF (p. 116) Continuous AF (p. 117) AF-assist Beam (p. 69) MF-Point Zoom (p. 110) Safety MF (p. 110) Face AiAF *1 *1 Tracking AF FlexiZone/Center*2 *1 *1 *1 *2 *1 — — Standard *1 *1 Off *1 *1 Digital Tele-converter 1.
Functions and Menu Tables K E w S O P t — — — — — x T v Y — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — E
Functions and Menu Tables K Shooting Mode D BM G A I J V Function Hg Lamp Corr. (p. 63) Spot AE Point (p. 98) Safety Shift (p. 129) Wind Filter (p. 65) Review (p. 70) On/Off* Center — *1 — — *1 — — AF Point *1 *1 — — — — — — On Off *1 *1 *1 *1 — — — — — — — — — — — — — — — On *1 *1 Off Off *1 *1 *1 *1 2 sec.
Functions and Menu Tables K E w S O P t x T v Y E — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Functions and Menu Tables 3 Set up Menu Item Ref. Page Item Ref. Page Mute p. 172 Time Zone Volume p. 172 Date/Time p. 19 Sound Options p. 173 Distance Units p. 180 Hints & Tips p. 173 Electronic Level p. 180 LCD Brightness p. 174 Video System p. 191 Start-up Image p. 174 Ctrl via HDMI p. 192 Eye-Fi Settings p. 216 p. 181 Format pp. 175, 176 p. 179 File Numbering p. 177 Copyright Info Create Folder p. 177 Language p. 20 Lens Retract p. 178 Reset All p.
Functions and Menu Tables 1 Playback Menu Item Movie Digest Playback Ref. Page p. 147 Item Ref. Page Red-Eye Correction p. 168 Smart Shuffle p. 151 Trimming p. 165 Slideshow p. 150 Resize p. 164 Erase p. 156 My Colors p. 166 Protect p. 152 Scroll Display p. 141 Rotate p. 159 Group Images p. 148 Favorites p. 161 Auto Rotate p. 159 My Category p. 162 Resume p. 141 i-Contrast p. 167 Transition p. 141 2 Print Menu Item Print Ref. Page — Item Ref.
Handling Precautions • The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact. • Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data. • If water droplets or dirt adheres to the camera or screen, wipe with a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply force. • Never use cleaners containing organic solvents to clean the camera or screen.
Index A AC adapter kit.......................................... 193 Accessories ............................................. 186 AEB mode ............................................... 101 AE lock ...................................................... 97 AF frames ............................ 22, 49, 112, 114 AF Focusing AF lock..................................................... 118 Aspect ratio................................................ 60 AUTO mode (shooting mode)........
Index Servo AF........................................... 116 Focusing range Macro................................................ 109 Manual focus .................................... 110 Focus lock ............................................... 113 FUNC. menu Basic operations ................................. 44 H Handheld nightscene (shooting mode)...... 73 High dynamic range (shooting mode) ....... 76 High-speed burst HQ (shooting mode)...... 89 Household power ....................................
Index Shadow Correct....................................... 103 Shooting Shooting date/time Date/time Shooting information................. 132, 226 Slideshow ................................................ 150 Smart Shuffle........................................... 151 Smart Shutter (shooting mode) ................. 86 Smile (shooting mode)............................... 86 Snow (shooting mode)............................... 74 Software DIGITAL CAMERA Solution Disk ......... 2 Installation.............
Trademark Acknowledgments • The SDXC logo is a trademark of SD-3C, LLC. • This device incorporates exFAT technology licensed from Microsoft. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • The iFrame logo and the iFrame symbol are trademarks of Apple INC.
Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products. CEL-SS6AA210 © CANON INC.