G5_QuickStart

Step 2
Shooting
1.
Open the LCD monitor, turn the mode lever to
(shooting)
while pressing the release button and turn the mode dial
to
.
The Power/Mode indicator lights orange.
2.
Set the date and time. (first time the camera is powered on)
Use the or arrow on the omni selector to select the items you wish to set,
and use the or arrow on the omni selector to change the value.
To put the settings into effect, press the button.
3.
Focus.
Point the camera in the direction of the subject you wish to shoot and press the
shutter button halfway. The camera beeps twice when the subject is in focus.
4.
Shoot.
Press the shutter button fully. The shutter sound will sound once when the shot
has been taken. The recorded image is displayed on the LCD monitor for
approximately 2 seconds.
This guide explains the required operations the first time the camera is used, how to download images
to a computer, as well as connecting to a printer for direct printing. For more information about
handling precautions and detailed instructions, please refer to the manuals listed above.
Please refer to the Troubleshooting section of the Software Starter Guide if you have trouble installing the software or downloading
images.
Do not connect the camera to the computer before the software is installed.
Step 1
Preparing the Camera
1.
Install the battery pack.
Slide the battery cover in the direction the
arrows to open it. Press the battery lock
while inserting the battery pack all the way in
and close the battery cover.
2.
Charge the battery pack.
Connect the Compact Power Adapter to the
camera as shown on the illustration.
The indicator beside the viewfinder will blink
orange while the battery pack is charging
and will light steady once charging is
complete.
• It takes approximately 80 minutes to
charge the battery pack.
• Once charging is complete, disconnect the
compact power adapter from the camera.
3.
Install the CF card.
Slide the CF card slot cover in the direction of
the arrow and lift it open.
Insert the CF card with its label facing up
until the CF card eject button fully extends
and close the CF card slot cover.
Step 3
Reviewing an Image
1.
Turn the mode lever to while pressing the release button.
The power/mode indicator lights green.
The last recorded image appears in the LCD monitor.
2.
View the images.
Use the or arrow on the omni selector to display
the image you wish to see.
2.
When the confirmation screen appears, check
that [Erase] is selected and press the
button.
Select [Cancel] using the or arrow on the omni selector to
cancel without erasing.
CDI-E077-010 XX02XXXX © 2003 CANON INC. PRINTED IN JAPAN
Turn off the power.
Press the button. Even if you do not press the button, the power will
automatically shut down 3 minutes after the last control is accessed.
To Delete an Unwanted Image
1.
Select the unwanted image using the or
arrow on the omni selector and press the
button.
Continued on the reverse side.
Handling precautions
Camera's detailed operations
➜ Camera User Guide
Software operations
➜ Software Starter Guide
Detailed software operations
➜ ZoomBrowser EX Software User Guide (Windows
®
)
➜ ImageBrowser Software User Guide (Macintosh)
(These PDF format manuals are available on the
Canon website. Please download them from the
following URL: http://web.canon.jp/Imaging/
information-e.html)
ENGLISH
1
2
CF Card Eject Button
To Power Outlet
Compact Power Adapter
Shutter Button
The shutter
button features a
two-stage action.