Direct Print User Guide You don’t even need a computer ! Just connect your camera to your printer and print CDI-E283-010 XXXXXXX © 2007 CANON INC.
ENGLISH Introduction —Confirm Your Printer Model and the Section that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camera to the printer with an appropriate cable and confirm the icon displayed in the camera's LCD monitor. • For instructions on camera and printer connection methods, please refer to page 8.
Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model and the paper size (unavailable settings will not appear in the menu). For details, refer to the user guide that came with your printer. Confirm your printer model. Read the page below.
For the latest information regarding connections between Canon printers and cameras, please refer to the following URL: http://web.canon.jp/Imaging/BeBit-e.html http://www.canon.com/pictbridge PictBridge Compliance This camera complies with the industry standard “PictBridge”*. This allows you to also connect your camera to non-Canon PictBridge compliant printers and print images with simple operations using the camera buttons.
Table of Contents Direct Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Allows for Printing without the Use of a Computer . . . . 6 Various Printing Operations Can Be Performed . . . . . . . 6 You Can Also Perform the Following Printing Operations . .7 Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . . 7 Printing Multiple Images on a Sheet of Paper . . . . . . . . . 7 ID Photo Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing with Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge . . . . . . . . . . . . . . . . . 32 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Print after Changing the Print Settings . . . . . . . . . . . . . .33 Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .35 Setting the Date and the File Number Printing Option . .
Printing with Bubble Jet Printers using Bubble Jet Direct . .71 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Settings that Can Be Set with the Camera. . . . . . . . . . . . . . . . .74 SELPHY ES Series/SELPHY CP Series Printers using PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Bubble Jet Printers (PIXMA Series/SELPHY DS Series) using PictBridge. . . . . .
Direct Print Allows for Printing without the Use of a Computer Connect your camera to the printer with the appropriate cable. Image selection and printing is operated from the camera. Various Printing Operations Can Be Performed* Prints to cover the entire surface of the paper. Or, prints with a border. 09/09/2007 Add the date. Specify which portion of the image to print. (Trimming) Multiple pictures can be printed at once.
You Can Also Perform the Following Printing Operations Printing Movies (Movie Print) You can print a single frame of movies or extract movie frames at fairly regular intervals and print them on a single sheet of paper (pp. 25, 46, 64). • Capable printers (This function is not available on some printers.
Connecting the Camera to the Printer Connect the camera to the printer. For instructions on printer and camera operation methods, refer to their respective user guides. Set one of the following into the camera. • Compact power adapter (sold separately) • Fully charged battery • New batteries Place paper, ink cassette/cartridge, etc. into the printer. Connect the camera to the printer with the appropriate interface cable supplied with the camera.
Disconnecting the Camera and the Printer Turn the power off. Detach the cable. Pull out the cable while holding the connector plug. Do not pull out by the cable.
Printing with SELPHY ES Series/ SELPHY CP Series Printers using PictBridge Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. 1 2 10 Make sure that displays in the upper left corner of the LCD monitor. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 11).
Print after Changing the Print Settings You can change the print settings before printing. Make sure that displays in the upper left corner of the LCD monitor. 1 If displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53). Sets the print effect (p. 14) Sets the date and the file number for printing (p. 13) 2 Display the images you wish to print and press the FUNC./ SET button. The print order screen appears. Sets the number of copies (p.
• You cannot print incompatible RAW images. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the FUNC./SET button. A confirmation dialog will display. Select [OK] and press the FUNC./SET button. The printer will stop printing the current image and eject the paper.
Selecting Print Settings Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. Setting the Date and the File Number Printing Option Select [ ], then select the date and the file number printing option. You can set the date and the file number printing as follows: Date 1 Prints only the date. File No. Prints only the file number.
Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. Default Print effects will differ according to your printer’s settings. Refer to your printer’s user guide for details. On Uses the camera’s shooting information to deliver optimum prints. Off Prints without any effects. Red-Eye1 Prints with red-eye corrected. Select [ ] and choose a print effect option.
Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the FUNC./SET button. The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
When screen a displays Trim the image. 2a Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
When screen b displays Trim the image. 2b Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
• The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
Selecting the Paper Settings Select [Paper Settings] and press the FUNC./SET button. 1 The paper size setting screen appears. Select a paper size* and press the FUNC./SET button. 2 The default settings and specified paper cassette size are displayed. The paper type setting screen appears. * Paper sizes vary according to region. Press the FUNC./SET button. The page layout screen appears.
Select a layout. The following layout can be selected. 4 Default Print effects will differ according to your printer’s settings. Refer to your printer’s user guide for details. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4 or (8*) images on a single sheet of paper (p. 21). ID Photo Specifies the print size and print portion of an image as an ID photo (p. 22). Fixed Size Prints by specifying the print size of the image on a sheet of paper (p.
Printing Multiple Images on a Sheet of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. 2 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper. 8* 8 images (height 4 x width 2) of the same dimensions are arranged on a single sheet of paper or a label sheet.
Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) will allow you to specify the print size and print portion of an image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo. Refer to the party (organization) or administration requiring the photo. The print size can be specified for only L (Large) resolution images in the camera connected to the printer.
z Selectable combination : Available print size Short Side Long Side 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.5 inch 1.8 inch 2.0 inch 1.8 inch 2.0 inch T Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (pp. 16, 17, 18) on how to trim the image. Trimming Frame The trimming setting screen differs depending on the camera model.
Printing Images in the Fixed Size Selecting [Fixed Size] in the layout setting (p. 20) will allow you to print by specifying the print size of the image on a sheet of paper. Select the fixed print size required. Depending on the paper size, you can select print sizes as follows: Paper size 5 24 Print size Credit Card You cannot select the print size. 9 × 13 cm (L size) 89 mm × 55 mm Default 10 × 14.8 cm (Postcard size) 7 cm × 10 cm Default 4 in. × 8 in./ 10 × 20 cm (Wide size) 4 in. × 6 in.
Printing Movies (Movie Print) Select the movie you want to print, then press the FUNC./ SET button. 1 The movie control panel appears. If you press the button instead of the FUNC./SET button, movie print begins. Single-frame You can choose a single frame from a movie and print it on a sheet of paper. Display the frame you wish to print on the LCD monitor, select (Print), then press the FUNC./SET button.
5 Select [Print] and press the FUNC./SET button. Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Select (Print) and press the FUNC./SET button. 2 Movie Control Panel Select and choose [Sequence]. 3 If necessary, select [On], [Off] or [Default] in (Caption). If you set (Caption) to [On], you can print the file number and the elapsed time of the frame at the same time. Selecting [Paper Settings] and pressing the FUNC.
• The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.
Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide. In this section, we will explain how to print images after specifying them. In the (Print) menu, select [Print] and press the FUNC./ SET button.
• To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print in Step 2. • When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time. • The ID photo print function cannot be used. • You cannot print movies. • The maximum number of images printed on one page in the Index print type depends on the selected paper size.
Cancel Printing • To cancel printing between images printed, press the FUNC./ SET button. A confirmation dialog appears. Select [OK] and press the FUNC./SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the FUNC./SET button. The remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting.
List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly. No Ink The ink cartridge has not been inserted or has run out of ink.
Printing with Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. 1 2 32 Make sure that displays in the upper left corner of the LCD monitor. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 33).
Print after Changing the Print Settings You can change the print settings before printing. Make sure that displays in the upper left corner of the LCD monitor. 1 If displays on the LCD monitor, please refer to Printing with Bubble Jet Printers using Bubble Jet Direct (p. 71). Sets the print effect (p. 36) Sets the date and the file number for printing (p. 35) 2 Display the images you wish to print and press the FUNC./ SET button. The print order screen appears. Sets the number of copies (p.
• You cannot print incompatible RAW images. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the FUNC./SET button. A confirmation dialog will display. Select [OK] and press the FUNC./SET button. The printer will stop printing the current image and eject the paper.
Selecting Print Settings Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. • On printers equipped with an operation panel, you can change the settings for those items set to [Default] using the printer's operation panel. Setting the Date and the File Number Printing Option Select [ ], then select the date and the file number printing option.
If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [Date], [File No.] or [Both], the date/file number will be printed on the embedded information which is also printed. Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects.
Setting the Number of Copies Select [ ] and set the number of prints. 1 1 to 99 copies can be set.
Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 42) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the FUNC./SET button. The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
When screen a displays Trim the image. 2a Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
When screen b displays Trim the image. 2b Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
• The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
Selecting the Paper Settings Select [Paper Settings] and press the FUNC./SET button. 1 The paper size setting screen appears. Select a paper size and press the FUNC./SET button. 2 The following paper sizes* are available: 4" × 6", 5" × 7", 13 × 18 cm, 8.5" × 11", A4, CreditCard, 8" × 10", 10" × 12", A3, A3+/13" × 19", 14" × 17", 4" × 7.1", 12 cm DVD/CD and Default. The paper type setting screen appears. * Paper sizes vary according to region. Select a paper type and press the FUNC./SET button.
Select a layout. The following layout can be selected. Default 4 Print effects will differ according to your printer’s settings. Refer to your printer’s user guide for details. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4, 9 or 16 images on a single sheet of paper (p. 44) Prints the shooting Bordered information* onto a blank sheet of paper (size L or larger). Prints DPOF print set 20-up images in sets of 20 images onto A4 size paper.
Printing Multiple Images on a Sheet of Paper • Selecting [4" x 6"] in the paper size setting (p. 42) will allow you to specify the following layout settings. 2 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper. 9 9 images (height 3 x width 3) of the same dimensions are arranged on a single sheet of paper.
5 Select a layout and press the FUNC./SET button. This ends the paper settings operations. The display returns to the print order screen. • Images will print with borders, even if [Borderless] was selected with the camera in the following cases: •When [Plain] is selected in the camera's [Paper Type] (cannot be selected depending on the connected printer model) •With printers equipped with an operation panel, when [Plain] is selected with the printer and [Default] is selected in the camera's [Paper Type].
Printing Movies (Movie Print) You can choose a single frame from a movie and print it on a sheet of paper. Select the movie you want to print, then press the FUNC./ SET button. 1 The movie control panel appears. If you press the button instead of the FUNC./SET button, movie print begins. Display the frame you wish to print on the LCD monitor, select (Print), then press the FUNC./SET button.
Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide. In this section, we will explain how to print images after specifying them. In the (Print) menu, select [Print] and press the FUNC./ SET button.
• To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date in Step 2. • When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer. • Depending on the printer, the [File No.] cannot be printed when the print type is set to [Standard]. • You cannot print movies.
Cancel Printing • Press the FUNC./SET button to cancel while printing. A confirmation dialog appears. Select [OK] and press the FUNC./ SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the FUNC./SET button. The remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting.
List of Messages The following messages may appear on the camera LCD monitor if an error occurs during a camera and printer connection. (Depending on the printer, some messages may not appear.) • Please refer to the printer’s user guide for the appropriate remedies. : Printing restarts if you select [Continue] and press the FUNC./SET button. For the remedies to other messages that might appear, refer to your printer’s user guide. 50 No Paper There is no paper set in the printer.
Printer error Disconnect the cable from the printer and turn off the printer power. Then reconnect the cable and turn on the printer. If the error persists, please request a repair from your nearest Canon Customer Support Center (listed in the contact list provided with the printer). Printer in use The printer is warming up or in use. The printer automatically starts printing the images from the camera after completing the current printing.
Printing with Non-Canon, PictBridge Compliant Printers Printing 1 Make sure that displays in the upper left corner of the LCD monitor. After this step, follow the procedures in the section Printing with Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge (p. 32) to print your images. However, the following menu options cannot be set. • Print Effect (p. 36): [Vivid], [NR], [Vivid+NR], [Face ], [RedEye1], [Red-Eye2] • Paper Size (p. 42): [5" × 7"] or [13 ×18cm] • Paper Type (p.
Printing with SELPHY CP Series Printers using Canon Direct Print If you use Canon Compact Photo Printer SELPHY CP750/CP740/CP730/CP720/CP710/ CP510 In the following cases, select from [Print Method] in the camera’s [Set up] menu: • When printing (wide) size images shot using a Canon digital camera onto wide-size paper. • When printing images of human subjects after red-eye correction. After this, see Printing with SELPHY ES Series/SELPHY CP Series Printers using PictBridge (p. 10).
Print after Changing the Print Settings You can change the print settings before printing. Make sure that displays in the upper left corner of the LCD monitor. 1 If displays on the LCD monitor, Printing with please refer to SELPHY ES Series/SELPHY CP Series Printers using PictBridge (p. 10). Selects the Number of Copies (p. 55) Display the images you wish to print and press the FUNC./ SET button. The print order screen appears. 2 Sets the Print Style (p. 55) Sets the Printing Area (Trimming) (p.
Cancel Printing • You cannot stop printing when printing only one copy of an image. If you are printing more than one copy or more than one image, you can cancel the rest of the printing by pressing the FUNC./SET button. Once the current print is finished, a confirmation dialog appears. Select [OK] and press the FUNC./ SET button. Printing Errors • An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the FUNC./SET button.
1 In the print order screen, select [Style] and press the FUNC./SET button. Select [Image], [Borders], or [Date]. 2 Select settings as needed. 3 Press the MENU button to end the setting selection process. 4 Print Area Frame With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly. If you have not specified a trimming setting, a frame will appear around the area of the image that will be printed, allowing you to check the portion that will be cropped.
• When printing multiple prints, the [Borders] and the [Date] cannot be set. (Images are printed without any date or borders.) • Practically all of the image area displayed on the LCD monitor is printed on bordered prints. Setting the Printing Area (Trimming) You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings.
When screen a displays Trim the image. 2a Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
When screen b displays Trim the image. 2b Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
• The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
Printing by Specifying the Print Size (ID Photo Print) You can specify the print size and print a portion of an image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo. Refer to the party (organization) or administration requiring the photo. The print size can be specified for only L (Large) resolution images in the camera connected to the printer. 1 2 In the print order screen, select [Style] and press the FUNC./SET button.
z Selectable combination : Available print size Short Side Long Side 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.5 inch 1.8 inch 2.0 inch 1.8 inch 2.0 inch Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (pp. 58, 59) on how to trim the image. 3 Trimming Frame 4 62 The trimming setting screen differs depending on the camera model.
• The print size setting only applies to one image. • The print size setting is canceled with the following operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shape of the trimming frame varies depending on the specified print size. • Use the LCD monitor to specify the print size settings. The trimming frame may not display correctly on a TV screen.
Printing Movies (Movie Print) Select the movie you want to print, then press the FUNC./ SET button. 1 The movie control panel appears. If you press the button instead of the FUNC./SET button, movie print begins. Single-frame You can choose a single frame from a movie and print it on a sheet of paper. Display the frame you wish to print on the LCD monitor, select (Print), then press the FUNC./SET button.
5 Select [Print] and press the FUNC./SET button. Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Select (Print) and press the FUNC./SET button. 2 Movie Control Panel Select and choose [Sequence]. 3 If necessary, select [On] or [Off] in (Caption). 4 5 If you set (Caption) to [On], you can print the file number and the elapsed time of the frame at the same time. Select [Print] and press the FUNC./SET button.
• The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.
Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide. In this section, we will explain how to print images after specifying them. In the (Print) menu, select [Print] and press the FUNC./ SET button.
• To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print with the [Style] menu in Step 2. • When the print type is set to [Index], the [Date] cannot be printed. • When the print type is set to [Standard], the [File No.] cannot be printed. • The ID photo print function cannot be used. • The maximum number of images printed on one page in the Index print type depends on the selected paper size.
Printing Errors • An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the FUNC./SET button. * The [Resume] option may not appear with some types of errors. In that case, select [Stop].
List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) • Please refer to the printer’s user guide for solutions. 70 No Paper Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly. No Ink The ink cartridge has not been inserted or has run out of ink.
Printing with Bubble Jet Printers using Bubble Jet Direct Printing 1 Make sure that displays in the upper left corner of the LCD monitor. If displays, refer to Printing with Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge (p. 32). After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53) to print your images. However, please note that some menus and precautions differ, as listed below. See pages 54 and 68.
Cancel Printing • To cancel printing between images printed, press the FUNC./ SET button. A confirmation dialog appears. Select [OK] and press the FUNC./SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the FUNC./SET button.
• The ID photo print function cannot be used. • If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image. See page 68. • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print with the [Style] menu in Step 2.
Settings that Can Be Set with the Camera SELPHY ES Series/SELPHY CP Series Printers using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Date File No. Date/File No. Both Off Default Default Print Effect On Off Red-Eye1 Number of Prints 1 to 99 Trimming CreditCard 9 × 13 cm Paper Size 10 × 14.
Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Date File No. Date/File No.
4" × 6" 13 × 18 cm 5" × 7" A4 8.5" × 11" CreditCard Paper Size* 8" × 10" 10" × 12" A3 A3+/13" × 19" 14" × 17" 4" × 7.1" 12 cm DVD/CD Default Photo Paper Settings Fast Photo Paper Type Fine Art Semi-gloss Plain Default Default Bordered Borderless N-up Page Layout 2/4/9/16 Bordered (print with the shooting information) 20-up (print with the shooting information) 35-up (print images laid out like a 35mm contact sheet) * Paper sizes vary according to region.
SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When or connection) appears on the camera’s LCD monitor during a Print Options Selectable with the Camera Number of Prints 1 to 99 { { – Multiple {*1 – ID Photo { – Card #1, Card #2, Card #3, Letter (LTR) or A4 –*2 { Bordered { { Borderless { { { { { { Single { – Sequence { – Paper Borders Date Trimming Movies (Movie Print) { 1 image Image Style SELPHY Bubble Jet CP Series Prin
MEMO 78
MEMO 79
MEMO 80
