ENGLISH Camera User Guide z Please read the Read This First section (page 5). z Please also read the Software Starter Guide and the Direct Print User Guide.
Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software This Guide Connecting the Camera to a Computer Software Starter Guide Downloading Images to a Computer Direct Print User Guide Printer User Guide Using the Printer and Printing Use of genuine Canon accessories is recommended. This product is designed to perform optimally when used with genuine Canon accessories.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor and Viewfinder The LCD monitor and viewfinder are produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
About this Camera User Guide Symbols Used : This mark denotes issues that may affect the camera’s operation. : This mark denotes additional topics that complement the basic operating procedures. Question? Look Here First. What settings are available under each function? Will my settings remain in effect even after I’ve turned the camera off? Functions Available in Each Shooting Mode (p. 202) What functions are available through the menus? FUNC. Menu (p. 43) Rec. Menu (p. 46) Play Menu (p.
Thumb Index Introduces you to all of the camera components, and Preparing the explains how to load batteries and use the shutter button, Camera, Basic among other basic functions. Functions Describes shooting with the camera, from each shooting mode to using the camera’s various shooting features. Shooting Explains how to review recorded images or select playback settings, how to protect images or erase them, and how to edit movies.
Table of Contents : Functions and operations tables. These pages are shaded on the right edges to make them easy to find. Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Components Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Back/Bottom View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Controls. . . . . . . . . . . . . . . . . . .
Night Scene Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Shooting Panoramic Images (Stitch Assist) . . . . . . . . . .68 Movie Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Macro Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Super Macro Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Self-Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Digital Zoom . . . . . . . . . . . . . . . . . .
Editing Movies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 Rotating Images in the Display . . . . . . . . . . . . . . . . . . . . . . .130 Attaching Sound Memos to Images . . . . . . . . . . . . . . . . . . .131 Automated Playback (Slide Show) . . . . . . . . . . . . . . . . . . . .133 Protecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Erasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
Warnings z Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight. z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. z Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury.
z Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that water or other foreign substances enter the interior, immediately turn the camera’s power off and remove the camera battery or unplug the power cord from the power outlet.
z Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury due to an explosion. Immediately flush with water any area of the body, including the eyes and mouth, or clothing, that comes into contact with the inner contents of a battery. If the eyes or mouth contact these substances, immediately flush with water and seek medical assistance. z Avoid dropping or subjecting the batteries to severe impacts that could damage the casings.
Cautions z Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the compact power adapter to charge the battery pack or power the camera.
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.
Components Guide Front View AF Sensor Display Panel (p. 16) Strap Mount (p. 24) Hot Shoe (p. 171) Microphone (p. 131) Strap Mount (p. 24) Speaker Self-timer Lamp (p. 77) Lens Ring Release Button (p. 174, 179) Built-in Flash (p. 62) Red-eye Reduction Lamp (p. 62) 11 Preparing the Camera, Basic Functions Remote Sensor (p.
Back/Bottom View Diopter Adjustment Dial (p. 33) Viewfinder (p. 33) CF Card/Battery Cover (p. 21) Indicator Terminal Cover LCD Monitor (p. 32) Tripod Socket DIGITAL Terminal* (p. 150) DC IN Terminal (p. 182, 183) A/V OUT (Audio/Video Out) Terminal (p. 153) * To connect the camera to a computer or printer, use one of the following cables.
Controls Top (Zoom in) Button (p. 62, 123) (Backlight) Button (p. 16) Shutter Button (p. 41) Main Dial (p. 15) (Continuous)/ (SelfTimer/Wireless Controller) Button (p. 77, 79, 169) Power/Mode Indicator (p. 29) Mode Lever (p. 29) Button (p. 30) (Light Metering) Button (p. 91) (Macro)/ (Index) Button (p. 73, 124) Back Mode Dial (p. 14) (Monitor Selector) Button (p. 32) FUNC. (Function)/JUMP Button (p. 43, 125) MF (Manual Focus)/ (Microphone) Button (p.
Mode Dial Use the mode dial to switch between the shooting modes. z Image Zone : Auto (p. 53) The camera automatically selects settings. z Image Zone Auto Creative Zone The camera automatically selects settings according to the image composition type. : : : : : Portrait (p. 66) Landscape (p. 66) Night Scene (p. 67) Stitch Assist (p. 68) Movie (p. 71) z Creative Zone The user selects exposure, aperture or other settings to achieve special effects. : : : : : : 14 Program AE (p.
Main Dial Turning the Main Dial Turn z In Shooting Mode z Selects aperture value and shutter speed (p. 82, 85, 87) z Selects menu settings by pressing the FUNC. button (p. 43) z Selects exposure compensation and white balance (p. 92, 93) z In Playback Mode z Displays the previous and next image (p. 122) Clicking the Main Dial Click z In Shooting Mode z Fixes menu items set by pressing the FUNC. button (p. 43) z Switches between shutter speeds and aperture values in M mode (p.
Display Panel The display panel shows the camera settings, the remaining image capacity, movie shooting time, battery charge and other information. In Shooting mode (p. 29), you can turn on the backlight of the display panel for six seconds by pressing the button. To turn off the backlight within six seconds, press the button again.
96 Self-Timer/Wireless Controller 77, 168 Remaining Image Capacity/Message Code/Error Code/ (Intervalometer)/ Interval Shooting Remaining Shots 110, 159 White Balance Settings 93 Bracket 100, 102 Flash Exposure Compensation/Flash Output Adjustment 107 Exposure Compensation Level/AEB Level/Flash Exposure Compensation Level 92, 100, 107 * Goes off in Super Macro mode. The Super Macro mode icon appears on the LCD monitor (or in the viewfinder). (p.
Preparing the Camera Charging the Battery Pack Use the following procedures to charge the battery pack the first time and subsequently when the “Change the battery pack” message displays on the LCD monitor (or in the viewfinder) or the low battery icon ( ) and Lb ( ) message are lit on the Display Panel. 1 2 Charge Indicator 1 2 Align the edge of the battery pack with the line on the battery charger, then slide the battery in the direction of the arrow.
Battery Pack Handling Precautions z Keep the battery pack and camera terminals ( ) clean at all times. Dirty terminals may cause a poor contact between the battery pack and camera. Polish the terminals with a tissue or a dry cloth before charging or using the battery pack. z Do not cover the battery charger with anything, such as a tablecloth, cushion or blanket, when it is charging. Heat will build up internally and possibly lead to fire.
Charging the Battery Pack (continued) When using Battery Pack BP-511A or BP-514, you can distinguish between the discharged battery pack and fully charged battery pack by changing the direction of the battery cover (Fig. C and D). Recharge the battery fully before using it again. Fig. A Fig. B Fig. C Fig. D Fully Charged Battery Used Battery Attach so the blue portion Attach in the of the battery pack can be opposite way of seen through the window. Fig. C.
Installing the Battery Pack/CF card z Charge the battery pack before using it for the first time (p. 18). Label 2 1 4 Indicator 1 2 Battery lock 3 CF card eject button Check that the power is off (p. 29) and slide the CF card/battery cover in the direction of the arrow. Insert the battery pack. z The terminal side of the battery pack should face downward. z Insert the battery pack all the way in until the battery lock clicks. To remove the battery pack, push the battery lock.
Installing the Battery Pack/CF card (continued) 3 Insert the CF card. 4 Slide the CF card/battery cover closed. z The label side of the CF card should face the battery compartment. z Push the card in until the CF card eject button fully extends. To remove the CF card, push the CF card eject button and pull the card out. z When the indicator blinks, the camera is writing, reading, erasing or transmitting an image to or from the card.
CF Card Handling Precautions Microdrives are a recording medium with a hard disk. Their merits are a large capacity and a low price per megabyte of capacity. However, they can be more susceptible to vibrations and shocks than CF cards, which use durable flash memories. Please be careful, therefore, not to subject the camera to vibrations or shocks when using a microdrive, especially while recording or during playback.
Attaching the Neck Strap Attach the strap as illustrated on the left. Pull the strap tight in the buckle so that it does not slip. Perform the same steps on the other side of the camera (p. 11). z Avoid waving the camera about or catching it on other items when suspending it from the strap. Attaching the Lens Cap Attach the lens cap as illustrated on the left. Always replace the lens cap after use. To remove the lens cap, press the tabs on the lens cap and pull.
Attaching the Lens Hood Lens Hood Attach the lens hood so that its z meets the lens’ z, then turn the lens hood clockwise until the lens’ z meets . z If you use the built-in flash when the lens hood is attached, a portion of the image appears to be blocked by the lens hood and appears dark. Attaching the Filter Adapter If you wish to attach a commercially available filter (58 mm diameter), attach the filter adapter in advance. Be sure to turn off the camera before you attach the filter adapter.
Setting the Date/Time The Set Date/Time menu will appear the first time the camera power is turned on or whenever the date lithium battery charge is low. Start from Step 5 to set the date and time. 1 2 Turn on the camera (p. 29). Press the MENU button. z The [ (Rec.)] or [ appears. (Play)] menu (Rec.) Menu in Auto mode 3 Press the X arrow on the omni selector to select the [ (Set up)] menu. z Pressing the JUMP button also switches between menus.
27 Preparing the Camera, Basic Functions z The Date/Time cannot be inserted in the actual image even if the Date/Time have been set. For printing images with the date on them, refer to the Direct Print User Guide or Software Starter Guide. z Replacing the Date Battery (p.
Setting the Language Use this feature to select the language used in the menus and messages. 1 2 Turn on the camera (p. 29). Press the MENU button. z The [ (Rec.)] or [ appears. (Play)] menu (Rec.) Menu in Auto mode 3 Press the X arrow on the omni selector to select the [ (Set up)] menu. z Pressing the JUMP button also switches between menus. 4 Press the S or T arrow on the omni selector to select [Language] and press the SET button.
Basic Functions Turning the Power On/Off Orange: Shooting mode Green : Playback mode/Printer connection mode* Yellow : Computer connection mode* Off : The power of the camera is off. Power/Mode Indicator * For printer connection mode information, see the Direct Print User Guide. For computer connection mode information, see the Software Starter Guide. Mode Lever Release button Use this lever to turn the power on. To operate the mode lever, press the release button as shown on the left.
Turning the Power On/Off (continued) Powering the Camera in Playback Mode 1 Turn the mode lever to (Playback) while pressing the release button. z The power/mode indicator lights green and appears on the display panel. z Open the LCD monitor if needed (p. 32). Release button Turning the Power Off 1 Press the button. z The power goes off. z Be careful not to touch the lens when shooting. Please also refrain from forcing the lens with fingers or other objects.
Turning on the camera without the start-up sound and image Press and hold the button, then turn on the power. You can also turn the camera on with the LCD monitor closed. This camera is equipped with a power saving function. When this function is turned on and it activates, restore power by turning the mode lever toward or . Shooting Mode: Powers down approximately 3 minutes after the last control is accessed on the camera.
Using the LCD Monitor/Viewfinder Switching between the LCD Monitor and Viewfinder You can switch between the LCD monitor and viewfinder both in Shooting mode and Playback mode. z When the LCD Monitor is Closed The viewfinder turns on. z When the LCD Monitor is Open The LCD monitor turns on. (The viewfinder goes off.) You can switch between the LCD monitor and viewfinder by pressing the button. The camera turns on the last selected monitor when powered on in Shooting mode.
The LCD monitor can also be positioned as below. 1 z In this position, icons and messages do not appear on the LCD monitor. z The image shown on the LCD monitor is automatically flipped and reversed (the Reverse Display function) so that it appears correctly from in front of the lens. (You can disable the Reverse Display function (p. 48).) 2 Fold the LCD monitor back against the camera body. z Fold it until it clicks into place against the camera body.
Checking the information on the LCD Monitor/Viewfinder Each time you press the INFO. button the LCD monitor (or the viewfinder) cycles to the next information mode. Both the LCD monitor and the viewfinder have a field of vision of 100% of the actual shooting image. Shooting Mode Each time you press the INFO. button the information view switches as follows. No Information Information View∗ * Depending on the LCD monitor’s position, the information view may not display.
Information Displayed on the LCD Monitor/ Viewfinder z Shooting Mode The information appears for approximately 6 seconds when you operate the camera (such as making a change in shooting settings) even if the LCD monitor/viewfinder is set to No Information. (Sometimes no information appears depending on the camera setting at that time.) z A slow shutter speed has likely been selected because of insufficient lighting if the camera shake icon appears after metering preparations are complete.
Checking the information on the LCD Monitor/Viewfinder (continued) The following displays in information view. MF (Manual Focus) Indicator Shots Remaining or Remaining Movie Time (sec.) AF Frame Spot Metering Frame Aperture Value Shutter Speed 7.0x 8.8x 11x 14x 18x 22x Exposure Compensation p. 92 White Balance (WB) p. 93 Drive Mode p. 77, 79 ISO Speed p. 99 Photo Effect p. 96 Bracket p. 100, 102 Flash Exposure Compensation/Flash Output p. 107, 108 Compression Settings p.
z (Red) Manual Focus p. 114, 115 Movie Recording Mode p. 71 • The icons in the shaded boxes ( ) above and appear even when the information view is turned off. • In addition to the above, the messages, AF frame, Spot Metering Frame, shutter speed, aperture value, MF indicator (when manual focus is selected) and zoom bar (during the zoom operation) are shown as in the upper screen example. z Playback Mode In standard display mode, the following information appears.
Checking the information on the LCD Monitor/Viewfinder (continued) In detailed display mode, the following information also appears. Histogram Aperture Value Shutter Speed Adobe RGB 50 100 200 400 Movie Length Color Space (Adobe RGB) p. 98 ISO Speed p. 99 Photo Effect p. 96 Shooting Mode p. 14 Resolution Settings (Movie) p. 57 Exposure level p. 92 Flash Exposure Compensation p. 107 White Balance p. 93 Light Metering Mode p. 90 Macro Mode/Super Macro p. 73, 75 Mode Manual Focus p.
About the Histogram Sample Histograms Dark Image Balanced Image Bright Image Overexposure Warning In the following conditions, overexposed portions of the image blink. z When an image just shot is being reviewed on the LCD monitor (Information view) or in the viewfinder. z In the detailed display mode of the Playback mode. Using the Zoom (Focal Length) The zoom can be adjusted from 28 to 200 mm (equivalent to 35mm film format).
Using the Zoom (Focal Length) (continued) Zooming Rapidly Wide Angle To zoom in or out rapidly, turn the mode lever to (Shooting) and hold it, then turn the zoom ring in either the zoom in or zoom out direction. The swift zooming continues while you hold the mode lever. To reverse the zooming direction, turn the zoom ring a little in the opposite direction while holding the mode lever.
Pressing the Shutter Button The shutter button features a two-stage action. Pressing halfway automatically sets the exposure and focus. z The following camera settings appear on the LCD monitor (or in the viewfinder). Pressing the shutter button halfway AF Frame Shutter Speed AF Frame Aperture Value The AF frame displays in green and the beep sounds twice. The AF frame displays in yellow and a beep sounds. Focusing difficulty In this case, use the focus lock, or manually focus, to shoot (p. 112).
Pressing the Shutter Button (continued) z If appears or the AF frame displays in yellow while you press halfway, you can still press fully to take the shot. z Images are first saved into the camera’s internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. z The beep and shutter sound can be set On/Off using the menu (p. 49).
Selecting Menus and Settings 1 Turn the mode lever to . 2 Press the FUNC. button. 3 Press the S or T arrow on the omni selector to select a function item. 4 Press the W or X arrow on the 2 omni selector to select setting contents. 5 Press the FUNC. button. FUNC. 3 4 Select a function item using ISO Speed [ . Select setting contents using ] (p. 99) Photo Effect [ Bracket [ ] (p. 96) . Compression [ (p. 57) ] ] (p. 100, 102) Resolution [L]/File Format (p.
Selecting Menus and Settings (continued) z Selecting Settings by Pressing the MENU Button 1 In (Shooting) Mode Rec. Menu (p. 46) (When Shooting mode is MENU In (Playback) Mode Play Menu (p.
1 Press the MENU button. 2 Press the W or X arrow on the omni selector to switch between menu tabs. then press the W or X arrow on the omni selector to select setting contents. 4 Press the MENU button. zIn Step 2, you can also use the FUNC./JUMP button, / button and / button. zSettings cannot be selected with the main dial. zPress the SET button for items followed by an ellipsis (...) and then select a setting. Press the button again to confirm the setting.
Selecting Menus and Settings (continued) z Displayed menu items will vary according to the shooting mode and setting contents (p. 202). z You can apply a desired image and sound to [ ] and [ ] in the My Camera menu. For details, see Registering the My Camera Settings (p. 156) or the Software Starter Guide. z The default of all the settings changed by the menu and button operations except for [Date/Time], [Language] and [Video System] can be restored all at once (p. 52).
Menu Item Wireless Delay Spot AE Point ND Filter Safety Shift MF-Point Zoom AF Mode Digital Zoom Sets the duration before the self-timer releases the shutter once the shutter button is pressed. 10 sec.*/2 sec. Sets the duration before the self-timer releases the shutter once the remote control shutter button is pressed. 0 sec./2 sec.*/10 sec.
Selecting Menus and Settings (continued) Menu Item Converter Review Color Space Reverse Disp. Super Macro Intervalometer Save Settings Setting Content Adjusts the camera most appropriately when separately sold Tele-converter TCDC58A or Close-up Lens 500D is attached to the camera. None*/TC-DC58A/500D Sets the duration images display on the LCD monitor (or in the viewfinder) after the shutter button is released. Off/2 sec.* to 10 sec.
Menu Item Transfer Order z Reference Page Sets the images that will be printed on a direct print compatible printer or at a photo 142 lab service, the number of copies and other parameters. Specifies images before downloading to a 147 computer. (Set up) Menu Menu Item Setting Content Volume Set [On] to mute the start-up sound, operation sound, selftimer sound and shutter sound all at once.
Selecting Menus and Settings (continued) Menu Item LCD Brightness Power Saving Auto Power Down Display Off Date/Time Format File No. Reset Auto Rotate Distance Units Language Video System * Default setting 50 Setting Content Sets the brightness level of the LCD monitor. (Normal)*/ (Bright) Sets whether or not the camera automatically powers down after a specified period of time elapses without camera operation.
z (My Camera) Menu Menu Item Theme Start-up Image Start-up Sound Operation Sound Selftimer Sound Shutter Sound Setting Content Selects a common theme for each My Camera settings item.*¹ Sets the start-up image when you turn on the camera. Sets the start-up sound when you turn on the camera.*¹ Sets the sound when the omni selector or any button other than the shutter button is operated.*¹ Sets the sound informing you that the photo will be taken in 2 seconds.
Resetting the Settings to Default You can reset the menu and button operation settings to default. 1 2 Turn on the camera. z You can turn on the camera in either Shooting or Playback mode. Press the MENU button for longer than 5 seconds. z The message “Reset settings to default?” appears on the LCD monitor. 3 Select [OK] using the W or X arrow on the omni selector, then press the SET button. z The screen on the right appears while resetting. The normal screen resumes when resetting is complete.
Shooting – Letting the Camera Select Settings See Functions Available in Each Shooting Mode (p. 202) at the end of this manual to find out which settings can be changed in which shooting modes. Auto Mode 1 2 3 4 5 Check that the camera is in Shooting mode (p. 29). Turn the mode dial to . Aim the camera at the subject. Use the zoom ring to achieve the desired composition (relative subject size on the LCD monitor (or in the viewfinder)). Press the shutter button halfway (p. 41).
Reviewing an Image Right after Shooting (continued) 6 Press the shutter button all the way (p. 41). z You will hear the sound of the shutter when the shutter activates. z The picture appears for two seconds on the LCD monitor (or in the viewfinder). z See page 202 for settings that can be changed in this mode. z With the Review function, you can change the length of time images appear on the LCD monitor (or in the viewfinder) after shooting, or set it so they do not appear at all. (p.
z Switching between the LCD Monitor and Viewfinder While the Image is Displayed You can switch between the LCD monitor and viewfinder by pressing the button. Using this feature, you can shoot an image using the viewfinder and automatically let the camera display the image on the LCD monitor (or vice versa). Shoot an image using the viewfinder. Pause the image by pressing the SET button. The shot image continues to appear in the viewfinder. Press the button.
Reviewing an Image Right after Shooting (continued) 1 2 Right after shooting, press the FUNC. button while the image is displayed on the LCD monitor. Select [OK] using the W or X arrow on the omni selector and press the SET button. z The image is recorded in the RAW format. z When you press the shutter button halfway, the camera returns to the shooting screen. z The above operations cannot be performed if the image was shot with the digital zoom or when is already selected as the recording format.
Changing the Resolution and Compression Mode Dial Resolution ( ) Large ( ) Medium 1 Purpose • Print A4 size* 210 x 297 mm (8.3 x 3264 x 2448 pixels High 11.7 in.) or larger prints • Print letter size* 216 x 279 mm 2272 x 1704 pixels (8.5 x 11 in.) or larger prints ( ) Medium 2 1600 x 1200 pixels • Print postcard size 148 x 100 mm (6 x 4 in.) prints • Print L size 119 x 89 mm (4.7 x 3.5 in.) prints ( ) Medium 3 1024 x 768 pixels • Print card size 86 x 54 mm (3.4 x 2.1 in.
Changing the Resolution and Compression (continued) z Movies can be shot with the following resolution. Resolution 640 x 480 pixels 320 x 240 pixels 160 x 120 pixels 1 2 Press the FUNC. button. Select * (Compression) or L* (Resolution) using the S or T arrow on the omni selector. * The current setting is displayed. 3 Select the compression or resolution you wish to set using the main dial or the W or X arrow on the omni selector.
z See Image File Sizes (Estimated) (p. 192). z See CF Cards and Estimated Capacities (Recordable Images) (p. 191). z The resolution and compression settings are affected by the shooting mode selection as follows (only the resolution in mode). Initial Shooting Mode Next Shooting Mode Resolution and Compression after Change Settings change to those of the next mode. Settings do not change. Settings change to those of the next mode. Settings do not change. Settings change to those of the next mode.
Changing the File Format Mode Dial The recording file format can be switched to the RAW format before shooting the image. With the standard JPEG file format, the camera processes images after capturing them to produce optimal results. The JPEG format compresses images so that more can be stored on a single CF card. However, the compression is irreversible, meaning that the original image data cannot be recovered after processing.
1 2 Press the FUNC. button. Select L* (LCD monitor/Viewfinder) or L* (Display Panel) using the S or T arrow on the omni selector. * The current setting is displayed. Select RAW (LCD monitor/Viewfinder) or (r) (Display Panel) using the main dial or the W or X arrow on the omni selector. z You can shoot the image right after selecting settings by pressing the shutter button. The previous screen will appear again, once the image is shot. 4 Press the FUNC. button or click the main dial.
Using the Built-In Flash Mode Dial Use the flash according to the guidelines below. (In Movie mode, the flash cannot be used.) * * Auto with red-eye reduction Auto * Flash on with redeye reduction Flash on Flash off The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires. The flash fires automatically as required by the lighting level. The red-eye reduction lamp and the flash always fire. The flash always fires.
2 Shoot the image. z The flash will fire if the built-in flash pops up automatically (Flash Pop-up function) and appears on the LCD monitor (or in the viewfinder) when the shutter button is pressed halfway. z Shooting procedures are the same as for the mode (p. 53). 63 Shooting – Letting the Camera Select Settings z The flash fires with automatic adjustments when [Flash Adjust] is set to [Auto] in the Rec. menu.
Using the Built-In Flash (continued) Setting the Red-eye Reduction Function Mode Dial The red-eye reduction lamp fires when the flash is used in dark areas. This reduces light reflecting back from the eyes and making them appear red. 1 In the [ z (Rec.)] menu, set [Red-eye] to [On]. appears on the LCD monitor (or in the viewfinder). z When shooting with the red-eye reduction function, the subjects must look right at the red-eye reduction lamp for this mode to be effective.
Using the Built-In Flash with the Flash Pop-up Function Off Mode Dial In the [ (Rec.)] menu, set [Flash Pop-up] to [Off]. When you wish to fire the flash, pop up the built-in flash by pressing the button. z appears on the display panel and LCD monitor (or in the viewfinder) and the flash fires when the shutter button is pressed fully. z When you do not want the flash to fire, press the built-in flash down until it clicks. appears on the display panel and the LCD monitor (or in the viewfinder).
Portrait Mode Use this mode when you want the subject to appear sharp and the background to blur. 1 Turn the mode dial to . Shooting procedures are the same as for the mode (p. 53). z See page 202 for settings that can be changed in this mode. z To best achieve the effect of the background gradually fading, compose the image so that the upper half of the subject’s body fills most of the viewfinder or LCD monitor.
Night Scene Mode Use this mode to capture human subjects against the backdrop of an evening sky or night scene. The people are illuminated with light from the flash while the backdrop is captured at a slow shutter speed so that both appear correctly exposed. Turn the mode dial to . Shooting procedures are the same as for the mode (p. 53). z Always use a tripod to prevent camera shake in this mode. z See page 202 for settings that can be changed in this mode.
Shooting Panoramic Images (Stitch Assist) Use this mode to shoot a series of overlapping frames for merging (stitching) into a large panoramic image using a computer. Horizontal Vertical 2x2 z Please use the bundled PhotoStitch program to merge the images on a computer. Framing a Subject PhotoStitch detects the overlapping portions of adjoining images and merges them. When composing shots, try to include a distinctive item (landmark, etc.) in the overlapping portions.
Shooting Images can be shot in the following 5 sequences in Stitch Assist mode. Horizontally, left to right Horizontally, right to left Vertically, bottom to top Vertically, top to bottom Clockwise starting at the top left 1 2 Turn the mode dial to . Select the shooting sequence using the W or X arrow on the omni selector and press the SET button. z The shooting sequence is set. z You can also press the shutter button directly to shoot without pressing the SET button.
Shooting Panoramic Images (Stitch Assist) (continued) 3 Shoot the first image. 4 Compose and shoot the second image so that it overlaps the first. z The exposure and white balance settings are set and locked with the first image. z Minor discrepancies in the overlap can be corrected with the software. z An image can be retaken. Press the W or X arrow on the omni selector to return to that frame. Sequence 5 Sequence Use the same procedures to shoot the remaining frames.
Movie Mode Use this mode to shoot movies. The resolution can be selected from the following settings (p. 57): z[ (640 x 480)] z[ (320 x 240)] z[ (160 x 120)] Turn the mode dial to . The LCD monitor (or viewfinder) displays the maximum recording time (in seconds). 2 Press the shutter button all the way. 3 Press the shutter button all the way to stop recording the movie. z Shooting and sound recording starts simultaneously.
Movie Mode (continued) z You are recommended to use a CF card that has been formatted in your camera to shoot movies (p. 139). The supplied CF card can be used without being formatted. z The recording time may not display properly during shooting or filming may stop unexpectedly with the following types of CF cards.
Macro Mode Mode Dial Use the macro mode to shoot close-ups of subjects when the distance from the tip of the lens to the subject is in the following range (varies according to the zoom position): Distance to the subject 10 – 50 cm (3.9 in. – 1.6 ft.) 30 – 50 cm (1.0 – 1.6 ft.) Macro shooting not available * The zoom position appears in 35mm film equivalent values. 1 Press the 2 Shoot the image. button. z appears on the display panel and the LCD monitor (or in the viewfinder).
Macro Mode (continued) z In macro mode, the correct image brightness sometimes cannot be obtained with flash photography. Please set the ND filter to [On] and use the separately sold Macro Ring Lite MR-14EX or the Macro Twin Lite MT-24EX for flash photography in the macro mode. Use the Av or M mode and set the aperture to a higher value as required by the shooting conditions.
Super Macro Mode Mode Dial 1 In the [ (Rec.)] menu, select [Super Macro]. z See Selecting Menus and Settings (p. 44). 2 Press the SET button. z appears on the LCD monitor (or in the viewfinder) and the camera enters Super Macro mode. z Super Macro is canceled when you do any of following operations: • Press the MENU button (If you press the button again, the menu will disappear.
Super Macro Mode (continued) 3 Shoot the image. z Shooting procedures are the same as for the mode (p. 53). z During Super Macro mode, only the optical zoom operates even when the digital zoom is set to On. z The zoom bar appearing during zoom operation indicates the following movable zoom range in Super Macro mode: 42 to 90 mm (35mm film equivalent). The MF indicator appearing in manual focus mode also shows the movable range of the zoom.
Self-Timer You can take pictures with the self-timer in any shooting mode. 1 Press the 2 Shoot the image. button. z When the self-timer is set to 10 seconds, the self-timer sounds and the self-timer lamp starts blinking when the shutter button is pressed all the way. The blinking gets faster two seconds before the shutter activates. z When the self-timer is set to 2 seconds, the self-timer lamp blinks fast from the beginning. The shutter activates in two seconds.
Digital Zoom Mode Dial With the combined optical and digital zoom functions, images can be zoomed as follows: 8.8x, 11x, 14x, 18x and 22x. 1 In the [ (Rec.)] menu, select [Digital Zoom]. z See Selecting Menus and Settings (p. 44). 2 3 Select [On] and press the MENU button. Turn the zoom ring toward telephoto. z The lens will zoom to the maximum optical telephoto setting and stop. To further zoom the image digitally, turn the zoom ring in the same direction.
Continuous Shooting Mode Dial Use this mode to shoot successive frames while the shutter button is fully pressed. 1 2 3 Press the Use this mode to view the subject as you shoot continuously. The shutter interval is longer in this mode than in mode. Use this mode to shoot continuously with a short shutter interval. You cannot check the subject while shooting continuously. button. z Press the button until or appears on the display panel and the LCD monitor (or in the viewfinder).
Continuous Shooting (continued) z The interval between frames lengthens somewhat when the internal memory becomes full. z The built-in flash can be used, but the interval between images will lengthen to accommodate the flash recharge time. z The flash will not fire with an externally mounted flash. Selecting a Continuous Shooting Mode 1 In the [ (Rec.)] menu, select [Cont. Shooting]. z See Selecting Menus and Settings (p. 44). 2 Select [ ] or [ MENU button.
Shooting – Selecting Particular Effects Camera settings such as shutter speed and aperture value can be freely changed for shooting. See Functions Available in Each Shooting Mode (p. 202) at the end of this manual to find out which settings can be changed in which shooting modes. Program AE Use the program AE mode to have the camera automatically set the shutter speed and aperture value to match the brightness of the scene. 1 2 Turn the mode dial to P. Shoot the image.
Program AE (continued) z See page 202 for settings that can be changed in this mode. z If a correct exposure cannot be obtained, the shutter speed and aperture value show in red on the LCD monitor (or in the viewfinder). Use the following methods to obtain the correct exposure and make them show in white. • Use the flash. • Change the ISO speed setting. • Change the light metering mode. Differences between the P and Modes z The following settings can be adjusted in P mode, but not in mode.
2 Turn the main dial and select a shutter speed. 3 Shoot the image. Shooting – Selecting Particular Effects z The correct exposure has been set if the shutter speed and aperture value show in white on the LCD monitor (or in the viewfinder). z If the aperture value is shown in red on the LCD monitor (or in the viewfinder), the image is underexposed (insufficient light) or overexposed (too much light). Adjust the shutter speed using the main dial until the aperture value display turns to white.
Setting the Shutter Speed (continued) z See page 202 for settings that can be changed in this mode. z Please note that camera shake becomes a factor at slow shutter speeds. If the camera shake warning appears on the LCD monitor (or in the viewfinder), secure the camera to a tripod before shooting. z The fastest shutter speed for flash synchronization is 1/250 second. The camera automatically resets the shutter speed to 1/250 second if a faster speed is selected.
Setting the Aperture 1 2 Turn the mode dial to Av. z The aperture value will show on the display panel and LCD monitor (or in the viewfinder). Turn the main dial and select an aperture value. z If you adjust the zoom after you set the aperture value, the aperture value is sometimes changed according to the zoom position. 3 Shoot the image. z The correct exposure has been set if the shutter speed and aperture value show in white on the LCD monitor (or in the viewfinder).
Setting the Aperture (continued) z Depending on the zoom position, certain aperture values may not be available. z See page 202 for settings that can be changed in this mode. z Please note that camera shake becomes a factor at slow shutter speeds. If the camera shake warning appears on the LCD monitor (or in the viewfinder), secure the camera to a tripod before shooting. z In this mode, the shutter speed with synchronized flash is 1/60 second to 1/250 second.
Manually Setting the Shutter Speed and Aperture You can manually set the shutter speed and aperture to achieve a particular effect. This is convenient for shooting fireworks and other images where it is difficult to set the correct exposure automatically. 2 Turn the mode dial to M. z The shutter speed and aperture value will show on the display panel and LCD monitor (or in the viewfinder). Click the main dial and select a setting content (shutter speed or aperture value).
Manually Setting the Shutter Speed and Aperture (continued) z See page 202 for settings that can be changed in this mode. z For the correlation between aperture value and shutter speed, see page 84. z If you wish to change the exposure, adjust the shutter speed or the aperture using the main dial. z The brightness of the LCD monitor (or viewfinder) matches the selected shutter speed and aperture value.
Selecting an AF Frame Mode Dial 1 2 3 Press the button. z The AF frame appears in green on the LCD monitor (or in the viewfinder). Move the AF frame to the desired area using the S, T, W or X arrow on the omni selector. Press the button. z You can immediately shoot the image using the selected AF frame by pressing the shutter button instead of pressing the button. z The AF frame will move back to its original position (Center) if you hold down the button.
Switching between Light Metering Modes Mode Dial Evaluative Metering is the default light metering mode. This can be switched to another metering mode. Evaluative Metering Center-Weighted Averaging Spot AE Point Center AF Point 90 Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering.
1 Press the button to select the metering mode. z Each press of the button changes the metering mode as follows. (Evaluative Metering) (Center-Weighted Averaging) Shooting – Selecting Particular Effects (Spot AE Point) z The icon of the currently selected light metering mode appears on the display panel and LCD monitor (or in the viewfinder). (Spot AE Point), If you have selected go to step 2. If you have selected (Evaluative Metering) or (Center- Weighted Averaging), shoot the image.
Adjusting the Exposure Mode Dial Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background. 1 2 Press (S on the omni selector). z The exposure compensation bar appears on the display panel and LCD monitor (or in the viewfinder). Select a setting using the main dial or the W or X arrow on the omni selector. z The settings can be adjusted in 1/3 stops in the range of –2EV to +2EV.
Adjusting the Tone (White Balance) Mode Dial When the white balance mode is set to match the light source, the camera reproduces colors more accurately.
Adjusting the Tone (White Balance) (continued) 2 Select the desired setting using the main dial or the W or X arrow on the omni selector. z Please see below regarding the custom setting. z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 3 Press or click the main dial. z The white balance cannot be adjusted when the photo effect is set to (Sepia) or (B/W).
2 Aim the camera at the white paper or cloth, or gray card and press the SET button. z Aim the camera so that the white paper or cloth, or gray card, completely fills the frame on the LCD monitor (or viewfinder) before pressing the SET button. When you press the SET button, the camera reads the white balance data. z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.
Changing the Photo Effect Mode Dial You can shoot with different photo effects. ( ( ) Photo Effect Off ) Vivid ( ) Neutral ( ( ( ) ) ) Low Sharpening Sepia B/W ( ) Custom Effect Records with no effect. Emphasizes the contrast and color saturation to record in bold color. Tones down the contrast and color saturation to record neutral hues. Records subjects with softened outlines. Records in sepia tones. Records in black and white. You can freely set the contrast, sharpness and color saturation.
In this screen, select the item you wish to set using the S or T arrow on the omni selector and set it using the W or X arrow on the omni selector. Contrast z Select from – (Weak), 0 (Neutral) and + (Strong). z This function allows you to adjust the degree of brightness. z Select from – (Weak), 0 (Neutral) and + (Strong). z This function allows you to adjust how sharply outlines are defined. Saturation z Select from – (Low), 0 (Neutral) and + (High). z This function allows you to adjust the color depth.
Shooting in Adobe RGB Color Space Mode Dial This camera can record still images in Adobe RGB color space. Standard Normally select this option. Adobe RGB* Select this option when: - Doing commercial printing in the Adobe RGB environment - Using software, monitors and printers compliant with Exif 2.21 * Use of this function is not recommended if you do not have image processing and Adobe RGB technical knowledge. 1 In the [ (Rec.)] menu, select [Color Space]. z See Selecting Menus and Settings (p. 44).
Changing the ISO Speed Mode Dial Raise the ISO speed to prevent camera shake when shooting in dark places, when you want to shoot without the flash or with a faster shutter speed. Shooting – Selecting Particular Effects 1 Press the FUNC. button and select * (LCD monitor/Viewfinder) or * (Display Panel) using the S or T arrow on the omni selector. * The current setting is displayed. z The ISO speed setting menu appears on the LCD monitor (or in the viewfinder).
Auto Exposure Bracketing (AEB Mode) Mode Dial In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. You can adjust AEB settings in 1/3EV steps within the range of –2EV to +2EV of the standard exposure setting. AEB settings can be combined with exposure compensation settings (p. 92) to extend the adjustment range. The images are shot in the following order: Standard exposure, underexposure and overexposure.
3 Expand or contract the range using the main dial or the W or X arrow on the omni selector. 4 5 Press the FUNC. button or click the main dial. z Select or in Step 2 to cancel AEB mode. Shoot the image. z The AEB mode cannot be used for flash photography. If the flash fires, only one image gets recorded. 101 Shooting – Selecting Particular Effects z Use X to expand the range and W to contract it. z The camera returns to the Step 2 screen if you press the SET button.
Focus Bracketing (Focus-BKT Mode) Mode Dial You can shoot three images while the focus changes automatically when shooting with the manual focus (p. 114). Three ranges -small, medium or large- can be selected. Images are shot with the focus position changing in the following order: selected position, further away and closer. 1 Press the FUNC. button and select * (LCD monitor/Viewfinder) or * (Display Panel) using the S or T arrow on the omni selector. * The current setting is displayed.
3 Expand or contract the range using the main dial or the W or X arrow on the omni selector. 4 5 Press the FUNC. button or click the main dial. Shoot the image in manual focus (p. 114). z The Focus-BKT mode is not available when shooting with the flash on. The camera will revert to shooting only one image when the flash is on. 103 Shooting – Selecting Particular Effects z Use X to expand the range and W to contract it. z The camera returns to the Step 2 screen if you press the SET button.
Locking the Exposure Setting (AE Lock) Mode Dial You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. 1 Focus the AF frame or the spot metering frame on the subject on which you wish to lock the exposure setting and press the shutter button halfway. z Selecting an AF Frame (p. 89) z Switching between Light Metering Modes (p. 90) 2 While pressing the shutter button halfway, press the button.
105 Shooting – Selecting Particular Effects z The automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure with the following procedure. 1. Turn the mode dial to P, Tv or Av. 2. Focus on the subject on which you wish to lock the exposure. • Press the shutter button halfway. In Tv and Av modes, the Safety Shift function works if [Safety Shift] is set to [On] (p. 86). 3. Press the button.
Locking the Flash Exposure Setting (FE Lock) Mode Dial You can obtain the correct exposure with flash photography regardless of the location of your subject in the composition. 1 Press the (p. 62). (Flash) button and set the flash to fire z If you are using an externally mounted flash, please refer to its manual for setting instructions. 2 3 Focus the AF frame or the spot metering frame on the subject on which you wish to lock the flash exposure setting and press the shutter button halfway.
Switching between Flash Adjustment Settings Mode Dial * Speedlite 220EX/380EX/420EX/550EX, Macro Ring Lite MR-14EX, Macro Twin Lite MT-24EX 1 2 Select [Flash Adjust] from the [ (Rec.)] menu. z See Selecting Menus and Settings (p. 44). Select [Auto] or [Manual] and press the MENU button. Compensating the Flash Adjustment ( (Flash)) Mode Dial The flash adjustment can be changed when [Flash Adjust] is set to [Auto]. The settings can be adjusted in 1/3-stop increments in the range of –2EV to +2EV.
Switching between Flash Adjustment Settings (continued) 3 Press the FUNC. button or click the main dial. z To cancel the compensation, return the setting to . Compensating the Flash Output In M mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps, starting from FULL, when shooting. This setting is also active with slave flash photography where multiple flashes are fired at the subject from different positions because the pre-flash does not fire.
Switching the Timing at which the Flash Fires Mode Dial 1st-curtain Image shot with the 1st-curtain setting 1 Image shot with the 2nd-curtain setting From the [ (Rec.)] menu, select [1st-curtain] or [2nd-curtain] in [Flash Sync]. 109 Shooting – Selecting Particular Effects 2nd-curtain The flash fires right after the shutter opens, regardless of the shutter speed. Usually, the 1st-curtain is used when shooting. The flash fires right before the shutter closes, regardless of the shutter speed.
Shooting Images at Set Intervals (Intervalometer) Mode Dial You can shoot images at a set interval. This function can be used for fixed-point observation of plants and blooming flowers. The shooting interval time can be set from 1 to 60 minutes and 2 to 100 images can be shot. z Since the camera may shoot continuously for an extended period of time, the use of the separately sold Compact Power Adapter CA-560 is recommended (p. 182). 1 Select [Intervalometer] from the [ (Rec.)] menu.
3 Press the T arrow on the omni selector, then select the number of shots using the W or X arrow on the omni selector. * The maximum number of shots may decrease according to the images shot. 4 Press the SET button 5 Press the shutter button. z appears on the LCD monitor (or in the viewfinder) and appears on the display panel. z The first image is shot and the interval shooting session starts.
Shooting Problem Subjects for the Autofocus The autofocus may not work well on the following types of subjects.
Shooting with AF Lock Mode Dial 1 Press the shutter button halfway to lock the focus. Keep it pressed and press the MF button. 2 Recompose the image and press the shutter button all the way to shoot the image. z The AF lock function is convenient because you can let go of the shutter button to recompose the image. Moreover, the focus remains locked after the picture is taken, allowing you to capture a second image with the same focus.
Shooting Problem Subjects for the Autofocus (continued) Shooting in Manual Focus Mode Mode Dial The focus can be manually set. 1 Press and hold the MF button, then turn the zoom ring to focus on the subject. z The ` icon and the MF indicator will appear on the LCD monitor (or in the viewfinder). z The AF frame area is magnified when [MF-Point Zoom] is set to [On] in the [ (Rec.)] menu.* MF indicator * Except in the and modes, when the digital zoom is activated or a TV is used as the display.
Using the Manual Focus in Combination with the Auto Focus Mode Dial The camera automatically searches for a more suitable focusing point from the current manually focused location. Focus the camera with the manual focus, then press the SET button. z The camera focuses automatically to a more accurate focusing point near the current focusing point. z You cannot change the AF frame setting while focusing manually. Cancel the manual focus mode, then change the AF frame setting.
Switching between Focus Settings Mode Dial You can switch between focus settings to shoot. Continuous Single 1 The camera is continually focusing on whatever it is aimed even when the shutter button is not pressed, allowing you to shoot without missing opportunities. This is the default setting. The camera only focuses when the shutter button is pressed halfway, conserving battery power. In the [ (Rec.)] menu, select [AF Mode]. z See Selecting Menus and Settings (p. 44).
Settings that can be saved to the • Shooting Mode (P, Tv, Av and M) • Rec. menu settings • Manual Focus location mode Turn the mode dial to P, Tv, Av or M. Shooting – Selecting Particular Effects 1 2 3 / • Functions available in P, Tv, Av and M except for Super Macro mode (p. 202) • Zoom location Set the setting contents you wish to save. Select [Save settings] from the [ (Rec.)] menu. z See Selecting Menus and Settings (p. 44). 4 5 Select [C1] or [C2] and press the SET button.
Using the ND Filter Mode Dial The brightness can be decreased by setting the ND filter on. This allows you to select a smaller aperture value and a slower shutter speed than usual. 1 2 Select [ND Filter] in the [ (Rec.)] menu. z See Selecting Menus and Settings (p. 44). Select [On] and press the MENU button. z ND appears on the display panel and the LCD monitor (or in the viewfinder). z Always use a tripod to prevent camera shake in this mode.
Setting the Auto Rotate Function Mode Dial 1 Select [Auto Rotate] in the [ (Set up)] menu. z See Selecting Menus and Settings (p. 44). 2 Select [On] and press the MENU button. z When this function is On, an icon showing the orientation of the camera appears at the upper right corner of the LCD monitor (or viewfinder). Normal Camera on right end Camera on left end z This function may not operate correctly when the camera is pointed straight up or down. Check that the correct camera orientation icon (e.
Resetting the File Numbers You can select the way file numbers are assigned. On Off 1 The file numbers are reset to the start (100-0001) each time a new CF card is inserted. New images recorded on CF cards with existing files are assigned the next available number. The file number of the last image to be shot is memorized so that images recorded to a new CF card start from the next number. In the [ (Set up)] menu, select [File No. Reset]. z See Selecting Menus and Settings (p. 44).
Folder File Capacity Each folder usually contains up to 100 images. However, since images shot in Continuous mode or Stitch Assist mode are always saved into the same folder, a folder may contain more than 100 images. The number of images may also exceed 100 if a folder contains images copied from a computer or images shot with other cameras. Please note, however, that the images in folders containing 2001 or more images cannot be replayed in this camera.
Playback Displaying Images Individually You can view the recorded images on the LCD monitor (or in the viewfinder). 1 Open the LCD monitor. 2 Turn the mode lever to 3 z The LCD monitor can be freely opened to any position (p. 32). z You can use the viewfinder for playback without opening the LCD monitor. . z The last recorded image appears (single image playback). z You can switch between the LCD monitor and viewfinder by pressing the button. z appears on the display panel.
Magnifying Images Images can be magnified up to approximately 10 times while in single image playback. 1 While in single image playback, press the button or turn the zoom ring toward telephoto. Approximate position Playback, Erasing z Press the W, X, S or T arrow on the omni selector to move the magnified area around the image. z To reduce the size of the magnified image, press the button or turn the zoom ring toward wide angle.
Viewing Nine Images at a Time (Index Playback) Up to nine images can be viewed at once in index playback. 1 While in single image playback, press the button. z Nine images appear at once (index playback). Movie Frame 2 Selected Image Change the image selection by turning the main dial or using the S, T, W or X arrow on the omni selector. Pressing the S arrow in this row displays the previous set of nine images. Pressing the T arrow in this row displays the next set of nine images.
JUMP Jumping Between Images The display can be advanced or set back 9 images in either single image playback or index playback. 1 Press the JUMP button while in single image playback (p. 122) or index playback (p. 124). z The jump bar appears. 2 The displayed image(s) change. Single Image Playback Playback, Erasing z Jump 9 images behind or ahead by turning the main dial or using the W or X arrow on the omni selector.
Viewing Movies You can play back movies shot in 1 2 Turn the mode lever to mode. . z Movies cannot be viewed in index playback. Select a movie by turning the main dial or using the W or X arrow on the omni selector. z A movie displays with the instruction on it. 3 4 Press the SET button. z The movie playback panel appears. Select (Play) using the W or X arrow on the omni selector and press the SET button. z The movie images and sound will play.
Fast Forwarding/Rewinding z Select one of the following operations using the W or X arrow on the omni selector and press the SET button. (Exit) : Return to single image playback (First Frame) : First Frame (Previous Frame) : Previous Frame (Rewinds if the SET button is held down) (Next Frame) : Next Frame (Fast-forwards if the SET button is held down) (Last Frame) : Last Frame z The volume at which movies play back can also be adjusted in the Set up menu (p. 49).
Editing Movies You can delete unwanted portions from the first or second half of a movie clip. 1 Select the movie you wish to edit and press the SET button. z See Viewing Movies (p. 126). 2 Select (Edit) using the W or X arrow on the omni selector and press the SET button. z The movie editing panel and the movie editing bar appear. 3 Select an editing method using the S or T arrow on the omni selector.
6 Select (Save) using the S or T arrow on the omni selector and press the SET button. z When is selected, the edited movie is not saved and the camera reverts to the movie editing panel. 7 Select [Overwrite] or [New File] using the W or X arrow on the omni selector and press the SET button. Playback, Erasing z [Overwrite]: Saves the edited movie under the same file name as the original movie. The original data is deleted. z [New File]: Saves the edited movie under a new file name.
Rotating Images in the Display Images can be rotated 90° and 270° clockwise on the LCD monitor (or in the viewfinder). Original 1 90° 270° Select [Rotate] from the [ (Play)] menu. z See Selecting Menus and Settings (p. 44). 2 Select an image you want to rotate by turning the main dial or by using the W or X arrow on the omni selector and press the SET button. z The image cycles to the next orientation (90° J 270° J original) each time the SET button is pressed. 3 Press the MENU button.
z Images can be magnified when rotated (p. 123). z Images taken vertically with the auto rotate function (p. 119) set to [On] will automatically be rotated to the vertical position when viewed on the LCD monitor (or in the viewfinder). Attaching Sound Memos to Images In playback mode (including single image playback, index playback, magnified playback and the review immediately after shooting in Shooting mode) you can attach sound memos (up to 60 seconds) to an image.
Attaching Sound Memos to Images (continued) Erasing the Sound Memos Select in Step 2 on the previous page. z You cannot attach sound memos to movies. z You cannot record or playback sound notes for images that already have an incompatible sound file attached. If you attempt to record or play such images, the “Incompatible WAVE format” message will display. Incompatible sound files can be deleted with this camera. z Sound memos for protected images cannot be erased (p. 137).
Automated Playback (Slide Show) Slide show image settings are based on DPOF standards (p. 147). Starting a Slide Show All images or a selection of images on a CF card can be displayed one-by-one in an automated slide show. All Images Slide Show 1 – 3 In the [ (Play)] menu, select [Slide Show] and press the SET button. Playback, Erasing 1 Plays all the images on the CF card in order Plays the images selected for each show in order. z See Selecting Menus and Settings (p. 44).
Automated Playback (Slide Show) (continued) 4 When the slide show is over, press the MENU button. z The slide show menu appears again. Press the MENU button again to close the menu. z Movie images play for the length of time that they were recorded regardless of the time set in the slide show settings. z The power saving function is disabled while a slide show plays on the camera (p. 31). Selecting Images for Slide Shows You can mark images for inclusion in slide shows 1-3.
Index Playback 5 Playback, Erasing z Press the button to switch to index playback (3 images). z Select an image using the main dial or the W or X arrow on the omni selector and mark or remove marks from images using the S or T arrow on the omni selector. z The selection number and a check mark appears at the bottom of selected images. z After you press the SET button, you can select all the images by selecting [Mark all] using S or T on the omni selector and pressing the SET button again.
Automated Playback (Slide Show) (continued) Adjusting the Play Time and Repeat Settings You can change the play time for all the images in a show and have the show repeat itself continuously. Sets the duration that each image in a slide show is displayed. Play Time The options are any one of 3 – 10 seconds, 15 seconds, 30 seconds and Manual. Sets whether the slide show stops when all the slides have Repeat been displayed or continues to display until stopped. 1 2 3 4 5 Display the slide show menu.
Protecting Images You can protect important images from accidental erasure. 1 In the [ (Play)] menu, select [Protect] and press the SET button. z See Selecting Menus and Settings (p. 44). 2 Select an image you want to protect and press the SET button. 3 Playback, Erasing z The icon appears on protected images. z To remove the protection, press the SET button again (in protection mode).
Erasing Erasing Images Individually z Please note that erased images cannot be recovered. Exercise caution before erasing a file. 1 2 Select the image you wish to erase and press the button. Select [Erase] using the W or X arrow on the omni selector and press the SET button. z To cancel instead of erasing, select [Cancel] and press the SET button. z Protected images cannot be erased with the erase function (p. 137). Erasing All Images 1.
Formatting a CF Card You should always format a new CF card or one from which you wish to erase all images and other data. Formatting may restore a CF card if it returns an error or if the “ ” message displays. z Please note that formatting (initializing) a CF card erases all data, including protected images and other file types. Please check the contents of the CF card before formatting it. 1 In the [ (Set up)] menu, select [Format] and press the SET button.
Print Order About Printing You can easily print images stored on the CF card by connecting the camera to a direct print compatible printer with a cable and operating the camera buttons. In addition, you can specify the images on your CF card you want to print and how many copies you want (DPOF* Print Settings), and then take the CF card to a participating photo lab to have them printed out later.
Refer to the System Map supplied with your camera for direct print compatible printer (CP series or Bubble Jet printers) information. Direct Print Compatible Printing z Connect the camera to the printer z Set various print settings (except DPOF print settings) z Print For details, see the Direct Print User Guide. DPOF Print Settings z See Selecting Images for Printing (p. 142). Print Order, Transferring z Set the number of print copies (p. 142). z See Setting the Print Style (p. 144).
Print Settings (DPOF Print Settings) You can select images on a CF card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. Refer to the Direct Print User Guide for instructions on how to select print settings from the printer. z The mark may appear on images that have had print marks set by another DPOF compliant camera.
z When the print type (p. 144) is set to [Index], select an image using the main dial or the W or X arrow on the omni selector and mark or remove marks from images using the S or T arrow on the omni selector. A check mark appears on the marked image. z You can use the same procedures to select images in index playback (3 images). Press the button to switch between single image playback and index playback.
Print Settings (DPOF Print Settings) (continued) Setting the Print Style Always select a print style after having selected the image you wish to print. The following print settings can be selected. Standard Print Type Index Both Date File No.
4 Press the W or X arrow on the omni selector to select a setting. Print Type z Select [Standard], [Index] or [Both]. Date z Select [On] or [Off]. File No. z Select [On] or [Off]. 5 Press the MENU button. z The set up menu will close and the Print Order menu will reappear. z When [Print Type] is set to [Index], the [Date] and [File No.] cannot be set to [On] at the same time. z With CP printers, if [Print Type] is set to [Both], both [Date] and [File No.
Print Settings (DPOF Print Settings) (continued) Resetting the Print Settings The print settings can all be removed at once. The print type is reset to [Standard] and the date and file number options are set to [Off]. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. z See Selecting Menus and Settings (p. 44). 2 Press the W or X arrow on the omni selector to select [Reset] and press the SET button.
Image Transmission Settings (DPOF Transfer Order) You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. You cannot use this function to transfer several images at once on Mac OS X computers. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards.
Selecting Images for Transferring (continued) 3 Select images for transferring. Single Images z Select an image using the main dial or the W or X arrow on the omni selector and mark or remove marks from images using the S or T arrow on the omni selector. A check mark appears on the marked image. z You can use the same procedures to select images in index playback (3 images). Press the button to switch between single image playback and index playback.
Downloading Images to a Computer Download images taken with the camera to a computer in one of the following ways: z Connect the camera to a computer with the USB cable You can then download images directly from the camera to a computer. z Directly from the CF card Using a card adapter or a card reader, you can download images directly from the CF card.
Connecting the Camera to a Computer Via the USB Cable (continued) 2 Connect the supplied interface cable to the computer’s USB port and the camera’s DIGITAL terminal. z You do not need to turn off the computer or camera when making a USB connection. z Please refer to your computer manual for information regarding the location of the USB port. z The camera’s LCD monitor (or viewfinder) will blank out when the connection to the computer is complete and the power/mode indicator will light yellow.
Downloading Images without Installing the Software (Windows XP and Mac OS X (v.10.1 or v.10.2) only) If you are using Windows XP or Mac OS X (v.10.1 or v.10.2), you can use the software distributed with these operating systems to download images (JPEG format only) without installing the software bundled on the Canon Digital Camera Solution Disk. This is useful for downloading images to a computer in which the software is not installed.
Downloading Directly from a CF Card 1 Eject the CF card from the camera, and insert it into a CF card reader connected to the computer. z If you are using a PC card reader or PC card slot in your computer, first insert the CF card into a PC card adapter (sold separately), and then insert the PC card adapter into the computer’s PC card reader or PC card slot. 2 3 Double-click the icon of the drive with the CF card. Copy images from the card into a folder of your choice on the hard disk.
Viewing Images on a TV Set A video-compatible television connected via the supplied AV cable AVC-DC300 can be used to view images as you shoot or replay them. 1 2 3 z Also turn the television off. Attach AV Cable AVC-DC300 to the A/V OUT terminal on the camera. Yellow Plug To the Video In Jack Black Plug To the Audio In Jack Plug the other ends of the AV cable to the video in and audio in jacks on the TV. Turn on the TV and switch it to Video mode. Turn the mode lever to or (p. 29, 30).
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, shutter, operation and self-timer sounds. Each menu item has three choices. e.g. Start-up image [1] The [ The [ [ [ ] ] ] option features science fiction related images and sounds. ] option features animals. Changing My Camera Settings 1 2 Turn on the camera and press the MENU button. z The [ (Rec.)] or [ (Play)] menu appears.
4 Press the MENU button. z Pressing the MENU button closes the menu and makes the settings take effect. z In Shooting mode, the menu can be closed by pressing the shutter button halfway. (In Playback mode, the menu closes when the shutter button is pressed halfway and the camera switches to shooting mode.) z If you select [Theme] in Step 3, you can select a consistent theme for each of the My Camera Settings.
Registering the My Camera Settings Images recorded onto the CF card and newly recorded sounds can be added as My Camera settings to the [ ] and [ ] menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. The following menu items can be saved to the camera. z Start-up Image z Start-up Sound z Operation Sound z Selftimer Sound z Shutter Sound Registering CF Card Images and Sounds 1 Turn the mode lever to MENU button.
the image you wish to 5a Select register using the W or X arrow or on the omni selector. 6a Press the SET button. [ (Record)] using 5b Select the W or X arrow on the omni selector, then press the SET button. z Recording starts. z Recording stops when the set amount of time has passed. Start-up Sound: 1 second Operation Sound: 0.3 second Selftimer Sound: 2 seconds Shutter Sound: 0.3 second [ (Register)] using the W or X arrow on 6b Select the omni selector and press the SET button.
Registering the My Camera Settings (continued) File Format of My Camera Settings My Camera settings should conform to the below file formats. However, CF card images shot with this camera can be registered as My Camera settings regardless of the below formats.
List of Error/Message Codes The following error and message codes may appear on the display panel. Error Codes (XX: number) : The camera has experienced a problem. Turn off the power, wait a second, and then try shooting or playing back. If the error code appears repeatedly, there is a problem. Note the error code number and take the camera in for servicing. If an error code appears immediately after a shot, there is a chance that the image was not recorded. Check the image in playback mode.
List of Messages The following messages may appear on the LCD monitor (or in the viewfinder). z For messages which may appear when a printer is connected, refer to the Direct Print User Guide. Resetting: Resetting all the camera and menu settings to default Busy... : Image is being recorded to, or read from, CF card. Resetting settings to default. No memory card: You attempted to shoot or play back images without a CF card installed.
Cannot magnify!: You attempted to magnify an image that was photographed with another camera, recorded in a different format, or edited on a computer. Cannot rotate: You attempted to rotate an image that was photographed with another camera, recorded in a different format, or edited on a computer. Unidentified Image: You attempted to play back an image that was recorded in a special format (proprietary format used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera.
Troubleshooting Problem Camera will not operate Camera will not record 162 Cause Solution Power is not turned on zTurn on the camera. JTurning the Power On/ Off (p. 29) CF card/battery cover opened zConfirm that the CF card/ battery cover is securely closed. Insufficient battery voltage ([ ] lights in display panel) zFully charge the battery before installing it in the camera. zUse a compact power adapter.
Problem Cause Solution Camera will not record CF card not formatted correctly zFormat CF card. J See Formatting a CF Card (p. 139). zIf reformatting doesn’t work, the CF card logic circuits may be damaged. Contact the nearest Canon Customer Support Help Desk. Cannot play back You attempted to play back images shot with another camera or images edited at a computer. zComputer images can be added to the camera using the bundled software program ZoomBrowser EX or ImageBrowser.
Troubleshooting (continued) Problem Cause Solution Battery pack will not Poor contact between charge battery pack and battery charger zClean the battery terminals with a clean dry cloth. zAttach the battery pack to the battery charger securely. zInsert the plug of the battery charger firmly into the power outlet. Image is blurred or out of focus zBe careful not to move the camera when pressing the shutter button. zUse a tripod at slow shutter speeds when the camera shake warning appears.
Problem Subject in recorded image is too dark Cause Solution Insufficient light for shooting zSet the built-in flash to on. zUse a high-output externally mounted flash. Subject dark in comparison to the background zSet the exposure compensation to a positive (+) setting. zUse the AE lock or spot metering function. J See Locking the Exposure Setting (AE Lock) (p. 104) and Switching between Light Metering Modes (p. 90).
Troubleshooting (continued) Problem Subject in recorded image is too bright Cause Subject bright in comparison to the background zSet the exposure compensation to a negative (–) setting. zUse the AE lock or spot metering function. J See Locking the Exposure Setting (AE Lock) (p. 104) and Switching between Light Metering Modes (p. 90). zSet [ND Filter] to [On]. J See Using the ND Filter (p. 118). Light shining directly on subject or reflected off subject into camera zChange the shooting angle.
Problem Cause Solution White dots or white asterisks appear on the image Light from the flash has zThis is a phenomenon that reflected off dust particles occurs with digital or insects in the air. This cameras and does not occurs more frequently in constitute a malfunction. the following conditions: • When shooting at the wide angle end. • When shooting with a high aperture value in the aperture-priority AE mode.
Appendix Using the Wireless Controller Installing the Battery Install the date battery (CR2025) into the Wireless Controller WLDC100 before use. z Be particularly careful to keep the date batteries out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall.
Shooting/Playback The wireless controller can be used to shoot or play back. The wireless controller can be operated from an approximate distance of up to 5 m (16.4 ft.) from the front remote sensor (2) and approximately 1 m (3.3 ft.) from the side remote sensor (1). Remote Sensors Transmitter z 1 2 When Macro Ring Lite MR14EX or Macro Twin Lite MT-24EX is mounted on the camera, it will block the front remote sensor 2. In this case, aim the wireless controller toward the side remote sensor 1.
Using the Wireless Controller (continued) z Playback appears on the display panel. zDisplay the previous image zPlay back the movie images zDisplay images in sets of nine (index playback). zDisplay the next image zIn magnified mode, these buttons move the magnified area around the image. zIn index playback, these buttons move the image selection. zEach press of this button cycles the information view mode. zThe display cycles between magnifications of approximately 2.5, 5 and 10.
Using an Externally Mounted Flash (Sold Separately) You can make your flash photography even clearer and more natural appearing with the use of a separately sold externally mounted flash. The camera’s auto exposure function will operate with a Canon Speedlite 220EX, 380EX, 420EX, 550EX, a Macro Ring Lite MR14EX or a Macro Twin Lite MT-24EX (p. 174). (Except with the M mode or when [Flash Adjust] is set to [Manual].) Other flashes may fire manually or not fire at all. Please check the manual for your flash.
Using an Externally Mounted Flash (Sold Separately) (continued) 3 Turn the mode dial to a position other than . or Speedlite 220EX, 380EX, 420EX, 550EX, Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX z The flash will automatically adjust its output in the , , , , P, Tv and Av modes when [Flash Adjust] is set to [Auto]. The maximum flash synchro shutter speed is 1/250 second. z In M mode or when [Flash Adjust] is set to [Manual], the flash will fire with manual adjustments.
4 5 Press the shutter button halfway. z The flash is charged when its pilot lamp lights up. Press the shutter button all the way to shoot the image. z The externally mounted flash will not fire in , or continuous shooting. z The Bracket mode cannot be used for flash photography. If the flash fires, only one image gets recorded. z Flashes (especially high-voltage flashes) or flash accessories made by other manufacturers may override certain camera functions or cause a camera malfunction.
Using an Externally Mounted Flash (Sold Separately) (continued) How to Mount Macro Ring Lite MR-14EX and Macro Twin Lite MT-24EX The separately sold Conversion Lens Adapter LA-DC58C is required to mount Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX on the camera. z Conversion Lens Adapter LADC58C can be divided into the rear and front parts. Normally, it should be used joined together.
2 Attach the conversion lens adapter so that its z meets the lens’ and turn it in the direction of the arrow until z meets S. z If you plan to attach Close-up Lens 500D (p. 178), do it after you attach this adapter. 3 Attach the controller to the camera’s hot shoe. 4 Macro Ring Lite MR-14EX Press and hold the release buttons on both sides of Macro Ring Lite MR-14EX and fit it into the conversion lens adapter.
Using an Externally Mounted Flash (Sold Separately) (continued) 5 Press the button to set the camera to Macro mode and set [ND Filter] to [On]. z Macro mode (p. 73) z ND filter (p. 118) z When Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX is mounted on the camera using Conversion Lens Adapter LADC58C with its two parts joined, shooting in wide angle could cause dark shadows on the image.
Using the Tele-converter (Sold Separately)/ Close-up Lens (Sold Separately) The separately sold Conversion Lens Adapter LA-DC58C is required to use the separately sold Tele-converter TC-DC58A and Close-up Lens 500D (58 mm) with the camera. Conversion Lens Adapter LADC58C is a combination of rear and front parts, however, use them as a single, joined unit. (No other tele-converters and close-up lenses can be used.) Set [Converter] in the Rec.
Using the Tele-converter (Sold Separately)/Close-up Lens (Sold Separately) (continued) Tele-converter TC-DC58A This 58 mm-threaded diameter magnifying conversion lens is for taking telephoto shots. The lens changes the focal length of the camera body’s lens by a factor of 1.5x. z Use the tele-converter lens with the focal length set to the maximum telephoto setting. Using the zoom at other settings may cause dark shadows on the image. If you set [Converter] in the Rec.
Mounting the Lenses 1 Turn off the camera. Then press and hold the ring release button and remove the outer ring of the lens. Ring Ring Release Button 2 3 Attach the conversion lens adapter so that its z meets the lens’ and turn it in the direction of the arrow until z meets S. Mount the lens by turning it in the direction of the arrow.
Using the Tele-converter (Sold Separately)/Close-up Lens (Sold Separately) (continued) Setting the Camera Lens to the Most Appropriate Position 1 Turn the mode lever to MENU button. z The [ 2 (Shooting) and press the (Rec.)] menu appears. Select [Converter] using the S or T arrow on the omni selector, then select the name of the mounted lens using the W or X arrow on the omni selector. z If you select [TC-DC58A], the zoom moves to the telephoto end.
z The distance shown with the MF indicator (p. 114, 115) does not change even if you change the [Converter] setting from [None]. z The camera does not enter Macro mode when [Converter] is set to any setting other than [None]. If the camera is currently in Macro mode, Macro mode will be canceled when [Converter] is set to another setting than [None]. z Please note that the images will not merge properly with the PhotoStitch program on a computer when they are shot in mode with a conversion or close-up lens.
Using a Compact Power Adapter (Sold Separately) You should use the separately sold Compact Power Adapter CA560 when using the camera for long periods of continuous use or for connecting to a computer or printer. Compact Power Adapter CA-560 2 To power outlet 1 DC IN terminal 1 2 Attach the power cord to the compact power adapter and plug it into a power outlet. Open the terminal cover and connect the DC plug of the compact power adapter to the camera’s DC IN terminal.
Using a Battery Charger (Sold Separately) and Car Battery Cable (Sold Separately) Battery Charger CG-570 Car Battery Cable CB-570 Combined use of Battery Charger CG-570 (sold separately) and Car Battery Cable CB-570 (sold separately) lets you charge battery packs (up to 2 at the same time) from a car’s cigarette lighter socket.
Replacing the Date Battery If the Set Date/Time menu appears when you turn on the camera power, the date battery charge is low and the date and time settings have been lost. Please replace the battery with a generic CR2016 lithium coin battery with the following procedures. Please note that the first date battery may appear to expire relatively quickly after you purchase the camera. This is because it is installed in the camera at the point of manufacture, not when you make the purchase.
5 Replace the date battery holder, replace the battery pack and close the battery cover. If you ever dispose of your camera, first remove the date battery for recycling according to the recycling system of your country. Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggoolen maar inleveren als KCA Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts.
Specifications All data is based on Canon’s testing standard. Subject to change without notice. PowerShot Pro1 Camera Effective Pixels Image Sensor Approx. 8.0 million 2/3-inch CCD (Total number of pixels: Approx. 8.3 million) Lens 7.2 (W) – 50.8 (T) mm (35mm film equivalent: 28 (W) – 200 (T) mm) f/2.4 (W) – f/3.5 (T) Digital Zoom Approx. 3.2x (Up to approx. 22x in combination with the optical zoom) Viewfinder Color LCD viewfinder Picture coverage 100% Dioptric adjustment –5.5 to +1.
Exposure Control System Exposure Compensation Sensitivity White Balance Built-in Flash Program AE, Shutter-priority AE, Aperturepriority AE or Manual exposure control AE lock is available. ± 2.0 stops in 1/3-stop increments Auto exposure bracketing (AEB) is available. Auto, ISO 50/100/200/400 equivalent TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H or Flash) or custom (Custom1/Custom2) Auto*, on*, off * Red-eye reduction is available.
Wireless Control Shooting and playback are available (wireless controller is included in the camera kit). When shooting, image is captured instantly/ approx. 2-sec./approx. 10-sec. after shutter button is pressed. PC-controlled Shooting Available (USB connection only. Exclusive software program is included in the camera kit.) Recording Media CompactFlash™ (CF) card (Type I and Type II) File Format Design rule for camera file system and DPOF compliant Still images: JPEG (Exif 2.
My Camera Settings Interface Power Source Operating Temperature Operating Humidity Dimensions Weight: The start-up image, start-up sound, shutter sound, operation sound and self-timer sound can be customized using the following methods: 1. Using the images and sounds recorded on a camera. 2. Using downloaded data from your computer using the supplied software. USB (mini-B, PTP [Picture Transfer Protocol]) Audio/Video output (NTSC or PAL selectable, monaural audio) 1.
Battery Performance Number of Images Shot LCD Monitor On Viewfinder On Battery Pack BP-511A (Fully charged) Approx. 420 images Approx. 420 images Playback Time Approx. 400 minutes • The data above reflects standard Canon testing conditions.The actual figures will vary according to the shooting conditions and settings. • Movie data is excluded. • At low temperatures, the battery pack performance may diminish and the low battery icon appear very rapidly.
CF Cards and Estimated Capacities (Recordable Images) CF card included with the camera FC32M L (Large) 3264 x 2448 pixels M1 (Medium 1) 2272 x 1704 pixels M2 (Medium 2) 1600 x 1200 pixels M3 (Medium 3) 1024 x 768 pixels S (Small) 640 x 480 pixels RAW 3264 x 2448 pixels 640 x 480 pixels Movie 320 x 240 pixels 160 x 120 pixels 8 14 30 14 27 54 30 54 108 53 94 174 120 196 337 2 30 sec 91 sec 242 sec FCFCFC64MH 128M 256MH 17 35 72 29 59 120 62 125 252 30 61 123 54 110 222 110 220 443 61 122 246 109 219 440 21
Image File Sizes (Estimated) Compression Resolution L M1 M2 M3 S RAW Movie (3264 x 2448 pixels) (2272 x 1704 pixels) (1600 x 1200 pixels) (1024 x 768 pixels) (640 x 480 pixels) (3264 x 2448 pixels) (640 x 480 pixels) (320 x 240 pixels) (160 x 120 pixels) 3436 KB 2002 KB 1002 KB 570 KB 249 KB 2060 KB 1116 KB 558 KB 320 KB 150 KB 9020 KB 990 KB/sec 330 KB/sec 120 KB/sec Battery Charger CG-580* Input voltage: Rated output: Operating temperatures: Dimensions: Weight: AC 100 V – 240 V (50/60 Hz) 22 VA (100
Battery Pack BP-511A Type: Nominal voltage: Nominal capacity: Charge cycles: Operating temperatures: Dimensions: Weight: Rechargeable lithium ion cell 7.4 V 1390 mAh Approx. 300 0 – 40 °C (32 – 104 °F) 38 x 55 x 21 mm (1.5 x 2.2 x 0.8 in.) Approx. 82 g (2.9 oz.) Wireless Controller WL-DC100 Power supply: Operating temperatures: Dimensions: Weight: Lithium button battery CR2025 0 – 40 °C (32 – 104 °F) 35 x 6.5 x 56.6 mm (1.4 x 0.3 x 2.2 in.) Approx. 10 g (0.4 oz.
Tele-converter TC-DC58A (Sold Separately) Magnification: Focal length: Lens configuration: Focusing range (from tip of lens): Thread diameter: Dimensions: Weight: Approx. 1.5x Infinity 5 elements in 3 groups 2.2 m – Infinity (7.2 ft. – Infinity) (when attached to PowerShot Pro1 at 126 mm – telephoto end) 58 mm Standard filter threads (Conversion Lens Adapter LA-DC58C is required to install the lens on a PowerShot Pro1) Diameter: 92 mm (3.6 in.)/Length: 70 mm (2.7 in.) Approx. 520 g (18.3 oz.
Index A Adobe RGB . . . . . . . . . . . . . 98 AEB Mode . . . . . . . . . . . . . 100 AE Lock . . . . . . . . . . . . . . . 104 AF Frame . . . . . . . . . 53, 89, 90 AF Mode . . . . . . . . . . . 47, 116 Aperture-Priority AE ( ) . . 85 Aperture Value . . 81, 82, 85, 87 Automated Playback (Slide Show) . . . . . . . 48, 133 Auto Mode ( ) . . . . . . . . 53 Auto Power Down . . . . . . . . 50 Auto Rotate . . . . . . . . . 50, 119 B Battery Battery pack change status . . . . . . . . . . . . . 22 Charging . . .
F L FE Lock . . . . . . . . . . . . . . . 106 File Format . . . . . . . . . . . 55, 60 File Number . . . . . . 37, 50, 120 Reset . . . . . . . . . . . 50, 120 Flash Exposure Compensation . . . . . . 107 Externally Mounted Flash . . . . . . . . . . . . . 171 Flash Adjust . . . . . . 46, 107 Flash Output . . . . . . . . 108 Switching the Timing . . . . . . . . . 46, 109 Flash Pop-up Function . . . . . . . . 46, 63, 65 Focus Bracketing (Focus-BKT Mode) . . . . . 102 Focus Lock . . . . . . . . . . . .
O S Operation Sound . . 49, 51, 154 Overexposure Warning . . . . 39 Safety Shift . . . . 47, 83, 85, 86 Saturation . . . . . . . . . . . . . . 97 Save Settings . . . . . . . . . . . 48 Self-Timer . . . . . . . . . . . 47, 77 Sound . . . . . . . 49, 51, 154 Sharpness . . . . . . . . . . . . . . 97 Shooting Checking Images (Reviewing) . . 48, 54, 56 Using a TV for Viewing . . . . . . . . . . 153 Shooting Mode . . . . . . . 29, 31 Functions Available . . 202 Shutter Button . . . . . . .
T Tele-converter . . . . . . . . . . 177 Telephoto . . . . . . . . . . . . . . . 39 Terminal Cover . . . . . . . 12, 19 Transfer Order (Image Transmission Settings) . . . . . . . . . . 49, 147 Selecting Images . . . . . 147 U Using the Built-In Flash . . . . 62 V Video System . . . . . . . . 50, 153 Viewfinder . . . . . . . . 12, 33, 34 Volume . . . . . . . . . . . . . . . . . 49 W White Balance . . . . . . . . . . . 93 Wide Angle . . . . . . . . . . . . . 39 Wireless Controller . . . . . .
MEMO 199
MEMO 200
FCC Notice Digital Camera, Model PC1057 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode. You can shoot with the settings saved in the C1 or C2 mode (p. 116).
Macro Mode Super Macro Mode Safety Shift Digital Zoom On Off On Off Exposure Compensation Evaluative Metering CenterLight Meter- Weighted Averaging ing System Spot Metering Center AF Point AE Lock/FE Lock AEB Bracket Focus-BKT (1) White Balance (2) Photo Effect Contrast/Sharpness/Saturation Continuous Focus settings Single ISO Speed Standard Color Space Adobe RGB On Reverse Display Off On Auto Rotate Off ND Filter { – – – { {* – { – – – { {* { – – – – { {* { { – – – { {* { { – – – – – U { – – – – –
