ENGLISH DIGITAL CAMERA Camera User Guide Camera User Guide z Please read the Read This First section (p. 6). CDI-E176-010 XXXXXXXX © 2005 CANON INC. PRINTED IN JAPAN z Please also see the Software Starter Guide and the Direct Print User Guide.
Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software This Guide Connecting the Camera to a Computer This Guide Software Starter Guide Downloading Images to a Computer Direct Print User Guide Printer User Guide Using the Printer and Printing Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor and Viewfinder The LCD monitor and viewfinder are produced with extremely highprecision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
About This Guide Conventions Used in the Text Icons appearing below titles indicate the modes that support that operation. In the example below, the mode dial can be used in the following shooting modes. • • (Auto) • (Movie) • (Manual) • (Landscape) • (Special Scene) (My Colors) Mode Dial : This mark denotes issues that may affect the camera's operation. : This mark denotes additional topics that complement the basic operating procedures.
Table of Contents Items marked with procedures. are lists or charts that summarize camera functions or 1 2 Read This First 3 Chapter 1 Preparing the Camera 4 Components Guide .................................................................................................12 Operation Panel ......................................................................................................14 Installing the Batteries......................................................................................
Moving Even Closer (Super Macro Shooting) ........................................................ 57 Using the Self-timer ......................................................................................... 59 Using the Digital Zoom ........................................................................................... 61 Continuous Shooting ....................................................................................... 62 Shooting a Movie ..................................................
Chapter 8 Camera Settings 1 Setting the Power Saving Function.......................................................................123 Setting the Auto Rotate Function ..........................................................................124 Resetting the File Number ....................................................................................125 Customizing the Camera (My Camera Settings).........................................................
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
About the Memory Card Store the memory card out of the reach of children and infants. It may be swallowed accidentally. If this occurs, consult a doctor immediately. Warnings z Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight.
z Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that water or other foreign substances enter the interior, immediately turn the camera's power off and remove the batteries or unplug the power cord from the power outlet.
z Please use Canon AA-size NiMH batteries and charger recommended for use with these batteries. Use of another charger may cause batteries to overheat or deform, posing risk of fire injury and damage to the surroundings. z Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging and when they are not in use to avoid fire and other hazards. Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.
z Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug. z If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for an extended period as your hands may experience a burning sensation. Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields.
Read This First 11
Preparing the Camera Components Guide DC IN Terminal p. 163 AF-assist Beam Neck Strap Mounts Flash p. 40 DIGITAL Terminal p. 133 Microphone (L) p. 115, 116 Self-timer Lamp p. 59 Tally Lamp p. 64, 77 Lens Red-eye Reduction Lamp p. 40 Terminal Cover Memory Card Slot Cover p. 18 Microphone (R) p. 115, 116 Battery Cover p. 16, 164 Tripod Socket p. 159 Ring Release Button p. 157 The following cables are used to connect the camera to a computer or printer. Computer (p.
1 Preparing the Camera Attaching the Neck Strap Attach the strap as illustrated. Check that the strap does not come loose from the strap mount when pulled. Perform the same steps on the other side of the camera. Avoid waving the camera about or catching it on other items when suspending it from the strap. Attaching the Lens Cap Fit the lens cap over the lens casing so that it covers the entire lens. Always replace the lens cap after use. Attach the lens cap cord to the strap.
Operation Panel Zoom Lever Shooting: (Telephoto)/ Playback: (Zoom in)/ (Wide Angle) p. 33 (Zoom out) p. 43 (Self-timer)/ (Continuous) Button p. 59, 62 MF (Manual Focus) Button p. 111 Power/Mode Indicator A/V OUT(Audio/Video Out) Terminal p. 140 OFF Button Shutter button p. 34 Mode Lever p. 24 Omni Selector S (Up) T (Down) W (Left) X (Right) (Flash)/ (Microphone) Button p. 40, 115 SET/ (AF Frame Selector) Button p. 88 Indicator MENU Button p. 74 Movie Button p. 64 FUNC.
eative Cr one Z Mode Dial Auto n e : Auto p. 33 The camera automatically selects settings. z Image Zone p. 49 The camera automatically selects settings according to the image composition type. : Portrait : Landscape : Night Scene : Special Scene : My Colors : Stitch Assist p. 52 : Movie p. 63 z 1 Preparing the Camera Use the mode dial to switch between the Shooting modes. Im age Zo z Creative Zone p. 84 The user selects exposure, aperture or other settings to achieve special effects.
Installing the Batteries Install the batteries to get ready for shooting. Please use four AA-size alkaline batteries or separately sold nickel metal hydride (NiMH) batteries. The use of the separately sold Compact Power Adapter CA-PS700 is recommended to power the camera during long usage sessions (p. 163). The separately sold battery charger kit lets you use rechargeable NiMH batteries to power the camera (p. 160). Battery Performance (p.
z While it is possible to use AA-size nickel-cadmium batteries, performance is unreliable and their use is not recommended. other devices. The partially used batteries may leak. z Be careful to load the batteries with their positive (+) and negative (-) ends in the right direction. z Never mix batteries of different types or from different manufacturers. All four batteries should be identical. z Before inserting the batteries, wipe the battery terminals well with a dry cloth.
Battery Status Indications The following icons or messages indicate the battery status on the LCD monitor (or viewfinder). Batteries are beginning to run low. Replace or recharge the batteries if you wish to continue using the camera. Change the batteries. The batteries are discharged and the camera can no longer operate. Replace the batteries immediately. Installing the Memory Card Write-Protect Tab The memory card has a write-protect tab.
2 Insert the memory card. 1 Front 3 Preparing the Camera z Push as indicated on the back of the memory card slot cover until it clicks into place. z Do not touch or allow metal objects to contact the terminals on the back of the memory card. Close the memory card slot cover. b a To Remove the Memory Card Push in the memory card until you hear it click, then release it. z When the indicator blinks red, the camera is writing, reading, erasing or transmitting an image to or from the card.
Formatting a Memory Card You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. 1 Turn the power on. p. 23 2 Press the MENU button and use the X button on the omni selector to select the [ (Setup)] menu. The [ 3 20 (Setup)] menu appears. Use the S or T button on the omni selector to select [Format], then press the SET button.
4 1 The indicator blinks red and formatting starts. Wait until the indicator goes off. z Normal formatting begins. Indicator z To perform a low level format, use the S or T button to select [Low Level Format] and the W or X button to add a check mark. z To cancel instead of formatting, select [Cancel] and press the SET/ button. z If [Low Level Format] is selected, you can stop formatting partway by pressing the SET/ button.
Memory Card Handling Precautions Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card. Do not allow dirt, water or foreign objects to contact the terminals on the back of the card. Do not touch the terminals with your hands or metal objects. Do not peel away the original label on the SD card or cover it with another label or sticker.
Turning the Power On/Off * For printer connection mode, see the Direct Print User Guide. For computer connection mode, see the Software Starter Guide. 1 Turn the mode lever to (Shooting) or (Playback) while pressing the release button. The power/mode indicator lights orange or green. release button 2 Press the OFF button to turn the power off. You will hear a start-up sound and see the start-up image when you turn on the power (p. 127).
Switching Between Shooting and Playback You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or deleting an image immediately after it is shot. Shooting Mode Playback Mode Turn the mode lever to (p. 23). (Playback) while pressing the release button z The camera switches to Playback mode, but the lens does not retract (the lens will retract if you turn the mode lever to Shooting Mode (Playback) once more).
Use the S or T button on the omni selector to select [Date/Time], then press the SET button. 3 Sets the date and time and the date format. 1 Preparing the Camera 2 z Use the W or X button on the omni selector to select the item you wish to set and set its value using the S or T button on the omni selector. z The date can be set up to the year 2037. 4 Check that the date and time display correctly, press the SET button and press the MENU button. Setting the Language 1 Turn the camera on (p.
z In Playback mode, you can change the language by holding the SET button while you press the JUMP button. This operation cannot be performed during movie playback, in the jump search mode (p. 46) or while connected to a separately sold printer. 2 Use the S or T button on the omni selector to select [Language], then press the SET button. 3 Use the S, T, W or X button on the omni selector to select a language, then press the SET button. 4 Press the MENU button.
Using the Viewfinder and the LCD Monitor Pressing the DISP. button switches the display mode. Also, closing the LCD monitor causes the viewfinder to display. LCD Monitor Display (No Information) (p. 29) : Press the DISP. button. LCD Monitor Display (Information View) (p. 29) Viewfinder Display (No Information) (p. 29) Viewfinder Display (Information View) (p. 29) when the LCD monitor is open when the LCD monitor is closed Playback Mode No Information (p. 30) Standard Display (p.
Fold the LCD monitor back against the camera body until it clicks into place. z If it is not fully closed, the image will appear reversed. Always keep the LCD monitor closed to protect it when the camera is not in use. Using the Viewfinder If the surroundings are too bright (for example, when you are shooting outdoors) and images on the LCD monitor are not clear, use the viewfinder for shooting. Adjust the viewfinder focus (p. 27) with the diopter adjustment dial (p.
Display Contents 1 Shooting Information (Shooting Mode) Preparing the Camera Low Battery (p. 18) Metering Method (p. 89) Digital Zoom*1 (p. 61) Drive Mode (p. 59, 63) AF Frame*2 Green: Focusing Complete Yellow: Focusing Difficulty Buffer Warning*3 Remaining Movie Time (Shooting Mode)/ Movie Elapsed Time*4 (Shooting Mode) Flash (p. 40) Macro (p. 56, 57) Auto Rotate (p. 124) Save Settings (p. 113) -2 − +2 Exposure Compensation (p. 90) z Rec*4 While shooting a movie White Balance (WB) (p.
*1 Zoom powers reflect the combined optical and digital zoom effects. Optical zoom is displayed in white up to "12x", the optical telephoto limit. It does not appear when "digital zoom" is disabled. When digital zoom is enabled, the zoom value is displayed in blue. *2 The AF frame does not appear when it is set to Auto or during Reverse Display. *3 This is not normally displayed. It appears when remaining available internal memory (buffer) is half or less during movie recording. (p.
Playback Information–Detailed (Playback Mode) 1 File number Preparing the Camera Histogram (p. 32) ISO Speed (p. 93) White Balance (WB) (p. 91) Macro (p. 56) Flash Adjust/Flash Output (p. 106) Shooting Modes (p. 49, 84) Shutter speed Aperture value Metering Method (p. 89) Photo Effect (p. 94) Resolution (Movies) (p. 38) Frame Rate (p. 67) My Colors (p. 95) -2 − +2 Exposure Compensation (p. 90) Manual Focus (p. 111) The following information may also be displayed with some images.
While a recorded image is displayed on the LCD monitor, you can check the exposure with the graph (see Histogram Function (p. 32)) that shows the distribution of the brightness data. If the exposure requires adjustment, set the exposure compensation (p. 90) and reshoot. Press the DISP. button if the histogram and other information are not shown.
Shooting-The Basics Auto Mode 1 Turn the mode lever to (Shooting). 2 Shooting-The Basics 2 Set the mode dial to 3 If you are using the LCD monitor, open it. (p. 77) 4 Aim the camera at the subject. 5 Use the zoom to achieve the desired composition in the LCD monitor (or viewfinder). . Wide angle Telephoto z Turning the zoom lever toward magnifies the subject (telephoto). Turning the zoom lever toward decreases the size of the subject (wide angle).
6 Lightly press the shutter button (pressing halfway) to focus. Two beeps will sound when the camera has finished focusing, and the AF frame appears green. z The AF frame will light yellow and the beep will sound one time if the subject is difficult to focus on. z The shutter speed and aperture value are automatically determined and show on the LCD monitor (or viewfinder). In addition, the camera will automatically set the focus. 7 Press the shutter button all the way.
Image Stabilizer Function The image stabilizer function allows you to minimize the camera shake effect (blurred images) when you shoot distant subjects that have been magnified or when you shoot in dark conditions. This function's default setting is [On]. 1 From the [ (Rec.)] menu, select [IS Mode], and press W or X button. z Selecting Menus and Settings (p. 73) z [Continuous], [Off], [Shoot Only] and [Panning] can be selected. Continuous Image stabilization is always active.
The following icons appear on the LCD monitor (or viewfinder) if it is set to Information View display. [Continuous] [Shoot Only] 2 [Panning] With no lens converter – With separately sold teleconverter mounted p. 158 With separately sold wide converter mounted p. 158 Press the MENU button. z Camera shake may not be fully corrected when shooting with slow shutter speeds, such as with evening shots. In this case, affix the camera to a tripod.
Press the shutter button halfway again to stop displaying it and shoot an image. Changing the Review Duration 1 Select [Review] from the [ (Rec.)] menu and use the W or X to select the duration setting. z Selecting Menus and Settings (p. 73) Off: Images do not display 2 to 10 sec.: Images appear for the time selected even if the shutter button is released. Hold: The image is displayed until the shutter button is pressed again halfway. 2 Press the MENU button.
Changing Resolution/Compression Settings Mode Dial You can change the resolution, compression (still images) and resolution/ frame rate (movies, p. 67) settings to suit the purpose of the image you are about to shoot. Still Images Resolution Display Purpose Pixels L (Large) 2592 × 1944 M1 (Medium 1) 2048 × 1536 M2 (Medium 2) 1600 × 1200 S (Small) 640 × 480 Large z Print larger than A4-size prints* 210 x 297 mm (8.3 x 11.7 in.) z Print A4 size* 210 x 297 mm (8.3 x 11.7 in.
1 Press the FUNC. button. 2 Shooting-The Basics 2 For still images, use S or T on the omni selector to select * (2592 × 1944). For movies, select * (640 × 480, 30 fps). * The current setting is displayed. 3 Use the W or X button on the omni selector to select the resolution you wish to set, then press the SET button. For movies, select the resolution and frame rate. Number of shots remaining (Only displayed when the resolution or compression is selected.
Using the Built-in Flash Use the flash according to the guidelines below. Mode Dial The flash fires with every shot. Flash is open The flash will fire automatically. Flash is closed 1 The flash will not fire. Raise the flash manually, and shoot. Press the button to switch between and (switching does not apply in some modes). A flashing red in the LCD monitor (or viewfinder) indicates insufficient light level. In this case, raise the flash before shooting.
1 Select [Red-eye] from the [ (Rec.)] menu. 2 Selecting Menus and Settings (p. 73) Use the W or X button on the omni selector to select [On] and press the MENU button. appears on the LCD monitor (or viewfinder) if it is set to Information View display. Red-Eye Reduction Light reflecting back from eyes can make them appear red when the flash is used in dark areas. Under these conditions, use the red-eye reduction mode.
1 Select [Slow Synchro] from the [ (Rec.)] menu. Selecting Menus and Settings (p. 79) 2 Use the W or X button on the omni selector to select [On] and press the MENU button. When shooting with a high ISO sensitivity and using the built-in flash, there is more of a chance of overexposure the closer you are to the subject. 42 The flash fires with automatic adjustments when [Flash Adjust] is set to [Auto] in the Rec. menu. Automatic adjustment sets the flash intensity (p. 106).
Playback-The Basics Displaying Images Individually 1 Turn the mode lever to the right to set the camera to Playback mode. The last recorded image appears on the LCD monitor (or viewfinder). 3 Move between images using the W or X arrow on the omni selector. z Use W to move to the previous image and X to move to the next. Hold down the button to advance through the images more rapidly, but the images will not appear as clearly. z Press the DISP. button to show the data for the displayed image (p. 27).
z You can move around the image using ST or WX on the omni selector. z You can also cancel it immediately by pressing the MENU button. z Movie frames and index playback images cannot be magnified. z You can magnify an image while it is displayed on the LCD monitor (or viewfinder) immediately after the image is shot (p. 36). 2 Press the SET button. z The image advance mode is activated, and using the W or X button, the preceding or next image can be displayed at the same level of magnification.
3 Press the zoom lever toward . Index playback cancels and the display reverts to single image playback. 3 1 Playback-The Basics JUMP The display jumps nine images at a time In index playback mode (p. 44), press the JUMP button. The jump bar will display. Jump Bar 2 View the previous or next nine images using W or X button on the omni selector. Hold the SET button down and press the W or X button to jump to the first or last set. 3 Press the JUMP button.
JUMP Jumping to Images When you have many images recorded onto a memory card, it is handy to use the four search keys below to jump over images to find the object of your search. z z z z Jump 10 Images: jumps over 10 images at a time Jump 100 Images: jumps over 100 images at a time Jump Shot Date: jumps to the first image with the next shooting date Jump to Movie: jumps to a movie (playback is available) 1 In Single Image playback mode (p. 43), press the JUMP button.
Erasing Erasing Single Images Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. 1 Use the W or X button to select an image for deletion and press the button. 4 Erasing 2 Use the W or X button on the omni selector to select [Erase], then press the SET button. z To exit instead of erasing, select [Cancel]. Protected images cannot be erased with this function (p. 121).
Erasing All Images Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. 1 Select [Erase all] from the [ SET button. (Play)] menu and press the Selecting Menus and Settings (p. 73) 2 Use the W or X button on the omni selector to select [OK], then press the SET button. To cancel instead of erasing, select [Cancel]. 48 You should format the memory card when you want to erase not only image data but also all the data contained on the card (p. 20).
Useful Shooting Functions Using the Mode Dial (Image Zone) Settings fitting the shooting conditions of your subject can easily be set using the mode dial. Landscape Portrait Movie p. 63 Use this mode to shoot movies. Sound is also recorded simultaneously. 5 Blurs the background and makes a person stand out. Useful Shooting Functions Use this mode to shoot spacious landscape scenes. Night Scene Special Scene p.
Some settings can be changed in each shooting mode (p. 184). Observe the following precautions according to the selected function. You can achieve a better blurring effect of the background by making sure the upper half of your subject fills the entire LCD monitor (or viewfinder). You can enhance the blurring effect of the background even more by setting the lens to its maximun telephoto setting.
Foliage Snow Beach Fireworks Indoor Night Snapshot Turn the mode dial to Scene Mode). 2 Use W or X to select a shooting mode. Useful Shooting Functions 1 (Special z The icon of the selected shooting mode appears on the LCD monitor. z Shooting procedures are the same as for the Auto Mode (p. 33). z You can shoot right after selecting an option. And you can immediately change the shooting mode. The shutter speed is slow in tripod to avoid camera shake. 5 (fireworks) mode.
See page 184 for settings that can be changed in this mode. Results may vary depending on the subject. Shooting Panoramic Images (Stitch Assist) Use this mode to shoot a series of overlapping frames for merging (stitching) into a large panoramic image using a computer. Please use the bundled PhotoStitch program to merge the images on a computer.
Framing a Subject The PhotoStitch program detects the overlapping portions of adjoining images and merges them. When composing shots, try to include a distinctive item (landmark) in the overlapping portions. 5 Compose each frame so that it overlaps 30 - 50% of the adjoining image. Try to keep the vertical misalignment to less than 10% of the image height. Do not include moving items in the overlap. Do not try to stitch images that include both distant and close items.
See page 184 for settings that can be changed in this mode. Digital zoom is not available. A custom white balance (p. 92) setting cannot be set in (Stitch Assist mode). To use a custom white balance setting, first set it in another shooting mode. The settings for the first image are used to take subsequent images in the sequence. Even when connected to a TV, the image displayed on the TV cannot be shot.
4 Compose the second image so that it overlaps a portion of the first and shoot. Sequence 5 Useful Shooting Functions z Minor discrepancies in the overlapping portions can be corrected when the images are stitched together. z An image can be retaken. Press the S, T, W or X button on the omni selector to return to that frame. z A maximum of 26 images can be recorded either horizontally or vertically. Sequence 5 Repeat the procedure for additional images. 6 Press the SET button after the last shot.
z The tally lamp blinks red during movie recording and goes off when the recording session is over. When [Tally Lamp] is set to [Off] in the Rec. menu, the lamp does not blink (p. 77). Shooting a Movie (p. 63) Changing resolution and frame rate (p. 67) The Movie icon appears on the LCD monitor (or viewfinder). The evaluative light metering mode is enabled (p. 89). The AF frame does not display. When you stop shooting the movie, the camera reverts to the last still image settings.
After two seconds To Cancel Macro Mode Press the button so that 5 no longer displays. Macro mode remains active after shooting a photo. Photo Tips and Information (p. 174) Image Area in Macro Mode When the zoom is set between the maximum telephoto and wide-angle settings, the effective distance from the lens to the subject becomes the same as for the maximum telephoto setting. Zoom Setting Maximum wide angle* Distance from Lens to Subject 10 cm (3.9 in.) Image Area 118 x 87 mm (4.6 x 3.4 in.
1 Repeatedly press the button to display on the LCD monitor. Pressing the button again cancels the Super Macro mode (Macro mode is also canceled). Be careful to avoid damaging the lens when shooting in Super Macro mode. 58 Digital zoom is not available. When Super Macro mode is enabled, digital zoom is canceled and the zoom is set to maximum wide-angle. The image area when closest to the subject is as follows: Zoom position Image Area Maximum wide angle 22 x 16 mm (0.87 x 0.63 in.
Using the Self-timer Mode Dial 1 Press button. The current setting is displayed. z Pressing the button cycles between settings. 5 * 2 Check that , or is displayed and shoot the image. z When is selected, the self-timer sounds and the self-timer lamp starts blinking when the shutter button is pressed all the way. The blinking gets faster approximately 2 seconds before the shutter trips.
Changing the Delay Time and Number of Shots (Custom Timer) You can set the self-timer delay and number of shots to be taken. 1 In the [ (Rec.)] menu, select [Self-timer]. z Selecting Menus and Settings (p. 73) z These settings are not available when (My Colors), (Stitch Assist) or (Movie) is displayed. 2 Select 3 Select the timer delay and number of shots. and press the SET button. c Use the W or X button on the omni selector to set the delay.
Using the Digital Zoom Mode Dial With the combined optical and digital zoom functions, images can be zoomed as follows: 15x, 19x, 24x, 30x, 37x and 48x. Images become coarser the more they are digitally zoomed. To zoom back out, turn the zoom lever toward . 5 Turn the mode dial to any Shooting mode except . 2 Select [Digital Zoom] from the [ (Rec.)] menu, select [On] with the W or X button, then press the MENU button. or See Selecting Menus and Settings (p.
Continuous Shooting Mode Dial Use this mode to shoot successive frames while the shutter button is fully pressed. Recording ceases when the shutter button is released. Smooth continuous shooting at a constant interval can proceed until the memory is full.*1*2 Standard Continuous Mode Approx.1.5 shots/second*2*3 Recommended when you want to confirm the subject during continuous shooting. High-Speed Continuous Shooting Recommended when you want the briefest shutter Approx. 2.
The interval between shots may lengthen when the camera's built-in memory fills. If the flash is firing, the interval between shots will lengthen to accommodate the flash's charging requirements. Selecting a Continuous Shooting Method Select either standard or high-speed continuous shooting. Select [Cont. Shooting] from the [ (Rec.)] menu. Useful Shooting Functions 1 5 z Selecting Menus and Settings (p. 73) z Select a mode that supports continuous shooting.
2 Press the Movie button. The camera beeps once and shooting starts. Sound is recorded simultaneously. z When the Movie button is pressed again, the camera beeps twice and shooting stops. z The tally lamp blinks red during movie recording and goes off when the recording session is over. When [Tally Lamp] is set to [Off] in the Rec. menu, the lamp does not blink (p. 77). z The maximum recording capacity is 1 GB. These figures will vary according to the type of memory cards and their capacity.
See page 184 for settings that can be changed in this mode. Resolution/Frame Rate (p. 38) The following operations are available during movie recording: - Zoom, digital zoom - AF lock: Pressing the MF button activates AF lock with the current conditions. appears on the LCD monitor (or viewfinder). You can cancel AF lock by pressing the MF button again. When registered to the shortcut button, pressing the button executes auto-focus and locks again ( appears). - Manual Focus (p.
Shooting Still Images while Shooting a Movie You can shoot a still image while shooting a movie. Mode Dial 1 While shooting a movie, press the shutter button halfway to focus. Press the shutter halfway so the camera can focus and set exposure for the still image. During this process, movie shooting continues. 2 Press the shutter button all the way to shoot the image. z The movie goes black for an instant while the still image is shot, and then returns to normal.
Changing Resolution and Frame Rate In any shooting mode, movie resolution and frame rate can be set. 1 Press the FUNC. button. 5 Useful Shooting Functions 2 Use the S or T button on the omni selector to select *, then select the desired movie resolution and frame rate settings using the W or X button. * The current setting is displayed. Icon Resolution Frame Rate (640 ¯ 480 pixels) 30 frames/sec. (640 ¯ 480 pixels) 15 frames/sec. (320 ¯ 240 pixels) 30 frames/sec.
Changing the Sound Mode Mode Dial Microphone level (sound recording level), wind filter and sampling rate can be changed. 1 Select [Audio] in the [ (Set up)] menu and press the SET button. Selecting Menus and Settings (p. 73) 2 Use the S or T button to select [Mic Level] and set the sound level with the W or X button. 3 Use the S or T button to select [Wind Filter] and select [On] or [Off] with the W or X button. z This suppresses noise when the wind is strong. z The default setting is Off.
5 Press the MENU button twice. Even if the recording volume becomes too loud, it automatically adjusts to avoid distortion of loud sounds. Wind filter suppresses noise that occurs in locations with strong wind. However, unnatural sound can result when used to record in locations with no wind. 5 You can play back recorded movies and delete unwanted portions from the beginning or the end of movie clips. z Protected movies cannot be edited (p. 121).
Movie Control Panel (Exit): Back to the screen in Step 1 (Print): Movies can be printed. See the Direct Print User Guide for details. (This icon appears when a printer is connected) (Play): Starts playback of movies and sound Movie Control Panel (Slow Playback): During slow playback, Playback Sound Level playback speed can be changed by WX. X speeds up and W slows down.
3 After selecting (Edit), use the S or T button on the omni selector to select (Cut Beginning) or (Cut End) from the movie editing panel.
6 Use the W or X button to select [Overwrite] or [New File] and press the SET button. Overwrite: Saves the edited movie with its original name. The pre-edit data is lost. New File: Saves the edited movie under a new file name. The pre-edit data is left unchanged. Cancel: Reverts to the screen in Step 3 without saving. When there is not enough space left on the memory card, only the overwrite function is available. If this happens, S appears on the counter of the movie editing bar.
Shooting-Advanced Functions Selecting Menus and Settings Selecting Settings by Pressing the FUNC. Button (Only in Shooting Mode) Some menu options may not be displayed in certain shooting modes. Turn the mode lever to . Press the FUNC. button. Press the S or T button to select a function item. Press the W or X button to select setting contents. 6 Press the FUNC. button. Shooting-Advanced Functions Shoot the image.
Selecting Settings by Pressing the MENU Button Press the MENU button. Press the W or X button to switch between menu tabs. Playback Shooting Press the S or T button to select a menu item. (Depending on the function, press the SET or X button after making a selection.) Press the W or X button to select setting contents. (Depending on the function, press the SET button after making a selection.) Press the MENU button. Shoot the image if in Shooting mode. Rec.
Rec. Menu Set up Menu 6 Shooting-Advanced Functions (p. 79) (p. 76) My Camera Menu Play Menu (p. 127) (p.
Some menu items may not be available for selection according to the shooting mode (p. 184). You can apply a desired image and sound to and in the My Camera menu. For details, see Registering the My Camera Settings (p. 128) or the Software Starter Guide. Camera settings can be reset to the default values (p. 81). Rec. Menu Menu Item Available Settings Reference Page Flash Sync Sets the timing at which the flash fires. 1st-curtain*/2nd-curtain p.
Available Settings Reference Page When enabled, this function automatically adjusts exposure settings in the Av or Tv mode if they do not suit current exposure requirements when the shutter button is pressed halfway. On/Off* p. 87 AF Mode Sets the frequency of autofocus activation. Continuous*/Single p. 112 AF-assist Beam Enables AF-assist beam firing during auto focusing, if necessary. On*/Off p. 35 Tally Lamp Sets whether or not the tally lamp blinks during movie recording. On*/Off p.
Menu Item Reference Page Available Settings Intervalometer Shoots automatically at set intervals. 2* to 100 shots 1* to 60 min. p. 107 Set Shortcut button Selects functions to be registered on the button. (Shortcut) Save Settings Saves settings selected in the Rec. menu and the function menu to the mode dial's mode. p. 82 p. 113 * Default setting Play Menu Menu Item Available Settings Reference Page Protect Protects images from accidental erasure. p.
Set up Menu Available Settings Reference Page Set [On] to mute the start-up sound, operation sound, selftimer sound and shutter sound all at once. z If you set [Mute] to [On], no sound will be heard even when any sound item in the My Camera menu is set to , or (On). z However, a warning will still sound when the memory card slot cover is opened while an image is being written to the memory card even if the [Mute] function is set to [On].
Menu Item Available Settings Reference Page Power Saving Sets whether or not the camera automatically powers down or the LCD monitor (or viewfinder) goes off after a specified period of time elapses without camera operation. Auto Power Down On*/Off Display Off 10 sec./20 sec./30sec./1 min.*/2 min./3 min. p. 123 Date/Time Sets the date and time and the date format.* p. 24 Format Formats (initializes) memory cards.* p. 20 File No.
My Camera Menu Menu Item Theme Available Settings Reference Page Selects a common theme for each My Camera settings item. p. 127 Start-up Image Sets the start-up image when you turn on the camera. p. 127 Start-up Sound Sets the start-up sound when you turn on the camera. p. 127 Operation Sound Sets the sound when the omni selector or any button other than the shutter button is pressed. p. 127 Selftimer Sound Sets the sound informing you that the photo will be taken in 2 seconds. p.
z The following settings cannot be reset to default: - [Date/Time], [Language] in the [ (Set up)] menu - Colors specified in the Color Accent or Color Swap modes Mode Settings - White balance data set with the custom white balance function (p. 91) - Newly registered My Camera settings z Settings cannot be reset when the camera is connected to a computer or printer. When the camera is in Shooting mode and the mode dial is set to only the mode settings revert to defaults.
Registering a Function 1 Select [Set Shortcut button] from the [ (Rec.)] menu and press the SET button. z See Selecting Menus and Settings (p. 73). 2 Use the W or X button to select the function you wish to register and press the SET button.
Using the Mode Dial (Creative Zone) Mode Dial You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes. After settings are made, shooting procedures are the same as for Auto Mode (p. 33). See page 184 for settings that can be changed in this mode. How to Use the Mode Dial 1 Check that the camera is in Shooting mode. z The power/mode indicator lights orange. 2 Turn the mode dial, select the function you wish to use and shoot the image.
For information on the relation between the aperture value and shutter speed, see page 85. Please note that camera shake becomes a factor at low shutter speeds and with larger aperture values. If (camera shake warning) or (flash warning, in red) appears in the LCD monitor (or viewfinder), try the following steps to resolve the problem. - Raise the flash to enable firing - Use the (image stabilizer) function (p. 35). - Use a tripod. 6 Program AE z Use the flash. z Adjusting the ISO Speed.
z If the image would be underexposed (too dark) or overexposed (too bright) and the correct exposure cannot be obtained, the aperture value display on the LCD monitor (or viewfinder) turns red. Adjust the shutter speed with the W or X button so that the aperture value display turns white. z The nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.
Setting the Aperture When you set the aperture in the aperture-priority AE mode, the camera automatically selects a shutter speed to match the brightness. Selecting a lower aperture value (opening the aperture) allows you to blur the background and create a beautiful portrait. A higher aperture value (closing it) brings the entire range from foreground to background into focus. The larger the aperture value, the greater the range of the image brought into clear focus.
shoot a subject in a dark place and set the flash to (Flash On with redeye reduction) or (Flash On) the image will always be bright. z When you press the shutter button halfway, the difference between the standard exposure* and the selected exposure appears on the LCD monitor (or viewfinder). If the difference is more than 2 stops, "-2" or "+2" appears on the LCD monitor (or viewfinder). * The standard exposure is calculated by the AE function according to the selected metering method.
Switching between Metering Modes Mode Dial Light metering measures the brightness of a subject. By selecting the optimal mode, you can shoot a subject with the optimal exposure. Evaluative metering is the default metering mode. The camera divides images into several zones for light metering.
3 Use the W or X button to select [Center] or [AF Point], then press the MENU button. When [Spot AE Point] is set to [Center], the spot AE point frame ( ) appears at the center of the LCD monitor (or viewfinder). The AF frame can be repositioned (p. 88). With [Spot AE Point], one AE point appears ( ) within an AF frame. This frame can be moved as one piece (p. 88).
Adjusting the Tone (White Balance) Mode Dial When the white balance mode is set to match the light source, the camera reproduces colors more accurately. Combinations of setting contents and light source are as follows.
Setting a Custom White Balance In the following cases, the white balance may not be correctly adjusted. After taking a custom white balance reading with (Custom), you can start shooting. z Shooting close-ups (Macro and Super Macro) z Shooting subjects of monotone color (such as sky, sea or forest) z Shooting with a peculiar source of light (such as a mercury-vapor lamp) 1 Select * (Auto) from the FUNC. menu and select (Custom) with the W or X button. * The current setting is displayed.
- Set the flash according to shooting conditions, and select (Flash On) or (Flash Off) Use the same flash setting as the one that will be used for shooting when you set the white balance. If the white balance setting conditions and shooting conditions are not the same, the correct white balance may not be obtained. - The ISO speed is set to the same setting to shoot the image. White balance data cannot be set with (Stitch Assist), but the white data acquired in another mode can be used.
Changing the Photo Effect Mode Dial By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. * 1 , Effect Off Records normally with this setting. Vivid Emphasizes the contrast and color saturation to record bold colors. Neutral Tones down the contrast and color saturation to record neutral hues. Low Sharpening Records subjects with softened outlines. Sepia Records in sepia tones. B/W Records in black and white.
Contrast z This function allows you to adjust the degree of brightness. z Select from - (Weak), 0 (Neutral) and + (Strong). Sharpness z This function allows you to adjust how sharply outlines are defined. z Select from - (Weak), 0 (Neutral) and + (Strong). Saturation z This function allows you to adjust the color depth. z Select from - (Weak), 0 (Neutral) and + (Strong).
Darker Skin Tone* Use this option to make skin tones darker. Vivid Blue Use this option to emphasize blue tints. It makes blue subjects, such as the sky or ocean, more vivid. Vivid Green Use this option to emphasize green tints. It makes green subjects, such as mountains, new growth, flowers and lawns, more vivid. Vivid Red Use this option to emphasize red tints. It makes red subjects, such as flowers or cars, more vivid.
Changing the Save Method for the Original Image When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded. 1 In the [ (Rec.)] menu, select [Save Original]. See Selecting Menus and Settings (p. 73). 6 Shooting-Advanced Functions 2 Use the W or X button to select [On] or [Off] and press the MENU button. z The display will return to the shooting screen.
Shooting in the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white. 1 Set the mode dial to (My Colors), select (Color Accent) from the FUNC. menu and press the SET button. z See Shooting in a My Colors Mode (p. 95). z All colors but the previously specified one display in black and white. z The camera switches to color input mode and the display alternates between the original image and the color accent image (the default setting is green).
6 1 Desired Color (After Swapping) Set the mode dial to (My Colors), select (Switch Color) from the FUNC. menu and press the SET button. z See Shooting in a My Colors Mode (p. 95). z The camera will switch to color input mode and the display will alternate between the original image and the color swap image (The default color to change is green, which changes to white after setting). 2 Aim the camera so that the original color appears at the center of the LCD monitor, and press the W button.
You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. The colors specified in the color swap mode are retained even if the camera's power is turned off. Exposure compensation is disabled while (Color Swap) is enabled. Shooting in the Custom Color Mode This mode allows you to adjust the color balance for red, green, blue and skin tones. 1 Set the mode dial to (My Colors), select (My Colors) from the FUNC.
You can adjust AEB settings in 1/3 stops within ±2 EV of the standard exposure setting. AEB settings can be combined with exposure compensation settings (p. 90) to extend the adjustment range. The images are recorded in the following order: Standard exposure, underexposure and overexposure. The three shots are taken at the same interval as high-speed continuous shooting. Continuous Shooting (p. 62) 1 6 * * The current setting is displayed.
Focus Bracketing (Focus-BKT Mode) Mode Dial The camera automatically takes three shots: one at the manual focus position, and one each with focus positions preset nearer and farther. The nearer and farther focus positions can be set in three steps: large, medium and small. Images are shot with the focus position changing in the following order; current position, farther and nearer. The three shots are taken at the same interval as high-speed continuous shooting. Continuous Shooting (p.
Locking the Exposure Setting (AE Lock) Mode Dial You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. To ensure that the flash is disabled, make sure that it is in the closed position. AE lock is disabled if the flash is enabled. For flash shots, use FE lock (p. 104).
In mode, AE lock can be set or canceled (p. 65). Automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure (Program Shift). With the following procedures. 1. Turn the mode dial to , or . 2. Focus on the subject on which you wish to lock the exposure and press the shutter button halfway. 3. Press the button. The exposure setting locks and appears on the LCD monitor (or viewfinder). 4.
3 While pressing the shutter button halfway, press the button. z The flash pre-fires to acquire the exposure value required for the subject, and appears on the LCD monitor (or viewfinder). z Each time you press the button, the flash exposure locks at the required intensity for that composition. 4 Recompose the image and shoot. 6 FE Lock is not available while viewfinder).
Setting the Flash Adjustment/Flash Output Mode Dial *1 When [Flash Adjust] is set to [Manual], flash output settings can be made. *2 [Flash output] can be set. z When [Flash Adjust] is set to [Auto], settings can be adjusted in 1/3-stop Flash Exposure increments in the range of -2EV to +2EV. Compensation z You can enjoy flash photography with exposure adjustments with the combined use of the camera's exposure compensation function.
Switching the Timing at which the Flash Fires Mode Dial 1st-curtain The flash fires right after the shutter opens, regardless of the shutter speed. Usually, the 1st-curtain is used when shooting. 2nd-curtain The flash fires right before the shutter closes. Compared with the 1st-curtain, the flash fires later and this allows you to shoot images in which, for example, a car's lights seem to trail off behind.
Since the camera may shoot continuously for an extended period of time, the use of the Compact Power Adapter CA-PS700 (sold separately) is recommended (p. 163). 1 Select [Intervalometer] from the [ (Rec.)] menu and press the SET button. See Selecting Menus and Settings (p. 73). 2 Use the W or X button to select an interval time. If you press the W or X button continuously, the interval time changes in units of 5 minutes at a time.
- Operating the mode lever - Opening the memory card slot or battery cover - Turning off the power Shooting Problem Subjects for the Autofocus The autofocus may not work well on the following types of subjects.
2 Press the shutter button halfway to lock the focus. z A beep sounds and the AF frame turns green (the AF frame is not displayed with [Stitch Assist]). z The AE setting will also lock when you do this. The exposure may occasionally be incorrect if the difference in intensity between the two items is too great. In this case, shoot with AF Lock (p. 110) or AE Lock (p. 103). 3 Keep it pressed while you recompose the image and press the shutter button all the way to shoot the image.
The AF lock is convenient because you can let go of the shutter button to compose the image. In addition, since the focus stays locked to the same position even after the shot is taken, you can immediately shoot the next image with the same focus position. Because (Stitch Assist) does not display the AF frame, aim the camera to focus on the subject. In mode, AF lock can be set or canceled even during movie recording (p. 65).
2 Press the shutter button all the way to shoot the image. You can change the MF indicator displayed distance units (p. 80). Switching between Focus Settings Mode Dial You can switch between focus settings to shoot. Continuous The camera is continually focusing on whatever it is aimed even when the shutter button is not pressed, allowing you to shoot without missing opportunities. This is the default setting.
Saving Custom Settings Mode Dial You can save frequently used shooting modes and various shooting settings to the (Custom) mode. When necessary, you can then shoot images with previously saved settings by simply turning the mode dial to . Settings that are usually forgotten when the shooting mode is changed or when the power is turned off (such as Continuous Shooting and Self-timer mode) are also remembered. 1 6 Turn the mode dial to , , , or . 2 Set the setting contents you wish to save.
Playback-Advanced Functions Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. 0° (Original) 1 90° 270° Select [Rotate] from the [ (Play)] menu and press the SET button. See Selecting Menus and Settings (p. 73). 2 Use the W or X button to select an image you want to rotate and press the SET button. The image cycles to the next orientation (90° 270° original) each time the SET button is pressed. z Movies cannot be rotated.
Playback-Advanced Functions Attaching Sound Memos to Images In Playback mode (including single image playback, index playback, magnified playback and the review immediately after shooting in Shooting mode) you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in the WAVE format. 1 Press the button while playing back images. The sound memo control panel will display. 2 Use the W or X button to select (Record) and press the SET button.
z You cannot record or playback sound memos for images that already have an incompatible sound file attached. If you attempt to record or play such images, the "Incompatible WAVE format" message will display. Incompatible sound files can be deleted with this camera. z Sound memos for protected images cannot be erased (p. 121). The volume can be adjusted in the Set up menu (p. 79).
Sound Playback 1 Select [Sound Recorder] from the [ press the SET button. (Play)] menu, and See Selecting Menus and Settings (p. 73). 2 Use the S or T button to select a sound and select with the W and X, and press the SET button. Shooting Time Recording Length z Play volume can be adjusted with [Sound Volume] on the [ menu. (Setup)] Image and Sound File and Folder Numbering (p. 126). 117 7 Playback-Advanced Functions The sound plays. (Exit): Returns to the Play menu. (Record): Records sound.
Playback-Advanced Functions Automated Playback (Slide Shows) Slide show image settings are based on DPOF standards (p. 141). Starting a Slide Show A selection of images or all the images on an memory card can be displayed one- by-one in an automated slide show. All Images Slide Show 1-3 1 Plays all images on the memory card in order. Plays the images selected for each show in order (p. 119). In the [ (Play)] menu, select [Slide Show] and press the SET button. z See Selecting Menus and Settings (p. 73).
4 When the slide show is over, press the MENU button. The slide show menu appears again. Press the MENU button again to return to the play menu. Movies play for their entire recorded length regardless of the slide show time settings (p. 120). The power saving function is disabled while a slide show plays on the camera (p. 123). Select images for the Slide Show 1 Display the slide show menu (p. 118).
z Press JUMP to display the Jump Bar (p. 45). After jumping and pressing the MENU button, press the SET button to select or deselect images. Index Playback z Turn the zoom lever toward to switch to index playback (9 images). z Use the S,T,W or X button to select an image and select (deselect) by pressing the SET button. z The selection number and a check mark (3) appear at the bottom of selected images.
3 Use the S or T button to select [Play Time] or [Repeat], and set with the W or X button. Play Time z Select a play time. z When Manual is selected, use the W and X buttons to move back and forth between images after starting the slide show. Repeat z Select [On] or [Off]. 4 7 Press the MENU button. Depending on the images, the display interval may vary slightly from the setting when played. Slide shows are easy to arrange on a computer with the supplied software (ZoomBrowser EX/ImageBrowser).
2 Use the W or X button to select an image you want to protect and press the SET button. z The icon appears on protected images. z To remove the protection, press the SET button again (in protection mode). z You can make the selection of images easier by toggling between single image playback and index playback with the zoom lever. z During index playback, turn the zoom bar toward to jump nine images at a time. To select or deselect images, turn the zoom level toward to remove the Jump Bar (p.
Camera Settings Setting the Power Saving Function This camera is equipped with a power saving function. Depending on the power saving setting, the camera may power down or the LCD monitor (or viewfinder) may go off automatically. zAuto Power Down [On]: z Shooting mode: Powers down approximately 3 minutes after the last time a control is accessed on the camera.
1 Select [Power Saving] in the [ (Set up)] menu and press the SET button. See Selecting Menus and Settings (p. 73). 2 Use the S or T button to select [Auto Power Down] and select [On] or [Off] with the W or X button. 3 Use the S or T button to select [Display Off] and select the desired time with the W or X button.
2 Use the W or X button to select [On] and press the MENU button. z The display will return to the shooting or playback screen. z When this function is [On] and the camera is in shooting mode and set to Information View, an icon showing camera orientation ( : normal, : right side down, and : left side down) appears at the upper right corner of the LCD monitor (or viewfinder).
1 In the [ (Set up)] menu, select [File No. Reset]. See Selecting Menus and Settings (p. 73). 2 Use the W or X button to select [On] or [Off] and press the MENU button. Setting the File No. Reset to [Off] is useful for avoiding file name duplication when images are downloaded to a computer.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, operation, self-timer and shutter sounds. Each menu item has three choices. Changing My Camera Settings 1 Press the MENU button and press the X button twice. The [ 2 (My Camera)] menu appears. Use the S or T button to select a menu item, then select setting content with the W or X button.
Registering My Camera Settings New content can be registered to and . Images and sounds recorded on the memory card can be added as My Camera settings. You can also use the supplied software to upload your computer's images and sounds to the camera. The following menu items can be saved to the camera. • Start-up Image • Start-up Sound • Self-Timer Sound • Shutter Sound • Operation Sound The memory card images and sounds can be registered to the camera with the following procedures.
Registering Sounds for Start-Up, Operations, Self-Timer and the Shutter z Use the W or X button to select (Record) and press the SET button. Recording will start and automatically stop when the time is exceeded. Recording times for each item are as follows: Start-up Sound: 1 sec. Operation Sound: 0.3 sec. Self-timer Sound: 2 sec. Shutter Sound: 0.3 sec. z Use the W or X button to select 5 (Register) and press the SET button. Use the W or X button to select [OK] and press the SET button.
- Recorded Length 11.025kHz Start-up Sound 8.000kHz 1.0 sec. or less 1.3 sec. or less Operation Sound 0.3 sec. or less 0.4 sec. or less Self-Timer Sound 2.0 sec. or less 2.0 sec. or less Shutter Sound 0.3 sec. or less 0.4 sec. or less Any data types other than those described above cannot be used with this camera. An example of this function is to record "Say Cheese" as a self-timer sound so that the camera will replay this sound 2 seconds before the photo is taken.
Additional Features Connecting the Camera to a Computer The following methods can be used to download images recorded by the camera to a computer. Depending on the OS used, some methods may not be available. Please read Computer System Requirements (p. 132) in advance. Connect the camera to a computer with the USB cable With this method, you download images using computer commands after you have installed the appropriate software. DSee Connecting the Camera to a Computer (p.
Connecting the Camera to a Computer Computer System Requirements zWindows OS Windows 98 Second Edition (SE) Windows Me Windows 2000 Service Pack 4 Windows XP (Including Service Pack 1 and Service Pack 2) Computer Model The above OS should be pre-installed on computers with built-in USB ports.
IMPORTANT You must install the software and driver bundled on the supplied Canon Digital Camera Solution Disk onto your computer before connecting the camera to the computer. z The camera will not operate correctly if you connect it to your computer before installing the driver and software. If this happens, please refer to the Troubleshooting section of the Software Starter Guide. z Even when system requirements are met, not all computer functions can be guaranteed.
z Treat the connector area with great care while you attach and remove the interface cable. USB Port Interface Cable Interface Cable Terminal Cover z Always grasp the connector's sides to remove the interface cable from the camera's DIGITAL terminal. z The camera's LCD monitor (or viewfinder) will blank out when the connection to the computer is complete and the power/mode indicator will light yellow.
The following window will display. Using the software and computer to download images: DSee the Software Starter Guide. Using the Camera to Download Images (Direct Transfer Function): DSee Downloading Images by Direct Transfer (p. 137). 9 Macintosh Install the driver and bundled software applications from the Canon Digital Camera Solution Disk (only the first time). Please see the Software Starter Guide for the installation procedures. 2 Set the auto start settings for ImageBrowser.
3. Select [CameraWindow] in the program selection window. [CameraWindow] is generally installed into the folder opened by selecting the [Applications], [Canon Utilities] and [CameraWindow] folders. 4. Click [OK] and then close Image Capture. ImageBrowser Auto Start Settings - OS X (v10.1) 1. Start Image Capture and select [Other] from the [Hot Plug Action] list box. 2. Select [CameraWindow] in the program selection window.
Downloading Images by Direct Transfer Use this method to download images using camera operations. Install the supplied software and adjust the computer settings before using this method for the first time (p. 133). Transfers and saves all images to the computer. New Images Transfers and saves to the computer only the images that have not been previously transferred. DPOF Trans. Images Transfers and saves to the computer only the images with DPOF Transfer Order settings (p. 137).
Select & Transfer/Wallpaper 2 Use the S or T button to select button (or the SET button). 3 Use the W or X button to select images to download and press the button (or the SET button). or , and press the z The images will download. The button will blink blue while downloading is in progress. z Images can also be selected during index playback (p. 44). 4 Press the MENU button. The Direct Transfer menu will reappear. Only JPEG images can be downloaded as wallpaper for the computer.
1 Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal. (See steps 2 on p. 133.) 2 Follow the onscreen instructions to proceed with downloading. Downloading from a Memory Card 1 Eject the memory card from the camera and insert it into an memory card reader connected to the computer. Refer to your card adapter's or card reader's manual for information regarding the connection between the computer and card adapter or card reader.
2 Connect the Stereo/Video Cable to the camera's A/V OUT terminal. z With your fingernail on the left edge of the camera's DIGITAL terminal cover, pull it forward to open it, and plug the Stereo/Video Cable in all the way. z Treat the connector area with great care when plugging and unplugging the cable. 3 Plug the other ends of the Stereo/Video Cable into the VIDEO IN and AUDIO IN jacks on the TV.
About Printing Images shot with this camera can be printed using one of the following methods. z Connecting the camera to a direct print compatible printer*1 with a single cable and pressing the button on the camera. z You can specify the images on your memory card you want to print and how many copies you want (DPOF*2 Print Settings), and then take the memory card to a participating photo lab that supports DPOF to have them printed out later.
Direct Print Compatible Printing DFor details, see the Direct Print User Guide or the operating manual for your printer. Direct Print Compatible Printer Compact Photo Printer (SELPHY CP series) Memory card Card Photo Printer Photo Lab Bubble Jet Printers (PIXMA series/ SELPHY DS series) Print Print settings (DPOF Print Settings) (p. 143) Image Transmission Settings (DPOF Transfer Order) (p.
Setting the DPOF Print Settings You can select images on an memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. See the Direct Print User Guide for instructions on how to print. z is displayed with memory card images that have had print settings set by other DPOF-compliant cameras.
3 Select images for printing. Single Images Number of print copies z When the print type (p. 145) is set to [Standard] or [Both], select an image with the W or X button. Press the SET button, specify the number of copies to print with S or T, and press SET again. (Up to 99 copies can be specified). - When you press the JUMP button, the Jump Bar is displayed to help with searching (p. 46). Press the SET button after the MENU button to select and deselect, and to remove the Jump Bar.
Images are printed in order from oldest to newest by the shooting date. A maximum of 998 images can be selected per memory card. When [Both] is selected, the number of print copies can be set, but it applies to Standard prints only. The [Index] setting only produces one print copy. Print settings can also be assigned to images with the supplied software programs (ZoomBrowser EX or ImageBrowser) on a computer. Setting the Print Style Set the print style after selecting the image to print.
3 Use the S or T button to select [Print Type], [Date] or [File No.] and select settings with the W or X button. Print Type z Select [Standard], [Index] or [Both]. Date z Select [On] or [Off]. File No. z Select [On] or [Off]. 4 Press the MENU button. The Setup menu closes and the Print Order menu reappears. z When [Print Type] is set to [Index], the [Date] and [File No.] cannot be set to [On] at the same time.
Selecting Images for Transferring There are two ways to select images. z Singly z All images on a memory card 1 In the [ (Play)] menu, select [Transfer Order] and press the SET button. See Selecting Menus and Settings (p. 73). 2 Use the W or X button to select [Order] and press the SET button. All transfer settings for the image are canceled when you select [Reset]. Select images for transferring.
All images on a memory card z Select [Mark All] as in Step 2, and press the SET button. To select all images, select [OK] with the W or X button, and press the SET button. z To cancel all print selections, select [Reset]. 4 Press the MENU button. The selection mode will turn off and the Transfer Order menu will reappear. 148 Images are transferred in order from oldest to newest by the shooting date. A maximum of 998 images can be selected per memory card.
Appendix List of Messages The following messages may appear on the LCD monitor (or viewfinder) during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... Image is being recorded to, or read from, memory card. Playback mode is starting. Resetting all the camera and menu settings to default. No memory card You attempted to shoot or play back images without an memory card installed.
Appendix Corrupted Data. You attempted to play back an image with corrupted data. RAW You attempted to play back a RAW image. Unidentified Image You attempted to play back an image that was recorded in a special data type (proprietary data type used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera. Cannot magnify! You attempted to magnify an image recorded in a different camera or data type, an image edited with a computer, or a movie.
Troubleshooting Camera will not operate Power is not turned on. z Turn on the camera. See Turning the Power On/Off (p. 23) Memory card slot cover or battery cover opened. z Confirm that the memory card slot and battery cover are securely Batteries are loaded in the wrong direction. z Put batteries back into the charger in the correct direction. Insufficient battery voltage. z Replace with four new AA-size alkaline batteries, or fully charged Batteries are not the right type.
Cannot play back You attempted to play back images shot with another camera or images edited with a computer. z Computer images that cannot otherwise be played back might play File name was changed with a computer or file location was changed. z Set the file name or file number according to the Design rule for back if they are sent to the camera using the bundled ZoomBrowser EX or ImageBrowser software. See ZoomBrowser EX/ImageBrowser Software User Guide (PDF). Camera File system standards.
If using rechargeable batteries: Batteries do not charge in separately sold battery charger. Batteries were placed in the charger in the wrong direction. z Put batteries back into the charger in the correct direction. Poor electrical contact. z Be sure to set batteries firmly into the charger. z Be sure that the power cord is firmly connected to the charger, and is firmly plugged in to the power outlet. Battery terminals are dirty. z Wipe them well with a dry cloth before charging.
Subject in recorded image is too dark. Insufficient light for shooting. z Raise the built-in flash so that it can fire. Subject is dark in contrast to the background. z Set the exposure compensation to a positive (+) setting. z Use the AE lock or spot metering function. See Locking the Exposure Setting (AE Lock) (p. 103) See Switching between Metering Modes (p. 89) Subject is too far away for flash to reach. z To use the built-in flash, shoot within the following ranges: Auto ISO: 0.7 to 5.2 m (2.
Noise displays on the LCD monitor. Subject's movements on LCD monitor are irregular. Camera automatically lightened the image displayed on the LCD monitor to make it easier to see when shooting in a dark area. z There is no effect on the recorded image. See Night Display (p. 28) White dots appear on the image. Light from the flash has reflected off dust particles or insects in the air.
Using Conversion Lenses (Sold Separately) Conversion Lens Adapter LA-DC58E and Lens Hood LH-DC40 are included in the separately sold Lens Adapter/Hood Kit LAH-DC20. The camera supports use of the separately sold Wide Converter WCDC58A, Tele-converter TC-DC58B and close-up lens 500D (58cm). In order to attach any of these lenses, you also need to use the separately sold Conversion Lens Adapter LA-DC58E (included with LAH-DC20).
Attaching a Lens/Lens Hood 1 Be sure that the camera is turned off. Press the ring release button and hold it down, turn the ring in the direction of the arrow and remove it. Ring Ring Release Button 2 Align the z marks on the conversion lens adapter and the z mark on the camera, and turn the adapter in the direction of the arrows as far as the S mark on the camera. Conversion Lens Adapter LA-DC58E when attached.
z You should not shoot images in (Stitch Assist) mode when using these attachments. Although it is possible to select this mode on the camera, the PhotoStitch software will not be able to stitch the images together on the computer. z To protect the conversion lens, hold the camera's lens with one hand and screw the conversion lens onto the camera with the other hand. z Completely remove all dust and dirt from conversion lenses with a lens blower brush before use.
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation.
z Leaving it in the flash could lead to the battery leaking and damaging the flash. Remove the battery from the flash and store it in a dry and cool location if you will not use it for extended periods. z Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both. Before affixing the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed.
Continued on next page 161 10 Appendix z The charge indicator blinks while charging, then remains lit when charging is finished. z This charger can be used only to charge Canon AA-size NiMH batteries NB-2AH. Please do not attempt to charge NB-2AH batteries in any other type of charger. z Never mix new batteries together with batteries that have been used in other devices. z When recharging batteries from the camera, always recharge all four of them at the same time.
z Since storing fully charged batteries for long periods of time (about 1 year) can shorten their lifecycle or affect performance, you are recommended to use the batteries in the camera until they are completely discharged and to store them at normal temperature (23 °C/73 °F) or less. If you do not use the batteries for long periods of time, charge them fully and discharge them fully in the camera about once a year before returning them to storage.
Compact Power Adapter (Sold Separately) You should use the separately sold Compact Power Adapter CAPS700 when using the camera for long periods of continuous use or for connecting to a computer or printer. 1 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. To power outlet Plug in the power cord firmly as far as it will go. 2 Open the terminal cover and connect the DC plug of the compact power adapter to the camera's DC IN terminal.
Replacing the Date Battery If the Set Date/Time menu appears when you turn on the camera power, the date battery charge is low and the date and time settings have been lost. Please replace the battery with a commercially available lithium coin battery (CR1220) with the following procedures. Please note that the first date battery may appear to expire relatively quickly after you purchase the camera. This is because it is installed in the camera at the point of manufacture, not when you make the purchase.
Camera Care and Maintenance If the camera, lenses, viewfinder or LCD monitor become dirty, use the following cleaning methods. Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body : Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens : First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth.
Appendix Specifications All data is based on Canon's standard testing methods. Subject to change without notice. PowerShot S2 IS Camera Effective Pixels : Approx. 5.0 million Image Sensor : 1/2.5 -inch CCD (Total number of pixels: Approx 5.3 million) Lens : 6.0 (W) - 72.0 (T) mm (35 mm film equivalent: 36 - 432 mm) f/2.7 (W) - f/3.5 (T) Digital Zoom : Approx. 4.0x (Up to approx.
Flash Range : 0.7 - 5.2 m (2.3 - 17.1 ft.) (W), 0.7 - 4 m (2.3 - 13.1 ft.) (T) (When ISO speed is set to Auto.) Flash Exposure Compensation : ± 2.0 stops in 1/3-stop increments, FE lock, Slow synchro and 1stcurtain/2nd-curtain flash are available. Flash Output* : 3 stops Shooting Modes : Auto Creative zone: Program, Shutter-speed priority, Aperture priority, Manual, Custom Image zone: Portrait, Landscape, Night scene, Special Scene,* My Colors, Stitch Assist, Movie Continuous shooting : Approx. 1.
Playback Modes : Single (histogram displayable), Index (9 thumbnail images) Magnified (approx. 10x max. in LCD monitor/viewfinder, forward or reverse selection through magnified images possible), Image search (Jumps over 10 or 100 images, to a movie, or to the next shooting date, or nine images at a time during Index playback) Slide Show Sound memos (recording/playback up to 60 sec.
Battery Performance Number of Images Shot LCD Monitor ON(Based on the CIPA standard) Viewfinder on Playback Time AA Alkaline Batteries (included with the camera) Approx. 130 images Approx. 130 images Approx. 800 min. AA NiMH Battery (NB4-200) (full charge) Approx. 550 images Approx. 570 images Approx. 900 min. z The actual figures will vary according to the shooting conditions and settings. z Movie data is excluded.
Memory Cards and Estimated Capacities (Recordable Images) Still images : Card included with the camera L 2592 x 1944 pixels M1 2048 x 1536 pixels M2 1600 x 1200 pixels S 640 x 480 pixels SDC-16M SDC-128M SDC-512MSH 5 49 190 9 87 339 19 173 671 8 76 295 15 136 529 30 269 1041 13 121 471 24 217 839 46 411 1590 52 460 1777 80 711 2747 127 1118 4317 Movie : Card included with the camera SDC-16M SDC-128M SDC-512MSH 640 x 480 pixels 30 frames/sec. 6 sec. 1 min.
Image File Sizes (Estimated) Still images Compression Resolution L 2592 x 1944 pixels 2503 KB 1395 KB 695 KB M1 2048 x 1536 pixels 1602 KB 893 KB 445 KB M2 1600 x 1200 pixels 1002 KB 558 KB 278 KB S 640 x 480 pixels 249 KB 150 KB 84 KB Movie Resolution Frame Rate 30 frames/sec. 15 frames/sec. 640 x 480 pixels 1980 KB/sec. 990 KB/sec. 320 x 240 pixels 660 KB/sec. 330 KB/sec. 10 : Compatible with SD memory card standards Dimensions : 32.0 x 24.0 x 2.1 mm (1.3 x 0.9 x 0.1 in.
Battery Charger CB-4AH/CB-4AHE (Included with the separately sold battery charger Kit CBK4-200) Rated Input : 100 - 240 V AC (50/ 60 Hz) 16VA - 21VA Rated Output : 565 mA*1, 1275 mA*2 Charging Time : Approx. 250 min., Approx. 110 min. Operating Temperatures : 0 - 35 °C (32 - 95 °F) Dimensions : 65.0 x 105.0 x 27.5 mm (2.6 x 4.1 x 1.1 in.) Weight : Approx. 95 g (3.4 oz.) *1 When using 4 NiMH NB-2AH batteries. *2 When using 2 NiMH NB-2AH batteries, one at each end of the charger.
NiMH Battery NB-2AH (Included with the separately sold NiMH NB4-200 or the Battery/Charger Kit CBK4-200) Type : Rechargeable nickel metal hydride battery Nominal Voltage : 1.2 V DC Typical Capacity : 2300 mAh (Lowest: 2150 mAh) Cycle Life : Approx. 300 times Operating Temperatures : 0 - 35 °C (32 - 95 °F) Dimensions : Diameter: 14.5 mm (0.6 in. ) Length: 50 mm (2.0 in.) Weight : Approx. 29 g (1.0 oz.
Photo Tips and Information Panning Shooting Method (p. 35) To shoot a fast-moving subject, aim the camera while it is still some distance away, and press the shutter button while moving the camera to track the subject and compose the picture. z Track the subject by moving your upper body with the camera, standing with legs apart and turning at the hips while keeping your arms in close to your body. z Move the camera to track the subject's motion while pressing the shutter button.
Tip for Using the Self-timer (p. 59) Normally, the camera shakes a little when you press the shutter button. Setting the self-timer to delays the shutter release for 2 seconds and allows the camera to stop shaking, thus preventing a blurred image. Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot. Exposure Compensation (p. 90) This camera automatically adjusts the exposure to shoot images with the optimal brightness.
ISO Speed (p. 93) The ISO speed is the numeric representation of the camera's sensitivity to light. The higher the ISO speed, the169 higher the sensitivity. A high ISO speed allows you to shoot images in dark indoor or outdoor conditions without a flash and also helps prevent blurred images due to camera shake. This is convenient when shooting images in places where flash photography is prohibited.
Appendix Index A D Adjusting the Exposure . . . . . . . 90 AE Lock . . . . . . . . . . . . . . . . . 103 AEB mode . . . . . . . . . . . . . . . . 101 AF Lock . . . . . . . . . . . . . . . . . . 110 AF Mode . . . . . . . . . . . . . .77, 112 AF-assist Beam . . . . . . . . . . . . 35 Aperture value . . . . . . . . . . . . . 84 Aperture-priority AE . . . . . . . . . 15 Audio . . . . . . . . . . . . . . . . . . . . . 68 Auto . . . . . . . . . . . . . . . . . . . . . 33 Auto Power Down . . . . . . .
Function Available . . . . . . . . . . . . 184 Button . . . . . . . . . . . . . . . 14 Item . . . . . . . . . . . . . . . . . 73 H Histogram . . . . . . . . . . . . . . 27, 32 I Image File Sizes (Estimated) . 171 Image Stabilizer Function . . . . . 35 Image Zone . . . . . . . . . . . . . . . 49 Index Playback . . . . . . . . . . . . . 44 Indicators . . . . . . . . . . . . . . . . . 15 Information View . . . . . . . . . . . 27 Intervalometer . . . . . . . . . 78, 107 IS . . . . . . . . . . . . . . . . . .
Press Shutter Button Fully . . . . . . . . . . . . . . . . . 34 Halfway . . . . . . . . . . . . . . 34 Printing . . . . . . . . . . . . . . . . . . 141 DPOF Print Settings . . . . 143 Order . . . . . . . . . . . . . . . 143 Print/Share . . . . . . . . . . . . . . . . 14 Program AE . . . . . . . . . . . . . . . 85 Protect . . . . . . . . . . . . . . .78, 121 R S Sampling rate . . . . . . . . . . . . . . 68 Save Settings . . . . . . . . . . . . . . 78 Saving Custom Settings . . . . .
T Tally Lamp . . . . . . . . . . . . . 12, 77 Tele-converter . . . . . . . . . . . . 156 Telephoto . . . . . . . . . . . . . . 14, 33 Terminal Cover . . . . . . . . . . . . . 14 Transfer Order . . . . . . . . . . . . 147 Turning the Power On/Off . . . . 23 V Video System . . . . . . . . . . . . . . 80 Viewfinder . . . . . . . . . . . . . 14, 28 Viewing Images on a TV Set . 139 Volume . . . . . . . . . . . . . . . . . . . 79 W White Balance . . . . . . . . . . . . . 91 Wide Angle . . . . . . . . . . . . .
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
FCC Notice (Digital Camera, Model PC1130) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
MEMO 183
Appendix Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode. You can shoot with the settings saved in the mode. (p. 113) L {* Large Resolution Medium 1 M1 { (Still images) M2 { Medium 2 p. 38 S { Small { Superfine Compression Fine {* p. 38 { Normal 640 x 480 pixels {* 30 frames/sec. 640 x 480 pixels { Resolution 15 frames/sec. (Movies) 320 x 240 pixels { 30 frames/sec. 320 x 240 pixels { 15 frames/sec. {* Auto Flash – On p.
MF-Point Zoom AF-assist Beam Macro p. 56, 57 Macro Super Macro Digital Zoom p. 61 – { { { {(1) { – – { { { { { { { { {(1) { U { { { { { (1) { { – { { { { – { { { { – – – – – { – { { { { { On { { { { { – – {* { { { { Off {* {* {* {* {* { U { {* {* {* {* – – Safety Shift p. 87 – Exposure Compensation p. 90 { Evaluative Center-Weighted – Average Metering Average Metering Method – p. 89 Spot – Center – AF Point – AE Lock/FE Lock p.
