ENGLISH DIGITAL CAMERA Camera User Guide Camera User Guide • Please start by reading the Precautions on page 4 of this manual. • Please refer to the Software Starter Guide for information on installing the software and downloading images. • Please also read the printer user guide included with your Canon printer. CDI-E090-010 XXXXXXX © 2003 CANON INC.
Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software This Guide Connecting the Camera to a Computer Software Starter Guide Downloading Images to a Computer Reference Page AF Frame Auto ●* ●* ●* ●* ●* ●* ●* ●* – Center Point ● ● ● ● ● – – ●* ●* ●* ●* Manual (1) (1) ● (1) (1) (1) (1) – – – 74 – – – – – – – – ● ● ● ● Manual Focus – ● ● ● ● ● ● ● ● ● ● ● 100 Macro Mode 63 Digital Zoom ●
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
About this Camera User Guide Symbols Used : This mark denotes issues that may affect the camera’s operation. : This mark denotes additional topics that complement the basic operating procedures. Question? Look Here First. 3 How do I navigate the menus? Selecting Menus and Settings (p. 36) 3 What settings are available under each function? and Will my settings remain in effect even after I’ve turned the camera off? Functions Available in Each Shooting Mode (p.
About the Thumb Index A quick introduction intended for new users who want to shoot first and learn more later. Tells you how to get the camera running and how to begin shooting and playing back images. Introduces you to all of the camera components, and explains how to load batteries and use the shutter button, among other basic functions. Also explains how to set the camera’s start-up image, start-up sound and shutter sound.
Table of Contents : Functions and operations tables. These pages are shaded on the right edges to make them easy to find. Read This First ............................................................................. 4 Quick Start .................................................................................. 8 Components Guide ................................................................... 10 Front View ...................................................................................
Fast Shutter ......................................................................... 57 Slow Shutter ........................................................................ 58 Stitch Assist Mode ................................................................ 59 Movie Mode ........................................................................ 62 Macro Mode ........................................................................ 63 Self-Timer .............................................................
Automated Playback (Slide Show) ................................................ 114 Protecting Images ....................................................................... 118 Erasing .................................................................................... 119 Erasing Images Individually .......................................................... 119 Erasing All Images ...................................................................... 120 Formatting a CF Card .............................
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Warnings • Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight. • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. • Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury.
• Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire. • Do not cut, damage, alter or place heavy items on the power adapter cord.
• Always keep the terminals of the battery charger clean. Do not place metal objects on top of the terminals. There is a risk of fire and other hazards. Cautions • Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries.
Quick Start 1 Charge the Battery (p. 15). Charge the battery using the supplied battery charger. The charging is complete when the charge indicator turns from red to green. • Please note that the battery charger shape varies between regions. Charge indicator 2 Install the Battery (p. 17). Open the CF card slot/battery cover. Hold back the battery lock in the direction of the arrow using the corner of the battery pack, then insert the battery pack into the compartment until it is locked.
6 Focus (p. 33). 7 Shoot (p. 33). 8 View the recorded image (p. 47). Quick Start Aim the camera and lightly press the shutter button halfway. Two beeps will sound when the autofocus is set. Press the shutter button all the way. You will hear the sound of the shutter close when the shot is complete. The recorded image appears in the LCD monitor for approximately 2 seconds.
Components Guide Front View Zoom Lever Shooting: (Telephoto)/ (Wide Angle) p. 35 Replaying: (Zoom in)/ (Zoom out) p. 106 Shutter button (p. 33) Optical Viewfinder Window (p. 32) Shooting Mode Dial (p. 13) AF-assist Beam (p. 34) Red-Eye Reduction Lamp (p. 54) Self-Timer Lamp (p. 64) Microphone (p. 113) Flash (p. 54) Speaker (Audio/Video Out) Terminal (p. 144) Lens Cover (p. 24) Lens Terminal Cover Terminal* (p.
Back / Bottom View Preparing the Camera, Basic Functions Strap Mount Viewfinder (p. 32) Attaching the Wrist Strap* DC Coupler Cable Cover (p. 162) CF Card Slot/Battery Cover (p. 17, 19) Tripod Socket * Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The LCD monitor is covered with a thin plastic film for protection against scratches during shipment. Remove it before using the camera.
Controls (Exposure) / (White Balance) / (Function) Button (p. 36, 79, 80) Power/Mode Indicator (p. 24) Power/Replay Lever (p. 24, 26) (Flash) / (Index) Button (p. 54, 107) (Macro) / (Jump) Button (p. 63, 108) (Light Metering) / (Microphone) Button (p. 77, 90, 92, 113) (Manual Focus) / (Single image erase) Button (p. 98, 100, 119) Multicontroller (p. 14, 74) (Menu) Button (p. 37) (Display) Button (p. 28) LCD Monitor (p.
Shooting Mode Dial • : Auto (p. 45) The camera automatically selects settings. • Image Zone The camera automatically selects settings according to the image composition type. : Portrait (p. 56) : Landscape (p. 56) : Night Scene (p. 57) : Fast Shutter Speed (p. 57) : Slow Shutter Speed (p. 58) : Stitch Assist (p. 59) : Movie (p. 62) • Creative Zone The user selects exposure, aperture or other settings to achieve special effects. : Program AE (p. 67) : Shutter Speed-Priority AE (p.
Operating the Multicontroller The multicontroller is used to select choices, images and menus on the LCD monitor and confirm the selection. Moving the cursor on the LCD monitor up and down. Use C or D to select a menu item on the LCD monitor. Moving the cursor on the LCD monitor left and right. Use B or A to select a menu item on the LCD monitor. Confirming a menu selection or moving the AF frame. Press or .
Preparing the Camera Charging the Battery Pack 1 Align the edge of the battery pack with the line on the battery charger, then slide the battery in the direction of the arrow. 2 Battery charger model names and types vary by region. (For CB-2LT) Plug the battery charger into a power outlet. CB-2LT Charge Indicator (For CB-2LTE) Attach the power cord to the battery charger and plug it into a power outlet. (For CB-2LT and CB-2LTE) • The charge indicator will light red while the battery pack is charging.
Charging the Battery Pack (continued) Battery Pack Handling Precautions • Keep the battery pack and camera terminals ( ) clean at all times. Dirty terminals may cause a poor contact between the battery pack and camera. Polish the terminals with a tissue or a dry cloth before charging or using the battery pack. • Do not cover the battery charger with anything, such as a tablecloth, cushion or blanket, when it is charging. Heat will build up internally and possibly lead to fire.
Installing the Battery Pack 1 Turn off the camera (p. 24). Check that the power/mode indicator is not lit. 2 2 Slide the CF card slot/battery cover in the direction of the arrow to open the cover. 1 3 Hold back the battery lock in the direction of the arrow with the corner of the battery pack, then insert the battery pack into the compartment until it is locked. Battery lock 4 To remove the battery pack, release the battery lock.
Installing the Battery Pack (continued) Battery Low Status The following icon and/or message appears when the battery becomes low. Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period. When the LCD monitor is off, this icon will display when you press the , , , , or button. Change the battery pack Battery charge is insufficient to operate the camera. Replace the battery pack immediately.
Installing a CF Card 1 Turn off the camera (p. 24). 2 2 Slide the CF card slot/battery cover in the direction of the arrow to open the cover. 1 3 Insert the CF card with the label facing out and the arrow pointing in. • Push the card in until the CF card eject button fully extends. • To remove the CF card, push the CF card eject button and pull the card out.
Installing a CF Card (continued) CF Card Handling Precautions • CF cards are high-precision electronic devices. Do not bend, force, or subject them to shocks or vibration. • Do not attempt to disassemble or alter a CF card. • Moving a CF card rapidly between temperature extremes may cause condensation to form in the card, leading to potential malfunctions.
Setting the Date / Time The Set Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium battery charge is low. Start from Step 5 to set the date and time. The [ (Rec.)] or [ Preparing the Camera, Basic Functions 1 Turn on the camera (p. 24). 2 Press the button. (Replay)] menu appears. (Rec.) Menu. Select the [ (Set up)] menu using A on 3 the multicontroller. Pressing the menus.
Setting the Date / Time (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • You may need to reset the date and time if the battery pack is removed for about three weeks. • The Date/Time cannot be inserted in the actual image even if the Date/Time have been set. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Charging the Date/Time Battery • The camera has a built-in rechargeable lithium battery that maintains the date, time and other camera settings.
Setting the Language 1 Turn on the camera (p. 24). 2 Press the button. (Rec.) or (Replay) menu appears. Preparing the Camera, Basic Functions The (Rec.) Menu. Select the [ (Set up)] menu using A on 3 the multicontroller. Pressing the menus. button also switches between [Language] using C or D on the 4 Select multicontroller and press . Select a language using B, A, C or D on 5 the multicontroller. 6 Press . After adjusting the settings, press the window.
Basic Functions Turning the Power On / Off The power/mode indicator remains lit while the power of the camera is on. The power/mode indicator indicates the state of the camera as follows. Orange: Shooting mode Green: Replaying mode/Printer connection mode* Yellow: Computer connection mode* Off: The power of the camera is off. Power/Mode Indicator * For printer connection mode, see Connecting the Camera to a Printer (p. 126).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • You will hear a start-up sound and see the start-up image when the power comes on. (To change the startup sound and image, see below and pages 40 and 156.) • The start-up image does not appear when the LCD monitor is off or the terminal is connected to a TV. Turning on the camera without the start-up sound and image Press and hold the button, then turn on the power. The camera is equipped with a power-saving function.
Switching between Shooting and Replaying You can quickly switch between Shooting mode and Replaying mode. This is convenient when you wish to shoot again after checking or deleting an image immediately after it is shot. 2 Shooting Mode 1 Slide the power/replay lever to the right (p. 24). • The camera switches to Replaying mode. In this case, the lens does not retract. • To return to Shooting mode, slide the power/replay lever to the right again or press the shutter button halfway.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Relationship of the Three States (Power Off/Shooting Mode/Replaying Mode) of the Camera Power Off Shooting Mode Preparing the Camera, Basic Functions Replaying Mode Replaying Mode : Sliding the Power/Replay lever to the right : Opening/Closing the lens cover : Pressing the shutter button halfway 27
Using the LCD Monitor The LCD monitor can be used to confirm an image during shooting, to replay recorded images or to adjust menu settings. Pressing the button switches the LCD monitor display mode. 2 Shooting Mode Pressing the button cycles the LCD monitor to the next mode each time the button is pressed. On (No Information) ➝ On (Information View) ➝ Off ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • The on/off setting of the LCD monitor display mode is memorized when the camera is turned off.
Information Displayed on the LCD Monitor The LCD monitor displays information in Shooting or Replaying mode, such as the camera settings, remaining image capacity and shooting date / time. 2 Shooting Mode The following displays in information view. ••• Exposure Compensation White Balance (WB) Aperture Recordable Value Images or Shutter Speed Recordable Movie Time Spot AE Point (sec.) Frame L M1 M2 S 3.8x 4.9x 6.1x 7.6x 9.3x 12x AF Frame (Red) p. 79 p.
Using the LCD Monitor (continued) 2 Replaying Mode File Number In simple display mode, the following information appears. L M1 M2 S Image Number Shooting Date / Time and Total (Display Image/ Total) p. 49 p. 49 p. 52 p. 113 p. 109 p. 118 In detailed display mode, the following information also appears.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ About the Histogram The histogram is a graph that allows you to judge the brightness of the recorded image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward to the right, the brighter the image. If the image is dark, adjust the exposure compensation to a positive number. Similarly, adjust the exposure compensation to a negative number if the image is bright (p. 79).
Using the Viewfinder to Shoot Setting the LCD monitor to Off (p.28) and using the optical viewfinder can help conserve power while shooting. • The viewfinder has a field of vision of approximately 82% of the actual shooting image. Shows the center of the image ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Image Seen in Viewfinder vs. Recorded Image Please note that the actual image may differ from the image seen in the optical viewfinder due to the physical separation between the viewfinder and lens.
Pressing the Shutter Button The shutter button features a two-stage action. Indicators Pressing halfway automatically sets the exposure, focus and white balance. • The indicators light or blink as follows.
Pressing the Shutter Button (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • If the orange or yellow indicator blinks while you press halfway, you can still press fully to take the shot. • Images are first saved into the camera’s internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. • The beep and shutter sound can be set On / Off in the Set up menu (p. 151).
Using the Zoom (Focal Length) The zoom can be adjusted from 35 to 105 mm (equivalent to 35 mm film format). Telephoto / Wide Angle to zoom in to zoom out Preparing the Camera, Basic Functions • Slide the zoom lever toward (telephoto). • Slide the zoom lever toward (wide angle). Digital Zoom An image already zoomed with the optical zoom lens can be further zoomed up digitally to an approximate factor of 12 for shooting (p. 65).
Selecting Menus and Settings Menus are used to adjust shooting, replaying, date / time and electronic sound / settings. Menus can be displayed by either pressing the / button or the button. Watch the LCD monitor while performing the following procedures. Selecting Settings by Pressing the 1 Press the / / Button (Only in Shooting Mode) button. • Icons of the selectable settings appear on the left side of the LCD monitor. • The current settings icons appear.
Selecting Settings by Pressing the 1 Press the Button button. In Shooting mode, the [ (Replay)] menu appears. (Rec.)] menu appears. In Replaying mode, the [ Preparing the Camera, Basic Functions between menu tabs using B or A 2 Switch on the multicontroller. • The menu switches as follows: [ (Rec.)] or [ (Replay)] [ (Set up)] [ (My Camera)] • Pressing the button or the zoom lever also switches between the menu tabs. Select a menu item using C or D on the 3 multicontroller.
Selecting Menus and Settings (continued) Menu Settings and Factory Defaults This chart shows the options for each menu and the default settings.
Beep 151 */ 151 Auto Power Down On* / Off 151 Date/Time Sets the date and time 21 Format Formats the CF card 121 Shutter Volume Off / 1 / 2* / 3 / 4 / 5 152 Playback Vol. Off / 1 / 2* / 3 / 4 / 5 152 Start-up Vol. Off / 1 / 2* / 3 / 4 / 5 152 Operation Vol. Off / 1 / 2* / 3 / 4 / 5 153 Selftimer Vol. Off / 1 / 2* / 3 / 4 / 5 153 File No.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, shutter, operation and self-timer sounds. Each menu item has three choices. e.g. Start-up image [ 1 ] [ ] [ ] As default settings, My Camera setting [ ] has a science fiction theme and My Camera setting [ ] has an animal theme. Changing My Camera Settings 1 Turn on the camera (p. 24). 2 Press the button. The [ (Rec.)] or [ (Replay)] menu appears.
6 Press the button. • Pressing the button closes the menu and makes the settings take effect. • In Shooting mode, the menu can be closed by pressing the shutter button halfway. (In Replaying mode, the menu closes when the shutter button is pressed halfway and the camera switches to Shooting mode if the lens cover is open.) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • If you select [Theme] in Step 4, you can select a consistent theme for each of the My Camera Settings.
Registering My Camera Settings Images recorded onto the CF card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. The following menu items can be saved to the camera. • Start-up Image • Start-up Sound • Operation Sound • Selftimer Sound • Shutter Sound Registering CF Card Images and Sounds 1 Turn on the camera (p. 24). 2 Slide the power/replay lever.
Select or using B or A on the 6 multicontroller. appears. button. Preparing the Camera, Basic Functions 7 Press the An image appears. [Start-up Image] → Step 8a, 9a [Start-up Sound], [Shutter Sound], [Selftimer Sound] → Step 8b, 9b the image you wish to 8a Select register using B or A or on the multicontroller. 9a Press . Select (Record) using B or A on 8b the multicontroller and press . • Recording starts. • Recording stops when the set amount of time has passed.
Registering My Camera Settings (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Sounds recorded with the movie (p.62) and sound annotation (p.113) functions cannot be added as My Camera settings. • When you register new My Camera settings, the previously registered settings are erased. File Format of My Camera Settings My Camera settings should conform to the below file formats. However, CF card images shot with this camera can be registered as My Camera settings regardless of the below formats.
Shooting - Letting the Camera Select Settings See Functions Available in Each Shooting Mode (p. 180) at the end of this manual to find out which settings can be changed in which Shooting modes. Auto Mode 1 Check that the camera is in Shooting mode (p. 24). Turn the shooting mode dial to 2 . 3 Aim the camera at the subject. the zoom lever to achieve the desired composition 4 Use (relative subject size in the viewfinder). 5 Press the shutter button halfway (p. 33).
Auto Mode (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Functions Available in Each Shooting Mode (p. 180) • You can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 48).
Reviewing an Image Right after Shooting Reviewing the Image After a photo is taken, the image displays on the LCD monitor for two seconds. (To change this setting, see page 48.) There are two ways to display the image for longer. 2Pressing while the image is displayed If you press while the image is displayed on the LCD monitor, it will continue to display even after the shutter button is released. Press the shutter button halfway again to stop displaying it and shoot an image.
Reviewing an Image Right after Shooting (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The above operations cannot be performed if the image was shot with the digital zoom or when is already selected as the recording format. Changing the Image Display Duration The length of time images are displayed after a photo has been taken can be changed anywhere from 2 seconds to 10 seconds or turned off. 1 In the [ (Rec.)] menu, select [Review]. See Selecting Menus and Settings (p. 36).
Changing the Resolution and Compression You can change the resolution and compression (excluding movies) settings to suit the purpose of the image you are about to shoot. To record the CCD output without compression, select the RAW file format (p. 52). Resolution Purpose L (Large) 2592 x 1944 pixels • Print A4 size* 210 x 297 mm (8.3 x 11.7 in.) or larger prints High • Print letter size* 216 x 279 mm (8.5 x 11 in.
Changing the Resolution and Compression (continued) the resolution you wish to set 4 Select using B or A on the multicontroller. Excluding Number of recordable images (Only displayed when the resolution, compression or file format is selected) 5 Press . the compression you wish to set 6 Select using B or A on the multicontroller. You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180) • Size of an image file (approximate) (p.173) • Types of CF cards and resolution (p. 173) • The resolution and compression settings are affected by the Shooting mode mode).
Changing the File Format The recording file format can be switched to the RAW format before shooting the image. With the standard JPEG file format, the camera processes images after capturing them to produce optimal results. The JPEG format compresses images so that more can be stored on a single CF card. However, the compression is irreversible, meaning that the original image data cannot be recovered after processing.
4 Select RAW using B or A on the multicontroller. You can shoot the image right after selecting settings by pressing the shutter button. The previous screen will appear again, once the image is shot. button. Shooting - Letting the Camera Select Settings 5 Press the / / 6 Shoot the image. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Images shot in the JPEG format can also be changed to the RAW format while they are displayed right after shooting (p. 47).
Using the Flash Use the flash according to the guidelines below. Red-eye reduction, Auto The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires Auto The flash fires automatically as required by the lighting level. Red-eye reduction, Flash on The red-eye reduction lamp and the flash always fire. Flash on The flash always fires. Flash off The flash does not fire. Press the button to switch between 1 flash modes.
In the [ 1 [On]. (Rec.)] menu, set [Red-eye] to appears on the LCD monitor. When shooting with the red-eye reduction function, the subjects must look right at the red-eye reduction lamp for this mode to be effective. Try asking them to look directly at the lamp. Even better results can be obtained by shooting with the lens set to a wide angle, increasing the lighting in indoor settings or approaching closer to the subject.
Portrait Mode Use this mode when you want the subject to appear sharp and the background to blur. 1 Turn the shooting mode dial to . Shooting procedures are the Mode same as for the (p. 45). ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Functions Available in Each Shooting Mode (p. 180) • To best achieve the effect of the background gradually fading, compose the image so that the upper half of the subject’s body fills most of the viewfinder or LCD monitor.
Night Scene Mode Use this mode to capture human subjects against the backdrop of an evening sky or night scene. The people are illuminated with light from the flash while the backdrop is captured at a slow shutter speed so that both appear correctly exposed. Turn the shooting mode dial to . Shooting procedures are the same as for the (p. 45). mode ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Always use a tripod to prevent camera shake in this mode.
Slow Shutter Use this mode to shoot moving objects to make them appear blurred such as river rapids. 1 Turn the shooting mode dial to . Shooting procedures are the mode (p. same as for the 45). ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Functions Available in Each Shooting Mode (p. 180) • Always use a tripod to prevent camera shake in this mode.
Stitch Assist Mode Use this mode to shoot a series of overlapping frames for merging (stitching) into a large panoramic image using a computer. Vertical Shooting - Letting the Camera Select Settings Horizontal 2x2 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Please use the bundled PhotoStitch program to merge the images on a computer. Framing a Subject PhotoStitch detects the overlapping portions of adjoining images and merges them.
Stitch Assist Mode (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Compose each frame so that it overlaps 30 to 50% of the adjoining image. Try to keep the vertical misalignment to within 10% of the image height. • Do not include moving items in the overlap. • Do not try to stitch images that include both distant and close subjects. Objects may appear warped or doubled up. • Make the brightness in each image consistent.
and shoot the second image so 4 Compose that it overlaps the first. • Minor discrepancies in the overlap can be corrected with the software. • An image can be retaken. Press B or A on the multicontroller to return to that frame. Shooting - Letting the Camera Select Settings Sequence Sequence 5 Use the same procedures to shoot the remaining frames. A maximum of 26 images can be recorded either horizontally or vertically. 6 Press after the last shot.
Movie Mode Use this mode to shoot movie frames. The resolution can be set to either [ 240 (default setting))] or [ (160 × 120)] (p. 49). 1 Turn the shooting mode dial to (320 × . The LCD monitor turns on and displays the maximum recording time (in seconds). 2 Press the shutter button all the way. • Shooting and sound recording starts simultaneously. • During the shooting a red circle appears in the upper right of the LCD monitor. 3 Press the shutter button all the way to stop recording the movie.
Macro Mode Use the macro mode to shoot close-ups of subjects in the range of 10 to 50 cm (3.9 in. to 1.6 ft.) at wide angle end and 30 to 50 cm (1.0 ft. to 1.6 ft.) at telephoto end. button to turn the LCD monitor on. button. • The icon appears on the LCD monitor. • Press the button again to cancel the macro mode. 3 Shoot the image. • The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway. Mode (p. 45).
Self-Timer You can take pictures with the self-timer in any Shooting mode. 1 Press the / / button. Select * (Drive mode) using C or D on 2 the multicontroller. * The current setting is displayed. Select or using B or A on the 3 multicontroller and press the / / button. When is selected, the shutter release will be delayed for 10 seconds, and when is selected, the shutter release will be delayed for 2 seconds, after you press the shutter button. 4 Shoot the image.
Digital Zoom With the combined optical and digital zoom functions, images can be zoomed as follows. 3.8 times, 4.9 times, 6.1 times, 7.6 times, 9.3 times and 12 times In the [ 3 Zoom]. Shooting - Letting the Camera Select Settings button to turn the LCD monitor on. 1 Press the mode dial to any Shooting mode except for 2 Turnorthe shooting . (Rec.)] menu, select [Digital See Selecting Menus and Settings (p. 36). 4 Select [On] and press the the zoom lever toward 5 Slide it. button.
Continuous Shooting Use this mode to shoot successive frames while the shutter button is fully pressed. Standard Continuous Shooting Use this mode to view the images as you shoot continuously. The High Speed Continuous Shooting Use this mode to shoot continuously with a short shutter interval. You cannot check images while shooting continuously. shutter interval is longer in this mode than in mode. 1 Press the / / button. Select * (Drive mode) using C or D on 2 the multicontroller.
Shooting - Selecting Particular Effects Camera settings such as shutter speed and aperture can be freely changed for shooting. See Functions Available in Each Shooting Mode (p. 180) at the end of this manual to find out which settings can be changed in which Shooting modes. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Please see setting. Mode (p.
Program AE (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Functions Available in Each Shooting Mode (p. 180) • If a correct exposure cannot be obtained, the shutter speed and aperture value show in red on the LCD monitor. Use the following methods to obtain the correct exposure and make them show in white. - Use the flash. - Change the ISO speed setting. - Change the light metering mode. Differences and Similarities between the and Modes.
Setting the Shutter Speed When you set the shutter speed in the shutter speed-priority AE mode, the camera automatically selects an aperture value to match the brightness. Faster shutter speeds allow you to catch an instantaneous image of a moving subject while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas. Turn the shooting mode dial to . The shutter speed appears on the LCD monitor if it is on.
Setting the Shutter Speed (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Functions Available in Each Shooting Mode (p. 180) • Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears in the center of the LCD monitor, secure the camera to a tripod before shooting. • The aperture value and shutter speed change according to the zoom state as follows. Wide Angle Telephoto Aperture Shutter Speed (seconds) F 2.8 - 3.5 to 1/1000 F 4.0 - 8.
Setting the Aperture When you set the aperture in the aperture-priority AE mode, the camera automatically selects a shutter speed to match the brightness. Selecting a lower aperture value (opening the aperture) allows you to fade the background and create a beautiful portrait. A higher aperture value (closing it) brings the entire range from foreground to background into focus. The larger the aperture value, the greater the range of the image brought into clear focus. Turn the shooting mode dial to .
Setting the Aperture (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • If the shutter speed shows in red on the LCD monitor, the image is under exposed (insufficient light) or overexposed (too much light). Adjust the aperture value using B or A on the multicontroller until the shutter speed display turns white. • Some aperture values may not be available with certain zoom positions. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Functions Available in Each Shooting Mode (p.
Manually Setting the Shutter Speed and Aperture You can manually set the shutter speed and aperture to achieve a particular effect. This is convenient for shooting fireworks and other images where it is difficult to set the correct exposure automatically. Turn the shooting mode dial to . The shutter speed and aperture value appears on the LCD monitor if it is on. a shutter speed using B or A on 2 Select the multicontroller. an aperture value using C or D on 3 Select the multicontroller.
Selecting an AF Frame The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following way. When the Shooting Mode dial is set to , , , , or You can set the AF frame to Auto Selection (AiAF) or to center-point. When Auto Selection (AiAF) is selected, the camera automatically selects an AF frame from 9 points to focus according to the shooting conditions. With the digital zoom, the center-point AF-frame is always selected. 1 Press .
When the Shooting Mode dial is set to , , or You can set the focusing frame manually to the desired position (Manual Selection). This is convenient for focusing accurately on your chosen subject to obtain the composition you desire. The AF frame is fixed to center-point when an image is shot using the viewfinder with the LCD monitor off or when using the digital zoom, even if you previously set the AF frame to the position you desire. 1 Press .
Selecting an AF Frame (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180) • Turn the LCD monitor on to set the AF frame to the position you desire before shooting. • The AF frame is locked to center-point when using the digital zoom. • When the Spot AE Point is selected as the light metering mode, you can use the selected AF frame as the Spot AE Point (p. 77).
Switching between Light Metering Modes Evaluative metering is the default light metering mode. This can be switched to another metering mode. Evaluative Light Metering Averages the exposure from the entire image, but places more weight on the subject at the center. Use this mode when the subject is backlit or surrounded by bright light. Center-Weighted Averaging Spot AE Point Center Meters the area within the spot AE point frame at the center of the LCD monitor.
Switching between Light Metering Modes (continued) In the [ 3 Point]. (Rec.)] menu, select [Spot AE See Selecting Menus and Settings (p. 36). the [Center] or [AF Point] option, 4 Select then press the button. When [Spot AE Point] is set to [Center], the spot AE point frame appears at the center of the LCD monitor, and when [Spot AE Point] is set to [AF Point], it appears inside the selected AF frame. e.g. Center Spot AE Point Frame 5 Shoot the image.
Adjusting the Exposure Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background. 1 Press the / / button. Select * (+/- (Exp.)) using C or D on 2 the multicontroller. Shooting - Selecting Particular Effects * The current setting is displayed. a setting using B or A on the 3 Select multicontroller. • The settings can be adjusted in 1/3 steps in the range of -2EV to +2EV.
Setting the White Balance When the white balance mode is set to match the light source, the camera reproduces colors more accurately.
Setting a Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate a subject such as a white piece of paper or cloth, or a photo-quality gray card. You can set two types of settings. 1 Press the / / button. * (Auto) using C or D on the 2 Select multicontroller. Shooting - Selecting Particular Effects * The current setting is displayed. (Custom1) or (Custom2) 3 Select using B or A on the multicontroller.
Setting the White Balance (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180) • To set and use a custom white balance setting, it is advisable to select the Shooting mode and set the exposure compensation and flash exposure compensation to zero (±0). The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).
Changing the Photo Effect Photo Effect Off Records with no effect. Vivid Emphasizes the contrast and color saturation to record in bold color. Neutral Tones down the contrast and color saturation to record neutral hues. Low Sharpening Records subjects with softened outlines. Sepia Records in sepia tones. B/W Records in black and white. Custom Effect You can freely set the contrast, sharpness and color saturation.
Changing the Photo Effect (continued) Contrast • Select from - (Weak), 0 (Neutral) and + (Strong). • This function allows you to adjust the degree of brightness. Sharpness • Select from - (Weak), 0 (Neutral) and + (Strong). • This function allows you to adjust how sharply outlines are defined. Saturation • Select from - (Weak), 0 (Neutral) and + (Strong). • This function allows you to adjust the color depth. • You can shoot the image right after selecting settings by pressing the shutter button.
Changing the ISO Speed Raise the ISO speed when shooting in dark places or when you want to shoot with a faster shutter speed. You can choose from the following speeds: Auto, 50, 100, 200 and 400. 1 Press the / / button. * (ISO Speed) using C or D on 2 Select the multicontroller. Shooting - Selecting Particular Effects * The current setting is displayed. desired setting using B or A 3 onSelectthethemulticontroller. You can shoot the image right after selecting settings by pressing the shutter button.
Auto Exposure Bracketing (AEB Mode) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. You can adjust AEB settings in 1/3EV steps within the range of -2EV to +2EV of the standard exposure setting. AEB settings can be combined with exposure compensation settings (p. 79) to extend the adjustment range. The images are shot in the following order: Standard exposure, underexposure and overexposure. 1 Press the / / button.
Shooting - Selecting Particular Effects 6 Shoot the image. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The AEB mode cannot be used for flash photography. If the flash fires, only one image gets recorded. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p.
Focus Bracketing (Focus-BKT Mode) You can shoot three images while the focus changes automatically when shooting with the manual focus. Three ranges -small, medium or large- can be selected. Images are shot with the focus position changing in the following order: current position, backwards and forward. 1 Press the / / button. * (BKT-Off) using C or D on the 2 Select multicontroller. * The current setting is displayed. Select (Focus-BKT) using B or A on 3 the multicontroller and press .
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The Focus-BKT mode is not available when shooting with the flash on. The camera will revert to shooting only one image when the flash is on. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Shooting - Selecting Particular Effects Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p.
Locking the Exposure Setting (AE Lock) You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. button to turn on the LCD monitor. 1 Press the the AF frame or the spot metering frame on the subject 2 Focus on which you wish to lock the exposure setting and press the shutter button halfway. • Selecting an AF frame (p. 74) • Switching Between Light Metering Modes (p.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The AE lock function cannot be used when the LCD monitor is off. • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180). • The automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure with the following procedures. 1 Turn the mode dial to , or . 2 Press the button to turn on the LCD monitor.
Locking the Flash Exposure Setting (FE Lock) You can obtain the correct exposure regardless of the location of your subject in the composition. button to turn on the LCD monitor. 1 Press the 2 Press the (Flash) button and set the flash to fire (p. 54). the AF frame or the spot metering frame on the subject 3 Focus on which you wish to lock the flash exposure setting and press the shutter button halfway. 4 While pressing the shutter button halfway, press the button.
Switching between the Built-in Flash Adjustment Settings The flash fires with automatic flash adjustments (except in the possible to set it so that it fires without any adjustments. 1 Select [Flash Adjust] from the [ mode), but it is (Rec.)] menu. See Selecting Menus and Settings (p. 36). button. Compensating the Flash Adjustment (+/- (Flash)) The flash adjustment can be changed when [Flash Adjust] is set to [Auto]. The settings can be adjusted in 1/3-stop increments in the range of –2EV to +2EV.
Switching between the Built-in Flash Adjustment Settings (continued) Compensating the Flash Output. In mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps, starting from FULL, when shooting. This setting is also active with slave flash photography where multiple flashes are fired at the subject from different positions because the pre-flash does not fire. 1 Press the / / button. Select (Flash Output) using C or D on 2 the multicontroller.
1st-curtain The flash fires right after the shutter opens, regardless of the shutter speed. Usually, the 1st-curtain is used when shooting. 2nd-curtain The flash fires right before the shutter closes, regardless of the shutter speed. Compared with the 1st-curtain, the flash fires later and this allows you to shoot images in which, for example, a car’s rear lamps seem to trail off behind. Image shot with the 1stcurtain setting Image shot with the 2ndcurtain setting. [ (Rec.
Shooting Images at Set Intervals (Intervalometer) You can shoot images at a set interval. This function can be used for fixed-point observation of plants and blooming flowers. The shooting interval time can be set from 1 to 60 minutes and 2 to 100 images can be shot. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Since the camera may shoot continuously for an extended period of time, the use of the AC Adapter Kit ACK700 (optional) is recommended (p. 162). [Intervalometer] from the [ 1 Select (Rec.)] menu.
• The first image is shot and the interval shooting session starts. • Once the set number of shots is taken the camera automatically powers down regardless of the power-saving function settings. • If the below operations are accessed while the interval shooting is in process, the interval shooting session will be cancelled.
Shooting Problem Subjects for the Autofocus The autofocus may not work well on the following types of subjects. • Subjects with extremely low contrast to the surroundings • Subjects mixing close and far objects • Subjects with extremely bright objects at the center of the composition • Subjects that are moving quickly To shoot these subjects, first aim the camera at an object at a similar distance, lock the focus and recompose the image with the desired subject, or use the manual focus.
Focus Lock Method 2 button to turn on the LCD monitor. 1 Press the the shutter button halfway to lock the focus. Keep it 2 Press pressed and press the button. the image and press the shutter button all the way 3 Recompose to shoot the image. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Focus lock cannot be used while the Shooting mode is set to . ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Some settings are not available with certain Shooting modes.
Shooting Problem Subjects for the Autofocus (continued) Shooting in Manual Focus Mode The focus can be manually set. button to turn on the LCD monitor. 1 Press the the button, then use 2 CPressor Dandonhold the multicontroller. • The focus will lock and the icon and the MF indicator will appear on the LCD monitor. • When the [ (Rec.)] menu’s [MF-Point Zoom] is set to [On], if a particular AF frame has been manually selected, the portion of the image in that frame will appear magnified.
Using the Manual Focus in Combination with the Auto Focus The camera automatically searches for a more suitable focusing point from the current manually focused location. 1 Focus the camera with the manual focus. 2 Press . Shooting - Selecting Particular Effects The camera focuses automatically to a more accurate focusing point near the current focusing point. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ You cannot change the AF frame setting while focusing manually.
Saving Custom Settings You can save frequently used Shooting modes and various shooting settings to the (custom) mode. When necessary, you can then shoot images with previously saved settings by simply turning the shooting mode dial to . Settings that are usually forgotten when the Shooting mode is changed or when the power is turned off (such as macro mode or drive mode) are also remembered. Settings that can be saved to the • • • • mode Shooting mode ( , , , ) , , and mode items that can be saved (p.
Setting the Auto Rotate Function This camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera on end and automatically rotates it to the correct viewing orientation in the display. You can set this function on/off. [Auto Rotate] in the [ 1 Select menu. (Set up)] 2 Select [On] and press the Shooting - Selecting Particular Effects See Selecting Menus and Settings (p. 36). button.
Resetting the File Numbers You can select the way file numbers are assigned. On The file numbers are reset to the start (100-0001) each time a new CF card is inserted. New images recorded on CF cards with existing files are assigned the next available number. Off The file number of the last image to be shot is memorized so that images recorded to a new CF card start from the next number. the [ 1 InReset]. (Set up)] menu, select [File No. See Selecting Menus and Settings (p. 36).
Replaying Displaying Images Individually You can view the recorded images on the LCD monitor. 1 Slide the power/replay lever to the right. The last recorded image appears (single image replay). between images using B or A on 2 Move the multicontroller. Replaying, Erasing • Use B to move to the previous image and A to move to the next. Holding B or A moves more rapidly between images, but the images will not appear as clearly.
Magnifying Images Images can be magnified up to approximately 10 times. 1 Slide the power/replay lever to the right. 2 Slide the zoom lever toward . Magnified approximately 10 times Approximate position Magnified Approximate approximately 5 times position • You can move around the magnified image using B, A, C or D on the multicontroller. • Hold the to cycle button down and slide the zoom lever toward through each setting, approximately 2.5 times, to approximately 5 times and 10 times.
Viewing Images in Sets of Nine (Index Replay) Up to nine images can be viewed at once in index replay. 1 Slide the power/replay lever to the right. 2 Press the button. Movie Frame Selected Image the image selection using B, A, C or D on the 3 Change multicontroller. The C operation in this row displays the previous set of nine images. The D operation in this row displays the next set of nine images. 4 Press the button. • Index replay cancels and the display reverts to single image replay.
Jumping Between Images The display can be advanced or set back 9 images in either single image replay or index replay. Press the button while in single replay (p. 105) or index 1 replay (p. 107). The jump bar appears. 2 The displayed image(s) change. Single Replay • Jump 10 images behind or ahead using B or A on the multicontroller. Jump Bar Index Replay • Jump to the previous or next set of nine images using B or A on the multicontroller. Jump Bar 3 Press the button.
Viewing Movies You can replay the images shot in mode. 1 Slide the power/replay lever to the right. Movies cannot be viewed in index replay. Select a movie using B or A on the 2 multicontroller and press . on it. Select using B or A on the 3 multicontroller and press . • The movie images and sound will play. • You can adjust the volume using C or D on the multicontroller. • When a movie has finished playing, it will display is pressed in this state, the the last frame.
Editing Movies You can delete unwanted portions from the first or second half of a movie clips. 1 Select the movie you wish to edit and press . See Viewing Movies (p. 109). Select (Edit) using B or A on the 2 multicontroller and press . The movie editing panel and the movie editing bar appear. editing method using C or D 3 onSelecttheanmulticontroller.
Select (Save) using C or D on the 6 multicontroller. is selected, the edited movie is not When saved and the camera reverts to replay. [Overwrite] or [New File] using B 7 Select or A on the multicontroller. Replaying, Erasing • [Overwrite] : Saves the edited movie under the same file name as the original movie. The original data is deleted. • [New File] : Saves the edited movie under a new file name. The original data is not deleted.
Rotating Images in the Display Images can be rotated 90º and 270º clockwise on the LCD monitor. Original 90º [Rotate] from the [ 1 Select menu. 270º (Replay)] See Selecting Menus and Settings (p. 36). an image you want to rotate 2 Select using B or A on the multicontroller and press . The image cycles to the next orientation (90º ➝ 270º ➝ original) each time is pressed. 3 Press the button. The Replay menu appears again. Press the menu.
Attaching Sound Annotations to Images In replay mode (including single replay, index replay, magnifying replay and the replay immediately after shooting in Shooting mode) you can attach sound annotations (up to 60 seconds) to an image. The sound data is saved in WAVE format. 1 Press the button while replaying images. The A / V panel appears. Select (Record) using B or A on the 2 multicontroller, then press . Replaying, Erasing • The recording starts and the elapsed time is displayed.
Automated Playback (Slide Show) Slide show image settings are based on DPOF standards (p. 122). Starting a Slide Show All images, or a selection of images, can be displayed one-by-one in an automated slide show. All Images Plays all the images on the CF card in order Slide Show 1 - 3 Plays the images selected for each show in order (p. 115) In the [ (Replay)] menu, select [Slide 1 Show] and press . See Selecting Menus and Settings (p. 36). Select [Program] using C or D on the 2 multicontroller.
Selecting Images for Slide Shows You can mark images for inclusion in slide shows 1-3. Up to 998 images may be marked per slide show. Images display in the order of their selection. 1 Display the slide show menu (p. 114). Select [Program] using C on the 2 multicontroller. Then select [Show 1], [Show 2] or [Show 3] using B or A on the multicontroller. A checkmark will appear beside a show already containing images.
Automated Playback (Slide Show) (continued) Adjusting the Play Time and Repeat Settings You can change the play time for all the images in a show and have the show repeat itself continuously. Play Time Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 seconds, 15 seconds, 30 seconds and Manual. Repeat Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped. 1 Display the slide show menu.
5 Press the button. Replaying, Erasing The set up menu closes. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • The display interval may vary somewhat for some images. • Slide shows can be easily edited on a computer with the supplied software. See the Software Starter Guide.
Protecting Images You can protect important images from accidental erasure. the [ (Replay)] menu, select 1 In[Protect] and press . See Selecting Menus and Settings (p. 36). an image you want to protect 2 Select using B or A on the multicontroller and press . • The icon appears on protected images. • To remove the protection, press again (in protection mode). • You can make the selection of images easier by toggling between single replay and Index replay button. with the 3 Press the button.
Erasing Erasing Images Individually ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Please note that erased images cannot be recovered. Exercise caution before erasing a file. 1 Set the camera to the replay mode (p. 26). Select the image you wish to erase using B or A on the 2 multicontroller and press the button. [Erase] using B or A on the 3 Select multicontroller and press . Replaying, Erasing To cancel instead of erasing, select [Cancel] and press .
Erasing All Images ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Please note that erased images cannot be recovered. Exercise caution before erasing a file. 1 Inall]theand[ press(Replay)]. menu, select [Erase See Selecting Menus and Settings (p. 36). [OK] using B or A on the 2 Select multicontroller and press . To cancel instead of erasing, select [Cancel] and press . ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Protected images cannot be erased with the erase function (p. 118).
Formatting a CF Card You should format a new CF card or one from which you wish to erase all images and other data. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Please note that formatting (initializing) a CF card erases all data, including protected images and other file types. Please check the contents of the CF card before formatting it. In the [ (Set up)] menu, select [Format] 1 and press . Replaying, Erasing See Selecting Menus and Settings (p. 36).
Printing About Printing This camera supports direct printing. By connecting the camera to an optional direct print compatible printer (CP series)*1 or Bubble Jet printer (sold separately) that supports the direct print function, you can send the images from the CF card directly to the printer using the camera buttons.
Please refer to the System Map supplied with your camera for direct print function compatible printer (CP series) information. Print Settings for Direct Print Function • Select how many copies you want (p.131) • Select the print style (p.131) • Standard / Multiple • Bordered / Borderless • Date On / Off Printing, Transferring • Select the print area (Trimming) (p.133) DPOF Print Settings • Select the image you want to print (p. 135) • Select how many copies you want (p. 135) • Select the print style (p.
Selecting from the Print Order Menu Use the Print Order Menu as shown below to select all print settings. However, set the camera to replay mode beforehand.
: Turns the menu on/off : Selects items and settings : Sets items and settings Image (p. 131) Paper (p. 131) Style ➔ Borders (p. 131) ➔ Date (p. 131) Number of copies (p. 131) Order Number of copies (p. 135) Print Type (p. 137) ➔ ➔ Set up Date (p. 137) File No. (p. 137) Reset (p. 139) 125 Printing, Transferring Trimming (p.
Connecting the Camera to a Printer You can make clear prints swiftly and easily when you connect the camera to an optional direct print function compatible printer (CP series) or a direct print function compatible Bubble Jet printer (optional). It can also be used with DPOF print settings. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ You are recommended to use the optional AC Adapter Kit ACK700 to power the camera when it is connected to the printer.
the printer’s ON/OFF button to turn 4 Press on the power. • When the printer is properly connected to the appears on the camera camera, it powers up, LCD monitor and the power/mode indicator is lit in green. • With the Card Photo Printer CP-10, the power turns on when the power cord is connected to the printer as shown in Step 2. Connecting Bubble Jet Printer to the Camera ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 1 Turn off the camera (p. 24).
Connecting the Camera to a Printer (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ When you detach the cable from the camera, hold the plug and do not pull by the cable. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • On Bubble Jet printers with operation panels, images cannot be printed through the operation panel while the camera is connected. • The following operations cannot be performed while the printer is connected.
Printing * The following illustrations show examples from a direct print function compatible printer (CP series). Options for the Style category will differ slightly for BJ printers. An image can be printed when displayed in single replay or selected in index replay. an image using B or A on the multicontroller and 1 Choose press . the number of prints, the print style and cropping settings 2 Set as required. • Selecting the Number of Copies (p. 131) • Setting the Print Style (p.
Printing (continued) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ You cannot print movies or images recorded in the RAW format. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Cancel Printing • To cancel printing between images printed, press . A confirmation dialog appears. Select [OK] using B or A on the multicontroller and press . – Direct Print Function Compatible Printers (CP Series) A print in progress cannot be stopped.
Setting the Print Settings (Direct Print Function) Selecting the Number of Copies In Replaying mode, press and select 1 the [Copies] option using C or D on the multicontroller. Specify the desired number of copies using B or A on the 2 multicontroller. You can specify from 1 to 99 prints. Setting the Print Style Printing, Transferring You can select from among the following print styles. Direct Print Function Compatible Printer (CP Series) Image Borders Standard Prints one image per page.
Setting the Print Settings (Direct Print Function) (continued) the print setting menu, choose [Style] 1 Inusing C or D on the multicontroller and press again. [Image] (or [Paper]), [Borders] or 2 Choose [Date] using C or D on the multicontroller. 3 Select settings using B or A on the multicontroller. Image Settings (Direct print compatible CP series printer) Paper (Direct print compatible BJ printer) Select [Standard] or [Multiple]. Select [Card #1], [Card #2], [Card #3], [LTR] or [A4].
4 Press the button. With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly. If you have not specified a trimming setting, a frame will appear around the area of the image that will be printed, allowing you to check the portion that will be cropped. Print Area Frame ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • The date settings are overridden by the DPOF settings if you are using them to print (p.
Setting the Print Settings (Direct Print Function) (continued) 2 Trim the Image. Changing the Size of the Trimming Frame • Slide the zoom lever toward or . • The trimming frame can be changed to a minimum selection of approximately half the displayed image or a maximum selection that is virtually the same size as the image. • When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the magnifying rate.
Print Settings (DPOF Print Settings) You can select images on a CF card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer (CP series) or a direct print function compatible BJ printer. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • The mark appears on images that have had print marks set by another DPOFcompliant camera.
Print Settings (DPOF Print Settings) (continued) 3 Select images for printing. Number of Copies Single Images • When the print type (p. 137) is set to [Standard] or [Both], select an image using B or A on the multicontroller. You can set the number of copies (up to 99) to be printed using C or D on the multicontroller. • When the print type (p. 137) is set to [Index], select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller.
Setting the Print Style Always select a print style after having selected the image you wish to print. The following print settings can be selected. Print Type Standard Prints one image per page Index Prints the selected images together at a reduced size in an index format Both Prints the images in both the standard and index formats Date Adds the date to the print File No. Adds the file number to the print In the [ (Replay)] menu, select [Print 1 Order] and press .
Print Settings (DPOF Print Settings) (continued) Date Select [On] or [Off]. File No. Select [On] or [Off]. 5 Press the button. The set up menu will close and the Print Order menu will reappear. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • When [Print Type] is set to [Index], the [Date] and [File No.] cannot be set to [On]. • If [Print Type] is set to [Both], both [Date] and [File No.] can be set to [On], however, only the file number is printed for the index print.
Resetting the Print Settings The print settings can all be removed at once. The print type is reset to [Standard] and the date and file number options are set to [Off]. the [ (Replay)] menu, select [Print 1 InOrder] and press . See Selecting Menus and Settings (p. 36). Select [Reset] using B or A on the 2 multicontroller and press . Printing, Transferring [OK] using B or A on the 3 Select multicontroller and press .
Printing with DPOF Print Settings You can use the DPOF print settings to print with an optional direct print function compatible printer (CP series) or with a direct print function compatible BJ printer (optional). In the [ (Replay)] menu, select [Print 1 Order] and press . See Selecting Menus and Settings (p. 36). Select [Print] using C, D, B or A on the 2 multicontroller and press . 3 Set the print style settings as required. • See Setting the Print Settings (p. 131).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • To print the date, set the [Date] setting in the print order menu in Step 2 on the previous page to [On]. You cannot set the date to print with the [Style] menu in Step 3 on the previous page. If the print type is set to [Index], the date will not print even if the [Date] setting is set to [On] in Step 2. • When the print type is set to [Both], it is possible to have both the [Date] and [File No.
Image Transfer Settings (DPOF Transfer Order) Using the camera, you can make marks on images you wish to transfer and attach to e-mails. (Please use the supplied software for actually transferring images. Refer to the Software Starter Guide for instructions on how to transfer images.). These settings are compatible with the Digital Print Order Format (DPOF) standards.
3 Select images for transferring. Single Images • Select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller. • You can use the same procedures to select images in index replay (3 images). Press the button to switch between single replay and index replay. All the Images on a CF Card • Press the button to switch to index replay (three images). • Then press , and select [Mark All] using C or D on the multicontroller and press again.
Viewing Images on a TV Set A video-compatible television connected via the supplied AV cable AVC-DC100 can be used to view images as you shoot or replay them. 1 Turn off the camera (p. 24). Attach AV Cable AVC-DC100 to the 2 terminal on the camera. 3 Yellow Plug To the Video In Jack Black Plug To the Audio In Jack Plug the other ends of the AV cable to the video in and audio in jacks on the TV. 4 Turn on the TV and switch it to Video mode. on the camera in Shooting mode or Replaying mode 5 Turn (p.
Downloading Images to a Computer Download images taken with the camera to a computer in one of the following ways: • Connect the camera to a computer with the USB cable You can then download images directly from the camera to a computer. • Directly from the CF card Using a laptop computer or a card reader, you can download images directly from the CF card.
USB port Terminal 1. Open the terminal cover with your fingernail. 2. Insert the connector until it clicks. USB cable 2. USB cable 1. Terminal cover To disconnect the cable from the camera: Hold the cable connector firmly at both sides and pull it straight out. For information about what to do after making the connection, please refer the Software Starter Guide. Downloading Images without Installing the Software (Windows XP and Mac OS X (10.1 or 10.2) only) If you are using Windows XP or Mac OS X (10.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • It is recommended to power the camera with the optional AC Adapter Kit ACK700 when connected to a computer (p. 162). • If you disconnect the USB cable while the camera is on, the camera will automatically turn off. • All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed. Downloading Directly from a CF Card 1 Eject the CF card from the camera, and insert it into a CF card reader connected to the computer.
List of Menu Options and Messages Rec. Menu * Some items may not appear in certain Shooting modes (p. 180). *Default setting Item Menu Screen Settings Content Reference Page Flash Sync Sets the timing at which the flash fires. • 1st-curtain* • 2nd-curtain 95 Slow Synchro Sets the slow synchro. • On • Off* 55 Flash Adjust Sets whether or not the flash is adjusted automatically. • Auto* • Manual 93 Red-eye Sets whether or not the red-eye reduction lamp fires.
Item Menu Screen Settings Content Reference Page Sets the output of the AF-assist beam according to shooting conditions when using the auto focus. • On* • Off 34 Digital Zoom Sets whether or not the digital zoom combines with the optical zoom to zoom images. • On • Off* 65 Review Sets the duration images display on the LCD monitor after the shutter button is released. • Off • 2 sec.* to 10 sec. 48 Intervalometer Shoots automatically at set intervals.
Replay Menu *Default setting Item Menu Screen Settings Content Reference Page Protect Protects images from accidental erasure. 118 Rotate Rotates images 90 or 270 degrees clockwise in the display. 112 Erase all Erases all images from a CF card (excluding protected images). 120 Slide Show Plays images in an automated slide show. 114 Print Order Sets the images that will be printed on a DPOF-compatible printer or at a photo lab service, the number of copies and other parameters.
Set up Menu *Default setting Menu Screen Settings Content Reference Page Beep Sets whether or not the beep sounds when the shutter button is pressed or when a menu operation is performed. See also "How the [Beep] setting in the [ (Set up)] menu and each sound setting in the [ (My Camera)] menu are related" on page 156. • On* • Off (Still beeps to warn of an error even when set to Off) 33 LCD Brightness Sets the brightness level of the LCD monitor.
Set up Menu (continued) *Default setting Item Menu Screen Settings Content Shutter Volume Adjusts the sound volume when the shutter button is pressed all the way. There is no shutter sound in Movie mode. • (Off) • (1) • (2)* • (3) • (4) • (5) Playback Vol. (Replay) Adjusts the sound volume when a sound annotation or a movie is played. • (Off) • (1) • (2)* • (3) • (4) • (5) Start-up Vol. Adjusts the sound volume when the camera powers up.
Item Menu Screen Settings Content Reference Page Adjusts the sound volume of the Operation Sound. • (Off) • (1) • (2)* • (3) • (4) • (5) 34 Selftimer Vol. Adjusts the sound volume of the Selftimer Sound informing you that the photo will be taken in 2 seconds. • (Off) • (1) • (2)* • (3) • (4) • (5) 64 File No. Reset Sets how file numbers are assigned to images when new CF cards are inserted.
Set up Menu (continued) *Default setting Item Language Menu Screen Settings Content Sets the language used in the menus and messages on the LCD monitor. The menu may appear differently in some regions. • English* • Italiano • Deutsch • Norsk • Français • Svenska • Nederlands • Español • Dansk • Chinese • Suomi • Japanese You can change the language during image replay by holding the button Reference Page 23 and pressing the button.
My Camera Menu You can select the theme, start-up image and sound, shutter sound, operation sound and selftimer sound used on this camera. These are called My Camera settings. You can also customize the [ ] and [ ] options for each item with images from the CF card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details. *Default setting Item Menu Screen Settings Content Reference Page Selects a common theme for each My Camera settings item.
My Camera Menu (continued) *Default setting Item Menu Screen Selftimer Sound Reference Page Settings Content Sets the sound informing you that the photo will be taken in 2 seconds.*1 • (Off) • 1 * 40 • • Shutter Sound Sets the shutter sound when you 40 depress the shutter button. There is no shutter sound while a movie is being shot.
Resetting the Settings to Default You can reset the menu and button operation settings to default except for the [Date/Time], [Language], and [Video System] settings. 1 Turn on the camera. You can turn on the camera into either Shooting or Replaying mode. the 2 Press 5 seconds. button for longer than The message “Reset settings to default?” appears on the LCD monitor. [OK] using B or A on the 3 Select multicontroller, then press . Appendix • The screen on the right appears while resetting.
List of Messages The following messages may appear on the LCD monitor. Reset settings to default?: Do you wish to reset all the camera and menu settings to default? Resetting: Resetting all the camera and menu settings to default Busy...: Image is being recorded to, or read from, CF card. Resetting settings to default. No memory card: You attempted to shoot or replay images without a CF card installed. Cannot record!: You attempted to shoot an image without a CF card installed.
RAW: You attempted to replay an image recorded in an incompatible RAW format. Cannot magnify!: You attempted to magnify an image that was photographed with another camera, recorded in a different format, or edited on a computer. Cannot rotate: You attempted to rotate an image that was photographed with another camera, recorded in a different format, or edited on a computer.
List of Messages (continued) The following messages may appear on the camera’s LCD monitor when a direct print compatible printer (CP series) is printing. Depending on the printer model, some messages may not display. No Paper: Paper cassette is incorrectly inserted or out of paper. Or the paper feed isn’t operating correctly. No Ink: The ink cartridge has not been inserted or has run out of ink. Incompatible paper size: Wrong paper size is loaded in the printer.
The following messages may appear when the camera is connected to the Direct Print compatible Bubble Jet Printer. On Bubble Jet printers with operation panels, check the error number displayed on the panel and refer to the Bubble Jet Printer Quick Start Guide. Printer in use: The printer is printing the data from the memory card inserted in the computer or printer. The printer automatically starts printing the images from the camera after completing the current printing.
Appendices Using an AC Adapter Kit (Optional) You are advised to use AC Adapter Kit ACK700* (optional) for long periods of use and when connecting to a computer or printer. * Consists of Compact Power Adapter CA-PS700, DC Coupler DR-700 and a power cord. 1 Connect to Power Supply Attach the power cord to the compact power adapter and plug it into a power outlet. Compact Power Adapter CA-PS700 2 Connect the DC plug of the compact power adapter cable to the DC Coupler DR-700 terminal.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Appendix • Always turn the camera’s power off before connecting or disconnecting the compact power adapter (p. 24). • Use of any adapter other that AC Adapter Kit ACK700 may cause malfunction of the camera or AC adapter kit.
Using a Car Battery Charger (Optional) Car Battery Charger CBC-NB2 (sold separately) can be used to charge battery packs from an automobile’s cigarette lighter socket. Always ensure that the automobile’s engine is running when you use the car battery charger. Use of it with the engine off may flatten the battery in some automobiles. Always unplug the car battery charger before turning off the engine.
Using the Waterproof Case (Optional) Some of the camera's operations differ slightly when it is used in the waterproof case WP-DC300 (sold separately). Please operate the camera according to the below information. Camera Operations (without the waterproof case) Turning off the power Selecting menus using the button or the / / Camera Operations with the Waterproof Case / Hold the / button for more than 5 seconds.
Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Camera body Wipe the body clean with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. • Never use synthetic cleansers on the camera body or lens.
Troubleshooting Camera will not record Lens will not retract Cause Solution Power is not turned on Turn on the camera. 24). See Turning the Power On / Off (p. CF card slot/battery cover opened Confirm that the CF card slot/battery cover is securely closed. Insufficient battery voltage Fully charge the battery or use a household power source. Poor contact between camera and battery terminals Wipe the terminals with a clean, dry cloth.
Troubleshooting (continued) Problem Battery pack consumed quickly Cause Solution Battery pack capacity reduced because of disuse for one year or more after being fully charged Replace the battery pack with a new one. Battery life exceeded Replace the battery pack with a new one. Battery pack will not charge Battery life exceeded Replace the battery pack with a new one. Poor contact between battery charger and battery • Clean the battery terminals with a clean dry cloth.
Cause Subject in recorded Subject too far for flash to image is too dark reach Subject too close Subject in recorded image is too Subject bright in comparison bright to the background Solution Raise the ISO sensitivity and then shoot. See Changing the ISO Speed (p. 85) Adjust the flash output with the flash exposure compensation function (p. 93). • Set the exposure compensation to a negative (-) setting. • Use the AE lock or spot metering function. See Locking the Exposure Setting (AE Lock) (p.
Specifications All data is based on Canon’s testing standard. Subject to change without notice. PowerShot S50 Camera effective pixels: Image sensor: Lens: Digital tele-converter: Optical viewfinder: LCD monitor: Autofocus method: Shooting distance (from tip of the lens barrel): Shutter: Shutter speeds: Light metering system: Exposure control method: Exposure compensation: Sensitivity White balance: Flash: 170 Approx. 5 million 1/1.8 inch CCD (Total number of pixels: approx. 5.3 million) 7.1 (W) - 21.
Flash exposure compensation: Shooting modes: Continuous shooting: Interval shooting: Self-timer: PC-connected shooting: Storage media: File Format: Image Still images: recording format Movies: Compression mode: Number of Still images: recording pixels: Movies: Replay modes: Display languages My Camera Settings (customizing): (When sensitivity is set to AUTO) 35 cm - 4.8 m (1.1 ft. - 15.7 ft.) (W), 35 cm - 3 m (1.15 ft. - 9.8 ft.) (T) (When sensitivity is set to ISO 100 equivalent) 55 cm – 4 m (1.8 ft.
Specifications (continued) Interface: Power source: Operating Temperatures: Operating Humidity: Dimensions (W × H × D): Weight: (W): wide angle (T): telephoto Universal Serial Bus (mini-B, PTP [Picture Transfer Protocol]) Audio/Video Output (NTSC or PAL selectable, monaural audio) 1. Rechargeable Lithium-ion battery (type: NB-2L) (supplied) 2. AC Adapter kit ACK 700 (optional) 3. Car Battery Charger Kit CBC-NB2 (Optional) 0 – 40°C (32 – 104°F) 10 – 90% 112 × 58 × 42 mm (4.4 × 2.3 × 1.7 in.
CF Cards and Estimated Capacities (Recordable Images) FC-16M L (Large) M 1 (Medium) M 2 (Medium) 2592 x 1944 pixels 1600 x 1200 pixels 1024 x 768 pixels S (Small) 640 x 480 pixels RAW 2592 x 1944 pixels Movie FC-32M FC-64M FC-128M FC-256MH* 5 11 24 49 99 10 21 43 88 177 21 43 88 176 355 14 30 61 122 246 26 54 109 219 440 52 108 217 435 868 25 53 107 215 431 46 94 189 379 762 84 174 349 700 1390 58 120 241 482 962 94 196 393 788 1563 165 33
Battery Pack NB-2L Type: Nominal voltage: Nominal amperage: Charge cycles: Operating temperatures: Dimensions: Weight: Rechargeable lithium ion cell 7.4 V 570 mAh Approx. 300 0 - 40º C (32 - 104º F) 33.3 × 45.2 × 16.2 mm (1.3 × 1.8 × 0.6 in.) Approx. 40 g (1.4 oz.) Battery Charger CB-2LT / CB-2LTE Input voltage: Rated output: Charging time: Operating temperatures: Dimensions: Weight: AC 100 - 240 V (50/60 Hz) 0.17 A (100V) - 0.10 A (240V) 8.4 V DC, 0.5 A Approx.
CompactFlash™ Card Type I 36.4 x 42.8 x 3.3 mm (1.4 x 1.7 x 0.1 in.) Approx. 10 g (0.4 oz.
Index Print Settings 135, 140 Transfer Order 142 A AC Adapter Kit 162 AEB Mode 86 AE Lock 90 AF Frame Auto Selection 74 Manual Selection 74 ) 71 Aperture-Priority AE ( Aperture Value 67, 69, 71, 73 ) 45 Auto Mode ( Auto Exposure Bracketing (AEB Mode) Auto Replay (Slide Show) 114 A/V Out Terminal 10, 144 E 86 B Battery Pack Charging 15 Handling Precautions Installing 17 Low Status 18 Performance 172 Battery charger 15 Beep 151, 152, 153 Black and White Mode Brightness LCD Monitor 151 16 83 C Camera
M Macro Mode ( ) 63 Magnifying Images 106 Manual Exposure ( ) 73 Focus ( ) 100 Setting Image Characteristics Shooting Mode 73 Menu List of Options 148 Rec 148 Replay 150 Selecting Menus and Settings Set up 152 - 154 Messages 158 Movie ( ) Shooting 62 Replaying 109 Editing 110 My Camera Menu 155 Settings 40 Registering 42 N Night Scene Mode ( ) 57 O Overexposure Warning 31 Operation Sound 40 - 41, 155 P PC Connection Mode 147, 154 Photo Effect 83 Play 105 Portrait Mode ( ) 56 Program AE ( ) 67 Protect
Sound 24, 40 - 41, 155 Stitch Assist Mode ( ) 59 Framing Subjects 59 Shooting 60 Strap 11 T Telephoto 35 Transfer Order Reset 142 Selecting Images 142 Troubleshooting 167 - 169 V Video System 144, 154 Viewfinder LCD Monitor 12, 28 Optical 11, 32 Volume Replay 152 Shooting 152 W WAVE Files 30, 44, 113 White Balance 80 Wide Angle 35 Z Zoom 178 35, 65, 106
FCC Notice Digital Camera, Model PC1048 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode. You can shoot with the settings saved in the mode.
