ENGLISH DIGITAL CAMERA Before Using the Camera Shooting Playback/Erasing Print/Transfer Settings Viewing Images on a TV set Customizing the Camera Advanced Camera User Guide CDI-E254-010 XX06XXX © 2006 CANON INC. PRINTED IN JAPAN Troubleshooting List of Messages Advanced Appendix Camera User Guide This guide explains camera features and procedures in detail.
Main Features Shooting zAutomatically adjusts shooting settings to match particular conditions (Scene mode) zVertical shooting function (Vertical Shutter Release) zAvoid the effects of camera shake or blurry subjects when shooting by using high ISO speed zAutomatically detects camera orientation with an Intelligent Orientation sensor zChanges image colors to create special effects (Color Accent, Color Swap) Camera Station Wireless Controller Transfers data to a computer zEffortlessly transfers data with
Conventions Used in this Guide Icons appearing below titles indicate the modes in which the procedure can be used. Mode Switch Continuous Shooting Shooting Mode See Functions Available in Each Shooting Mode (p. 144). In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide. This mark denotes issues that may affect the camera’s operation.
Table of Contents Items marked with a are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . . 1 Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Please Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preventing Malfunctions . . . . . . . . . . . . . . . . . . . . . . .
Switching between Focusing Modes. . . . . . . . . . . . . . . . . . . Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) . . Switching between Metering Modes . . . . . . . . . . . . . . . . . . . Adjusting the Exposure Compensation . . . . . . . . . . . . . . . . . Shooting in Long Shutter Mode . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Tone (White Balance) . . . . . . . . . . . . . . . . . . . . Shooting in a My Colors Mode . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Images on a TV set . . . . . . . . . . . . . . . . . . . . . . . . 97 Customizing the Camera (My Camera Settings) . . . . . . . . 98 Changing My Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . 98 Registering My Camera Settings . . . . . . . . . . . . . . . . . . . . . . 99 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When the power is turned on . . . . . . . .
Handling Precautions Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
Warnings Equipment z Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. z Store this equipment out of the reach of children and infants. • Wrist strap: Placement of the strap around the child's neck could result in asphyxiation. • Memory card: Dangerous if accidentally swallowed. If this occurs, contact a doctor immediately. z Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide.
Battery z Do not place the battery near a heat source or expose it to direct flame or heat. z The battery should not be immersed in water or sea water. z Do not attempt to disassemble, alter or apply heat to the battery. z Avoid dropping or subjecting the battery to severe impacts that could damage the casing. z Use only recommended battery and accessories. Use of battery not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
Others z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. z Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera. Such items may lose data or stop working.
Equipment z Do not connect compact power adapters or battery chargers to devices such as electrical transformers for foreign travel because it may lead to malfunctions, excessive heat generation, fire, electric shock or injury. Flash z Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. z Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash.
Preventing Malfunctions Avoid Strong Magnetic Fields z Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Before Using the Camera—Basic Operations Using the LCD Monitor You can switch between display styles for information shown on the LCD monitor as follows. 1 (Set up) Menu [Info Display]. See Menus and Settings (p. 23). 2 [Shooting Info]/[Review Info]/[Replay Info] Select a display mode. See Menus and Settings (p. 23). zIn a shooting mode, the shooting information will display for approximately 6 seconds when you change a setting, regardless of the selected info display mode setting.
Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting Method 1 Hold the FUNC./SET button down while turning on the power. Method 2 In a shooting mode, hold the FUNC./SET button down. zYou can change the display color by pressing the or button. zThe clock display will cease when the display interval is over or when you operate the FUNC./SET, MENU or shutter button or the mode switch.
Information Displayed on the LCD Monitor Shooting Information (Shooting mode) * Spot Frame * AF Frame (p. 44) Zoom Magnification* (p. 33) Macro (Basic Guide p. 17) Metering Mode (p. 47) Flash (Basic Guide p. 16) Auto Rotate (p. 62) Rec. * Movie Recording (p. 38) * Low Battery (p. 115) 3:2 Guide* (p. 36) Grid Lines* (p. 36) • Stills: Recordable Shots • Movies: Remaining Time/ Elapsed Time * * * * * Shooting Mode (pp. 38, 42, 56, 58, Basic Guide pp. 13 – 15) * AF Lock (p. 45) Time Zone (p.
z If the indicator blinks orange and the camera shake icon displays, it indicates there is insufficient illumination and a slow shutter speed will be selected. Shoot using the following methods. - Raise the ISO speed (p. 61). - Select a flash setting other than (flash off) (Basic Guide p. 16). - Attach the camera to a tripod or other device. Review Info Auto Category (p. 24) Histogram (p. 18) Folder Number/File Number Metering Mode (p. 47) ISO Speed (p. 61) Exposure Compensation (p.
Playback Information (Playback Mode) Standard WAVE Format Sound (p. 80) Folder Number-File Number Shooting Date/Time Protection Status (p. 87) Total number of images Displayed image number Compression (Still Images) (p. 30) Recording Pixels (Still Images) (p. 30) Movie (p.
Detailed My Category (p. 69) Defined Playback (p. 70) Histogram Long Shutter Mode (p. 49) Flash (Basic Guide p. 16) Macro (Basic Guide p. 17) Metering Mode (p. 47) ISO Speed (p. 61) My Colors (Shooting) (p. 54), Color Accent/Color Swap (p. 56) Image with the My Colors effect (p. 78) White Balance (p. 51) Recording Pixels/Frame Rate (Movies) File Size (p. 41) Exposure Compensation (p. 48) Recording Pixels (Still Images) (p. 30) Movie Length (Movies) (p.
Histogram Function The histogram is a graph that allows you to check the brightness of the image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 48).
Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off].
Setting the World Clock When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings. Setting the Home/World Time Zones 1 (Set up) Menu [Time Zone] See Menus and Settings (p. 23). 2 3 . Use the or button to select a home time zone . zTo set the daylight saving option, use the or button to display .
5 Use the or tion time zone button to select a destina. zAs in Step 3, you can set daylight saving time. 6 Time Difference from the Home Time Zone Switching to the Destination Time Zone 1 (Set up) Menu [Time Zone] . See Menus and Settings (p. 23). 2 Use the select or button to . zTo change the destination time zone, use the FUNC./SET button. zWhen you switch to the destination time zone, will display on the monitor.
Menus and Settings Menus are used to set the shooting, playback and print settings as well as such camera settings as the date/time and electronic beep. The following menus are available. zFUNC. Menu zRec., Play, Print, Set up and My Camera Menus FUNC. Menu This menu sets many of the common shooting functions. This example shows the FUNC. menu in (Auto) mode. Slide the mode switch to or . Press the FUNC./SET button. Use the or button to select a menu item.
Rec., Play, Print, Set up and My Camera Menus Convenient settings for shooting, playback or printing can be set with these menus. (Rec.) Menu (Set up) Menu (My Camera) Menu zThis example shows the Rec. menu in (Auto) mode. zIn playback mode, the Play, Print, Set up and My Camera menus display. Press the MENU button. Use the or button to switch between menus. Use the or button to select menu items. • Some items may not be selectable in some shooting modes. Use the or button to select an option.
Menu List FUNC. Menu The icons shown below are the default settings. Menu Item Page Menu Item Shooting Mode Basic p. 12 Drive Mode p. 34, Basic p. 18 Movie Mode p. 38 My Colors p. 54 Exposure Compensation p. 48 Compression (Still Image) p. 30 Long Shutter Mode p. 49 Recording Pixels (Still Image) p. 30 ISO Speed p. 61 White Balance p. 51 Recording Pixels Frame Rate (Movie) Rec. Menu Options Page/Topic AiAF Face Detect*/On/Off p. 44 Slow Synchro On/Off* p.
Long Shutter On/Off* *1 p. 49 left to right*/ right to left Stitch Assist p. 42 They are classified according to the following categories. People: , , or images with faces detected if [Face Detect] has been selected in [AiAF] mode. Scenery: , Events: , , , , , Play Menu Menu Item Page p. 82 Menu Item Sound Memo Page p. 80 My Category p. 69 Rotate p. 76 Erase p. 89 Transfer Order p. 95 Protect p. 87 Transition p. 77 My Colors p.
Set up Menu Menu Item Mute Options On/Off* Volume Off/1/2*/3/4/5 Start-up Vol. Operation Vol. Selftimer Vol. Shutter Volume Playback Vol. Info Display Shooting Info Review Info Off*/On Off*/On Replay Info Off*/Standard/ Detailed -7 to 0* to +7 LCD Brightness Power Saving Auto Power Down Display Off 26 * Default setting Page/Topic Set to [On] to silence all sounds except warning sounds. (Basic p.
Time Zone Date/Time Home*/World Clock Display 0–10*1 sec./20 sec./30 sec./1 min./2 min./3 min. Format File Numbering p. 20 Basic Guide p. 11 p. 13 You can also set it to perform a low level format (p. 29). Continuous*/ Auto Reset Lens Retract 1 min.*/0 sec. Language Video System Print Method Reset All NTSC/PAL Auto*/ p. 65 p. 63 Creates a folder for the next shooting session. You can also set the Auto Create time. p. 62 Sets the units used to display distances in the macro mode. (Basic p.
My Camera Menu Menu Item * Default setting Available Settings Theme Selects a common theme for each My Camera settings item. Start-up Image Sets the image displayed when the camera power is turned on. Start-up Sound Sets the sound played when the camera power is turned on. Operation Sound Sets the sound played when any button other than the shutter button is pressed. Selftimer Sound Sets the sound played 2 seconds before the shutter releases in self-timer mode.
Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. 1 (Set up) Menu [Format]. See Menus and Settings (p. 23). Select [OK] and press . zTo perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark.
Shooting Changing the Recording Pixels and Compression (Still Images) Shooting Mode 1 FUNC. Menu * (Recording Pixels) * (Compression). See Menus and Settings (p. 22). * Default setting. zUse the or button to select recording pixels/compression settings and press the FUNC./SET button. Approximate Values for Recording Pixels Recording Pixels Purpose* 3072 x 2304 High Printing to about A3-size pixels 297 x 420 mm (11.7 x 16.5 in.) Printing to about A4-size 210 x 297 mm (8.3 x 11.7 in.
Approximate Values for Compression Settings Compression Superfine Fine Normal Purpose High Quality Shoot higher quality images Shoot normal quality images Normal Shoot more images z See Image Data Sizes (Estimated) (p. 130). z See Memory Cards and Estimated Capacities (p. 128).
Red-Eye Reduction Function Shooting Mode Setting the red-eye reduction function* to [On] causes the red-eye reduction lamp to fire with the flash. *This function reduces the effect of light reflecting back from the eyes and making them appear red. 1 (Rec.) Menu [Red-Eye] [On]*/[Off]. See Menus and Settings (p. 23). *Default setting. Setting the Slow Synchro Function Shooting Mode You can shoot with the flash at slow shutter speeds.
Using the Digital Zoom Shooting Mode You can shoot zoomed images using the combined digital and optical zooms. The focal lengths (35 mm film equivalent) and characteristics are as follows. Option Focal Length Characteristics On 38 – 360 mm You can shoot at a maximum zoom factor of approximately 10x using a combination of the optical and digital zoom features. Off 38 – 90 mm Shoots without using the digital zoom. 1 (Rec.) Menu [Digital Zoom] or (Postcard [On]*/[Off]. See Menus and Settings (p.
Continuous Shooting Shooting Mode In this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*, you can shoot continuously at a set shooting interval until the memory card is full (smooth continuous shooting) (p. 128). *Recommended Memory Card Super high speed SDC-512 MSH memory card (sold separately) newly formatted with low level formatting (p. 29). • This reflects standard shooting criteria established by Canon.
Postcard Mode Shooting Mode You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor. 1 FUNC. Menu * (Postcard). See Menus and Settings (p. 22). *Default setting. zThe recording pixels are set to (1600 x 1200) and the compression to (Fine). zThe area that will not print displays in gray. Shooting The digital zoom cannot be used in this mode.
Setting the Display Overlay Shooting Mode You can check a composition’s horizontal and vertical alignment as well as a 3:2 aspect ratio print range on the LCD monitor by using a shooting guide while shooting. Displays grid lines dividing the monitor into 9 areas, Grid Lines allowing you to check the subject’s horizontal and vertical alignment. You can check what can be printed in a composition using a 3:2 aspect ratio. The portion that will not print displays in 3:2 Guide gray.
Shooting Vertically (Vertical Shutter Release) Shooting Mode With the camera held vertically, you can release the shutter by pressing the button in place of the shutter button. You can also shoot with the shutter button. 1 (Rec.) Menu [Off]. [Vert. Shutter] [On]*/ See Menus and Settings (p. 23). *Default setting. Select a shooting mode. Shooting 2 3 Hold the camera vertically, aim at the subject and press the button. zThe button will behave as follows.
Movie Shooting Shooting Mode The following movie modes are available. For information on the recording pixels and frame rate in each mode, refer to Changing Recording Pixels and Frame Rates (p. 41). Standard You can select the recording pixels and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode. (p.
1 FUNC. Menu * (Standard). See Menus and Settings (p. 22). *Default setting. zUse the or button to select a movie mode and press the FUNC./ SET button. or mode, you can zIn , change the recording pixels and frame rate (p. 41). zSee Changing Colors (p. 56) for the procedures for using and . 2 Shoot. Shooting zPressing the shutter button halfway automatically sets the exposure, focus and white balance settings. zPressing the shutter button fully starts recording video and sound simultaneously.
z You are recommended to use a memory card that has been formatted in your camera to shoot movies (p. 29). The card supplied with the camera may be used without further formatting. z Be careful of the following while recording. - Try not to touch the microphone. - Do not press any buttons other than the shutter button. The sound that buttons make will be recorded in the movie. - The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording.
Changing Recording Pixels and Frame Rates You can change the recording pixels and frame rate when the movie mode is set to (Standard), (Color Accent) or (Color Swap). 1 FUNC. Menu Frame Rate). * (Recording Pixels/ See Menus and Settings (p. 22). *Default setting. zUse the or button to select recording pixels/frame rate settings and press the FUNC./SET button. Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion.
Shooting Panoramic Images (Stitch Assist) Shooting Mode Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. The overlapping seams of several adjacent images can be joined into a single panoramic image. 1 (Rec.) Menu [Stitch Assist]. See Menus and Settings (p. 23). 2 Select a shooting direction zYou can select from the following two shooting directions. Left to right horizontally Right to left horizontally 42 .
3 Shoot the first image in the sequence. zThe exposure and white balance are set and locked with the first image. 4 Compose the second image so that it overlaps a portion of the first and shoot. zYou can retake a shot by pressing the or button and returning to the previously recorded image screen. zMinor discrepancies in the overlapping portions can be corrected when the images are stitched together. Repeat the procedure for additional images. zA sequence may contain up to 26 images.
Switching between Focusing Modes Shooting Mode Select from among the following three focusing methods. You can have the camera automatically detect Face the position of a face and use this data to set the Detect focus and exposure* while shooting. *Only in evaluative metering mode (p. 47). (No frame) 1 On The camera detects the subject and highlights the AF frames, from 9 available points, that it will use to determine the focus. Off The camera focuses using the center AF frame.
z In [Face Detect] mode, faces may not be detected under the following circumstances. - If the faces appear small, large, dark or bright relative to the overall composition. - If the subjects are looking sideways or lying down, or their faces are partially obscured. Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) Shooting Mode Shooting It may be difficult to focus on the following types of subjects.
Shooting with the AF Lock The AF lock can be used in the , , or mode. 1 Aim the camera so that an object at the same focal distance as the main subject is centered in the AF frame. 2 Press the shutter button halfway and press the button. zThe 3 icon will display. Re-aim the camera to compose the shot as desired and shoot. To Release the AF Lock Press the button. z The AF lock is convenient because you can let go of the shutter button to compose the image.
Switching between Metering Modes Shooting Mode 1 (Rec.) Menu [Light Metering] */ / . See Menus and Settings (p. 23). *Default setting. Metering Methods Center Weighted Average Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Spot Meters the area within the spot AE point at the center of the LCD monitor. Use this setting when you want to set the exposure on the subject in the center of the monitor.
Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background. 1 FUNC. Menu * (Exposure Compensation). See Menus and Settings (p. 22). *Default setting. zUse the or button to adjust the exposure compensation and press the FUNC.
Shooting in Long Shutter Mode Shooting Mode You can set the shutter speed to a slow setting to make dark subjects appear brighter. 1 (Rec.) Menu [Long Shutter] [On]. See Menus and Settings (p. 23). FUNC. Menu * (Exposure Compensation) . See Menus and Settings (p. 22). *Default setting. 3 Use the speed or . Shooting 2 button to select the shutter zThe higher the value, the brighter the image and the lower the value, the darker the image.
The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. A certain amount of processing time, however, may be required before the next image can be shot. z Use the LCD monitor to confirm that the image was recorded at the desired brightness.
Adjusting the Tone (White Balance) Shooting Mode Normally, the (Auto) white balance setting selects an optimal white balance. When the setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. 1 FUNC. Menu * (Auto). See Menus and Settings (p. 22). *Default setting. zUse the or button to select a white balance setting and press the FUNC./SET button.
Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading for the following situations that are difficult for the (Auto) setting to detect correctly.
Shooting z You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). z Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed.
Shooting in a My Colors Mode Shooting Mode You can change the look and feel of the pictures you take. My Colors Settings My Colors Off Records normally with this setting. Vivid Neutral Sepia B/W Positive Film Emphasizes the contrast and color saturation to record bold colors. Tones down the contrast and color saturation to record neutral hues. Records in sepia tones. Records in black and white.
1 FUNC. Menu * (My Colors Off). See Menus and Settings (p. 22). *Default setting. zUse the or button to select a My Colors mode. zIn See Setting the Camera to a Custom Color Mode (p. 55). zWhen not in Press the FUNC./SET button to return to the shooting screen. 2 Shoot. Setting the Camera to a Custom Color Mode 1 FUNC. Menu Colors Off) * (My (Cus- tom Color) .
Changing Colors Shooting Mode You can shoot images with the original colors transformed. This can be performed on movies as well as still images, allowing you to enjoy photographing with image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color. Before you try to photograph important subjects, we highly recommend that you shoot trial images and check the results. If you set [Save Original] (p.
2 . zThe Color Accent mode will take effect. 3 Hold down . zThe camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color). 4 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button. 5 Press shoot. Shooting zOnly one color can be specified. zYou can use the or button to specify the range of colors that are retained.
Shooting in the Color Swap Mode Original Color (Before Swapping) 1 Desired Color (After Swapping) Stills: FUNC. Menu Swap). Movies: FUNC. Menu (Color Swap). *(Auto) * (Standard) See Menus and Settings (p. 22). *Default setting. Stills 2 . zThe Color Swap mode will take effect. 3 Hold down . zThe camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color).
4 Aim the camera so that the original color appears at the center of the LCD monitor and press the button. zOnly one color can be specified. zYou can use the or button to specify the range of colors that are swapped. • -5: Only takes the color that you want to swap • +5: Also takes colors close to the one that you want to swap 5 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button. zOnly one color can be specified. Press shoot.
Changing the Save Method for the Original Image When shooting still images in the Color Accent or Color Swap mode, you can set whether or not to save the original image as well as the transformed one. 1 (Rec.) Menu [On]/[Off]*. [Save Original] See Menus and Settings (p. 23). *Default setting. zIf [On] is selected, the two images will be numbered consecutively with the altered image following the original.
Adjusting the ISO Speed Shooting Mode Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area. 1 FUNC. Menu * (ISO Speed). See Menus and Settings (p. 22). *Default setting. Shooting zUse the or button to select an ISO speed and press the FUNC./ SET button. zSelecting [AUTO] sets the optimal ISO speed according to the light level when shooting.
Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor. 1 (Set up) Menu [Off]. [Auto Rotate] [On]*/ See Menus and Settings (p. 23). *Default setting.
Creating an Image Destination (Folder) Shooting Mode You can create a new folder at any time and the recorded images will be automatically saved to that folder. Creates a new folder the next time you shoot Create New Folder images. To create an additional folder, insert another check mark. Auto Create You can also specify a date and time if you wish to create a new folder using a shooting time after the specified date and time (p. 27). Creates a folder the next time you shoot.
Setting the Day or Time for Automatic Folder Creation 1 (Set up) Menu [Create Folder]. See Menus and Settings (p. 23). 2 Select a day for the [Auto Create] option and a time in the [Time] option . z displays when the specified time arrives. The symbol will cease to display after the new folder is created. Up to 2000 images can be saved into one folder. A new folder will automatically be created when you record more than that number even if you are not creating new folders.
Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. 1 (Set up) Menu [File Numbering] tinuous]*/[Auto Reset]. [Con- See Menus and Settings (p. 23). *Default setting. A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing Continuous folders or memory cards.
File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder.
Playback/Erasing Please also see the Basic Camera User Guide (p. 20). Magnifying Images 1 Press the button. zWhen the button is pressed, the image can be magnified up to 10 times. Pressing the button zooms out from the image. zPressing the or button moves to the previous or next image in the magnified state. Press and change the position of the displayed portion with the , , or button. zThe icon will display and the display will change to the display position change mode. Pressing the FUNC.
Viewing Images in Sets of Nine (Index Playback) 1 Hold down . zUp to nine images can be viewed at once. zUse the , , or button to change the image selection. Selected Image Movie To Return to Single Image Playback Hold down the FUNC./SET button.
Organizing Images by Category (My Category) You can organize images into prepared categories (People, Scenery, Events, Category 1-3, To Do). At the category level, you can perform the following. zImage searches (p. 70) zSlide Show (p. 82) zProtect (p. 87) zErase (p. 89) zConfigure print settings (p. 91) 1 (Play) Menu . See Menus and Settings (p. 23). zIn Playback mode, you can press the button to display the screen in Step 2 directly.
Jumping to Images When you have many images recorded onto a memory card, it is handy to use the six search keys below to jump over images to find the object of your search. Shot Date My Category 1 Jumps to the first image of each shooting date. Jumps to the first image in each category. Folder Jumps to the first image in each folder. Movie Jumps to a movie. By 10 images Jumps over 10 images at a time. By 100 images Jumps over 100 images at a time.
z / / / : use the or Select the search key button to select date, category, folder or movie for playback and press the FUNC./SET button. - The camera will switch to defined playback mode and play back only images corresponding to the search key. - Press and hold the MENU button to cancel defined playback mode. To Return to Single Image Playback Press the MENU button. Playback/Erasing z The defined playback mode will be canceled under the following circumstances.
Viewing Movies Movies cannot be played in the index playback mode. 1 Display a movie and press zImages with a 2 Select . icon are movies. (Play) and press . zThe movie will pause if you press Movie Control Panel the FUNC./SET button during Volume Level playback. It will resume when you (Adjust with the press the button again. or button) zWhen playback ends, the movie stops at the last frame displayed. Press the FUNC./SET button to display the movie control panel.
Operating the Movie Control Panel Ends playback and returns to single image playback Print (An icon will display when a printer is connected. See the Direct Print User Guide for details.) Play Slow Motion Playback (You can use the button to slow down or the button to speed up playback.) Displays the first frame Previous Frame (Rewinds if the FUNC./SET button is held down) Next Frame (Fast Forwards if the FUNC./SET button is held down) Displays the last frame Edit (Switches to movie editing mode) (p.
Editing Movies You can delete portions of recorded movies. Protected movies and movies 1 second or less in duration cannot be edited. 1 Select and press (Edit) in the movie control panel . zThe movie editing panel and the movie editing bar will display. Movie Editing Panel Movie Editing Bar 2 Use the or button to select Beginning) or (Cut End) and the button to specify the cut point( ). (Cut or zTo check a temporarily edited movie, select (Play) and press the FUNC./SET button.
4 Select [New File] or [Overwrite] and press . z[New File] saves the edited movie under a new file name. The pre-edit data is left unchanged. Note, if you press the FUNC./SET button while saving the movie, saving is canceled. z[Overwrite] saves the edited movie with its original name. The pre-edit data is lost. zWhen there is not enough space left on the memory card, only [Overwrite] can be selected. It may take approximately 3 minutes to save an edited movie.
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. Original 1 90° 270° (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image to rotate and press to rotate it. zCycle through the 90°/270°/original orientations with each press of the FUNC./SET button. zThis also can be set in the index playback mode.
Playback with Transition Effects You can select the transition effect displayed when switching between images. Standard display. The displayed image darkens and the next image gradually brightens until it is displayed. Press the left and the right. 1 button to have the previous image display from the button to have the next image display from the (Play) Menu / */ . See Menus and Settings (p. 23). *Default setting.
Adding Effects with the My Colors Function You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p.54. 1 Vivid Lighter Skin Tone Neutral Darker Skin Tone Sepia Vivid Blue B/W Vivid Green Positive Film Vivid Red (Play) Menu . See Menus and Settings (p. 23). 2 3 Use the or button to select an image and press . Use the or button to select the My Colors type and press .
4 Select [OK] and press . zThe newly saved image transformed with the My Colors effect will be the last one in the list. zTo continue adding effects to other images, repeat the procedures from Step 2 onward. 5 Press and select [Yes] or [No], then press . zSelecting [Yes] displays the image transformed with the My Colors effect, while [No] returns you to the Play menu. Playback/Erasing z The My Colors function will not work if there is insufficient space on the memory card.
Attaching Sound Memos to Images In playback mode (including single image playback and index playback), you can attach sound memos (up to one minute) to an image. The sound data is saved in the WAVE format. 1 (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image to attach a sound memo to and press . zThe sound memo panel will display. 3 Select (Record) and press . zThe elapsed time and the remaining time display. zPressing the FUNC./SET button pauses the recording.
Sound Memo Panel Exit Record Pause Play Erase Select [Erase] in the confirmation screen and press the FUNC./SET button. z You cannot attach sound memos to movies. z Sound memos for protected images cannot be erased.
Automated Playback (Slide Shows) Automated playback of memory card images. *Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 91). All Images Plays all images on a memory card in order. Plays images bearing a specified date in order. Date My Category – 1 Plays the images in the selected category in order. Folder Plays images in a specified folder in order. Movies Plays movie files only, in order. Stills Plays still images only, in order.
3 Select [Start] and press . zThe following functions are available during slide shows. - Pausing/resuming the slide show: press the FUNC./SET button - Fast forwarding/rewinding the slide show: press the or button (continue to hold the button to switch between images more rapidly) - Stopping the slide show: press the MENU button. Transition Effects You can select the transition effect used when one image is replaced by another. Standard display.
Select a date/category/folder to play back ( / / ) 1 2 Select , or and press . Use the or button to select a date/ category/folder to play back and press the button.
Selecting Images for Playback ( – ) Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. 1 Select , or and press . zOnly the icon will display at first. When you set , the icon will change to and will display. and will change in the same way when they are set. 2 Use the or button to move between images for playback and press to select or deselect them.
Adjusting the Play Time and Repeat Settings zPlay Time Sets the duration that each image displays. Choose between 3*–10 seconds, 15 seconds and 30 seconds. Displaying time can vary slightly depending on the image. * Default setting. zRepeat Sets whether the slide show stops when all the slides have been displayed or continues until stopped. 1 2 Select [Set up] and press Select [Play Time] or [Repeat] and then the desired option. zPressing the MENU button cancels the setting. 86 .
Protecting Images You can protect important images and movies from accidental erasure. You can configure the protection settings for each image singly while viewing them. Select by Date You can protect the images from a specified date. You can protect the images in a specified Select by Category category. Select by Folder You can protect the images in a specified folder. All Images You can protect all the images on a memory card. Select 1 (Play) Menu . See Menus and Settings (p. 23).
3 Select the image, date, category or folder to protect and press . z[Select] Use the or button to select an image and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can also protect images in the Protection Icon index playback mode. - Press the MENU button to complete the setting. z[Select by Date] [Select by Category] [Select by Folder] Use the or button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC.
Erasing Images You can erase images from a memory card. Select Erases images one at a time as you view them. Erases images corresponding to the selected Select by Date date. Select by Category Erases images in the selected category. Select by Folder Erases images in the selected folder. All Images Erases all images on a memory card. z Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. z Protected images cannot be erased with this function. 1 (Play) Menu .
3 Select the image, date, category or folder and press . z[Select] Use the or button to select an image and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can also erase images in the index playback mode. z[Select by Date] [Select by Category] [Select by Folder] Use the or button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting.
Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF.
1 Slide the mode switch to (Print) Menu (playback) Select a menu item . See Menus and Settings (p. 23). zProceed to Step 4 if you select [Select All Images]. 2 Select the image, date, category or folder to print and press . z[Select Images & Qty.] Selection methods differ for the Print Type settings (p. 94). - Number of Print Copies (Standard)/ (Both) Use the or button to select an image, press the FUNC./SET button and use the or button to select the number of print copies (up to 99).
z[Select by Date] [Select by Category] [Select by Folder] Use the or button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can select multiple dates, categories or folders. - Use the or button to confirm each date, category or folder image. 3 For the [Select by Date], [Select by Category] and [Select by Folder] options, press . 4 Select [OK] and press .
Setting the Print Style After setting the print style, select the image(s) to print. The following print settings can be selected. *Default setting Print Type Standard* Prints one image per page. Index Prints the selected images together at a reduced size in an index format. Both Date (On/Off*) Adds the date to the print. File No. (On/Off*) Adds the file number to the print. Clear DPOF data (On*/Off) 1 Prints the images in both the standard and index formats.
z Images with date imprints created by (Postcard Date Imprint Mode) (p. 35) will have the date imprinted regardless of the [Date] setting. Accordingly, the date may be printed twice if [Date] is set to [On]. z Dates print in the style specified in the [Date/Time] menu (p. 27). Setting the DPOF Transfer Settings You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer.
3 Use the or button to select an image to transfer and press . zPressing the FUNC./SET button again deselects the setting. zYou can also select images in the index playback mode. Transfer Selection All the Images on a Memory Card 1 (Play) Menu . See Menus and Settings (p. 23). 2 Select [Mark all] and press . zSelecting [Reset] cancels all transfer order settings. 3 Select [OK] and press . z Images are transferred in order according to the file number.
Viewing Images on a TV set You can play back images on a television with the supplied AV cable. 1 2 Turn off the Camera and the TV. Plug the ends of the AV cable into the VIDEO IN and AUDIO IN jacks on the TV. Yellow VIDEO AUDIO IN Black Connect the AV cable to the camera station's A/V OUT terminal ( ), set the mode switch to (playback) ( ), and place the camera securely into the camera station ( ) 4 5 Turn on the TV and switch it to video mode. Turn on the camera.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and startup, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes. Changing My Camera Settings 1 (My Camera) Menu Menu item. See Menus and Settings (p. 23). 2 Select the contents you wish to set. zSelect [Theme] to set all to the same settings.
Registering My Camera Settings Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ ImageBrowser) to restore the default settings to the camera. 1 Slide the mode switch to (playback) (My Camera) Menu Menu item to register.
3 Select an image or record a sound. zStart-up Image Use the or button to select the image you wish to register and press the FUNC./SET button. zStart-up, Operation, Self-timer and Shutter Sounds Select (Record) and press the FUNC./SET button. After recording, select (Register) and press the FUNC./SET button. - Recording will automatically stop when the recording time elapses. - To play it, select (Play). - To exit instead of registering, press (Exit). 4 Select [OK] and press .
Troubleshooting Camera Camera will not operate. Power is not turned on. zPress the power button (Basic Guide p. 12). Memory card slot/battery zConfirm that the memory card slot/ cover is open. battery cover is securely closed (Basic Guide p. 10). Battery charge insufficient zInsert a fully charged battery into the to operate camera camera (Basic Guide p. 8). ("Change the battery pack" message displays). Poor contact between camera and battery terminals.
LCD monitor Camera screen is black at start-up Incompatible image has zChange the start-up image in the My been selected as the Camera settings (p. 98) or use the start-up image in the My supplied software program Camera settings. ZoomBrowser EX or ImageBrowser to restore the default settings. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF). The display darkens. The image in the LCD monitor will darken in strong sunlight or bright light.
appears. This displays when using zTake note that these settings will be a memory card that has overwritten by those set by your print settings, transfer camera (pp. 82, 91). settings or slide show image selections set by other DPOF-compliant cameras. Noise displays./Subject's movements are irregular. Camera automatically zThere is no effect on the recorded lightened the image image. displayed on the LCD monitor to make it easier to see when shooting in a dark area (p. 13).
Camera will not record. SD memory card or SDHC memory card is write protected. zSlide the write protect tab of the SD memory card or SDHC memory card upward (p. 117). Image is blurred or out of focus. AF-assist Beam is set to zIn dark places where it is difficult for [Off]. the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 24). Take care not to obstruct the AF-assist Beam with your hand when used.
Subject in recorded image is too dark. Insufficient light for shooting. zSet the flash to Guide p. 16). (flash on) (Basic The subject is zSet the exposure compensation to a underexposed because positive (+) setting (p. 48). the surroundings are too zUse the spot metering function bright. (p. 47). Subject is too far away for flash to reach. zShoot within correct shooting distance of the subject when using the built-in flash (p. 124). zRaise the ISO speed and then shoot (p. 61).
White dots appear on the image. Light from the flash has zThis is a phenomenon that occurs reflected off dust particles with digital cameras and does not or insects in the air. This constitute a malfunction. is particularly noticeable when shooting using the wide angle. Eyes appear red. Light is reflected back from the eyes when the flash is used in dark areas. zSet the [Red-Eye] function to [On] and shoot (p. 32).
Shooting Movies The recording time may not display properly or shooting may stop unexpectedly. The following types of zAlthough the recording time may not memory cards are used. display properly during shooting, the movie will be recorded correctly on - Slow recording cards. the memory card. Recording time - Cards formatted on a will display properly if you format the different camera or a memory card in this camera computer. - Cards which have had (excluding slow recording memory cards) (p. 29).
Playback Cannot play back. Poor connection between zPlace the camera properly in the camera and camera camera station. station. You attempted to play back images shot with another camera or images edited with a computer. zComputer images that cannot be played back will play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF). File name was changed with a computer or file location was changed.
Reading images from memory card is slow. Memory card was formatted in another device. zUse a memory card formatted in your camera (p. 29). Battery Battery consumed quickly. Battery life exceeded if battery loses its charge quickly at normal temperature (23 °C/73 °F). zReplace the battery with a new one (Basic Guide p. 8). Battery will not charge. Battery life exceeded. • Poor connection between camera and camera station. • Poor connection between battery and battery charger.
Printing on Direct Print Compatible Printers Cannot print. Camera station and printer not properly connected. zAttach the camera station to the printer securely with the supplied cable. Printer power is off. zTurn on the printer. Incorrect print connection. zIn the (Set up) menu, select [Print Method] and select [Auto] (p. 27).
List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... zImage is being recorded to, or read from, memory card. The playback mode is starting up. No memory card zYou turned on the camera without a memory card installed, or with a memory card installed in the wrong orientation (Basic Guide, p. 10).
Naming error! zThe file name could not be created because there is a file with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached. In the Set up menu, set the File Numbering option to [Auto Reset]; alternatively, save all the images you wish to retain onto a computer, then reformat the memory card. Please note that formatting will erase all the existing images and other data. Change the battery pack.
Cannot rotate zYou attempted to rotate an image recorded in a different camera or data type, or an image edited with a computer. Incompatible WAVE format. zA sound memo cannot be added to this image since the data type of the existing sound memo is incorrect. Cannot register this image! zYou attempted to register an image recorded in a different camera or a movie as a start-up image. Cannot modify image zYou attempted to apply a My Colors effect to a movie or an image recorded in a different camera.
Cannot complete! zCould not save a part of the print, transfer or slide show settings. Unselectable image. zYou attempted to set the print settings for a non-JPEG image. Communication error zThe computer was unable to download the image due to the large amount of images (approx. 1000) stored on the memory card. Lens error, restart camera zCamera detected an error while moving the lens and cut the power automatically.
Appendix Battery Handling Battery Charge The following icon and message will display. Change the battery pack Battery charge is low. Recharge it as soon as possible it will be used for an extended period. Battery charge is insufficient to operate the camera. Replace the battery immediately. Battery Handling Precautions Appendix z Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera.
You may be able to check the charge state depending upon how the terminal cover is attached (Fig. C, D). Fig. D Fig. C Charged Battery Attach it so the is visible Spent Battery Attach it the opposite way to Fig. C. z You are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 – 30 °C (32 – 86 °F).
Handling the Memory Card SD Memory Card and SDHC Memory Card Write Protect Tab Write Protect Tab Slide the switch up. Writing/Erasing Possible Slide the switch down (you can protect the images and other data on the card) Writing/Erasing Impossible Cautions When Handling Appendix z Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. z Do not attempt to disassemble or alter the memory card.
Formatting z Please note that formatting (initializing) an memory card erases all data, including protected images. z You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.
Using the Battery Charger (Sold Separately) You can recharge the battery using Battery Charger CB-2LV/CB-2LVE (sold separately). 1 Insert the battery pack into the battery charger. Symbol Align the on the battery and battery charger and insert it correctly. 2 Battery charger model names and types vary by region. (For CB-2LV) Plug the battery charger into a power outlet. (For CB-2LVE) Attach the power cord to the battery Charge Indicator charger and plug it into a power outlet.
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation. Tripod Sockets Bracket (Comes with the flash) z The flash charge time will lengthen as the battery charge gets weaker.
z Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. z To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera’s front panel. z A tripod can be used even when the flash is attached. Batteries zCharge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints.
Camera Care and Maintenance Never use thinners, benzine, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Owing to its construction, the lens will retract slightly when wiped.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot SD40 DIGITAL ELPH/DIGITAL IXUS i7 zoom Camera Effective Pixels Image Sensor Lens Digital Zoom LCD Monitor AF System Shooting Distance (From the front of the lens) Shutter Shutter Speeds Metering System 1/2.5-inch CCD (Total number of pixels: Approx. 7.4 million) 6.3 (W) – 14.9 (T) mm (35mm film equivalent: 38 (W) – 90 (T) mm) f/3.2 (W) – f/5.4 (T) Approx. 4.0x (Up to approx.
White Balance Built-in Flash Auto, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H or Custom Auto*, On*, Off * Red-eye reduction and slow synchro available Flash Range Normal: 30 cm – 2.0 m (12 in. – 6.6 ft.) (W), 30 cm – 1.3 m (12 in. – 4.3 ft.) (T) (When ISO speed is set to AUTO.
Number of Large: 3072 x 2304 pixels Recording Pixels Medium 1: 2592 x 1944 pixels (Still Images) Medium 2: 2048 x 1536 pixels Medium 3: 1600 x 1200 pixels Small: 640 x 480 pixels Postcard: 1600 x 1200 pixels Widescreen: 3072 x 1728 pixels Number of Standard, Color Accent, Color Swap: Recording Pixels 640 x 480 pixels (30 frames/sec., 15 frames/sec.) (Movies) 320 x 240 pixels (30 frames/sec., 15 frames/sec.
Power Source Operating Temperatures Operating Humidity Dimensions (Excluding protrusions) Weight (camera body only) Other 126 Battery Pack NB-4L (Rechargeable lithium-ion battery) Compact Power Adapter CA-DC20/CA-DC20E 0 – 40 °C (32 – 104 °F) 10 – 90% 96.1 × 45.1 × 23.9 mm (3.78 × 1.78 × 0.94 in.) Approx. 105 g (3.70 oz.) Camera Station with Wireless Controller for playback (Basic Guide p. 4).
Battery Capacity (Battery Pack NB-4L (Fully charged)) Number of Images Shot (Based on the CIPA standard) Playback Time Approx. 190 images Approx. 5 hours zThe actual figures will vary according to the shooting conditions and settings. zMovie data is excluded. zAt low temperatures, the battery performance may diminish and the low battery icon may appear very rapidly. In these circumstances, the performance can be improved by warming the battery in a pocket before use.
Memory Cards and Estimated Capacities : Card included with the camera Recording Pixels Compression 16MB SDC-128M SDC-512MSH 4 40 156 7 64 251 16 134 520 5 49 190 10 87 339 21 173 671 9 76 295 16 136 529 33 269 1041 14 121 471 26 217 839 50 411 1590 56 460 1777 88 711 2747 138 1118 4317 (Postcard) 1600 x 1200 pixels 26 217 839 (Widescreen) 3072 x 1728 pixels 6 53 207 10 86 335 21 177 686 (Large) 3072 x 2304 pixels (Medium 1) 2592 x 1944 pixels (
Movie Recording Pixels Standard Frame Rate (640 x 480 pixels) Color Accent (320 x 240 pixels) Color Swap Fast Frame Rate (320 x 240 pixels) Compact (160x 120 pixels) 16MB SDC-128M SDC-512MSH 7 sec. 1 min. 4 sec. 4 min. 9 sec. 15 sec. 2 min. 7 sec. 8 min. 14 sec. 22 sec. 3 min. 1 sec. 11 min. 42 sec. 43 sec. 5 min. 55 sec. 22 min. 53 sec. 11 sec. 1 min. 32 sec. 5 min. 59 sec. 1 min. 47 sec. 14 min. 29 sec. 55 min. 57 sec. * Maximum movie clip length at : 1 min., : 3 min.
Image Data Sizes (Estimated) Compression Recording Pixels (3072 x 2304 pixels) 3045 KB 1897 KB 902 KB (2592 x 1944 pixels) 2503 KB 1395 KB 695 KB (2048 x 1536 pixels) 1602 KB 893 KB 445 KB (1600 x 1200 pixels) 1002 KB 558 KB 278 KB (640 x 480 pixels) 249 KB 150 KB 84 KB (1600 x 1200 pixels) – 558 KB – (3072 x 1728 pixels) 2304 KB 1420 KB 678 KB Frame Rate File size Recording Pixels Standard Color Accent Color Swap 130 (640 x 480 pixels) (320 x 240 pixels) 1920 KB/sec.
MultiMediaCard Interface Compatible with MultiMediaCard standards Dimensions 32.0 x 24.0 x 1.4 mm (1.3 x 0.9 x 0.06 in.) Weight Approx. 1.5 g (0.05 oz.) SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.3 x 0.9 x 0.1 in.) Weight Approx. 2 g (0.07 oz.) Battery Pack NB-4L Type Rechargeable lithium-ion battery Nominal Voltage 3.7 V DC Typical Capacity 760 mAh Cycle Life Approx.
Compact Power Adapter CA-DC20/CA-DC20E Rated Input 100 – 240 V AC (50/ 60 Hz) 100 mA (CA-DC20) 100 mA (CA-DC20E) Rated Output 5.0 V DC, 0.7 A Operating Temperatures 0 – 40 °C (32 – 104 °F) Dimensions CA-DC20 49.4 x 53.4 x 20.5 mm (1.94 x 2.10 x 0.81 in.) CA-DC20E 28.0 x 78.0 x 21.0 mm (1.10 x 3.07 x 0.83 in.) Weight CA-DC20 Approx. 92 g (3.25 oz.) CA-DC20E Approx. 75 g (2.65 oz.) (excluding power cord) Wireless Controller WL-DC200 132 Means of communication Infrared Coverage 5 meters (16 ft.
Battery Charger CB-2LV/CB-2LVE (Sold Separately) Rated Input 100 – 240 V AC (50/60 Hz) Rated Output 4.2 V DC, 0.65 A Charging Time Approx. 1 hour 30 minutes Operating Temperatures 0 – 40 °C (32 – 104 °F) Dimensions 53.0 x 86.0 x 19.5 mm (2.09 x 3.39 x 0.77 in.) Weight Approx. 60 g (2.12 oz.) (CB-2LV) Approx. 55 g (1.94 oz.) (CB-2LVE) (excluding power cord) U.S.A. and Canada only: The Lithium ion/polymer battery that powers the product is recyclable.
INDEX Numerics E 3:2 Guide .............................. 36 Erasing All Images ......................... 89 Single Images ...... Basic 3, 20 Exposure ............................... 48 A AF Frame ....................... 14, AF Lock ................................. AF-assist Beam ..................... AiAF ...................................... Auto Play (Slide Show) ......... Auto Rotate Function ............ 44 46 24 44 82 62 B Battery Battery Capacity ............. 127 Charging ...........
Formatting ................ 29, 118 Handling .......................... 117 Inserting ....................Basic 10 Menu FUNC. Menu .............. 22, 24 Menu List ........................... 24 Menus and Settings ........... 22 My Camera Menu .............. 28 Play Menu ......................... 25 Print Menu ......................... 25 Rec. Menu ......................... 24 Set up Menu ...................... 26 MENU button ..................Basic 3 Messages ............................
Wrist Strap ..................... Basic 1 Z Zoom ............................
MEMO 137
MEMO 138
MEMO 139
MEMO 140
MEMO 141
FCC Notice (Digital Camera, Model PC1205) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting.
Function Page Evaluative Center Weighted Avg. Spot Exposure Compensation Long Shutter White Balance My Colors ISO Speed Auto Rotate Grid Lines Vert. Shutter Metering Method z – – – – – – – – – – U – U (6) U (6) – –(9) – –(9) – – – – (10) – – – – –(9) – –(9) – – U – – (11) p.47 p.48 p.49 p.51 p.54 p.61 p.62 p.36 p.37 Setting available (z Default setting) U Setting can only be selected for the first image.