ENGLISH DIGITAL CAMERA Camera User Guide CDI-E180-010 XX05CHXX © 2005 CANON INC. PRINTED IN JAPAN Camera User Guide Please read the Read This First section (p. 6). Please also read the Software Starter Guide and the Direct Print User Guide.
Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software This Guide Connecting the Camera to a Computer This Guide Software Starter Guide Downloading Images to a Computer Direct Print User Guide Printer User Guide Using the Printer and Printing Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
About This Guide Conventions Used in the Text Icons appearing beside or below titles indicate the modes in which the procedure can be used. In the example below, the procedure can be used in the following modes.
Table of Contents Items marked with or procedures. are lists or charts that summarize camera functions Read This First Please Read......................................................................................... 6 Safety Precautions .............................................................................. 7 Preventing Malfunctions ................................................................... 12 Components Guide Components Guide...........................................................
Night Snapshot.............................................................................. 68 Kids&Pets...................................................................................... 68 Indoor............................................................................................ 68 Underwater.................................................................................... 68 My Colors......................................................................................
Erasing Erasing Single Images............................................................... 131 Erasing All Images .......................................................................... 132 Print Settings About Printing ................................................................................. 134 Setting the DPOF Print Settings ...................................................... 136 Image Transmission Settings (DPOF Transfer Order) Selecting Images for Transferring ........................
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Safety Precautions • Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. • The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
• To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or the closest Canon Customer Support Help Desk. • Stop operating the equipment immediately if it emits smoke or noxious fumes.
• Do not cut, damage, alter or place heavy items on the power cord. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock. • Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock. When unplugging the cable, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cable may damage or exposure the wire and insulation, creating the potential for fires or electrical shocks.
• Use the specified battery charger to charge Battery Pack NB-4L. Use of other chargers may lead to overheating, distortion of the equipment, fire or electrical shock. • Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging and when they are not in use to avoid fire and other hazards. Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.
Cautions • Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the battery pack. • Do not store the equipment in humid or dusty areas.
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.
Components Guide Front View Microphone (p. 124) Terminal Cover Flash (p. 66) Components Guide AF-assist Beam (p. 47) Red-Eye Reduction Lamp (p. 67) Self-timer Lamp (p. 78) Viewfinder Window (p. 44) Lens Wrist Strap Mount DIGITAL Terminal (p. 147) A/V OUT (Audio/Video output) Terminal (p. 155) The interface cable and AV cable cannot be connected simultaneously. How to Open the Terminal Cover Attaching the Wrist Strap* You can use this toggle to open the terminal cover or SD card slot/battery cover.
Back View LCD Monitor (p. 37) Viewfinder Window (p. 44) Speaker Tripod Socket Battery Compartment (SD card/battery compartment) SD Card Slot/ Battery Cover (pp. 21, 23) DC Coupler Terminal Cover (p. 169) Never rub or press strongly on the LCD monitor. These actions may damage it or lead to other problems.
Operation Panel Power Lamp Power Button (p. 34) Indicators (p. 16) Zoom Lever Shooting: (Wide Angle)/ (Telephoto) (p. 45) Playback: (Index) (p. 115)/ (Magnify) (p. 114) Shutter Button (p. 46) Components Guide Lights when the power is on or transmission preparations are complete when connected to a computer Mode Switch (p. 36) (Print/Share) Button (p. 17) MENU Button (p. 50) FUNC./SET (Function/Set) Button (p. 48) DISP. (Display) Button (p. 37) (Metering) Button (p. 94)/ (Jump) Button (p.
Holding the Camera Images become blurred if the camera moves when the shutter button is pressed. Hold the camera as shown below to avoid camera movement when shooting. Hold the camera firmly with both hands and let your elbows rest at your sides. Place your finger on the shutter button as you hold the camera. • Make sure that your hair or fingers do not obstruct the lens, flash, selftimer lamp, microphone or speaker. • Fix the camera onto a tripod when shooting infinity shots or in dark places.
Components Guide The following operations are accessible through one easy press of the (Print/Share) button. • Printing: See the Direct Print User Guide (supplied with the camera) • Downloading images: See p.145 of this guide and the Software Starter Guide (supplied with the camera) The indicator blinks or lights during a printer or computer connection.
Preparing the Camera Charging the Battery Pack Use the following procedures to charge the battery pack the first time you use the camera or when the “Change the battery pack” message displays. 1 Symbol Insert the battery pack into the battery charger. Align the on the battery pack and battery charger and insert it correctly. 2 Battery charger model names and types vary by region. (For CB-2LV) Plug the battery charger into a power outlet.
Battery Pack Handling Precautions Preparing the Camera • Since this is a lithium-ion battery pack, you need not completely discharge it before recharging. It can be recharged at any point. However, since the maximum number of charge cycles is approximately 300 times (battery life based on Canon’s testing standards), you are recommended to charge the battery pack after having discharged it completely to prolong battery life.
zDo not allow any metal objects such as key rings to touch the and terminals (Fig. A), as this can damage the battery pack. To carry the battery pack or store it during periods of disuse, always replace the terminal cover (Fig. B). You may be able to check the charge state when Battery Pack NB-4L is used depending upon how the terminal cover is attached (Fig. C, D). Fig. A Fig. B Fig. C Charged Battery Fig. D Spent Battery Attach it so the is visible. Attach it the opposite way to Fig. C.
Installing the Battery Pack Install Battery Pack NB-4L (supplied). 1 1 Slide the SD card slot/battery cover in the direction of the arrows. 2 Press the battery lock while inserting the battery pack all the way in until the lock clicks. 2 Preparing the Camera Please recharge the battery pack (p. 18) before you use it for the first time. Align the on the battery pack and battery chamber and insert it correctly.
• Please watch the loading slot area carefully as you insert and remove the battery pack. • Do not turn off the power or open the SD card slot/battery cover while the indicator blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card. • Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may be lost if the battery pack has been removed for more than three weeks.
Installing the SD Card Write-Protect Tab Write-Protect Tab Writing/Erasing Possible Writing/Erasing Impossible Preparing the Camera The SD card has a write-protect tab. Sliding the tab downward prevents recording of data and protects existing data (e.g. images). When recording to, erasing from or formatting the SD card, slide the tab upward. Ensure that the SD card is correctly oriented before inserting it in the camera. It may damage the camera if inserted backward by mistake.
3 2 Slide the SD card slot/battery cover closed. 1 To Remove the SD card Push the SD card with your finger or the toggle on the wrist strap until it clicks and then release it. • Please watch the loading slot area carefully as you insert and remove the SD card. • Since the camera is writing, reading, erasing or transmitting data to or from the SD card when the indicator blinks green, never perform the following actions during this time. It could corrupt the image data.
Formatting SD Cards You should always format a new SD card or one from which you wish to erase all images and other data. Power Lamp 1 Press the power button until the power lamp lights green. 2 Press the MENU button. 3 Use the button to select the (Set up) menu. 4 Use the or button to select [Format] and press the FUNC./SET button. The (Rec.) or displayed. Preparing the Camera Please note that formatting (initializing) an SD card erases all data, including protected images and other file types.
5 Use the button to select [OK] and press the FUNC./SET button. • To perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark. • To exit instead of formatting, select [Cancel]. • If [Low Level Format] is selected, you can stop formatting partway by pressing the FUNC./SET button. You can still use the SD card without problem even if formatting was halted partway.
SD Card Handling Precautions z SD cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. back of the card. Do not touch the terminals with your hands or metal objects. z Do not peel away the original label on the SD card or cover it with another label or sticker. z When writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using a sharp point pen (e.g.
Setting the Date and Time The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium-ion date/time battery charge is low. Start from Step 5 to set the date and time. Power Lamp 28 1 Press the power button until the power lamp lights green. 2 Press the MENU button. 3 Use the button to select the (Set up) menu. 4 Use the or button to select [Date/Time] and press the FUNC./ SET button. The (Rec.) or displayed.
Set the date and time. 6 Press the FUNC./SET button. 7 Press the MENU button. • Use the or button to select a field (year, month, day, hour, minute and date format). • Use the or button to change its value. • The date can be set up to the year 2037. The setting is complete. Preparing the Camera 5 The display will return to the shooting or playback screen. • Please note that the date and time settings may be lost if the camera battery has been removed for more than three weeks.
Using the Clock You can display the current date and time for a 5-second* interval using the following methods. This is convenient for confirming the shooting date and time. * Default setting • Holding the FUNC./SET Button While Pressing the Power Button - The start-up image will not display at startup, also the start-up sound will not play. - The Date/Time menu will display if the time has not been set. - The Display Off function will not work while the clock display is on.
Setting the Language Use this feature to select the language for the LCD monitor display. Power Lamp Press the power button until the power lamp lights green. 2 Press the MENU button. 3 Use the button to select the (Set up) menu. 4 Use the or button to select [Language] and press the FUNC./ SET button. The (Rec.) or displayed.
5 Use the , , or button to select a language and press the FUNC./SET button. 6 Press the MENU button. The display will return to the shooting or playback screen. You can display the Language menu directly by holding down the FUNC./SET button and pressing the MENU button while in single image playback or index playback mode.
Preparing the Camera 33
Basic Functions Turning the Power On Power Lamp Press the power button until the indicator lights green. The lens extends when the mode switch is set to or . To Turn the Power Off Press the power button again. • If the “Card locked!” message appears right after the power is turned on, the SD card cannot record (p. 23). • The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium-ion battery charge is low.
Power Saving Function This camera is equipped with a power saving function. When this function is turned on and it activates, restore power by pressing the power button. Shooting Mode: * This time can be changed (p. 56). Playback Mode: Powers down approximately 5 minutes after the last control is accessed on the camera. Connected to a Printer (sold separately): Powers down approximately 5 minutes after the last control is accessed on the camera.
Switching Between Shooting/Playback The mode switch is used to select Shooting and Playback modes. To Shoot Still Images (Shooting Mode) Slide the mode switch to . To Shoot Movies (Movie Mode) Slide the mode switch to . To Play Back Images (Playback Mode) Slide the mode switch to . • The lens retracts approximately 1 minute after changing the mode switch position from or to . • When a printer is connected, images can be printed (see the Direct Print User Guide).
Using the LCD Monitor The LCD monitor can be used to compose images while shooting, adjust menu settings and play back recorded images. Icons showing the camera’s status and setting contents appear on the LCD monitor. Shooting Mode ( , ) (p. 41) Press the DISP. button. The display mode changes as follows with each press. Basic Functions The image in the LCD monitor will darken in strong sunlight or bright light. This does not constitute a malfunction.
Playback Mode ( ) (p. 42) When the mode switch is set to , the LCD monitor will turn on. Press the DISP. button. The display mode changes as follows with each press. Standard Detailed No Information In index playback mode (p. 115), the detailed display is not available.
LCD Monitor Brightness The brightness of the LCD monitor can be adjusted to better suit the shooting conditions. When shooting in dark conditions, the camera will also automatically brighten the LCD monitor. LCD Monitor Brightness Settings Basic Functions The brightness of the LCD monitor can be changed in the following two ways. • Changing Settings Using the Set up Menu (p. 55) • Changing Settings Using the DISP. Button (Quick-bright LCD Function) Pressing the DISP.
Information Displayed on the LCD Monitor When shooting or playing back images, the shooting information, review information or replay information appears on the LCD monitor. Shooting Information (Shooting Mode) When setting the flash, continuous mode, self-timer, macro mode, infinity mode, or the metering method, the shooting information displays on the LCD monitor for approximately 6 seconds even if the LCD monitor is set to Standard (No Information) or Off.
* Spot AE Point Frame ( * AF Frame (p. 89) Mode) Metering Mode (p. 94) Shooting Method (pp. 75, 78) * Low Battery (p. 22) Macro/Infinity (p. 71) Flash (p. 66) Auto Rotate (p. 110) (Red)* Movie Recording (p. 81) Basic Functions Zoom Magnification* (p. 45) * AE Lock (p. 92) * FE Lock (p. 93) * * * * Shooting Mode (pp. 68, 81) Exposure Compensation (p. 95) Long Shutter Mode (p. 96) White Balance (p. 98) ISO Speed (p. 109) Photo Effect (p. 101) My Colors (p. 102) * AF Lock (p.
Playback Information–Standard (Playback Mode) File Number Compression (Still Images) (p. 64) Resolution (Still Images) (p. 64) Movie (p. 118) Protection Status (p. 130) Shooting Date/Time Total number of images Displayed image number WAVE Format Sound (p. 125) Playback Information–Detailed (Playback Mode) Histogram Shooting Mode (pp. 68, 81) Exposure Compensation (p. 95) White Balance (p. 98) Long Shutter Mode (p. 96) Photo Effect (p. 101) 42 My Colors (p. 102) Flash (p. 66) ISO Speed (p.
The following information may also be displayed with some images. A sound file in a format other than the WAVE format is attached or the file format is not recognized. JPEG image not conforming to Design rule for Camera File System Standards RAW image Please note that image information recorded by this camera may not display correctly on other cameras and image information recorded by other cameras may not display correctly on this camera.
Using the Viewfinder The viewfinder can be used to conserve power by turning the LCD monitor off (p. 37) while shooting. Shows the center of the image Viewfinder Image Seen in Viewfinder vs. Recorded Image Usually the recorded image contains more of the scene than is seen in the viewfinder. Confirm the actual image size with the LCD monitor. The image recorded may differ from what is seen in the viewfinder due to the distance between the viewfinder and lens (especially with close-ups).
Using the Zoom The zoom can be adjusted from 35 mm to 105 mm in 35mm film equivalent terms. Telephoto/Wide Angle Press the zoom lever toward . • Press the zoom lever toward in (telephoto). • Press the zoom lever toward out (wide angle). or to zoom to zoom Basic Functions 1 Digital Zoom When the LCD monitor is on, you can shoot with a combined optical and digital zoom up to approximately 12x (p. 74). Images become coarser the more they are digitally zoomed.
Pressing the Shutter Button The shutter button features a two-stage action. 1. Pressing Halfway Automatically sets such settings as the exposure and focus. Press the shutter button halfway. z Beep • Focused: 2 beeps • Focusing difficulty: 1 beep Indicators z Indicator Status Upper Indicator • Green: Metering complete • Orange: Flash will fire • Blinking Orange: Camera shake warning/ Insufficient exposure Lower Indicator • Yellow: Macro mode/Infinity mode/AF lock (p.
2. Pressing Fully Pressing the shutter button down fully activates the shutter and causes the shutter sound to play. Press the shutter button fully. While the image is being recorded to the SD card, the indicator blinks green. AF-assist Beam • The AF-assist Beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, e.g., dark conditions. • The AF-assist Beam can be turned off (p. 53).
Selecting Menus and Settings Menus are used to adjust shooting and playback settings, as well as other camera settings like the Date/Time and sounds. Menus are displayed by pressing the FUNC./SET or MENU button according to the circumstances. Use the following procedures to select settings. Some menu options may not be selectable in certain shooting modes (p. 192). Selecting Menu Settings with the FUNC./SET Button (Shooting Mode only) Slide the mode switch to (Shooting) or (Movie). 1 2 Press the FUNC.
FUNC. Menu ) Shooting Mode (p. 68) ( ) Photo Effect (p. 101) ( ) Movie Mode (p. 81) ( ) My Colors (p. 102) ( ) Exposure Compensation (p. 95) ( ) Compression (p. 64) ( ) Long Shutter Mode (p. 96) ( ) Frame Rate (p. 85) ( ) White Balance (p. 98) ( ( ) ISO Speed (p. 109) ( Basic Functions ( ) Resolution (p. 64) ) Resolution (Movie) (p. 65) ( ) Items in parentheses show default settings.
Selecting Menu Settings with the MENU Button 1 Slide the mode switch to (Shooting), (Movie) or (Playback). 2 Press the MENU button. 3 In Shooting mode, the appears. In Playback mode, the appears. (Rec.) menu (Play) menu Use the or button to select the Rec./Play, Set up, or My Camera menu. • Select the menu with the / , or icon in the upper left corner of the LCD monitor selected. • The zoom lever lets you select the menu even if the / , or icon is not selected. 4 Use the item.
6 Press the MENU button. • The menu will close. • In Shooting mode, the menu can be closed by pressing the shutter button halfway.
Shooting Mode Rec. Menu Playback Mode (The menu will appear slightly different depending on the Shooting mode) Play Menu Set up Menu My Camera Menu • When the My Camera menu Shooting Mode Playback Mode / / 52 : Selects items. : Selects options. is displayed, pressing the button displays the Rec./Play menu. • When the Rec./Play menu is displayed, pressing the button displays the My Camera menu.
Menu Settings and Factory Defaults This chart shows the options and default settings for each menu. * Default setting Rec. Menu Menu Item Self-timer AF-assist Beam Digital Zoom Review Sets whether or not the camera automatically selects the AF frame or a fixed center AF frame. • On* • Off Sets the duration of the self-timer delay. • 10 seconds* • 2 seconds • Custom Timer Delay: 0-10*, 15, 20, 30 sec. Shots: 1-10 (3*) Sets the AF-assist Beam to on or off. • On* • Off Sets the digital zoom to on or off.
Menu Item Long Shutter Stitch Assist Options Sets the shutter speed to slow settings. • On • Off* Images are shot in overlapping series to create single panoramic images. • Left to right* • Right to left Reference Page p. 96 p. 86 Play Menu Menu Item Protect Rotate Sound Memo Erase all Slide Show Print Order Transfer Order 54 Options Protects images from accidental erasure. Rotates images clockwise 90° or 270° in the display. Adds sound memos to images.
Set up Menu Menu Item Volume Start-up Vol. Operation Vol. Selftimer Vol. Shutter Volume Playback Vol. LCD Brightness Reference Page Set to [On] to silence the start-up, shutter, operation and self-timer sounds all at once. See How the [Mute] Option in the (Set up) Menu and Sounds in the (My Camera) Menu Interact (p. 58). • On • Off* However, a warning will still sound when the SD card slot/battery cover is opened while an image is being written to the SD card even if the Mute function is set to [On].
Menu Item Power Saving Auto Power Down Display Off Date/Time Clock Display Format File No. Reset Auto Rotate 56 Options Sets the [Auto Power Down] and [Display Off] options. Sets whether or not the camera automatically powers down after a set period of time elapses without something being pressed. • On* • Off Sets the length of time before the LCD monitor turns off when no camera operation is performed. • 10 sec. • 20 sec. • 30 sec. • 1 min.* • 2 min. • 3 min.
Menu Item Video System Reference Page Sets the language used in menus and messages on the LCD monitor. • English* • Deutsch (German) • Ɋɭɫɫɤɢɣ (Russian) • Français (French) • Português (Portuguese) • Nederlands (Dutch) • ǼȜȜȘȞȚțȐ (Greek) • Dansk (Danish) • Polski (Polish) p.
My Camera Menu You can select the start-up image and sound, operation sound, self-timer sound and shutter sound used on this camera. These are called the My Camera settings. You can also customize the and options for each item with images recorded on the SD card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details.
Resetting Settings to Their Default Values You can reset the menu and button settings to the default settings in one operation. Power Lamp 1 Press the power button. 2 Press and hold the MENU button for more than 5 seconds. 3 Use the or button to select [OK] and press the FUNC./SET button. The mode switch can be in any position. Basic Functions To exit without resetting, select [Cancel]. • Settings cannot be reset when the camera is connected to a computer or to a printer.
60
Shooting Shooting in Auto Mode Shooting Mode In this mode, all you have to do is press the shutter button and let the camera do everything else. Slide the mode switch to (Shooting). In the FUNC. menu, select (Auto). 2 Press the FUNC./SET button. Shooting 1 The display will return to the shooting screen and will appear on the LCD monitor. 3 Aim the camera at the subject. 4 Use the zoom lever to achieve the desired composition (relative size of subject in viewfinder) (p. 45).
6 Press the shutter button fully (p. 47). • You will hear the sound of the shutter when the shutter activates. • The picture appears for two seconds on the LCD monitor. • See Functions Available in Each Shooting Mode (p. 192). • With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 62).
Changing the Review Duration The default review time is 2 seconds. You can set the review time for an image to [Off], a range between 2 and 10 seconds, or [Hold]. 1 In the (Rec.) menu, select [Review]. See Selecting Menus and Settings (p. 48). Use the or button to select the review setting and press the MENU button. Shooting 2 • With the [Off] option, the image will not automatically display. • In the [2 sec.] to [10 sec.
Changing Resolution/Compression Settings Shooting Mode You can change the compression (excluding movies) and resolution settings to suit the purpose of the image you are about to shoot. Resolution (Large) 2592 x 1944 pixels Purpose High • Print larger than A4-size prints* 210 x 297 mm (8.3 x 11.7 in.) • Print larger than Letter-size prints* 216 x 279 mm (8.5 x 11 in.) (Medium 1) 2048 x 1536 pixels • Print up to A4-size prints* 210 x 297 mm (8.3 x 11.7 in.
Movies can be shot with the following resolutions. Frame Rate Resolution frames/sec. frames/sec. frames/sec. Standard My Colors 640 x 480 pixels – 320 x 240 pixels – Fast Frame Rate 320 x 240 pixels – – Compact 160 x 120 pixels – – In the FUNC. menu, select *. * or See Selecting Menus and Settings (p. 48). Shooting 1 * The current setting is displayed. 2 Use the option. or button to select an • For movies, see page p.81.
Using the Flash Shooting Mode Use the flash according to the guidelines below. Auto The flash fires automatically as required by the light level. Auto with red-eye reduction The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires. Flash on with red-eye The flash and red-eye reduction lamp fire with each shot. reduction Flash on The flash fires with every shot. Flash off The flash will not fire.
1 Press the button to switch between flash modes. The selected flash mode appears on the LCD monitor. Shooting • When you use the flash at higher ISO speeds, the chances of white streaks appearing in the image increase the closer you approach to the subject. • Since a slow shutter speed is selected in dark places when the flash is set to Off or Slow Synchro, take care to avoid camera shake.
Selecting a Shooting Mode Shooting Mode You can take an optimal picture simply by selecting the appropriate shooting mode. Auto Leaves almost all of the settings choices up to the camera (p. 61). Manual Lets you adjust the exposure, white balance, photo effect and other settings yourself. Digital Macro You can approach as close as 3 cm (1.2 in.) (minimum focusing distance) to a subject to shoot (p. 73).
Manual Portrait Night Snapshot Kids&Pets Indoor Underwater Shooting 1 Choose a shooting mode from the FUNC. menu. • See Selecting Menus and Settings (p. 48). • You can shoot right after selecting an option. The menu displays again after the shot, allowing you to change the settings easily. 2 Press the FUNC./SET button. • The display will return to the shooting screen and the icon of the selected shooting mode will appear on the LCD monitor.
• In , , , and modes (depending on the scene being shot), the ISO speed may increase and cause noise in the image. • In mode, shoot with the subject 1 m (3.3 ft.) – infinity from the end of the lens. • • • • 70 See Functions Available in Each Shooting Mode (p. 192). Results may vary depending on the subject. In mode, you are recommended to use the LCD monitor to shoot. To shoot underwater, install the camera in All Weather Case AWDC30 (sold separately).
Shooting Close-Ups/ Infinity Shots Shooting Mode Macro Use this mode to record subjects in the range of 3 to 50 cm (1.2 in. to 1.6 ft.) from the end of the lens at the maximum wide angle setting and in the range of 30 to 50 cm (1.0 to 1.6 ft.) at the maximum telephoto setting. Infinity Use this mode to record subjects that are 3 m (9.8 ft.) or more from the end of the lens.
Image Area in Macro Mode When the zoom is set between the maximum telephoto and wideangle settings, the effective distance from the lens to the subject becomes the same as for the maximum telephoto setting. 72 Zoom Setting Distance from Lens to Subject Image Area Max. Telephoto 30 cm (1.0 ft.) 108 x 81 mm (4.3 x 3.2 in.) Max. Wide Angle 3 cm (1.2 in.) 37 x 27 mm (1.5 x 1.1 in.
Magnified Close-Up Shooting (Digital Macro) Shooting Mode Use this mode to shoot a subject in the range of 3 to 10 cm (1.2 to 3.9 in.) from the end of the lens (zoom fixed at maximum wide angle). Since this mode trims all but the image center and magnifies it with the digital zoom, you can make a subject appear even larger than in the normal macro mode. 1 In the FUNC. menu, select . 2 Press the FUNC./SET button. 3 Use the zoom lever to adjust the zoom to achieve the desired composition.
Using the Digital Zoom Shooting Mode When the LCD monitor is on, images can be zoomed to approximately 3.8x, 4.9x, 6.1x, 7.6x, 9.3x or 12x with the combined optical and digital zoom functions. The digital zoom cannot be used when the LCD monitor is turned off. 1 Press the DISP. button to turn the LCD monitor on. 2 In the (Rec.) menu, select [Digital Zoom]. See Selecting Menus and Settings (p. 48). 3 Use the or button to select [On] and press the MENU button.
Continuous Shooting Shooting Mode In this mode, the camera shoots continuously while the shutter button is held down. Recording ceases when the shutter button is released. In addition, continuous shooting (smooth continuous shooting) is possible at a consistent interval until the SD card is full under the following conditions*. * This figure reflects standard shooting criteria established by Canon. Actual figures may vary according to the subject and shooting conditions.
Postcard Date Imprint Mode Shooting Mode You can shoot images with the optimal resolution and compression for postcard size printing. • When printing standard image data to postcard size, sometimes the top, bottom and sides may not get printed. • By shooting images in the Postcard Date Imprint mode, you can check the printing area (horizontal/vertical ratio of 3:2) beforehand. In addition, the resolution locks to 1600 x 1200 pixels and the compression to the Fine setting, rendering smaller file sizes.
• The icon appears in the LCD monitor when the date stamp setting (see below) is set to Date or Date & Time. • For printing instructions, refer to the Direct Print User Guide. Embedding the Date in the Image Data You can embed the date in image data when (Postcard Date Imprint Mode) is selected. The date will be printed on your images even if it has not been set with a computer or printer. 1 In the (Rec.) menu, select [Date Stamp]. Shooting • Ensure that the camera’s date/time is set beforehand (p.
Using the Self-timer Shooting Mode With this function, images are shot 10 or 2 seconds after the shutter button is pressed. This is useful when you want to take a memorable photo with everyone including yourself in the picture. In addition, you can set the delay time and number of shots (Custom Timer). 1 Press the . button to display or • When the shutter button is pressed fully, the self-timer will activate and the selftimer lamp will blink.
Changing to a 10 or 2 second delay. 2 Use the or button. or button to select and press the MENU Shooting • The display will return to the shooting screen. • When is selected, the self-timer sounds and the blinking gets faster 2 seconds before the shutter activates. • When is selected, the self-timer sounds at the same time as the shutter button is pressed. The shutter activates in 2 seconds. Changing the delay time and number of shots (Custom Timer). 2 Use the or button to select and press the FUNC.
4 Press the FUNC./SET button. 5 Press the MENU button. The setting is now set. • The display will return to the shooting screen. • If the number of shots is set to 2 or more, the exposure and white balance settings are locked after the first shot. Shooting will cease if the SD card becomes full. • Between shots the self-timer lamp will flash and the self-timer sound will play as follows. If multiple shots are selected, the self-timer sound will play for the first shot only.
Shooting a Movie The following four movie modes are available. Standard Use this mode to record fast moving subjects, such as in sports photography. Fast • Resolution: (320 x 240) Frame Rate • Frame Rate: (60 frames/sec.) • Max. Clip Length: 1 minute Compact Shooting You can select the resolution and frame rate* yourself and record until the SD card is full (when a super high-speed SD card is used, such as the recommended SDC-512MSH model). The digital zoom can be used while shooting in this mode.
2 In the FUNC. menu, select a movie mode. • See Selecting Menus and Settings (p. 48). • You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. • In or mode, you can change the resolution (p. 65) and frame rate (p. 85). 82 3 Press the FUNC./SET button. 4 Press the shutter button halfway. 5 Press the shutter button fully.
6 Press the shutter button fully again to stop recording. • The recording time may not display properly during shooting or filming may stop unexpectedly with the following types of SD cards. - Slow recording cards - Cards formatted on a different camera or a computer - Cards which have had images recorded and erased repeatedly Although the recording time may not display properly during shooting, the movie will be recorded correctly on the SD card.
•See Functions Available in Each Shooting Mode (p. 192). • Sound is recorded monaurally. • There is no shutter sound in movie mode. • You can lock the exposure (AE lock) setting or adjust the exposure compensation setting before shooting. Press the button to lock the exposure setting (AE lock) and display the exposure compensation bar in the LCD monitor. Use the or button to adjust the setting.
Changing the Frame Rate In the (Standard) or (My Colors) mode, you can select between one of two frame rates (number of frames recorded each second): (30 frames/sec.) or (15 frames/sec.). 1 In the FUNC. menu, select *. • See Selecting Menus and Settings (p. 48). * The current setting is displayed. Use the or or . button to select Shooting 2 You can shoot the image right after selecting settings by pressing the shutter button.
Shooting Panoramic Images (Stitch Assist) Shooting Mode Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. The overlapping seams of several adjacent images can be joined into a single panoramic image. To merge the images on a computer, use PhotoStitch, one of the supplied programs. Framing a Subject The PhotoStitch program detects the overlapping portions of adjoining images and merges them.
Shooting Images can be shot in two sequences in Stitch Assist mode. Left to right horizontally Right to left horizontally 1 In the FUNC. menu, select . 2 In the (Rec.) menu, select [Stitch Assist] and press the FUNC./SET button. • See Selecting Menus and Settings (p. 48). Shooting See Selecting Menus and Settings (p. 48). 3 Use the or button to select a shooting direction and press the FUNC./SET button.
4 Shoot the first frame in the sequence. The exposure and white balance are set and locked with the first image. 5 Compose the second image so that it overlaps a portion of the first and shoot. • Use the or button to check or retake the recorded images. • Minor discrepancies in the overlapping portions can be corrected when the images are stitched together. 6 Repeat the procedure for additional images. A sequence may contain up to 26 images. 7 Press the MENU button after the last shot.
See Functions Available in Each Shooting Mode (p. 192). Switching between Focusing Modes Shooting Mode Although the autofocus function is preset to the AiAF setting (9 AF frames), you can set it to the center AF frame. When [AiAF] is set to [On], the AF frame does not appear. When [AiAF] is set to [Off], however, the AF frame will appear. On The camera detects the subject and highlights the AF frames, from 9 available points, that it will use to determine the focus.
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) Shooting Mode It may be difficult to focus on the following types of subjects. Use the focus lock or AF lock in these situations. • Subjects with extremely low contrast to the surroundings • Scenes with a mixture of near and far subjects.
Shooting with the AF Lock The AF lock can be used in the , , or mode. Press the DISP. button to turn the LCD monitor on. 2 Aim the camera so that an object at the same focal distance as the main subject is centered in the AF frame. 3 Press the shutter button halfway (two beeps will play) and press the / button. Shooting 1 • The focal distance to the object is locked. • The icon will display and the lower indicator beside the viewfinder will light yellow.
Locking the Exposure Setting (AE Lock) Shooting Mode You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. You must set the flash to fires. . The AE lock cannot be set if the flash 1 Press the DISP. button to turn the LCD monitor on. 2 Focus on the part of the subject on which you wish to lock the exposure setting. 3 Press the shutter button halfway (two beeps will play) and press the button.
Locking the Flash Exposure Setting (FE Lock) Shooting Mode You can lock the flash exposure so that the exposure settings are correctly set for a particular portion of your subject. 1 Press the DISP. button to turn the LCD monitor on. 2 Press the to . 3 Focus on the part of the subject on which you wish to lock the flash exposure setting. 4 Press the shutter button halfway (two beeps will play) and press the button.
To Release the FE Lock Press the button. The FE lock may be released by pressing the zoom lever, MENU button or button, or by changing the white balance, ISO speed, photo effect or the shooting mode, or by turning the LCD monitor off. Switching between Metering Modes Shooting Mode You can switch between metering modes to shoot. Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering.
Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. 1 In the FUNC. menu, select *. See Selecting Menus and Settings (p. 48). 2 Shooting * The current setting is displayed. Use the or button to adjust the exposure compensation. • The settings can be adjusted in 1/3 stops in the range -2 to +2.
Shooting in Long Shutter Mode Shooting Mode You can set the shutter speed to a slow setting to make dark subjects appear brighter. 1 In the (Rec.) menu, select [Long Shutter]. See Selecting Menus and Settings (p. 48). 2 Use the or button to select [On] and press the MENU button. The display will return to the shooting screen. 3 In the FUNC. menu, select press the MENU button. * and See Selecting Menus and Settings (p. 48). * The current setting is displayed. 4 Use the or shutter speed.
5 Press the FUNC./SET button. The display will return to the shooting screen. To Cancel the Long Shutter mode While [Long Shutter] is displayed in the FUNC. menu, press the MENU button. Shooting The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images.
Adjusting the Tone (White Balance) Shooting Mode When the white balance mode is set to match the light source, the camera reproduces colors more accurately. Combinations of setting contents and light source are as follows.
3 Press the FUNC./SET button. The display will return to the shooting screen. This setting cannot be adjusted when the photo effects are selected. (Sepia) or (B/W) Setting a Custom White Balance 1 In the FUNC. menu, select Shooting You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color.
3 Aim the camera at the white paper, cloth or gray card and press the MENU button. • If you are using the LCD monitor, compose the image so the paper or cloth completely fills the center frame in the display, or the entire viewfinder, before pressing the MENU button. The camera reads the white balance data when you press the MENU button. • You can shoot right after selecting an option. The menu displays again after the shot, allowing you to change the settings easily. 4 Press the FUNC./SET button.
Changing the Photo Effect Shooting Mode By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. Effect Off Vivid Emphasizes the contrast and color saturation to record bold colors. Tones down the contrast and color saturation to record neutral hues. Low Sharpening Records subjects with softened outlines. Sepia B/W Records in sepia tones. Shooting Neutral Records normally with this setting. Records in black and white. 1 In the FUNC. menu, select *.
Shooting in a My Colors Mode Shooting Mode A My Colors mode easily changes the colors in an image when it is shot, allowing you to alter the balance between red, green and blue, transform pale or tanned skin or change a color specified in the LCD monitor into a different color. Since they work with both stills and movies, these modes let you enjoy producing various image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color.
1 Slide the mode switch to . or 2 In the FUNC. menu, select . or See Selecting Menus and Settings (p. 48). Use the button to select *. 4 Use the or button to select a My Colors mode. * The current setting will display. • Modes Press the FUNC./SET button. The display will return to the shooting screen and you can shoot. • Modes : See Shooting in the Color Accent Mode (p. 105). : See Shooting in the Color Swap Mode (p. 106). : See Shooting in the Custom Color Mode (p. 108).
Changing the Save Method for the Original Image When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded. 1 In the (Rec.) menu, select [Save Original]. See Selecting Menus and Settings (p. 48). 2 Use the or button to select [On] or [Off], then press the MENU button. • The display will return to the shooting screen. • Select [On] to record the original image too or [Off] to not record it.
Shooting in the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white. 1 In the FUNC. menu, select . • See Shooting in a My Colors Mode (p. 102). • All colors but the previously specified one display in black and white. Press the MENU button. 3 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button.
Shooting in the Color Swap Mode This mode allows you to transform a color specified in the LCD monitor into another. Desired Color (After Swapping) Original Color (Before Swapping) 1 In the FUNC. menu, select . 2 Press the MENU button. 3 Aim the camera so that the original color appears at the center of the LCD monitor and press the button. See Shooting in a My Colors Mode (p. 102).
4 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button. • Only one color can be specified. • You can shoot immediately after this step. The screen will reappear after the shot allowing you to change the settings and shoot again. Press the MENU button. 6 Press the FUNC./SET button. The color input mode will no longer be in effect. Shooting 5 The display will return to the shooting screen.
Shooting in the Custom Color Mode This mode allows you to adjust the color balance for red, green, blue and skin tones. 1 In the FUNC. menu, select press the MENU button. and See Shooting in a My Colors Mode (p. 102). 2 Use the or button to select [Red], [Green], [Blue] or [Skin Tone] and the or button to adjust the color balance. The display will alternate between the original image and the custom color image. Select a color. Adjust the color balance. 108 3 Press the MENU button.
Adjusting the ISO Speed Shooting Mode Raise the ISO speed when you wish to reduce the effects of camera shake, turn the flash off when shooting in a dark area, or use a fast shutter speed. 1 In the FUNC. menu, select *. See Selecting Menus and Settings (p. 48). * The current setting is displayed. Use the speed. or button to select a Shooting 2 You can shoot right after selecting an option. The menu displays again after the shot, allowing you to change the settings easily. 3 Press the FUNC.
Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct viewing orientation in the display. You can set this function on/off. 1 In the (Set up) menu, select [Auto Rotate]. See Selecting Menus and Settings (p. 48). 2 Use the or button to select [On] and press the MENU button. • The display will return to the shooting screen.
Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. The file number is reset to the start (100-0001) each time a new SD card is inserted. New images recorded on SD cards with existing files are assigned the next available number. Off The file number of the last image to be shot is memorized so that images recorded to a new SD card start from the next number. 1 In the (Set up) menu, select [File No. Reset].
About File Numbers and Folder Numbers Images are assigned file numbers from 0001 to 9900, and folders are assigned folder numbers from 100 to 998 (Folder numbers cannot contain 99 in the last two digits). Folder numbers cannot contain 99 in the last two digits Folder File Capacity Each folder usually contains up to 100 images. However, since images shot in continuous shooting and Stitch Assist mode are always saved into the same folder, a folder may contain more than 100 images.
Playback Displaying Images Individually 1 Slide the mode switch to (Playback). The last recorded image will appear in the display (single image playback). Use the or button to move between the images. Playback 2 Use the button to move to the previous image and the button to move the next image. Holding the button down advances the images more rapidly, but the images will not appear as clearly.
Magnifying Images 1 Press the zoom lever toward . 2 Use the , , or button to move around the image. 3 Press the FUNC./SET button. will appear on the monitor. You can press the zoom lever toward to display the image at a magnification of up to 10x. Approximate Location of the Magnified Area 4 • The image advance mode will become active and will display in the LCD monitor.
Viewing Images in Sets of Nine (Index Playback) 1 Press the zoom lever toward . 2 Use the , , or button to change the image selection. Up to nine images can be viewed at once in index playback.
Switching between Sets of Nine Images 1 Press the zoom lever toward while in index playback. The jump bar will display. Jump Bar 2 Use the or button to move to the previous set or the next set of images. Hold the FUNC./SET button down and press the or button to jump to the first or last set. To Return to Single Image Playback Press the zoom lever toward 116 twice.
Jumping to Images When you have many images recorded onto an SD card, it is handy to use the four search keys below to jump over images to find the object of your search. • Jump 10 Images: jumps over 10 images at a time • Jump 100 Images: jumps over 100 images at a time • Jump Shot Date: jumps to the first image with the next shooting date • Jump to Movie: jumps to a movie 1 • The camera will switch to jump search mode. • The screen sample will vary slightly according to the search key.
Viewing Movies You can play movie clips shot in mode. Movies cannot be played in the index playback mode. 1 Use the movie. Images with a or button to select a icon are movies. 2 Press the FUNC./SET button. 3 Use the or button to select (Play) and press the FUNC./SET button. • The movie control panel will display. • Use the or button to adjust the sound volume. Movie Control Volume Level Panel • The movie and sound will play. • When playback ends, the movie stops at the last frame displayed.
Pausing and Resuming Play Press the FUNC./SET button during playback. The movie playback pauses. Press the FUNC./SET button again to resume. Operating the Movie Control Panel 1 Select a movie and press the FUNC./SET button (p. 118). The movie control panel will display. Use the or button to select one of the following and press the FUNC./SET button. Playback 2 : Exit (Ends playback and returns to single image playback. Pressing the MENU button also returns to single image playback.
• Movies recorded with high resolutions and frame rates may momentarily stop playing if played on slow reading SD cards. • Movies recorded at the Fast Frame Rate setting and with the video signal set to the PAL format, may play back with a frame rate lower than the recorded one when output to a TV or video. You can play every frame by using the slow motion playback. To check the images at the original frame rate, you are recommended to play the movie back on the camera's LCD monitor or on a computer.
Editing Movies Selecting (Edit) in the movie control panel enables you to cut unwanted portions at the start or end of a movie clip. Protected movies and movies less than 1 second in duration cannot be edited. Use the or button to select a movie and press the FUNC./SET button. 2 Switch to the movie editing mode. 3 Use the or button to select or and the or button to set the portion to which the cut is applied. Playback Movie Editing Panel 1 • See Operating the Movie Control Panel (p. 119).
4 Use the or button to select (Play) and press the FUNC./SET button. • A preview of the temporarily edited movie clip plays. • To stop it, press the FUNC./SET button again. 5 Use the or button to select (Save) and press the FUNC./ SET button. Selecting (Exit) cancels the edits and returns to the movie control panel display. 6 Use the or button to select [New File] or [Overwrite] and press the FUNC./SET button. • [New File] saves the edited movie under a new file name.
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. 0° (Original) 90° In the (Play) menu, select and press the FUNC./SET button. See Selecting Menus and Settings (p. 48). 2 Playback 1 270° Use the or button to select the image to be rotated and press the FUNC./SET button. Cycle through the 90°/270°/0° orientations with each press of the FUNC./SET button. 3 Press the MENU button. The display will return to the Play menu.
Attaching Sound Memos to Images In Playback mode (including single image playback and index playback, you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in the WAVE format. 1 In the (Play) menu, select and press the FUNC./SET button. See Selecting Menus and Settings (p. 48). 2 Use the or button to select an image and press the FUNC./SET button. The sound memo control panel will display. 3 Sound Memo Panel Exiting Sound Memos Press the MENU button.
Playing/Erasing Sound Memos 1 Display an image with a sound memo attached (p. 124) and press the FUNC./SET button. • Images with sound memos attached have the icons displayed on them. • The sound memo control panel will display. 2 (Play) Sound Memo Panel • The sound memo will play. Playback will stop when you press the FUNC./SET button. Press the FUNC./SET button again to resume playback. • Use the or button to adjust the sound volume.
Automated Playback (Slide Shows) Starting a Slide Show A selection of images or all the images on an SD card can be displayed oneby-one in an automated slide show. Slide show image settings are based on DPOF standards (p. 136). All Images Plays all images on the SD card in order. Slide Show 1-3 Plays the images selected for each slide show in order (p. 127). 1 In the (Play) menu, select and press the FUNC./SET button. • See Selecting Menus and Settings (p. 48). • The Slide Show menu will display.
4 Press the MENU button. The display will return to the Play menu. Pressing the MENU button again returns to the playback screen. • Movies play for their entire recorded length regardless of the time set in the slide show settings. • The power-saving function does not activate during a slide show (p. 56). Pausing/Resuming a Slide Show Press the FUNC./SET button. Playback The slide show pauses. Press the FUNC./ SET button again to restart it.
2 Use the or button to select [Program] and the or button to select [Show 1], [Show 2] or [Show 3]. A white checkmark will appear beside a show already containing images. 3 Use the or button and the or button to choose [Select] and press the FUNC./SET button. You can select all the images by choosing All Images, pressing the FUNC./SET button and selecting [OK] in the next screen. 4 5 128 Select images for the Slide Show • Use the or button to move to an image and the FUNC.
Adjusting the Play Time and Repeat Settings You can change the play time for all the images in a show and have the show repeat continuously. Play Time Repeat Sets the duration that each image displays. Choose between 3-10 seconds, 15 seconds, 30 seconds and Manual. Sets whether the slide show stops when all the slides have been displayed or continues until stopped. 1 Display the Slide Show menu. 2 Use the , , or button to select [Set up] and press the FUNC./SET button.
Protecting Images You can protect important images and movies from accidental erasure. 1 In the (Play) menu, select and press the FUNC./SET button. See Selecting Menus and Settings (p. 48). 2 Use the or button to select an image to protect and press the FUNC./SET button. • The icon appears on protected images. • You can make the selection of images easier by toggling between single image playback and index playback by pressing the zoom lever toward or . Protection Icon 3 Press the MENU button.
Erasing Erasing Single Images • Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. • Protected images cannot be erased with this function. Use the or button to select an image for deletion and press the button. 2 Use the or button to select [Erase] and press the FUNC./SET button. Erasing 1 To exit instead of erasing, select [Cancel]. This is not available during index playback.
Erasing All Images You can erase all the images saved on the SD card. • Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. • Protected images cannot be erased with this function. 1 In the (Play) menu, select and press the FUNC./SET button. See Selecting Menus and Settings (p. 48). 2 Use the or button to select [OK] and press the FUNC./SET button. To exit instead of erasing, select [Cancel].
Erasing 133
Print Settings About Printing Images shot with this camera can be printed using one of the following methods. - Connecting the camera to a direct print compatible printer*1 with a single cable and pressing the button on the camera.
This guide explains DPOF print settings. For information on how to print images, refer to the Direct Print User Guide supplied with the camera. Also, refer to your printer’s manual. Please check the System Map to confirm the compact photo printer (SELPHY CP series), card photo printer models and Bubble Jet Printers (PIXMA series/ SELPHY DS series) that can be used with this camera. For details, see the Direct Print User Guide or the users manual for your printer.
Setting the DPOF Print Settings You can select images on an SD card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service that supports DPOF, or for printing on a direct print compatible printer. See the Direct Print User Guide for instructions on how to print. Selecting Images for Printing There are two ways to select images.
3 Select images for printing. As shown below, selection methods differ according to the options chosen for the Print Type settings (p. 140). Print Type Number of Print Copies • (Standard)/ (Both) Use the or button to select an image, press the FUNC./SET button and use the or button to select the number of print copies (up to maximum of 99). • Selected for an Index Print (Index) Use the or button to move to an image and the FUNC./SET button to select or deselect it.
2 Use the , , or button to select [Mark all] and press the FUNC./SET button. All print settings for the image are canceled when you select [Reset]. 3 Use the or button to select [OK] and press the FUNC./SET button. The display returns to the Print Order (DPOF) menu. 4 Press the MENU button. The display returns to the Play menu. Press the MENU button again to go back to the playback screen. • The symbol will display on images that have had print settings set by other DPOF-compliant cameras.
• Images are printed in order from oldest to newest by the shooting date. • A maximum of 998 images can be selected per SD card. • When [Both] is selected, the number of print copies can be set, but it applies to Standard prints only. The Index setting only produces one print copy. • Print settings can also be assigned to images with the bundled software (ZoomBrowser EX/Image Browser) on a computer.
Setting the Print Style Set the print style after selecting the image to print. The following print settings can be selected. Print Type Standard Prints one image per page. Index Prints the selected images together at a reduced size in an index format. Prints the images in both the standard and index formats. Both Date Adds the date to the print. File No. Adds the file number to the print. 1 In the (Play) menu, select and press the FUNC./SET button. See Selecting Menus and Settings (p. 48).
3 Use the or button to select [Print Type], [Date] or [File No.] and the or button to select an option. Print Type Select [Standard], [Index] or [Both]. Date Select [On] or [Off]. File No. Select [On] or [Off]. Press the MENU button. The Print Order menu will reappear. Pressing the MENU button again returns to the Play menu. Press it again to go back to the playback screen. Print Settings 4 • When the print type is set to [Index], the [Date] and [File No.
Image Transmission Settings (DPOF Transfer Order) You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. The icon may display for an SD card that has had transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera.
3 • A checkmark displays on selected images. • You can press the zoom lever toward to switch to the index mode (9 images) and use the same procedures to select images. Selected for Transfer 4 Press the MENU button. The Transfer Order menu reappears. Pressing the MENU button again returns to the Play menu. Press it again to go back to the playback screen. All the Images on an SD Card 1 Image Transmission Settings (DPOF Transfer Order) Use the or button to move between images and the FUNC.
2 Use the or button to select [Mark all] and press the FUNC./SET button. All transfer settings for the image are canceled when you select [Reset]. 3 Use the or button to select [OK] and press the FUNC./SET button. The display returns to the Transfer Order (DPOF) menu. 4 Press the MENU button. The display returns to the Play menu. Press the MENU button again to go back to the playback screen. • Images are transferred in order from oldest to newest by the shooting date.
Connecting the Camera to a Computer The following methods can be used to download images recorded by the camera to a computer. Depending on the OS used, some methods may not be available. Please read Computer System Requirements (p. 146) in advance.
Connecting the Camera to a Computer Computer System Requirements Please install and use the software on a computer which meets the requirements below. Windows OS Windows 98 Second Edition (SE) Windows Me Windows 2000 Service Pack 4 Windows XP (Including Service Pack 1 and Service Pack 2) Computer Model The above OS should be pre-installed on computers with built-in USB ports.
IMPORTANT You must install the software and driver bundled on the supplied Canon Digital Camera Solution Disk onto your computer before connecting the camera to a computer. • You do not need to turn off the camera or computer power when making a USB connection. • Please refer to your computer’s manual for information regarding the location of the USB port.
• Please see How to Open the Terminal Cover (p. 13). • With the facing in the direction shown, insert the interface cable until it clicks into place. • Treat the connector area with great care while you attach and remove the interface cable. USB Port DIGITAL Terminal Interface Cable • Always grasp the connector’s sides to remove the interface cable from the camera's DIGITAL terminal. 3 4 5 Slide the mode switch to (Playback). Press the power button until the power lamp lights green.
The following window will display. Connecting the Camera to a Computer • Using the software and computer to download images: See the Software Starter Guide. • Using the Camera to Download Images (Direct Transfer Function) See Downloading Images by Direct Transfer (p. 152). Macintosh 1 Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk (first time only). Please see the Software Starter Guide for the installation procedures.
ImageBrowser Auto Start Settings – OS X (v10.2/v10.3) 1.Start Image Capture, click the [Image Capture] menu and select [Preferences]. 2.In the next menu, click the [When a camera is connected, open:] list box and select [Other]. 3.Select [CameraWindow] in the program selection window. CameraWindow is generally installed into the folder opened by selecting the [Applications], [Canon Utilities] and [CameraWindow] folders. 4.Click [OK] and then close Image Capture.
3 Perform steps 2-4 on page 147. The following window will display. • Using the Camera to Download Images (Direct Transfer Function) See Downloading Images by Direct Transfer (p. 152). Connecting the Camera to a Computer • Using the software and computer to download images: See the Software Starter Guide.
Downloading Images by Direct Transfer Use this method to download images using camera operations. Install the supplied software and adjust the computer settings before using this method for the first time (p. 147). All Images New Images DPOF Trans. Images Select & Transfer Wallpaper Transfers and saves all images to the computer. Transfers and saves to the computer only the images that have not been previously transferred.
Select & Transfer/Wallpaper Use the or button to select or , and press the button (or FUNC./SET button). 3 Use the or button to select images to download and press the button (or FUNC./SET button). • The images will download. The button will blink blue while downloading is in progress. • Images can also be selected during index playback. 4 Connecting the Camera to a Computer 2 Press the MENU button. The Direct Transfer menu will reappear.
Connecting the Camera to the Computer to Download Images Without Installing Software If you are using Windows XP or Mac OS X (v10.1.5 – v10.3), you can use the software distributed with these operating systems to download images without installing the software bundled on the Canon Digital Camera Solution Disk. This is useful for downloading images to a computer in which the software is not installed. However, please note that there are certain limitations to downloading with this method.
Viewing Images on a TV set Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable AVC-DC300. Power Lamp Turn off the Camera and the TV. (p. 34) 2 Connect the AV cable to the camera’s A/V OUT terminal. • Use the toggle on the wrist strap to open the terminal cover (p. 13) and insert the AV cable all the way.
• A TV set cannot be used in Stitch Assist mode. • Refer to pp. 50, 57 for instructions regarding the video output signal. • No image will appear on the LCD monitor when the camera is connected to a TV. • If the TV is a stereo model, you can plug the audio plug into either the left or right Audio In jack. Please refer to the TV’s manual for details. The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 57). The default setting varies between regions.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, operation, self-timer and shutter sounds. Each menu item has three choices. Example: Start-up Image Changing My Camera Settings 1 Select the (My Camera) menu. 2 Use the item. or button to select an 3 Use the option. or button to select an See Selecting Menus and Settings (p. 48).
4 Press the MENU button. • The menu will close. • In Shooting mode, the menu can be closed by pressing the shutter button halfway. • If you select (Theme) in Step 2, you can select a consistent theme for each of the My Camera settings. • The beep will not play but the start-up image will display if the [Mute] option in the (Set up) menu is set to [On] even if a setting has been selected in the My Camera menu.
Registering My Camera Settings Images recorded onto the SD card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. The following menu items can be saved to the camera. • Start-up Image • Shutter Sound • Selftimer Sound • Operation Sound • Start-up Sound Registering SD Card Images and Sounds 1 Slide the mode switch to (Playback). 2 Select the 3 Use the item.
5 Press the DISP. button. 6 Select an image or record a sound. Start-up Image Use the or button to select the image you wish to register and press the FUNC./ SET button. Start-up, Operation, Self-timer and Shutter Sounds • Use the or button to select (Record) and press the FUNC./SET button. Recording will start and automatically stop when the time is exceeded. • After recording, use the or button to select (Register Sound) and press the FUNC./SET button.
• The following cannot be registered as My Camera Settings. - Movies - Sounds recorded with the sound memo function (p. 124) • The prior setting is erased when a new My Camera setting is added. Data that can be Registered as My Camera Settings My Camera settings should conform to the data types below. However, SD card images shot with this camera can be registered as My Camera settings regardless of the below data types. (Excluding sounds recorded as a movie or with the sound memo function (p. 124).
List of Messages List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. 162 Busy... Image is being recorded to, or read from, SD card. No memory card You attempted to shoot or play back images without an SD card installed. Card locked! The SD card is write-protected.
RAW You attempted to play back a RAW image. Unidentified Image You attempted to play back an image that was recorded in a special data type (proprietary data type used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera. Cannot magnify! You attempted to magnify an image recorded in a different camera or data type, an image edited with a computer, or a movie.
Troubleshooting Problem Camera will not operate Camera will not record Cause Solution Power is not turned • Press the power button for a on moment. SD card slot/battery • Confirm that the SD card slot/ cover is open battery cover is securely closed. Insufficient battery • Insert a fully charged battery into voltage the camera. • Use the AC Adapter Kit ACK-DC10 (sold separately). Poor contact • Wipe the terminals with a clean between camera and dry cloth.
Problem Cannot play back Troubleshooting Cause Solution File name was • Set the file name or file number changed with a according to the Design rule for computer or file Camera File system standards. location was changed See About File Numbers and Folder Numbers (p. 112). Lens will not retract SD card slot/battery • First close the SD card slot/battery cover was opened cover and then turn the power off.
Problem Image is blurred or out of focus Cause Subject is out of focal range The subject is hard to focus on Subject in recorded image is too dark Subject in recorded image is too bright 166 Solution • For normal shooting conditions, stay at least 30 cm (1.0 ft.) from the subject. • In macro mode, stay in the range of 30 – 50 cm (1.0 – 1.6 ft.) from the subject (3 – 50 cm (1.2 in. – 1.6 ft.) at maximum wide angle). • In digital macro mode, stay in the range of 3 – 10 cm (1.2 – 3.9 in.
Problem Subject in recorded image is too bright Troubleshooting Cause Solution Light is shining • Change the shooting angle. directly on the subject or reflected off the subject into the camera Flash is set to on • Set the flash to off. A bar of light (red, Subject is too bright • This is a normal occurrence in purple) appears on devices containing CCDs and the LCD monitor does not constitute a malfunction.
Problem Zoom does not operate Reading images from SD card is slow Recording images to SD card takes a long time 168 Cause Solution Zoom lever was • Operate the zoom before pressed while shooting in movie mode. shooting in a movie mode other than Standard. SD card was • Use an SD card formatted in your formatted in another camera.
Appendix Using an AC Adapter Kit (Sold Separately) It is best to power the camera with AC Adapter Kit ACK-DC10 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the AC adapter. Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. 2 Open the SD card slot/battery cover, then insert the DC coupler until it is locked.
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation. Tripod Socket Bracket (Comes with the flash) • The flash charge time will lengthen as the battery charge gets weaker.
• If the battery is used in cold regions (0 °C /32 °F or lower), you are recommended to carry a spare lithium battery (CR123A or DL123). Keep the spare battery warm in your pocket until immediately before using it, and exchange it frequently with the battery in the flash. • Remove the battery from the flash and store it in a dry and cool location if you will not use it for extended periods. Leaving it in the flash could lead to the battery leaking and damaging the flash.
Camera Care and Maintenance Use the following procedures to clean the camera body, lens and LCD monitor. Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot SD400 DIGITAL ELPH/DIGITAL IXUS 50 (W): wide angle (T): telephoto Camera Effective Pixels Approx. 5.0 million 1/2.5-inch CCD (Total number of pixels: Approx. 5.3 million) Lens 5.8 (W) – 17.4 (T) mm (35mm film equivalent: 35 (W) – 105 (T) mm) f/2.8 (W) – f/4.9 (T) Digital Zoom Approx. 4.0x (Up to approx.
Sensitivity Auto*, ISO 50/100/200/400 equivalent *Camera automatically sets the optimal speed. White Balance TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom Built-in Flash Auto, auto with red-eye reduction, flash on with redeye reduction, flash on, flash off, slow synchro Flash Range Normal: 50 cm – 3.5 m (1.6 – 11.5 ft.) (W), 50 cm – 2.0 m (1.6 – 6.6 ft.) (T) Macro: 30 cm – 50 cm (1.0 – 1.6 ft.) (W/T) (When sensitivity is set to AUTO.
Number of Recording Pixels Movies: Standard, My Colors: (recording can continue until the SD card is full*1 (can record up to a maximum of 1 GB at one time)) 640 x 480 pixels (30 frames/sec., 15 frames/sec.) 320 x 240 pixels (30 frames/sec., 15 frames/sec.) Fast Frame Rate: (can record for 1 min.) *2 320 x 240 pixels (60 frames/sec.) Compact: (can record for 3 min.) *2 160 x 120 pixels (15 frames/sec.) *1 Using super high-speed SD cards (SDC-512MSH recommended).
Power Source Rechargeable lithium-ion battery (type: NB-4L) AC Adapter Kit ACK-DC10 Operating Temperature 0 – 40 °C (32 – 104 °F) Operating Humidity 10 – 90% Dimensions 86.0 x 53.0 x 20.7 mm (3.39 x 2.09 x 0.82 in.) (excluding protrusions) Thinnest section: 19.5 mm (0.77 in.) Weight (camera body only) Approx. 130 g (4.59 oz.) *1 This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers.
Battery Capacity (Battery Pack NB-4L (Fully charged)) Number of Images Shot LCD Monitor ON (Based on the CIPA standard) LCD Monitor Off Approx. 150 images Approx. 400 images Playback Time Approx. 180 minutes • The actual figures will vary according to the shooting conditions and settings. • Movie data is excluded. • At low temperatures, the battery pack performance may diminish and the low battery icon appears very rapidly.
SD Cards and Estimated Capacities Still Images (2592 x 1944 pixels) (2048 x 1536 pixels) (1600 x 1200 pixels) (640 x 480 pixels) : With card included with the camera SDC-16M SDC-128M SDC-512MSH 5 49 190 9 87 339 19 173 671 8 76 295 15 136 529 30 269 1041 13 121 471 24 217 839 46 411 1590 52 460 1777 80 711 2747 127 1118 4317 SDC-16M SDC-128M SDC-512MSH 6 sec. 1 min. 4 sec. 4 min. 9 sec. 14 sec. 2 min. 7 sec. 8 min. 14 sec.
• Maximum movie clip length at (Fast Frame Rate): 1 min., at (Compact): 3 min. The figures indicate the maximum continuous recording time. • (Large), (Medium 1), (Medium 2), (Small), , and indicate the recording resolution. • (Superfine), (Fine) and (Normal) indicate the compression setting. • , and indicate the number of frames per second.
SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.3 x 0.9 x 0.1 in.) Weight Approx. 2 g (0.07 oz.) Battery Pack NB-4L Type Rechargeable lithium-ion battery Nominal Voltage 3.7 V DC Typical Capacity 760 mAh Cycle Life Approx. 300 times Operating Temperatures 0 – 40 °C (32 – 104 °F) Dimensions 35.4 x 40.3 x 5.9 mm (1.4 x 1.6 x 0.23 in.) Weight Approx. 17 g (0.6 oz.
Photo Tips and Information Tip for Using the Self-timer (p.78) Normally the camera shakes a little when you press the shutter button. Setting the self-timer to delays the shutter release for 2 seconds and allows the camera to stop shaking, thus preventing a blurred image. Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot. How to Adjust the Exposure (p.95) This camera automatically adjusts the exposure to shoot images with the optimal brightness.
ISO Speed (p.109) The ISO speed is the numeric representation of the camera’s sensitivity to light. The higher the ISO speed, the higher the sensitivity. A high ISO speed allows you to shoot images in dark indoor or outdoor conditions without a flash and also helps prevent blurred images due to camera shake. This is convenient when shooting images in places where flash photography is prohibited.
Index A E AC Adapter Kit ACK-DC10 ....... 169 AE Lock ..................................... 92 AF Frame ................................... 46 AF Lock ..................................... 91 AF-assist Beam.......................... 47 AiAF........................................... 44 Auto Play (Slide Show)............ 126 Auto Rotate Function............... 110 Autofocus.................................. 44 AV Cable AVC-DC300 .............. 155 Erasing ....................................
Rec. Menu............................ 53 Set up Menu......................... 55 Messages................................. 162 Metering Modes......................... 94 Mode switch .............................. 36 Movie Editing................................ 121 Playback............................. 118 Shooting .............................. 81 Mute Mode ................................ 55 My Camera Menu Changing............................ 157 Registering.........................
MEMO 185
MEMO 186
MEMO 187
MEMO 188
MEMO 189
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
FCC Notice (Digital Camera, Model PC1150) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting. Function Large Medium 1 Medium 2 Resolution Small Postcard Movie Superfine Compression Fine Normal Frame Rate Flash (3) Auto Auto with Red-Eye Reduction On with Red-Eye Reduction On Off Slow Synchro Macro Mode Infinity Mode AF Lock AE Lock FE Lock Single Continuous shooting Shooting 10-sec.
Function Evaluative Metering Center-Weighted Average Method Spot Page – – – – – – – –(9) * * – – – – – –(9) –(9) –(9) * (7) – – –(9) – – – U – U U –(9) U – – p. 94 – (7) p. 95 – p. 95 p. 98 (10) p. 101 –(9) p. 109 – p. 110 Exposure Compensation Long Shutter White Balance (8) Photo Effect ISO Speed Auto Rotate * Default setting Setting available USetting can only be selected for the first image.