User Guide

182
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
z Confirm the procedures in
“ appears” (p. 180).
AF-assist Beam is set to
[Off].
z In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 51). Take care not to obstruct
the AF-assist Beam with your hand
when used.
Subject is out of focal
range.
z Shoot with the subject at the correct
focusing distance (p. 204).
z The camera may be set to an
unintended function (such as Macro).
Cancel the setting.
The subject is hard to focus
on.
z Use the focus lock or AF lock to
shoot (p. 92).
Subject in recorded image is too dark.
Insufficient light for
shooting.
z Set the flash to (Flash on) (p. 62).
The subject is
underexposed because the
surroundings are too bright.
z Set the exposure compensation to a
positive (+) setting (p. 95).
z Use the AE Lock or spot metering
functions (pp. 93, 96).
Subject is too far away for
flash to reach.
z Shoot with the subject within the
correct flash range when using the
built-in flash (p. 205).
z Raise the ISO speed and then shoot
(p. 69).
(EC237) CDI-E359_PSSD770_IXUS85IS_Guide_EN.book Page 182 Friday, January 25, 2008 10:01 AM
COPY