_ "_wer_hot SDBSO/S IXUS 95015 Before Using the Camera Shooting Playback/Erasing CallOfl Print/Transfer Settings Customizing the Camera List of Messages < 8 8 3 c Camera Q This guide explains camera features and procedures in detail. ! User E. o. CDI-E307-010 XX07XXX © 2007 CANON INC. PRINTED IN JAPAN Pi.
Shooting oAutomatically adjusts shooting settings to match particular conditions (Special Scene mode) OReduces image blur with the IS Mode oAvoid the effects of camera shake or blurry subjects when shooting by using High ISO Auto and Auto ISO Shift OFace Detect AF ideal for photographing images of people oAutomatically detects camera orientation with an Intelligent Orientation sensor Playback OOrganizes Images by Category OPlays movies with sound oAuto plays slideshows Editing ORed-Eye Correction Function
I Conventions Used in this Guide Icons appearing below titles indicate the modes in which the procedure can be used. Mode Dial • Unavailable shooting modes are shown grayed out. • [] and [] are both indicated by []. See Functions Available in Each Shooting Mode (p. 160). In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide. This mark denotes issues that may affect the camera's operation.
I Table of Contents Items marked with a_j_ are lists or charts that summarize camera functions or procedures. Please Read ...................................... I# 5 Safety Precautions ................................. Preventing Malfunctions ............................ 6 11 Using the LCD Monitor ............................. LCD Monitor Brightness ............................ Information Displayed on the LCD Monitor ............. Using the Viewfinder ..............................
Shooting Hard-to-Focus Subjects (Focus Lock. AFLock) .. 51 Locking the Exposure Setting (AE Lock) ................ 53 Locking the Flash Exposure Setting (FE Lock) ........... 54 Switching between Metering Modes ................... 55 Adjusting the Exposure Compensation ................. 56 Setting the Shutter Speed (Long Shutter Mode) .......... 57 Adjusting the Tone (White Balance) .................... 59 Shooting in a My Colors Mode ........................ 62 Changing Colors ............................
Changing MyCamera Settings ....................... Registering MyCamera Settings ..................... 113 114 Camera ........................................ When thepower isturned on....................... LCDmonitor .................................... Shooting ....................................... Shooting Movies ................................. Playback ....................................... Battery/Battery Charger ........................... TVmonitor output ................................
I Handling Precautions I_I_ I_I_':_I I Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Video Format Please set the camera's video signal format to the one used in your region before using it with a TV monitor (p. 104). Language Setting Please see the Basic Guide (p. 9) to change the language setting. OBefore using the camera, please ensure that you read the safety precautions described below and in the "Safety Precautions" section of the Basic Camera User Guide. Always ensure that the camera is operated correctly.
_,,,,__,_, ,,_ ,_,,,,,,_,,,_,,__,, __,, __,, __,, __,, ,_,__,,,__,_ _ ,, __i i ¸, __ _, _,__ __ __ ,,_,_, __,__, _,__, _,__, _,__, _,__, _,__, _,__, _,__ • Do not point the camera directly at the sun or bright sources. light • Doing so could damage the camera's CCD or your eyesight. • Store this equipment out of the reach of children and infants. • Wrist strap: Placement of the strap around the child's neck could result in asphyxiation. • Memory card: Dangerous if accidentally swallowed.
• Do not place the battery near a heat source or expose it to direct flame or heat. • The battery should not be immersed in water or sea water. • Do not attempt to disassemble, alter or apply heat to the battery. • Avoid dropping or subjecting the battery to severe impacts that could damage the casing. • Use only recommended battery and accessories. Use of battery not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
• Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. • Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera. Such items may lose data or stop working. • Be careful not to bang the camera or subject it to strong impacts or shocks when wearing or holding it by the strap.
chargers to devices such as electrical transformers for foreign travel because it may lead to malfunctions, • Do not connect compact power adapters or battery excessive heat generation, fire, electric shock or injury. • Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. • Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash.
• Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions corrupt image data. or • When moving the equipment rapidly from a cold place to a hot place, you can avoid condensation by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.
I BeforeUsingthe Camera--BasicOperations _/_IZ -- _i_%_i_ ¸ _i_ii_/_iz i_i,_i_, _i_i_. _i_ _ • The LCD monitor on or off setting is retained even after the camera power is turned off. • The LCD monitor does not shut off in the [] or _,_, mode. • The LCD monitor is set to the detailed display (Information View) in the _, _, _, [_, [] or [] mode. • The LCD monitor will not switch to detailed display in magnified display (p. 80), or index playback mode (p. 81 ). 12.
Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting Method 1 Hold the FUNC./SET Method 2 button down while turning on the power. In a shooting/playback mode, press the FUNC,/SET button for more than one second. If you hold the camera horizontally, it displays the time. If you hold it vertically, the time and date display.
LCD Monitor Brightness Settings The brightness of the LCD monitor can be changed in the following two ways. eChanging Settings Using the Set up Menu (p. 26) eChanging Function) Settings Using the DISP. Button (Quick-bright LeD You can set the LCD monitor to the brightest setting regardless of the option selected in the Set up menu by pressing the DISP. button for more than one second.* - To restore the previous brightness setting, press the DISP. button for more than one second again.
Shooting information [] Digital Tele-converter/Zoom Magnification/Safety Zoom (p. 33) ] Spot Frame ] [] AF Frame (p. 49) (Shooting Macro/Infinity mode) (Basic Guide p. 15) []l_[][]_t[][][] (ITfd_I..li_).1 ISO Speed (p. 69) 81BIE! Flash (Basic Guide p. 14) ilWMMllill Shooting [] [] Method (p. 37, Basic p. 16) I'_ Auto Rotate (p. 73) Rec. Movie Recording (p. 42) il_"lLow Battery (p. 130) AE Look (p. 53) Aperture Setting.! 3:2 Guide (p. 41) Grid Lines (p.
J_z_,z _y -: _m_i_i_m_,?_ ....... i - _i_i_¸ • :_,,••t_,y_,z _i_•?_,y_,•_ If the indicator blinks orange and the camera shake icon [] displays, it indicates there is insufficient illumination and a slow shutter speed will be selected. Shoot using the following methods. - Set the IS mode to a setting other than [Off] (p. 32). - Raise the ISO speed (p. 69). - Set the Auto tSO Shift to [Oo_ (p. 70). Select a setting other than [O] (flash off) (Basic Guide p. 14).
Detailed My Category(p. 82) Exposure Compensation(p. 56) Flash (BasicGuide p. 14) Histogram (p. 18) Macre/Infinity(Basic Guidep. 15) [_1_lm[ml[_.l[][ i mmDm[Dl l[] ShootingMode (pp. 35, 42, 47, 64, 66, Basic Guidepp. 11- 13) [ [ mlMetering Mode (p. 55) _---_ ISO Speed (p. 69) mMm[t [ RecordingPixels/Frame Rate (Movies) (p. 45) Sh_ter speed []Time Lapse (p. 46) Aperture Setting _l_My Colors (Shooting) (p. 62), [] [] Color Accent/Color Swap(p. 64) m Immlmmm lm l My Colors (Playback) (p.
Histogram Function The histogram is a graph that allows you to check the brightness of the image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 56). Sample Histograms Dark Image Balanced Image Bright Image The viewfinder (Basic Guide p.
Thiscamera isequipped withapower saving function. Thepower willshutoffinthefollowing circumstances. Press thepower button again torestore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. Press any button other than the power button or change the camera orientation to turn the LCD monitor back on.
When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings.
Use the tion time ÷ or ÷ button zone_ to select a destina- . eYou can also select an area with the touch control dial. In addition, as in Step 3, you can set the day- Time Differencefrom the HomeT me Zone __ I ,ght saving time. Use the 4_ or World], and the 4" button ÷ or to select + button [Home/ to select [] [] _@. Switching to the Destination .... l Time Zone t- ............. B, See Menus and Settings (p. 23). T (# .
Menus are used to set the shooting, playback and print settings as well as such camera settings as the date/time and electronic beep. The following menus are available. eFUNC. Menu eRec., Play, Print, Set up and My Camera Menus FUNC. Menu This menu sets many of the common shooting functions. J This example shows the FUNC. menu modedialto O, OM, in 0 SCN (Auto) mode. ® Turnthe ® Press the FUNC./SET or',==,. _) Use the 4= or @ button to select a menu item. button.
Rec., Play, Menus Print, Set up and My Camera Convenient settings for shooting, playback or printing can be set with these menus. [] (Rec.) Menu -- (Set up) Menu (My Camera) Menu Q ® (_ You can switch betweenmenus with the ÷ or 4" button when this part is selected. • This example shows the Rec. menu in O (Auto) mode. • In playback mode, the Play, Print, Set up and My Camera menus display. ® Press the MENU button. Use the 4, or 4" button to switch between menus.
See Functions Available FUNC. Menu in Each Shooting Mode (p. 160). The icons shown below are the default settings. Menu Item Page Basic p. 12 [] VtanualMode [] [] 3pecialScene Mode VlovieMode Menu Item [] Basic p. 42 --rameRate (Movie) [] Nhite Balance p. 59 ). 62 Menu _ecordingPixels(StillImage',p. 30 [] :_ecerdingPixels (Movie) p. 45 [] * Default setting Menu Item AiAF p. 45 3hooting Interval (Movie) p. 46 p. p. 56 57 Rec. p. 55 3ompression(Still Image) p.
Disp. Overlay p.41 r_es IS Mode 3ontinuous*/ShootOnly/ Panning/Off p. 32 Date Stamp 3ff*/Date/Date & Time p. 40 Set _,'_ button []*/_]lml[]/["_l[]l p. 71 []/ITI/m "1 Default setting is 3 shots. *2 They are classified according to the following categories. (People): L_, [_&'],[] or images with faces detected if [Face Detect] has been selected in [AiAF] mode. (Scenery): _, [] [] (Events): _[_, B, I_, m, I_, [] I m 5" t- Play Menu [] Menu Item m [] Print Menu Menu Item Page SlideShow 3.
Set up Menu [] Menu Item Mute Options On/Off* Volume Off/1/2"/3/4/5 * Default setting Page/Topic Setto [On] to silence all sounds except _vamingsounds.(Basic p. 10) _,djuststhe volumeof the start-up sound, operation sound,self-timer sound, shuttersound and playback sound.The volumecannot be adjusted f [Mute]is set to [On]. ................ I................................................................... .
Time Zone Home*/World Date/Time Clock Display 3-10 .1 eec./20 sec./30 secJ1 "nin./2 min./3 "nin. Format File Numbering p. 20 Basic Guide p. 9 p. 13 You can also set it to perform a low level format (p. 29). Sontinuous*/ _uto Reset p. 78 Create Folder p. 76 Create New Folder Sheck mark [On)l No check mark Creates a folder for the next shooting session. m :off) Auto Create Auto Rotate Lens Retract _ff*IDailyl Vlonday-Sundayl Monthly Language t-. p.
My Camera Menu Item Menu [] * Default setting Available Settings Theme Selectsa commonthemefor each MyCamera settings item. Start-up Image Sets the image displayedwhen the camerapower is turned on. Start-up Sound Sets the sound played when the camerapower is turned on. Page OperationSound Sets the sound played when any buttonother than ). 113 the shutterbutton is pressed. SelftimerSound Sets the sound played2 seconds beforethe shutter releasesin self-timer mode.
Youshould always format anew memory cardoronefrom which youwishtoerase allimages andother data. B, oToperform a oweveformat, use the+ button to select [Low Level Format] and the 4" or .l, button to add a check mark. • You can stop formatting a card when [Low Level Format] is selected by pressing the FUNC./ SET button. You can still use a card without problem when formatting is halted, but its data will be erased. __ _1 _j Displayswhen sound data recordedwith the soundrecorder is present (P 95).
I Shooting You can also use the touch control dial to select shooting modes or FUNC. menu opt ons. See the Basic Guide, p. 4. Approximate Values Recording 3264 x 2448 pixels for Recording Pixels Purpose.1 High Printing to about A3-size ,h, 297 x 420 mm (11.7 x 16.5 in.) Printing to about A4-size 219 x 297 mm (8.3x 11.7 in.) Printing to about Letter-size 216 x 279 mm (8.5 x 11 in.) Printing to about A5-size 148 x 210 mm (6 x 8.3 in.) Print postcard-size prints 148 x 190 mm (6 x4 in.
Printing onwide size paper (you can check _].2 3264x 1832 the composition at a 16:9 aspect ratio. (Widescreen) pixels Areas that will not be recorded appear on the LCD mon tor as a b ack border.) "1 Paper sizes vary according to region. *2 This function cannot be configured in the [] Approximate Values Compression [] Superfine [] Fine [] Normal for and [] modes.
By using the tS mode, you can reduce image blur when magnifying a distant subject or shooting in low-light situations. [] [] [] Continuous You can check the effect of the IS mode on image blur on the LCD monitor since the IS mode runs continually. This makes it easier to compose images and focus on subjects. Shoot Only IS mode is only activated when the shutter button is pressed, so subjects will be captured with reduced blur even if their movements displayed on the LCD monitor are not smooth.
You can shoot zoomed images using the combined digital and optical zooms. The focal lengths (35mm film equivalent) and characteristics are as follows. Option Focal Length Standard 35 - 560 mm Characteristics You can shoot at a maximum zoom factor of approximately 16x using a combination of the optical and digital zoom features. Off 35 - 140 mm Shoots without using the digital zoom. 1.6x 56 - 224 mm 2.
Using the Digital Zoom Using the Digital Tele-Converter Adjust the and shoot. angle of view with the zoom lever e[¥] and the zoom factor will display on the LCD monitor. OThe image may appear coarse depending upon the selected recording pixels (the [] icon and the zoom factor appear in blue).
You can shoot a subject 2 - 50 cm (0.8 in. - 1.6 ft.) from the end of the lens at the maximum wide angle setting. With the digital zoom, the image area is 7.5 x 5.5 mm (0.3 x 0.2 in.) at maximum zoom (approximately 4.0x).
You can set whether or not the red-eye reduction* lamp automatically fires with the flash. *This function them appear reduces red. (Rec,) the effect of light reflecting Menu _ [Red-Eye] back from the eyes and making _ [On]*/[Off], See Menus and Settings (p. 23). * Default setting. You can shoot with the flash at slow shutter speeds. This is handy for shootin 9 at night or under artificial Iightin 9 indoors. Please note that camera shake becomes a factor when [Slow Synchro] is set to [On].
In this mode, the camera shoots continuously button is held down. while the shutter If you use the recommended memory card*, you can shoot continuously at a set shooting interval until the memory card is full (smooth continuous shooting) (p. 143). *Recommended Memory Card Super high speed SDC-512MSH memory card (sold separately) newly formatted with low level formatting (p. 29). • This ret]ects standard shooting criteria established by Canon.
i'_E_ I It_l,_:l I_|_ Lv_ L'__ Isc.1 This mode is for recording people against a nightscape or points of light, such as holiday lighting. You can depict the point source of light in specific shapes to produce a fantastical image. Always use the flash in this mode (flash is on by default). Image shot with _ Special Effect selected. Options I m I _ I D I [] Shooting I _ I m I Tips eYou are advised to record a trial image before shooting to confirm the effect before taking the actual picture.
FUNC. Menu_ Light Effect). El* (Portrait) _ [] (Creative See Menus and Settings (p. 22). *Default Press setting. O" (n =F o (Q _i_y I¸_i _ _iiii_/iiilii_i_i>5_iii:_i _ _ _,,___i_,_2_,_i_ _ _Ii_¸_+ ;_ __iii__:_,Ji_ii_ _ _,_ _ ___ ___ ____ ___ ,_ _i_ ____ii____________i________ • The image stabilization function may not be as effective in this mode as in others. • The shape may not appear as expected if there is too much camera shake or you are shooting a moving light source.
You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor. For printing instructions, refer to the Direct Print User Guide. Embedding the Date in the Image Data You can embed the date in image data when [] (Postcard) is selected.
You can check a composition's horizontal and vertical alignment as well as a 3:2 aspect ratio print range on the LCD monitor by using a shooting guide while shooting. Grid Lines 3:2 Guide Both Displays grid lines dividing the monitor into 9 areas, allowing you to check the subject's horizontal and vertical alignment. You can check what can be printed in a composition using a 3:2 aspect ratio*. The portion that will not print displays in gray.
I_'R'_ The following [-_1 [_tT_ movie modes I'w] are available. For information on the recording pixets and frame rate in each mode, refer to Changing Recording Pixels and Frame Rates (p. 45). If you register the [] function with the _,,_ button, you can start shooting a movie simply by pressing the _,_, button regardless of the mode dial setting (p. 71).
• The recording time will vary according to the capacity of the memory card you use (p. 143). * Recording will stop after one hour of continuous recording even if the recorded data volume has not reached 4 GB. Depending on the volume and data writing speed of the memory card, recording may stop after one hour of continuous recording even if the recorded data volume has not reached 4GB. O 2-.
• Before recording, you can set the AE lock (p. 53) and exposure shift. 1. Press the ISO button. The exposure will lock (AE lock) and the exposure shift bar will appear in the LCD monitor. 2. Use the _. or _ button to adjust the exposure. Press the ISO button again to release the setting. Also, the setting will be canceled if you press the MENU button or change the white balance, My Colors or shooting mode settings. • In [] mode, the selected power saving option (p.
Changing Rates Recording Pixels and Frame You can change the recording pixels and frame rate when the movie mode is set to [] (Standard), [] (Color Accent) or [] (Color Swap). Recording Pixels and Frame Rates Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion. Recording Pixels FrameRate (frames/sec.
Changing ([] (Time 46 the Shooting Lapse)) Interval
Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. seams of several The overlapping adjacent images can be joined into a single panoramic _mage. _t_ O FUN6. I_len,,_l_*(l_lan-,al)_m/l_($titch Assist). o See Menus and Settings (p. 22). _ *Default j setting. _._ You can select from the following two shooting directions.
Compose the laps a portion second of the image so that first and shoot. it over- eYou can retake a shot by pressing the ÷ or ,I_ button and returning to the previously recorded image screen. eMinor discrepancies in the overlapping portions can be corrected when the images are stitched together. Repeat the procedure ePress the FUNCJSET for additional images, button after the last shot. eA sequence may contain up to 26 images.
J _m mDm .... s Dm .... .. ...... I The autofocus frame (AF frame) indicates the area used to set the focus. Select from among the following three focusing methods. rl LJ You can have the camera automatically detect the position of a face and use this data to set the focus and exposure* while shooting. In addition, Face the camera will meter the subject so that the face Detect is correctly illuminated when the flash fires. If a face is not detected, shooting will take place with [on].
• The following occurs when [Face Detect] is selected. - The camera displays up to three frames where it has detected a face. At this point, the frame the camera judges to be the main subject appears in white while the others appear in gray. Pressing the shutter button halfway displays up to 9 green AF frames. - If no white frame displays and all the frames appear in gray, images will be shot using the [On] option rather than [Face Detect]. - The camera may mistakenly identify non-human subjects as a face.
mmED m mDm@Dm WE WW It may be difficult to focus on the following types of subjects. eSubjects with extremely low contrast to the surroundings eScenes with a mixture of near and far subjects. eSubjects with extremely bright objects at the center of the composition eSubjects that are moving quickly eSubjects through glass: Try to shoot as close to the glass as possible to reduce the chances of light reflecting back off the glass.
To Release the AF Lock Press the _/all, button. • When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 49) makes shooting easier since the camera focuses using the center AF frame only. • The AF lock is convenient because you can let go of the shutter button to compose the image. Moreover, the AF lock is still effective after the picture is taken, allowing you to capture a second image with the same focus. • In _m mode the AF frame does not display.
You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. Turn on the LCD monitor. Focus on ;he par; of the subiec; on wh;ch you wish to lock the exposure setting. the ISO button. • The [] icon will display. _ Re:aim the camera _[ desired and press to compose the shot as the shutter button fully. To Release the AE Lock Press the IS0 button.
You can locktheflashexposure so thattheexposure settings are correctly setregardlessofthe compositionofyour subject. To Release the FE Lock Press the ISO button.
Metering Methods [] Evaluative Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering. It evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.
Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background. To Cancel the Exposure Compensation Restore the compensation value to [0]. In =,It mode, the exposure shift can be set/canceled 56 (p. 44).
You can set the shutter speed to a slow setting to make dark subjects appear brighter. FUNC • Menu_ _i]* (Exposure Compensation) See Menus and Settings (p. 22). Use the 4" or 4" button to select 0" _.. the shutter 2 speed_@. eThe higher the value, the brighter the image and the lower the value, the darker the image. • f you press the MENU button at this point, you will return to the Exposure Compensation screen.
• Use the LCD monitor to confirm that the image was recorded at the desired brightness. Please note that camera shake becomes a factor at low shutter speeds. Set IS mode to a setting other than [Off], or shoot with the camera attached to a tripod. Use of the flash may result in an over-exposed image. If this occurs, shoot with the flash set to _'i_.
lET;i [r_ i li[_ m4,TJli[.],[_a |YI,_;FJI :Fl_l,[.(4 lo.l,W m Normally, the [] (Auto) white balance setting selects an optimal white balance. When the [] setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source.
Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading for the following situations that are difficult for the [] (Auto) setting to detect correctly.
[] and the exposure compensation setting to [+0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). • Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed.
You can change the look and feel of the pictures you take. My Colors [] My Colors Off Settings Vivid Records normally with this setting. -mphasizes the contrast and color saturation to "ecord bold colors. Tonesdown the contrast and color saturation to "ecord neutral hues. [] Neutral [] Sepia Records in sepia tones. [] B/W Records in black and white. [] I_1 Positive Film Jse this option to make red, green or blue colors "nore intense like the Vivid Red, Vivid Green or _/ividBlue effects.
Setting the Camera to a Custom Color Mode This modeallowsyou to adjustthe contrast,sharpnessand saturationandthe colorbalancefor red,green,blueandskintones. FUNC. Menu_[]* Colors Off)_[] (My (Cus- tom Color) _ 0" See Menus and Settings (p. 22). *Default Use setting. the ÷ or _, button to select [Contrast], [Sharpness], [Saturation], [Red], [Green], [Blue] or [Skin Tone] and the 4. or • button to adjust the setting. eThe altered color will display. Select a category Adjust it @.
_JF __'__ U I_1 £_;_ I__'_'_ _ _"_'__ _'_i;4_ _ _ _ _;;_ _;3 _]I1_ _ _] You canshoot images withtheoriginal colors transformed. Thiscan beperformed onmovies aswetlasstillimages, allowing youto enjoy photographing withimage ormovie effects. However, depending ontheshooting conditions, theimages may appear rough oryoumaynotgettheexpected color. Before youtry tophotograph important subjects, wehighly recommend thatyou shoot trialimages andcheck theresults. Ifyouset[Save Original] (p.
. eThe Color Accent mode will take effect. @. eThe camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color). Aim the to retain monitor camera so that the color you appears at the center of the and press the ÷ button. wish LCD eOnly one color can be specified. eYou can use the 4, or _1, button to specify the range of cotors that are retained.
Shooting in the Color Swap Mode #, Original Color (Before Swapping) Stills: Swap). Desired Color (After Swapping) FUNC. Menu_r_* Movies: FUNC. (Color Swap), Menu (Manual)_l _ I_* (Standard)_ See Menus and Settings (p. 22). ( * Default setting. Stills , eThe Color Swap mode will take effect. , eThe camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color).
ii_i Aimii;e _ame_a;_ ihaiii';_-o_.inai"_i_............ appears at the center of the and press the ÷ button, LCD monitor eOnly one color can be specified. eYou can use the * or 4, button to specify the range of cotors that are swapped. • -5: Only takes the color that you want to swap • +5: Also takes colors close to the one that you want to swap Aim the camera so t'ilat thedes : appears at the center of the and press the + button, ired c'oior LCD monitor • Only one color can be specified.
Changing the Save Method for the Original Image When shooting still images in the Color Accent or Color Swap mode, you can set whether or not to save the original image as well as the transformed one. • When [Save Original] is Set to [On] - Only the transformed image displays in the LCD monitor while shooting in the Color Accent or Color Swap mode. - The transformed image is reviewed in the LCD monitor after shooting in the Color Accent or Color Swap mode.
Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area. g • The camera automatically applies noise reduction processin.q when you shoot at a high ISO speed. • If [] or [] is selected, the tSO speed automatically selected by the camera displays when you press the shutter button halfway and in the image information during playback.
If the camera shake waming icon ([]) displays while shooting, you can raise the tSO speed simply by pressing the _,,v button to record at a shutter speed that avoids the effects of camera shake. [] (Rec.) Menu_[Auto Shift] _ [On]/[Off]*. ISO See Menus and Settings (p. 23). * Default setting. Press the shutter button halfway. etf [] appears, the _,._ blink blue. Press the ter button ton lights the way. _ button button will while holding down halfway.
You can register a function that you often use with the _,,_ The following functions can be registered. Menu Item Page NotAssigned.1 _[_] +/- (Exp.) p. 56 _ White Balance CustomWhiteBalance p. 59 p. 60 [] Dg ta Te e-converter p. 33 Menu Item button. Page Disp. Overlay _'1 Rec. Movie Display Off _] Pay Sound Effect.2 p. 41 p. 42 p. 26 p. 28 "1 Default setting. *2 Sets the sound registered to _], found in the [Shutter Sound] section of the My Camera menu. [] (Rec.) o o Menu_[Set_button].
Using the _ Button • The setting value of the registered function switches each time the ,B,N button is pressed thereafter. - Aconfguraton screen w appear for the [] and [] functions. - With the [] function registered, the white balance data is captured each time you press the _,,_ button. Since a guidance frame does not show in the LCD monitor in this case, please have the white target object or cloth centered in the LCD monitor before pressing the _,,v button.
[][][]mME[][][]m[]mDWmD[][][][][][][] Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor. iset Upi Menu ........... [off]. "Default setting.
You can check whether the image is in focus right after it is recorded. eThe recorded image displays for about 2 seconds (or the interval set with the Review function p. 24). Press image O (or @)while is displayed. ,.e Recorded Image /__ The number of times the DISP but,__ ton is pressed depends upon the ,_ display settings for the LCD monitor (See below). Press the DISP. button ___ repeatedly until the screen at the .......... right appears. Orange frame contents eDisplays as follows.
Switching Changing between AF Frames/ the Display Position 75
You can create a new folder at any time and the recorded images will be automatically saved to that folder. Create New Folder Auto Create Creates [] Creates a new folder the next time you shoot images. To create an additional folder, insert another check mark. You can also specify a date and time if you wish to create a new folder using a shooting time after the specified date and time. a folder (Set up) the Menu next time _ [Create you shoot. Folder]. See Menus and Settings (p. 23).
Setting the Day or Time a time iiiii_iiiiiiiiiii/iiii in the [Time] for Automatic option_ Folder O Creation , er_ displays when the specified time arrives. The symbol will cease to display after the new folder is cre- ated. g 5" Up to 2000 images can be saved into one folder. A new folder will automatically be created when you record more than that number even if you are not creating new folders.
W The images can select File you how Number Continuous Auto reset 78 shoo{ the file are au{omatically number Reset assigned {ile numbers. You is assigned. Function A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing folders or memory cards.* *When a blank memory card is used.
File and Folder Recorded images are with 0001 and ranging numbers starting with images can be saved Numbers assigned consecutive file numbers starting up to 9999, while folders are assigned 100 and ranging up to 999. Up to 2,000 into a single folder.
I Playback/Erasing You can also use the touch control dial to select images and perform var ous operat ons. See the Basic Guide, pp. 4, 18. Press the zoom lever toward (3,. • _ will display and a magnified portion of the image will display. • Images can be magnified up to a factor of approximately 10x. of the Displayed Area Use the 4-, +, ÷ around the image.
Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward [] while in index playback and you can switch the display between sets of nine images. eUse the ÷ or ,k button to move to the previous or next set of nine images. eHold the FUNC.ISET button down and press the ÷ or ,_ button to jump to the first or last set. Jum[ To Return to Single Image Playback Press the zoom lever toward 0,.
You can organize images into prepared categories (People, Scenery, Events, Category 1-3, To Do). At the category level, you can perform the following. Olmage searches (p. 83) oSlide Show (p. 97) OProtect (p. 102) OErase (p. 105) OConfigure print settings (p. 107) When working with images (for example, compiling a slide show, erasing or printing), it is convenient to categorize images in the [To Do] category. 82.
When you have many images recorded onto a memory card, it is handy to use the six search keys below to jump over images to find the object of your search. [] Shot Date [] My Category Jumps to the first image of each shooting date. [] Folder Jumps to the first image in each folder. [] Movie Jumps to a movie. [] By 10 images [] By 100 images Jumps to the first image in each category. Jumps over 10 images at a time. Jumps over 100 images at a time.
Ol_/[]/[]/[]: usethe ÷ or 4* Select the search key button to select date, category, folder or movie for playback and press the FUNO.I$ET button. - The camera will switch to defined playback mode and display a blue frame. You can limit playback to the images corresponding to the search key. - When a category is selected by the ÷ or 4, button, the first image corresponding to each category displays in the LCD monitor.
Se'ect°'"a" an'-eThe movie will pause if you press the FUNC./SET button during playback, tt will resume when you press the button again. eWhen playback ends, the movie stops at the last frame displayed. Press the FUNC./SET button to display the movie control panel. eYou can switch between showing/ hiding the playback progress bar with the DISP. button while playing a movie.
You can delete portions of recorded movies. * When the shooting interval is 1 sec. **When the shooting interval is 2 sec. Select [] (Edit) movie control press @. Movie Editing Panel in the panel and eThe movie editing panel and the movie editing bar will display. Movie Editing Bar Use the ÷ or Beginning) button _ button or [] (Cut to specify the to select End) cut and point( [] the (Cut _ or I ). eTo check a temporarily edited movie, select [] (Play) and press the FUNC.
Depending onthemovie's filesize,itmaytakesome timeto save anedited movie. Ifthebattery runsoutofcharge partway through, edited movie clipscannot besaved. When editing movies, itisrecommended touseafullycharged battery ortheseparately soldACAdapter KitACK-DC30 (p.134). Images canberotated clockwise 90°or270 °inthedisplay. Original 90 ° 270 ° [] (,,ay) Me.u ". .... o= iiiiii]liiiiiii!iii Use rotate i[ the ÷ or and + button press _ to select to rotate an image to it.
You can select the transition effect displayed when switching between images. [] No transition effect. [] IThe displayed image darkens and the next image gradually brightens until it is displayed. IPress the ÷ button to have the previous image display from the left and the _ button to have the next image display from the r ght.
You can correct red eyes in recorded images. However, red eyes may not be automatically detected in some images or the results may not turn out as you intended. Examples: OFaces near the screen edges or faces that appear extremely small, large, dark or bright in relation to the overall image. OFaces turned to the side or at a diagonal, or faces with a portion hidden.
Select [New File] or [Overwrite] and press _. O[New File]: saves the image under /_t a new file name. The original file remains as is. The newly saved image file is saved as the last image of the photographed images. e[Overwrite]: saves the new image under the original file name. The original image is overwritten. otf you selected the [New File] image, proceed to Step 5. Press _ [No], then and select press [Yes] or _.
Adding Correction Frames You can add up to a maximum of 35 correction frames.
You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p. 62. [] IVivid []1 Lighter []lNeutral []1 Darker Skin Tone []lSep [] ia [] B_N [] Positive [] Film (Play) Skin Tone IVivid Blue [] Vivid Green [] Vivid Red Menu_[]. See Menus and Settings (p. 23). Use the select ®. Use 4. or an the Colors ÷ button image 4.
• When there is not enough space left on the memory card, the My Colors effects cannot be added, • Although My Colors effects can be added any number of times to an image, the image quality will gradually deteriorate with each application and the intended colors may not be achieved. • Color in images taken using My Colors (p. 62) in shooting mode and images edited with the My Colors function in playback mode may differ slightly. _" o __.
In playback mode (including single image playback and index playback), you can attach sound memos (up to one minute) to an image. The sound data is saved in the WAVE format. [] (Play) Menu_[]. See Menus and Settings (p. 23). Use the ÷ or attach a sound + button memo to select to and an image press @ to m eThe sound memo panel will display. Select [] (Record) and press @. eThe elapsed time and the remaining time display. ePressing the FUNC./SET button pauses the recording.
IErase [] Select [Erase] intheconfirmation screen andpressthe FUNC.ISET button. You can record a continuous sound memo for up to approximately 2 hours without taking a picture. [] (Play) Menu_ 1_. See Menus and Settings (p. 23). OThe elapsed recording time displays. _ eYou can use the ÷ or 41, button to change the sampling rate. The recording quality rises progressively as you select [11.025 kHz] [22.050 kHz] or [44.100 kHz]* but the recorded file sizes increase S_u_Rec°rdTerPanel correspondingly.
Sound Recorder Panel Use the ÷ or "I, button to select an option and press FUNC./SET. [] Exit [] Record [] Stop [] Play (Use the ÷ or @ button to select a sound memo and then press the FUNC./SET button.) Rewind [] (Holding down the FMNC./SET button rewinds. The sound memo cannot be heard while rewinding.) Fast Forward [] (Holding down the FUNC./SET button fast forwards. The sound memo cannot be heard while fast forwarding.
Automated playback of memory card images. Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard. [] All Images Plays all images on a memory card in order. [] Date [] My Category Plays the images in the selected category in order. [] Folder Plays images in a specified folder in order. [] Movies Plays movie files only, in order. [] Stills Plays still images only, in order. _11-_'_ Custom '1-3 Plays images bearing a specified date in order.
Select [Start] and press _. eThe following functions are available during slide shows. - Pausing/resuming the slide show: press the FUNC./SET button - Fast forwarding/rewinding the slide show: press the ÷ or "I_ button (continue to hold the button to switch between images more rapidly) - Stopping the slide show: press the MENU button. Transition Effects You can select the transition effect used when one image is replaced by another. [] No transition effect.
Select a date/category/folder to play back (@/_]/1"1) _Q 99
Selecting Images for Playback (511-U) Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. Select _1, [] or [] and press _. eOnly the [] icon will display at first. When you set [], the icon will change to [] and [] will display. [] and [] will change in the same way when they are set.
Adjusting the Play Time and Repeat Settings ePlay Time Sets the duration that each image displays. Choose between 3"-10 seconds, 15 seconds and 30 seconds. Displaying time can vary slightly depending on the image. * Default setting. eRepeat Sets whether the slide show stops when all the slides have been displayed or continues until stopped. [Set Select [Play the desired up] and Time] option. press _. or [Repeat] and then ePressing the MENU button cancels the setting.
You can protect important images and movies from accidental erasure. You can configure the protection settings for each image singly while viewing them. Select Select by Date Select by Category You can protect the images from a specified date. You can protect the images in a specified category. Select by Folder All Images You can protect the images in a specified folder. You can protect a the mages on a memory card. [] (Play) Menu_[]. See Menus and Settings (p. 23).
Seie tthe imag;;idatei ate.o Y ; ide;to protect iiiiiiJ}}iiiiiiiil;i/ and press .[Select] Use the ÷ or ,_ button to select an mage and press the FUNC/SET button - Pressing the FUNC./SET button i _ again cancels the setting. - You can also protect images in the index playback mode. Protect,on Icon - Press the MENU button to complete the setting. i • [Select by Date] [Select by Category] [Select by Folder] Use the ÷ or _1, button to select a date, category or folder and press the FUNC.ISET button.
You can play back images on a television with the supplied AV cable. Turn off the Connect the the camera's minal. Camera and the TV. AV cable A/V OUT to ter- eOpen the DIGITAL terminal cover with a fingernail from the lef[ side and plug the AV cable in all the way. Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. Turn on the TV and Turn on the camera. switch it to video mode.
Youcanerase images fromamemory card. Select Select by Date Erase images after selecting Erases images corresponding date. Select by Category Erases images Select by Folder All Images Erases Erases images in the selected folder. a mages on a memory card. [] (Play) in the selected them one at a time. to the selected category. Menu,S. See Menus and Settings (p. 23). "U D" Select a menu item and press _. eProceed to Step 5 if you select [All Images].
Select and the press image, date, category or folder @. e[Select] Use the ÷ or ,_ button to select an image and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can also erase images in the index playback mode. e[Seleet by Date] [Select by Category] [Select by Folder] Use the ,IF or 4k button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting.
Print Settings/Transfer Settings You can also use the touch control dial to select images and perform various operations. See the Basic Guide, pp. 4, 22. You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards.
Turn (Print) the mode dial to MenuJJe_Select [] (Playback)_ a menu [] item,S. See Menus and Settings (p. 23). OProceed to Step 4 if you select [Select All Images]. Select print the and image, press date, category or folder _. • [Select Images & Qty.] Selection methods differ for the Print Type settings (p. 110). Number of Print Copies - [] (Standard)ItalY(Both) Use the ÷ or 4' button to select an image, press the FUNC.
i! O[Select by Date] [Select by Category] [Select by Folder] Use the 4" or 4, button to select a date, category or folder and press the FUNC./SET button. ....... __ _ _ - Pressing the FUNC./SET button again cancels the setting. - You can select multiple dates, categories or folders. - Use the ÷ or ,_ button to confirm each date, category or folder image. [select gory] i}: 01" and [Select K n by Folder] i)y Cate- options, .....
Setting the Print Style After setting the print style, select the image(s) to print. The following print settings can be selected. *Default Print Type _ Standard* Index II[] Both reduced Prints one size image in anper index page. format. Prints the selected images together Adds the date to the print. [] Adds the file number to the print. Clear DPOF data (On*lOft') at a index Prints formats. the images in both the standard and [_ Date (On/Oft _) File No.
• Images with date imprints created by [] (Postcard Date Imprint Mode) (p. 40) will have the date imprinted regardless of the [Date] setting. Accordingly, the date may be printed twice if [Date] is set to [On]. • Dates print in the style specified in the [Date/Time] menu (p. 27). You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer.
All the Images [] (Play) on a Memory Menu_ Card Lm. See Menus and Settings (p. 23). Select [Mark all] and press _, eSelecting [Reset] cancels all transfer order settings. Select [OK] and press _. • Images are transferred in order according to the file number. • A maximum of 998 images can be selected.
I Customizing theCamera(MyCameraSettings) can use images You the touch control to select perform also various operations. See thedial Basic Guide, p. 4. and My Camera allows you to customize the start-up image and startup, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes.
Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the [] and [] menu items. You can also use the supplied sol_bNare to upload your computer's images and sounds to the camera. A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ tmageBrowser) to restore the default settings to the camera.
Seethesupplied Software Starter Guide for more information on creating and adding to the My Camera data.
i Troubleshooting E_ Power is not turned on. • Press the power button (Basic Guide p. 10). Memory card slot/battery cover is open. eConfirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 8). Battery charge insufficient to operate camera ("Change the battery pack" message displays). elnsert a fully charged battery into the camera (Basic Guide p. 7). eUse the AC Adapter Kit ACK-DC30 (sold separately) (p. 134).
I KP],] [T_331[t_t] LCD monitor is set to Off. ePress the DISP. button to turn on the LCD monitor (p. 12). If [Power Saving] is set to [Display Oft], the power saving function will shut down the LCD monitor while shooting in [] mode. The LCD monitor will turn on if a button other than the power switch or shutter button is operated. Incompatible image has been selected as the • Change the start-up image in the My Camera settings (p.
A slow shutter speed has • Set tS mode to a setting other than likely been selected [Off] (p. 32). because of insufficient eRaise the ISO speed (p. 69). lighting. eSet the Auto ISO Shift to [On] (p. 70). eSet the flash to a setting other than [] (Flash Off) (Basic Guide p. 14). eSet the self-timer (Basic Guide p. 16) and secure the camera to something, such as a tripod.
Memory cardisfuii iinse_anewmemory card iBasic Guide p. 8). • If required, download the images to a computer and erase them from the memory card to make space. Memory card is not formatted correctly. OFormat the memory card (p. 29). • If reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest ......... SD memory card or SDHC memory card is write protected. Canon Customer Support Help Desk. oSlide the write protect tab of the memory card upward (p. 132).
Insufficient light for shooting. OSet the flash to [] Guide p. 14). The subject is underexposed because the surroundings are too bright, OSet the positive OUse AE function Subject is too far away for flash to reach, oShoot within correct flash range of the subject when using the built-in flash (p. 139). ORaise the ISO speed and then shoot (p. 69).
Light fromtheflashhas eThis isaphenomenon thatoccurs reflected offdust particleswithdigital cameras anddoes not orinsects intheair.This constitute amalfunction. isparticularly noticeable when shooting using the wideangle. Light isreflected back fromtheeyes when the flashisused indark areas. eSetthe[Red-Eye] function to[On] andshoot (p.36).Forthismode to beeffective, thesubject must be looking right atthered-eye reduction lamp. Tryasking them tolookdirectly atthelamp.
Memory card slot/battery cover was opened with power on. _OFirst close the memory card slot/ _, battery cover and then turn the power on and then off again. (Basic Guide p. 7). IL'A The following types of memory cards are used. - Slow recording cards. - Cards formatted on a different camera or a computer. - Cards which have had images recorded and erased repeatedly. • Although the recording time may not display properly during shooting, the movie will be recorded correctly on the memory card.
Youattempted toplay back images shotwith another camera or images edited with a computer. File name was changed with a computer or file location was changed. OComputer images that cannot be played back may play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF). OSet the file name or location on the file format/structure of the camera. (Refer to the Software Starter Guide for details).
Battery is not being used to its full capacity. eSee Battery Handling Precautions (p. 130). Battery life exceeded if battery loses its charge quickly at normal temperature (23 °C/73 °F). eReptace the battery with a new one (Basic Guide p. 7). Battery life exceeded, eRep ace the battery with a new one (Basic Guide p. 7). i Ivl 1 1"I 1!1t ,' ll Incorrect video system setting, eSet the video system to the appropriate setting, NTSC or PAL, for your TV (p. 27). Shooting in Stitch Assist mode.
Camera andprinter not eAttach thecamera totheprinter properly connected, securely withthesupplied cable. Printer power isoff. eTurn ontheprinter. Incorrect print connection, elnthe[] (Setup)menu, select [Print Method] andselect [Auto] (p.27).
lust of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Otmage is being recorded to the memory card, or the playback mode is starting up. oYou turned on the camera without a memory card installed, or with a memory card installed in the wrong orientation (Basic Guide, p. 8). OThe SD memory card or SDHC memory card is write-protected.
• The file name could not be created because there is a file with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached, tn the Set up menu, set the File Numbering option to [Auto Reset]; alternatively, save all the images you wish to retain onto a computer, then reformat the memory card. Please note that formatting will erase all the existing images and other data. • Battery charge is insufficient to operate the camera.
oYou attempted to rotate an image recorded in a different camera or data type, or an image edited with a computer. oA sound memo cannot be added to this image since the data type of the existing sound memo is incorrect, or the sound memo cannot be played back. oYou attempted to register an image recorded in a different camera or a movie as a start-up image. oYou attempted to apply a My Colors effect to a movie or an image recorded in a different camera.
oCoutd notsave apartoftheprint, transfer orslide show settings. oYou attempted tosettheprintsettings foranon-JPEG image. OThe computer wasunable todownload theimage duetothe large amount ofimages (approx. 1000) stored onthememory card. OCamera detected anerror while moving thelensandcutthe power automatically. Thiserror message mayappear ifyoupress onthelens while itismoving orturnonthecamera inadusty or sandy environment. Turnonthecamera again andshoot or playback images.
I Appendix The following icon and message will display. [] J Changethe Battery charge is low. Recharge it as soon as possible if it will be used for an extended period. Battery charge is insufficient to operate the camera. Replace the battery immediately. battery pack Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with a soft cotton swab before charging or using the battery.
You may be able to check the charge state depending the terminal cover is attached (Fig. C, D). Fig. C Fig. D Attach it so the ,& is visible • You are recommended upon how Attach it the opposite way to Fig. C. to use it in the camera until it is depleted and to store it in an indoor location with low relative humidity and between the temperatures of 0 - 30 °C (32 - 86 °F).
t: l "nl rrn j tL'A tn'n?n' j , Protec Slide the switch up. Writing/Erasing Possible Slide the switch down (you can protect the images and other data on the card) Writing/Erasing Impossible Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card. Do not allow dirt, water or foreign objects to contact the terminals on the back of the card.
• Please note that formatting (initializing) an memory card erases all data, including protected images. • You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.
It is best to power the camera with AC Adapter Kit ACK-DC30 separately) when you are using it for long periods of time or connecting it to a computer. (sold the compact power adapter first and then plug Connect the power cord to __'"_ the other end into the power outlet. Compact Power Adapter CA-DC10 Open the memory card slot/battery cover, push the battery lock in the direction of the arrow and insert the it locks, DC coupler DC Coupler DR-30 until eSlide the memory card slot/battery cover closed.
High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions explanation.
• Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera's front panel. A tripod can be used even when the flash is attached. Batteries eCharge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints.
water to clean the camera. These substances may distort or damage the INever use thinners, benzine, detergents or equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Viewfinder and LCD Monitor Use a lens blower brush to remove dust and dirt.
All data is based on Canon's standard testing methods. Subject to change without notice. PowerShot SD850 IS DIGITAL ELPH/DIGITALIXUS 950 IS Camera Effective Pixels Image Sensor Lens (W): Max. wide angle (T): Max. telephoto Approx. 8.g million 1/2.5-inch type CCD (Total number of pixels: Approx. 8.3 million) 5.8 (W) - 23.2 (T) mm (35mm film equivalent: 35 (W) - 140 (T) mm) f/2.8 (W) - f/5.5 (T) Digital Zoom Approx. 4.Ox (Up to approx.
|SO Speed .1 Auto .2, High ISO Auto .2, ISO 8011001200/4001 800/1600 "1 Standard Output Sensitivity, Recommended Exposure Index. *2 Camera automatically sets the optimal speed. White Balance Auto, Day Light, Cloudy, Tungsten, Fluorescent H or Custom Built-in Flash Auto*, On*, Off * Red-eye reduction, FE Lock and slow synchro available Flash Range Normal: Fluorescent, 50 cm - 3.5 m (1.6 - 11 ft.) (W), 50 cm - 2.0 m (1.6 - 6.6 ft.) (T) (When ISO speed is set to AUTO.
Compression Number of Recording Pixels (Still Images) Number of Recording Pixels (Movies) Sound Memo Superfine, Fine, Normal Large: 3264 x 2448 Medium 1: 2592 x 1944 Medium 2: 2048 x 1536 Medium 3: 1600 x 1200 Small: 640 x 489 Postcard: 1696 x 1200 Widescreen: 3264 x 1832 pixels pixels pixels pixels pixels pixels pixels Standard, Color Accent, Color Swap: 640 x 480 pixels (30 frames/sec., 15frames/sec.) 320 x 240 pixels (30 frames/sec., 15frames/sec.
Playback Modes Single (histogram displayable), Index (9 thumbnail images), Magnified (approx. 10x (max.) in LCD monitor, advance or reverse through magnified images possible), My Category, Jump (date, my category, folder, movie, tenth, hundredth). In index playback mode, it displays 9 images at once.), Slide show, Red-Eye Correction, My Colors, Sound memos (recording/playback up to 1 min.
Battery Capacity (Battery Pack NB-5L (Fully charged)) Number of Images Shot LCD Monitor ON Playback Time (Based on the CIPA standard) LCD Monitor Off Approx. 230 images Approx. 700 images Approx. 6 hours • The actual figures will vary according to the shooting conditions and settings. eMovie data is excluded. eAt low temperatures, the battery performance may diminish and the low battery icon may appear very rapidly.
Memory Cards and Estimated I'll: Recording Pixels [] (Large) 3264 x 2448 pixels Compression 32MB (Medium 29 11 [ : 2048x 1536 ,oixe,s [] 123 49 20 2592 x 1944 pixels [](Medium2) _ SDC512MSH 5935 1) []1600(Medium x 1200 3)pixels SDC128M _1148 _1 [] Capacities Card included with the camera 87 _73 i i6 ;[U[ 52;;! I 36 i_i...........................
Movie Recording Pixe]s Frame Rate 32MB SDC-128M SDC-512MSH 1 min. 1 sec. 3 min. 57 sec. [] [] [] 14 sec. Standard (640x460pixels [] 27 sec. 1 rain.56 sec. 7 rnin.30 sec. [] 38 sec. 2 min.42 sec. 10rain.29sec. 1 rain.7 sec. 4 rain.39 sec. 17rain.58sec. 20 sec. 1 rain.27 sec. 5 rnin.39sec. [] 3olor Accenl [] [] (320x240pixels [] Color Swap [] Fast [] Frame Rat_ (320x240pixels [] [] Compact (160x 120pixels [] [] [] [] 3 min.9 sec. 13min,2 sec. 60rain.21sec. _1" 7 rnin.30sec.
Image Data Sizes (Estimated) Compression Recording Pixels [] [] [] [] (3264 x 2448 pixels) 3436 KB 2060 KB 980 KB [] (2592 x 1944 pixels) 2503 KB 1395 KB 695 KB [] (2048 x 1536 pixels) 1602 KB 893 KB 445 KB [] (1600 x 1200 pixels) 1002 KB 558 KB 278 KB [] (640 x 480 pixels) 249 KB 150 KB 84 KB [] (1600 x 1200 pixels) [] (3264 x 1832 pixels) 558 KB 2601 KB Recording Pixels Standard [] Color Accent [] Color Swap [] (640 x 480 pixels) [] (320 x 240 pixels) Fast Fra
SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.26 x 0.94 x 0.08 in.) Weight Approx. 2 g (0.07 oz.) MultiMediaCard Interface Compatible with MultiMediaCard standards Dimensions 32.0 x 24.0 x 1.4 mm (1.26 x 0.94 x 0.06 in.) Weight Approx. 1.5 g (0.05 oz.) Battery Pack NB-5L Type Rechargeable lithium-ion battery Nominal Voltage 3.7 V DC Typical Capacity 1120 mAh Cycle Life Approx.
Compact Power Adapter CA-DCIO (Included with the separately sold AC Adapter Kit ACK-DC30) Rated Input 100 - 240 V AC (50/60 Hz) Rated Output 4.3 V DC, 1.5 A Operating Temperatures 0- 40 °C (32- Dimensions 42.6 x 104.4 x 31.4 mm (1.68 x 4.11 x 1.24 in.) Weight (excluding cord) Approx. 180 g (6.35 oz.) 104 °F) power U.S.A. and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.
I INDEX Numerics 3:2 Guide .............................. 41 A E AC Adapter Kit ACK-DC30 . 134 Add Frame ............................ 89 AE Lock ................................ 53 AF Frame ....................... 15, 49 AF Lock ................................. 51 AF-assist Beam ..................... 24 AiAF ...................................... 49 Auto ISO Shift ....................... 70 Auto Play (Slide Show) ......... 97 Auto Rotate Function ............ 73 Erasing All Images ....................
Quick-bright LCD............... 14 Shooting Information ......... 15 Using theLCD Monitor ......12 Long Shutter Mode ................ 57 M Macro ...................... Basic 3, 15 Magnifying ............................. 80 Memory Card Estimated Capacities ....... 143 Formatting ................ 29, 133 Handling .......................... 132 Inserting ................... Basic 8 Menu FUNC. Menu .............. 22, 24 Menu List .............. 24 Menus and Settings .......... 22 My Camera Menu ..............
Sound Recorder Data Rates and Recording Durations (Estimated) ............................................ 144 Spot AE Point Frame ............ 55 Spot Frame ........................... 15 System Requirements .. Basic 25 T Telephoto ..................... Basic 14 Time Lapse ........................... 42 Time Zone ...................... 20, 27 Touch Control Dial ......... Basic 4 Transition Effects Playback ........................... 88 Slide Show ........................ 98 P Video System ................
FCC Notice (Digital Camera, Model PC1235 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Battery Charger CB-2LX This product is not intended to be serviced. Should the product cease to function in its intended manner, it should be returned to the manufacturer or be discarded. This power unit is intended to be correctly orientated in a vertical or floor mount position. IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A.
Trademark Acknowledgments • Windows, Windows Vista and the Windows Vista logo are trademarks of Microsoft Corporation, registered in the US and other countries • Macintosh, the Mac logo, Quick Time and the QuickTime logo are trademarks of Apple Computer, Inc., registered in the US and other countries • The SDHC logo is a trademark Copyright © 2007 Canon Inc. All rights reserved.
I Functions Available in Each Shooting Mode Configure the settings to the shooting conditions O and shoot. OM DEqi_ Function [] [] [] _ [] 'tl_ _I_]W Page Dm Medium 2 [] [] [] Recording Medium 3 [] Pixels Small [] Postcard [] - _ Widescreen [] - _ Large Medium 1 i!,, ] J p. 30 - Movie Super Fine Compression Fine Normal Frame 1 [] [] [] _.42 p. 30 p.
I_1 aM Function [] [] [] _ []Dm[]ml_m'_ Page []m ..... !!_1!! Digital Tele-Converter Evaluative Metering Method O O O O p. 55 0 (2 o ..... o_ Exposure Compensation - o<_> Shift 0 (8 Long Shutter White O CenterWeightedAvg. Spot Exposure _ili!!_!ii!!i_!i!i!i!!iiii!!_ill p. 33 o Balance p. 57 _/_3) My Colors p. 56 p. 44 _(_3 ..... _(_3) p. 59 - Save Original _)!") ...... ISO Speed - _(13 p. 62 p. 68 _(13) _(13) _(13 p. 69 Auto ISO Shift(_6) p.