User Manual
Table Of Contents
- Before Use
- Basic Guide
- Advanced Guide
- 1 Camera Basics
- 2 Auto Mode
- 3 Other Shooting Modes
- 4 P Mode
- 5 Playback Mode
- 6 Setting Menu
- Adjusting Basic Camera Functions
- Silencing Camera Operations
- Adjusting the Volume
- Hiding Hints and Tips
- Date and Time
- World Clock
- Lens Retraction Timing
- Using Eco Mode
- Power-Saving Adjustment
- Screen Brightness
- Hiding the Start-Up Screen
- Formatting Memory Cards
- File Numbering
- Date-Based Image Storage
- Checking Certification Logos
- Display Language
- Adjusting Other Settings
- Restoring Defaults
- Adjusting Basic Camera Functions
- 7 Accessories
- 8 Appendix
209
ç Contents
Connection status of Eye-Fi cards in the camera can be checked
on the shooting screen (in regular information display mode) or
playback screen (in simple information display mode).
(Gray)
Not connected
(Blinking white)
Connecting
(White)
Connected
(Animated)
Transfer in progress*
1
Interrupted
Not communicating
Error acquiring Eye-Fi card information*
2
*1 Power saving (
=
44) on the camera is temporarily disabled during
image transfer.
*2 Restart the camera. Repeated display of this icon may indicate a
problem with the card.
Images labeled with a [ ] icon have been transferred.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the
connection status, as needed.
● Press the [
] button,
choose [Eye-Fi Settings] on the
[ ] tab, and then press the [ ]
button.
● Choose [Connection info], and
then press the [
] button.
● The connection information
screen is displayed.