PowerShot SX520 HS Camera User Guide

83
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Using the Menu”
(
=
82), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
● Press the [ ] button.
● Press the [
][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an ending image.
● Press the [ ] button to choose [Last
image], and then press the [ ] button.
● Press the [
][ ] buttons to choose an
image, and then press the [ ] button.
● Images before the rst image cannot be
selected as the last image.
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Using the Menu”
(
=
82), choose [Select] and press the
[ ] button.
2
Choose an image.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
● To cancel selection, press the [
] button
again. [ ] is no longer displayed.
● Repeat this process to specify other
images.
3
Protect the image.
● Press the [ ] button. A conrmation
message is displayed.
● Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before nishing the setup process in step 3.