Getting Started CEL-SV5DA20 ENGLISH CEL-SV5DA210
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera Battery Pack NB-6LH*1 Neck Strap*2 Battery Charger CB-2LYE Lens Cap (with cord)*2 *1 Do not peel off the battery pack label. *2 For attachment instructions, refer to the Camera User Guide that can be downloaded from the Canon website. • Printed matter is also included. • A memory card is not included. Compatible Memory Cards No memory card is included.
Manuals and Software You can download manuals and software from the following URL. http://www.canon.com/icpd/ z With a computer connected to the Internet, access the above URL. z Access the site for your country or region. z Adobe Reader is required to view the manuals. z You can also download software from the website. For instructions on downloading and installing the software, refer to the Camera User Guide available for download.
Initial Preparations Inserting the Battery Pack and Memory Card 1 Open the cover. (2) z Slide the cover (1) and open it (2). (1) 2 Insert the battery pack. z Holding the battery pack with the (1) (2) terminals (1) facing as shown, press the battery lock (2) in the direction of the arrow and insert the battery pack until the lock clicks shut. z If you insert the battery pack facing the wrong way, it cannot be locked into the correct position.
Initial Preparations 4 Close the cover. z Lower the cover (1) and hold it down as (1) you slide it, until it clicks into the closed position (2). (2) Setting the Date and Time 1 Turn the camera on. z Press the ON/OFF button. z The [Date/Time] screen is displayed. 2 Set the date and time. z Press the [q][r] buttons to choose an option. z Press the [o][p] buttons to specify the date and time. z When finished, press the [m] button. 3 Specify your home time zone.
Initial Preparations Changing the Date and Time To adjust the date and time once you have set it, do the following. 1 Press the [n] button. 2 Move the zoom lever to choose the [3] tab. 3 Press the [o][p] buttons to choose [Date/Time], and then press the [m] button. 4 Follow step 2 in “Setting the Date and Time” to adjust the settings. 5 Press the [n] button. Display Language Change the display language as needed. 1 Enter Playback mode. z Press the [1] button. 2 Access the setting screen.
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on and enter [ ] mode. z Press the ON/OFF button. z Set the mode dial to [ ]. 2 Compose the shot. z To zoom in and enlarge the subject, move the zoom lever toward [i] (telephoto) as you watch the screen, and to zoom away from the subject, move it toward [j] (wide angle). 3 Shoot.
Trying the Camera Out Viewing 1 Enter Playback mode. z Press the [1] button. 2 Browse through your images. z To view the previous or next image, press the [q][r] buttons. z Movies are identified by a [ ] icon. To play movies, go to step 3. 3 Play movies. z Press the [m] button, press the [o][p] buttons to choose [ ], and then press the [m] button again. z Playback now begins, and after the movie ] is displayed. is finished, [ z To adjust the volume, press the [o][p] buttons.
PC2157 WM223 © CANON INC.
