Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes Y P O P Mode Camera User Guide ENGLISH C • Make sure you read this guide, including the “Safety Precautions” section (= 6), before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Battery Pack NB-6LH Camera Battery Charger CB-2LY/CB-2LYE Printed Matter Compatible Memory Cards C The following memory cards (sold separately) can be used, regardless of capacity. • SD memory cards* • SDHC memory cards* • Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc.
Before Use Part Names and Conventions in This Guide Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes Lens Power button Microphone Wi-Fi antenna area Speaker Flash Zoom lever switch (N-Mark)* Shooting: / Tripod socket DC coupler terminal cover Playback: / Memory card/battery cover Shutter button * Used with NFC features (= 91).
Table of Contents Package Contents..........................2 Compatible Memory Cards.............2 Preliminary Notes and Legal Information......................................2 Part Names and Conventions in This Guide...................................3 Table of Contents............................4 Common Camera Operations.........5 Safety Precautions..........................6 Basic Guide....................... 9 Initial Preparations........................10 Trying the Camera Out.................
Before Use Common Camera Operations zz Focus on faces.......................................................................... 25, 41, 58 zz Without using the flash (Flash Off)........................................................ 26 zz Include yourself in the shot (Self-Timer)......................................... 31, 48 zz Add a date stamp.................................................................................. 32 zz Movie clips and photos together (Movie Digest)..........................
Safety Precautions • Before using the product, ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted here are intended to prevent you and other persons from being injured or incurring property damage. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death. • Do not trigger the flash in close proximity to people’s eyes.
• Do not allow the camera to maintain contact with skin for extended periods. Even if the camera does not feel hot, this may cause low-temperature burns, manifested in redness of the skin or blistering. Use a tripod in hot places, or if you have poor circulation or insensitive skin. Caution Denotes the possibility of injury. • When carrying the product by the strap, be careful not to bang it, subject it to strong impacts or shocks, or let it get caught on other objects.
Before Use • If your product uses multiple batteries, do not use batteries that have different levels of charge together, and do not use old and new batteries together. Do not insert the batteries with the + and – terminals reversed. This may cause the product to malfunction. Basic Guide Advanced Guide Camera Basics • Do not sit down with the camera in your pant pocket. Doing so may cause malfunctions or damage the screen.
Before Use Basic Guide Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Basic information and instructions, from initial preparations to shooting and playback Initial Preparations............................................ 10 Attaching the Strap................................................. 10 Holding the Camera............................................... 10 Charging the Battery Pack..................................... 10 Inserting the Battery Pack and Memory Card........
Initial Preparations Charging the Battery Pack Before use, charge the battery pack with the included charger. Be sure to charge the battery pack initially, because the camera is not sold with the battery pack charged. Prepare for shooting as follows. Attaching the Strap 1 Insert the battery pack. zz Thread the end of the strap through the strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ).
2 Insert the battery pack. • To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery pack, see “Number of Shots/Recording Time, Playback Time” (= 155).
2 Set the date and time. Removing the Battery Pack and Memory Card zz Press the buttons to choose an Remove the battery pack. option. zz Open the cover and press the battery zz Press the buttons to specify zz The battery pack will pop up. zz When finished, press the button. lock in the direction of the arrow. the date and time. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes Remove the memory card.
Before Use Display Language Changing the Date and Time Adjust the date and time as follows. Change the display language as needed. 1 Access the camera menu. 1 Enter Playback mode. zz Press the button. zz Press the <1> button. 2 Choose [Date/Time]. zz Move the zoom lever to choose the [3] tab. zz Press the buttons to choose [Date/Time], and then press the button. 2 Access the setting screen. Y P O zz Press and hold the button, and then immediately press the button.
Trying the Camera Out Still Images Movies 3 Compose the shot. zz To zoom in and enlarge the subject, move the zoom lever toward (telephoto), and to zoom away from the subject, move it toward (wide angle). Follow these instructions to turn the camera on, shoot still images or movies, and then view them. Shooting (Smart Auto) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. zz Press the power button.
Shoot. zz Press the shutter button all the way down. zz As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically. zz Keep the camera still until the shutter sound ends. zz After displaying your shot, the camera will revert to the shooting screen. Shooting Movies Start shooting. zz Press the movie button. The camera Elapsed Time Before Use Viewing beeps once as recording begins, and [ Rec] is displayed with the elapsed time.
Before Use zz Movies are identified by a [ play movies, go to step 3. ] icon. To Erasing Images You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. 1 Choose an image to erase. zz Press the buttons to choose an image. 3 Play movies. 2 Erase the image. zz Press the button, press the buttons to choose [ ], and then press the button again. zz Playback now begins, and after the movie ] is displayed.
Before Use Advanced Guide Basic Guide Advanced Guide Camera Basics Camera Basics Auto Mode / Hybrid Auto Mode Other basic operations and more ways to enjoy your camera, including shooting and playback options On/Off................................................................. 18 Power-Saving Features (Auto Power Down)......... 18 Shutter Button................................................... 19 Shooting Display Options................................ 19 Y P O Using the FUNC. Menu...........
On/Off Power-Saving Features (Auto Power Down) Shooting Mode zz Press the power button to turn the camera on and prepare for shooting. zz To turn the camera off, press the power button again. Playback Mode zz Press the <1> button to turn the camera on and view your shots. zz To turn the camera off, press the <1> button again. • To switch to Playback mode from Shooting mode, press the <1> button. • To switch to Shooting mode from Playback mode, press the shutter button halfway (= 19).
Shutter Button Shooting Display Options To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot. In this manual, shutter button operations are described as pressing the button halfway or all the way down. Press the
button to view other information on the screen, or to hide the information. For details on the information displayed, see “On-Screen Information” (= 144).
Using the FUNC. Menu 4 Finish the setup process. Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (= 147 – 148) or playback mode (= 153). 1 Access the FUNC. menu. 2 Choose a menu item. zz Press the buttons to choose a menu item, and then press the or button.
Using Menus 3 Choose a menu item. Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting [4], playback [1], and so on. Note that available menu items vary depending on the selected shooting or playback mode (= 149 – 152). 1 Access the menu. zz Press the button. 2 Choose a tab. zz Move the zoom lever to choose a tab.
On-Screen Keyboard Indicator Display Use the on-screen keyboard to enter information for Wi-Fi connections (= 94). Note that the length and type of information you can enter varies depending on the function you are using. Number of Available Characters The indicator on the back of the camera (= 3) lights up or blinks depending on the camera status. Color Entering Characters zz Press the buttons to choose a character, and then press the button to enter it.
Before Use Clock Basic Guide You can check the current time. Advanced Guide zz Press and hold the button. zz The current time appears. zz If you hold the camera vertically while using the clock function, it will switch to vertical display. Press the buttons to change the display color. zz Press the button again to cancel the clock display. • When the camera is off, press and hold the button, then press the power button to display the clock.
Before Use Basic Guide Auto Mode / Hybrid Auto Mode Convenient mode for easy shots with greater control over shooting Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes Shooting with Camera-Determined Settings............................................................. 25 Shooting (Smart Auto)............................................ 25 Shooting in Hybrid Auto Mode................................ 27 Scene Icons...........................................................
Shooting with Camera-Determined Settings 3 Compose the shot. zz To zoom in and enlarge the subject, move the zoom lever toward (telephoto), and to zoom away from the subject, move it toward (wide angle). (A zoom bar showing the zoom position is displayed.) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Zoom Bar Still Images Movies Shooting (Smart Auto) zz Press the power button.
Before Use zz If [Raise the flash] appears on the screen, move the switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera. Shoot. zz Press the shutter button all the way down. zz As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically. zz Keep the camera still until the shutter sound ends.
Still Images Movies Shooting in Hybrid Auto Mode You can make a short movie of the day just by shooting still images. The camera records 2 – 4-second clips of scenes before each shot, which are later combined in a digest movie. 1 Enter [ ] mode. zz Set the mode switch to [ ]. 2 Compose the shot. zz Follow steps 3 – 4 in “Shooting (Smart Auto)” (= 25) to compose the shot and focus. zz For more impressive digest movies, aim the camera at subjects about four seconds before shooting still images.
Before Use Still Images/Movies Movies • If the camera is turned on while the
button is held down, the camera will no longer sound. To activate sounds again, press the button and choose [Mute] on the [3] tab, and then press the buttons to choose [Off]. Still Images • A blinking [ ] icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still.
Still Images Movies Scene Icons People Icon In At Close Background Color Motion*1 Range Bright Backlit Gray – With Blue Sky Light Blue Backlit – Sunsets – – Spotlights Dark Orange C Dark Blue Tripod Used *2 Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in [ and [ ] modes.
Still Images Movies On-Screen Frames In [ ] mode, a variety of frames are displayed once the camera detects subjects you are aiming the camera at. • A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus. However, if the camera detects subject movement, only the white frame will remain on the screen.
• Moving the zoom lever will display the zoom bar (which indicates the zoom position). The color of the zoom bar will change depending on the zoom range. - White range: optical zoom range where the image will not appear grainy. - Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus). - Blue range: digital zoom range where the image will appear grainy.
Still Images Movies Still Images Adding a Date Stamp Customizing the Self-Timer You can specify the delay (0 – 30 seconds) and number of shots (1 – 10). 1 Choose [$]. zz Following step 1 in “Using the Self-Timer” (= 31), choose [$] and press the button. 2 Configure the setting. zz Press the buttons to choose [Delay] or [Shots]. zz Press the buttons to choose a value, and then press the button. zz Once the setting is complete, [$] is displayed.
Before Use • Shots taken without adding a date stamp can be printed with one as follows. However, adding a date stamp this way to images that already have one may cause it to be printed twice. - Print using printer functions (= 129) - Use camera DPOF print settings (= 133) to print - Use the software downloaded from the Canon website (= 127) to print Still Images Continuous Shooting In [ ] mode, hold the shutter button all the way down to shoot continuously.
Image Customization Features Still Images Changing Image Resolution (Size) Still Images Changing the Aspect Ratio Change the image aspect ratio (ratio of width to height) as follows. Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see “Number of 4:3 Shots per Memory Card” (= 155). zz Press the button, choose [ ] in the menu, and choose the desired option (= 20).
Still Images Red-Eye Correction Movies Changing Movie Image Quality Red-eye that occurs in flash photography can be automatically corrected as follows. 1 Access the [Flash Settings] 3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Recording Time per Memory Card” (= 156). screen. zz Press the button, choose [ ] in the menu, and choose the desired option (= 20).
Helpful Shooting Features Still Images Still Images Magnifying the Area in Focus Movies Displaying Grid Lines Grid lines can be displayed on the screen for vertical and horizontal reference while shooting. You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame. 1 Configure the setting. zz Press the button, choose [AF- zz Press the button, choose [Grid Lines] on the [4] tab, and then choose [On] (= 21).
Still Images Checking for Closed Eyes [ ] is displayed when the camera detects that people may have closed their eyes. Before Use Customizing Camera Operation Customize shooting functions on the MENU [4] tab as follows. For instructions on menu functions, see “Using Menus” (= 21). Still Images 1 Configure the setting. zz Press the button, choose [Blink Detection] on the [4] tab, and then choose [On] (= 21).
Still Images Still Images Deactivating the Red-Eye Reduction Lamp You can deactivate the red-eye reduction lamp that lights up to reduce redeye when the flash is used in low-light shots. 1 Access the [Flash Settings] screen. Changing the Image Display Style after Shots You can change how long images are displayed and what information is displayed immediately after shooting.
Before Use Changing the Screen Displayed after Shots Basic Guide Change the way images are displayed after shots as follows. Advanced Guide 1 Set [Display Time] to [2 sec.], Camera Basics [4 sec.], [8 sec.], or [Hold] (= 38). Auto Mode / Hybrid Auto Mode 2 Configure the setting. zz Press the buttons to choose [Display Info]. Press the buttons to choose the desired option. zz To restore the original setting, repeat this process but choose [Off]. Off Displays only the image.
Before Use Basic Guide Other Shooting Modes Advanced Guide Camera Basics Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions Specific Scenes................................................. 41 Applying Special Effects.................................. 42 Enjoying a Variety of Images from Each Shot (Creative Shot).......................................................
Before Use Specific Scenes Still Images Shoot evening scenes without using a tripod (Handheld NightScene) Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. 1 Enter [4] mode. zz Beautiful shots of evening scenes or zz Set the mode switch to [4]. 2 Choose a shooting mode. zz Press the button, choose [ ] in the menu, and then choose a shooting mode (= 20).
Still Images Movies t Shoot fireworks (Fireworks) zz Vivid shots of fireworks. Before Use Applying Special Effects Basic Guide Add a variety of effects to images when shooting. Advanced Guide 1 Choose a shooting mode. zz Follow steps 1 – 2 in “Specific Scenes” (= 41) to choose a shooting mode. • Subjects appear larger in [ ] mode compared to other modes. • In [ ] mode, shots may look grainy because the ISO speed (= 54) is increased to suit the shooting conditions.
Still Images Enjoying a Variety of Images from Each Shot (Creative Shot) The camera determines the subject and shooting conditions, automatically applying special effects and recomposing the shot to emphasize the subject. Six still images are recorded for each shot. You can capture multiple still images with effects using camera-determined settings. 1 Enter [ ] mode. zz Set the mode switch to [ ]. 2 Shoot. zz Press the shutter button all the way down.
Still Images Choosing Effects You can choose effects for images captured in [ Still Images Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect) ] mode. zz After choosing [ ] mode, press the
button. zz Press the buttons to choose the effect, and then press the button. Shoot with the distorting effect of a fish-eye lens. zz Follow steps 1 – 2 in “Specific Scenes” Y P O ]. 2 Choose an effect level.
Still Images Movies Shots Resembling Miniature Models (Miniature Effect) Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 41) and choose [ ].
Still Images Shooting with a Toy Camera Effect (Toy Camera Effect) Still Images Shooting in Monochrome Shoot images in black and white, sepia, or blue and white. This effect makes images resemble shots from a toy camera by vignetting (darker, blurred image corners) and changing the overall color. zz Follow steps 1 – 2 in “Specific Scenes” (= 41) and choose [ zz Follow steps 1 – 2 in “Specific Scenes” ].
Before Use Special Modes for Other Purposes Still Images Auto Shooting after Face Detection (Smart Shutter) • You can also shoot as usual by pressing the shutter button. • The camera can detect smiles more easily when subjects face the camera and open their mouth wide enough so that teeth are visible. • To change the number of shots, press the buttons after choosing [ ] in step 1. [Blink Detection] (= 37) is only available for the final shot.
4 Face the camera and wink. zz The camera will shoot about two seconds after detecting a wink by the person whose face is inside the frame. zz To cancel shooting after you have triggered the self-timer, press the button. • If the wink is not detected, wink again slowly and deliberately. • Winking may not be detected if eyes are obscured by hair, a hat, or glasses. • Closing and opening both eyes at once will also be detected as a wink.
4 Join the subjects in the Still Images shooting area and look at the camera. zz After the camera detects a new face, the lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot. zz To cancel shooting after you have triggered the self-timer, press the button. • Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.
Before Use • If the flash fires, your shot may be overexposed. In this case, set the flash to [!] and shoot again (= 61). Basic Guide Advanced Guide Still Images Camera Basics High-Speed Continuous Shooting (High-Speed Burst) You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see “Continuous Shooting Speed” (= 156). 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 41) and choose [ 2 Shoot.
Before Use Basic Guide P Mode Advanced Guide Camera Basics More discerning shots, in your preferred shooting style Auto Mode / Hybrid Auto Mode Other Shooting Modes Y P O • Instructions in this chapter apply to the camera in [G] mode, with the mode switch set to [4]. • [G]: Program AE; AE: Auto Exposure • Before using a function introduced in this chapter in modes other than [G], make sure the function is available in that mode (= 146 – 151). Shooting in Program AE ([P] Mode)................
Still Images Movies Shooting in Program AE ([P] Mode) You can customize many function settings to suit your preferred shooting style. 1 Enter [G] mode. zz Follow steps 1 – 2 in “Specific Scenes” (= 41) and choose [G]. 2 Customize the settings as Before Use Image Brightness (Exposure) Still Images Basic Guide Movies Adjusting Image Brightness (Exposure Compensation) The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2.
Still Images Movies Locking Image Brightness / Exposure (AE Lock) Still Images Changing the Metering Method Before shooting, you can lock the exposure, or you can specify focus and exposure separately. Adjust the metering method (how brightness is measured) to suit shooting conditions as follows. zz Press the button, choose [ ] in the menu, and choose the desired option (= 2 0). zz The option you configured is now displayed. 1 Lock the exposure.
Still Images Changing the ISO Speed Correcting Image Brightness (i-Contrast) zz Press the button, choose [ ] in the menu, and choose the desired option (= 20). zz The option you configured is now displayed. Automatically adjusts the ISO speed to suit the shooting mode and conditions. AUTO 100, 200 400, 800 1600, 3200 Low Still Images For shooting outdoors in fair weather. For shooting in cloudy conditions, or at twilight. High For shooting night scenes, or in dark rooms.
Image Colors Still Images Still Images Movies Adjusting White Balance By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. zz Press the button, choose [ ] in the menu, and choose the desired option (= 20). zz The option you configured is now displayed. Auto Automatically sets the optimal white balance for the shooting conditions. Day Light For shooting outdoors in fair weather.
Still Images Movies Changing Image Color Tones (My Colors) Change image color tones as desired, such as converting images to sepia or black and white. Before Use • White balance (= 55) cannot be set in [ ] or [ ] modes. • With [ ] and [ ] modes, colors other than people’s skin tone may change. These settings may not produce the expected results with some skin tones. Still Images zz Press the button, choose [ ] in the menu, and choose the desired option (= 20).
Shooting Range and Focusing Still Images Shooting Distant Subjects (Infinity) Still Images Shooting Close-Ups (Macro) To restrict the focus to subjects at close range, set the camera to [e]. For details on the focusing range, see “Shooting Range” (= 156). zz Press the button, press the buttons to choose [e], and then press the button. zz Once the setting is complete, [e] is displayed. • If the flash fires, vignetting may occur.
Before Use • The shutter speed may be equivalent when you move the zoom lever all the way toward for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step 2 in “Zooming In Closer on Subjects (Digital Zoom)” (= 30). Still Images Movies Changing the AF Frame Mode Change the AF (auto focus) frame mode to suit the shooting conditions as follows. zz Press the button, choose [AF Frame] on the [4] tab, and then choose the desired option (= 21).
Before Use zz When the subject is detected, the camera beeps and [ ] is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range. zz If no subject is detected, [ ] is displayed. zz To cancel tracking, press the button again. 3 Shoot. zz Press the shutter button halfway. [ ] changes to a blue [ ], which follows the subject as the camera continues to adjust the focus and exposure (Servo AF) (= 60).
Still Images Still Images Changing the Focus Setting Shooting with Servo AF This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway. 1 Configure the setting. You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed.
Still Images Movies Shooting with the AF Lock The focus can be locked. After you lock the focus, the focal position will not change even when you release your finger from the shutter button. 1 Lock the focus. zz With the shutter button pressed halfway, Flash displayed. zz To unlock the focus, release the shutter button and press the button again. In this case, [%] is no longer displayed. 2 Compose the shot and shoot.
• In [Z] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (= 63). • In [Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing. Still Images Shooting with the FE Lock Just as with the AE lock (= 53), you can lock the exposure for the flash shots.
Other Settings Still Images Movies Changing the IS Mode Settings Still Images 1 Access the setting screen. Changing the Compression Ratio (Image Quality) zz Press the button, choose [IS Settings] on the [4] tab, and then press the button (= 21). Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as follows. For guidelines on how many shots at each compression ratio can fit on a memory card, see “Number of 4:3 Shots per Memory Card” (= 155).
Before Use Movies Basic Guide Shooting Movies with Subjects at the Same Size Shown before Shooting Advanced Guide Normally, once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting, you can choose not to reduce significant camera shake. zz Follow the steps in “Changing the IS Mode Settings” (= 63) to access the [IS Settings] screen.
Before Use Basic Guide Playback Mode Advanced Guide Camera Basics Have fun reviewing your shots, and browse or edit them in many ways Auto Mode / Hybrid Auto Mode Other Shooting Modes • To prepare the camera for these operations, press the <1> button to enter Playback mode. Y P O • It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras. Viewing...............................................................
Viewing Still Images Before Use Movies zz Movies are identified by a [ play movies, go to step 3. ] icon. To Advanced Guide After shooting images or movies, you can view them on the screen as follows. Camera Basics 1 Enter Playback mode. zz Press the <1> button. zz Your last shot is displayed. Auto Mode / Hybrid Auto Mode 3 Play movies. zz To start playback, press the button, 2 Browse through your images. zz To view the previous image, press the button.
• To switch to Shooting mode from Playback mode, press the shutter button halfway. • To deactivate Scroll Display, choose MENU (= 21) ► [1] tab ► [Scroll Display] ► [Off]. • To have the most recent shot displayed when you enter Playback mode, choose MENU (= 21) ► [1] tab ► [Resume] ► [Last shot]. • To change the transition shown between images, access MENU (= 21) and choose your desired effect in [1] tab ► [Transition].
Before Use • GPS information display is not available for images that lack this information. • [---] is shown instead of numerical values for items not available on your smartphone or items not recorded correctly. • UTC: Coordinated Universal Time, essentially the same as Greenwich Mean Time Movies Viewing Short Movies Created When Shooting Still Images (Digest Movies) View digest movies recorded automatically in [ of still image shooting as follows. ] mode (= 27) on a day 1 Choose an image.
Browsing and Filtering Images Still Images Still Images Movies Navigating through Images in an Index By displaying multiple images in an index, you can quickly find the images you are looking for. 1 Display images in an index. zz Move the zoom lever toward to display images in an index. Moving the lever again will increase the number of images shown. zz To display fewer images, move the zoom lever toward . Fewer images are shown each time you move the lever. 2 Choose an image.
Before Use • When the camera has found no corresponding images for some conditions, those conditions will not be available. • To show or hide information, press the
button in step 2. • Options for viewing the images found (in step 2) include “Navigating through Images in an Index” (= 69), “Magnifying Images” (= 71), and “Viewing Slideshows” (= 71).
Image Viewing Options Still Images Viewing Slideshows Still Images Magnifying Images 1 Magnify an image. zz Moving the zoom lever toward will zoom in and magnify the image. You can magnify images up to about 10x by continuing to hold the zoom lever. zz To zoom out, move the zoom lever toward . You can return to singleimage display by continuing to hold it. 2 Move the display position and switch images as needed.
Still Images Changing Slideshow Settings You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image. 1 Access the setting screen. zz Press the button, and then choose [Slideshow] on the [1] tab (= 21). 2 Configure the settings. zz Choose a menu item to configure, and then choose the desired option (= 21). zz To start the slideshow with your settings, choose [Start] and press the button.
• Only still images shot with this camera are played back using Smart Shuffle. • Smart Shuffle is not available in the following cases: - There are less than 50 shots taken with this camera - An unsupported image is currently displayed - Images are shown in filtered display (= 69) - During group playback (= 70) Protecting Images Still Images Movies Protect important images to prevent accidental erasure by the camera (= 76). zz Press the button, and then choose [:] in the menu (= 20).
3 Protect the image. Using the Menu 1 Access the setting screen. zz Press the button and choose [Protect] on the [1] tab (= 21). zz Press the button. A confirmation message is displayed. zz Press the buttons to choose [OK], and then press the button. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode 2 Choose a selection method. zz Choose a menu item and an option as desired (= 21). zz To return to the menu screen, press the button.
3 Choose an ending image. Specifying All Images at Once zz Press the button to choose [Last image], and then press the button. 1 Choose [Select All Images]. zz Following step 2 in “Using the Menu” (= 74), choose [Select All Images] and press the button. 2 Protect the images. zz Press the buttons to choose an image, and then press the button. zz Images before the first image cannot be selected as the last image.
Still Images Erasing Images Movies You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (= 73) cannot be erased. 1 Choose an image to erase. zz Press the buttons to choose an image. 2 Erase the image. zz Press the button, and then choose [a] in the menu (= 20). zz After [Erase?] is displayed, press the buttons to choose [Erase], and then press the button.
Before Use Choosing Images Individually 1 Choose [Select]. Selecting a Range zz Following step 2 in “Choosing a Selection Method” (= 76), choose [Select] and press the button. 2 Choose an image. zz Once you choose an image following step 2 in “Choosing Images Individually” (= 74), [ ] is displayed. zz To cancel selection, press the button again. [ ] is no longer displayed. zz Repeat this process to specify other images. 3 Erase the image. zz Press the button.
Still Images Rotating Images 2 Rotate the image. zz Press the buttons to choose an image. Change the orientation of images and save them as follows. zz The image is rotated 90° each time you press the button. 1 Choose [\]. zz Press the button, and then choose zz To return to the menu screen, press the button. [\] in the menu (= 20). • Rotation is not possible when [Auto Rotate] is set to [Off] (= 78). zz Press the or button, depending on the desired direction.
Still Images Tagging Images as Favorites Movies zz Press the buttons to choose an You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images. • Viewing (= 66), Viewing Slideshows (= 71), Protecting Images (= 73), Erasing Images (= 76), Adding Images to the Print List (DPOF) (= 133), Adding Images to a Photobook (= 135) zz Press the button, and then choose [ ] in the menu (= 20).
Editing Still Images Before Use 4 Save the new image. zz Press the buttons to choose • Image editing (= 80 – 83) is only available when the memory card has sufficient free space. [OK], and then press the button. zz The image is now saved as a new file. Still Images Resizing Images zz Press the button. [Display new 1 Choose [Resize]. zz Press the button and choose [Resize] on the [1] tab (= 21). zz Press the buttons to choose an image, and then press the button.
Still Images Cropping You can specify a portion of an image to save as a separate image file. 1 Choose [Cropping]. Before Use • Editing is not possible for images shot at a resolution of [ (= 34) or resized to [ ] (= 80). • Images supported for cropping will have the same aspect ratio after cropping. • Cropped images will have a lower resolution than uncropped images. zz Press the button, and then choose [Cropping] on the [1] tab (= 21).
Before Use • Image quality of pictures you repeatedly edit this way will be a little lower each time, and you may not be able to obtain the desired color. • For some images, correction may be inaccurate or may cause images to appear grainy. • Images may look grainy after repeated editing using this function. Basic Guide • The color of images edited using this function may vary slightly from the color of images shot using My Colors (= 56).
4 Save as a new image and Movies Editing Movies review. zz Press the buttons to choose [New File], and then press the button. zz The image is now saved as a new file. zz Follow step 5 in “Resizing Images” (= 80). • Some images may not be corrected accurately. • To overwrite the original image with the corrected image, choose [Overwrite] in step 4. In this case, the original image will be erased. • Protected images cannot be overwritten.
3 Review the edited movie. Movies zz Press the buttons to choose [ ], and then press the button. The edited movie is now played. zz To edit the movie again, repeat step 2. zz To cancel editing, press the buttons to choose [ ]. Press the button, press the buttons to choose [OK], and then press the button again. 4 Save the edited movie. zz Press the buttons to choose [ ], and then press the button.
Before Use Basic Guide Wi-Fi Functions Advanced Guide Camera Basics Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services Auto Mode / Hybrid Auto Mode Other Shooting Modes What You Can Do with Wi-Fi............................ 86 Uploading Images to Web Services....................... 86 Sending Images to a Smartphone.......................... 87 Sending Images to a Computer............................. 87 Printing Images Wirelessly...........
What You Can Do with Wi-Fi Uploading Images to Web Services This camera is an approved Wi-Fi® product. You can wirelessly connect to and send images to the following devices and services. Note that, in this chapter, wireless LAN functions other than Wi-Fi may be referred to as Wi-Fi. Sending images via Wi-Fi requires some initial preparation on the camera and target devices. Preparations and methods of sending images vary depending on the destination.
Sending Images to a Smartphone Sending Images to a Computer Send images to smartphones and tablet computers that have Wi-Fi functions. You can also shoot remotely and geotag your shots from a smartphone or tablet. For convenience in this manual, smartphones, tablets, and other compatible devices are collectively referred to as “smartphones”. Use the software to wirelessly send images from the camera to a computer.
Registering Web Services Sending Images to Another Camera Use the Wi-Fi function to send images between Canon-brand cameras. Steps in sending images Camera Use a smartphone or computer to add to the camera Web services that you want to use. • A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services. • Check the CANON iMAGE GATEWAY website for details on browser (Microsoft Internet Explorer, etc.
Before Use Registering CANON iMAGE GATEWAY 4 Choose [ After linking the camera and CANON iMAGE GATEWAY, add CANON iMAGE GATEWAY as a destination Web service on the camera. choose [ button. 1 Log in to CANON iMAGE GATEWAY and access the camera settings page. http://www.canon.com/cig/ and visit the CANON iMAGE GATEWAY site for your region. zz Once the login screen is displayed, enter your user name and password to log in.
8 Choose [Auto] and establish the connection. Before Use zz Complete the setup process on the smartphone or computer. zz Press the buttons to choose Basic Guide Advanced Guide [Auto], and then press the button. Camera Basics zz [ ] (= 108) and CANON iMAGE zz Once the camera is connected to CANON iMAGE GATEWAY via the access point, an authentication code is displayed. 9 Enter the authentication code.
Registering Other Web Services You can also add Web services besides CANON iMAGE GATEWAY to the camera. Note that CANON iMAGE GATEWAY must be registered on the camera first (= 89). 1 Access the Web service Installing CameraWindow on a Smartphone Before connecting your camera to a smartphone, first install the free dedicated application, CameraWindow, on your smartphone. 1 Connect the smartphone to a settings screen. network.
• When using NFC, keep the following points in mind. - Avoid strong impact between the camera and smartphone. This may damage the devices. - Depending on the smartphone, the devices may not recognize each other immediately. In this case, try holding the devices together in slightly different positions. - Do not place other objects between the camera and smartphone. Also, note that camera or smartphone covers or similar accessories may block communication.
Installing the Software Windows 7 and Mac OS X 10.8 are used here for the sake of illustration. On a computer running Windows, configure the following settings before connecting the camera to the computer wirelessly. 1 Download the software. zz With a computer connected to the Internet, access http://www.canon.com/ icpd/. zz Access the site for your country or region. zz Download the software. 2 Install the files.
Before Use Accessing the Wi-Fi Menu Initial Connection via Wi-Fi To start with, register a camera nickname. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. 1 Access the Wi-Fi menu. zz Press the <1> button to turn the camera on. zz Press the button. Y P O After the Initial Wi-Fi Connection 2 Enter a nickname. zz Press the button to access the keyboard, and then enter a nickname (= 22). zz Up to 16 characters can be used.
Before Use Connecting via an Access Point Check sheet Basic Guide Network name (SSID/ESSID) The SSID or ESSID for the access point you use. Also called the “access point name” or “network name”. Connect to your access point via Wi-Fi as follows. Also refer to the access point user manual. Confirming Access Point Compatibility Confirm that the Wi-Fi router or base station conforms to the Wi-Fi standards in “Wi-Fi” (= 154). If you are already using Wi-Fi, confirm the following items.
Connecting to WPS-Compatible Access Points WPS makes it easy to complete settings when connecting devices over Wi‑Fi. You can use either Push Button Configuration Method or PIN Method for settings on a WPS supported device. 1 Confirm that the target device is connected to the access point. zz This step is not required when connecting to Web services. zz For instructions on checking the connection, refer to the device and access point user manuals. 2 Access the Wi-Fi menu (= 94).
5 Choose [WPS Connection]. zz Press the buttons to choose [WPS Connection], and then press the button. 6 Choose [PBC Method]. zz Press the buttons to choose [PBC Method], and then press the button. 7 Establish the connection. zz On the access point, hold down the WPS C connection button for a few seconds. zz On the camera, press the button to go to the next step. zz The camera will connect to the access point.
10 If you have selected a computer running Windows in step 9 for the first time: Install a driver. zz When the screen at left is displayed on the camera, click the Start menu on the computer, click [Control Panel], and then click [Add a device]. zz Double-click the connected camera icon. zz Driver installation will begin. zz After driver installation is complete, and the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
3 Enter the access point Previous Access Points You can reconnect to any previous access points automatically by following step 4 in “Connecting to WPS-Compatible Access Points” (= 96). • To reconnect to the access point, confirm that the target device is already connected to it, and then follow the procedure from step 9. Note that this step is not required when connecting to Web services.
Connecting without an Access Point Before Use zz The camera’s SSID is displayed. When connecting to a smartphone or printer via Wi-Fi, you can use the camera as an access point (Camera Access Point mode) instead of using another access point. Similarly, no access point is used in camera-to-camera connections (= 102). 1 Access the Wi-Fi menu 2 Choose the target device. Camera Basics Auto Mode / Hybrid Auto Mode Y P O network.
Before Use 6 Choose the target device. zz Press the buttons to choose the target device name, and then press the button. 7 For a smartphone connection: Adjust the privacy setting. zz Press the buttons to choose [Yes], and then press the button. zz You can now use the smartphone to browse, import, or geotag (= 109) images on the camera or shoot remotely (= 110). 8 Send or print the images.
Before Use Connecting to Another Camera zz When the target camera has been added successfully, the image transfer screen will be displayed. Proceed to “Sending Images” (= 103). Connect two cameras via Wi-Fi and send images between them as follows. • Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function.
Sending Images 3 Send the images. Send images wirelessly to destinations registered on the camera as follows. Note that when images are sent to a computer, the computer is used instead of the camera (= 105). 1 Choose [Select and send]. zz Press the buttons to choose [Select and send], and then press the button. 2 Choose images. zz Press the buttons to choose an image to send, and then press the button. [ ] is displayed.
• Keep your fingers or other objects off the Wi-Fi antenna area (= 3). Covering this may decrease the speed of your image transfers. • Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level. • When sending movies to smartphones, note that the supported image quality varies depending on the smartphone. For details, refer to the smartphone user manual.
Before Use Saving Images to a Computer When sending images to a computer, use the computer instead of the camera. Windows 7 and Mac OS X 10.8 are used here for the sake of illustration. For other functions, refer to the help system of the relevant software (some software excluded). 1 Display CameraWindow. zz In Windows, access CameraWindow by clicking [Downloads Images From Canon Camera].
3 Establish the connection. Using the <{> Button Once you have registered a smartphone or Image Sync (= 108) to the <{> button, you can connect to the registered destination simply by pressing the <{> button. Registering a Smartphone to the <{> Button Once you have connected to a smartphone initially via Wi-Fi by pressing the <{> button, you can simply press the <{> button after that to connect again for viewing and saving camera images on connected devices. 1 Press the <{> button.
Registering Image Sync to the <{> Button By registering Image Sync to the <{> button, you can simply press the <{> button to send any unsent images on the memory card to a computer via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending Images Automatically (Image Sync)” (= 108). 1 Prepare the camera. zz Register [ ] as the destination (= 89). zz Install the software on the destination computer, and configure the camera settings (= 93). 2 Press the <{> button. 3 Choose the destination.
3 Choose the type of images Sending Images Automatically (Image Sync) to send (only when sending movies with images). Images on the memory card that have not been transferred already can be sent to a computer or Web services via CANON iMAGE GATEWAY. Note that images cannot be sent only to Web services. Initial Preparations Install and configure the software on the destination computer. 1 Install the software. zz Install the software on a computer connected to the Internet (= 93).
Geotagging Images on the Camera Sending Images Images sent from the camera are automatically saved to the computer. If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server. Stored images are regularly erased, so make sure to turn on the computer and save the images. zz Follow the steps in “Connecting to WPS- Compatible Access Points” (= 96) to choose [ ]. zz Once the connection is established, the images are sent.
Before Use Shooting Remotely As you check a shooting screen on your smartphone, you can use it to shoot remotely. 1 Secure the camera. zz Once remote shooting begins, the camera lens will come out. Lens motion from zooming may also move the camera out of position. Keep the camera still by mounting it on a tripod or taking other measures. 2 Connect the camera and smartphone (= 87). zz In the privacy settings (= 98, 101), choose [Yes]. 3 Choose remote shooting.
Editing or Erasing Wi-Fi Settings zz Press the buttons to choose Edit or erase Wi-Fi settings as follows. an item to edit, and then press the button. zz The items you can change depend on what device or service the camera will access. Editing Connection Information 1 Access the Wi-Fi menu (= 94). Connection 2 Choose a device to edit. zz Press the buttons to choose the icon of the device to edit, and then press the button. 3 Choose [Edit a Device].
Returning the Wi-Fi Settings to Default Erasing Connection Information Erase connection information (information about devices that you have connected to) as follows. zz Following step 5 in “Editing Connection Information” (= 111), choose [Erase Connection Info] and press the button. zz After [Erase?] is displayed, press the buttons to choose [OK], and then press the button. zz The connection information will be erased.
Before Use Basic Guide Setting Menu Advanced Guide Camera Basics Customize or adjust basic camera functions for greater convenience Auto Mode / Hybrid Auto Mode Other Shooting Modes Adjusting Basic Camera Functions............... 114 Silencing Camera Operations.............................. 114 Adjusting the Volume........................................... 114 Hiding Hints and Tips........................................... 114 Date and Time......................................................
Adjusting Basic Camera Functions Hiding Hints and Tips MENU (= 21) functions on the [3] tab can be configured. Customize commonly used functions as desired, for greater convenience. Hints and tips are normally shown when you choose FUNC. (= 20) or MENU (= 21) items. If you prefer, you can deactivate this information. zz Choose [Hints & Tips], and then choose Silencing Camera Operations [Off]. Silence camera sounds and movies as follows. zz Choose [Mute], and then choose [On].
World Clock Lens Retraction Timing To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/ Time setting manually. Before using the world clock, be sure to set the date and time and your home time zone, as described in “Setting the Date and Time” (= 12). zz Choose [Lens Retract], and then choose [0 sec.]. 1 Specify your destination.
2 Shoot. zz To activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway. Adjust screen brightness as follows. zz Choose [LCD Brightness], and then press the buttons to adjust the brightness. Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (= 18). zz Choose [Power Saving], and then press the button.
Before Use Formatting Memory Cards Before using a new memory card or a card formatted in another device, you should format the card with this camera. Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up. 1 Access the [Format] screen. zz Choose [Format], and then press the button. 2 Choose [OK].
File Numbering Date-Based Image Storage Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers. zz Choose [File Numbering], and then choose an option. Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day. zz Choose [Create Folder], and then choose [Daily].
Checking Certification Logos Before Use Adjusting Other Settings Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body. zz Choose [Certification Logo Display], and then press the button. Basic Guide The following settings can also be adjusted on the [3] tab.
Before Use Basic Guide Accessories Advanced Guide Camera Basics Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately Auto Mode / Hybrid Auto Mode Other Shooting Modes System Map..................................................... 121 Optional Accessories..................................... 122 Power Supplies.................................................... 122 Flash Unit.............................................................
Before Use System Map Use of genuine Canon accessories is recommended. Included Accessories Wrist Strap Battery Charger CB-2LY/CB-2LYE*1 Battery Pack NB-6LH*1 USB Cable (camera end: Mini-B)*2 Memory Card Power Card Reader HDMI Cable (camera end: Type D)*3 Cables AC Adapter Kit ACK-DC40 Computer AV Cable AVC-DC400 Flash Unit C TV/Video System Canon-Brand PictBridgeCompatible Printers This product is designed to achieve excellent performance when used with genuine Canon accessories.
Before Use Optional Accessories The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available. Power Supplies zz Rechargeable lithium-ion battery Battery Charger CB-2LY/CB-2LYE zz Charger for Battery Pack NB-6LH • The battery pack includes a convenient cover which you can attach to know the charging status at a glance.
Printers Still Images Movies Still Images Movies Using Optional Accessories Canon-Brand PictBridgeCompatible Printers zz Printing images without a computer is possible by connecting the camera to a Canon-brand PictBridge-compatible printer. For details, visit your nearest Canon retailer. Playback on a TV Basic Guide Advanced Guide Camera Basics By connecting the camera to a TV, you can view your shots on the larger screen of the TV.
zz On the camera, open the terminal cover and insert the cable plug fully into the camera terminal. Still Images Movies Controlling the Camera with a TV Remote Connecting the camera to an HDMI CEC-compatible TV enables playback (including slideshow playback) using the TV remote control. Depending on the TV, you may need to adjust some TV settings. For details, refer to the TV manual. 1 Configure the setting. 3 Turn the TV on and switch to video input.
4 Control the camera with the TV remote. zz Press the buttons on the remote to browse images. zz To display the camera control panel, press the OK/Select button. Select control panel options by pressing the buttons to choose an option, and then pressing the OK/Select button again.
Before Use • Correct display is not possible unless the camera video output format (NTSC or PAL) matches the TV format. To change the video output format, press the button and choose [Video System] on the [3] tab. • When the camera and TV are connected, you can also shoot while previewing shots on the larger screen of the TV. To shoot, follow the same steps as when using the camera screen. However, AF-Point Zoom (= 36) is not available.
Using the Software The software available for download from the Canon website is introduced below, with instructions for installation and saving images to a computer. Software After downloading the software from the Canon website and installing it, you can do the following things on your computer. zz Import images and change camera settings ImageBrowser EX Basic Guide Advanced Guide Checking Your Computer Environment The software can be used on the following computers.
Before Use Saving Images to a Computer zz Choose [Downloads Images From Canon Camera] and then click [OK]. Windows 7 and Mac OS X 10.8 are used here for the sake of illustration. For other functions, refer to the help system of the relevant software (some software excluded). Advanced Guide Camera Basics 1 Connect the camera to the Auto Mode / Hybrid Auto Mode computer. zz With the camera turned off, open the zz Double-click [ cover ( ).
• Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the taskbar. • Windows Vista or XP: To start CameraWindow, click [Downloads Images From Canon Camera] on the screen displayed when you turn the camera on in step 2. If CameraWindow is not displayed, click the [Start] menu and choose [All Programs] ► [Canon Utilities] ► [CameraWindow] ► [CameraWindow]. • Mac OS: If CameraWindow is not displayed after step 2, click the [CameraWindow] icon in the Dock.
3 Turn the printer on. 4 Turn the camera on. Still Images Configuring Print Settings zz Press the <1> button to turn the camera 1 Access the printing screen. on. zz Follow steps 1 – 6 in “Easy Print” (= 129 – 130) to access the screen at left. 5 Choose an image. zz Press the buttons to choose an image. 6 Access the printing screen. zz Press the button, choose [c], and press the button again. 2 Configure the settings.
Still Images Cropping Images before Printing By cropping images before printing, you can print a desired image area instead of the entire image. Before Use • Cropping may not be possible at small image sizes, or at some aspect ratios. • Dates may not be printed correctly if you crop images shot with [Date Stamp ] selected. 1 Choose [Cropping]. Still Images zz After following step 1 in “Configuring Print Settings” (= 130) to access the printing screen, choose [Cropping] and press the button.
4 Choose a layout. Still Images zz Press the buttons to choose an option. zz When choosing [N-up], press the buttons to specify the number of images per sheet. zz Press the button. 5 Print the image. zz Following steps 1 – 4 in “Choosing Paper Size and Layout before Printing” (= 131 – 132), choose [ID Photo] and press the button. Y P O length. zz Press the buttons to choose Default Matches current printer settings.
Movies Printing Movie Scenes Still Images Adding Images to the Print List (DPOF) 1 Access the printing screen. zz Follow steps 1 – 6 in “Easy Print” (= 129 – 130) to choose a movie. The screen at left is displayed. 2 Choose a printing method. zz Press the buttons to choose [ ], and then press the buttons to choose the printing method. 3 Print the image. Batch printing (= 135) and ordering prints from a photo development service can be set up on the camera.
• Not all of your DPOF settings may be applied in printing by the printer or photo development service, in some cases. • [ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera. Changing the print settings using this camera may overwrite all previous settings. • Setting [Date] to [On] may cause some printers to print the date twice. • Specifying [Index] will prevent you from choosing [On] for both [Date] and [File No.
Still Images Setting Up Printing for All Images Still Images Printing Images Added to the Print List (DPOF) zz Following step 1 in “Setting Up Printing for Individual Images” (= 134), choose [Select All Images] and press the button. zz Press the buttons to choose [OK], and then press the button. Still Images Clearing All Images from the Print List zz Following step 1 in “Setting Up Printing for Individual Images” (= 134), choose [Clear All Selections] and press the button.
• [ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera. Changing the print settings using this camera may overwrite all previous settings. • After importing images to your computer, also refer to “Software Instruction Manual” (= 127) and the printer manual for further information. Still Images Adding Images Individually 1 Choose [Select].
Before Use Basic Guide Appendix Advanced Guide Camera Basics Helpful information when using the camera Auto Mode / Hybrid Auto Mode Other Shooting Modes Troubleshooting.............................................. 138 On-Screen Messages...................................... 141 On-Screen Information................................... 144 Shooting (Information Display)............................. 144 Playback (Detailed Information Display).............. 145 Y P O Functions and Menu Tables.........
Shooting Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Power • Confirm that the battery pack is charged (= 10). • Confirm that the battery pack is inserted facing the correct way (= 11). Strange display on the screen under low light (= 19). Strange display on the screen when shooting. Y P O No date stamp is added to images.
No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway. • To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered before you press the shutter button halfway. Otherwise, try pressing the shutter button halfway repeatedly. Subjects in shots look too dark. Recording to the memory card takes too long, or continuous shooting is slower.
Before Use Playback Wi-Fi Playback is not possible. Cannot access the Wi-Fi menu by pressing the button. Basic Guide • Image or movie playback may not be possible if a computer is used to rename files or alter the folder structure. Refer to “Software Instruction Manual” (= 127) for details on folder structure and file names. • The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try again. Advanced Guide Playback stops, or audio skips.
Cannot send images. • The destination device has insufficient storage space. Increase the storage space on the destination device and resend the images. • The write-protect tab of the memory card in the destination camera is set to the locked position. Slide the write-protect tab to the unlocked position.
Before Use Cannot magnify!/Cannot play back this content in Smart Shuffle/ Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to category/Unselectable image. A camera error was detected (error number) • The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies.
Before Use IP address conflict Basic Guide • Reset the IP address so that it does not conflict with another. Disconnected/Receiving failed/Sending failed Advanced Guide • You may be in an environment where Wi-Fi signals are obstructed. • Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band.
On-Screen Information Date stamp (= 32) ISO speed (= 54) Grid lines (= 36) AE lock (= 53), FE lock (= 62) Shutter speed Time zone (= 115) Aperture value Shooting (Information Display) Exposure compensation level (= 52) Image stabilization (= 63) i-Contrast (= 54) Zoom bar (= 25) IS mode icon (= 29) Y P O * In [ Blink detection (= 37) Hybrid Auto mode (= 27) Exposure compensation bar (= 52) C Focusing range (= 57), AF lock (= 61) Shooting mode (= 146),
Playback (Detailed Information Display) Still images: Resolution (= 155) Movies: Playback time (= 156) Protection (= 73) Favorites (= 79) My Colors (= 56, 81), Creative Shot effect (= 44) Red-eye correction (= 35, 82) Shooting date/time (= 12) • Some information may not be displayed when viewing images on a TV (= 123).
Before Use Functions and Menu Tables Basic Guide Functions Available in Each Shooting Mode Advanced Guide Shooting Mode Function Exposure Compensation (= 52) Flash (= 61) h Z ! AE Lock/FE Lock (= 53, 62)*2 AF Lock (= 61) Focusing Range (= 57) e u Tracking AF Subject Selection (= 58) Screen Display (= 19) No Information Display Information Display *1 Not available, but switches to [Z] in some cases. *2 FE lock not available in [!] flash mode.
Before Use FUNC.
Before Use Shooting Mode 4 Function Still Image Aspect Ratio (= 34) Resolution (= 34) G I t N Basic Guide Advanced Guide – – O O O O O O – – – – *1 – O O O O O O Camera Basics O – O – O O O O O O – – O – – O – O – – O – O – Auto Mode / Hybrid Auto Mode O – O – O O – O – O O – O – O O – O – – – – – – – – O – O – O – Other Shooting Modes – – O O O O O O O – – – – – – – O O O P Mode Playback Mode Compression (= 6
Before Use 4 Shooting Tab Menu Basic Guide Shooting Mode 4 G I Function AF Frame (= 58) Face AiAF*1 Tracking AF Center O – – O – – O – – O O O O O O O – – O – – O – – O O O O – – O O O AF Frame Size (= 59)*2 Normal Small – – – – – – O O O O – – – – – – O O – – Digital Zoom (= 30) Standard Off 1.6x/2.
Before Use Shooting Mode Function AF-assist Beam (= 37) On Off 4 G I O O O O O O O O t N O O O O – O O Camera Basics O O O O – – – O O O Other Shooting Modes Playback Mode O O O O O O O O O O O – O O O O O O O O O O O O O O O – O O O O O O O O O O O O O O O O O O – – – O O O O O O – – – – – – O O O O O O O O O O O O O O i-Contrast (= 54) Auto Off O – O – O O – – – – – – – – – – – – O O O O O – – O O – – O O O O O O O
Before Use Shooting Mode Function Date Stamp 4 G I P t N (= 32) Basic Guide Advanced Guide Off Date/Date & Time O O O – O O O O O O O O O O O O O – O – O – O – O – O – O – O – O – O O O O O O Camera Basics Digest Type (= 27) Include Stills/No Stills O – – – – – – – – – – – – – – – – – – – Other Shooting Modes O Available or set automatically. – Not available.
3 Set Up Tab Menu Item Before Use 1 Playback Tab Menu Ref. Page Item Item Ref. Page Basic Guide Ref. Page Item Ref.
Handling Precautions Playback Mode FUNC. Menu Item Ref. Page Item Ref. Page Rotate = 78 Play Movie = 66 Protect = 73 Play Linked Digest Movie = 68 Favorites = 79 Smart Shuffle = 72 Erase = 76 Image Search = 69 Print = 130 Slideshow = 71 Group Playback = 70 C • The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact.
Before Use Specifications Wi-Fi Standards IEEE 802.11b/g/n* * 2.4 GHz band only 18x zoom: 4.5 (W) – 81.0 (T) mm (35mm film equivalent: 25 (W) – 450 (T) mm) Transmission Methods OFDM modulation (IEEE 802.11g/n) DSSS modulation (IEEE 802.11b) LCD Monitor 3.0-type color TFT LCD Effective Pixels: Approx. 461,000 dots Communication Modes Infrastructure mode*1, Ad hoc mode*2 *1 Supports Wi-Fi Protected Setup *2 Wi-Fi Certified IBSS File Format Design rule for Camera File system, DPOF (version 1.
Before Use Number of Shots/Recording Time, Playback Time Number of Shots Eco Mode On Movie Recording Time*1 Continuous Shooting*2 Playback Time Number of 4:3 Shots per Memory Card Approx. 290 Recording Pixels Approx. 430 Compression Ratio Approx. 1 hour Approx. 1 hour, 30 minutes Approx. 5 hours *1 Time under default camera settings, when normal operations are performed, such as shooting, pausing, turning the camera on and off, and zooming.
Before Use Recording Time per Memory Card Shooting Range Recording Time per Memory Card Image Quality 8 GB 32 GB 34 min. 38 sec. 2 hr. 19 min. 58 sec. 2 hr. 00 min. 15 sec. 8 hr. 05 min. 48 sec. 4 hr. 15 min. 32 sec. 17 hr. 12 min. 20 sec. • The values in the table are based on Canon measurement conditions and may change depending on the subject, memory card and camera settings.
Before Use Battery Pack NB-6LH Basic Guide Type: Rechargeable lithium-ion battery 3.7 V DC Nominal Voltage: Nominal Capacity: 1060 mAh Approx. 300 times Charging Cycles: Operating Temperatures: 0 – 40 °C (32 – 104 °F) Dimensions: 34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.) Approx. 22 g (approx. 0.78 oz.) Weight: Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes Battery Charger CB-2LY/CB-2LYE Rated Input: 100 – 240 V AC (50/60 Hz), 0.085 A (100 V) – 0.
Index A AC adapter kit............................. 122, 126 Accessories........................................ 122 AE lock................................................. 53 AF frames............................................. 58 AF lock................................................. 61 Aspect ratio.......................................... 34 AUTO mode (shooting mode)......... 14, 25 AV cable..................................... 122, 125 B Batteries → Date/time (date/time battery) Battery charger..
L Lamp.............................................. 37, 38 Long shutter (shooting mode).............. 49 Low light (shooting mode).................... 41 M Macro (focusing range)........................ 57 Magnified display.................................. 71 Memory cards......................................... 2 Recording time............................. 156 Menu Basic operations............................. 21 Table............................................. 146 Metering method.....................
• When transferring this product to another person, disposing of it, or sending it for repair, be sure to note the wireless LAN settings and reset the product to its default settings (erase settings) if necessary. Wi-Fi (Wireless LAN) Precautions • The camera’s model number is PC2071/ PC2074/PC2050 (including WLAN module model WM223). To identify your model, check the label on the bottom of the camera for a number beginning with PC.
Before Use Security Precautions Because Wi-Fi uses radio waves to transmit signals, security precautions more stringent than when using a LAN cable are required. Keep the following points in mind when using Wi-Fi. • Only use networks you are authorized to use. This product searches for Wi-Fi networks in the vicinity and displays the results on the screen. Networks you are not authorized to use (unknown networks) may also be displayed.
Before Use FCC/IC Notice Model: PC2071 (including WLAN Module Model WM223, FCC ID: AZD223) FCC Notice (Digital Camera, Model PC2071 systems) Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes C Y P O • • • • P Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 162
Before Use Disclaimer • Unauthorized reproduction of this guide is prohibited. • All measurements based on Canon testing standards. • Information subject to change without notice, as are product specifications and appearance. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon cannot be held liable for any loss arising from the use of this product.