PowerShot SX720 HS Camera User Guide

125
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
4
Establish a connection with an
access point.
● Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (
=
121) or in steps 2 – 4
in “Connecting to Listed Access Points”
(
=
123).
5
Enter your e-mail address.
● Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an e-mail
address.
● Enter your e-mail address, press the
[
][ ] buttons or turn the [ ] dial
to choose [Next], and then press the
[ ] button.
6
Enter a four-digit number.
● Enter any four-digit number, press the
[ ][ ] buttons or turn the [ ] dial
to choose [Next], and then press the
[ ] button.
● You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
Registering CANON iMAGE GATEWAY
To link the camera and CANON iMAGE GATEWAY, add CANON iMAGE
GATEWAY as a destination Web service on the camera. By setting
this, an e-mail notication for Camera Web Link Settings will be sent,
so you must use the e-mail address that you use on your computer or
smartphone.
1
Access the Wi-Fi menu.
● Press the [ ] button.
● If the [Device Nickname] screen is
displayed, press the [
][ ] buttons or
turn the [ ] dial to choose [OK], and then
press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [ ], and then
press the [ ] button.
3
Consent to entering your e-mail
address.
● Read the displayed contents, press
the [ ][ ] buttons or turn the [ ] dial
to choose [I Agree], and then press the
[ ] button.