PowerShot SX740 HS Camera User Guide

91
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback
Wireless Features
Setting Menu
Accessories
Appendix
Sending Images to a Computer
Automatically
Images on the camera can be automatically sent to a computer connected
to an access point (also set up for camera Wi-Fi connections) when
the camera is within range, as when you bring the camera home after
shooting.
Connecting via Wi-Fi
1
Connect the computer to the access
point.
● Install Image Transfer Utility 2 on the
computer.
2
Start Image Transfer Utility 2.
3
In Image Transfer Utility 2, access
the pairing settings screen.
● The screen to set up pairing is shown
when you follow the instructions
displayed the rst time Image Transfer
Utility 2 starts up.
4
Choose the type of connection.
● Choose [ ] menu (
=
23) > [Wireless
communication settings] > [Wi-Fi settings]
> [Auto send images to computer].
● Choose [Auto send] > [Enable], and then
choose [OK].
● Choose [Connect with WPS], and then
choose [WPS (PBC mode)].
2
Press the button.
● Choose [ ].
3
Choose [Edit device information].
● Choose a smartphone.
4
Choose [Viewable imgs].
● Specify which images can be viewed.
● Remote live view shooting in Camera Connect is not possible
unless [Viewable imgs] is set to [All images].
Ending Wi-Fi Connections
● Choose [ ] menu (
=
23) > [Wireless
communication settings] > [Wi-Fi function]
> [Disconnect,exit].
● You can also disconnect by touching [x]
on the Camera Connect screen.