User Manual

Setting Description
[Check sum] or
[Error correction]
• [1D bar code]
Checksum information can be stored in the barcode to verify the barcode
is correct.
• [2D bar code]
There are four error correction levels used for QR codes. Each level adds
different amounts of "backup" data to the QR code. The selected level de-
pends on how much damage the QR code is expected, and hence how
much error correction may be required:
• Level L - up to 7% damage
• Level M - up to 15% damage
• Level Q - up to 25% damage
• Level H - up to 30% damage
Color and back-
ground color
You can configure the color of the barcode and the background color of the
frame.
Pages
Select the pages to which you want to add the frames:
• To select a page range: select a page in the structure view, press the <Shift> key, then select
another page.
• To select non-sequential pages: select a page in the structure view, press the <Ctrl> key, then
select several non-sequential pages.
Colors for the borders and the fill
1. Click [Edit] to select the border color of the frame.
2. You can define the line of the border.
Size and position of the frame
• You can define the width and height of the frame.
You can also change the size of the frame with your mouse in the [Preview] view.
• [Horizontal shift] / [Vertical shift]
You can define the exact position of the frame on the page(s).
You cannot rotate the frame.
Scale and position
1. You can scale the image or barcode within the frame:
2. • [None]
• [Fit to frame]
The barcode is scaled up or down to fit the frame.
• [Shrink to frame]
The barcode is scaled down if the barcode is larger than the frame. The barcode is not
scaled up.
Option [Keep ratio] enabled: The barcode is scaled relative to its original size.
3. Use the arrows or the central dot to position the image or barcode in the frame.
Add a text, image, or barcode frame
110
Chapter 5 - The [VDP] workspace
PRISMAprepare v7.1.1