User Manual

• [Octavo signature book]: eight pages are imposed on each side of a sheet of paper. When each

sheet is folded twice, a booklet is generated.

• [Quarto signature book]: four pages are imposed on each side of a sheet of paper. When each

sheet is folded three times, a booklet is generated.

[Signature book] is applied to all pages in the document.

Color

Setting Description

[Saturation] Saturation is the hue of a color relative to its own brightness. The

hue is the difference between a color and a gray background.

With this setting, you can add more or less color to the image.

[Brightness] Brightness is determined by the amount of light that is reflected

by a color.

With this setting, you can make the image lighter or darker.

[Grayscale] Grayscale images are also known as black-and-white images.

Such images are composed exclusively of shades of gray, varying

from black at the lowest intensity to white at the highest.

[RGB] The RGB color model is an additive color model in which red,

green, and blue are added together in various ways to reproduce a

broad array of colors.

[CMYK] The CMYK color model is a subtractive color model in which cyan,

magenta, yellow and key black are used in various ways to repro-

duce a broad array of colors.

[Color pre-set]

A color pre-set is a collection of color and quality settings that matches a specific document type,

workflow or color application. A color pre-set is defined at the print server and available at the

printer driver. Use the Settings Editor of the print server to create new color pre-sets. Use this

setting to print with an optimal print quality.

[Gatefold]

In a [Gatefold] there is one sheet folded in 8 panels. The left and right edges fold inward with

parallel folds and meet in the middle of the sheet without overlapping. The sheet is then folded

again along a fold in the middle of the sheet. Each side of a sheet is a PDF page.

To allow the panels to nest inside each other properly, the outer panels are usually slightly

smaller than the inner panels. The outer panels fold in to the middle and cover the inner panels.

List of concepts

Chapter 1 - Introduction

PRISMAprepare v7.1.1