User Manual

Booklet
Setting Description
[Binding edge] The position of the binding edge determines how the pages are printed
on the paper. You can select the following options:
• [Left]
The document will be printed so that the pages of the produced
document will turn over the left side of the paper.
• [Top]
The job will be printed so that the pages of the produced document
will turn over the top side of the paper.
• [Right]
The job will be printed so that the pages of the produced document
will turn over the right side of the paper.
[Tab ordering] Define the order of the tabs.
The available values for this option depend on the selected [Binding
edge].
The [Tab ordering] option is valid for tabs and [Bleed tabs].
[Finisher] Select the intended finisher for this document. By selecting the inten-
ded finisher you can improve the preview of your document. In the
[Production] workspace, you decide to which finisher you send your
document.
[Staple] Select the staple pattern for the spine of the booklet.
[Page size] Define the [Page size]:
• Use [Keep page size] to keep the current page size for all pages with
the booklet layout. This means that if your current page size is A4,
each page within your booklet layout will be A4. In this case A3
sheets are used when you print the booklet document.
You have an A3 sheet, if "include spine with" is not checked; other-
wise the sheet is larger.
• Use [Reduce page size] to resize the pages. This means that if your
current page size is A4, each page within your booklet layout will be-
come A5. In this case A4 sheets are used when you print the booklet
document.
4
Define the document type
Chapter 6 - The [Document] workspace
141
PRISMAprepare v7.1.1