User Manual

Setting Description
[Cover] This option brings up another dialog window.
You can select the following options:
• [Included in current document]
The cover is defined in the current document.
• [From file]
The cover is not defined in the current document. The [Browse] but-
ton is enabled. You can browse to a file which contains a cover.
• [The cover has already been created]
The document already contains a cover. The cover consists of the
first and last page of the document.
• [The cover must be created]
The application creates a cover using the first two pages and the last
two pages of the document.
• [Print on both sides]
Print both the inside and the outside of the cover.
• [Print back cover]
You can choose to print the back cover, or only the front cover.
[Media size]
[Include spine width] allows you to include the spine width in the me-
dia size.
Particular case: booklet with cover already created: the media size of
the cover is used as reference size for all the pages in the document.
Multi-booklet
Setting Description
[Binding edge] The position of the binding edge determines how the pages are printed
on the paper. You can select the following options:
• [Left]
The document will be printed so that the pages of the produced
document will turn over the left side of the paper.
• [Top]
The job will be printed so that the pages of the produced document
will turn over the top side of the paper.
• [Right]
The job will be printed so that the pages of the produced document
will turn over the right side of the paper.
[Tab ordering] Define the order of the tabs.
The available values for this option depend on the selected [Binding
edge].
The [Tab ordering] option is valid for tabs and [Bleed tabs].
[Finisher] Select the intended finisher for this document. By selecting the inten-
ded finisher you can improve the preview of your document. In the
[Production] workspace, you decide to which finisher you send your
document.
[Staple] Select the staple pattern for the spine of the booklet.
4
Define the document type
142
Chapter 6 - The [Document] workspace
PRISMAprepare v7.1.1