User Manual

Setting Description
[Tab ordering] Define the order of the tabs.
The available values for this option depend on the selected [Binding
edge].
The [Tab ordering] option is valid for tabs and [Bleed tabs].
[Finisher] Select the intended finisher for this document. By selecting the inten-
ded finisher you can improve the preview of your document. In the
[Production] workspace, you decide to which finisher you send your
document.
[Cover] This option brings up another dialog window.
You can select the following options:
• [Included in current document]
The cover is defined in the current document.
• [From file]
The cover is not defined in the current document. The [Browse] but-
ton is enabled. You can browse to a file which contains a cover.
• [The cover has already been created]
The document already contains a cover. The cover consists of the
first and last page of the document.
• [The cover must be created]
The application creates a cover using the first two pages and the last
two pages of the document.
• [Print on both sides]
Print both the inside and the outside of the cover.
• [Print back cover]
You can choose to print the back cover, or only the front cover.
[Unprinted area]
The spine area and the hinge side glue area must remain free of ink
and toner. The unprinted area on the first and last page of the book
block is the hinge side glue area. This area receives only glue to ensure
a good adhesion between the book block and the cover.
Cover
Setting Description
[Binding edge] The position of the binding edge determines how the pages are printed
on the paper. You can select the following options:
• [Left]
The document will be printed so that the pages of the produced
document will turn over the left side of the paper.
• [Top]
The job will be printed so that the pages of the produced document
will turn over the top side of the paper.
• [Right]
The job will be printed so that the pages of the produced document
will turn over the right side of the paper.
4
Define the document type
144
Chapter 6 - The [Document] workspace
PRISMAprepare v7.1.1