User Manual

[Enhanced color rendering]
Color rendering relates to the color appearance of printed color pages under a given light source.
You can select:
• [Printer default]
Use the color rendering algorithm of the selected printer.
• [On]
Use the color rendering algorithm of this application.
• [Off]
Disable color rendering.
This setting is not available for all printer models.
[Color bar]
You can add a color bar to the printed pages. The drop-down list contains the available color bars
of the selected printer. You can define the location and the alignment of the color bar.
This setting is not available for all printer models.
[Information bar]
You can add an information bar to the printed pages. The drop-down list contains the available
information bars of the selected printer. You can define the location and the alignment of the
information bar.
This setting is not available for all printer models.
[Trapping pre-sets]
Printer misregistration can cause gaps between colors on the printed pages. You can enable
trapping to compensate for potential gaps between colors. A trapping preset is a collection of
trap settings you can apply to pages in a PDF. The drop-down list contains the available [Trapping
pre-sets] of the selected printer.
This setting is not available for all printer models.
[Image smoothing]
[Image smoothing] blends adjacent colors in an image to make color transitions less noticeable.
Use this setting when the printer resolution is higher than the image resolution.
This setting is not available for all printer models.
[Fattening]
You can apply [Fattening] to the text and lines of the document. The fattening function can
increase the readability of texts with small fonts (< 6 points, 6/72 inch). However, when you print
special data such as barcodes, fattening can make barcodes difficult to read. Therefore, you can
turn the fattening function off when you print such special data. You can select:
• [Printer default]
Use the fattening algorithm of the selected printer.
• [On]
Use the fattening algorithm of this application.
• [Off]
Disable fattening.
This setting is not available for all printer models.
Define the [Image] settings
Chapter 7 - The [Production] workspace
169
PRISMAprepare v7.1.1