User Manual

Setting Description
/VDPL <VDPDataFile> Use parameter '/VDPL' to define the path and the name of the
[VDP] data file for variable data documents. The path and the
name must be enclosed between double quotes. For example: "C:
\My Folder\My VDP data file.xml".
• With parameter '/VDPS':
The data source file defined with parameter '/VDPS' is used in-
stead of the data source file defined in the [VDP] data.
• With parameter '/T':
The [VDP] data is applied to the document before the tem-
plate(s) are applied.
/VDPV Use parameter '/VDPV' to validate the [VDP] data. Parameter '/
VDPV' is applied only after the other [VDP] parameters have been
applied.
/T Use parameter '/T' to apply one or more automation templates to
the job. The templates are applied in the defined order. The tem-
plates must be separated by a "|". The template names are case
sensitive.
For example: /T "<Template1>|<Template2>|<Template3>".
The following limitations to parameter '/T' apply:
• Parameter '/T' is used and none of the template(s) contain a
print action:
The job is not printed, not even when the parameters '/C' and/or
'/P' are used.
• Parameter '/T' is used and one or more template(s) contain a
print action:
The parameter '/C' overrules the number of copies that is de-
fined in the template(s).
The parameter '/P' overrules the printer that is defined in the
template(s).
If parameter '/T' and parameter '/I' are used, the application opens.
The automation templates are executed in the application. You
must close the application to continue with the "PRISMApre-
pare.exe" command.
/P <printer name>
Define the printer that must be used to print.
The printer name must be enclosed between double quotes. For
example: /P "Oce 970C v2.1". The defined printer overrules the
printer which is saved in the job. If /P is not defined, the printer
which is saved in the job is used.
If parameter '/T' and parameter '/P' are used, the parameter '/P'
overrules the printer that is defined in the template(s).
If parameter '/I' and parameter '/P' are used, the [Production]
workspace of the application opens. The printer that is defined by
parameter '/P' is selected in the [Production] workspace. You can
define the print settings. Click button [Print] to continue with the
"PRISMAprepare.exe" command.
NOTE
When you define a printer, part of the print settings can
be reset to the default values. This depends on the capa-
bilities of the printer.
4
The command line interface
192
Chapter 9 - The command line interface
PRISMAprepare v7.1.1