User Manual

Setting Description
/I Use parameter '/I' to open this application. You can edit the job in
the application.
Parameter '/I' can be used in combination with other parameters.
See the descriptions of the parameters for detailed information.
/Finishing Use parameter '/Finishing' to create a JDF finishing ticket for a
near-line finisher.
The parameter can be followed by the name of a finishing flow.
The name must be enclosed between double quotes. For example:
"name". If this parameter is used without the name of a finishing
flow, then the finisher as defined in the document is used. The fin-
isher as defined in the document is used even if a finishing flow
name is defined in the print settings or in an automation template.
This parameter must be used in combination with a print com-
mand, either '/P' or a print command recorded in an automation
template. This parameter is ignored if no print command is used.
The finishing flow name used in combination with this parameter
overwrites the finishing flow in the print settings and the automa-
tion templates.
Examples
• PRISMAprepare.exe "C:\Temp\10pages.pdf" /I
The application opens. You can edit the job.
• PRISMAprepare.exe "C:\Temp\10pages.pdf" /C 5 /I
The application opens. The [Production] workspace opens. The printer which is saved in the
job is selected. The number of copies is 5. Define the print settings and print the job.
• PRISMAprepare.exe "C:\Temp\10pages.pdf" /P "Oce 970C v2.1" /C 50
Print 50 copies of the document on the defined printer. Use the other print settings which are
saved in the PDF file.
• PRISMAprepare.exe "C:\Temp\10pages.pdf" /T "MonthlyReport|CiceroPrint" /P "Oce VP6250" /C
50
Apply the template "MonthlyReport" to the document. Then apply template "CiceroPrint" to the
document. Print 50 copies and use the defined printer. Do not use the printer and number of
copies defined in the templates.
• PRISMAprepare.exe "C:\Temp\10pages.pdf" /VDPL "C:\My Folder\My VDP data file.xml" /VDPV /I
The application opens. The [VDP] data stored in file "My VDP data file.xml" is applied to
document "10pages.pdf". The [VDP] data is validated. You can edit the job in the application.
The exit codes
Setting Description
0 Operation successful.
1 Execution error.
2 The file cannot be found.
3 The path cannot be found.
4 The file cannot be opened.
5 Access is denied.
111 The file name is too long.
4
The command line interface
196
Chapter 9 - The command line interface
PRISMAprepare v7.1.1