User Manual

Export the automation templates

You can export one or more templates from PRISMAprepare.

The data source and images must remain in the same location as they were when you exported

the VDP settings. If their location changes, the links to these variables become invalid in the XML

file.

1. Click [Tools] - [Automation templates] - [Export automation templates].

2. Select the template(s) that you want to export.

Enable option [Export all] to select all templates.

3. Click [Export].

4. Browse to the location where you want to save the file.

5. Enter a file name and click [Save].

The templates are saved in a zip file.

6. Close the [Export automation templates] dialog.

Import the automation templates

You can import templates into PRISMAprepare.

1. Click [Tools] - [Automation templates] - [Import automation templates].

2. Click [Browse...]. Browse to the templates file. The templates file is a zip file.

3. Select the zip file and click [Open].

4. You can select the following options:

• [Merge with the existing automation templates]

Merge the imported templates with the templates that are used by the application.

A template in the import file can have the same name as an existing template in the

application. You are asked if you want to keep or replace the existing template.

• [Replace the existing automation templates]

All templates of the application are deleted first. The imported templates are used by the

application.

5. Click [OK].

Export the automation templates

Chapter 2 - Configure the application

PRISMAprepare v7.1.1