Specifications

– 23 –

5. Measurements Stored in Memory [DISPLAY Mode]

In DISPLAY mode, you can see the results (maximum of 10 data for each eye) of measure-

ments stored in memory.

Press DISP switch in order to enter DISPLAY mode.

Press it again to go out.

[How to change the order of refraction]

Press IOL switch.

The order of data will change starting from larger number of SPH with + sign (i.e. from

stronger hyperopia) and ending with larger number with - sign (i.e. stronger myopia).

Press IOL switch again in order to return to the original order.

[[How to change vertex distance]

Press VD switch.

[[How to print the data in the condition displayed]

Press PRINT switch.

[How to delete all data]

NOTE: When data are deleted from DISPLAY Mode, they will also be deleted from

the measurement mode.

Press R/L switch. Confirmation meassage will appear.

Press START switch to delete, or PRINT switch to cancel.

– DISPLAY MODE –

RIGHT PD: 67 LEFT VD: 13.5

No. 00001

SPH CYL AX SPH CYL AX

1 –0.37 –0.75 37 –0.62 0.00 180

2 –0.50 –0.75 36 –0.75 0.00 180

3 –0.50 –0.75 36 –0.75 0.00 180

[ –0.50 –0.75 36 ] [ –0.75 0.00 180 ]

END

– – –

SORT

CLEAR

– – –

– – –– – –

– – –

Results of

refractometry

Standard value