Specifications

– 50 –
8. Installation
8.1 Installation
NOTES: 1. Do not install the instrument in a location with the conditions listed on page
(2).
2. Do not remove the cover for the RS232C connector on the bottom of the R-
F10. Please contact Canon representative or distributor when connecting any
instrument.
1
Turn OFF the power switch
2
Expose the bottom of the instrument
Lay the instrument on its side on a
table as illustrated so the bottom can
be seen.
NOTES: 1. The measurement head is positioned at the center when the instrument is
shipped from Canon. However, if it is positioned either on the right or left side,
lay the instrument on the side opposite the side from which the measurement
head is protruding. Otherwise, the measurement head will be damaged.
GNINRAW!
ylppusrewopfoepytehthtiwtnemurtsniehtetarepoylnO
roerifnitluseryamti,esiwrehtO.etalpgnitarehtnodetacidni
.kcohscirtcele
GNINRAW!
sihtnidetacidnisaselbacehttcennoc/tcennocsidoteruseB
pityamtitahtdnimniraebos,gk12shgiewtinuehT.launam
selbacehteldnahtonod,oslA.nekattonsieracreporpfirevo
tahtkcohscirtcelenategyamuoy,esiwrehtO.sdnahtewhtiw
.yrujnisuoiresrohtaednitluseryam
NOITUAC!
)eroc-eerht(epytgnidnuorgahtiwdeppihssitnemurtsnisihT
gulpsyawla,kcohscirtcelefoksirehtecuderoT.elbacrewop
.teltuorewopdednuorgaotnielbaceht