Specifications

– 52 –
8.2 Precauations when Moving the Instrument
8.2 Precautions when Moving the Instrument
NOTE: When the instrument is going to be transported by automobile, etc., it must be
protected against vibration and shocks. Contact Canon representative or distribu-
tor for advice on the procedure for packing it.
1
Move the measurement head to the center
Turn ON the power while pressing the START switch. Release the START switch
when you hear a beeping sound.
2
Turn OFF the power
Turn OFF the power switch.
3
Disconnect the cables
Lay the instrument in the same position as when connecting the power cable (→
section 8.1). After disconnecting all the cables, set the instrument upright again.
4
Carrying the instrument
Support the instrument by holding the sides at the base.
GNINRAW!
evomoteruseb,devomebotgniogsitnemurtsniehtnehW
rewopehtFFOnrut,retnecehtotdaehtnemerusaemeht
dna,teltuoCAehtmorfelbacrewopehtgulpnu,hctiws
ebyamelbaceht,esiwrehtO.selbacrehtotcennocsid
.kcohscirtceleroerifnitluseryamhcihw,degamad
ehttroppus,deirracebotgniogsitnemurtsniehtnehw,oslA
.yllatnozirohtidlohdnatnemurtsniehtfomottob
emocyamyehtsastraprehtorotserecafehtybtidlohtonoD
.yrujninignitluser,ffo
GNINRAW!
ebyamtnemurtsniehT.tnemurtsniehtpordrotihtonoD
roerifnitluseryamhcihw,tlojgnortsaseviecertifidegamad
gniebtituohtiwdesusitnemurtsniehtfikcohscirtcele
.deriaper