Multimedia Projector WUX10 MarkII User's Manual

93
Setting the Image Quality
Setting Up Functions from Menus
An Example of the Ambient Light Setting
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
• You can set this if you have selected
[Photo] for [Image mode].
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
You can enable or disable this mode also
with the LAMP button on the remote con-
trol.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The setting you have made is stored as
a setting value of input signals being
projected in an image mode.
Level L Select this if the ambient light
source is a light bulb or bulb color
fluorescent.
M Select this if the ambient light
source is a day white fluorescent.
H Select this if the ambient light
source is a daylight fluorescent.
Level Example Location
L A projection room, bar
M Photo studio, galley
H Conference room, lecture room
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Normal Projects an image at the normal bright-
ness level.
Quiet Reduces the lamp brightness and cool-
ing fan noise.
Lamp mode
Image adjustment