Multimedia Projector WUX10 MarkII User's Manual

99
Setting Various Function
Setting Up Functions from Menus
Turning on/off LED Illumination
[LED illumination]
You can select whether to enable or dis-
able the LED illumination (P28).
Press the OK button to accept your setting
and then press the MENU button.
• [On] is the factory default.
• LED illumination is unrelated to turning
on/off of the POWER or WARNING
lamp.
Extending the Menu Display Time
[Other settings] - [Menu display time]
You can extend the menu display time,
which is 30 seconds usually, to 3 minutes.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The following display and operation are
also changed.
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Off Disables the LED illumination.
On Enables the LED illumination.
LED illumination
System settings
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Normal The menu is displayed for 30 seconds.
Extended The menu is displayed for 3 minutes.
Item [Normal] [Extended]
The display time of the following
screens
• INPUT (P50)
• Zoom adjustment (P53)
• Focus adjustment (P54)
• Keystone adjustment (P55)
• Keystone reset (P56)
• D.image shift adjustment (P59, P60)
• D.image shift reset (P60)
• Aspect (P62)
• Image mode (P63)
• Volume adjustment (P67)
• Lamp mode (P93)
4 to 10
seconds
3
minutes
The pointer buttons holding
operation other than in [Zoom
adjustment] and [Focus adjustment].
Enabled Disabled
The VOL button holding operation.
The D.ZOOM button holding
operation.
Beep at end of [Auto setup] (P48)NoYes
Other settings
System settings
Menu display time