User's Manual

181
Completing Computer Settings
Installation and Maintenance Connecting to a Network
Setting Basic Information [Network]
From [Network] in the settings screen, you can log into the web screen and set
basic network information. For the setting procedure, refer to “Network Setting”
(P179).
Item Explanation Factory default setting
User name
When logging into the web
screen, enter the user name
in 1-byte alphanumeric
characters and symbols (4 -
15 characters).
root
New password
When logging into the web
screen, enter the password in
1-byte alphanumeric
characters and symbols (4 -
15 characters).
system
Confirm new password
For confirmation, enter the
same password that you
entered in [New password].
system
Item Explanation Factory default setting
MAC address Shows the projector’s MAC
address.
The MAC address of the
projector
DHCP Select whether to turn the
DHCP function on or off. If the
function is on, because the IP
address is acquired from the
server, it is not possible to
enter the [IP address],
[Subnet mask], and [Default
gateway].
OFF
IP address Enter the IP address of the
projector in 1-byte numbers.
192.168.254.254
Subnet mask Enter the subnet mask in 1-
byte numbers.
255.255.255.0
Default gateway Enter the default gateway IP
address in 1-byte numbers.
0.0.0.0