MULTIMEDIA PROJECTOR WUX450 / WX520 / WUX400ST / WX450ST User Commands © CANON INC.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Table of Contents Table of Contents ........................................................................................................ ii 1. Overview ................................................................................................................. 1 2. Communication Specifications................................................................................. 2 Communication Specifications ...........................................
WUX450 / WX520 / WUX400ST / WX450ST User Commands BLANK ................................................................................................................................................. 26 BRI ....................................................................................................................................................... 26 COLOR_TEMP ....................................................................................................................................
WUX450 / WX520 / WUX400ST / WX450ST User Commands 1. Overview These specifications describe the methods of controlling Projector WUX450 / WX520 / WUX400ST / WX450ST from PC or other controllers over an RS232C connection or LAN. Symbol The following symbols are used in these specifications: Symbol Description [] Data in [ ] can be omitted. | Same as OR.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 2. Communication Specifications Communication Specifications The projector can be controlled via RS-232C or LAN connection.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Usable Character Codes Use ASCII codes in the red and blue areas of below table. No distinction is made between double-byte characters and single-byte characters. Do not use double-byte or triple-byte characters. They will all be recognized as single-byte characters. Uppercase and lowercase alphabet letters are recognized as the same character.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Communication System (Serial) Item Specifications Communication system RS-232-C Start-stop synchronization Semi-duplex communication Transmission speed 19.2 Kbps Character length 8 bits / character Stop bit 2 bits Parity None Command format Variable-length records with terminals as delimiters Maximum transmission length Maximum of 256 characters (bytes) including delimiters. CR (0Dh) can be used as delimiter.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Response Format Responses are sent from the projector to PC in the following format: There are multiple response types, each having different format. Strings consisting of 1 or more alphanumeric letters First 2 digits are always 1 lowercase alphabet letter and a ":" (colon) The first character indicates the response type.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Reference command response A response when reference is made properly for a reference command.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Normal response (BUSY) This response is sent when a command cannot be received during processing. Format) i:BUSY Example) PC to PJ A U T O P C CR 41h 55h 54h 4Fh 50h 43h 0Dh PJ to PC i : B U S Y CR 69h 3Ah 42h 55h 53h 59h 0Dh Other Command recognition The receiver (projector) retains incoming characters within a specific Tc, and recognizes the data as "received command" when delimiter is received.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 3. Communication Flow Command Transmission (PC side) Commands should be sent from PC in a way that each character is sent within the specified Tc (inter-character timeout) Command Reception (projector side) The receiver (projector) retains incoming characters within a specific Tc, and recognizes the data as "received command" when delimiter is received.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 4.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Item Commands Setting Reference Description Power mode restriction SL1 SL3 ST ON - - Yes 36 HDMI_OVSCAN Yes Yes HDMI overscan setting 37 HUE Yes Yes Hue setting 38 IMAGE Yes Yes Image mode setting 39 IMAGEFLIP Yes Yes Flip display 40 INPUT Yes Yes Input selection - 41 KREP Yes Yes Key repeat - - - Yes 42 LAMP Yes Yes Lamp output setting - - - Yes - Yes Lamp ON time inquiry 44 LMPWRN Yes Yes Lamp warning
WUX450 / WX520 / WUX400ST / WX450ST User Commands 5. Guide to command description This section explains how commands are described. The command descriptions have the format shown below. EXAMPLE Summary of the function Format Setting Command A command format when a command is sent to the projector to make a setting for the function. "-" is shown when there is no setting command. Example) 6AXADJ=<6-axix adjustment parameter: ID> Response A response format for the setting command.
WUX450 / WX520 / WUX400ST / WX450ST User Commands Environment This defines the environments that support the command (power supply state, input signal state). The command is executable when the projector is in the mode indicated by "○" in the table of corresponding command description page.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6. Command Details 6AXADJ 6-axix adjustment / OFF Format Setting Reference Command 6AXADJ=<6-axix adjustment parameter: ID> Response i:OK Command GET=6AXADJ Response g:6AXADJ=<6-axix adjustment parameter: ID> Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6AXR 6-axis adjustment (red), hue/saturation/brightness Format Setting Reference Command 6AXR=,, Response i:OK Command GET=6AXR Response g:6AXR=,, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6AXG 6-axis adjustment (green), hue/saturation/brightness Format Setting Reference Command 6AXG=,, Response i:OK Command GET=6AXG Response g:6AXG=,, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6AXB 6-axis adjustment (blue), hue/saturation/brightness Format Setting Reference Command 6AXB=,, Response i:OK Command GET=6AXB Response g:6AXB=,, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6AXC 6-axis adjustment (cyan), hue/saturation/brightness Format Setting Reference Command 6AXC=,, Response i:OK Command GET=6AXC Response g:6AXC=,, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6AXM 6-axis adjustment (magenta), hue/saturation/brightness Format Setting Reference Command 6AXM=,, Response i:OK Command GET=6AXM Response g:6AXC=,, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 6AXY 6-axis adjustment (yellow), hue/saturation/brightness Format Setting Reference Command 6AXY=,, Response i:OK Command GET=6AXY Response g:6AXY=,, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands AMBADJ Ambient light adjustment / OFF Format Setting Reference Command AMBADJ= Response i:OK Command GET=AMBADJ Response g:AMBADJ= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands AMBTYPE Ambient light type setting Format Setting Reference Command AMBTYPE= Response i:OK Command GET=AMBTYPE Response g:AMBTYPE= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands ASELA2 Analog PC-2 Audio input terminal selection Format Setting Reference Command ASELA2= Response i:OK Command GET=ASELA2 Response g:ASELA2= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands ASELD Digital PC Audio input terminal selection Format Setting Reference Command ASELD= Response i:OK Command GET=ASELD Response g:ASELD= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands ASPECT Aspect ratio Format Setting Reference Command ASPECT= Response i:OK Command GET=ASPECT Response g:ASPECT= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands AUTOSETEXE Auto setup Format Setting Reference Command AUTOSETEXE= Response i:OK Command - Response Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands BLANK BLANK setting Format Setting Reference Command BLANK= Response i:OK Command GET=BLANK Response g:BLANK= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands COLOR_TEMP Color temperature Format Setting Reference Command COLOR_TEMP= Response i:OK Command GET=COLOR_TEMP Response g:COLOR_TEMP= Note: See "Error list" for any response other than the above. Setting values for are -17 to 21.
WUX450 / WX520 / WUX400ST / WX450ST User Commands CONT Contrast Format Setting Reference Command CONT= Response i:OK Command GET=CONT Response g:COMVER=" Note: See "Error list" for any response other than the above. Setting values for are -20 to 20.
WUX450 / WX520 / WUX400ST / WX450ST User Commands DZOOM_POS DZOOM position setting Format Setting Reference Command DZOOM_POS=, Response i:OK Command GET=DZOOM_POS Response g:DZOOM_POS=, Note: See "Error list" for any response other than the above. is a signed integer indicating the central position of the enlarged input image.
WUX450 / WX520 / WUX400ST / WX450ST User Commands DZOOM_RAT DZOOM ratio setting Format Setting Reference Command DZOOM_RAT= Response i:OK Command GET=DZOOM_RAT Response g: DZOOM_RAT= Note: See "Error list" for any response other than the above. < DZOOM ratio parameter:ID > Parameter Meaning 1 same size (DZOOM disabled) 1.5 1.
WUX450 / WX520 / WUX400ST / WX450ST User Commands ERR Error information reference Format Setting Reference Command - Response - Command GET=ERR Response g:ERR= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands FINE_GAMMA_R Fine gamma (R) adjustment Format Setting Reference Command FINE_GAMMA_R=,,・・・, Response i:OK Command GET=FINE_GAMMA_R Response g: FINE_GAMMA_R=,
WUX450 / WX520 / WUX400ST / WX450ST User Commands FINE_GAMMA_G Fine gamma (G) adjustment Format Setting Reference Command FINE_GAMMA_G=,,・・・, Response i:OK Command GET=FINE_GAMMA_G Response g: FINE_GAMMA_G=,
WUX450 / WX520 / WUX400ST / WX450ST User Commands FINE_GAMMA_B Fine gamma (B) adjustment Format Setting Reference Command FINE_GAMMA_B=,,・・・, Response i:OK Command GET=FINE_GAMMA_B Response g: FINE_GAMMA_B=,
WUX450 / WX520 / WUX400ST / WX450ST User Commands FLTWRN Air filter cleaning warning Format Setting Reference Command FLTWRN= Response i:OK Command GET=FLTWRN Response g: FLTWRN= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands GAMMA Gamma adjustment Format Setting Reference Command GAMMA= Response i:OK Command GET=GAMMA Response g: GAMMA= Note: See "Error list" for any response other than the above. Setting values for are -10 to 10.
WUX450 / WX520 / WUX400ST / WX450ST User Commands HDMI_OVSCAN HDMI overscan setting Format Setting Reference Command HDMI_OVSCAN= Response i:OK Command GET= HDMI_OVSCAN Response g: HDMI_OVSCAN= Note: See "Error list" for any response other than the above. < HDMI overscan setting parameter:ID > Parameter Meaning OFF Turns overscan to OFF ON Turns overscan to ON.
WUX450 / WX520 / WUX400ST / WX450ST User Commands IMAGE Image mode setting Format Setting Reference Command IMAGE= Response i:OK Command GET= IMAGE Response g: IMAGE= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands IMAGEFLIP Flip display Format Setting Reference Command IMAGEFLIP= Response i:OK Command GET=IMAGEFLIP Response g:IMAGEFLIP= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands KREP Key repeat Format Setting Reference Command KREP= Response i:OK Command GET=KREP Response g:KREP= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands LAMPCOUNTER Lamp counter reference Format Setting Reference Command - Response - Command GET=LAMPCOUNTER Response g:LAMPCOUNTER=" Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands MAIN Unit control panel emulation Format Setting Command Reference MAIN= Response i:OK Command - Response Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands MEMF Memory color adjustment (flesh) Format Setting Reference Command MEMF= Response i:OK Command GET=MEMF Response g:MEMF= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands MEMS Memory color adjustment (sky) Format Setting Reference Command MEMS= Response i:OK Command GET=MEMS Response g:MEMS= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands NR Noise reduction Format Setting Reference Command NR= Response i:OK Command GET=NR Response g:NR= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands POWER This controls the power supply Format Setting Reference Command POWER= Response i:OK Command GET=POWER Response g:POWER= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands PRODCODE Product name inquiry Format Setting Reference Command - Response - Command GET=PRODCODE Response g:PRODCODE=" Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands RC Remote control operation emulate Format Setting Reference Command RC= Response i:OK Command - Response Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands DZOOM_P DZOOM_P+REP DZOOM_M DZOOM_M+REP DZOOM + Button press start DZOOM - VOL_P VOL + VOL_P+REP VOL + VOL_M VOL - VOL_M+REP VOL - MUTE MUTE FN Fn IMAGE IMAGE FREEZE FREEZE BLANK BLANK GAMMA GAMMA SPLIT SPLIT ECO ECO *-REP - Button press start Button press start Button press start Button press ends ("2Ah," "2Dh," "52h," "45h," and "50h" in hexadecimal form) Remarks (1) (2) A parameter with '+REP' signifies "button press st
WUX450 / WX520 / WUX400ST / WX450ST User Commands RGBGAIN RGB gain adjustment Format Setting Reference Command RGBGAIN=,, Response i:OK Command GET=RGBGAIN Response g:RGBGAIN=,, Note: See "Error list" for any response other than the above. Setting values for are -60 to 60.
WUX450 / WX520 / WUX400ST / WX450ST User Commands ROMVER Firmware version inquiry Format Setting Reference Command - Response - Command GET=ROMVER Response g:ROMVER=" Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands SAVEIMGPROF User memory creation/storage/deletion -- user memory creation status Format Setting Reference Command SAVEIMGPROF= Response i:OK Command GET=SAVEIMGPROF Response g:SAVEIMGPROF=:,,,,' Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands SCRNASPECT Screen aspect setting Format Setting Reference Command SCRNASPECT= Response i:OK Command GET=SCRNASPECT Response g:SCRNASPECT= Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands SIGNAL_INFO Inquires about displayed signal information Format Setting Reference Command - Response - Command GET=SIGNAL_INFO Response g:SIGNAL_INFO=" Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands TEMP Temperature sensor value inquiry Format Setting Reference Command - Response - Command GET=TEMP Response g: TEMP=,,…, Note: See "Error list" for any response other than the above.
WUX450 / WX520 / WUX400ST / WX450ST User Commands TPTN Test pattern Format Setting Reference Command TPTN= Response i:OK Command GET=TPTN Response g:TPTN= Note: See "Error list" for any response other than the above. < Test pattern parameter: ID > Parameter Meaning OFF Turned off CB1 Color bar SSH1 Stair step H No.1 SSH2 Stair step H No.2 SSH3 Stair step H No.3 SSV1 Stair step V No.1 SSV2 Stair step V No.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 7. Error List Response Meaning Reaction The command was successfully processed. i:OK e:0002 INVALID_COMMAND The command was invalid (not Use a correct command or correct command defined), or the command format was format. incorrect. e:000A INVALID_PARAMETER Argument (parameter) of the command is invalid. Use a correct argument (parameter). e:F001 SYSTEM An internal error occurred.
WUX450 / WX520 / WUX400ST / WX450ST User Commands 8.