Projecting an Image in the DICOM SIM Mode

ManualsBrandsCanon ManualsProjectorREALiS WX6000 D Pro AV

Projector Monitoring Software Starter Guide

Step 1: To nd the default IP address of the REALiS

projector, PRESS the Menu button.

Step 2: PRESS the right-arrow button and scroll

over to the Information tab. Here is where

you will nd the projector’s default IP address.

NOTE: In order to change the projector’s IP

address, your computer’s IP address

must be in the same network as the

projector.

Step 3: Open up Internet Explorer and TYPE in the

projector’s default IP Address.

Step 4: The REALiS web page will open up.

TYPE in the following:

User Name: root (all lower case)

Password: system (all lower case)

Step 5: CLICK on the OK button.

Step 3

Step 4

Step 2

Step 5

Only works with REALiS Series Mark II and Mark II D projectors and Canon LV-Series projectors with a network port.

1. This is a EXAMPLE of how to use the Canon’s Projector Monitoring Software.

2. You will need to change the projector’s IP address to match your network settings.

3. Please make sure your computer meets the following System Requirements.

OPERATING SYSTEM Microsoft Windows XP Professional SP2 or later /

Microsoft Windows Vista Ultimate

CPU Intel Pentium 4 2.4 GHz or better

MEMORY 1 GB or more

.NET FRAMEWORK Windows XP: .NET Framework 2.0 SP1 or more /

Windows Vista : .NET Framework 3.0 or more

SUPPORTED LANGUAGES: English and Japanese

ACROBAT READER 7.0 or higher

Category Essential Requirements

DISCLAIMER

CHANGING THE IP ADDRESS ON REALiS PROJECTORS

Summary of content (6 pages)

PAGE 1
Projector Monitoring Software Starter Guide Only works with REALiS Series Mark II and Mark II D projectors and Canon LV-Series projectors with a network port. D DISCLAIMER 1. This is a EXAMPLE of how to use the Canon’s Projector Monitoring Software. 2. You will need to change the projector’s IP address to match your network settings. 3. Please make sure your computer meets the following System Requirements. Category OPERATING SYSTEM CPU MEMORY .
PAGE 2
Step 6: CLICK on the Settings button. Step 6 Step 7: CLICK on the TCP/IP tab. Step 8: Change the IP Address and Subnet Mask to a NEW IP Address within your network. TCP/IP Step 9 Step 8 TCP/IP Step 9: CLICK on the Apply button to apply and save changes. Step 7 SNMP II ENABLING SNMP First: Make sure the IP address on your computer is in the same network as the projector in order to change the projector’s IP address.
PAGE 3
III CHANGING THE IP ADDRESS ON LV-SERIES PROJECTORS Step 1: To find the default IP address on LV-projector, PRESS the Menu button. PRESS the right-arrow button and scroll over to the Reset tab. Step 1 Step 2 Step 2: Scroll down and SELECT Network settings, then PRESS the OK button. Step 3: Here is where you will find the default IP address for the LV-projector. Step 3 NOTE: In order to change the projector’s IP address, your computer’s IP address must be in the same network as the projector.
PAGE 4
IV REGISTERING / DISCOVERING REALiS PROJECTORS First: The following is an EXAMPLE on how to register and monitor Canon projectors using the Projector Monitoring Software. Step 1 REALiS SERIES PROJECTORS Step 1: DOUBLE-CLICK on the Projector Monitoring Software icon located on your desktop (or where ever you saved it). Step 2 Step 2: In the menu bar CLICK on the word Options, scroll down to Discovery settings and SELECT SNMP V1 ...
PAGE 5
V REGISTERING / DISCOVERING LV-SERIES PROJECTORS LV-SERIES PROJECTORS Step 1: CLICK on the Options tab, scroll down and to Discovery settings and SELECT LV-Series ... Step 1 Step 2: In the IP address tab, CLICK on the New button. Step 3: TYPE in the previously set IP address of the LV-Projector. Step 2 Step 3 Step 4 Step 4: CLICK on the OK button(s) to save settings.
PAGE 6
VII OPTIONAL: PROJECTOR STATUS INTERVAL Step 1: CLICK on the Options tab, scroll down and SELECT Polling intervals. Step 2: Polling Intervals allows the user to Get projector status and Discover projector status during different time intervals 1. Get projector status every: allows the user to SELECT a polling interval for receiving status of the projector. 2. Discover projectors every allows the user to SELECT a polling interval for discovering new projectors.