C Y P O Basic Instruction Manual This basic manual covers only the most basic operations. For other features and more details, see the Camera Instruction Manual pdf file in the CD-ROM.
Introduction The EOS REBEL T3/1100D is a high-performance, digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 12.2 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF, approx. 3 fps continuous shooting, Live View shooting, and HighDefinition (HD) movie shooting. The camera is highly responsive for shooting at anytime, provides many functions fitted for advanced shooting, and offers many other features.
Instruction Manuals This Basic Instruction Manual only explains the camera’s basic operations and functions. For more detailed instructions, advanced shooting and playback procedures, printing photos, Custom Functions, and more, see the Camera Instruction Manual CD-ROM. The EOS REBEL T3/EOS 1100D’s instruction manuals consist of the following: Camera Instruction Manual CD-ROM Contents Camera Instruction (PDF file) Manual Explains all the camera’s functions and operation procedures.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys. <0> : Indicates the setting button. 0, 9, 7, 8 : Indicates that the respective function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of the button. * In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Contents Introduction 2 Instruction Manuals ........................................................................................... 3 Item Check List.................................................................................................. 4 Conventions Used in this Manual ...................................................................... 5 Handling Precautions ........................................................................................ 8 Quick Start Guide .....................
Contents 3 Shooting with the LCD Monitor (Live View Shooting) 55 A Shooting with the LCD Monitor ..................................................................56 Changing the Autofocus Mode.........................................................................59 MF: Focusing Manually ....................................................................................64 4 Shooting Movies 5 Image Playback 65 k Shooting Movies ....................................................................
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide 1 Insert the battery. (p.22) 2 Insert the card. (p.22) 3 4 5 10 To charge the battery, see page 20. With the card’s label facing toward the camera back, insert it into the slot. White index Red index Y P O Attach the lens. (p.29) C Align the lens’ white or red index with the camera’s index in the matching color. Set the lens focus mode switch to . (p.29) Set the power switch to <1>. (p.25) When the LCD monitor displays the Date/Time setting screen, see page 27.
Quick Start Guide 6 Set the Mode Dial to <1> (Full Auto). (p.42) 7 Focus the subject. (p.33) 8 9 All the necessary camera settings will be set automatically. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. If necessary, the built-in flash will pop-up automatically. C Y P O Take the picture. (p.33) Press the shutter button completely to take the picture. Review the picture.
Nomenclature Built-in flash/AF-assist beam Mode Dial (p.16) Power switch (p.25) EF Lens mount index (p.29) EF-S Lens mount index (p.29) Flash button Flash-sync contacts Hot shoe <6> Main Dial Focal plane mark (p.51) Shutter button (p.33) Strap mount (p.19) Red-eye reduction/ Self-timer lamp Grip Mirror C Y P O Contacts (p.9) Microphone (p.66) Terminal cover Lens release button (p.30) Lens mount Lens lock pin Remote control terminal Digital terminal Body cap (p.
Nomenclature Aperture/Exposure compensation button/ Erase button Display button (p.38,58,67,70) AE lock/ FE lock button/Index/ Reduce button Dioptric adjustment knob (p.32) Eyecup Viewfinder eyepiece LCD monitor (p.34) Live View shooting/ Movie shooting button (p.56/66) C AF point selection button/ Magnify button Speaker (p.71) Y P O Quick Control button/ Direct print button (p.54) Tripod socket DC cord hole Card/Battery compartment cover (p.22) Access lamp (p.
Nomenclature Shooting Settings Display c Main Dial pointer Shutter speed Aperture Shooting mode Exposure level indicator Exposure compensation amount Auto Lighting Optimizer ISO speed Highlight tone priority y Flash exposure compensation 0 External flash exposure compensation AEB range Picture Style AF mode X One-Shot AF 9 AI Focus AF Z AI Servo AF g Manual Focusing Quick Control icon (p.
Nomenclature Viewfinder Information AF point activation indicator < > AF points Focusing screen ISO speed AE lock/ AEB in-progress Flash-ready Improper FE lock warning C Y P O <2> White balance correction Focus confirmation light Max.
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and the Movie shooting mode. Creative Zone (→ ) These modes give you more control for shooting various subjects. d : Program AE s : Shutter-priority AE f : Aperture-priority AE a : Manual exposure 8: Automatic depth-of-field AE Basic Zone C Y P O All you do is press the shutter button. The camera sets everything to suit the subject. 1: Full Auto (p.42) 7: Flash Off (p.45) C: Creative Auto (p.
Nomenclature Lens Lens without a distance scale Focus mode switch (p.29) Focusing ring (p.64) Zoom ring (p.30) Zoom position index (p.30) Hood mount Filter thread (front of lens) Y P O Image Stabilizer switch (p.31) Contacts (p.9) Lens mount index (p.
Nomenclature Battery Charger LC-E10 Charger for Battery Pack LP-E10 (p.20). Power plug Charge lamp Full-charge lamp Battery pack slot Battery Charger LC-E10E Charger for Battery Pack LP-E10 (p.20).
Getting Started Y P O This chapter explains preparatory steps before you start shooting and basic camera operations. C Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap (→ ).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E10 the battery. 3 Recharge For LC-E10 Y P O As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its power. After recharging the battery, detach it and unplug the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully-charged Battery Pack LP-E10 into the camera. The card (sold separately) can be an SD, SDHC, or SDXC memory card. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Battery/Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the battery Y P O contacts.
Installing and Removing the Battery and Card After opening the card/battery compartment cover, be careful not to push it back further. Otherwise, the hinge might break. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [1 Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (→ ). Removing the Battery/Card the power switch to <2>. 1 Set (p.25) the cover.
Installing and Removing the Battery and Card When the access lamp is lit or blinking, it indicates that images are being written to or read by the card, being erased, or data is being transferred. When the access lamp is lit or blinking, do not open the card/battery compartment cover and never do any of the following. Otherwise, the image data may be destroyed or the card or camera may be damaged. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Turning on the Power If the date/time setting screen appears when you turn on the power switch, see page 27 to set the date/time. <1> : The camera turns on. <2> : The camera turns off and does not operate. Set to this position when not using the camera. 3 About Auto Power Off To save battery power, the camera turns off automatically after about 30 seconds of non-operation. To turn on the camera again, just press the shutter button halfway (p.33).
Turning on the Power z Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is less than half full. c : Battery will be exhausted soon. (Blinks) n : Battery must be recharged. Battery Life Y P O Temperature At 23°C / 73°F At 0°C / 32°F No Flash Approx. 800 shots Approx. 750 shots 50% Flash Use Approx. 700 shots C Approx.
3 Setting the Date and Time When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this date/time setting. Be sure to set the correct date/time. 1 Display the menu screen. Press the button to display the menu screen. the [6] tab, select [Date/ 2 Under Time]. Y P C3 O Press the key to select the [6] tab.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [6] tab, select 2 Under [LanguageK]. Press the key to select the [6] tab. Press the key to select [LanguageK] (the fourth item from the top), then press <0>. C Y P O the desired language. 3 SetPress the key to select the language, then press <0>. X The interface language will change.
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’ red or white index with White index the camera’s index matching the same color. Turn the lens as shown by the arrow until it snaps in place. Red index Y P O the lens, set the focus mode 3 On switch to (autofocus). C If it is set to (manual focus), autofocus will not operate. 4 Remove the front lens cap.
Attaching and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrows. Y P O Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. C Do not look at the sun directly through any lens.
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS II lens as an example. * IS stands for Image Stabilizer. 1 Set the IS switch to <1>. Set also the camera’s power switch to <1>. the shutter button halfway. 2 Press X The Image Stabilizer will operate. the picture.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right until the nine AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera Y P O To obtain sharp images, hold the camera still to minimize camera shake. C Horizontal shooting Vertical shooting 1.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off.
3 Menu Operations With menus, you can set various functions such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the button, cross keys, and <0> button on the camera back to operate the menus. <0> button Cross keys LCD monitor button Menu Screen Y P O In the Basic Zone, Movie shooting mode, and Creative Zone, the tabs and menu options displayed will be different.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Press the key to select a menu tab. the desired item. 3 Select Press the key to select the item, then press <0>. Y P O the setting. 4 Select Press the or key to C select the desired setting. (Some settings require you to press either the or key to select it.) The current setting is indicated in blue. the desired setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a computer, etc., before formatting the card. 1 Select [Format]. Under the [5] tab, select [Format], then press <0>. Y P O the card. 2 Format Select [OK], then press <0>.
3 Formatting the Card Execute [Format] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (→ ). About Low-level Formatting Do low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase all data in the card.
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Settings When you turn on the power switch, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
Feature Guide The Feature guide is a simple description of the respective function or option. It is displayed when you change the shooting mode or use the Quick Control screen to set a shooting function, Live View shooting, movie shooting, or playback. When you select a function or option on the Quick Control screen, the Feature guide description is displayed. The Feature guide turns off when you further proceed with any operation.
C 40 Y P O
Basic Shooting Y P O This chapter explains how to use the Basic Zone modes on the Mode Dial for best results. With Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.54). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in fully-automatic modes.
1 Fully Automatic Shooting 1 AF point Set the Mode Dial to <1>. any AF point over the 2 Aim subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier. the subject. 3 Focus Press the shutter button halfway, and Y P O the lens focusing ring will rotate to focus. X The dot inside the AF point achieving focus flashes briefly in red.
1 Fully Automatic Shooting FAQ The focus confirmation light blinks and focus is not achieved. Aim the AF point over an area having good contrast, then press the shutter button halfway (p.33). If you are too close to the subject, move away and try again. Sometimes multiple AF points flash simultaneously. This indicates that focus has been achieved at all those AF points. When the AF point covering the desired subject flashes, take the picture. The beeper continues to beep softly.
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called “focus lock”. Focus lock is also possible in other Basic Zone modes (except <5> Sports).
7 Disabling Flash In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips C Y P O Prevent camera shake if the numeric display in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting Unlike the <1> Full Auto mode where the camera sets everything, the Creative Auto mode enables you to easily change the depth of field, drive mode, and flash firing. You can also choose the ambience you want to convey in your images. The default setting is the same as the <1> (Full Auto) mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button. (7) 2 Press X The Quick Control screen will appear. 3 Y P O Set the desired function.
C Creative Auto Shooting (1) Shutter speed Aperture ISO speed (2) (3) Battery check Possible shots Image-recording quality Pressing the button enables you to set the following: Y P O (1) Shoot by ambience selection You can set the ambience you want to convey in your images. Press the key or turn the <6> dial to select the desired ambience. You can also select it from a list by pressing <0>. For details, see the Camera Instruction Manual CD-ROM.
C Creative Auto Shooting (3)Drive mode/Flash firing When you press <0>, the drive mode or flash firing setting screens will appear. Set as desired, then press <0> to finalize the setting and return to the Quick Control screen. Drive mode: Press the key or turn the <6> dial to set it as desired. Single shooting : Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to about 3 shots per sec.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and the hair look softer than with the <1> (Full Auto) mode. Shooting Tips C Y P O The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better in front of a plain, dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and the image sharper than with <1> (Full Auto). Shooting Tips C Y P O With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. Shooting night scenes.
4 Shooting Close-ups When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips C Y P O Use a simple background. A simple background makes the flower, etc., stand out better. Move to the subject as close as possible. Check the lens for its minimum focusing distance. Some lenses have indications such as <40.25m/0.8ft>.
5 Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Shooting Tips C Y P O Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly.
6 Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Shooting Tips C Y P O Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Keep the person within 5 meters/16.4 feet from the camera. Under low light, the built-in flash will fire automatically to obtain a good exposure of the person.
Q Quick Control In Basic Zone modes when the shooting settings screen is displayed, you can press the button to display the Quick Control screen. The table below indicates the functions that can be set with the Quick Control screen in each Basic Zone mode. Example: Portrait mode 1 Set the Mode Dial to a Basic Zone mode. 2 Press the button. (7) X The Quick Control screen will appear. 3 Set the function. Y P O Press the key to select a function. (Step not necessary in the 1/7 mode.
Shooting with the LCD Monitor (Live View Shooting) Y P O You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF mode (p.59-63). Y P O the picture. 3 TakePress the shutter button completely. X The picture will be taken and the C captured image is displayed on the LCD monitor.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, [Live View shoot.] will be displayed under [2], and in Creative Zone modes, it will be displayed under [z]. Battery Life with Live View Shooting [Approx.
A Shooting with the LCD Monitor About the Information Display Each time you press the button, the information display will change.
Changing the Autofocus Mode Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.60), and [Quick mode] (p.62). If you want to achieve precise focus, set the lens focus mode switch to , magnify the image, and focus manually (p.64). Select the AF mode. Under the [z] tab, select [AF mode]. Select the desired AF mode, then press <0>. While the Live View image is displayed, you can press the button to select the AF mode on the Quick Control screen (→ ).
Changing the Autofocus Mode the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.56). Y P O u (Face detection) Live Mode: c C With the same AF method as the Live mode, human faces are detected and focused.
Changing the Autofocus Mode the subject. 2 Focus Press the shutter button halfway and the camera will focus the face covered by the
frame. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture. 3 TakeCheck the focus and exposure, then Y P O press the shutter button completely to take the picture (p.
Changing the Autofocus Mode Quick Mode: f The dedicated AF sensor is used to focus in One-Shot AF mode (→ ), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. AF point 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. The small boxes on the screen are the AF points, and the larger box is the magnifying frame.
Changing the Autofocus Mode the subject. 3 Focus Aim the AF points over the subject and press the shutter button halfway. X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the AF point which achieved focus will turn green and the Live View image will reappear. X If focus is not achieved, the AF point will turn orange and blink. the picture.
MF: Focusing Manually You can magnify the image and focus precisely manually. 1 Set the lens focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Move Press the key to move the Magnifying frame magnifying frame to the position where you want to focus. To return the magnifying frame to the center, press <0>. Y P O the image. 3 Magnify Press the button. X The area within the magnifying frame C will be magnified.
Shooting Movies Y P O When you set the Mode Dial to , you can shoot HighDefinition (HD) movies. The movie recording format will be MOV. C For other functions, more details, and cautions related to movie shooting, see the Camera Instruction Manual (PDF) in the Camera Instruction Manual CD-ROM. Cards which can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 “ ” or higher.
k Shooting Movies When you set the shooting mode to , you can easily shoot HighDefinition (HD) movies with autoexposure. When playing movies, connecting the camera to a TV set is recommended (→ ). 1 Set the Mode Dial to . X The reflex mirror will make a sound, then the image will appear on the LCD monitor. the subject. 2 Focus Before shooting a movie, autofocus or manual focus (p.59-64). When you press the shutter button halfway, the camera will focus with the current AF mode. Y P O the movie.
k Shooting Movies About the Information Display Each time you press the button, the information display will change.
k Shooting Movies In the movie shooting mode, you cannot take a still photo even if you press the shutter button completely. During movie shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. A movie file is recorded each time you shoot a movie. The image’s field of view is approx. 99%. The ISO speed, shutter speed, and aperture are set automatically.
Image Playback Y P O This chapter explains the basic ways to playback images and movies. For other functions, more details, and cautions related to playback operations, see the Camera Instruction Manual (PDF) in the Camera Instruction Manual CDROM. C About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a computer or whose file name was changed.
x Image Playback 1 Playback the image. When you press the button, the last image captured will be displayed. an image. 2 Select To view images starting with the last image, press the key. To view images starting with the first (oldest) image, press the key. Each time you press the button, the display format will change. With basic information Histogram C Y P O Basic information + Image quality/Playback number Shooting information display the image playback.
k Playing Movies 1 Playback the image. Press the button to display images. a movie. 2 Select Press the key to select a C3 movie. On the single-image display, the <1s> icon displayed on the upper left indicates a movie. On the index display, the perforation on the left edge of the image indicates a movie. As movies cannot be played on the index display, press <0> to switch to the single-image display. Y P O On the single-image display, press <0>.
k Playing Movies Function Playback Description 2 Exit Returns to the single-image display. 7 Play Pressing <0> toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the key. The slow-motion speed is indicated on the upper right. 5 First frame Displays the movie’s first frame. Each time you press <0>, a single previous frame 3 Previous frame is displayed. If you hold down <0>, it will rewind the movie.
Viewing the Camera Instruction Manual CD-ROM / Software Start Guide Y P O This chapter explains how to view the PDF files in the Camera Instruction Manual CD-ROM and Software Instruction Manual CD-ROM. It also gives an overview of the software in the EOS DIGITAL Solution Disk CDROM and explains how to install them on a personal computer.
Viewing the Camera Instruction Manual CD-ROM Camera Instruction Manual The Camera Instruction Manual CD-ROM contains the Camera Instruction Manual and Quick Reference Guide. Camera Instruction Manual (PDF file) Explains all the camera’s functions and operation procedures and includes also all the contents in this Basic Instruction Manual.
Viewing the Camera Instruction Manual CD-ROM the “START” file. 3 Double-click X The screen shown in step 4 will appear. The icon that appears will differ depending on your computer. on the name of the instruction manual 4 Click you want to view. Click on the name of the instruction manual under the desired language. C Y P O X The Instruction Manual/Quick Reference Guide in the desired language will be displayed.
Software Start Guide EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL cameras. EOS Utility With the camera connected to a personal computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can also use the personal computer to set various camera settings and shoot remotely with the computer connected to the camera. Digital Photo Professional Y P O This software is recommended for users who mainly shoot RAW images.
Software Start Guide Installing the Software Do not connect the camera to your computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed, install the software by following the steps below (the newer version will overwrite the previous version). 1 Insert EOS DIGITAL Solution Disk (CD-ROM). For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, then double-click on [Canon EOS Digital Installer].
Software Start Guide Software Instruction Manual Contains the Software Instruction Manuals. Copying and Viewing the Instruction Manual PDFs 1 Insert the [Software INSTRUCTION MANUAL] CD-ROM into your computer. 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop. 3 Copy the [English] folder to your computer. Y P O Instruction Manual PDFs with the names below are copied.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or registered trademark of HDMI Licensing LLC.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
MEMO C 82 Y P O
MEMO C Y P O 83
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
