Network Video Recording Software RM Series Administrator’s Manual

Installation

Setup

Note

• You can click [Change] to change the destination folder.

However, we recommend that you do not change the

destination.

• To check the available disk space on each drive of the

computer and the disk space required for installation, click

[Space].

• A dialog box asking you to specify the software to be

installed is displayed. If you click [Complete], proceed to the

step 6. If you click [Custom], the sample dialog box above is

displayed. Select which application to install, the Storage

Server or the Viewer. Click the application that you do not want

to install and select [This feature will not be available].

Note

• The IP address you set during installation can be changed

using the command line. See “Changing the Storage Server IP

Address” (p. 130) for details.

• When installing on a computer that has multiple network

interfaces, select the network interface to use in the [Network

adapter] list and the assigned IP address in the [IP address]

list.

• If you clear the [Add storage server programs to the Windows

Firewall exception list.] check box, you need to configure

Windows Firewall after the installation is complete. For details,

see “Windows Firewall Settings” (p. 37).

An icon appears on your desktop when the installation is

complete.

Click [Next].

Click [Install].

Click [Finish].

Click [Yes] to restart the computer.

Important

• You must restart the computer to enable the settings that

were made during the installation.

• You must configure the operating system after installation.

For details, see “Settings After Installation” (p. 37).

• If you reinstall this software after uninstalling it, the setting

configurations before uninstallation will not be retained.